Construction of a high-density linkage map and fine mapping of QTL for growth in Asian seabass

The male and female genomes of golden pompano (Trachinotus ovatus) provide insights into the sex chromosome evolution and rapid growth

INTRODUCTION

Golden pompano (Trachinotus ovatus) is economically significant important for offshore cage aquaculture in China and Southeast Asian countries. Lack of high-quality genomic data and accurate gene annotations greatly restricts its genetic breeding progress.

OBJECTIVES

To decode the mechanisms of sex determination and rapid growth in golden pompano and facilitate the sex- and growth-aimed genetic breeding.

METHODS

Genome assemblies of male and female golden pompano were generated using Illumina, PacBio, BioNano, genetic maps and Hi-C sequencing data. Genomic comparisons, whole genome re-sequencing of 202 F1 individuals, QTL mapping and gonadal transcriptomes were used to analyze the sex determining region, sex chromosome evolution, SNP loci, and growth candidate genes. Zebrafish model was used to investigate the functions of growth candidate gene.

RESULTS

Female (644.45 Mb) and male (652.12 Mb) genomes of golden pompano were assembled and annotated at the chromosome level. Both genomes are highly conserved and no new or highly differentiated sex chromosomes occur. A 3.5 Mb sex determining region on LG15 was identified, where Hsd17b1, Micall2 and Lmx1a were putative candidates for sex determination. Three SNP loci significantly linked to growth were pinpointed, and a growth-linked gene gpsstr1 was identified by locus BSNP1369 (G→C, 17489695, Chr23). Loss of sstr1a (homologue of gpsstr1) in zebrafish caused growth retardation.

CONCLUSION

This study provides insights into sex chromosome evolution, sex determination and rapid growth of golden pompano.

Construction of a high-density genetic linkage map and QTL mapping of growth and cold tolerance traits in Takifugu fasciatus

Takifugu fasciatus is an aquaculture species with high economic value. In recent years, problems such as environmental pollution and inbreeding have caused a serious decline in T. fasciatus germplasm resources. In this study, a high-density genetic linkage map was constructed by whole-genome resequencing. The map consists of 4891 bin markers distributed across 22 linkage groups (LGs), with a total genetic coverage of 2381.353 cM and a mean density of 0.535 cM. Quantitative trait locus (QTL) localization analysis showed that a total of 19 QTLs associated with growth traits of T. fasciatus in the genome-wide significance threshold range, distributed on 11 LGs. In addition, 11 QTLs associated with cold tolerance traits were identified, each scattered on a different LG. Furthermore, we used QTL localization analysis to screen out three candidate genes (IGF1, IGF2, ADGRB) related to growth in T. fasciatus. Meanwhile, we screened three candidate genes (HSP90, HSP70, and HMGB1) related to T. fasciatus cold tolerance. Our study can provide a theoretical basis for the selection and breeding of cold-tolerant or fast-growing T. fasciatus.

Combination of GWAS and FST-based approaches identified loci associated with economic traits in sugarcane

Sugarcane is a globally important plant for both sugar and biofuel production. Although conventional breeding has played an important role in increasing the productivity of sugarcane, it takes a long time to achieve breeding goals such as high yield and resistant to diseases. Molecular breeding, including marker-assisted breeding and genomic selection, can accelerate genetic improvement by selecting elites at the seedling stage with DNA markers. However, only a few DNA markers associated with important traits were identified in sugarcane. The purpose of this study was to identify DNA markers associated with sugar content, stalk diameter, and sugarcane top borer resistance. The sugarcane samples with trait records were genotyped using the restriction site-associated DNA sequencing (RADseq) technology. Using F_ST analysis and genome-wide association study (GWAS), a total of 9, 23 and 9 DNA variants (single nucleotide polymorphisms (SNPs)/insertions and deletions (indels)) were associated with sugar content, stalk diameter, and sugarcane top borer resistance, respectively. The identified genetic variants were on different chromosomes, suggesting that these traits are complex and determined by multiple genetic factors. These DNA markers identified by both approaches have the potential to be used in selecting elite clones at the seeding stage in our sugarcane breeding program to accelerate genetic improvement. Certainly, it is essential to verify the reliability of the identified DNA markers associated with traits before they are used in molecular breeding in other populations.

Genomic selection for survival under naturally occurring Saprolegnia oomycete infection in farmed European whitefish Coregonus lavaretus

Saprolegnia oomycete infection causes serious economic losses and reduces fish health in aquaculture. Genomic selection based on thousands of DNA markers is a powerful tool to improve fish traits in selective breeding programs. Our goal was to develop a single nucleotide polymorphism (SNP) marker panel and to test its use in genomic selection for improved survival against Saprolegnia infection in European whitefish Coregonus lavaretus, the second most important farmed fish species in Finland. We used a double digest restriction site associated DNA (ddRAD) genotyping by sequencing method to produce a SNP panel, and we tested it analyzing data from a cohort of 1,335 fish, which were measured at different times for mortality to Saprolegnia oomycete infection and weight traits. We calculated the genetic relationship matrix (GRM) from the genome-wide genetic data, integrating it in multivariate mixed models used for the estimation of variance components and genomic breeding values (GEBVs), and to carry out Genome-Wide Association Studies for the presence of quantitative trait loci (QTL) affecting the phenotypes in analysis. We identified one major QTL on chromosome 6 affecting mortality to Saprolegnia infection, explaining 7.7% to 51.3% of genetic variance, and a QTL for weight on chromosome 4, explaining 1.8% to 5.4% of genetic variance. Heritability for mortality was 0.20 to 0.43 on the liability scale, and heritability for weight was 0.44 to 0.53. The QTL for mortality showed an additive allelic effect. We tested whether integrating the QTL for mortality as a fixed factor, together with a new GRM calculated excluding the QTL from the genetic data, would improve the accuracy estimation of GEBVs. This test was done through a cross-validation approach, which indicated that the inclusion of the QTL increased the mean accuracy of the GEBVs by 0.28 points, from 0.33 to 0.61, relative to the use of full GRM only. The area under the curve of the receiver-operator curve for mortality increased from 0.58 to 0.67 when the QTL was included in the model. The inclusion of the QTL as a fixed effect in the model increased the correlation between the GEBVs of early mortality with the late mortality, compared to a model that did not include the QTL. These results validate the usability of the produced SNP panel for genomic selection in European whitefish and highlight the opportunity for modeling QTLs in genomic evaluation of mortality due to Saprolegnia infection.

Genome-wide association study reveals the genetic basis of growth trait in yellow catfish with sexual size dimorphism

Sexual size dimorphism has been widely observed in a large number of animals including fish species. Genome-wide association study (GWAS) is a powerful tool to dissect the genetic basis of complex traits, whereas the sex-differences in the genomics of animal complex traits have been ignored in the GWAS analysis. Yellow catfish (Pelteobagrus fulvidraco) is an important aquaculture fish in China with significant sexual size dimorphism. In this study, GWAS was conducted to identify candidate SNPs and genes related to body length (BL) and body weight (BW) in 125 female yellow catfish from a breeding population. In total, one BL-related SNP and three BW-related SNPs were identified to be significantly associated with the traits. Besides, one of these SNPs (Chr15:19195072) was shared in both the BW and BL traits in female yellow catfish, which was further validated in 185 male individuals and located on the exon of stat5b gene. Transgenic yellow catfish and zebrafish that expressed yellow catfish stat5b showed increased growth rate and reduction of sexual size dimorphism. These results not only reveal the genetic basis of growth trait and sexual size dimorphism in fish species, but also provide useful information for the marker-assisted breeding in yellow catfish.

Genomic prediction of growth in a commercially, recreationally, and culturally important marine resource, the Australian snapper (Chrysophrys auratus)

Growth is one of the most important traits of an organism. For exploited species, this trait has ecological and evolutionary consequences as well as economical and conservation significance. Rapid changes in growth rate associated with anthropogenic stressors have been reported for several marine fishes, but little is known about the genetic basis of growth traits in teleosts. We used reduced genome representation data and genome-wide association approaches to identify growth-related genetic variation in the commercially, recreationally, and culturally important Australian snapper (Chrysophrys auratus, Sparidae). Based on 17,490 high-quality single-nucleotide polymorphisms and 363 individuals representing extreme growth phenotypes from 15,000 fish of the same age and reared under identical conditions in a sea pen, we identified 100 unique candidates that were annotated to 51 proteins. We documented a complex polygenic nature of growth in the species that included several loci with small effects and a few loci with larger effects. Overall heritability was high (75.7%), reflected in the high accuracy of the genomic prediction for the phenotype (small vs large). Although the single-nucleotide polymorphisms were distributed across the genome, most candidates (60%) clustered on chromosome 16, which also explains the largest proportion of heritability (16.4%). This study demonstrates that reduced genome representation single-nucleotide polymorphisms and the right bioinformatic tools provide a cost-efficient approach to identify growth-related loci and to describe genomic architectures of complex quantitative traits. Our results help to inform captive aquaculture breeding programs and are of relevance to monitor growth-related evolutionary shifts in wild populations in response to anthropogenic pressures.

A single intronic single nucleotide polymorphism in splicing site of steroidogenic enzyme hsd17b1 is associated with phenotypic sex in oyster pompano, Trachinotus anak

Teleosts show varied master sex determining (MSD) genes and sex determination (SD) mechanisms, with frequent turnovers of sex chromosomes. Tracing the origins of MSD genes and turnovers of sex chromosomes in a taxonomic group is of particular interest in evolutionary biology. Oyster pompano (Trachinotus anak), a marine fish, belongs to the family Carangidae, in which 17b-hydroxysteroid dehydrogenase 1 (hsd17b1) has repeatedly evolved to an MSD gene. Whole-genome resequencing identified a single nucleotide polymorphism (SNP) at chromosome 24 to be strictly associated with phenotypic sex, with females being the heterozygous sex. This SNP is located in a splicing site at the first exon/intron boundary of hsd17b1. The Z-linked SNP results in malfunction of all spliced isoforms, whereas the W-linked isoforms were predicted to have open reading frames that are conserved among vertebrates, suggesting that hsd17b1 is a female-determining gene. The differential alternative splicing patterns of ZZ and ZW genotypes were consistently observed both in undifferentiated stages and differentiated gonads. We observed elevated recombination around the SD locus and no differentiation between Z and W chromosomes. The extreme diversity of mutational mechanisms that hsd17b1 evolves to an MSD gene highlights frequent in situ turnovers between sex chromosomes in the Carangidae.

Scale Drop Disease Virus (SDDV) and Lates calcarifer Herpes Virus (LCHV) Coinfection Downregulate Immune-Relevant Pathways and Cause Splenic and Kidney Necrosis in Barramundi Under Commercial Farming Conditions

Marine farming of barramundi (Lates calcarifer) in Southeast Asia is currently severely affected by viral diseases. To better understand the biological implications and gene expression response of barramundi in commercial farming conditions during a disease outbreak, the presence of pathogens, comparative RNAseq, and histopathology targeting multiple organs of clinically “sick” and “healthy” juveniles were investigated. Coinfection of scale drop disease virus (SDDV) and L. calcarifer herpes virus (LCHV) were detected in all sampled fish, with higher SDDV viral loads in sick than in healthy fish. Histopathology showed that livers in sick fish often had moderate to severe abnormal fat accumulation (hepatic lipidosis), whereas the predominant pathology in the kidneys shows moderate to severe inflammation and glomerular necrosis. The spleen was the most severely affected organ, with sick fish presenting severe multifocal and coalescing necrosis. Principal component analysis (PC1 and PC2) explained 70.3% of the observed variance and strongly associated the above histopathological findings with SDDV loads and with the sick phenotypes, supporting a primary diagnosis of the fish being impacted by scale drop disease (SDD). Extracted RNA from kidney and spleen of the sick fish were also severely degraded likely due to severe inflammation and tissue necrosis, indicating failure of these organs in advanced stages of SDD. RNAseq of sick vs. healthy barramundi identified 2,810 and 556 differentially expressed genes (DEGs) in the liver and muscle, respectively. Eleven significantly enriched pathways (e.g., phagosome, cytokine-cytokine-receptor interaction, ECM-receptor interaction, neuroactive ligand-receptor interaction, calcium signaling, MAPK, CAMs, etc.) and gene families (e.g., tool-like receptor, TNF, lectin, complement, interleukin, chemokine, MHC, B and T cells, CD molecules, etc.) relevant to homeostasis and innate and adaptive immunity were mostly downregulated in sick fish. These DEGs and pathways, also previously identified in L. calcarifer as general immune responses to other pathogens and environmental stressors, suggest a failure of the clinically sick fish to cope and overcome the systemic inflammatory responses and tissue degeneration caused by SDD.

Toward Genome-Based Selection in Asian Seabass: What Can We Learn From Other Food Fishes and Farm Animals?

Due to the steadily increasing need for seafood and the plateauing output of fisheries, more fish need to be produced by aquaculture production. In parallel with the improvement of farming methods, elite food fish lines with superior traits for production must be generated by selection programs that utilize cutting-edge tools of genomics. The purpose of this review is to provide a historical overview and status report of a selection program performed on a catadromous predator, the Asian seabass (Lates calcarifer, Bloch 1790) that can change its sex during its lifetime. We describe the practices of wet lab, farm and lab in detail by focusing onto the foundations and achievements of the program. In addition to the approaches used for selection, our review also provides an inventory of genetic/genomic platforms and technologies developed to (i) provide current and future support for the selection process; and (ii) improve our understanding of the biology of the species. Approaches used for the improvement of terrestrial farm animals are used as examples and references, as those processes are far ahead of the ones used in aquaculture and thus they might help those working on fish to select the best possible options and avoid potential pitfalls.

Genome-Wide Marker Analysis for Traits of Economic Importance in Asian Seabass Lates calcarifer

To date, it is not known whether animal breeding values in Asian seabass (Lates calcarifer) can be estimated using single nucleotide polymorphisms (SNPs) generated from new high-throughput genotyping by sequencing platforms. The principal aim of the present study was to assess the genomic prediction accuracy for growth traits, survival, cannibalism, and disease resistance against Streptococcus iniae in this species L. calcarifer. Additionally, this study attempted to identify markers associated with the five traits studied as well as to understand if the genotype data can be used to estimate genetic parameters for these complex traits. The genomic best linear unbiased prediction (gBLUP) method was used to analyze 11,084 SNPs and showed that the prediction accuracies for growth traits (weight and length) were high (0.67–0.75). By contrast, these estimates for survival were low (0.25). Multi-locus mixed model analyses identified four SNPs significantly associated with body weight (p < 5 × 10−8 or −log10 p ≥ 5). There were, however, no significant associations detected for other traits. Similarly, the SNP heritability was moderate, while the estimates for other traits were approximated to zero and not significant. Genetic correlations between body weight and standard length were close to unity. Collectively, the results obtained from this study suggest that genotyping by sequencing platforms can provide informative DNA markers to conduct genome-wide association analysis, estimation of genetic parameters, and evaluation of genomic prediction accuracy for complex traits in Asian seabass.

A novel adult plant leaf rust resistance gene Lr2K38 mapped on wheat chromosome 1AL

Soft red winter wheat (SRWW) cultivar AGS 2038 has a high level of seedling and adult plant leaf rust (LR) resistance. To map and characterize LR resistance in AGS 2038, a recombinant inbred line (RIL) population consisting of 225 lines was developed from a cross between AGS 2038 and moderately resistant line UGA 111729. The parents and RIL population were phenotyped for LR response in three field environments at Plains and Griffin, GA, in the 2017-2018 and 2018-2019 growing seasons, one greenhouse environment at the adult-plant stage, and at seedling stage. The RIL population was genotyped with the Illumina iSelect 90K SNP marker array, and a total of 7667 polymorphic markers representing 1513 unique loci were used to construct a linkage map. Quantitative trait loci (QTL) analysis detected six QTL, QLr.ags-1AL, QLr.ags-2AS, QLr.ags-2BS1, QLr.ags-2BS2, QLr.ags-2BS3, and QLr.ags-2DS, for seedling and adult plant LR resistance. Of these, the major adult plant leaf rust resistance QTL, QLr.ags-1AL, was detected on all field and greenhouse adult plant tests and explained up to 34.45% of the phenotypic variation. QLr.ags-1AL, tightly flanked by IWB20487 and IWA4022 markers, was contributed by AGS 2038. Molecular marker analysis using a diagnostic marker linked to Lr59 showed that QLr.ags-1AL was different from Lr59, the only known LR resistance gene on 1AL. Therefore, the QTL was temporarily designated as Lr2K38. Lr2K38-linked marker IWB20487 was highly polymorphic among 30 SRWW lines and should be useful for selecting the Lr2K38 in wheat breeding programs.

A high-density SNP-based genetic map and several economic traits-related loci in Pelteobagrus vachelli

BACKGROUND

A high-density genetic linkage map is essential for QTL fine mapping, comparative genome analysis, identification of candidate genes and marker-assisted selection in aquaculture species. Pelteobagrus vachelli is a very popular commercial species in Asia. However, some specific characters hindered achievement of the traditional selective breeding based on phenotypes, such as lack of large-scale genomic resource and short of markers tightly associated with growth, sex determination and hypoxia tolerance related traits.

RESULTS

By making use of 5059 ddRAD markers in P. vachelli, a high-resolution genetic linkage map was successfully constructed. The map' length was 4047.01 cM by using an interval of 0.11 cm, which is an average marker standard. Comparative genome mapping revealed that a high proportion (83.2%) of markers with a one-to-one correspondence were observed between P. vachelli and P. fulvidraco. Based on the genetic map, 8 significant genome-wide QTLs for 4 weight, 1 body proportion, 2 sex determination, and 1 hypoxia tolerance related traits were detected on 4 LGs. Some SNPs from these significant genome-wide QTLs were observably associated with these phenotypic traits in other individuals by Kompetitive Allele Specific PCR. In addition, two candidate genes for weight, Sipa1 and HSD11B2, were differentially expressed between fast-, medium- and slow-growing P. vachelli. Sema7a, associated with hypoxia tolerance, was induced after hypoxia exposure and reoxygenation.

CONCLUSIONS

We mapped a set of suggestive and significant QTLs as well as candidate genes for 12 growth, 1 sex determination and 1 hypoxia tolerance related traits based on a high-density genetic linkage map by making use of SNP markers for P. fulvidraco. Our results have offered a valuable method about the much more efficient production of all-male, fast growth and hypoxia tolerance P. vachelli for the aquaculture industry.

First High-Density Linkage Map and QTL Fine Mapping for Growth-Related Traits of Spotted Sea bass (Lateolabrax maculatus)

Possessing powerful adaptive capacity and a pleasant taste, spotted sea bass (Lateolabrax maculatus) has a broad natural distribution and is one of the most popular mariculture fish in China. However, the genetic improvement program for this fish is still in its infancy. Growth is the most economically important trait and is controlled by quantitative trait loci (QTL); thus, the identification of QTLs and genetic markers for growth-related traits is an essential step for the establishment of marker-assisted selection (MAS) breeding programs. In this study, we report the first high-density linkage map of spotted sea bass constructed by sequencing 333 F1 generation individuals in a full-sib family using 2b-RAD technology. A total of 6883 SNP markers were anchored onto 24 linkage groups, spanning 2189.96 cM with an average marker interval of 0.33 cM. Twenty-four growth-related QTLs, including 13 QTLs for body weight and 11 QTLs for body length, were successfully detected, with phenotypic variance explained (PVE) ranging from 5.1 to 8.6%. Thirty potential candidate growth-related genes surrounding the associated SNPs were involved in cell adhesion, cell proliferation, cytoskeleton reorganization, calcium channels, and neuromodulation. Notably, the fgfr4 gene was detected in the most significant QTL; this gene plays a pivotal role in myogenesis and bone growth. The results of this study may facilitate marker-assisted selection for breeding populations and establish the foundation for further genomic and genetic studies investigating spotted sea bass.

A first genetic linage map construction and QTL mapping for growth traits in Larimichthys polyactis

Larimichthys polyactis is a commercially important marine fish species in Eastern Asia, yet very few genetic resources exist. In particular, genetic linkage maps are critical tools for genetic breeding. In this study, we generated a high resolution linkage map from a family of 110 individuals and their parents by resequencing the individuals. 3,802 effective SNPs were mapped to 24 linkage groups (LGs). The map spanned 2,567.39 cm, with an average marker interval of 0.66 cm. We used the map to conduct QTL analysis for growth traits, and found 31 markers were significantly associated with growth-related traits. Specifically, three SNPs were identified for total length, nineteen SNPs for body length, and nine SNPs for body weight. The identified SNPs could explain 15.2-22.6% of the phenotypic variation. SNPs associated with growth traits were distributed on LG6 and LG11, and candidate genes included, kif26b, bat1, gna1, gbgt1, and amfr, which may regulate growth. The linkage map and mapped QTLs would be useful for improving the quality of L. polyactis via marker-assisted selection.

ddRADseq-assisted construction of a high-density SNP genetic map and QTL fine mapping for growth-related traits in the spotted scat (Scatophagus argus)

BACKGROUND

Scatophagus argus is a popular farmed fish in several countries of Southeast Asia, including China. Although S. argus has a highly promising economic value, a significant lag of breeding research severely obstructs the sustainable development of aquaculture industry. As one of the most important economic traits, growth traits are controlled by multiple gene loci called quantitative trait loci (QTLs). It is urgently needed to launch a marker assisted selection (MAS) breeding program to improve growth and other pivotal traits. Thus a high-density genetic linkage map is necessary for the fine mapping of QTLs associated with target traits.

RESULTS

Using restriction site-associated DNA sequencing, 6196 single nucleotide polymorphism (SNP) markers were developed from a full-sib mapping population for genetic map construction. A total of 6193 SNPs were grouped into 24 linkage groups (LGs), and the total length reached 2191.65 cM with an average marker interval of 0.35 cM. Comparative genome mapping revealed 23 one-to-one and 1 one-to-two syntenic relationships between S. argus LGs and Larimichthys crocea chromosomes. Based on the high-quality linkage map, a total of 44 QTLs associated with growth-related traits were identified on 11 LGs. Of which, 19 significant QTLs for body weight were detected on 9 LGs, explaining 8.8-19.6% of phenotypic variances. Within genomic regions flanking the SNP markers in QTL intervals, we predicted 15 candidate genes showing potential relationships with growth, such as Hbp1, Vgll4 and Pim3, which merit further functional exploration.

CONCLUSIONS

The first SNP genetic map with a fine resolution of 0.35 cM for S. argus has been developed, which shows a high level of syntenic relationship with L. crocea genomes. This map can provide valuable information for future genetic, genomic and evolutionary studies. The QTLs and SNP markers significantly associated with growth-related traits will act as useful tools in gene mapping, map-based cloning and MAS breeding to speed up the genetic improvement in important traits of S. argus. The interesting candidate genes are promising for further investigations and have the potential to provide deeper insights into growth regulation in the future.

Construction of a High-Density Genetic Linkage Map and QTL Mapping for Growth-Related Traits in Takifugu bimaculatus

Takifugu bimaculatus is a euryhaline species, distributed ranging from the southern Yellow Sea to the South China Sea. Their tolerance to a wide range of salinity and temperature, coupled with a desirable firm texture, makes T. bimaculatus a strong candidate for Takifugu aquaculture in subtropics areas. Due to the increasing demand in markets and emerging of the Takifugu aquaculture industry, close attention has been paid to improvement on the T. bimaculatus production. In aquaculture, the great effort has been put into marker-assisted selective breeding, and efficient improvement was realized. However, few genetic resources on T. bimaculatus are provided so far. Aiming at understanding the genetic basis underlying important economic growth traits, facilitating genetic improvement and enriching the genetic resource in T. bimaculatus, we constructed the first genetic linkage map for T. bimaculatus via double digestion restriction-site association DNA sequencing and conducted quantitative traits locus (QTL) mapping for growth-related traits. The map comprised 1976 single nucleotide polymorphism markers distributed on 22 linkage groups (LG), with a total genetic distance of 2039.74 cM. Based on the linkage map, a chromosome-level assembly was constructed whereby we carried out comparative genomics analysis, verifying the high accuracy on contigs ordering of the linkage map. On the other hand, 18 QTLs associated with growth traits were detected on LG6, LG7, LG8, LG10, LG20, and LG21 with phenotypical variance ranging from 15.1 to 56.4%. Candidate genes participating in cartilage development, fat accumulation, and other growth-related regulation activities were identified from these QTLs, including col11a1, foxa2, and thrap3. The linkage map provided a solid foundation for chromosomes assembly and refinement. QTLs reported here unraveled the genomic architecture of some growth traits, which will advance the investigation of aquaculture breeding efforts in T. bimaculatus.

Quantitative Trait Loci (QTL) Mapping

Quantitative trait loci (QTL) are genetic regions that influence phenotypic variation of a complex trait, often through genetic interactions with each other and the environment. These are commonly identified through a statistical genetic analysis known as QTL mapping. Here, I present a step-by-step, practical approach to QTL mapping along with a sample data file. I focus on methods commonly used and discoveries that have been made in fishes, and utilize a multiple QTL mapping (MQM) approach in the free software package R/qtl.

Construction of a high-density genetic linkage map and mapping of quantitative trait loci for growth-related traits in silver carp (Hypophthalmichthys molitrix)

High-density genetic map and quantitative trait loci (QTL) mapping are powerful tools for identifying genomic regions that may be responsible for such polygenic trait as growth. A high-density genetic linkage map was constructed by sequencing 198 individuals in a F₁ family of silver carp (Hypophthalmichthys molitrix) in this study. This genetic map spans a length of 2,721.07 cM with 3,134 SNPs distributed on 24 linkage groups (LGs). Comparative genomic mapping presented a high level of syntenic relationship between silver carp and zebrafish. We detected one major and nineteen suggestive QTL for 4 growth-related traits (body length, body height, head length and body weight) at 6, 12 and 18 months post hatch (mph), explaining 10.2~19.5% of phenotypic variation. All six QTL for growth traits of 12 mph generally overlapped with QTL for 6 mph, while the majority of QTL for 18 mph were identified on two additional LGs, which may reveal a different genetic modulation during early and late muscle growth stages. Four potential candidate genes were identified from the QTL regions by homology searching of marker sequences against zebrafish genome. Hepcidin, a potential candidate gene identified from a QTL interval on LG16, was significantly associated with growth traits in the analyses of both phenotype-SNP association and mRNA expression between small-size and large-size groups of silver carp. These results provide a basis for elucidating the genetic mechanisms for growth and body formation in silver carp, a world aquaculture fish.

Construction of High-Resolution RAD-Seq Based Linkage Map, Anchoring Reference Genome, and QTL Mapping of the Sex Chromosome in the Marine Medaka Oryzias melastigma

Medaka (Oryzias sp.) is an important fish species in ecotoxicology and considered as a model species due to its biological features including small body size and short generation time. Since Japanese medaka Oryzias latipes is a freshwater species with access to an excellent genome resource, the marine medaka Oryzias melastigma is also applicable for the marine ecotoxicology. In genome era, a high-density genetic linkage map is a very useful resource in genomic research, providing a means for comparative genomic analysis and verification of de novo genome assembly. In this study, we developed a high-density genetic linkage map for O. melastigma using restriction-site associated DNA sequencing (RAD-seq). The genetic map consisted of 24 linkage groups with 2,481 single nucleotide polymorphism (SNP) markers. The total map length was 1,784 cM with an average marker space of 0.72 cM. The genetic map was integrated with the reference-assisted chromosome assembly (RACA) of O. melastigma, which anchored 90.7% of the assembled sequence onto the linkage map. The values of complete Benchmarking Universal Single-Copy Orthologs were similar to RACA assembly but N50 (23.74 Mb; total genome length 779.4 Mb; gap 5.29%) increased to 29.99 Mb (total genome length 778.7 Mb; gap 5.2%). Using MapQTL analysis with SNP markers, we identified a major quantitative trait locus for sex traits on the Om10. The integration of the genetic map with the reference genome of marine medaka will serve as a good resource for studies in molecular toxicology, genomics, CRISPR/Cas9, and epigenetics.

An SNP-Based Genetic Map and QTL Mapping for Growth Traits in the Red-Spotted Grouper (Epinephelus akaara)

The red-spotted grouper (Epinephelus akaara) is one of the most commercially important aquatic species in China. However, its seedstock has low larval survival rates, and its stability is confronted with the danger of overexploitation. In this study, a high-density genetic map was constructed using 3435 single nucleotide polymorphisms (SNPs) from 142 first generation (F₁) full-sib offspring and two parents of a red-spotted grouper population. The total genetic length of the map was 2300.12 cM with an average intermarker distance of 0.67 cM. Seventeen genome-wide significant quantitative trait loci (QTLs) for growth-related traits were detected on 24 linkage groups, including 5 QTLs for full length, 7 QTLs for body length, and 5 QTLs for body weight. The contribution values of explained phenotypic variance ranged from 10.7% to 12.9%. Moreover, 13 potential candidate genes for growth-related traits were identified. Collectively, these findings will be useful for conducting marker-assisted selection of the red-spotted grouper in future studies.

High-Density Linkage Map and Mapping for Sex and Growth-Related Traits of Largemouth Bass (Micropterus salmoides)

The largemouth bass is an important species, and its culture has risen sharply with the surge in fish aquaculture in China. Due to the lack of selective breeding technology for the largemouth bass, the growth rate and disease resistance are low, its sexual maturation is slow, and other serious problems are contributing to a sharp decline in the safety and quality of largemouth bass products in recent decades. Therefore, comprehensive breeding programs to improve the economic performance and promote the modern industrial development of largemouth bass must be considered a priority. Here, a total of 152 adult largemouth bass, including two parents and 150 progenies, were selected to produce the genetic mapping family. Then, a high-density linkage map was constructed based on restriction site–associated DNA sequencing using 6,917 single-nucleotide polymorphisms (SNPs) located in 24 linkage groups (LGs). The total genetic length of the linkage map was 1,261.96 cM, and the length of each LG varied from 24.72 cM for LG02 to 117.53 cM for LG16, with an average length of 52.58 cM and an average SNP number of 286. Thirteen significant quantitative trait loci (QTLs) for sex determination were located on LG04, LG05, LG08, LG12, LG15, LG21, and LG23. An informative QTL cluster that included six QTLs was detected on LG12. However, one notable QTL, which accounted for 71.48% of the total phenotypic variation, was located in the region of 1.85 cM on LG05. In addition, 32 identified QTLs were related to growth, including body weight, body length, body height, and head length. The QTLs for these growth-related traits are located in 13 LG regions and have little effect on phenotypic variation. This high-density genetic linkage map will enable the fine-mapping of economic traits and support the future genome assembly of the largemouth bass. Additionally, our study will be useful for future selective culture of largemouth bass and could potentially be used in molecular-assisted breeding of largemouth bass for aquaculture.

Mapping and Validating QTL for Fatty Acid Compositions and Growth Traits in Asian Seabass

Asian seabass is an important food fish species. While improving growth, increasing the nutritional value is important, omega-3 fatty acids are indispensable to human health. Identifying and validating DNA markers associated with traits is the first step towards marker-assisted selection (MAS). We quantified 13 different fatty acids and three growth traits in 213 F₂ Asian seabass from a family at the age 270 days post hatch, and screened QTL for these traits. The content of total fatty acids in 100 g flesh was 2.57 ± 0.80 g, while the proportions of docosahexaenoic acid (DHA) and eicosapentaenoic acid (EPA) were 16.96 ± 2.20% and 5.42 ± 0.90%, respectively. A linkage map with 2424 SNPs was constructed and used for QTL mapping. For fatty acid compositions, 14 significant QTL were identified on three linkage groups (LG5, LG11 and LG14), with phenotypic variance explained (PVE) from 12.8 to 24.6%. Thirty-nine suggestive QTL were detected on 16 LGs. Two significant QTL for EPA were identified on LG5 and LG14, with PVE of 15.2% and 15.1%, respectively. No significant QTL was identified for DHA. For growth traits, six significant and 13 suggestive QTL were identified on two and seven LGs, respectively. Only a few significant QTL for fatty acids overlapped with previously mapped QTL for these traits, suggesting that most QTL detected in a family are family-specific and could only be used in MAS in the family per se. To facilitate population-wide molecular breeding, more powerful methods (e.g. GWAS) should be used to identify SNPs for genomic selection.

Genome-Wide Association Study of Growth and Body-Shape-Related Traits in Large Yellow Croaker (Larimichthys crocea) Using ddRAD Sequencing

Large yellow croaker (Larimichthys crocea) is an economically important marine fish species of China. Due to overfishing and marine pollution, the wild stocks of this croaker have collapsed in the past decades. Meanwhile, the cultured croaker is facing the difficulties of reduced genetic diversity and low growth rate. To explore the molecular markers related to the growth traits of croaker and providing the related SNPs for the marker-assisted selection, we used double-digest restriction-site associated DNA (ddRAD) sequencing to dissect the genetic bases of growth traits in a cultured population and identify the SNPs that associated with important growth traits by GWAS. A total of 220 individuals were genotyped by ddRAD sequencing. After quality control, 27,227 SNPs were identified in 220 samples and used for GWAS analysis. We identified 13 genome-wide significant associated SNPs of growth traits on 8 chromosomes, and the beta P of these SNPs ranged from 0.01 to 0.86. Through the definition of candidate regions and gene annotation, candidate genes related to growth were identified, including important regulators such as fgf18, fgf1, nr3c1, cyp8b1, fabp2, cyp2r1, ppara, and ccm2l. We also identified SNPs and candidate genes that significantly associated with body shape, including bmp7, col1a1, col11a2, and col18a1, which are also economically important traits for large yellow croaker aquaculture. The results provided insights into the genetic basis of growth and body shape in large yellow croaker population and would provide reliable genetic markers for molecular marker-assisted selection in the future. Meanwhile, the result established a basis for our subsequent fine mapping and related gene study.

Constructing High-Density Genetic Maps and Developing Sexing Markers in Northern Snakehead (Channa argus)

High-density genetic maps are essential for mapping QTL, improving genome assembly, comparative genomics, and studying sex chromosome evolution. The northern snakehead (Channa argus) is an economically important foodfish species with significant sexual dimorphism, where the males grow much faster and bigger than the females. However, to date, the sex determination pattern is still not clear, limiting identification of sex chromosomes, even sex determination genes and development of monosex populations that are valuable for both sex evolution of vertebrates and aquaculture practices. Here, a sex-averaged map and two sex-specific genetic maps were constructed with 2974, 2323, and 2338 SNPs, respectively. Little difference was observed in the pattern of sex-specific recombination between female- and male-specific genetic maps. Genome scan identified a major locus for sex determination at LG16. Females and males are, respectively, homogametic and heterogametic, suggesting an XY sex determination system for this species. By resequencing genomes, InDels in the sex-associated QTL region were discovered and used for developing sex-specific PCR assays for fast sexing of snakehead. These high-density genetic maps provide useful resources for future genomic studies in snakehead and its related species. The PCR assays for sexing are of importance in developing all male populations for aquaculture.

High-Density Genetic Linkage Maps Provide Novel Insights Into ZW/ZZ Sex Determination System and Growth Performance in Mud Crab (Scylla paramamosain)

Mud crab, Scylla paramamosain is one of the most important crustacean species in global aquaculture. To determine the genetic basis of sex and growth-related traits in S. paramamosain, a high-density genetic linkage map with 16,701 single nucleotide polymorphisms (SNPs) was constructed using SLAF-seq and a full-sib family. The consensus map has 49 linkage groups, spanning 5,996.66 cM with an average marker-interval of 0.81 cM. A total of 516 SNP markers, including 8 female-specific SNPs segregated in two quantitative trait loci (QTLs) for phenotypic sex were located on LG32. The presence of female-specific SNP markers only on female linkage map, their segregation patterns and lower female: male recombination rate strongly suggest the conformation of a ZW/ZZ sex determination system in S. paramamosain. The QTLs of most (90%) growth-related traits were found within a small interval (25.18–33.74 cM) on LG46, highlighting the potential involvement of LG46 in growth. Four markers on LG46 were significantly associated with 10–16 growth-related traits. BW was only associated with marker 3846. Based on the annotation of transcriptome data, 11 and 2 candidate genes were identified within the QTL regions of sex and growth-related traits, respectively. The newly constructed high-density genetic linkage map with sex-specific SNPs, and the identified QTLs of sex- and growth-related traits serve as a valuable genetic resource and solid foundation for marker-assisted selection and genetic improvement of crustaceans.

Constructing a High-Density Genetic Linkage Map for Large Yellow Croaker (Larimichthys crocea) and Mapping Resistance Trait Against Ciliate Parasite Cryptocaryon irritans

The large yellow croaker (Larimichthys crocea) is the most economically important marine cage-farming fish in China in the past decade. However, the sustainable development of large yellow croaker aquaculture has been severely hampered by several diseases, of which, the white spot disease caused by ciliate protozoan parasite Cryptocaryon irritans ranks the most damaging disease in large yellow croaker cage farms. To better understand the genetic basis of parasite infection and disease resistance to C. irritans, it is vital to map the traits and localize the underlying candidate genes in L. crocea genome. Here, we constructed a high-density genetic linkage map using double-digest restriction-site associated DNA (ddRAD)-based high-throughput SNP genotyping data of a F1 mapping family, which had been challenged with C. irritans for resistant trait measure. A total of 5261 SNPs was grouped and oriented into 24 linkage groups (LGs), representing 24 chromosomes of L. crocea. The total genetic map length was 1885.67 cM with an average inter-locus distance of 0.36 cM. Quantitative trait loci (QTL) mapping identified seven significant QTLs in four LGs linked to C. irritans disease resistance. Candidate genes underlying disease resistance were identified from the reference genome, including ifnar1, ifngr2, ikbke, and CD112. Comparative genomic analysis between large yellow croaker and the four closely related species revealed high evolutionary conservation of chromosomes, though inter-chromosomal rearrangements do exist. Especially, the croaker genome structure was closer to the medaka genome than stickleback, indicating that the croaker genome might retain the teleost ancestral genome structure. The high-density genetic linkage map provides an important tool and resource for fine mapping, comparative genome analysis, and molecular selective breeding of large yellow croaker.

Construction of a High-Density Linkage Map and QTL Fine Mapping for Growth- and Sex-Related Traits in Channel Catfish (Ictalurus punctatus)

A high-density genetic linkage map is of particular importance in the fine mapping for important economic traits and whole genome assembly in aquaculture species. The channel catfish (Ictalurus punctatus), a species native to North America, is one of the most important commercial freshwater fish in the world. Outside of the United States, China has become the major producer and consumer of channel catfish after experiencing rapid development in the past three decades. In this study, based on restriction site associated DNA sequencing (RAD-seq), a high-density genetic linkage map of channel catfish was constructed by using single nucleotide polymorphisms (SNPs) in a F₁ family composed of 156 offspring and their two parental individuals. A total of 4,768 SNPs were assigned to 29 linkage groups (LGs), and the length of the linkage map reached 2,480.25 centiMorgans (cM) with an average distance of 0.55 cM between loci. Based on this genetic linkage map, 223 genomic scaffolds were anchored to the 29 LGs of channel catfish, and a total length of 704.66 Mb was assembled. Quantitative trait locus (QTL) mapping and genome-wide association analysis identified 10 QTLs of sex-related and six QTLs of growth-related traits at LG17 and LG28, respectively. Candidate genes associated with sex dimorphism, including spata2, spata5, sf3, zbtb38, and fox, were identified within QTL intervals on the LG17. A sex-linked marker with simple sequence repeats (SSR) in zbtb38 gene of the LG17 was validated for practical verification of sex in the channel catfish. Thus, the LG17 was considered as a sex-related LG. Potential growth-related genes were also identified, including important regulators such as megf9, npffr1, and gas1. In a word, we constructed the high-density genetic linkage map and developed the sex-linked marker in channel catfish, which are important genetic resources for future marker-assisted selection (MAS) of this economically important teleost.

Construction of a high-density linkage map and QTL mapping for important agronomic traits in Stylosanthes guianensis (Aubl.) Sw

Stylosanthes guianensis (Aubl.) Sw. is an economically important pasture and forage legume in tropical regions of the world. Genetic improvement of the crop can be enhanced through marker-assisted breeding. However, neither single nucleotide polymorphism (SNP) markers nor SNP-based genetic linkage map has been previously reported. In this study, a high-quality genetic linkage map of 2572 SNP markers for S. guianensis is generated using amplified-fragment single nucleotide polymorphism and methylation (AFSM) approach. The genetic map has 10 linkage groups (LGs), which spanned 2226.6 cM, with an average genetic distance of 0.87 cM between adjacent markers. Genetic mapping of quantitative trait loci (QTLs) for important agronomic traits such as yield-related and nutritional or quality-related traits was performed using F₂ progeny of a cross between a male-sterile female parent TPRC1979 and male parent TPRCR273 with contrasting phenotypes for morphological and physiological traits. A total of 30 QTLs for 8 yield-related traits and 18 QTLs for 4 nutritional or quality-related traits are mapped on the linkage map. Both the high-quality genetic linkage map and the QTL mapping for important agronomic traits described here will provide valuable genetic resources for marker-assisted selection for S. guianensis.

Genomic Selection in Aquaculture: Application, Limitations and Opportunities With Special Reference to Marine Shrimp and Pearl Oysters

Within aquaculture industries, selection based on genomic information (genomic selection) has the profound potential to change genetic improvement programs and production systems. Genomic selection exploits the use of realized genomic relationships among individuals and information from genome-wide markers in close linkage disequilibrium with genes of biological and economic importance. We discuss the technical advances, practical requirements, and commercial applications that have made genomic selection feasible in a range of aquaculture industries, with a particular focus on molluscs (pearl oysters, Pinctada maxima) and marine shrimp (Litopenaeus vannamei and Penaeus monodon). The use of low-cost genome sequencing has enabled cost-effective genotyping on a large scale and is of particular value for species without a reference genome or access to commercial genotyping arrays. We highlight the pitfalls and offer the solutions to the genotyping by sequencing approach and the building of appropriate genetic resources to undertake genomic selection from first-hand experience. We describe the potential to capture large-scale commercial phenotypes based on image analysis and artificial intelligence through machine learning, as inputs for calculation of genomic breeding values. The application of genomic selection over traditional aquatic breeding programs offers significant advantages through being able to accurately predict complex polygenic traits including disease resistance; increasing rates of genetic gain; minimizing inbreeding; and negating potential limiting effects of genotype by environment interactions. Further practical advantages of genomic selection through the use of large-scale communal mating and rearing systems are highlighted, as well as presenting rate-limiting steps that impact on attaining maximum benefits from adopting genomic selection. Genomic selection is now at the tipping point where commercial applications can be readily adopted and offer significant short- and long-term solutions to sustainable and profitable aquaculture industries.

Genome-wide association analysis for body weight identifies candidate genes related to development and metabolism in rainbow trout (Oncorhynchus mykiss)

Growth is one of the most important traits from both a physiological and economic perspective in aquaculture species. Thus, identifying the genomic regions and genes underpinning genetic variation for this trait is of particular interest in several fish species, including rainbow trout. In this work, we perform a genome-wide association study (GWAS) to identify the genomic regions associated with body weight at tagging (BWT) and at 18 months (BW18M) using a dense SNP panel (57 k) and 4596 genotyped rainbow trout from 105 full-sib families belonging to a Chilean breeding population. Analysis was performed by means of single-step GBLUP approach. Genetic variance explained by 20 adjacent SNP windows across the whole genome is reported. To further explore candidate genes, we focused on windows that explained the highest proportion of genetic variance in the top 10 chromosomes for each trait. The main window from the top 10 chromosomes was explored by BLAST using the first and last SNP position of each window to determine the target nucleotide sequence. As expected, the percentage of genetic variance explained by windows was relatively low, due to the polygenic nature of body weight. The most important genomic region for BWT and BW18M were located on chromosomes 15 and 24 and they explained 2.14% and 3.02% of the genetic variance for each trait, respectively. Candidate genes including several growth factors, genes involved in development of skeletal muscle and bone tissue and nutrient metabolism were identified within the associated regions for both traits BWT and BW18M. These results indicate that body weight is polygenic in nature in rainbow trout, with the most important loci explaining as much as 3% of the genetic variance for the trait. The genes identified here represent good candidates for further functional validation to uncover biological mechanisms underlying variation for growth in rainbow trout.

Construction of a high-density linkage map and QTL detection of downy mildew resistance in Vitis aestivalis-derived 'Norton'

A major QTL for downy mildew resistance was detected on chromosome 18 (Rpv27) in Vitis aestivalis-derived 'Norton' based on a high-resolution linkage map with SNP and SSR markers as well as 2 years of field and laboratory phenotyping data. Grapevine downy mildew caused by the oomycete Plasmopara viticola is one of the most widespread and destructive diseases, particularly in humid viticultural areas where it damages green tissues and defoliates vines. Traditional Vitis vinifera wine grape cultivars are susceptible to downy mildew whereas several North American and a few Asian cultivars possess various levels of resistance to this disease. To identify genetic determinants of downy mildew resistance in V. aestivalis-derived 'Norton,' a mapping population with 182 genotypes was developed from a cross between 'Norton' and V. vinifera 'Cabernet Sauvignon' from which a consensus map was constructed via 411 simple sequence repeat (SSR) markers. Using genotyping-by-sequencing, 3825 single nucleotide polymorphism (SNP) markers were also generated. Of these, 1665 SNP and 407 SSR markers were clustered into 19 linkage groups in 159 genotypes, spanning a genetic distance of 2203.5 cM. Disease progression in response to P. viticola was studied in this population for 2 years under both laboratory and field conditions, and strong correlations were observed among data sets (Spearman correlation coefficient = 0.57-0.79). A quantitative trait loci (QTL) analysis indicated a resistance locus on chromosome 18, here named Rpv27, explaining 33.8% of the total phenotypic variation. Flanking markers closely linked with the trait can be further used for marker-assisted selection in the development of new cultivars with resistance to downy mildew.

A high-density genetic linkage map and QTL mapping for growth and sex of yellow drum (Nibea albiflora)

A high-density genetic linkage map is essential for the studies of comparative genomics and gene mapping, and can facilitate assembly of reference genome. Herein, we constructed a high-density genetic linkage map with 8,094 SNPs selected from 113 sequenced fish of a F1 family. Ultimately, the consensus map spanned 3818.24 cM and covered nearly the whole genome (99.4%) with a resolution of 0.47 cM. 1,457 scaffolds spanning 435.15 Mb were anchored onto 24 linkage groups, accounting for 80.7% of the draft genome assembly of the yellow drum. Comparative genomic analyses with medaka and zebrafish genomes showed superb chromosome-scale synteny between yellow drum and medaka. QTL mapping and association analysis congruously revealed 22 QTLs for growth-related traits and 13 QTLs for sex dimorphism. Some important candidate genes such as PLA2G4A, BRINP3 and P2RY1 were identified from these growth-related QTL regions. A gene family including DMRT1, DMRT2 and DMRT3 was identified from these sex-related QTL regions on the linkage group LG9. We demonstrate that this linkage map can facilitate the ongoing marker-assisted selection and genomic and genetic studies for yellow drum.

Development and Validation of 58K SNP-Array and High-Density Linkage Map in Nile Tilapia (O. niloticus)

Despite being the second most important aquaculture species in the world accounting for 7.4% of global production in 2015, tilapia aquaculture has lacked genomic tools like SNP-arrays and high-density linkage maps to improve selection accuracy and accelerate genetic progress. In this paper, we describe the development of a genotyping array containing more than 58,000 SNPs for Nile tilapia (Oreochromis niloticus). SNPs were identified from whole genome resequencing of 32 individuals from the commercial population of the Genomar strain, and were selected for the SNP-array based on polymorphic information content and physical distribution across the genome using the Orenil1.1 genome assembly as reference sequence. SNP-performance was evaluated by genotyping 4991 individuals, including 689 offspring belonging to 41 full-sib families, which revealed high-quality genotype data for 43,588 SNPs. A preliminary genetic linkage map was constructed using Lepmap2 which in turn was integrated with information from the O_niloticus_UMD1 genome assembly to produce an integrated physical and genetic linkage map comprising 40,186 SNPs distributed across 22 linkage groups (LGs). Around one-third of the LGs showed a different recombination rate between sexes, with the female being greater than the male map by a factor of 1.2 (1632.9 to 1359.6 cM, respectively), with most LGs displaying a sigmoid recombination profile. Finally, the sex-determining locus was mapped to position 40.53 cM on LG23, in the vicinity of the anti-Müllerian hormone (amh) gene. These new resources has the potential to greatly influence and improve the genetic gain when applying genomic selection and surpass the difficulties of efficient selection for invasively measured traits in Nile tilapia.

The FTO Gene Is Associated with Growth and Omega-3/-6 Ratio in Asian Seabass

Polymorphisms in the FTO gene are associated with obesity and body mass index in humans and livestock. Little information of whether FTO plays an important role in aquaculture fish species is available. We cloned and characterized the FTO gene in an economically important food fish species: Asian seabass (Lates calcarifer). The full-length cDNA of the gene is 3679 bp, containing an ORF of 1935 bp encoding 644 amino acids, a 216 bp 5' UTR and a 1538 bp 3' UTR. The gene consisted of nine exons and eight introns and was 117,679 bp in length. Phylogenetic analysis revealed that the gene in Asian seabass was closely related to those of Japanese flounder and Nile tilapia. Analysis of its expressions using qRT-PCR showed that it was expressed ubiquitously, but was higher in the liver, stomach and intestine. Comparative analysis of the genomic sequences of part of intron 1 of the gene among 10 unrelated individuals identified two SNPs. Analysis of associations between SNPs and traits (i.e. growth, oil content, omega-3 and -6 contents) in an F₂ family demonstrated that the two SNPs were significantly associated with growth, oil content, omega-3 content and omega-3/-6 ratio. Altogether, our data suggest that the gene or/and its linked genes play an important role in growth and fatty acid synthesis, and that the SNPs associated with traits may be used as markers for selecting quicker growth and higher omega-3/-6 ratio at the fingerling stage.

Genomic Selection for Growth Traits in Pacific Oyster (Crassostrea gigas): Potential of Low-Density Marker Panels for Breeding Value Prediction

Pacific oysters are a key aquaculture species globally, and genetic improvement via selective breeding is a major target. Genomic selection has the potential to expedite genetic gain for key target traits of a breeding program, but has not yet been evaluated in oyster. The recent development of SNP arrays for Pacific oyster (Crassostrea gigas) raises the opportunity to test genomic selection strategies for polygenic traits. In this study, a population of 820 oysters (comprising 23 full-sibling families) were genotyped using a medium density SNP array (23 K informative SNPs), and the genetic architecture of growth-related traits [shell height (SH), shell length (SL), and wet weight (WW)] was evaluated. Heritability was estimated to be moderate for the three traits (0.26 ± 0.06 for SH, 0.23 ± 0.06 for SL and 0.35 ± 0.05 for WW), and results of a GWAS indicated that the underlying genetic architecture was polygenic. Genomic prediction approaches were used to estimate breeding values for growth, and compared to pedigree based approaches. The accuracy of the genomic prediction models (GBLUP) outperformed the traditional pedigree approach (PBLUP) by ∼25% for SL and WW, and ∼30% for SH. Further, reduction in SNP marker density had little impact on prediction accuracy, even when density was reduced to a few hundred SNPs. These results suggest that the use of genomic selection in oyster breeding could offer benefits for the selection of breeding candidates to improve complex economic traits at relatively modest cost.

Applications of genotyping by sequencing in aquaculture breeding and genetics

Selective breeding is increasingly recognized as a key component of sustainable production of aquaculture species. The uptake of genomic technology in aquaculture breeding has traditionally lagged behind terrestrial farmed animals. However, the rapid development and application of sequencing technologies has allowed aquaculture to narrow the gap, leading to substantial genomic resources for all major aquaculture species. While high-density single-nucleotide polymorphism (SNP) arrays for some species have been developed recently, direct genotyping by sequencing (GBS) techniques have underpinned many of the advances in aquaculture genetics and breeding to date. In particular, restriction-site associated DNA sequencing (RAD-Seq) and subsequent variations have been extensively applied to generate population-level SNP genotype data. These GBS techniques are not dependent on prior genomic information such as a reference genome assembly for the species of interest. As such, they have been widely utilized by researchers and companies focussing on nonmodel aquaculture species with relatively small research communities. Applications of RAD-Seq techniques have included generation of genetic linkage maps, performing genome-wide association studies, improvements of reference genome assemblies and, more recently, genomic selection for traits of interest to aquaculture like growth, sex determination or disease resistance. In this review, we briefly discuss the history of GBS, the nuances of the various GBS techniques, bioinformatics approaches and application of these techniques to various aquaculture species.

A high-resolution genetic linkage map and QTL fine mapping for growth-related traits and sex in the Yangtze River common carp (Cyprinus carpio haematopterus)

Background

A high-density genetic linkage map is essential for QTL fine mapping, comparative genome analysis, identification of candidate genes and marker-assisted selection for economic traits in aquaculture species. The Yangtze River common carp (Cyprinus carpio haematopterus) is one of the most important aquacultured strains in China. However, quite limited genetics and genomics resources have been developed for genetic improvement of economic traits in such strain.

Results

A high-resolution genetic linkage map was constructed by using 7820 2b-RAD (2b-restriction site-associated DNA) and 295 microsatellite markers in a F2 family of the Yangtze River common carp (C. c. haematopterus). The length of the map was 4586.56 cM with an average marker interval of 0.57 cM. Comparative genome mapping revealed that a high proportion (70%) of markers with disagreed chromosome location was observed between C. c. haematopterus and another common carp strain (subspecies) C. c. carpio. A clear 2:1 relationship was observed between C. c. haematopterus linkage groups (LGs) and zebrafish (Danio rerio) chromosomes. Based on the genetic map, 21 QTLs for growth-related traits were detected on 12 LGs, and contributed values of phenotypic variance explained (PVE) ranging from 16.3 to 38.6%, with LOD scores ranging from 4.02 to 11.13. A genome-wide significant QTL (LOD = 10.83) and three chromosome-wide significant QTLs (mean LOD = 4.84) for sex were mapped on LG50 and LG24, respectively. A 1.4 cM confidence interval of QTL for all growth-related traits showed conserved synteny with a 2.06 M segment on chromosome 14 of D. rerio. Five potential candidate genes were identified by blast search in this genomic region, including a well-studied multi-functional growth related gene, Apelin.

Conclusions

We mapped a set of suggestive and significant QTLs for growth-related traits and sex based on a high-density genetic linkage map using SNP and microsatellite markers for Yangtze River common carp. Several candidate growth genes were also identified from the QTL regions by comparative mapping. This genetic map would provide a basis for genome assembly and comparative genomics studies, and those QTL-derived candidate genes and genetic markers are useful genomic resources for marker-assisted selection (MAS) of growth-related traits in the Yangtze River common carp.

Electronic supplementary material

The online version of this article (10.1186/s12864-018-4613-1) contains supplementary material, which is available to authorized users.

High-Throughput Sequencing and Linkage Mapping of a Clownfish Genome Provide Insights on the Distribution of Molecular Players Involved in Sex Change

Clownfishes are an excellent model system for investigating the genetic mechanism governing hermaphroditism and socially-controlled sex change in their natural environment because they are broadly distributed and strongly site-attached. Genomic tools, such as genetic linkage maps, allow fine-mapping of loci involved in molecular pathways underlying these reproductive processes. In this study, a high-density genetic map of Amphiprion bicinctus was constructed with 3146 RAD markers in a full-sib family organized in 24 robust linkage groups which correspond to the haploid chromosome number of the species. The length of the map was 4294.71 cM, with an average marker interval of 1.38 cM. The clownfish linkage map showed various levels of conserved synteny and collinearity with the genomes of Asian and European seabass, Nile tilapia and stickleback. The map provided a platform to investigate the genomic position of genes with differential expression during sex change in A. bicinctus. This study aims to bridge the gap of genome-scale information for this iconic group of species to facilitate the study of the main gene regulatory networks governing social sex change and gonadal restructuring in protandrous hermaphrodites.

Identification of novel genes significantly affecting growth in catfish through GWAS analysis

Growth is the most important economic trait in aquaculture. Improvements in growth-related traits can enhance production, reduce costs and time to produce market-size fish. Catfish is the major aquaculture species in the United States, accounting for 65% of the US finfish production. However, the genes underlying growth traits in catfish were not well studied. Currently, the majority of the US catfish industry uses hybrid catfish derived from channel catfish female mated with blue catfish male. Interestingly, channel catfish and blue catfish exhibit differences in growth-related traits, and therefore the backcross progenies provide an efficient system for QTL analysis. In this study, we conducted a genome-wide association study for catfish body weight using the 250 K SNP array with 556 backcross progenies generated from backcross of male F1 hybrid (female channel catfish × male blue catfish) with female channel catfish. A genomic region of approximately 1 Mb on linkage group 5 was found to be significantly associated with body weight. In addition, four suggestively associated QTL regions were identified on linkage groups 1, 2, 23 and 24. Most candidate genes in the associated regions are known to be involved in muscle growth and bone development, some of which were reported to be associated with obesity in humans and pigs, suggesting that the functions of these genes may be evolutionarily conserved in controlling growth. Additional fine mapping or functional studies should allow identification of the causal genes for fast growth in catfish, and elucidation of molecular mechanisms of regulation of growth in fish.

Genotyping-by-Sequencing Derived High-Density Linkage Map and its Application to QTL Mapping of Flag Leaf Traits in Bread Wheat

Winter wheat parents ‘Harry’ (drought tolerant) and ‘Wesley’ (drought susceptible) were used to develop a recombinant inbred population with future goals of identifying genomic regions associated with drought tolerance. To precisely map genomic regions, high-density linkage maps are a prerequisite. In this study genotyping-by- sequencing (GBS) was used to construct the high-density linkage map. The map contained 3,641 markers distributed on 21 chromosomes and spanned 1,959 cM with an average distance of 1.8 cM between markers. The constructed linkage map revealed strong collinearity in marker order across 21 chromosomes with POPSEQ-v2.0, which was based on a high-density linkage map. The reliability of the linkage map for QTL mapping was demonstrated by co-localizing the genes to previously mapped genomic regions for two highly heritable traits, chaff color, and leaf cuticular wax. Applicability of linkage map for QTL mapping of three quantitative traits, flag leaf length, width, and area, identified 21 QTLs in four environments, and QTL expression varied across the environments. Two major stable QTLs, one each for flag leaf length (Qfll.hww-7A) and flag leaf width (Qflw.hww-5A) were identified. The map constructed will facilitate QTL and fine mapping of quantitative traits, map-based cloning, comparative mapping, and in marker-assisted wheat breeding endeavors.

QTL Mapping for Resistance to Iridovirus in Asian Seabass Using Genotyping-by-Sequencing

Identifying quantitative trait loci (QTL) for viral disease resistance is of particular importance in selective breeding programs of fish species. Genetic markers linked to QTL can be useful in marker-assisted selection (MAS) for elites resistant to specific pathogens. Here, we conducted a genome scan for QTL associated with Singapore grouper iridovirus (SGIV) resistance in an Asian seabass (Lates calcarifer) family, using a high-density linkage map generated with genotyping-by-sequencing. One genome-wide significant and three suggestive QTL were detected at LG21, LG6, LG13, and LG15, respectively. The phenotypic variation explained (PVE) by the four QTL ranged from 7.5 to 15.6%. The position of the most significant QTL at LG21 was located between 31.88 and 36.81 cM. The SNP marker (SNP130416) nearest to the peak of this QTL was significantly associated with SGIV resistance in an unrelated multifamily population. One candidate gene, MECOM, close to the peak of this QTL region, was predicted. Evidence of alternative splicing was observed for MECOM and one specific category of splicing variants was differentially expressed at 5 days post-SGIV infection. The QTL detected in this study are valuable resources and can be used in the selective breeding programs of Asian seabass with regard to resistance to SGIV.

Genome-Wide QTL Analysis Identified Significant Associations Between Hypoxia Tolerance and Mutations in the GPR132 and ABCG4 Genes in Nile Tilapia

Exposure to hypoxia induces both acute and chronic stress responses, which plays an important role in health of cultured organisms including growth, reproduction, immunity, and other energy demanding activities. Application of advanced genomic technologies allows rapid identification of hypoxia trait-associated genes and precise selection of superior brood stocks with high tolerance in tilapia. By applying QTL-seq and double-digest restriction-site associated DNA sequencing (ddRAD-seq) techniques, we identified four genome-wide significant quantitative trait loci (QTLs) for hypoxia tolerance and many suggestive QTLs in Nile tilapia. These QTLs explained 6.6-14.7% of the phenotypic variance. Further analysis revealed that single nucleotide polymorphisms (SNPs) in exons of both GPR132 and ABCG4 genes located in genome-wide QTL intervals were significantly associated with hypoxia-tolerant traits. Expression analysis of both genes suggested that they were strong candidate genes involved into hypoxia tolerance in tilapia. Our findings suggest that both QTL-seq and ddRAD-seq techniques can be effectively utilized in QTL mapping of hypoxia traits in fish. Our data supply a basis for further marker-assisted selection of super lines with a high level of tolerance against low oxygen stress in the tilapia.

Influence of epistatic segregation distortion loci on genetic marker linkages in Japanese flounder

For genetic linkage analysis of Japanese flounder, 160 doubled haploids (DH) were artificially produced using mitotic gynogenesis and were genotyped for 458 simple sequence repeat (SSR) markers, 101 of which show distortional segregation. The genetic linkage map was constructed by modifying recombination fractions between the distorted markers. Between the corrected and uncorrected genetic maps, there were considerable differences in genetic distance, but not in relative locations among markers. Using a liability model, a segregation distortion locus (SDL), with an additive genetic effect of 1.772, was mapped between markers BDHYP387 and Poli56TUF of chromosome 24 in the corrected genetic map. Additionally, six pairs of epistatic SDLs were identified on chromosomes 1, 5, 8, 9, 23, and 24. Changes in genetic distances between markers did not occur on chromosome regions with main effect SDLs. However, most chromosome regions where genetic distances changed covered the detected epistatic SDLs. This study concluded that epistatic SDLs decrease linkages between markers and lengthen genetic distances in Japanese flounder. This finding has been partially validated in other DH populations derived from three female Japanese flounders.

A High-Density Genetic Linkage Map and QTL Fine Mapping for Body Weight in Crucian Carp (Carassius auratus) Using 2b-RAD Sequencing

A high-resolution genetic linkage map is essential for a wide range of genetics and genomics studies such as comparative genomics analysis and QTL fine mapping. Crucian carp (Carassius auratus) is widely distributed in Eurasia, and is an important aquaculture fish worldwide. In this study, a high-density genetic linkage map was constructed for crucian carp using 2b-RAD technology. The consensus map contains 8487 SNP markers, assigning to 50 linkage groups (LGs) and spanning 3762.88 cM, with an average marker interval of 0.44 cM and genome coverage of 98.8%. The female map had 4410 SNPs, and spanned 3500.42 cM (0.79 cM/marker), while the male map had 4625 SNPs and spanned 3346.33 cM (0.72 cM/marker). The average recombination ratio of female to male was 2.13:1, and significant male-biased recombination suppressions were observed in LG47 and LG49. Comparative genomics analysis revealed a clear 2:1 syntenic relationship between crucian carp LGs and chromosomes of zebrafish and grass carp, and a 1:1 correspondence, but extensive chromosomal rearrangement, between crucian carp and common carp, providing evidence that crucian carp has experienced a fourth round of whole genome duplication (4R-WGD). Eight chromosome-wide QTL for body weight at 2 months after hatch were detected on five LGs, explaining 10.1-13.2% of the phenotypic variations. Potential candidate growth-related genes, such as an EGF-like domain and TGF-β, were identified within the QTL intervals. This high-density genetic map and QTL analysis supplies a basis for genome evolutionary studies in cyprinid fishes, genome assembly, and QTL fine mapping for complex traits in crucian carp.

Construction of a high-density linkage map and mapping of sex determination and growth-related loci in the mandarin fish (Siniperca chuatsi)

Background

The mandarin fish (Siniperca chuatsi) is an important and widely cultured fish in China. However, the lack of selective breeding of mandarin fish in previous decades has resulted in a decline in the growth rate of pond-cultured fish, a shortened period of sexual maturity, and reduced disease resistance; these issues seriously affect the quality and safety of the fish products. Therefore, it is necessary to establish a selective breeding program for the mandarin fish to improve the economical traits of the fish and to sustain the development of the mandarin fish industry.

Results

We constructed a high-density linkage map for it based on double digest restriction site associated DNA sequencing (ddRAD-Sequencing). This map contained 3283 dimorphic single nucleotide polymorphism markers and 24 linkage groups (LGs). The total map-length was 1972.01 cM, with an average interlocus distance of 0.61 cM. One significant quantitative trait locus (QTL) for sex determination trait was detected on LG23, which was supported by five markers, clustered between 60.27 and 68.71 cM. The highest logarithm of odds value (17.73) was located at 60.27 cM, near the marker r1_73194, accounting for 53.3% of the phenotypic variance. Genotypes of all the male fish on r1_33008 were homozygous, whereas those of all females were heterozygous. Thus, LG23 was considered a sex-related linkage group. Eleven significant QTLs, for three growth traits, at two growth stages and the increased values were distributed on four LGs; their contributions to the phenotypic variation were quite low (12.4–17.2%), suggesting that multiple genes affected the growth traits.

Conclusion

This high-resolution genetic map provides a valuable resource for fine-mapping of important traits and for identification of sex-related markers that should facilitate breeding of all-female mandarin fish for aquaculture and mechanistic studies on sex determination.

Electronic supplementary material

The online version of this article (doi:10.1186/s12864-017-3830-3) contains supplementary material, which is available to authorized users.

Genome-Wide Association Study Identifies Loci Associated with Resistance to Viral Nervous Necrosis Disease in Asian Seabass

Viral nervous necrosis disease (VNN), caused by nervous necrosis virus (NNV), is one major threat to mariculture. Identifying loci and understanding the mechanisms associated with resistance to VNN are important in selective breeding programs. We performed a genome-wide association study (GWAS) using genotyping-by-sequencing (GBS) to study the genomic architecture of resistance to NNV infection in Asian seabass. We genotyped 986 individuals from 43 families produced by 15 founders with 44498 bi-allelic genetic variants using GBS. The GWAS identified three genome-wide significant loci on chromosomes 16, 19, and 20, respectively, and six suggestive loci on chromosomes 1, 8, 14, 15, 21, and 24, respectively, associated with resistance to NNV infection measured as binary and quantitative traits. Using the 500 most significant markers in combination with a training population of 800 samples could reach a genomic prediction accuracy of 0.7. Candidate genes significantly associated with resistance to NNV, including lysine-specific demethylase 2A, beta-defensin 1, and cystatin-B, which play important roles in immune responses against virus infection, were identified. Almost all the candidate genes were differentially expressed in different tissues against NNV infection. The significant genetic variants can be used in genomic selection and help understand the mechanism of resistance to VNN. Future studies should use populations of large effective size and whole genome resequencing to identify more useful genetic variants.

Genome-wide identification of markers for selecting higher oil content in oil palm

BACKGROUND

Oil palm (Elaeis guineensis, Jacq.) is the most important source of edible oil. The improvement of oil yield is currently slow in conventional breeding programs due to long generation intervals. Marker-assisted selection (MAS) has the potential to accelerate genetic improvement. To identify DNA markers associated with oil content traits for MAS, we performed quantitative trait loci (QTL) mapping using genotyping by sequencing (GBS) in a breeding population derived from a cross between Deli Dura and Ghana Pisifera, containing 153 F₁ trees.

RESULTS

We constructed a high-density linkage map containing 1357 SNPs and 123 microsatellites. The 16 linkage groups (LGs) spanned 1527 cM, with an average marker space of 1.03 cM. One significant and three suggestive QTL for oil to bunch (O/B) and oil to dry mesocarp (O/DM) were mapped on LG1, LG8, and LG10 in a F₁ breeding population, respectively. These QTL explained 7.6-13.3% of phenotypic variance. DNA markers associated with oil content in these QTL were identified. Trees with beneficial genotypes at two QTL for O/B showed an average O/B of 30.97%, significantly (P < 0.01) higher than that of trees without any beneficial QTL genotypes (average O/B of 28.24%). QTL combinations showed that the higher the number of QTL with beneficial genotypes, the higher the resulting average O/B in the breeding population.

CONCLUSIONS

A linkage map with 1480 DNA markers was constructed and used to identify QTL for oil content traits. Pyramiding the identified QTL with beneficial genotypes associated with oil content traits using DNA markers has the potential to accelerate genetic improvement for oil yield in the breeding population of oil palm.

Construction of a high-density linkage map and fine mapping of QTLs for growth and gonad related traits in blunt snout bream

High-density genetic maps based on SNPs are essential for fine mapping loci controlling specific traits for fish species. Using restriction-site associated DNA tag sequencing (RAD-Seq) technology, we identified 42,784 SNPs evenly distributed across the Megalobrama amblycephala genome. Based on 2 parents and 187 intra-specific hybridization progenies, a total of 14,648 high-confidence SNPs were assigned to 24 consensus linkage groups (LGs) of maternal and paternal map. The total length of the integrated map was 3,258.38 cM with an average distance of 0.57 cM among 5676 effective loci, thereby representing the first high-density genetic map reported for M. amblycephala. A total of eight positive quantitative trait loci (QTLs) were detected in QTL analysis. Of that, five QTL explained ≥35% of phenotypic variation for growth traits and three QTL explained ≥16% phenotypic variation for gonad related traits. A total of 176 mapped markers had significant hits in the zebrafish genome and almost all of the 24 putative-chromosomes of M. amblycephala were in relatively conserved synteny with chromosomes of zebrafish. Almost all M. amblycephala and zebrafish chromosomes had a 1:1 correspondence except for putative-chromosome 4, which mapped to two chromosomes of zebrafish caused by the difference in chromosome numbers between two species.

A genome-wide SNP-based genetic map and QTL mapping for agronomic traits in Chinese cabbage

The aim of this work was to construct a high-resolution genetic map for the dissection of complex morphological and agronomic traits in Chinese cabbage (Brassica rapa L. syn. B. campestris). Chinese cabbage, an economically important vegetable, is a good model plant for studies on the evolution of morphologic variation. Herein, two high-generation inbred Chinese cabbage lines, 'Huangxiaoza' and 'Bqq094-11', were crossed. Then restriction-site-associated DNA sequencing (RAD-seq) was performed on the parents and 120 F₂ individuals. A genetic map containing 711 bins representing 3985 single nucleotide polymorphism (SNP) markers was constructed. By using WinQTL with composite interval mapping (CIM) and mixed-model based composite interval mapping (MCIM) analysis via QTLNetwork, quantitative trait loci (QTL) linked to 16 genetic traits related to plant size, color and leaf characteristics were mapped to 10 linkage groups. The high density genetic map and QTL identified for morphological and agronomic traits lay the groundwork for functional gene mapping, map-based cloning and marker-assisted selection (MAS) in Chinese cabbage.

Large-scale SNP discovery and construction of a high-density genetic map of Colossoma macropomum through genotyping-by-sequencing

Colossoma macropomum, or tambaqui, is the largest native Characiform species found in the Amazon and Orinoco river basins, yet few resources for genetic studies and the genetic improvement of tambaqui exist. In this study, we identified a large number of single-nucleotide polymorphisms (SNPs) for tambaqui and constructed a high-resolution genetic linkage map from a full-sib family of 124 individuals and their parents using the genotyping by sequencing method. In all, 68,584 SNPs were initially identified using minimum minor allele frequency (MAF) of 5%. Filtering parameters were used to select high-quality markers for linkage analysis. We selected 7,734 SNPs for linkage mapping, resulting in 27 linkage groups with a minimum logarithm of odds (LOD) of 8 and maximum recombination fraction of 0.35. The final genetic map contains 7,192 successfully mapped markers that span a total of 2,811 cM, with an average marker interval of 0.39 cM. Comparative genomic analysis between tambaqui and zebrafish revealed variable levels of genomic conservation across the 27 linkage groups which allowed for functional SNP annotations. The large-scale SNP discovery obtained here, allowed us to build a high-density linkage map in tambaqui, which will be useful to enhance genetic studies that can be applied in breeding programs.