Cell proliferation by silk gut incorporating FGF-2 protein microcrystals

A Bioengineering Approach for the Development of Fibroblast Growth Factor-7-Functionalized Sericin Biomaterial Applicable for the Cultivation of Keratinocytes

Growth factors, including fibroblast growth factor-7 (FGF-7), are a group of proteins that stimulate various cellular processes and are often used with carriers to prevent the rapid loss of their activities. Sericin with great biocompatibility has been investigated as a proteinaceous carrier to enhance the stability of incorporated proteins. The difficulties in obtaining intact sericin from silkworm cocoons and the handling of growth factors with poor stability necessitate an efficient technique to incorporate the protein into a sericin-based biomaterial. Here, we report the generation of a transgenic silkworm line simultaneously expressing and incorporating FGF-7 into cocoon shells containing almost exclusively sericin. Growth-factor-functionalized sericin cocoon shells requiring simple lyophilization and pulverization processes were successfully used to induce the proliferation and migration of keratinocytes. Moreover, FGF-7 incorporated into sericin-cocoon powder exhibited remarkable stability, with more than 70% of bioactivity being retained after being stored as a suspension at 25 °C for 3 months. Transgenic sericin-cocoon powder was used to continuously supply biologically active FGF-7 to generate a three-dimensionally cultured keratinocyte model in vitro. The outcomes of this study propound a feasible approach to producing cytokine-functionalized sericin materials that are ready to use for cell cultivation.

Development of a cypovirus protein microcrystal-encapsulated Bacillus thuringiensis UV-tolerant and mosquitocidal δ-endotoxin

The δ-endotoxin Cry4Aa from Bacillus thuringiensis israelensis (Bti) has insecticidal characteristics specific to insects of the order Diptera. Although Cry4Aa has shown potential as an effective proteinaceous pesticide against mosquitoes, it has an ultraviolet (UV)-intolerant property that limits its outdoor use. Our previous research showed that protein microcrystal polyhedra from Bombyx mori cypovirus can encapsulate diverse foreign proteins and maintain long-term protein activity under hostile environmental conditions, including UV irradiation. In this study, we report the development of polyhedra encapsulating the Cry4Aa insecticidal activity domain by using a modified baculovirus expression system. We confirmed the oral intake of recombinant polyhedra introduced into the experimental environment by the larvae of a mosquito, Aedes albopictus, and delivery of encapsulated proteins into the digestive tract. The polyhedra encapsulating partial Cry4Aa showed mosquito larvicidal activity during incubation of larvae with 50% lethal-dose value of 23.717×10⁴ cubes for 10 Aedes albopictus larvae in 1 ml water. In addition, polyhedra showed a specific property to reduce the impact of UV-C irradiation on the activity of encapsulated partial Cry4Aa, thus demonstrating the effectiveness of encapsulating Bti δ-endotoxins inside polyhedra to increase the availability of proteinaceous pesticides for outdoor use for mosquito control.

Bioengineered Silkworm for Producing Cocoons with High Fibroin Content for Regenerated Fibroin Biomaterial-Based Applications

Silk fibroin exhibits high biocompatibility and biodegradability, making it a versatile biomaterial for medical applications. However, contaminated silkworm-derived substances in remnant sericin from the filature and degumming process can result in undesired immune reactions and silk allergy, limiting the widespread use of fibroin. Here, we established transgenic silkworms with modified middle silk glands, in which sericin expression was repressed by the ectopic expression of cabbage butterfly-derived cytotoxin pierisin-1A, to produce cocoons composed solely of fibroin. Intact, nondegraded fibroin can be prepared from the transgenic cocoons without the need for sericin removal by the filature and degumming steps that cause fibroin degradation. A wide-angle X-ray diffraction analysis revealed low crystallinity in the transgenic cocoons. However, nondegraded fibroin obtained from transgenic cocoons enabled the formation of fibroin sponges with varying densities by using 1–5% (v/v) alcohol. The effective chondrogenic differentiation of ATDC5 cells was induced following their cultivation on substrates coated with intact fibroin. Our results showed that intact, allergen-free fibroin can be obtained from transgenic cocoons without the need for sericin removal, providing a method to produce fibroin-based materials with high biocompatibility for biomedical uses.

Impacts of chemically different surfaces of implants on a biological activity of fibroblast growth factor-2-apatite composite layers formed on the implants

BACKGROUND

Implants coated with fibroblast growth factor-2 (FGF-2)-apatite composite layers were previously reported to enhance soft-tissue formation, bone formation, and angiogenesis around the implants owing to the biological activity of FGF-2. However, it is unclear whether the chemistries of the material and surface of implants have some impact on the retention of the biological activity of FGF-2 in FGF-2-apatite composite layers on them. Since magnitude of the impact should be evaluated for extensive application of the composite layer to coat various implants, following items were examined; (1) surface chemistries of six implants, (2) mitogenic activities of FGF-2 in FGF-2-apatite composite layers on the implants, and (3) improved synthesis method of the composite layer for retention of the mitogenic activity of FGF-2.

HYPOTHESIS

The biological activity of FGF-2 in the composite layer is affected by the chemistries of the material and surface of implants.

MATERIALS AND METHODS

Six commercial products of pins and screws having different surface chemistries were coated with FGF-2-apatite composite layers. The composite layers were quantitatively analyzed for calcium (Ca), phosphorus (P) and FGF-2, and also evaluated the mitogenic activities of FGF-2. Improvement of the synthesis method was then attempted using two pin products.

RESULTS

Each commercial product had a chemically and morphologically characteristic surface. FGF-2-apatite composite layers were formed on all the commercial products. Although the Ca, P, and FGF-2 contents (4.7±0.9μg/mm, 2.2±0.4μg/mm, and 21.1±3.7ng/mm, respectively) and the Ca/P molar ratios (1.69±0.01) of the composite layers were almost the same, rate of retention of the mitogenic activity of FGF-2 in the composite layers significantly decreased on some pin products (3/12-4/12). The decrease in rate of retention of the mitogenic activity of FGF-2 was prevented by a two-step synthesis method to form a composite layer on a precoating with calcium phosphate (9/12-12/12).

DISCUSSION

The chemistries of the implant surfaces had a significant impact on the retention of the mitogenic activity of FGF-2 in the composite layers formed on the implant. The two-step synthesis method was useful to retain mitogenic activity of FGF-2 regardless of the surface chemistries of the implants. The two-step synthesis method has potential to expand the applicability of FGF-2-apatite composite layers to a wider range of implants.

LEVEL OF EVIDENCE

III, Case control in vitro study.

Effects of transgenic silk materials that incorporate FGF-7 protein microcrystals on the proliferation and differentiation of human keratinocytes

The silk glands of silkworms produce large quantities of fibroin, which is a protein that can be physically processed and used as a biodegradable carrier for cell growth factors in tissue engineering applications. Meanwhile, protein microcrystals known as polyhedra, which are derived from cypovirus 1, have been used as a vehicle to protect and release encapsulated cell growth factors. We report the generation of transgenic silkworms that express recombinant fibroblast growth factor-7 (FGF-7) fused with the polyhedron-encapsulating signal in polyhedra produced in the middle (MSG) and posterior (PSG) silk glands. Immunofluorescence showed that polyhedra from silk glands are associated with FGF-7. The MSG and PSG from transgenic silkworms were processed into fine powdery materials, from which FGF-7 activity was released to stimulate the proliferation of human keratinocyte epidermal cells. Powders from PSGs exhibited higher FGF-7 activity than those from MSGs. Moreover, PSG powder showed a gradual release of FGF-7 activity over a long period and induced keratinocyte proliferation and differentiation in 3D culture to promote the formation of stratified epidermis expressing positive differentiation marker proteins. Our results indicate that powdery materials incorporating the FGF-7-polyhedra microcrystals from silk glands are valuable for developing cell/tissue engineering applications in vivo and in vitro.

Synergistic effect of co-immobilized FGF-2 and vitronectin-derived peptide on feeder-free expansion of induced pluripotent stem cells

Expansion of human induced pluripotent stem cells (h-iPSCs) on mouse derived feeder layers or murine cells secretions such as Matrigel hamper their clinical applications. Alternative methods have introduced novel substrates as stem cell niches or/and optimized combinations of humanized soluble factors as fully defined mediums. Accordingly vitronectin as a main part of ECM have been commercialized significantly as a stem cell niche-forming substrate. In this work, we used a functional peptide derived from vitronectin (VTN) and co-immobilized it with FGF-2 (as an indisputable ingredient of defined culture mediums) on chitosan film surface. After chemical and physical characterization of the pristine chitosan surface as well as ones modified by VTN or/and FGF-2, h-iPS cells were cultured on them at the xeno/feeder-free conditions. Our results demonstrated that co-immobilization of these two biomolecules has a synergistic effect on adhesion and clonal growth of h-iPS cells with maintained expression of pluripotency markers in a FGF-2 density-dependent manner. This is the first report of co-immobilization of an ECM derived molecule and a growth factor for stem cell culture.

Ultrathin Graphene-Protein Supercapacitors for Miniaturized Bioelectronics

Nearly all implantable bioelectronics are powered by bulky batteries which limit device miniaturization and lifespan. Moreover, batteries contain toxic materials and electrolytes that can be dangerous if leakage occurs. Herein, an approach to fabricate implantable protein-based bioelectrochemical capacitors (bECs) employing new nanocomposite heterostructures in which 2D reduced graphene oxide sheets are interlayered with chemically modified mammalian proteins, while utilizing biological fluids as electrolytes is described. This protein-modified reduced graphene oxide nanocomposite material shows no toxicity to mouse embryo fibroblasts and COS-7 cell cultures at a high concentration of 1600 μg mL^-1 which is 160 times higher than those used in bECs, unlike the unmodified graphene oxide which caused toxic cell damage even at low doses of 10 μg mL^-1. The bEC devices are 1 μm thick, fully flexible, and have high energy density comparable to that of lithium thin film batteries. COS-7 cell culture is not affected by long-term exposure to encapsulated bECs over 4 d of continuous charge/discharge cycles. These bECs are unique, protein-based devices, use serum as electrolyte, and have the potential to power a new generation of long-life, miniaturized implantable devices.

Bioengineered silkworms with butterfly cytotoxin-modified silk glands produce sericin cocoons with a utility for a new biomaterial

Genetically manipulated organisms with dysfunction of specific tissues are crucial for the study of various biological applications and mechanisms. However, the bioengineering of model organisms with tissue-specific dysfunction has not progressed because the challenges of expression of proteins, such as cytotoxins, in living cells of individual organisms need to be overcome first. Here, we report the establishment of a transgenic silkworm (Bombyx mori) with posterior silk glands (PSGs) that was designed to express the cabbage butterfly (Pieris rapae) cytotoxin pierisin-1A (P1A). P1A, a homolog of the apoptosis inducer pierisin-1, had relatively lower DNA ADP ribosyltransferase activity than pierisin-1; it also induced the repression of certain protein synthesis when expressed in B. mori-derived cultured cells. The transgene-derived P1A domain harboring enzymatic activity was successfully expressed in the transgenic silkworm PSGs. The glands showed no apoptosis-related morphological changes; however, an abnormal appearance was evident. The introduced truncated P1A resulted in the dysfunction of PSGs in that they failed to produce the silk protein fibroin. Cocoons generated by the silkworms solely consisted of the glue-like glycoprotein sericin, from which soluble sericin could be prepared to form hydrogels. Embryonic stem cells could be maintained on the hydrogels in an undifferentiated state and proliferated through stimulation by the cytokines introduced into the hydrogels. Thus, bioengineering with targeted P1A expression successfully produced silkworms with a biologically useful trait that has significant application potential.

Large-scale production of bioactive recombinant human acidic fibroblast growth factor in transgenic silkworm cocoons

With an increasing clinical demand for functional therapeutic proteins every year, there is an increasing requirement for the massive production of bioactive recombinant human acidic fibroblast growth factor (r-haFGF). In this present study, we delicately explore a strategy for the mass production of r-haFGF protein with biological activity in the transgenic silkworm cocoons. The sequence-optimized haFGF was inserted into an enhanced sericin-1 expression system to generate the original transgenic silkworm strain, which was then further crossed with a PIG jumpstarter strain to achieve the remobilization of the expression cassette to a “safe harbor” locus in the genome for the efficient expression of r-haFGF. In consequence, the expression of r-haFGF protein in the mutant line achieved a 5.6-fold increase compared to the original strain. The high content of r-haFGF facilitated its purification and large-scald yields. Furthermore, the r-haFGF protein bioactively promoted the growth, proliferation and migration of NIH/3T3 cells, suggesting the r-haFGF protein possessed native mitogenic activity and the potential for wound healing. These results show that the silk gland of silkworm could be an efficient bioreactor strategy for recombinant production of bioactive haFGF in silkworm cocoons.