Effect of low-level mechanical vibration on osteogenesis and osseointegration of porous titanium implants in the repair of long bone defects

Bone-nerve crosstalk: a new state for neuralizing bone tissue engineering-A mini review

Neuro bone tissue engineering is a multidisciplinary field that combines both principles of neurobiology and bone tissue engineering to develop innovative strategies for repairing and regenerating injured bone tissues. Despite the fact that regeneration and development are considered two distinct biological processes, yet regeneration can be considered the reactivation of development in later life stages to restore missing tissues. It is noteworthy that the regeneration capabilities are distinct and vary from one organism to another (teleost fishes, hydra, humans), or even in the same organism can vary dependent on the injured tissue itself (Human central nervous system vs. peripheral nervous system). The skeletal tissue is highly innervated, peripheral nervous system plays a role in conveying the signals and connecting the central nervous system with the peripheral organs, moreover it has been shown that they play an important role in tissue regeneration. Their regeneration role is conveyed by the different cells' resident in it and in its endoneurium (fibroblasts, microphages, vasculature associated cells, and Schwann cells) these cells secrete various growth factors (NGF, BDNF, GDNF, NT-3, and bFGF) that contribute to the regenerative phenotype. The peripheral nervous system and central nervous system synchronize together in regulating bone homeostasis and regeneration through neurogenic factors and neural circuits. Receptors of important central nervous system peptides such as Serotonin, Leptin, Semaphorins, and BDNF are expressed in bone tissue playing a role in bone homeostasis, metabolism and regeneration. This review will highlight the crosstalk between peripheral nerves and bone in the developmental stages as well as in regeneration and different neuro-bone tissue engineering strategies for repairing severe bone injuries.

Impact of Frontier Development of Alveolar Bone Grafting on Orthodontic Tooth Movement

Sufficient alveolar bone is a safeguard for achieving desired outcomes in orthodontic treatment. Moving a tooth into an alveolar bony defect may result in a periodontal defect or worse–tooth loss. Therefore, when facing a pathologic situation such as periodontal bone loss, alveolar clefts, long-term tooth loss, trauma, and thin phenotype, bone grafting is often necessary to augment bone for orthodontic treatment purposes. Currently, diverse bone grafts are used in clinical practice, but no single grafting material shows absolutely superior results over the others. All available materials demonstrate pros and cons, most notably donor morbidity and adverse effects on orthodontic treatment. Here, we review newly developed graft materials that are still in the pre-clinical stage, as well as new combinations of existing materials, by highlighting their effects on alveolar bone regeneration and orthodontic tooth movement. In addition, novel manufacturing techniques, such as bioprinting, will be discussed. This mini-review article will provide state-of-the-art information to assist clinicians in selecting grafting material(s) that enhance alveolar bone augmentation while avoiding unfavorable side effects during orthodontic treatment.

A preliminary, observational study using whole-blood RNA sequencing reveals differential expression of inflammatory and bone markers post-implantation of percutaneous osseointegrated prostheses

AIMS

While the benefits of direct skeletal attachment of artificial limbs are well recognized, device failure due to infection and insufficient osseointegration remain obstacles to obtaining consistently successful outcomes. Currently, the potential for device failure is assessed by subjective pain, clinical function scores, radiographic evidence of bone atrophy, and the presence of radiolucent lines at the bone-implant interface, and subjective pain and function scores. Our hypothesis is that measurable biological indices might add another objective means to assess trends toward bone and stomal healing. This longitudinal cohort study was undertaken to identify potential serological biomarkers suggestive of bone remodeling and the presence of stomal tissue inflammation.

METHODS

Ten unilateral transfemoral amputee veterans, who were implanted with a percutaneous osseointegrated (OI) skeletal limb docking system, were recruited to participate in this IRB-approved study. Venous blood samples were obtained from before the Stage 1 Surgery up to 1 year following the Stage 2 Surgery. Whole-blood RNA was extracted, sequenced, mapped, and analyzed. Of the significant differentially expressed (DEGs) genes (p<0.05) identified, four genes of interest (IL12B, IL33, COL2A1, and SOST) were validated using qPCR. Enrichment analysis was performed to identify significant (p<0.01) Gene Ontology (GO) terms.

RESULTS

Most differentially expressed genes were only detected at PoS1 immediately after the first surgery. Of the significant genes identified, IL12B and IL33 were related to inflammation, and COL2A1 and SOST were associated with bone remodeling. These four genes were identified with greater than 20 log fold-change.

CONCLUSION

Whole-blood RNA-seq data from 10 patients who previously underwent percutaneous osseointegrated lower limb implantation revealed four genes of interest that are known to be involved in inflammation or bone remodeling. If verified in future studies, these genes may serve as markers for predicting optimal bone remodeling and stomal tissue healing following OI device implantation.

Identification osteogenic signaling pathways following mechanical stimulation: A systematic review

INTRODUCTION

It has been shown that mechanical forces can induce or promote osteogenic differentiation as well as remodeling of the new created bone tissues. To apply this characteristic in bone tissue engineering, it is important to know which mechanical stimuli through which signaling pathway has a more significant impact on osteogenesis.

METHODS

In this systematic study, an electronic search was conducted using PubMed and Google Scholar databases. This study has been prepared and organized according to the preferred reporting items for systematic reviews and meta-analyses (PRISMA) guidelines. Included studies were first categorized according to the in vivo and in vitro studies.

RESULTS

Six types of mechanical stresses were used in these articles and the most commonly used mechanical force and cell source were tension and bone marrow-derived mesenchymal stem cells (BMMSCs), respectively. These forces were able to trigger twelve signaling pathways in which Wnt pathway was so prominent.

CONCLUSION

1) Although specific signaling pathways are induced through specific mechanical forces, Wnt signaling pathways are predominantly activated by almost all types of force/stimulation, 2) All signaling pathways regulate expression of RUNX2, which is known as a master regulator of osteogenesis, 3) In Tension force, the mode of force administration, i.e, continuous or non-continuous tension is more important than the percentage of elongation.

Does Low-Magnitude High-Frequency Vibration (LMHFV) Worth for Clinical Trial on Dental Implant? A Systematic Review and Meta-Analysis on Animal Studies

Being as a non-pharmacological medical intervention, low-magnitude high-frequency vibration (LMHFV) has shown a positive effect on bone induction and remodeling for various muscle diseases in animal studies, among which dental implants osteointegration were reported to be improved as well. However, whether LMHFV can be clinically used in dental implant is still unknown. In this study, efficacy, parameters and side effects of LMHFV were analyzed via data before 15th July 2020, collecting from MEDLINE/PubMed, Embase, Ovid and Cochrane Library databases. In the screened 1,742 abstracts and 45 articles, 15 animal studies involving 972 implants were included. SYRCLE's tool was performed to assess the possible risk of bias for each study. The GRADE approach was applied to evaluate the quality of evidence. Random effects meta-analysis detected statistically significant in total BIC (P < 0.0001) and BV/TV (P = 0.001) upon loading LMHFV on implants. To conclude, LMHFV played an active role on BIC and BV/TV data according to the GRADE analysis results (medium and low quality of evidence). This might illustrate LMHFV to be a worthy way in improving osseointegration clinically, especially for osteoporosis.

Systematic Review Registration:https://www.crd.york.ac.uk/PROSPERO, identifier: NCT02612389

Influence of Low-Magnitude High-Frequency Vibration on Bone Cells and Bone Regeneration

Bone is a mechanosensitive tissue for which mechanical stimuli are crucial in maintaining its structure and function. Bone cells react to their biomechanical environment by activating molecular signaling pathways, which regulate their proliferation, differentiation, and matrix production. Bone implants influence the mechanical conditions in the adjacent bone tissue. Optimizing their mechanical properties can support bone regeneration. Furthermore, external biomechanical stimulation can be applied to improve implant osseointegration and accelerate bone regeneration. One promising anabolic therapy is vertical whole-body low-magnitude high-frequency vibration (LMHFV). This form of vibration is currently extensively investigated to serve as an easy-to-apply, cost-effective, and efficient treatment for bone disorders and regeneration. This review aims to provide an overview of LMHFV effects on bone cells in vitro and on implant integration and bone fracture healing in vivo. In particular, we review the current knowledge on cellular signaling pathways which are influenced by LMHFV within bone tissue. Most of the in vitro experiments showed that LMHFV is able to enhance mesenchymal stem cell (MSC) and osteoblast proliferation. Furthermore, osteogenic differentiation of MSCs and osteoblasts was shown to be accelerated by LMHFV, whereas osteoclastogenic differentiation was inhibited. Furthermore, LMHFV increased bone regeneration during osteoporotic fracture healing and osseointegration of orthopedic implants. Important mechanosensitive pathways mediating the effects of LMHFV might be the Wnt/beta-catenin signaling pathway, the estrogen receptor (ER) signaling pathway, and cytoskeletal remodeling.

ROS Dependent Wnt/β-Catenin Pathway and Its Regulation on Defined Micro-Pillars-A Combined In Vitro and In Silico Study

The physico-chemical surface design of implants influences the surrounding cells. Osteoblasts on sharp-edged micro-topographies revealed an impaired cell phenotype, function and Ca2+ mobilization. The influence of edges and ridges on the Wnt/β-catenin pathway in combination with the cells' stress response has not been clear. Therefore, MG-63 osteoblasts were studied on defined titanium-coated micro-pillars (5 × 5 × 5 µm) in vitro and in silico. MG-63s on micro-pillars indicated an activated state of the Wnt/β-catenin pathway. The β-catenin protein accumulated in the cytosol and translocated into the nucleus. Gene profiling indicated an antagonism mechanism of the transcriptional activity of β-catenin due to an increased expression of inhibitors like ICAT (inhibitor of β-catenin and transcription factor-4). Cells on pillars produced a significant reactive oxygen species (ROS) amount after 1 and 24 h. In silico analyses provided a detailed view on how transcriptional activity of Wnt signaling is coordinated in response to the oxidative stress induced by the micro-topography. Based on a coordinated expression of regulatory elements of the Wnt/β-catenin pathway, MG-63s are able to cope with an increased accumulation of β-catenin on micro-pillars and suppress an unintended target gene expression. Further, β-catenin may be diverted into other signaling pathways to support defense mechanisms against ROS.

Effects of mechanical vibration on cell morphology, proliferation, apoptosis, and cytokine expression/secretion in osteocyte-like MLO-Y4 cells exposed to high glucose

Diabetic patients exhibit significant bone deterioration. Our recent findings demonstrate that mechanical vibration is capable of resisting diabetic bone loss, whereas the relevant mechanism remains unclear. We herein examined the effects of mechanical vibration on the activities and functions of osteocytes (the most abundant and well-recognized mechanosensitive cells in the bone) exposed to high glucose (HG). The osteocytic MLO-Y4 cells were incubated with 50 mM HG for 24 h, and then stimulated with 1 h/day mechanical vibration (0.5 g, 45 Hz) for 3 days. We found that mechanical vibration significantly increased the proliferation and viability of MLO-Y4 cells under the HG environment via the MTT, BrdU, and Cell Viability Analyzer assays. The apoptosis detection showed that HG-induced apoptosis in MLO-Y4 cells was inhibited by mechanical vibration. Moreover, increased cellular area, microfilament density, and anisotropy in HG-incubated MLO-Y4 cells were observed after mechanical vibration via the F-actin fluorescence staining. The real-time polymerase chain reaction and western blotting results demonstrated that mechanical vibration significantly upregulated the gene and protein expression of Wnt3a, β-catenin, and osteoprotegerin (OPG) and decreased the sclerostin, DKK1, and receptor activator for nuclear factor-κB ligand (RANKL) expression in osteocytes exposed to HG. The enzyme-linked immunosorbent assay assays showed that mechanical vibration promoted the secretion of prostaglandin E₂ and OPG, and inhibited the secretion of tumor necrosis factor-α and RANKL in the supernatant of HG-treated MLO-Y4 cells. Together, this study demonstrates that mechanical vibration improves osteocytic architecture and viability, and regulates cytokine expression and secretion in the HG environment, and implies the potential great contribution of the modulation of osteocytic activities in resisting diabetic osteopenia/osteoporosis by mechanical vibration.

Vibration of osteoblastic cells using a novel motion-control platform does not acutely alter cytosolic calcium, but desensitizes subsequent responses to extracellular ATP

Low-magnitude high-frequency mechanical vibration induces biological responses in many tissues. Like many cell types, osteoblasts respond rapidly to certain forms of mechanostimulation, such as fluid shear, with transient elevation in the concentration of cytosolic free calcium ([Ca²⁺ ]_i ). However, it is not known whether vibration of osteoblastic cells also induces acute elevation in [Ca²⁺ ]_i . To address this question, we built a platform for vibrating live cells that is compatible with microscopy and microspectrofluorometry, enabling us to observe immediate responses of cells to low-magnitude high-frequency vibrations. The horizontal vibration system was mounted on an inverted microscope, and its mechanical performance was evaluated using optical tracking and accelerometry. The platform was driven by a sinusoidal signal at 20-500 Hz, producing peak accelerations from 0.1 to 1 g. Accelerometer-derived displacements matched those observed optically within 10%. We then used this system to investigate the effect of acceleration on [Ca²⁺ ]_i in rodent osteoblastic cells. Cells were loaded with fura-2, and [Ca²⁺ ]_i was monitored using microspectrofluorometry and fluorescence ratio imaging. No acute changes in [Ca²⁺ ]_i or cell morphology were detected in response to vibration over the range of frequencies and accelerations studied. However, vibration did attenuate Ca²⁺ transients generated subsequently by extracellular ATP, which activates P2 purinoceptors and has been implicated in mechanical signaling in bone. In summary, we developed and validated a motion-control system capable of precisely delivering vibrations to live cells during real-time microscopy. Vibration did not elicit acute elevation of [Ca²⁺ ]_i , but did desensitize responses to later stimulation with ATP.

Metallic ion doped tri-calcium phosphate ceramics: Effect of dynamic loading on in vivo bone regeneration

The present study was carried out to evaluate the effect of dynamic loading on bone regeneration performance of different doped β-tri-calcium phosphate ceramics. We have developed porous beta tri-calcium phosphate (β-TCP), 5%zinc doped, 5% magnesium doped and 5% titanium doped β-TCP by aqueous solution combustion technique. All the synthesized β-TCP powders showed pore size of 21-146 μm (pure β-TCP), 16-142 μm (Zn-β-TCP), 28-156 μm (Mg- β-TCP) and 14-173 μm (Ti-β-TCP) while their apparent porosity 17.89%, 28.09%, 26.54% and 25.87% respectively. The pure and doped samples were implanted in femoral bone defect model (rabbit) to assess bone regeneration under dynamic loading. Bone regeneration was assessed after 1 and 2 month post-implantation on the basis of clinical radiological, histological, fluorochrome labelling, micro computed tomography (μ-CT) and scanning electron microscopy (SEM). Radiological and fluorochrome labelling study showed reduced size of 5%Ti-β-TCPimplant vis-à-vis more new bone formation as compared to other groups. Micro-CT of the implanted bone sample showed a significant amount of newly formed bony tissue surrounding the Ti-β-TCP implant as compared to other samples. Similar findings of less interfacial gap between the implant and bone were also observed in SEM study. However, all the doped materials are suitable as bone grafting material and have potential for application in bone tissue engineering.

Evaluation and Prediction of Mass Transport Properties for Porous Implant with Different Unit Cells: A Numerical Study

Efficient exchange of nutrients and wastes required for cell proliferation and differentiation plays a pivotal role in improving the service life of porous implants. In this study, mass transport properties for porous implant with different unit cells were evaluated and predicted when the porosities are kept the same. To this end, three typical unit cells (diamond (DO), rhombic dodecahedron (RD), and octet truss (OT)) were selected, in which DO displayed diagonal-symmetrical shape, while RD and OT share midline-symmetrical structure. Then, single unit cells were designed quantitatively, and its shape parameters were measured and calculated. Moreover, corresponding porous scaffolds with same outline size were created, respectively. Furthermore, using computational fluid dynamics (CFD) methodology, flow performances with Dulbecco's Modified Eagle's Medium (DMEM) in vitro were simulated for three different porous implants, and flow trajectory, velocity, and wall shear stress which could reflect the properties of mass transfer and tissue regeneration were compared and predicted numerically. Results demonstrated that different unit cell could directly lead to different mass transport properties for porous implant, in spite of same porosity, scaffold size, and service environment. Additionally, by the results, DO displayed greater tortuosity, more appropriate areas, and smoother shear stress distribution than RD and OT, which would provide better surroundings for implant fixation and tissue regeneration. However, RD and OT showed better mass transport properties because of bigger maximum velocity (5.177 mm/s, 4.381 mm/s) than DO (3.941 mm/s). This study would provide great helps for unit cell selection and biological performance optimization for 3D printed bone implants.

A 3D Printed Porous Titanium Alloy Rod with Diamond Crystal Lattice for Treatment of the Early-Stage Femoral Head Osteonecrosis in Sheep

Instruments made of porous titanium alloy and fabricated with a 3D printed technique are increasingly used in experimental and clinical research. To date, however, few studies have assessed their use in early-stage osteonecrosis of the femoral head (ONFH). In this study, porous titanium alloy rods (Ti-Rod) with diamond crystal lattice, fabricated using an electron beam melting (EBM) technique, were implanted into sheep models (n=9) of early-stage ONFH for 6 months. Bone ingrowth and integration were investigated and compared with those of sheep (n=9) undergoing core decompression (CD) alone. Following Ti-Rod implantation, femoral heads showed fine osteointegration, with X-ray evaluation showing compact integration between peripheral bone and rods without radiolucent lines encircling the rods, as well as new bone growth along the metal trabeculae without the intervention of fibrous tissue. The regions of interest (ROIs) of femoral heads showed fine bone ingrowth after Ti-Rod implantation than CD alone. By micro-CT evaluation, the ratios of bone volume to total volume (BV/TV) of ROIs in Rod group was 930 % and 452 % higher than CD group after 3 (0.206 ± 0.0095 vs. 0.020 ± 0.0058, p < 0.05, n=3) and 6 (0.232 ± 0.0161 vs. 0.042 ± 0.0061, p < 0.05, n=3) months respectively. By histological evaluation, the BV/TV of ROIs in Rod group was 647 % and 422 % higher than CD group after 3 (0.157 ± 0.0061 vs. 0.021 ± 0.0061, p < 0.05, n=3) and 6 (0.235 ± 0.0145 vs. 0.045 ± 0.0059, p < 0.05, n=3) months respectively. The new bone grew along metal trabeculae into the center of the rod with a rapid bone ingrowth in Rod gorup. Whereas in CD group, new bone grew mainly at the periphery of the decompressive channel with a slow bone ingrowth. Mechanical analysis showed that maximum load on the femoral head-necks was 31 % greater 6 months after Ti-Rod implantation than after CD alone when the vertical press reached the apex (3751.75 ± 391.96 vs. 2858.25 ± 512.91 N, p < 0.05, n=3). The association of rod implantation with fine bone ingrowth, osteointegration, and favorable mechanical properties suggests that implantation of the porous titanium alloy rod with the diamond crystal lattice may be a beneficial intervention for patients with early-stage ONFH.

Enhanced bone healing in porous Ti implanted rabbit combining bioactive modification and mechanical stimulation

To improve the bone healing efficiency of porous titanium implants, desired biological properties of implants are mandatory, involving bioactivity, osteoconductivity, osteoinductivity and a stable environment. In this study, bare porous titanium (abbr. pTi) with the porosity of 70% was fabricated by vacuum diffusion bonding of titanium meshes. Hydroxyapatite-coated pTi (abbr. Hap-pTi) was obtained by successively subjecting pTi to alkali heat treatment, pre-calcification and simulated body fluid. Both pTi and Hap-pTi were respectively implanted into the tibia defect model (ϕ10 mm × 6 mm) in New Zealand white rabbits, then subjected to non-invasively axial compressive loads at high-magnitude low-frequency (HMLF), which were denoted as F-pTi and F-Hap-pTi, respectively. Bone repairing efficiencies were analyzed by postoperative X-ray examination, optical observation and HE staining after 14 and 30 days of implantation. ALP and OCN contents in serum were also examined at 30 days. Results showed that the sham group and sham group with mechanical stimulation (abbr. F-sham) preferably caused bone fractures. Qualitatively, Hap-pTi reduced the risk of bone fractures and enhanced bone healing slightly more effectively compared to bared pTi. However, both Hap-pTi combined with mechanical stimulation and F-pTi in the case of bioactive modification could result in a higher bone healing efficiency (F-Hap-pTi). The molecular signaling investigation of ALP and OCN contents in serum further revealed a probable synergistic effect of Hap coating coupling with HMLF compression on improving bone repairing efficiency. It provides a candidate of clinically applicable therapy for osseous defects.

Pulsed electromagnetic fields preserve bone architecture and mechanical properties and stimulate porous implant osseointegration by promoting bone anabolism in type 1 diabetic rabbits

The effects of exogenous pulsed electromagnetic field (PEMF) stimulation on T1DM-associated osteopathy were investigated in alloxan-treated rabbits. We found that PEMF improved bone architecture, mechanical properties, and porous titanium (pTi) osseointegration by promoting bone anabolism through a canonical Wnt/β-catenin signaling-associated mechanism, and revealed the clinical potential of PEMF stimulation for the treatment of T1DM-associated bone complications.

INTRODUCTION

Type 1 diabetes mellitus (T1DM) is associated with deteriorated bone architecture and impaired osseous healing potential; nonetheless, effective methods for resisting T1DM-associated osteopenia/osteoporosis and promoting bone defect/fracture healing are still lacking. PEMF, as a safe and noninvasive method, have proven to be effective for promoting osteogenesis, whereas the potential effects of PEMF on T1DM osteopathy remain poorly understood.

METHODS

We herein investigated the effects of PEMF stimulation on bone architecture, mechanical properties, bone turnover, and its potential molecular mechanisms in alloxan-treated diabetic rabbits. We also developed novel nontoxic Ti2448 pTi implants with closer elastic modulus with natural bone and investigated the impacts of PEMF on pTi osseointegration for T1DM bone-defect repair.

RESULTS

The deteriorations of cancellous and cortical bone architecture and tissue-level mechanical strength were attenuated by 8-week PEMF stimulation. PEMF also promoted osseointegration and stimulated more adequate bone ingrowths into the pore spaces of pTi in T1DM long-bone defects. Moreover, T1DM-associated reduction of bone formation was significantly attenuated by PEMF, whereas PEMF exerted no impacts on bone resorption. We also found PEMF-induced activation of osteoblastogenesis-related Wnt/β-catenin signaling in T1DM skeletons, but PEMF did not alter osteoclastogenesis-associated RANKL/RANK signaling gene expression.

CONCLUSION

We reveal that PEMF improved bone architecture, mechanical properties, and pTi osseointegration by promoting bone anabolism through a canonical Wnt/β-catenin signaling-associated mechanism. This study enriches our basic knowledge for understanding skeletal sensitivity in response to external electromagnetic signals, and also opens new treatment alternatives for T1DM-associated osteopenia/osteoporosis and osseous defects in an easy and highly efficient manner.

Low-1 level mechanical vibration improves bone microstructure, tissue mechanical properties and porous titanium implant osseointegration by promoting anabolic response in type 1 diabetic rabbits

Type 1 diabetes mellitus (T1DM) is associated with reduced bone mass, increased fracture risk, and impaired bone defect regeneration potential. These skeletal complications are becoming important clinical challenges due to the rapidly increasing T1DM population, which necessitates developing effective treatment for T1DM-associated osteopenia/osteoporosis and bone trauma. This study aims to investigate the effects of whole-body vibration (WBV), an easy and non-invasive biophysical method, on bone microstructure, tissue-level mechanical properties and porous titanium (pTi) osseointegration in alloxan-diabetic rabbits. Six non-diabetic and twelve alloxan-treated diabetic rabbits were equally assigned to the Control, DM, and DM with WBV stimulation (WBV) groups. A cylindrical drill-hole defect was established on the left femoral lateral condyle of all rabbits and filled with a novel non-toxic Ti2448 pTi. Rabbits in the WBV group were exposed to 1h/day WBV (0.3g, 30Hz) for 8weeks. After sacrifice, the left femoral condyles were harvested for histological, histomorphometric and nanoindentation analyses. The femoral sample with 2-cm height above the defect was used for qRT-PCR analysis. The right distal femora were scanned with μCT. We found that all alloxan-treated rabbits exhibited hyperglycemia throughout the experimental period. WBV inhibited the deterioration of cancellous and cortical bone architecture and tissue-level mechanical properties via μCT, histological and nanoindentation examinations. T1DM-induced reduction of bone formation was inhibited by WBV, as evidenced by elevated serum OCN and increased mineral apposition rate (MAR), whereas no alteration was observed in bone resorption marker TRACP5b. WBV also stimulated more adequate ingrowths of mineralized bone tissue into pTi pore spaces, and improved peri-implant bone tissue-level mechanical properties and MAR in T1DM bone defects. WBV mitigated the reductions in femoral BMP2, OCN, Wnt3a, Lrp6, and β-catenin and inhibited Sost mRNA expression but did not alter RANKL or RANK gene expression in T1DM rabbits. Our findings demonstrated that WBV improved bone architecture, tissue-level mechanical properties, and pTi osseointegration by promoting canonical Wnt signaling-mediated skeletal anabolic response. This study not only advances our understanding of T1DM skeletal sensitivity in response to external mechanical cues but also offers new treatment alternatives for T1DM-associated osteopenia/osteoporosis and osseous defects in an economic and highly efficient manner.

The Microdamage and Expression of Sclerostin in Peri-implant Bone under One-time Shock Force Generated by Impact

Osseointegration is the key to implant stability and occlusal support. Biomechanical response and remodeling of peri-implant bone occurs under impact loading. Sclerostin participates in bone formation and resorption through Wnt and RANKL pathways. However the mechanism of microdamage and expression of sclerostin in peri-implant bone under impact load is still unclear. In present study, specific impact forces were applied to the implants with favorable osseointegration in rabbits. The microdamage of peri-implant bone and the expression of sclerostin, β-catenin and RANKL during the process of bone damage and remodeling were investigated by micro-CT, histology, immunofluorescence and RT-qPCR analysis. Interface separation and trabecular fracture were found histologically, which were consistent with micro-CT analyses. Throughout remodeling, bone resorption was observed during the first 14 days after impact, and osseointegration and normal trabecular structure were found by 28 d. The expression of sclerostin and RANKL increased after impact and reached a maximum by 14 d, then decreased gradually to normal levels by 28 d. And β-catenin expression was opposite. Results indicated that sclerostin may involve in the peri-implant bone damage caused by impact and remodeling through Wnt/β-catenin and RANKL/RANK pathways. It will provide a new insight in the diagnosis and treatment for patients suffering impact.

Safety, osseointegration, and bone ingrowth analysis of PMMA-based porous cement on animal metaphyseal bone defect model

Bone defects created after curettage of benign bone tumors are customarily filled with solid poly(methyl methacrylate) (PMMA) or other bone substitutes. In this study, we depicted a porous PMMA-based cement (produced by mixing sodium bicarbonate and citric acid) and evaluated the prospect of its clinic application. Cement samples were characterized by high-performance liquid chromatography (HPLC) coupled to mass spectrometry and its cytotoxicity evaluated in fibroblast cultures. Implantation in rabbits allowed the histologic analysis of bone, kidneys, and liver for toxicity and coagulation tests, and MRI images for hemostasis evaluation. Osseointegration was analyzed through radiography, microtomography (micro-CT), SEM, and histology of sheep specimens. Rabbit specimens were analyzed 1, 4, and 7 days after implantation of porous or solid bone cement in 6.0 mm femoral defects. Sheep specimens were analyzed 3 and 6 months after implantation or not of porous or solid cement in 15.0 mm subchondral tibial defects. The production process did not release any detectable toxic substance but slightly reduced fibroblast proliferation in vitro. Until 7 days after surgery, no local or systemic alterations could be detected in histology, or hematoma formation in histology or MRI. Sheep implants showed 6 mm linear ingrowth from the bone-cement interface and 20% bone ingrowth considering the whole defect area. Radiography, micro-CT, SEM, and histology confirmed these findings. We conclude that our porous PMMA-based cement is an attractive alternative treatment for bone defect filling that combines osseointegration and early weight bearing. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 649-658, 2018.

Metallic powder-bed based 3D printing of cellular scaffolds for orthopaedic implants: A state-of-the-art review on manufacturing, topological design, mechanical properties and biocompatibility

Metallic cellular scaffold is one of the best choices for orthopaedic implants as a replacement of human body parts, which could improve life quality and increase longevity for the people needed. Unlike conventional methods of making cellular scaffolds, three-dimensional (3D) printing or additive manufacturing opens up new possibilities to fabricate those customisable intricate designs with highly interconnected pores. In the past decade, metallic powder-bed based 3D printing methods emerged and the techniques are becoming increasingly mature recently, where selective laser melting (SLM) and selective electron beam melting (SEBM) are the two representatives. Due to the advantages of good dimensional accuracy, high build resolution, clean build environment, saving materials, high customisability, etc., SLM and SEBM show huge potential in direct customisable manufacturing of metallic cellular scaffolds for orthopaedic implants. Ti-6Al-4V to date is still considered to be the optimal materials for producing orthopaedic implants due to its best combination of biocompatibility, corrosion resistance and mechanical properties. This paper presents a state-of-the-art overview mainly on manufacturing, topological design, mechanical properties and biocompatibility of cellular Ti-6Al-4V scaffolds via SLM and SEBM methods. Current manufacturing limitations, topological shortcomings, uncertainty of biocompatible test were sufficiently discussed herein. Future perspectives and recommendations were given at the end.

Novel Bio-functional Magnesium Coating on Porous Ti6Al4V Orthopaedic Implants: In vitro and In vivo Study

Titanium and its alloys with various porous structures are one of the most important metals used in orthopaedic implants due to favourable properties as replacement for hard tissues. However, surface modification is critical to improve the osteointegration of titanium and its alloys. In this study, a bioactive magnesium coating was successfully fabricated on porous Ti6Al4V by means of arc ion plating, which was proved with fine grain size and high film/substrate adhesion. The surface composition and morphology were characterized by X-ray diffraction and SEM equipped with energy dispersive spectroscopy. Furthermore, the in vitro study of cytotoxicity and proliferation of MC3T3-E1 cells showed that magnesium coated porous Ti6Al4V had suitable degradation and biocompatibility. Moreover, the in vivo studies including fluorescent labelling, micro-computed tomography analysis scan and Van-Gieson staining of histological sections indicated that magnesium coated porous Ti6Al4V could significantly promote bone regeneration in rabbit femoral condylar defects after implantation for 4 and 8 weeks, and has better osteogenesis and osteointegration than the bare porous Ti6Al4V. Therefore, it is expected that this bioactive magnesium coating on porous Ti6Al4V scaffolds with improved osteointegration and osteogenesis functions can be used for orthopedic applications.

Vibratory stimulation enhances thyroid epithelial cell function

The tissues of the body are routinely subjected to various forms of mechanical vibration, the frequency, amplitude, and duration of which can contribute both positively and negatively to human health. The vocal cords, which are in close proximity to the thyroid, may also supply the thyroid with important mechanical signals that modulate hormone production via mechanical vibrations from phonation. In order to explore the possibility that vibrational stimulation from vocalization can enhance thyroid epithelial cell function, FRTL-5 rat thyroid cells were subjected to either chemical stimulation with thyroid stimulating hormone (TSH), mechanical stimulation with physiological vibrations, or a combination of the two, all in a well-characterized, torsional rheometer-bioreactor. The FRTL-5 cells responded to mechanical stimulation with significantly (p<0.05) increased metabolic activity, significantly (p<0.05) increased ROS production, and increased gene expression of thyroglobulin and sodium-iodide symporter compared to un-stimulated controls, and showed an equivalent or greater response than TSH only stimulated cells. Furthermore, the combination of TSH and oscillatory motion produced a greater response than mechanical or chemical stimulation alone. Taken together, these results suggest that mechanical vibrations could provide stimulatory cues that help maintain thyroid function.

•

Thyroid epithelial cells responded to mechanical vibrations similar to those from vocalization.

•

This response was equivalent or greater compared to chemical stimulation.

•

The combination of mechanical and chemical stimulation was synergistic.

•

It may be possible to influence thyroid function with mechanical vibrations.