Directional nanotopographic gradients: a high-throughput screening platform for cell contact guidance

Diamond Surfaces with Lateral Gradients for Systematic Optimization of Surface Chemistry for Relaxometry - a Low-Pressure Plasma-Based Approach

Diamond is increasingly popular because of its unique material properties. Diamond defects called nitrogen vacancy (NV) centers allow for measurements with unprecedented sensitivity. However, to achieve ideal sensing performance, NV centers need to be within nanometers from the surface and are thus strongly dependent on the local surface chemistry. Several attempts have been made to compare diamond surfaces. However, due to the high price of diamond crystals with shallow NV centers, a limited number of chemical modifications have been studied. Here, we developed a systematic method to investigate the continuity of different local environments with varying densities and natures of surface groups in a single experiment on a single diamond plate. To achieve this goal, we used diamonds with a shallow ensemble of NV centers and introduced a chemical gradient across the surface. More specifically, we used air and hydrogen plasma. The gradients were formed by a low-pressure plasma treatment after masking with a right-angled triangular prism shield. As a result, the surface contained gradually more oxygen/hydrogen toward the open end of the shield. We then performed wide-field relaxometry to determine the effect of surface chemistry on the sensing performance. As expected, relaxation times and thus sensing performance indeed vary along the gradient.

Wrinkled topography regulates osteogenesis via autophagy-mediated Wnt/β-catenin signaling pathway in MC3T3-E1 cells

OBJECTIVE

In this study, we aimed to evaluate the effects of different dimensional wrinkled in topography on the osteogenic differentiation of MC3T3-E1 cells and explored the underlying mechanisms.

DESIGN

Polydimethylsiloxane (PDMS) with a wrinkled topography was synthesized using an elastomer base and crosslinking while observing by atomic force microscopy. MC3T3-E1 proliferation was detected by Cell Counting Kit-8(CCK-8) assays and the cell morphology was determined by phalloidin staining. Osteogenetic genes expression levels were measured by quantitative real-time polymerase chain reaction (qRT-PCR) and western blotting. In addition, Autophagy-related genes expression levels were evaluated by immunostaining and western blotting in MC3T3-E1 in order to assess the induction of autophagy.

RESULTS

In this experiment, the 0.7 µm amplitude and 3 µm wavelength (W3) group increased the expression of osteogenic markers, whereas the 4.3 µm amplitude and 27 µm wavelength (W27) group showed inhibition. Both the cytoplasm and the nucleus of β-catenin, compared with those of the Flat, W3 increased, whereas W27 decreased. At the same time, the autophagy was consistent with the influence of the topography on osteogenic differentiation. Moreover, using CQ or RAPA significantly inhibited or promoted autophagy, as well as partially decreasing or increasing osteogenesis, respectively. Infecting siRNA-β-catenin decreased the expression of RUNX2 and OSX in MC3T3-E1 cells both treated with CQ and RAPA.

CONCLUSIONS

Wrinkled topographies activated the autophagy-mediated Wnt/β-catenin signaling pathway and affected the osteogenic differentiation of MC3T3-E1 cells. The introduction of aligned topographies on biomaterial scaffolds could provide physical cues with which modulate MC3T3-E1 responses for bone engineering constructs.

A User's Guide to Machine Learning for Polymeric Biomaterials

The development of novel biomaterials is a challenging process, complicated by a design space with high dimensionality. Requirements for performance in the complex biological environment lead to difficult a priori rational design choices and time-consuming empirical trial-and-error experimentation. Modern data science practices, especially artificial intelligence (AI)/machine learning (ML), offer the promise to help accelerate the identification and testing of next-generation biomaterials. However, it can be a daunting task for biomaterial scientists unfamiliar with modern ML techniques to begin incorporating these useful tools into their development pipeline. This Perspective lays the foundation for a basic understanding of ML while providing a step-by-step guide to new users on how to begin implementing these techniques. A tutorial Python script has been developed walking users through the application of an ML pipeline using data from a real biomaterial design challenge based on group's research. This tutorial provides an opportunity for readers to see and experiment with ML and its syntax in Python. The Google Colab notebook can be easily accessed and copied from the following URL: www.gormleylab.com/MLcolab.

Pushing the Natural Frontier: Progress on the Integration of Biomaterial Cues toward Combinatorial Biofabrication and Tissue Engineering

The engineering of fully functional, biological-like tissues requires biomaterials to direct cellular events to a near-native, 3D niche extent. Natural biomaterials are generally seen as a safe option for cell support, but their biocompatibility and biodegradability can be just as limited as their bioactive/biomimetic performance. Furthermore, integrating different biomaterial cues and their final impact on cellular behavior is a complex equation where the outcome might be very different from the sum of individual parts. This review critically analyses recent progress on biomaterial-induced cellular responses, from simple adhesion to more complex stem cell differentiation, looking at the ever-growing possibilities of natural materials modification. Starting with a discussion on native material formulation and the inclusion of cell-instructive cues, the roles of shape and mechanical stimuli, the susceptibility to cellular remodeling, and the often-overlooked impact of cellular density and cell-cell interactions within constructs, are delved into. Along the way, synergistic and antagonistic combinations reported in vitro and in vivo are singled out, identifying needs and current lessons on the development of natural biomaterial libraries to solve the cell-material puzzle efficiently. This review brings together knowledge from different fields envisioning next-generation, combinatorial biomaterial development toward complex tissue engineering.

Barrier Diamond-like Carbon Coatings on Polydimethylsiloxane Substrate

The plasma modification of polydimethylsiloxane (PDMS) substrates is one way to change their surface geometry, which enables the formation of wrinkles. However, these changes are very often accompanied by the process of restoring the hydrophobic properties of the modified material. In this work, the RF PACVD device (radio frequency plasma-assisted chemical vapor deposition) was used, with which the plasma treatment of PDMS substrates was carried out in argon, nitrogen, oxygen, and methane atmospheres at variable negative biases ranging from 100 V to 500 V. The obtained results show the stability of contact angles for deionized water only in the case of surfaces modified by diamond-like carbon (DLC) coatings. The influence of the applied production conditions on the thickness (between 10 and 30 nm) and chemical structure (ID/IG between 0.41 and 0.8) of DLC coatings is discussed. In the case of plasma treatments with other gases introduced into the working chamber, the phenomenon of changing from hydrophilic to hydrophobic properties after the modification processes was observed. The presented results confirm the barrier nature of the DLC coatings produced on the PDMS substrate.

Stress-assisted gold micro-wrinkles on a polymer cantilever for cardiac tissue engineering

Surface topography of devices is crucial for cardiac tissue engineering. In this study, we fabricated a unique cantilever-based device, whose surface was structured with stress-assisted micro-wrinkles. The Au micro-wrinkle patterns on the cantilever surface helped the cardiomyocytes to grow similarly to those in the native cardiac tissues by aligning them and providing them a conductive surface, thereby enhancing the contractile properties of the cells. The patterned Au surface also enhanced the electrical conductivity during cell-to-cell interactions. Additionally, the expression levels of proteins related to intracellular adhesion and contraction significantly increased in the polymer cantilevers with metallic wrinkle patterns. The roles of the polymer cantilever in improving the electrical conductivity and force-sensing properties were confirmed. Thereafter, the cantilever's response to cardiotoxicity was evaluated by introducing drugs known to induce toxicity to cardiomyocytes. The proposed cantilever is a versatile device that may be used to screen drug-induced cardiotoxicity during drug development.

Fabrication approaches for high-throughput and biomimetic disease modeling

There is often a tradeoff between in vitro disease modeling platforms that capture pathophysiologic complexity and those that are amenable to high-throughput fabrication and analysis. However, this divide is closing through the application of a handful of fabrication approaches-parallel fabrication, automation, and flow-driven assembly-to design sophisticated cellular and biomaterial systems. The purpose of this review is to highlight methods for the fabrication of high-throughput biomaterial-based platforms and showcase examples that demonstrate their utility over a range of throughput and complexity. We conclude with a discussion of future considerations for the continued development of higher-throughput in vitro platforms that capture the appropriate level of biological complexity for the desired application. STATEMENT OF SIGNIFICANCE: There is a pressing need for new biomedical tools to study and understand disease. These platforms should mimic the complex properties of the body while also permitting investigation of many combinations of cells, extracellular cues, and/or therapeutics in high-throughput. This review summarizes emerging strategies to fabricate biomimetic disease models that bridge the gap between complex tissue-mimicking microenvironments and high-throughput screens for personalized medicine.

Modification of the surface nanotopography of implant devices: A translational perspective

There is an increasing need for the development of superior, safe, and more sophisticated implants, especially as our society historically has been moving towards an increasingly aging population. Currently, most research is being focused on the next generation of advanced medical implants, that are not only biocompatible but have modified surfaces that direct specific immunomodulation at cellular level. While there is a plethora of information on cell-surface interaction and how surfaces can be nanofabricated at research level, less is known about how the academic knowledge has been translated into clinical trials and commercial technologies. In this review, we provide a clinical translational perspective on the use of controlled physical surface modification of medical implants, presenting an analysis of data acquired from clinical trials and commercial products. We also evaluate the state-of-the-art of nanofabrication techniques that are being applied for implant surface modification at a clinical level. Finally, we identify some current challenges in the field, including the need of more advanced nanopatterning techniques, the comparatively small number of clinical trials and comment on future avenues to be explored for a successful clinical translation.

High-Throughput Routes to Biomaterials Discovery

Many existing clinical treatments are limited in their ability to completely restore decreased or lost tissue and organ function, an unenviable situation only further exacerbated by a globally aging population. As a result, the demand for new medical interventions has increased substantially over the past 20 years, with the burgeoning fields of gene therapy, tissue engineering, and regenerative medicine showing promise to offer solutions for full repair or replacement of damaged or aging tissues. Success in these fields, however, inherently relies on biomaterials that are engendered with the ability to provide the necessary biological cues mimicking native extracellular matrixes that support cell fate. Accelerating the development of such "directive" biomaterials requires a shift in current design practices toward those that enable rapid synthesis and characterization of polymeric materials and the coupling of these processes with techniques that enable similarly rapid quantification and optimization of the interactions between these new material systems and target cells and tissues. This manuscript reviews recent advances in combinatorial and high-throughput (HT) technologies applied to polymeric biomaterial synthesis, fabrication, and chemical, physical, and biological screening with targeted end-point applications in the fields of gene therapy, tissue engineering, and regenerative medicine. Limitations of, and future opportunities for, the further application of these research tools and methodologies are also discussed.

Controlling line defects in wrinkling: a pathway towards hierarchical wrinkling structures

We demonstrate a novel approach for controlling the line defect formation in microscopic wrinkling structures by patterned plasma treatment of elastomeric surfaces. Wrinkles were formed on polydimethylsiloxane (PDMS) surfaces exposed to low-pressure plasma under uniaxial stretching and subsequent relaxation. The wrinkling wavelength λ can be regulated via the treatment time and choice of plasma process gases (H2, N2). Sequential masking allows for changing these parameters on micron-scale dimensions. Thus, abrupt changes of the wrinkling wavelength become feasible and result in line defects located at the boundary zone between areas of different wavelengths. Wavelengths, morphology, and mechanical properties of the respective areas are investigated by Atomic Force Microscopy and agree quantitatively with predictions of analytical models for wrinkle formation. Notably, the approach allows for the first time the realization of a dramatic wavelength change up to a factor of 7 to control the location of the branching zone. This allows structures with a fixed but also with a strictly alternating branching behavior. The morphology inside the branching zone is compared with finite element methods and shows semi-quantitative agreement. Thus our finding opens new perspectives for "programming" hierarchical wrinkling patterns with potential applications in optics, tribology, and biomimetic structuring of surfaces.

High-throughput hyaluronic acid hydrogel arrays for cell selective adhesion screening

As a component of extracellular matrix (ECM), hyaluronic acid (HA) has plenty of applications in the biomedical field such as tissue engineering. Due to its non-adhesive nature, HA requires further grafting of functional molecules for cell related study. RGD and YIGSR are two kinds of cell adhesion peptides. YIGSR enhances endothelial cell (EC) adhesion, which is important for endothelialization after implantation of stents to prevent in-stent restenosis. However, the effect of combined densities of these peptides for EC and smooth muscle cell (SMC) adhesion has not been explored in a quantitative and high-throughput manner. In this work, single or orthogonal gradient densities of RGD and YIGSR were grafted onto the HA hydrogel array surfaces using thiol-norbornene click chemistry. Optimized peptide combinations for EC preponderant adhesion were found in hydrogel arrays and confirmed by scaling samples.

Multifunctional Surfaces for Improving Soft Tissue Integration

Metallic implants are widely used in diverse clinical applications to aid in recovery from lesions or to replace native hard tissues. However, the lack of integration of metallic surfaces with soft tissue interfaces causes the occurrence of biomaterial-associated infections, which can trigger a complicated inflammatory response and, ultimately, implant failure. Here, a multifunctional implant surface showing nanoscale anisotropy, based on the controlled deposition of cellulose nanocrystals (CNC), and biological activity derived from platelet lysate (PL) biomolecules sequestered and presented on CNC surface, is proposed. The anisotropic radial nanopatterns are produced on polished titanium surfaces by spin-coating CNC at high speed. Furthermore, CNC surface chemistry allows to further sequester and form a coating of bioactive molecules derived from PL. The surface anisotropy provided by CNC guides fibroblasts growth and alignment up to 14 days of culture. Moreover, PL-derived biomolecules polarize macrophages toward the M2-like anti-inflammatory phenotype. These results suggest that the developed multifunctional surfaces can promote soft tissue integration to metallic implants and, at the same time, prevent bacterial invasion, tissue inflammation, and failure of biomedical metallic implants.

Topography-Mediated Myotube and Endothelial Alignment, Differentiation, and Extracellular Matrix Organization for Skeletal Muscle Engineering

Understanding the response of endothelial cells to aligned myotubes is important to create an appropriate environment for tissue-engineered vascularized skeletal muscle. Part of the native tissue environment is the extracellular matrix (ECM). The ECM is a supportive scaffold for cells and allows cellular processes such as proliferation, differentiation, and migration. Interstitial matrix and basal membrane both comprise proteinaceous and polysaccharide components for strength, architecture, and volume retention. Virtually all cells are anchored to their basal lamina. One of the physical factors that affects cell behavior is topography, which plays an important role on cell alignment. We tested the hypothesis that topography-driven aligned human myotubes promote and support vascular network formation as a prelude to in vitro engineered vascularized skeletal muscle. Therefore, we used a PDMS-based topography substrate to investigate the influence of pre-aligned myotubes on the network formation of microvascular endothelial cells. The aligned myotubes produced a network of collagen fibers and laminin. This network supported early stages of endothelial network formation.

High-Throughput Screening and Hierarchical Topography-Mediated Neural Differentiation of Mesenchymal Stem Cells

Biophysical factors such as anisotropic topography composed of micro/nanosized structures are important for directing the fate of human bone marrow-derived mesenchymal stem cells (hBM-MSCs) and have been applied to neuronal differentiation. Via high-throughput screening (HTS) methods based on topography gradients, the optimum topography is determined and translated toward a hierarchical architecture designed to mimic the nerve nano/microstructure. The polydimethylsiloxane (PDMS)-based topography gradient with amplitudes (A) from 541 to 3073 nm and wavelengths (W) between 4 and 30 µm is developed and the fate commitment of MSC toward neuron lineage is investigated. The hierarchical structures, combining nano- and microtopography (W0.3/W26 parallel/perpendicular) are fabricated to explore the combined topography effects on neuron differentiation. From the immunofluorescent staining results (Tuj1 and MAP2), the substrate characterized by W: 26 µm; A: 2.9 µm shows highest potential for promoting neurogenesis. Furthermore, the hierarchical features (W0.3/W26 parallel) significantly enhance neural differentiation. The hBM-MSCs on the hierarchical substrates exhibit a significantly lower percentage of nuclear Yes-associated protein (YAP)/TAZ and weaker cell contractility indicating that the promoted neurogenesis is mediated by the cell tension and YAP/TAZ pathway. This research provides new insight into designing biomaterials for applications in neural tissue engineering and contributes to the understanding of topography-mediated neuronal differentiation.

Topography-driven alterations in endothelial cell phenotype and contact guidance

Understanding how endothelial cell phenotype is affected by topography could improve the design of new tools for tissue engineering as many tissue engineering approaches make use of topography-mediated cell stimulation. Therefore, we cultured human pulmonary microvascular endothelial cells (ECs) on a directional topographical gradient to screen the EC vascular-like network formation and alignment response to nano to microsized topographies. The cell response was evaluated by microscopy. We found that ECs formed unstable vascular-like networks that aggregated in the smaller topographies and flat parts whereas ECs themselves aligned on the larger topographies. Subsequently, we designed a mixed topography where we could explore the network formation and proliferative properties of these ECs by live imaging for three days. Vascular-like network formation continued to be unstable on the topography and were only produced on the flat areas and a fibronectin coating did not improve the network stability. However, an instructive adipose tissue-derived stromal cell (ASC) coating provided the correct environment to sustain the vascular-like networks, which were still affected by the topography underneath. It was concluded that large microsized topographies inhibit vascular endothelial network formation but not proliferation and flat and nano/microsized topographies allow formation of early networks that can be stabilized by using an ASC instructive layer.

Screening as a strategy to drive regenerative medicine research

In the field of regenerative medicine, optimization of the parameters leading to a desirable outcome remains a huge challenge. Examples include protocols for the guided differentiation of pluripotent cells towards specialized and functional cell types, phenotypic maintenance of primary cells in cell culture, or engineering of materials for improved tissue interaction with medical implants. This challenge originates from the enormous design space for biomaterials, chemical and biochemical compounds, and incomplete knowledge of the guiding biological principles. To tackle this challenge, high-throughput platforms allow screening of multiple perturbations in one experimental setup. In this review, we provide an overview of screening platforms that are used in regenerative medicine. We discuss their fabrication techniques, and in silico tools to analyze the extensive data sets typically generated by these platforms.

Influence of Extracellular Mimicked Hierarchical Nano-Micro-Topography on the Bacteria/Abiotic Interface

The study of interfaces between engineered surfaces and prokaryotic cells is a subject whose actual relevance has been reinforced by the current outbreaks due to unknown viruses and antibiotic-resistant bacteria. Studies aiming at the development of antibacterial surfaces are based on two pillars: surface chemistry or topographical cues. This work reports the study of only the topographic aspect by the development of thin films of polyamide, which present attractive surface chemistry for bacterial adhesion. The same chemistry with only nano- or hierarchical nano- and micro-topography that mimics the extracellular matrix is obtained by sputter-depositing the thin films onto Si and polydimethylsiloxane (PDMS), respectively. The surface average roughness of the Si-modified surfaces was around 1 nm, while the hierarchical topography presented values from 750 to 1000 nm, with wavelengths and amplitudes ranging from 15–30 µm and 1–3 µm, respectively, depending on the deposition parameters. The surface topography, wettability, surface charge, and mechanical properties were determined and related to interface performance with two Gram+ and two Gram- bacterial strains. The overall results show that surfaces with only nano-topographic features present less density of bacteria, regardless of their cell wall composition or cell shape, if the appropriate surface chemistry is present.

Predicting gene expression using morphological cell responses to nanotopography

Cells respond in complex ways to their environment, making it challenging to predict a direct relationship between the two. A key problem is the lack of informative representations of parameters that translate directly into biological function. Here we present a platform to relate the effects of cell morphology to gene expression induced by nanotopography. This platform utilizes the ‘morphome’, a multivariate dataset of cell morphology parameters. We create a Bayesian linear regression model that uses the morphome to robustly predict changes in bone, cartilage, muscle and fibrous gene expression induced by nanotopography. Furthermore, through this model we effectively predict nanotopography-induced gene expression from a complex co-culture microenvironment. The information from the morphome uncovers previously unknown effects of nanotopography on altering cell–cell interaction and osteogenic gene expression at the single cell level. The predictive relationship between morphology and gene expression arising from cell-material interaction shows promise for exploration of new topographies.

The surface nanotopography of biomaterials direct cell behavior, but screening for desired effects is inefficient. Here, the authors introduce a platform that enables prediction of nanotopography-induced gene expression changes from changes in cell morphology, including in co-culture environments.

Cell Interactions with Size-Controlled Colloidal Monolayers: Toward Improved Coatings in Bone Tissue Engineering

The surface structure of biomaterials is of key importance to control its interactions with biological environments. Industrial fabrication and coating processes often introduce particulate nanostructures at implant surfaces. Understanding the cellular interaction with particle-based surface topologies and feature sizes in the colloidal length scale therefore offers the possibility to improve the biological response of synthetic biomaterials. Here, surfaces with controlled topography and regular feature sizes covering the relevant length scale of particulate coatings (100-1000 nm) are fabricated by colloidal templating. Using fluorescent microscopy, WST assay, and morphology analysis, results show that adhesion and attachment of bone-marrow derived murine stromal cells (ST2) are strongly influenced by the surface feature size while geometric details play an insignificant role. Quantitative analysis shows enhanced cell adhesion, spreading, viability, and activity when surface feature size decreases below 200 nm compared to flat surfaces, while larger feature sizes are detrimental to cell adhesion. Kinetic studies reveal that most cells on surfaces with larger features lose contact with the substrate over time. This study identifies colloidal templating as a simple method for creating highly defined model systems to investigate complex cell functions and provides design criteria for the choice of particulate coatings on commercial implant materials.

Flexible Hierarchical Wraps Repel Drug-Resistant Gram-Negative and Positive Bacteria

Healthcare acquired infections are a major human health problem, and are becoming increasingly troublesome with the emergence of drug resistant bacteria. Engineered surfaces that reduce the adhesion, proliferation, and spread of bacteria have promise as a mean of preventing infections and reducing the use of antibiotics. To address this need, we created a flexible plastic wrap that combines a hierarchical wrinkled structure with chemical functionalization to reduce bacterial adhesion, biofilm formation, and the transfer of bacteria through an intermediate surface. These hierarchical wraps were effective for reducing biofilm formation of World Health Organization-designated priority pathogens Gram positive methicillin-resistant Staphylococcus aureus (MRSA) and Gram negative Pseudomonas aeruginosa by 87 and 84%, respectively. In addition, these surfaces remain free of bacteria after being touched by a contaminated surface with Gram negative E. coli. We showed that these properties are the result of broad liquid repellency of the engineered surfaces and the presence of reduced anchor points for bacterial adhesion on the hierarchical structure. Such wraps are fabricated using scalable bottom-up techniques and form an effective cover on a variety of complex objects, making them superior to top-down and substrate-specific surface modification methods.

Rapid and Robust Coating Method to Render Polydimethylsiloxane Surfaces Cell-Adhesive

Polydimethylsiloxane (PDMS) is a synthetic material with excellent properties for biomedical applications because of its easy fabrication method, high flexibility, permeability to oxygen, transparency, and potential to produce high-resolution structures in the case of lithography. However, PDMS needs to be modified to support homogeneous cell attachments and spreading. Even though many physical and chemical methods, like plasma treatment or extracellular matrix coatings, have been developed over the last decades to increase cell-surface interactions, these methods are still very time-consuming, often not efficient enough, complex, and can require several treatment steps. To overcome these issues, we present a novel, robust, and fast one-step PDMS coating method using engineered anchor peptides fused to the cell-adhesive peptide sequence (glycine-arginine-glycine-aspartate-serine, GRGDS). The anchor peptide attaches to the PDMS surface predominantly by hydrophobic interactions by simply dipping PDMS in a solution containing the anchor peptide, presenting the GRGDS sequence on the surface available for cell adhesion. The binding performance and kinetics of the anchor peptide to PDMS are characterized, and the coatings are optimized for efficient cell attachment of fibroblasts and endothelial cells. Additionally, the applicability is proven using PDMS-based directional nanotopographic gradients, showing a lower threshold of 5 μm wrinkles for fibroblast alignment.

Screening of perfused combinatorial 3D microenvironments for cell culture

Biomaterials combining biochemical and biophysical cues to establish close-to-extracellular matrix (ECM) models have been explored for cell expansion and differentiation purposes. Multivariate arrays are used as material-saving and rapid-to-analyze platforms, which enable selecting hit-spotted formulations targeting specific cellular responses. However, these systems often lack the ability to emulate dynamic mechanical aspects that occur in specific biological milieus and affect physiological phenomena including stem cells differentiation, tumor progression, or matrix modulation. We report a tailor-made strategy to address the combined effect of flow and biochemical composition of three-dimensional (3D) biomaterials on cellular response. We suggest a simple-to-implement device comprising (i) a perforated platform accommodating miniaturized 3D biomaterials and (ii) a bioreactor that enables the incorporation of the biomaterial-containing array into a disposable perfusion chamber. The system was upscaled to parallelizable setups, increasing the number of analyzed platforms per independent experiment. As a proof-of-concept, porous chitosan scaffolds with 1 mm diameter were functionalized with combinations of 5 ECM and cell-cell contact-mediating proteins, relevant for bone and dental regeneration, corresponding to 32 protein combinatorial formulations. Mesenchymal stem cells adhesion and production of an early osteogenic marker were assessed on-chip on static and under-flow dynamic perfusion conditions. Different hit-spotted biomaterial formulations were detected for the different flow regimes using direct image analysis. Cell-binding proteins still poorly explored as biomaterials components - amelogenin and E-cadherin - were here shown as relevant cell response modulators. Their combination with ECM cell-binding proteins - fibronectin, vitronectin, and type 1 collagen - rendered specific biomaterial combinations with high cell adhesion and ALP production under flow. The developed versatile system may be targeted at widespread tissue regeneration applications, and as a disease model/drug screening platform. STATEMENT OF SIGNIFICANCE: A perfusion system that enables cell culture in arrays of three-dimensional biomaterials under dynamic flow is reported. The effect of 31 cell-binding protein combinations in the adhesion and alkaline phosphatase (ALP) production of mesenchymal stem cells was assessed using a single bioreactor chamber. Flow perfusion was not only assessed as a classical enhancer/accelerator of cell growth and early osteogenic differentiation. We hypothesized that flow may affect cell-protein interactions, and that key components driving cell response may differ under static or dynamic regimes. Indeed, hit-spotted formulations that elicited highest cell attachment and ALP production on static cell culture differed from the ones detected for dynamic flow assays. The impacting role of poorly studied proteins as E-cadherin and amelogenin as biomaterial components was highlighted.

Flexible and Stretchable PEDOT-Embedded Hybrid Substrates for Bioengineering and Sensory Applications

Herein, we introduce a flexible, biocompatible, robust and conductive electrospun fiber mat as a substrate for flexible and stretchable electronic devices for various biomedical applications. To impart the electrospun fiber mats with electrical conductivity, poly(3,4-ethylenedioxythiophene) (PEDOT), a conductive polymer, was interpenetrated into nitrile butadiene rubber (NBR) and poly(ethylene glycol) dimethacrylate (PEGDM) crosslinked electrospun fiber mats. The mats were fabricated with tunable fiber orientation, random and aligned, and displayed elastomeric mechanical properties and high conductivity. In addition, bending the mats caused a reversible change in their resistance. The cytotoxicity studies confirmed that the elastomeric and conductive electrospun fiber mats support cardiac cell growth, and thus are adaptable to a wide range of applications, including tissue engineering, implantable sensors and wearable bioelectronics.

Peptide nanostructures on nanofibers for peripheral nerve regeneration

Self-assembled peptide nanofibrous scaffolds with designer sequences, similar to neurite growth promoting molecules enhance the differentiation of neural stem cells. However, self-assembled peptide nanofibrous scaffolds lack the required mechanical strength to suffice to bridge long critical-sized peripheral nerve defects. Hence, there is a demand for a potential neural substrate, which could be biomimetic coupled with bioactive nanostructures to regrow the denuded axons towards the distal end. In the present study, we developed designer self-assembling peptide-based aligned poly(lactic-co-glycolic acid) (PLGA) nanofibrous scaffolds by simple surface coating of peptides or coelectrospinning. Retention of secondary structures of peptides in peptide-coated and cospun fibers was confirmed by circular dichroism spectroscopy. The rod-like peptide nanostructures enhance the typical bipolar morphology of Schwann cells. Although the peptide-coated PLGA scaffolds exhibited significant increase in Schwann cell proliferation than pristine PLGA and PLGA-peptide cospun scaffolds (p < .05), peptide cospun scaffolds demonstrated better cellular infiltration and significantly higher gene expression of neural cell adhesion molecule, glial fibrillary acidic protein, and peripheral myelin protein22 compared to the pristine PLGA and PLGA-peptide-coated scaffolds. Our results demonstrate the positive effects of aligned peptide coelectrospun scaffolds with biomimetic cell recognition motifs towards functional proliferation of Schwann cells. These scaffolds could subsequently repair peripheral nerve defects by augmenting axonal regeneration and functional nerve recovery.

Directional Topography Influences Adipose Mesenchymal Stromal Cell Plasticity: Prospects for Tissue Engineering and Fibrosis

Introduction

Progenitor cells cultured on biomaterials with optimal physical-topographical properties respond with alignment and differentiation. Stromal cells from connective tissue can adversely differentiate to profibrotic myofibroblasts or favorably to smooth muscle cells (SMC). We hypothesized that myogenic differentiation of adipose tissue-derived stromal cells (ASC) depends on gradient directional topographic features.

Methods

Polydimethylsiloxane (PDMS) samples with nanometer and micrometer directional topography gradients (wavelength (w) = 464-10, 990 nm; amplitude (a) = 49-3, 425 nm) were fabricated. ASC were cultured on patterned PDMS and stimulated with TGF-β1 to induce myogenic differentiation. Cellular alignment and adhesion were assessed by immunofluorescence microscopy after 24 h. After seven days, myogenic differentiation was examined by immunofluorescence microscopy, gene expression, and immunoblotting.

Results

Cell alignment occurred on topographies larger than w = 1758 nm/a = 630 nm. The number and total area of focal adhesions per cell were reduced on topographies from w = 562 nm/a = 96 nm to w = 3919 nm/a = 1430 nm. Focal adhesion alignment was increased on topographies larger than w = 731 nm/a = 146 nm. Less myogenic differentiation of ASC occurred on topographies smaller than w = 784 nm/a = 209 nm.

Conclusion

ASC adherence, alignment, and differentiation are directed by topographical cues. Our evidence highlights a minimal topographic environment required to facilitate the development of aligned and differentiated cell layers from ASC. These data suggest that nanotopography may be a novel tool for inhibiting fibrosis.

Bacterial Cellulose Promotes Long-Term Stemness of mESC

Stem cells possess unique properties, such as the ability to self-renew and the potential to differentiate into an organism's various cell types. These make them highly valuable in regenerative medicine and tissue engineering. Their properties are precisely regulated in vivo through complex mechanisms that include multiple cues arising from the cell interaction with the surrounding extracellular matrix, neighboring cells, and soluble factors. Although much research effort has focused on developing systems and materials that mimic this complex microenvironment, the controlled regulation of differentiation and maintenance of stemness in vitro remains elusive. In this work, we demonstrate, for the first time, that the nanofibrous bacterial cellulose (BC) membrane derived from Komagataeibacter xylinus can inhibit the differentiation of mouse embryonic stem cells (mESC) under long-term conditions (17 days), improving their mouse embryonic fibroblast (MEF)-free cultivation in comparison to the MEF-supported conventional culture. The maintained cells' pluripotency was confirmed by the mESCs' ability to differentiate into the three germ layers (endo-, meso-, and ectoderm) after having been cultured on the BC membrane for 6 days. In addition, the culturing of mESCs on flexible, free-standing BC membranes enables the quick and facile manipulation and transfer of stem cells between culture dishes, both of which significantly facilitate the use of stem cells in routine culture and various applications. To investigate the influence of the structural and topographical properties of the cellulose on stem cell differentiation, we used the cellulose membranes differing in membrane thickness, porosity, and surface roughness. This work identifies bacterial cellulose as a novel convenient and flexible membrane material enabling long-term maintenance of mESCs' stemness and significantly facilitating the handling and culturing of stem cells.

Hierarchical Design of Tissue Regenerative Constructs

The worldwide shortage of organs fosters significant advancements in regenerative therapies. Tissue engineering and regeneration aim to supply or repair organs or tissues by combining material scaffolds, biochemical signals, and cells. The greatest challenge entails the creation of a suitable implantable or injectable 3D macroenvironment and microenvironment to allow for ex vivo or in vivo cell-induced tissue formation. This review gives an overview of the essential components of tissue regenerating scaffolds, ranging from the molecular to the macroscopic scale in a hierarchical manner. Further, this review elaborates about recent pivotal technologies, such as photopatterning, electrospinning, 3D bioprinting, or the assembly of micrometer-scale building blocks, which enable the incorporation of local heterogeneities, similar to most native extracellular matrices. These methods are applied to mimic a vast number of different tissues, including cartilage, bone, nerves, muscle, heart, and blood vessels. Despite the tremendous progress that has been made in the last decade, it remains a hurdle to build biomaterial constructs in vitro or in vivo with a native-like structure and architecture, including spatiotemporal control of biofunctional domains and mechanical properties. New chemistries and assembly methods in water will be crucial to develop therapies that are clinically translatable and can evolve into organized and functional tissues.

Anisotropic Electrowetting on Wrinkled Surfaces: Enhanced Wetting and Dependency on Initial Wetting State

Electrowetting on dielectric (EWOD) on unidirectional microstructured surfaces has recently evoked significant interest as they can modulate the effect of electrowetting, and can thus find applications in directional wetting in microfluidic systems. However, the dependency of such EW phenomenon on their initial state of wetting and anisotropy is far from being well understood. The current study addresses the initial wetting states and their implication on the anisotropic electrowetting using a wrinkled EWOD platform. Herein we demonstrate a facile stampless and maskless structure generation technique to fabricate wrinkles of varying topography. Further, we have demonstrated alteration in the interfacial wetting conditions by modulating the wrinkle topography, and its effect on the droplet behavior during electrowetting. The capillary wicking-assisted electrowetting on these wrinkled surfaces is in specific direction dictated by the ordered wrinkles and prompts enhanced spreading of the droplet. We also demonstrate that while the enhancement of unidirectional electrowetting is stronger in conformal wetting state surfaces, composite wetting state surfaces depict a reversal in anisotropy.

Universal Method for Creating Hierarchical Wrinkles on Thin-Film Surfaces

One of the most interesting topics in physical science and materials science is the creation of complex wrinkled structures on thin-film surfaces because of their several advantages of high surface area, localized strain, and stress tolerance. In this study, a significant step was taken toward solving limitations imposed by the fabrication of previous artificial wrinkles. A universal method for preparing hierarchical three-dimensional wrinkle structures of thin films on a multiple scale (e.g., nanometers to micrometers) by sequential wrinkling with different skin layers was developed. Notably, this method was not limited to specific materials, and it was applicable to fabricating hierarchical wrinkles on all of the thin-film surfaces tested thus far, including those of metals, two-dimensional and one-dimensional materials, and polymers. The hierarchical wrinkles with multiscale structures were prepared by sequential wrinkling, in which a sacrificial layer was used as the additional skin layer between sequences. For example, a hierarchical MoS₂ wrinkle exhibited highly enhanced catalytic behavior because of the superaerophobicity and effective surface area, which are related to topological effects. As the developed method can be adopted to a majority of thin films, it is thought to be a universal method for enhancing the physical properties of various materials.

Alkali-Mediated Miscibility of Gelatin/Polycaprolactone for Electrospinning Homogeneous Composite Nanofibers for Tissue Scaffolding

Electrospun natural-synthetic composite nanofibers, which possess favorable biological and mechanical properties, have gained widespread attention in tissue engineering. However, the development of biomimetic nanofibers of hybrids remains a huge challenge due to phase separation of the polymer blends. Here, aqueous sodium hydroxide (NaOH) solution is proposed to modulate the miscibility of a representative natural-synthetic hybrid of gelatin (GT) and polycaprolactone (PCL) for electrospinning homogeneous composite nanofibers. Alkali-doped GT/PCL solutions and nanofibers examined at macroscopic, microscopic, and internal molecular levels demonstrate appropriate miscibility of GT and PCL after introducing the alkali dopant. Particularly, homogeneous GT/PCL nanofibers with smooth surface and uniform diameter are obtained when aqueous NaOH solution with a concentration of 10 m is used. The fibers become more hydrophilic and possess improved mechanical properties both in dry and wet conditions. Moreover, biocompatibility experiments show that stem cells adhere to and proliferate better on the alkali-modified nanofibers than the untreated one. This study provides a facile and effective approach to solve the phase separation issue of the synthetic-natural hybrid GT/PCL and establishes a correlation of compositionally and morphologically homogeneous composite nanofibers with respect to cell responses.

NanoTopoChip: High-throughput nanotopographical cell instruction

Surface topography is able to influence cell phenotype in numerous ways and offers opportunities to manipulate cells and tissues. In this work, we develop the Nano-TopoChip and study the cell instructive effects of nanoscale topographies. A combination of deep UV projection lithography and conventional lithography was used to fabricate a library of more than 1200 different defined nanotopographies. To illustrate the cell instructive effects of nanotopography, actin-RFP labeled U2OS osteosarcoma cells were cultured and imaged on the Nano-TopoChip. Automated image analysis shows that of many cell morphological parameters, cell spreading, cell orientation and actin morphology are mostly affected by the nanotopographies. Additionally, by using modeling, the changes of cell morphological parameters could by predicted by several feature shape parameters such as lateral size and spacing. This work overcomes the technological challenges of fabricating high quality defined nanoscale features on unprecedented large surface areas of a material relevant for tissue culture such as PS and the screening system is able to infer nanotopography - cell morphological parameter relationships. Our screening platform provides opportunities to identify and study the effect of nanotopography with beneficial properties for the culture of various cell types.

STATEMENT OF SIGNIFICANCE

The nanotopography of biomaterial surfaces can be modified to influence adhering cells with the aim to improve the performance of medical implants and tissue culture substrates. However, the necessary knowledge of the underlying mechanisms remains incomplete. One reason for this is the limited availability of high-resolution nanotopographies on relevant biomaterials, suitable to conduct systematic biological studies. The present study shows the fabrication of a library of nano-sized surface topographies with high fidelity. The potential of this library, called the 'NanoTopoChip' is shown in a proof of principle HTS study which demonstrates how cells are affected by nanotopographies. The large dataset, acquired by quantitative high-content imaging, allowed us to use predictive modeling to describe how feature dimensions affect cell morphology.

Screening Platform for Cell Contact Guidance Based on Inorganic Biomaterial Micro/nanotopographical Gradients

High-throughput screening (HTS) methods based on topography gradients or arrays have been extensively used to investigate cell-material interactions. However, it is a huge technological challenge to cost efficiently prepare topographical gradients of inorganic biomaterials due to their inherent material properties. Here, we developed a novel strategy translating PDMS-based wrinkled topography gradients with amplitudes from 49 to 2561 nm and wavelengths between 464 and 7121 nm to inorganic biomaterials (SiO2, Ti/TiO2, Cr/CrO3, and Al2O3) which are frequently used clinical materials. Optimal substratum conditions promoted human bone-marrow derived mesenchymal stem cell alignment, elongation, cytoskeleton arrangement, filopodia development as well as cell adhesion in vitro, which depended both on topography and interface material. This study displays a positive correlation between cell alignment and the orientation of cytoskeleton, filopodia, and focal adhesions. This platform vastly minimizes the experimental efforts both for inorganic material interface engineering and cell biological assessments in a facile and effective approach. The practical application of the HTS technology is expected to aid in the acceleration of developments of inorganic clinical biomaterials.

Surface Topography Guides Morphology and Spatial Patterning of Induced Pluripotent Stem Cell Colonies

The relevance of topographic cues for commitment of induced pluripotent stem cells (iPSCs) is largely unknown. In this study, we demonstrate that groove-ridge structures with a periodicity in the submicrometer range induce elongation of iPSC colonies, guide the orientation of apical actin fibers, and direct the polarity of cell division. Elongation of iPSC colonies impacts also on their intrinsic molecular patterning, which seems to be orchestrated from the rim of the colonies. BMP4-induced differentiation is enhanced in elongated colonies, and the submicron grooves impact on the spatial modulation of YAP activity upon induction with this morphogen. Interestingly, TAZ, a YAP paralog, shows distinct cytoskeletal localization in iPSCs. These findings demonstrate that topography can guide orientation and organization of iPSC colonies, which may affect the interaction between mechanosensors and mechanotransducers in iPSCs.

Miniaturized platform for high-throughput screening of stem cells

Over the past decades stem cells have gained great interest in clinical research, tissue engineering and regenerative medicine, due to their ability of self-renewal and potential to differentiate into the various cell types of the organism. The long-term maintenance of these unique properties and the control of stem cell differentiation in vitro, however, remains challenging, thus limiting their applicability in these fields. High-throughput screening (HTS) of stem cells is widely used by the researchers in order to gain more insight in the underlying mechanisms of stem cell fate as well as identifying compounds and factors maintaining stemness. However, limited availability and expandability of stem cells restricts the use of microtiter plates for HTS of stem cells emitting the urge for miniaturized platforms. This review highlights recent advances in the development of miniaturized platforms for HTS of stem cells and presents novel designs of miniaturized HTS systems.