A general strategy for nanohybrids synthesis via coupled competitive reactions controlled in a hybrid process

Microwave Synthesis of Au Nanoparticles in the Presence of Tetrahydrothiophenocucurbituril

The preparation of gold nanoparticles (AuNPs) from tetrachloroauric acid in the presence of tetrahydrothiophenocucurbit[n]uril (THTmQ[n]) has been effectively achieved in a microwave reactor. The reaction was performed in the presence of an excess of the tetrahydrothiopheno function in a partial reductant role, while the remainder formed AuNP-THTmQ[n] conjugates after the reduction was completed with formic acid. An affinity for the AuNPs by the THTmQ[n] was observed in the purification of the NPs via centrifugation, removal of the supernatant and resuspension of the conjugate.

Nanomaterials in the environment: Behavior, fate, bioavailability, and effects-An updated review

The present review covers developments in studies of nanomaterials (NMs) in the environment since our much cited review in 2008. We discuss novel insights into fate and behavior, metrology, transformations, bioavailability, toxicity mechanisms, and environmental impacts, with a focus on terrestrial and aquatic systems. Overall, the findings were that: 1) despite substantial developments, critical gaps remain, in large part due to the lack of analytical, modeling, and field capabilities, and also due to the breadth and complexity of the area; 2) a key knowledge gap is the lack of data on environmental concentrations and dosimetry generally; 3) substantial evidence shows that there are nanospecific effects (different from the effects of both ions and larger particles) on the environment in terms of fate, bioavailability, and toxicity, but this is not consistent for all NMs, species, and relevant processes; 4) a paradigm is emerging that NMs are less toxic than equivalent dissolved materials but more toxic than the corresponding bulk materials; and 5) translation of incompletely understood science into regulation and policy continues to be challenging. There is a developing consensus that NMs may pose a relatively low environmental risk, but because of uncertainty and lack of data in many areas, definitive conclusions cannot be drawn. In addition, this emerging consensus will likely change rapidly with qualitative changes in the technology and increased future discharges. Environ Toxicol Chem 2018;37:2029-2063. © 2018 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals, Inc. on behalf of SETAC.

Biosynthesis of Ag nanoparticles using Salicornia bigelovii and its antibacterial activity

BACKGROUND AND AIM

In recent years, the field of nanotechnology has become the most active area of research in modern material science. While many chemical- as well as physical methods are also used, green synthesis of nanoparticles is becoming the most evolved method of synthesis. In this study, we synthesized silver nanoparticles from the seed extract of Salicornia bigelovii.

METHODS

This experimental study was conducted from December 2017 to January 2018 in Kerman University of Medical Sciences, Kerman, Iran. The effects of two concentrations (1m M and 4mM) on the synthesis of nanoparticles were studied. Characterizations were done using different methods including ultraviolet (UV) visible spectroscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). Antibacterial activity of Ag nanoparticles against Staphylococcus aureus and Escherichia coli was studied using microdilution method. The data were analyzed using Probit test in SPSS (Version 20, USA).

RESULTS

Formation of the AgNPs was confirmed by surface plasmon spectra using UV-Vis spectrophotometer and absorbance peaks at 434 nm. The FTIR spectra showed the possible role of the functional group like carbonyl groups in reduction of silver ions to silver nanoparticles. The XRD analysis showed that the synthesized silver nanoparticles are of face-centered cubic structure. The TEM showed the formation of silver nanoparticles ranging in diameter from 1 to 50 nm. The minimal inhibitory concentration and minimal bactericidal concentration of AgNPs were determined for both S. aureus and E. coli 6.25 and 12.5 μg/mL, respectively.

CONCLUSION

An environmentally friendly approach is more affordable than chemical methods. Physicochemical approaches can be harmful to the environment and to human health. Thus, the green synthesis methods are simple, less expensive, and can cut consumption of energy; they can be used for synthesis of fixed nanoparticles with preferred shape and size, without the use of toxic chemical agents.

Microfluidic Synthesis of Nanohybrids

Nanohybrids composed of two or more components exhibit many distinct physicochemical properties and hold great promise for applications in optics, electronics, magnetics, new energy, environment protection, and biomedical engineering. Microfluidic systems exhibit many advantages due to their unique characteristics of narrow channels, variable length, controllable number of channels and multiple integrations. Particularly their spatial-temporarily splitting of the formation stages during nanomaterials formation along the microfluidic channels favors the online control of the reaction kinetic parameters and in situ tuning of the product properties. This Review is focused on the features of the current types of microfluidic devices in the synthesis of different types of nanohybrids based on the classification of the four main kinds of materials: metal, nonmetal inorganic, polymer and composites. Their morphologies, compositions and properties can be adjusted conveniently in these synthesis systems. Synthesis advantages of varieties of microfluidic devices for specific nanohybrids of defined surfaces and interfaces are presented according to their process and microstructure features of devices as compared with conventional methods. A summary is presented, and challenges are put forward for the future development of the microfluidic synthesis of nanohybrids for advanced applications.

Surface and interface engineering of FePt/C nanocatalysts for electro-catalytic methanol oxidation: enhanced activity and durability

A methodology by coupling a microfluidic-batch process with in situ carbon-black mixing, successive annealing and de-alloying post-treatment was developed for engineering surface and interface microstructures of FePt/C nanocomposites. Ultra-small angular FePt nanocrystals rich in vertexes/terraces/steps and with Pt contents gradually increasing from the inner to the outer part can be synthesized at certain Fe/Pt atomic ratios (2/1 or 1.1/1), which can directly grow on carbon-black for enhanced nanocrystal-carbon interface interaction by introducing the in situ carbon-black mixing process. Composition and structure characterization suggests that FePt@(Fe_1-xPt_x)O_y(OH)_z/C nanocomposites with FePt alloy cores and surface Pt-doping hydroxyl iron oxide shells are formed after annealing. After controlled de-alloying of Fe in annealed nanocrystals with a Fe/Pt ratio of 2/1, the finally formed nanocatalysts exhibited excellent electrochemical catalytic performance using the methanol oxidation reaction as a model, preserving an activity of 1610 mA mg^-1 Pt^-1 (12 times the commercial Pt/C catalysts, higher than the best result (7.9 times the commercial Pt/C catalysts) just published in Science (Science, 2016, 354, 1410-1414), enhanced durability and high tolerance to CO poisoning.

Interfacial strain and defects in asymmetric Fe-Mn oxide hybrid nanoparticles

Asymmetric Fe-Mn oxide hybrid nanoparticles have been obtained by a seed-mediated thermal decomposition-based synthesis route. The use of benzyl ether as the solvent was found to promote the orientational growth of Mn1-xO onto the iron oxide nanocube seeds yielding mainly dimers and trimers whereas 1-octadecene yields large nanoparticles. HRTEM imaging and HAADF-STEM tomography performed on dimers show that the growth of Mn1-xO occurs preferentially along the edges of iron oxide nanocubes where both oxides share a common crystallographic orientation. Fourier filtering and geometric phase analysis of dimers reveal a lattice mismatch of 5% and a large interfacial strain together with a significant concentration of defects. The saturation magnetization is lower and the coercivity is higher for the Fe-Mn oxide hybrid nanoparticles compared to the iron oxide nanocube seeds.

Ferromagnetic resonance induced large microwave magnetodielectric effect in cerium doped Y3Fe5O12 ferrites

In recent years, multifunctional materials contained simultaneous ferroelectric and ferromagnetic ordering have been realized. Here, a real time room temperature adaptive materials system, which demonstrates an RF magnetodielectric (MD) response, i.e., Ce_xY_3−xFe₅O₁₂ (x = 0, 0.05, 0.1, 0.15, 0.2), is reported. The magnetic and dielectric properties of Ce-doped YIG microwave ferrites processed by a traditional ceramic route have been measured over a frequency range of 4–8 GHz (C-band). The substitution of Ce not only enhances the microwave electromagnetic properties of the YIG, but also modulates the magnetodielectric response. The maximum magnetodielectric response in Ce-doped YIG sample ranges in magnitude from approximately +5% to −5% under an applied field of 1.78 kOe. This effect was attributed to electron fluctuations on the Fe cation sites. Furthermore, the magnitude of the MD response was shown to be enhanced by the cerium content. It is believed that research of the magnetodielectric effect in YIG ferrites is of great importance to the development of next generation multifunctional adaptive microwave materials, devices and integrated circuits.

Ferromagnetic resonance induced large microwave magnetodielectric effect in cerium doped Y3Fe5O12 ferrites

In recent years, multifunctional materials contained simultaneous ferroelectric and ferromagnetic ordering have been realized. Here, a real time room temperature adaptive materials system, which demonstrates an RF magnetodielectric (MD) response, i.e., CexY3-xFe5O12 (x = 0, 0.05, 0.1, 0.15, 0.2), is reported. The magnetic and dielectric properties of Ce-doped YIG microwave ferrites processed by a traditional ceramic route have been measured over a frequency range of 4-8 GHz (C-band). The substitution of Ce not only enhances the microwave electromagnetic properties of the YIG, but also modulates the magnetodielectric response. The maximum magnetodielectric response in Ce-doped YIG sample ranges in magnitude from approximately +5% to -5% under an applied field of 1.78 kOe. This effect was attributed to electron fluctuations on the Fe cation sites. Furthermore, the magnitude of the MD response was shown to be enhanced by the cerium content. It is believed that research of the magnetodielectric effect in YIG ferrites is of great importance to the development of next generation multifunctional adaptive microwave materials, devices and integrated circuits.

Electrodic reduction of core–shell ferrite magnetic nanoparticles

The electro-activity of MFe₂O₄@γ-Fe₂O₃ (M = Mn, Co, Cu and Zn) nanoparticles occurs at the surface layer and reflects the surface environment.

Synthesis of Sn(1−x)Fex@FeySn(1−y)Oznanohybrids via a simple programmed microfluidic process

Two kinds of nanohybrids were synthesized successfully by a microfluidic process through tuning just the temperature.

Continuous synthesis of hedgehog-like Ag–ZnO nanoparticles in a two-stage microfluidic system

Hedgehog-like Ag–ZnO nanoparticles were successfully prepared in a continuous microfluidic system and showed a superior photocatalytic activity in the degradation of methyl orange.

Synthesis of silver nanoparticles in a microfluidic coaxial flow reactor

The coaxial flow reactor allows tuning of size and dispersity of silver nanoparticles because of its unique mass transfer characteristics.