Multifunctional Fe3O4 @ Au core/shell nanostars: a unique platform for multimode imaging and photothermal therapy of tumors

Comparative Study of Catalytic Activity of Recyclable Au/Fe3O4 Microparticles for Reduction Of 2,4-Dinitrophenol and Anionic, Cationic Azo Dyes

We synthesized Au/Fe3O4 microparticles. Initially, citrate-capped Fe3O4 micro-sized particles were synthesized by the co-precipitation method with an excess amount of trisodium citrate. Gold ions were reduced on the surface of citrate-capped Fe3O4 and grew as gold sub-microparticles with an average diameter of 210 nm on the surface. The characteristic SPR peak of gold nanoparticles on the surface of Fe3O4 was detected at 584 nm, whereas the absorption in the near-infrared region was increased. SEM images has proved that the synthesized Au/Fe3O4 composite microparticles has an average diameter of 1.7 micrometers. The results of XRD patterns proved the existence of both crystal phases of Fe3O4 and Au particles. To investigate the catalytic activity, the reaction rate constant of reduction of 2,4-dinitrophenol (2,4-DNP) and degradation of Congo red (CR), and methylene blue (MB) with NaBH4 in the presence of Au/Fe3O4 catalyst was monitored by UV-Vis spectroscopy. The initial reaction rate constant calculated from the change in characteristic peak absorptions of 2,4-dinitrophenol was 3.97×10-3 s-1, while the reaction rate constants for the degradation of CR and MB were 9.72×10-3 s-1 and 14.25×10-3 s-1 respectively. After 5 cycles, Au/Fe3O4 microparticles preserved 99 % of the reaction rate constant, exhibiting considerable recycling efficiency in the reduction of nitro groups.

Ultrasound-mediated delivery of Pik3cb shRNA using magnetic nanoparticles for the treatment of in-stent restenosis in a rat balloon-injured model

The aim of the present work was to examine the effect of polyethylene glycol (PEG)-coated superparamagnetic iron oxide (SPIO) nanoparticles carrying Pik3cb short hairpin RNA (shRNA) in the prevention of restenosis with the aid of ultrasound and a magnetic field. SPIO is a type of contrast agent used in medical imaging to enhance the visibility of specific tissues or organs. It consists of tiny iron oxide nanoparticles that can be targeted to specific areas of interest in the body. PEG-coated SPIO nanoparticles carrying Pik3cb shRNA (SPIO-shPik3cb) were prepared, and the particle size and zeta potential of PEG-coated SPIO nanoparticles with and without Pik3cb shRNA were examined. After a right common artery balloon-injured rat model was established, the rats were randomly divided into four groups, and the injured arteries were transfected with SPIO-shPik3cb, saline, SPIO-shcontrol and naked shRNA Pik3cb. During the treatment, each group was placed under a magnetic field and was transfected with the aid of ultrasound. Rats were sacrificed, and the tissue was harvested for analysis after 14 days. The results suggested that the mean particle size and zeta potential of SPIO-shPik3cbs were 151.45 ± 11 nm and 10 mV, respectively. SPIO-shPik3cb showed higher transfection efficiency and significantly inhibited the intimal thickening compared with naked Pik3cb shRNA in vascular smooth muscle cells (VSMCs) (*P < 0.05). Moreover, SPIO-shPik3cb could also significantly downregulate the expression of pAkt protein compared with naked Pik3cb shRNA. According to the results, SPIO-shPik3cb can remarkably inhibit the intimal thickening under a combination of magnetic field exposure and ultrasound.

Highly stable and fast-dissolving ascorbic acid-loaded microneedles

OBJECTIVES

Ascorbic acid has many benefits to the skin. Numerous attempts to promote its topical delivery show great challenges since its chemical instability and poor skin impermeability. Microneedle delivery is a simple, safe, painless and effective means to deliver therapeutic or nourishing molecules into the skin. The purpose of this study was twofold: (a) to develop a new formulation of ascorbic acid-loaded microneedles to enhance ascorbic acid stability by investigating an optimal amount of polyethyleneimine as an additive to the dextran-based microneedle formulation and (b) to assess microneedle properties in terms of dissolving rate, skin penetration ability, biocompatibility and antimicrobial activity.

METHODS

The microneedles formulated with ascorbic acid and varied polyethyleneimine concentrations were fabricated and subsequently tested for ascorbic acid stability using 2,2-diphenyl-1-picrylhydrazyl assay. The dissolution rate and skin penetration depth were investigated in porcine skin and the reconstructed human full-thickness skin model respectively. The skin irritation tests were done according to the Organisation for Economic Co-operation and Development Test Guideline No. 439. An antimicrobial disc susceptibility test was performed against Escherichia coli, Staphylococcus aureus and Staphylococcus epidermidis.

RESULTS

Among varied amounts of 0%, 1.5%, 3.0% and 4.5% (w/v), the 3.0% polyethyleneimine showed the most desirable characteristics, including well-preserved shape integrity after demoulding, significantly improved stability of ascorbic acid (p < 0.001) from 33% to 96% antioxidant activity after 8 weeks of storage at 40°C, increased dissolving rate (p < 0.001) by being completely dissolved within 2 min after the skin insertion, passing skin penetration and biocompatibility tests as well as having a broad spectrum of antimicrobial property.

CONCLUSION

With a safety profile and enhanced properties, the new formulation of ascorbic acid-loaded microneedles shows outstanding potential as commercially available cosmetics and healthcare products.

Self-template synthesis of mesoporous and biodegradable Fe3O4 nanospheres as multifunctional nanoplatform for cancer therapy

Superparamagnetic Fe3O4 nanospheres have demonstrated great potential as important components in nanomedicine for cancer imaging and therapy. One of the major obstacles that impedes their application is the slow degradation of ingested Fe3O4 nanospheres, which potentially causes long-term health risks. To tackle this issue, we proposed to fabricate Fe3O4 nanospheres with mesoporous structure via a simple self-template etching method. The mesoporous Fe3O4 nanospheres not only offered large specific surface area and weak-acidic responsive degradability, but also exhibited T2-weighted magnetic resonance contrast enhancement and magnetic targeting, which made them possible to serve as excellent cancer therapeutic nanoplatform. Both inorganic photothermal therapeutic Au nanoparticles and organic chemotherapeutic doxorubicin hydrochloride were demonstrated to be successfully loaded onto such kind of nanoplatform, and the hybrid nanomedicine demonstrated synergistic photothermal and chemotherapeutic activity for tumor elimination under near infrared irradiation and improved biodegradability in weak acidic tumor microenvironment. We believe that this study paved a simple way for designing multifunctional Fe3O4-based biodegradable nanomedicine.

3D modeling of in vivo MRI-guided nano-photothermal therapy mediated by magneto-plasmonic nanohybrids

BACKGROUND

Nano-photothermal therapy (NPTT) has gained wide attention in cancer treatment due to its high efficiency and selective treatment strategy. The biggest challenges in the clinical application are the lack of (i) a reliable platform for mapping the thermal dose and (ii) efficient photothermal agents (PTAs). This study developed a 3D treatment planning for NPTT to reduce the uncertainty of treatment procedures, based on our synthesized nanohybrid.

METHODS

This study aimed to develop a three-dimensional finite element method (FEM) model for in vivo NPTT in mice using magneto-plasmonic nanohybrids, which are complex assemblies of superparamagnetic iron oxide nanoparticles and gold nanorods. The model was based on Pennes' bio-heat equation and utilized a geometrically correct mice whole-body. CT26 colon tumor-bearing BALB/c mice were injected with nanohybrids and imaged using MRI (3 Tesla) before and after injection. MR images were segmented, and STereoLithography (STL) files of mice bodies and nanohybrid distribution in the tumor were established to create a realistic geometry for the model. The accuracy of the temperature predictions was validated by using an infrared (IR) camera.

RESULTS

The photothermal conversion efficiency of the nanohybrids was experimentally determined to be approximately 30%. The intratumoral (IT) injection group showed the highest temperature increase, with a maximum of 17 °C observed at the hottest point on the surface of the tumor-bearing mice for 300 s of laser exposure at a power density of 1.4 W/cm². Furthermore, the highest level of tissue damage, with a maximum value of Ω = 0.4, was observed in the IT injection group, as determined through a simulation study.

CONCLUSIONS

Our synthesized nanohybrid shows potential as an effective agent for MRI-guided NPTT. The developed model accurately predicted temperature distributions and tissue damage in the tumor. However, the current temperature validation method, which relies on limited 2D measurements, may be too lenient. Further refinement is necessary to improve validation. Nevertheless, the presented FEM model holds great promise for clinical NPTT treatment planning.

Immunotoxicity of metal and metal oxide nanoparticles: from toxic mechanisms to metabolism and outcomes

The influence of metal and metal oxide nanomaterials on various fields since their discovery has been remarkable. They have unique properties, and therefore, have been employed in specific applications, including biomedicine. However, their potential health risks cannot be ignored. Several studies have shown that exposure to metal and metal oxide nanoparticles can lead to immunotoxicity. Different types of metals and metal oxide nanoparticles may have a negative impact on the immune system through various mechanisms, such as inflammation, oxidative stress, autophagy, and apoptosis. As an essential factor in determining the function and fate of immune cells, immunometabolism may also be an essential target for these nanoparticles to exert immunotoxic effects in vivo. In addition, the biodegradation and metabolic outcomes of metal and metal oxide nanoparticles are also important considerations in assessing their immunotoxic effects. Herein, we focus on the cellular mechanism of the immunotoxic effects and toxic effects of different types of metal and metal oxide nanoparticles, as well as the metabolism and outcomes of these nanoparticles in vivo. Also, we discuss the relationship between the possible regulatory effect of nanoparticles on immunometabolism and their immunotoxic effects. Finally, we present perspectives on the future research and development direction of metal and metal oxide nanomaterials to promote scientific research on the health risks of nanomaterials and reduce their adverse effects on human health.

Gold-iron oxide (Au/Fe3O4) magnetic nanoparticles as the nanoplatform for binding of bioactive molecules through self-assembly

Nanomedicine plays a crucial role in the development of next-generation therapies. The use of nanoparticles as drug delivery platforms has become a major area of research in nanotechnology. To be effective, these nanoparticles must interact with desired drug molecules and release them at targeted sites. The design of these “nanoplatforms” typically includes a functional core, an organic coating with functional groups for drug binding, and the drugs or bioactive molecules themselves. However, by exploiting the coordination chemistry between organic molecules and transition metal centers, the self-assembly of drugs onto the nanoplatform surfaces can bypass the need for an organic coating, simplifying the materials synthesis process. In this perspective, we use gold-iron oxide nanoplatforms as examples and outline the prospects and challenges of using self-assembly to prepare drug-nanoparticle constructs. Through a case study on the binding of insulin on Au-dotted Fe3O4 nanoparticles, we demonstrate how a self-assembly system can be developed. This method can also be adapted to other combinations of transition metals, with the potential for scaling up. Furthermore, the self-assembly method can also be considered as a greener alternative to traditional methods, reducing the use of chemicals and solvents. In light of the current climate of environmental awareness, this shift towards sustainability in the pharmaceutical industry would be welcomed.

Light-Induced Clusterization of Gold Nanoparticles: A New Photo-Triggered Antibacterial against E. coli Proliferation

Metallic nanoparticles show plasmon resonance phenomena when irradiated with electromagnetic radiation of a suitable wavelength, whose value depends on their composition, size, and shape. The damping of the surface electron oscillation causes a release of heat, which causes a large increase in local temperature. Furthermore, this increase is enhanced when nanoparticle aggregation phenomena occur. Local temperature increase is extensively exploited in photothermal therapy, where light is used to induce cellular damage. To activate the plasmon in the visible range, we synthesized 50 nm diameter spherical gold nanoparticles (AuNP) coated with polyethylene glycol and administered them to an E. coli culture. The experiments were carried out, at different gold nanoparticle concentrations, in the dark and under irradiation. In both cases, the nanoparticles penetrated the bacterial wall, but a different toxic effect was observed; while in the dark we observed an inhibition of bacterial growth of 46%, at the same concentration, under irradiation, we observed a bactericidal effect (99% growth inhibition). Photothermal measurements and SEM observations allowed us to conclude that the extraordinary effect is due to the formation, at low concentrations, of a light-induced cluster of gold nanoparticles, which does not form in the absence of bacteria, leading us to the conclusion that the bacterium wall catalyzes the formation of these clusters which are ultimately responsible for the significant increase in the measured temperature and cause of the bactericidal effect. This photothermal effect is achieved by low-power irradiation and only in the presence of the pathogen: in its absence, the lack of gold nanoparticles clustering does not lead to any phototoxic effect. Therefore, it may represent a proof of concept of an innovative nanoscale pathogen responsive system against bacterial infections.

Effect of the Amount of Carbon in the Fe3O4@ZnO-C Nanocomposites on Its Structure and Magnetic Properties

Synthesis and characterization of structure magnetic properties of Fe3O4@ZnO- C nanocomposite have been done through the precipitation method. This study aimed to discover the effect of concentrations/thickness of carbon layer on crystal structure and magnetic properties of Fe3O4@ZnO-C nanocomposites. Fe3O4 and Fe3O4@ZnO were the samples used in the study, and variations in the amount of carbon were 0.2, 0.1, and 0.05 g. Nanocomposites were characterized using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and vibrating sample magnetometer (VSM). Based on the results of XRD, it has been found that the crystal structure for Fe3O4 was cubic, while ZnO was hexagonal wurtzite. The addition of carbons to Fe3O4@ZnO caused a broadening of the diffraction peaks and a decrease in the degree of crystallinity. The bonds formed on Fe3O4@ZnO-C nanocomposites, i.e. Fe-O bonds indicated the formation of Fe3O4, Zn-O bonds showed the formation of ZnO and C-O, C-H, and O-H bonds revealed the presence of a carbon layer originated from glucose. The VSM results showed that the magnetic saturation decreased with increasing carbon mass. Overall, the carbon-coated nanocomposite material with a carbon mass variation of 0.2, 0.1, and 0.05 g showed superparamagnetic properties with a magnetic saturation of 18.23 emu/g, 19.33 emu/g and 22.05 emu/g, while for the coercive field of 92.29 Oe, 92.90 Oe and 89.60 Oe, respectively. Based on these characterization results, Fe3O4@ZnO-C nanocomposite materials can potentially be developed as biomedical materials, such as the materials for photothermal therapy for cancer cells.

Polyethyleneimine-Based Drug Delivery Systems for Cancer Theranostics

With the development of nanotechnology, various types of polymer-based drug delivery systems have been designed for biomedical applications. Polymer-based drug delivery systems with desirable biocompatibility can be efficiently delivered to tumor sites with passive or targeted effects and combined with other therapeutic and imaging agents for cancer theranostics. As an effective vehicle for drug and gene delivery, polyethyleneimine (PEI) has been extensively studied due to its rich surface amines and excellent water solubility. In this work, we summarize the surface modifications of PEI to enhance biocompatibility and functionalization. Additionally, the synthesis of PEI-based nanoparticles is discussed. We further review the applications of PEI-based drug delivery systems in cancer treatment, cancer imaging, and cancer theranostics. Finally, we thoroughly consider the outlook and challenges relating to PEI-based drug delivery systems.

Engineering Gold Shelled Nanomagnets for Pre-Setting the Operating Temperature for Magnetic Hyperthermia

This study investigated the fabrication of spherical gold shelled maghemite nanoparticles for use in magnetic hyperthermia (MHT) assays. A maghemite core (14 ± 3 nm) was used to fabricate two samples with different gold thicknesses, which presented gold (g)/maghemite (m) content ratios of 0.0376 and 0.0752. The samples were tested in MHT assays (temperature versus time) with varying frequencies (100-650 kHz) and field amplitudes (9-25 mT). The asymptotic temperatures (T∞) of the aqueous suspensions (40 mg Fe/mL) were found to be in the range of 59-77 °C (naked maghemite), 44-58 °C (g/m=0.0376) and 33-51 °C (g/m=0.0752). The MHT data revealed that T∞ could be successful controlled using the gold thickness and cover the range for cell apoptosis, thereby providing a new strategy for the safe use of MHT in practice. The highest SAR (specific absorption rate) value was achieved (75 kW/kg) using the thinner gold shell layer (334 kHz, 17 mT) and was roughly twenty times bigger than the best SAR value that has been reported for similar structures. Moreover, the time that was required to achieve T∞ could be modeled by changing the thermal conductivity of the shell layer and/or the shape/size of the structure. The MHT assays were pioneeringly modeled using a derived equation that was analytically identical to the Box-Lucas method (which was reported as phenomenological).

Growing Gold Nanostars on SiO2 Nanoparticles: Easily Accessible, NIR Active Core–Shell Nanostructures from PVP/DMF Reduction

A new synthesis strategy towards gold-coated silica nanoparticles is presented. The method provides an efficient, reliable and facile-coating process of well-defined star-shaped shell structures, characterized by UV-Vis, TEM, PXRD, DLS and zeta-potential measurements. A marked red shift of the Au-based plasmonic band to the region of the first biological window is observed offering great potential for future research of biological applications.

Advances and Potentials of Polydopamine Nanosystem in Photothermal-Based Antibacterial Infection Therapies

Bacterial infection remains one of the most dangerous threats to human health due to the increasing cases of bacterial resistance, which is caused by the extensive use of current antibiotics. Photothermal therapy (PTT) is similar to photodynamic therapy (PDT), but PTT can generate heat energy under the excitation of light of specific wavelength, resulting in overheating and damage to target cells or sites. Polydopamine (PDA) has been proved to show plenty of advantages, such as simple preparation, good photothermal conversion effects, high biocompatibility, and easy functionalization and adhesion. Taking these advantages, dopamine is widely used to synthesize the PDA nanosystem with excellent photothermal effects, good biocompatibility, and high drug loading ability, which therefore play more and more important roles for anticancer and antibacterial treatment. PDA nanosystem-mediated PTT has been reported to induce significant tumor inhibition, as well as bacterial killings due to PTT-induced hyperthermia. Moreover, combined with other cancer or bacterial inhibition strategies, PDA nanosystem-mediated PTT can achieve more effective tumor and bacterial inhibitions. In this review, we summarized the progress of preparation methods for the PDA nanosystem, followed by advances of their biological functions and mechanisms for PTT uses, especially in the field of antibacterial treatments. We also provided advances on how to combine PDA nanosystem-mediated PTT with other antibacterial methods for synergistic bacterial killings. Moreover, we further provide some prospects of PDA nanosystem-mediated PTT against intracellular bacteria, which might be helpful to facilitate their future research progress for antibacterial therapy.

Alginate-enabled green synthesis of S/Ag1.93S nanoparticles, their photothermal property and in-vitro assessment of their anti-skin-cancer effects augmented by a NIR laser

We report herein the design and synthesis of colloidally-stable S/Ag_1.93S nanoparticles, their photothermal conversion properties and in vitro cytotoxicity toward A431 skin cancer cells under the excitation of a minimally-invasive 980 nm near-infrared (NIR) laser. Micron-sized S particles were first synthesized via acidifying Na₂S₂O₃ using biocompatible sodium alginate as a surfactant. In the presence of AgNO₃ and under rapid microwave-induced heating, alginate reduced AgNO₃ to nascent Ag which reacted with molten S in situ to S/Ag_1.93S nanoparticles. The nanoparticles were characterized using a combination of X-ray diffraction, electron microscopies, elemental analysis, zeta-potential analysis and UV-VIS-NIR spectroscopy. The average particles size was controlled between 40 and 60 nm by fixing the mole ratio of Ag⁺:S₂O₃^2-. When excited by a 980 nm laser, S/Ag_1.93S nanoparticles (~40 nm) produced with the least amount of AgNO₃ exhibited a respectable photothermal conversion efficiency of circa 62% with the test aqueous solution heated to a hyperthermia-inducing 52 °C in 15 min. At 0.7 W/cm², the viability of A431 skin cancer cells incubated with 7.0 ± 0.2 μg/mL of S/Ag_1.93S nanoparticles reduced to 14 ± 0.6%, while an A431 cell control maintained an 80% cell viability. These results suggested that S/Ag_1.93S nanoparticles may have good potential in reducing metastatic skin carcinoma.

Controlled Assembly of Plasmonic Nanoparticles: From Static to Dynamic Nanostructures

The spatial arrangement of plasmonic nanoparticles can dramatically affect their interaction with electromagnetic waves, which offers an effective approach to systematically control their optical properties and manifest new phenomena. To this end, significant efforts were made to develop methodologies by which the assembly structure of metal nanoparticles can be controlled with high precision. Herein, recent advances in bottom-up chemical strategies toward the well-controlled assembly of plasmonic nanoparticles, including multicomponent and multifunctional systems are reviewed. Further, it is discussed how the progress in this area has paved the way toward the construction of smart dynamic nanostructures capable of on-demand, reversible structural changes that alter their properties in a predictable and reproducible manner. Finally, this review provides insight into the challenges, future directions, and perspectives in the field of controlled plasmonic assemblies.

Dendrimer-modified gold nanorods as a platform for combinational gene therapy and photothermal therapy of tumors

Background

The exploitation of novel nanomaterials combining diagnostic and therapeutic functionalities within one single nanoplatform is challenging for tumor theranostics.

Methods

We synthesized dendrimer-modified gold nanorods for combinational gene therapy and photothermal therapy (PTT) of colon cancer. Poly(amidoamine) dendrimers (PAMAM, G3) grafted gold nanorods were modified with GX1 peptide (a cyclic 7-mer peptide, CGNSNPKSC). The obtained Au NR@PAMAM-GX1 are proposed as a gene delivery vector to gene (FAM172A, regulates the proliferation and apoptosis of colon cancer cells) for the combination of photothermal therapy (PTT) and gene therapy of Colon cancer cells (HCT-8 cells). In addition, the CT imaging function of Au NR can provide imaging evidence for the diagnosis of colon cancer.

Results

The results display that Au NR@PAMAM-GX1 can specifically deliver FAM172A to cancer cells with excellent transfection efficiency. The HCT-8 cells treated with the Au NR@PAMAM-GX1/FAM172A under laser irradiation have a viability of 20.45%, which is much lower than the survival rate of other single-mode PTT treatment or single-mode gene therapy. Furthermore, animal experiment results confirm that Au NR@PAMAM-GX1/FAM172A complexes can achieve tumor thermal imaging, targeted CT imaging, PTT and gene therapy after tail vein injection.

Conclusion

Our findings demonstrate that the synthesized Au NR@PAMAM-GX1 offer a facile platform to exert antitumor and improve the diagnostic level of tumor.

Supplementary Information

The online version contains supplementary material available at 10.1186/s13046-021-02105-3.

Safe and efficient 2D molybdenum disulfide platform for cooperative imaging-guided photothermal-selective chemotherapy: A preclinical study

•

Safe and efficient platform of TOS married MoS₂ is synthesized by judicious designed for multimode theranostics of ovarian carcinoma.

•

A photothermal conversion efficiency of 65.3% of the platform is higher than that of other materials reported elsewhere.

•

Highly efficient photothermal ablation under safe irradiation and significantly improved selective chemotherapy for tumor.

•

Synergistic therapy, suppressed recurrence, and negligible side effects enable the prominent survival rate of 100% over 91 days for the tumor-bearing mice.

•

A promising candidate for precise nanomedicines in clinical translation.

Introduction

The striking imbalance between the ever-increasing amount of nanomedicines and low clinical translation of products has become the focus of intense debate. For clinical translation, the critical issue is to select the appropriate agents and combination regimen for targeted diseases, not to prepare increasingly complex nanoplatforms.

Objectives

A safe and efficient platform, α-tocopheryl succinate (α-TOS) married 2D molybdenum disulfide, was devised by a facile method and applied for cooperative imaging-guided photothermal-selective chemotherapy of ovarian carcinoma.

Methods

A novel platform of PEGylated α-TOS and folic acid (FA) conjugated 2D MoS₂ nanoflakes was fabricated  for the cooperative multimode computed tomography (CT)/photoacoustic (PA)/thermal imaging-guided photothermal-selective chemotherapy of ovarian carcinoma.

Results

The photothermal efficiency (65.3%) of the platform under safe near-infrared irradiation is much higher than that of other photothermal materials reported elsewhere. Moreover, the covalently linked α-TOS renders platform with selective chemotherapy for cancer cells. Remarkably, with these excellent properties, the platform can be used to completely eliminate the solid tumor by safe photothermal therapy, and then kill the residual cancer cells by selective chemotherapy to prevent tumor recurrence. More significantly, barely side effects occur in the whole treatment process. The excellent efficacy and safety benefits in vivo lead to the prominent survival rate of 100% over 91 days.

Conclusion

The safe and efficient platform might be a candidate of clinical nanomedicines for multimode theranostics. This study demonstrates an innovative thought in precise nanomedicine regarding the design of next generation of cancer theranostic protocol for potential clinical practice.

The Multifunctionally Graded System for a Controlled Size Effect on Iron Oxide-Gold Based Core-Shell Nanoparticles

We report that Fe3O4@Au core-shell nanoparticles (NPs) serve as a multifunctional molecule delivery platform. This platform is also suitable for sensing the doxorubicin (DOX) through DNA hybridization, and the amount of carried DOX molecules was determined by size-dependent Fe3O4@Au NPs. The limits of detection (LODs) for DOX was found to be 1.839 nM. In our approach, an Au nano-shell coating was coupled with a specially designed DNA sequence using thiol bonding. By means of a high-frequency magnetic field (HFMF), a high release percentage of such a molecule could be efficiently achieved in a relatively short period of time. Furthermore, the thickness increase of the Au nano-shell affords Fe3O4@Au NPs with a larger surface area and a smaller temperature increment due to shielding effects from magnetic field. The change of magnetic property may enable the developed Fe3O4@Au-dsDNA/DOX NPs to be used as future nanocarrier material. More importantly, the core-shell NP structures were demonstrated to act as a controllable and efficient factor for molecule delivery.

Multifunctional Theranostic Graphene Oxide Nanoflakes as MR Imaging Agents with Enhanced Photothermal and Radiosensitizing Properties

The integration of multiple therapeutic and diagnostic functions into a single nanoplatform for image-guided cancer therapy has been an emerging trend in nanomedicine. We show here that multifunctional theranostic nanostructures consisting of superparamagnetic iron oxide (SPIO) and gold nanoparticles (AuNPs) scaffolded within graphene oxide nanoflakes (GO-SPIO-Au NFs) can be used for dual photo/radiotherapy by virtue of the near-infrared (NIR) absorbance of GO for photothermal therapy (PTT) and the Z element radiosensitization of AuNPs for enhanced radiation therapy (RT). At the same time, this nanoplatform can also be detected by magnetic resonance (MR) imaging because of the presence of SPIO NPs. Using a mouse carcinoma model, GO-SPIO-Au NF-mediated combined PTT/RT exhibited a 1.85-fold and 1.44-fold higher therapeutic efficacy compared to either NF-mediated PTT or RT alone, respectively, resulting in a complete eradication of tumors. As a sensitive multifunctional theranostic platform, GO-SPIO-Au NFs appear to be a promising nanomaterial for enhanced cancer imaging and therapy.

Monitoring of the choline/lipid ratio by 1H-MRS can be helpful for prediction and early detection of tumor response to nano-photo-thermal therapy

Nanotechnology-based photothermal therapy (NPTT) is a new emerging modality of cancer therapy. To have the right prediction and early detection of response to NPTT, it is necessary to get rapid feedback from a tumor treated by NPTT procedure and stay informed of what happens in the tumor site. We performed this study to find if proton magnetic resonance spectroscopy (1H-MRS) can be well responsive to such an imperative requirement. We considered various treatment groups including gold nanoparticles (AuNPs), laser, and the combination of AuNPs and laser (NPTT group). Therapeutic effects on CT26 colon tumor-bearing BALB/c mice were studied by looking at alterations that happened in 1H-MRS signals and tumor size after conducting treatment procedures. In MRS studies, the alterations of choline and lipid concentrations and their ratio were investigated. Having normalized the metabolite peak to water peak, we found a significant decrease in choline concentration post-NPTT (from (1.25 ± 0.05) × 10^-3 to (0.43 ± 0.04) × 10^-3), while the level of lipid concentration in the tumor was slightly increased (from (2.91 ± 0.23) × 10^-3 to (3.52 ± 0.31) × 10^-3). As a result, the choline/lipid ratio was significantly decreased post-NPTT (from 0.41 ± 0.11 to 0.11 ± 0.02). Such alterations appeared just 1 day after NPTT. Tumor shrinkage in all groups was studied and significant changes were significantly detectable on day 7 post-NPTT procedure. In conclusion, the study of choline/lipid ratio using 1H-MRS may help us estimate what happens in a tumor treated by the NPTT method. Such an in vivo assessment is interestingly feasible as soon as just 1 day post-NPTT. This would undoubtedly help the oncologists make a more precise decision about treatment planning strategies. Monitoring of the choline/lipid ratio by ¹H-MRS can be helpful for prediction and early detection of response to nano-photo-thermal therapy.

Tri-modal imaging of gold-dotted magnetic nanoparticles for magnetic resonance imaging, computed tomography and intravascular ultrasound: an in vitro study

Aim: To examine the multimodal contrasting ability of gold-dotted magnetic nanoparticles (Au*MNPs) for magnetic resonance (MR), computed tomography (CT) and intravascular ultrasound (IVUS) imaging. Materials & methods: Au*MNPs were prepared by adapting an impregnation method, without using surface capping reagents and characterized (transmission electron microscopy, x-ray diffraction and Fourier-transform infrared spectroscopy) with their in vitro cytotoxicity assessed, followed by imaging assessments. Results: The contrast-enhancing ability of Au*MNPs was shown to be concentration-dependent across MR, CT and IVUS imaging. The Au content of the Au*MNP led to evident increases of the IVUS signal. Conclusion: We demonstrated that Au*MNPs showed concentration-dependent contrast-enhancing ability in MRI and CT imaging, and for the first-time in IVUS imaging due to the Au content. These Au*MNPs are promising toward solidifying tri-modal imaging-based theragnostics.

Synthesis and Stabilization of Support-Free Mesoporous Gold Nanoparticles

Porous gold nanoparticles (PGNs) are usually prepared in an immobilized form on a solid substrate, which is not practical in many applications. In this work, a simple method is reported for the preparation and stabilization of mesoporous gold particles of a few hundred nanometers in size in aqueous suspension. Nanoparticles of Ag-Au alloy were fabricated on CaF2 and Si/SiO2 substrates by the solid-state dewetting method. Silver was selectively dissolved (dealloyed), and the resulting porous gold nanoparticles were chemically removed from the substrate either in a concerted step with dealloying, or in a subsequent step. Nitric acid was used for the one-step dealloying and detachment of the particles from CaF2 substrate. The consecutive use of HNO3 and HF resulted in the dealloying and the subsequent detachment of the particles from Si/SiO2 substrate. The PGNs were recovered from the aqueous suspensions by centrifugation. The Au content of the suspensions was monitored by using elemental analysis (ICP-OES), and recovery was optimized. The morphology and the optical characteristics of the support-free PGNs were analyzed by scanning electron microscopy (SEM), dynamic light scattering spectroscopy (DLS), and near-infrared spectrophotometry (NIR). The obtained PGNs are spherical disk-shaped with a mean particle size of 765 ± 149 nm. The suspended, support-free PGNs display an ideally narrow dipole plasmon peak at around 1450 nm in the NIR spectral region. Thus, the new colloidal PGNs are ideal candidates for biomedical applications, for instance photothermal therapy.

Multifunctional magnetic iron oxide nanoparticles: an advanced platform for cancer theranostics

Multifunctional magnetic nanoparticles and derivative nanocomposites have aroused great concern for multimode imaging and cancer synergistic therapies in recent years. Among the rest, functional magnetic iron oxide nanoparticles (Fe3O4 NPs) have shown great potential as an advanced platform because of their inherent magnetic resonance imaging (MRI), biocatalytic activity (nanozyme), magnetic hyperthermia treatment (MHT), photo-responsive therapy and drug delivery for chemotherapy and gene therapy. Magnetic Fe3O4 NPs can be synthesized through several methods and easily surface modified with biocompatible materials or active targeting moieties. The MRI capacity could be appropriately modulated to induce response between T1 and T2 modes by controlling the size distribution of Fe3O4 NPs. Besides, small-size nanoparticles are also desired due to the enhanced permeation and retention (EPR) effect, thus the imaging and therapeutic efficiency of Fe3O4 NP-based platforms can be further improved. Here, we firstly retrospect the typical synthesis and surface modification methods of magnetic Fe3O4 NPs. Then, the latest biomedical application including responsive MRI, multimodal imaging, nanozyme, MHT, photo-responsive therapy and drug delivery, the mechanism of corresponding treatments and cooperation therapeutics of multifunctional Fe3O4 NPs are also be explained. Finally, we also outline a brief discussion and perspective on the possibility of further clinical translations of these multifunctional nanomaterials. This review would provide a comprehensive reference for readers to understand the multifunctional Fe3O4 NPs in cancer diagnosis and treatment.

Photothermal Transduction Efficiencies of Plasmonic Group 4 Metal Nitride Nanocrystals

The photothermal transduction efficiencies of group 4 metal nitrides, TiN, ZrN, and HfN, at λ = 850 nm are reported, and the performance of these materials is compared to an Au nanorod benchmark. Transition metal nitride nanocrystals with an average diameter of ∼15 nm were prepared using a solid-state metathesis reaction. HfN exhibited the highest photothermal transduction efficiency of 65%, followed by ZrN (58%) and TiN (49%), which were all higher than those of the commercially purchased Au nanorods (43%). Computational studies performed using a finite element method showed HfN and Au to have the lowest and highest scattering cross section, respectively, which could be a contributing factor to the efficiency trends observed. Furthermore, the changes in temperature as a function of illumination intensity and solution concentration, as well as the cycling stability of the metal nitride solutions, were studied in detail.

Recent advancements in polyethyleneimine-based materials and their biomedical, biotechnology, and biomaterial applications

Precise-synthesis strategies and integration approaches of bioinspired PEI-based systems, and their biomedical, biotechnology and biomaterial applications.

Recent Advances in Magnetite Nanoparticle Functionalization for Nanomedicine

Functionalization of nanomaterials can enhance and modulate their properties and behaviour, enabling characteristics suitable for medical applications. Magnetite (Fe3O4) nanoparticles are one of the most popular types of nanomaterials used in this field, and many technologies being already translated in clinical practice. This article makes a summary of the surface modification and functionalization approaches presented lately in the scientific literature for improving or modulating magnetite nanoparticles for their applications in nanomedicine.

NIR triggered glycosylated gold nanoshell as a photothermal agent on melanoma cancer cells

Nowadays, gold nanoshells are used in targeted nano photothermal cancer therapy. This study surveyed the application of gold nanoshell (GNs) to thermal ablative therapy for melanoma cancer cells and it takes advantage of the near infrared absorption of gold nanoshells. The synthesis and characterization of glycosylated gold nanoshells (GGNs) were done. The cytotoxicity and photothermal effects of GNs on melanoma cells were evaluated using MTT assay and flow cytometry. The characterization data showed that GGNs are spherical, with a hydrodynamic size of 46.7 nm. Results suggest that the cellular uptake of GGNs was about 78%. Viability assays showed no significant toxicity at low concentrations of GNs. The higher heating rate and toxicity of cancer cells were obtained for the cells exposed to 808 nm NIR laser after incubation with GGNs rather than the GNs. The viability of these cells has dramatically decreased by 29%. Furthermore, 61% more cell lethality was achieved for A375 cells using combined photothermal therapy and treatment with GGNs in comparison to NIR radiation alone. In conclusion, our findings suggest that the synthesized gold/silica core-shell nanoparticles conjugated with glucosamine have high potentials to be considered as an efficient metal-nanoshell in the process of targeted cancer photothermal therapy.

Multifunctional magnetic iron oxide nanoparticles: diverse synthetic approaches, surface modifications, cytotoxicity towards biomedical and industrial applications

Magnetic iron oxide nanoparticles (MIONPs) play a major role in the emerging fields of nanotechnology to facilitate rapid advancements in biomedical and industrial platforms. The superparamagnetic properties of MIONPs and their environment friendly synthetic methods with well-defined particle size have become indispensable to obtain their full potential in a variety of applications ranging from cellular to diverse areas of biomedical science. Thus, the broadened scope and need for MIONPs in their demanding fields of applications required to be highlighted for a comprehensive understanding of their state-of-the-art. Many synthetic methods, however, do not entirely abolish their undesired cytotoxic effects caused by free radical production and high iron dosage. In addition, the agglomeration of MIONPs has also been a major problem. To alleviate these issues, suitable surface modification strategies adaptive to MIONPs has been suggested not only for the effective cytotoxicity control but also to minimize their agglomeration. The surface modification using inorganic and organic polymeric materials would represent an efficient strategy to utilize the diagnostic and therapeutic potentials of MIONPs in various human diseases including cancer. This review article elaborates the structural and magnetic properties of MIONPs, specifically magnetite, maghemite and hematite, followed by the important synthetic methods that can be exploited for biomedical approaches. The in vivo cytotoxic effects and the possible surface modifications employed to eliminate the cytotoxicity thereby enhancing the nanoparticle efficacy are also critically discussed. The roles and applications of surface modified MIONPs in medical and industrial platforms have been described for the benefits of global well-being.

Investigating the mechanisms behind extensive death in human cancer cells following nanoparticle assisted photo-thermo-radiotherapy

We have recently reported the synthesis and characterization of gold-coated iron oxide nanoparticle and demonstrated such a nanoparticle (Au@Fe₂O₃ NP) was able to significantly enhance the lethal effects of photo-thermo-radiotherapy. The purpose of this study was to determine the mechanisms behind such an enhancement by investigating the changes induced in cancer cell viability, proliferation, and morphology as well as monitoring the alteration of some genes which play important role in the process of cell death. Using MTT assay and transmission electron microscopy (TEM), the KB cells viability and morphology were assessed after treating with various combinations of NPs, photothermal therapy (PTT), and radiotherapy (RT). Clonogenic assay was used to assess the proliferation ability of treated KB cells. Nanoparticle internalization into the cells was investigated by TEM and inductively coupled plasma (ICP). During the treatment procedures, temperature changes were monitored using an IR-camera. Furthermore, the changes occurred in Bax, BCL2 and HSP70 genes expression level were measured using real-time PCR. The results showed that combination of NP, PTT, and RT caused more cell death compared to PTT or RT alone. Following such a combination therapy, massive cell injury was detected. We also observed an extensive increase in Bax/Bcl2 ratio and HSP70 expression for the KB cells treated by combination therapy procedure. Our results showed that massive cell injury and apoptosis induction are the main reasons of extensive cell death observed in cancer cells when a nanoparticle assisted photo-thermo-radiotherapy procedure is applied.

Reverse Microemulsion Synthesis of Fe3O4-Ag2S Heteronanocrystals for Dual-Modal Imaging-Guided Photothermal Tumor Ablation

Heterojunction nanomaterials have revealed a significant possibility in tumor diagnosis and therapeutic owing to tightly combining two parts of different chemical properties. Herein, we successfully synthesized heterogenous Fe₃O₄-Ag₂S nanocrystals through a reverse microemulsion. Based on the prepared heterostructure, a new drug nanoplatform was developed, which served as a contrast agent for T₂-weighted magnetic resonance imaging, computed tomography imaging, and photothermal imaging. In addition, these Fe₃O₄-Ag₂S heteronanocrystals exhibited a high photothermal conversion efficiency of 75.5% irradiated by a laser of 808 nm wavelength. After injection into glioma cancer mode in vivo, efficient tumor accumulation of Fe₃O₄-Ag₂S heteronanocrystals was observed under triple-modal imaging. The prepared heteronanocrystals further showed an excellent ablated tumor destruction effect through the generated hyperthermia with the irradiation of an 808 nm laser. Our work suggests that the potential of Fe₃O₄-Ag₂S heteronanocrystals may be a promising theranostic agent for multimodal imaging guidance and photothermal therapy toward cancer.

Multimodal Composite Iron Oxide Nanoparticles for Biomedical Applications

Background

Iron oxide nanoparticles (IONPs) are excellent candidates for biomedical imaging because of unique characteristics like enhanced colloidal stability and excellent in vivo biocompatibility. Over the last decade, material scientists have developed IONPs with better imaging and enhanced optical absorbance properties by tuning their sizes, shape, phases, and surface characterizations. Since IONPs could be detected with magnetic resonance imaging, various attempts have been made to combine other imaging modalities, thereby creating a high-resolution imaging platform. Composite IONPs (CIONPs) comprising IONP cores with polymeric or inorganic coatings have recently been documented as a promising modality for therapeutic applications.

Methods

In this review, we provide an overview of the recent advances in CIONPs for multimodal imaging and focus on the therapeutic applications of CIONPs.

Result

CIONPs with phototherapeutics, IONP-based nanoparticles are used for theranostic application via imaging guided photothermal therapy.

Conclusion

CIONP-based nanoparticles are known for theranostic application, longstanding effects of composite NPs in in vivo systems should also be studied. Once such issues are fixed, multifunctional CIONP-based applications can be extended for theranostics of diverse medical diseases in the future.

Large Scale Solid-state Synthesis of Catalytically Active Fe3O4@M (M = Au, Ag and Au-Ag alloy) Core-shell Nanostructures

Solvent-less synthesis of nanostructures is highly significant due to its economical, eco-friendly and industrially viable nature. Here we report a solid state synthetic approach for the fabrication of Fe3O4@M (where M = Au, Ag and Au-Ag alloy) core-shell nanostructures in nearly quantitative yields that involves a simple physical grinding of a metal precursor over Fe3O4 core, followed by calcination. The process involves smooth coating of low melting hybrid organic-inorganic precursor over the Fe3O4 core, which in turn facilitates a continuous shell layer post thermolysis. The obtained core-shell nanostructures are characterized using, XRD, XPS, ED-XRF, FE-SEM and HR-TEM for their phase, chemical state, elemental composition, surface morphology, and shell thickness, respectively. Homogeneous and continuous coating of the metal shell layer over a large area of the sample is ascertained by SAXS and STEM analyses. The synthesized catalysts have been studied for their applicability towards a model catalytic hydrogen generation from NH3BH3 and NaBH4 as hydrogen sources. The catalytic efficacy of the Fe3O4@Ag and Ag rich alloy shell materials are found to be superior to the corresponding Au counterparts. The saturation magnetization studies reveal the potential of the core-shell nanostructured catalysts to be magnetically recoverable and recyclable.

Combinatorial effects of radiofrequency hyperthermia and radiotherapy in the presence of magneto-plasmonic nanoparticles on MCF-7 breast cancer cells

Here, the effects of combinatorial cancer therapy including radiotherapy (RT) and radiofrequency (RF) hyperthermia in the presence of gold-coated iron oxide nanoparticles (Au@IONPs), as a thermo-radio-sensitizer, are reported. The level of cell death and the ratio of Bax/Bcl2 genes, involved in the pathway of apoptosis, were measured to evaluate the synergistic effect of Au@IONPs-mediated RF hyperthermia and RT. MCF-7 human breast adenocarcinoma cells were treated with different concentrations of Au@IONPs. After incubation with NPs, the cells were exposed to RF waves (13.56 MHz; 100 W; 15 min). At the same time, thermometry was performed with an infrared (IR) camera. Then, the cells were exposed to 6 MV X-ray at various doses of 2 and 4 Gy. MTT (3-[4,5-dimethylthiazol-2-y1]-2,5-diphenyltetrazolium bromide) assay was performed to evaluate cell viability and quantitative real-time polymerase chain reaction (qRT-PCR) was used to determine the expression ratio of Bax/Bcl2. Cellular uptake of nanoparticles was confirmed qualitatively and quantitatively. The results obtained from MTT assay and qRT-PCR studies showed that NPs and RF hyperthermia had no significant effect when applied separately, while their combination had synergistic effects on cell viability percentage and the level of apoptosis induction. A synergistic effect was also observed when the cancer cells were treated with a combination of NPs, RF hyperthermia, and RT. On the basis of the obtained results, it may be concluded that the use of magneto-plasmonic NPs in the process of hyperthermia and RT of cancer holds a great promise to develop a new combinatorial cancer therapy strategy.

Photoacoustic and fluorescent effects in multilayer plasmon-dye interfaces

Progress in understanding the cell biology and diseases depends on advanced imaging and labeling techniques. Here, we address this demand by exploring novel multilayered nanocomposites (MNCs) with plasmonic nanoparticles and absorbing dyes in thin nonabsorbing shells as supercontrast multimodal photoacoustic (PA) and fluorescent agents in the near-infrared range. The proof of concept was performed with gold nanorods (GNRs) and indocyanine green (ICG) dispersed in a matrix of biodegradable polymers. We demonstrated synergetic PA effects in MNCs with the gold-ICG interface that could not be achieved with ICG and GNRs alone. We also observed ultrasharp PA and emission peaks that could be associated with nonlinear PA and spaser effects, respectively. Low-toxicity multimodal MNCs with unique plasmonic, thermal and acoustic properties have the potential to make a breakthrough in PA flow cytometry and near-infrared spasers in vivo by using the synergetic interaction of plasmonic modes with a nearby absorbing medium.

Nanoheterostructures (NHS) and Their Applications in Nanomedicine: Focusing on In Vivo Studies

Inorganic nanoparticles have great potential for application in many fields, including nanomedicine. Within this class of materials, inorganic nanoheterostructures (NHS) look particularly promising as they can be formulated as the combination of different domains; this can lead to nanosystems with different functional properties, which, therefore, can perform different functions at the same time. This review reports on the latest development in the synthesis of advanced NHS for biomedicine and on the tests of their functional properties in in vivo studies. The literature discussed here focuses on the diagnostic and therapeutic applications with special emphasis on cancer. Considering the diagnostics, a description of the NHS for cancer imaging and multimodal imaging is reported; more specifically, NHS for magnetic resonance, computed tomography and luminescence imaging are considered. As for the therapeutics, NHS employed in magnetic hyperthermia or photothermal therapies are reported. Examples of NHS for cancer theranostics are also presented, emphasizing their dual usability in vivo, as imaging and therapeutic tools. Overall, NHS show a great potential for biomedicine application; further studies, however, are necessary regarding the safety associated to their use.

Polydopamine-coated magnetic mesoporous silica nanoparticles for multimodal cancer theranostics

Polydopamine-coated mesoporous silica nanoparticles loaded with ultrasmall Fe₃O₄ nanoparticles can be prepared for multimodal imaging and combination therapy of tumors.

Tunable fabrication of new theranostic Fe3O4-black TiO2 nanocomposites: dual wavelength stimulated synergistic imaging-guided phototherapy in cancer

The development of a simplified theranostic system with high-efficiency for multifunctional imaging-guided photodynamic therapy/photothermal therapy (PDT/PTT) is a great challenge.

Precise control of apoptosis via gold nanostars for dose dependent photothermal therapy of melanoma

Precise induction and monitoring of cell apoptosis are significant for cancer treatment.

A polydopamine-coated LAPONITE®-stabilized iron oxide nanoplatform for targeted multimodal imaging-guided photothermal cancer therapy

A novel targeted theranostic nanoplatform (LAP–Fe₃O₄@PDA–PEG–PBA) is constructed for magnetic resonance and photoacoustic imaging-guided photothermal therapy of cancer cells overexpressing sialic acid.

Stacking of doxorubicin on folic acid-targeted multiwalled carbon nanotubes for in vivo chemotherapy of tumors

In this work, we developed a novel active targeting and pH-responsive system for delivering the drug doxorubicin (DOX) to tumor sites using folic acid (FA)-modified multiwalled carbon nanotubes (MWCNTs). Acid-treated MWCNTs with carboxyl groups were first covalently conjugated with polyethyleneimine (PEI). Subsequent sequential modification with FA (via a polyethylene glycol spacer), fluorescein isothiocyanate (FI), and acetic anhydride/triethylamine resulted in multifunctional FA-bound MWCNT (MWCNT-PEI.Ac-FI-PEG-FA) nanomaterials that possessed exceptional colloidal stability and good biocompatibility in a given concentration range. The FA-bound MWCNTs were characterized using various techniques and exhibited a high drug loading and an encapsulation efficiency as high as 70.4%. DOX/MWCNT-PEI.Ac-FI-PEG-FA nanocomplexes (DOX/MWCNT NCs) exhibited pH-responsive release in acidic environments. Importantly, the DOX/MWCNT NCs targeted tumor cells overexpressing FA receptors (FARs) and effectively inhibited their growth. In vivo anticancer experiments demonstrated that DOX/MWCNT NCs not only enhanced the suppression of tumor growth but also decreased the side effects of free DOX. The developed FA-modified MWCNTs with an unconventionally high DOX loading boosted in vivo anti-tumor efficacy, and the lower systemic toxicity may be utilized for tumor therapy upon clinical translation.

Targeted tumor dual mode CT/MR imaging using multifunctional polyethylenimine-entrapped gold nanoparticles loaded with gadolinium

We report the construction and characterization of polyethylenimine (PEI)-entrapped gold nanoparticles (AuNPs) chelated with gadolinium (Gd) ions for targeted dual mode tumor CT/MR imaging in vivo. In this work, polyethylene glycol (PEG) monomethyl ether-modified PEI was sequentially modified with Gd chelator and folic acid (FA)-linked PEG (FA-PEG) was used as a template to synthesize AuNPs, followed by Gd(III) chelation and acetylation of the remaining PEI surface amines. The formed FA-targeted PEI-entrapped AuNPs loaded with Gd (FA-Gd-Au PENPs) were well characterized in terms of structure, composition, morphology, and size distribution. We show that the FA-Gd-Au PENPs with an Au core size of 3.0 nm are water dispersible, colloidally stable, and noncytotoxic in a given concentration range. Thanks to the coexistence of Au and Gd elements within one nanoparticulate system, the FA-Gd-Au PENPs display a better X-ray attenuation property than clinical iodinated contrast agent (e.g. Omnipaque) and reasonable r1 relaxivity (1.1 mM-1s-1). These properties allow the FA-targeted particles to be used as an efficient nanoprobe for dual mode CT/MR imaging of tumors with excellent FA-mediated targeting specificity. With the demonstrated organ biocompatibility, the designed FA-Gd-Au PENPs may hold a great promise to be used as a nanoprobe for CT/MR dual mode imaging of different FA receptor-overexpressing tumors.

Therapeutic applications of iron oxide based nanoparticles in cancer: basic concepts and recent advances

Nanotechnology has introduced new techniques and phototherapy approaches to fabricate and utilize nanoparticles for cancer therapy. These phototherapy approaches, such as photothermal therapy (PTT) and photodynamic therapy (PDT), hold great promise to overcome the limitations of traditional treatment methods. In phototherapy, magnetic iron oxide nanoparticles (IONPs) are of paramount importance due to their wide range of biomedical applications. This review discusses the basic concepts, various therapy approaches (PTT, PDT, magnetic hyperthermia therapy (MHT), chemotherapy and immunotherapy), intrinsic properties, and mechanisms of cell death of IONPs; it also provides a brief overview of recent developments in IONPs, with focus on their therapeutic applications. Much attention is devoted to elaborating the various parameters, intracellular behaviors and limitations of MHT. Bimodal therapies which act alone or in combination with other modalities are also discussed. The review highlights some limitations in the explored research areas and suggests future directions to overcome these limitations.

Decorating gold nanostars with multiwalled carbon nanotubes for photothermal therapy

Gold nanoparticles and carbon nanotubes have attracted substantial attention in recent years for their potential applications in photothermal therapy (PTT) as an emerging breakthrough in cancer treatment. Herein, a hybrid nanomaterial of gold nanostars/multiwalled carbon nanotubes (MWCNTs) was synthesized by two-step reduction via the control of several synthetic conditions such as the reducing agent, pH value, concentration and ratio of reagents. The material shows good biocompatibility and high photothermal conversion efficiency, demonstrating its applicability in PTT. The lack of surfactant in the synthesis process made the hybrid nanomaterial cell-friendly, with no effects on viability in vitro. The MWCNT/gold nanostars hybrid nanomaterial presented 12.4% higher photothermal efficiency than gold nanostars alone and showed a 2.4-fold increase over gold nanospheres based on a heating test under 808 nm laser irradiation. Moreover, the MWCNTs/gold nanostars at low concentration (0.32 nM) exhibited remarkably improved photothermal cancer cell-killing efficacy, which may be attributed to the surface plasmon resonance absorption of the gold nanostars and the combined effects of enhanced coupling between the MWCNTs and gold nanostars. Collectively, these results demonstrate that the MWCNTs/gold nanostars developed herein show prominent photothermal value, and thus may serve as a novel photothermal agent for cancer therapy.

Iron Oxide Nanoparticles in Photothermal Therapy

Photothermal therapy is a kind of therapy based on increasing the temperature of tumoral cells above 42 °C. To this aim, cells must be illuminated with a laser, and the energy of the radiation is transformed in heat. Usually, the employed radiation belongs to the near-infrared radiation range. At this range, the absorption and scattering of the radiation by the body is minimal. Thus, tissues are almost transparent. To improve the efficacy and selectivity of the energy-to-heat transduction, a light-absorbing material, the photothermal agent, must be introduced into the tumor. At present, a vast array of compounds are available as photothermal agents. Among the substances used as photothermal agents, gold-based compounds are one of the most employed. However, the undefined toxicity of this metal hinders their clinical investigations in the long run. Magnetic nanoparticles are a good alternative for use as a photothermal agent in the treatment of tumors. Such nanoparticles, especially those formed by iron oxides, can be used in combination with other substances or used themselves as photothermal agents. The combination of magnetic nanoparticles with other photothermal agents adds more capabilities to the therapeutic system: the nanoparticles can be directed magnetically to the site of interest (the tumor) and their distribution in tumors and other organs can be imaged. When used alone, magnetic nanoparticles present, in theory, an important limitation: their molar absorption coefficient in the near infrared region is low. The controlled clustering of the nanoparticles can solve this drawback. In such conditions, the absorption of the indicated radiation is higher and the conversion of energy in heat is more efficient than in individual nanoparticles. On the other hand, it can be designed as a therapeutic system, in which the heat generated by magnetic nanoparticles after irradiation with infrared light can release a drug attached to the nanoparticles in a controlled manner. This form of targeted drug delivery seems to be a promising tool of chemo-phototherapy. Finally, the heating efficiency of iron oxide nanoparticles can be increased if the infrared radiation is combined with an alternating magnetic field.

Controllable synthesis of Fe3O4 nanoflowers: enhanced imaging guided cancer therapy and comparison of photothermal efficiency with black-TiO2

Photothermal therapy (PTT) has emerged as one of the promising cancer therapy approaches. However, nanoparticles (NPs) which are used for PTT might be biopersistent and potentially toxic. The current research explores the promising use of Fe₃O₄ nanoflowers as nontoxic, efficient photothermal, and strong T₂ type magnetic resonance imaging (MRI) contrast agents for imaging-guided photothermal cancer therapy. In this study, a facile solvothermal method is used to fabricate PEG-coated Fe₃O₄ nanoflowers with controllable dimensions. Their successful fabrication, the effect of the reaction parameters, and their magnetic properties are investigated in depth. The therapeutic performance of the Fe₃O₄ nanoflowers (Fe-NFs) is evaluated and compared with commercially available black TiO₂ nanoparticles (b-TiO₂) under an 808 nm laser. The photothermal therapy efficiency of the Fe-NFs is observed to be better than that of the reported Fe₃O₄ nanoparticles. In vitro and in vivo investigation demonstrates that the therapeutic performance of the Fe-NFs is comparable to that of b-TiO₂. Moreover, the Fe-NFs show excellent magnetic properties and magnetic resonance imaging capability to monitor therapeutic performance.

Distributions: The Importance of the Chemist's Molecular View for Biological Materials

Characterization of materials with biological applications and assessment of physiological effects of therapeutic interventions are critical for translating research to the clinic and preventing adverse reactions. Analytical techniques typically used to characterize targeted nanomaterials and tissues rely on bulk measurement. Therefore, the resulting data represent an average structure of the sample, masking stochastic (randomly generated) distributions that are commonly present. In this Perspective, we examine almost 20 years of work our group has done in different fields to characterize and control distributions. We discuss the analytical techniques and statistical methods we use and illustrate how we leverage them in tandem with other bulk techniques. We also discuss the challenges and time investment associated with taking such a detailed view of distributions as well as the risks of not fully appreciating the extent of heterogeneity present in many systems. Through three case studies showcasing our research on conjugated polymers for drug delivery, collagen in bone, and endogenous protein nanoparticles, we discuss how identification and characterization of distributions, i.e., a molecular view of the system, was critical for understanding the observed biological effects. In all three cases, data would have been misinterpreted and insights missed if we had only relied upon spatially averaged data. Finally, we discuss how new techniques are starting to bridge the gap between bulk and molecular level analysis, bringing more opportunity and capacity to the research community to address the challenges of distributions and their roles in biology, chemistry, and the translation of science and engineering to societal challenges.