A Facile Electrochemical Preparation of Reduced Graphene Oxide@Polydopamine Composite: A Novel Electrochemical Sensing Platform for Amperometric Detection of Chlorpromazine

Facile, eco-friendly and sensitive fluorimetric approach for detection of chlorpromazine: Application in biological fluids and tablet formulations as well as greenness evaluation of the analytical method

Monitoring antipsychotic drugs in biological fluids, such as human serum and urine, is important for ensuring the safety and efficacy of psychiatric treatments. This process helps maintain therapeutic drug levels, minimize side effects, and optimize patient well-being. Chlorpromazine (CZ) is a widely prescribed antipsychotic drug used for conditions like schizophrenia, bipolar disorder, and acute psychosis. Almost all existing sensing techniques for CZ are either insensitive spectrophotometric methods or involve long and complex chromatographic procedures, limiting their routine use. In this work, we introduce a facile, green, and sensitive fluorimetric strategy with high reproducibility for detecting CZ in its pure form, tablet formulation, and spiked human plasma and urine without the need for derivatization reactions. The proposed method relies on the inhibition of the intramolecular photoinduced electron transfer (PET) effect by using 2.0 M acetic acid. This approach enables the linear detection of CZ from 3.0 to 600 ng/mL with remarkably low quantitation and detection limits of 1.51 and 0.49 ng/mL, respectively. Moreover, the developed method's greenness was evaluated.

Comparative performance analysis of mussel-inspired polydopamine, polynorepinephrine, and poly-α-methyl norepinephrine in electrochemical biosensors

Polydopamine (PDA) has garnered significant interest for applications in biosensors, drug delivery, and tissue engineering. However, similar polycatecholamines like polynorepinephrine (PNE) with additional hydroxyl groups and poly-α-methylnorepinephrine (PAMN) with additional hydroxyl and methyl groups remain unexplored in the biosensing domain. This research introduces three innovative biosensing platforms composed of ternary nanocomposite based on reduced graphene oxide (RGO), gold nanoparticles (Au NPs), and three sister polycatecholamine compounds (PDA, PNE, and PAMN). The study compares and evaluates the performance of the three biosensing systems for the ultrasensitive detection of Mycobacterium tuberculosis (MTB). The formation of the nanocomposites was meticulously examined through UV-Visible, Raman, XRD, and FT-IR studies with FE-SEM and HR-TEM analysis. Cyclic voltammetry and differential pulse voltammetry measurements were also performed to determine the electrochemical characteristics of the modified electrodes. Electrochemical biosensing experiments reveal that the RGO-PDA-Au, RGO-PNE-Au, and RGO-PAMN-Au-based biosensors detected target DNA up to a broad detection range of 0.1 × 10-8 to 0.1 × 10-18 M, with a low detection limit (LOD) of 0.1 × 10-18, 0.1 × 10-16, and 0.1 × 10-17 M, respectively. The bioelectrodes were proved to be highly selective with excellent sensitivities of 3.62 × 10-4 mA M-1 (PDA), 7.08 × 10-4 mA M-1 (PNE), and 6.03 × 10-4 mA M-1 (PAMN). This study pioneers the exploration of two novel mussel-inspired polycatecholamines in biosensors, opening avenues for functional nanocoatings that could drive further advancements in this field.

Design of sonochemical assisted synthesis of Zr-MOF/g-C3N4-modified electrode for ultrasensitive detection of antipsychotic drug chlorpromazine from biological samples

The rapid fabrication is described of binary electrocatalyst based on a highly porous metal-organic framework with zirconium metal core (Zr-MOF) decorated over the graphitic carbon nitride (g-C3N4) nanosheets via facile ultrasonication method. It is used for the robust determination of antipsychotic drug chlorpromazine (CLP) from environmental samples. The electrochemical behaviour of 2D Zr-MOF@g-C3N4 was characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) studies. The crystalline and porous nature of the composite was characterized by XRD and SEM analysis. The functional groups and surface characteristics were investigated by FT-IR, Raman and XPS. The major electrochemical properties of the Zr-MOF@g-C3N4 composite towards CLP detection were analyzed by CV, chronocoulometric (CC), chronoamperometric (CA) and differential pulse voltammetry (DPV) techniques. The composite exhibits a low detection limit (LOD) of 2.45 nM with a linear range of 0.02 to 2.99 µM and attractive sensitivity for CLP. The sensor system shows higher selectivity towards the possible interferences of CLP drug and exhibits better repeatability and stability. Finally, the fabricated sensor system shows a high recovery range varying from 96.2 to 98.9% towards the real samples. The proposed electrochemical probe might be a promising alternative to the prevailing diagnostic tools for the detection of CLP.

Dielectric Elastomers with Liquid Metal and Polydopamine-Coated Graphene Oxide Inclusions

Suspending microscale droplets of liquid metals like eutectic gallium-indium (EGaIn) in polydimethylsiloxane (PDMS) has been shown to dramatically enhance electrical permittivity without sacrificing the elasticity of the host PDMS matrix. However, increasing the dielectric constant of EGaIn-PDMS composites beyond previously reported values requires high EGaIn loading fractions (>50% by volume) that can result in substantial increases in density and loss of material integrity. In this work, we enhance permittivity without further increasing EGaIn loading by incorporating polydopamine (PDA)-coated graphene oxide (GO) and partially reduced GO. In particular, we show that the combination of EGaIn and PDA-GO within a PDMS matrix results in an elastomer composite with a high dielectric constant (∼10-57), a low dissipation factor (∼0.01), and rubber-like compliance and elasticity.

Ternary nanocomposite-based smart sensor: Reduced graphene oxide/polydopamine/alanine nanocomposite for simultaneous electrochemical detection of Cd2+, Pb2+, Fe2+, and Cu2+ ions

Heavy metal ion (HMI) sensors are the most sought commercial devices for environmental monitoring and food analysis research due to serious health concerns associated with HMI overdosage. Herein, we developed an effective electrochemical sensor for simultaneous detection of four HMI (Cd²⁺, Pb²⁺, Fe²⁺, and Cu²⁺) using a ternary nanocomposite of reduced graphene oxide functionalized with polydopamine and alanine (ALA/pDA/rGO). Comprehensive spectroscopic and microscopic characterizations were performed to ensure the formation of the ternary nanocomposite. The developed nanocomposite on glassy carbon electrode (GCE) yields >2-fold higher current than GO/GCE electrode with excellent electrochemical stability and charge transfer rate. Using DPV, various chemical and electrochemical parameters, such as supporting electrolyte, buffer pH, metal deposition time, and potential, were optimized to achieve highly sensitive detection of targeted HMI. For Cd²⁺, Pb²⁺, Fe²⁺, and Cu²⁺ sensing devised sensor exhibited detection limits of 1.46, 2.86, 50.23, and 17.95 ppb and sensitivity of 0.0929, 0.0744, 0.0051, and 0.0394 μA/ppb, respectively, with <6% interference. The sensor worked similarly well for real water samples with HMI. This study demonstrates a novel strategy for concurrently detecting and quantifying multiple HMI in water and soil using a smart ternary nanocomposite-based electrochemical sensor, which can also detect HMI in food samples.

Reduced Graphene Oxide-Polydopamine-Gold Nanoparticles: A Ternary Nanocomposite-Based Electrochemical Genosensor for Rapid and Early Mycobacterium tuberculosis Detection

Tuberculosis (TB) has been a devastating human illness for thousands of years. According to the WHO, around 10.4 million new cases of tuberculosis are identified every year, with 1.8 million deaths. To reduce these statistics and the mortality rate, an early and accurate TB diagnosis is essential. This study offers a highly sensitive and selective electrochemical biosensor for Mycobacterium tuberculosis (MTB) detection based on a ternary nanocomposite of reduced graphene oxide, polydopamine, and gold nanoparticles (rGO-PDA-AuNP). Avidin-biotin coupling was used to bind the MTB probe DNA onto the rGO-PDA-AuNP modified glassy carbon electrode (ssDNA/avidin/rGO-PDA-AuNP). UV-Visible, Raman, XRD, and TEM were used to evaluate the structural and morphological characteristics of rGO-PDA-AuNP. Furthermore, DNA immobilization is validated using FESEM and FT-IR techniques. The modified electrodes were electrochemically analyzed using cyclic voltammetry (CV) and linear sweep voltammetry (LSV), and the results indicate that the produced electrode can detect target DNA up to 0.1 × 10^-7 mM with 2.12 × 10^-3 mA µM^-1 sensitivity and a response time of 5 s. The constructed genosensor displayed high sensitivity and stability, and it also provides a unique strategy for diagnosing MTB at an early stage. Furthermore, our rGO-PDA-AuNP/GCE-based electrochemical platform has broad potential for creating biosensor systems for detecting various infectious pathogens and therapeutically significant biomarkers.

Simultaneous Determination of Xanthine and Hypoxanthine Using Polyglycine/rGO-Modified Glassy Carbon Electrode

A novel electrochemical sensor was developed for selective and sensitive determination of xanthine (XT) and hypoxanthine (HX) based on polyglycine (p-Gly) and reduced graphene oxide (rGO) modified glassy carbon electrode (GCE). A mixed dispersion of 7 μL of 5 mM glycine and 1 mg/mL GO was dropped on GCE for the fabrication of p-Gly/rGO/GCE, followed by cyclic voltammetric sweeping in 0.1 M phosphate buffer solution within -0.45~1.85 V at a scanning rate of 100 mV·s^-1. The morphological and electrochemical features of p-Gly/rGO/GCE were investigated by scanning electron microscopy and cyclic voltammetry. Under optimal conditions, the linear relationship was acquired for the simultaneous determination of XT and HX in 1-100 μM. The preparation of the electrode was simple and efficient. Additionally, the sensor combined the excellent conductivity of rGO and the polymerization of Gly, demonstrating satisfying simultaneous sensing performance to both XT and HX.

Disposable Electrochemical Sensors for Highly Sensitive Detection of Chlorpromazine in Human Whole Blood Based on the Silica Nanochannel Array Modified Screen-Printed Carbon Electrode

Rapid and highly sensitive quantitative analysis of chlorpromazine (CPZ) in human whole blood is of great importance for human health. Herein, we utilize the screen-printed carbon electrodes (SPCE) as the electrode substrates for growth of highly electroactive and antifouling nanocomposite materials consisting of vertically ordered mesoporous silica films (VMSF) and electrochemically reduced graphene oxide (ErGO) nanosheets. The preparation of such VMSF/ErGO/SPCE could be performed by using an electrochemical method in a few seconds and the operation is controllable. Inner ErGO layer converted from graphene oxide (GO) in the growth process of VMSF provides oxygen-containing groups and two-dimensional π-conjugated planar structure for stable fabrication of outer VMSF layer. Owing to the π-π enrichment and excellent electrocatalytic abilities of ErGO, electrostatic preconcentration and antifouling capacities of VMSF, and inherent disposable and miniaturized properties of SPCE, the proposed VMSF/ErGO/SPCE sensor could be applied for quantitative determination of CPZ in human whole blood with high accuracy and sensitivity, good stability, and low sample consumption.

Strategies, advances, and challenges associated with the use of graphene-based nanocomposites for electrochemical biosensors

Graphene is an intriguing two-dimensional honeycomb-like carbon material with a unique basal plane structure, charge carrier mobility, thermal conductivity, wide electrochemical spectrum, and unusual physicochemical properties. Therefore, it has attracted considerable scientific interest in the field of nanoscience and bionanotechnology. The high specific surface area of graphene allows it to support high biomolecule loading for good detection sensitivity. As such, graphene, graphene oxide (GO), and reduced GO are excellent materials for the fabrication of new nanocomposites and electrochemical sensors. Graphene has been widely used as a chemical building block and/or scaffold with various materials to create highly sensitive and selective electrochemical sensing microdevices. Over the past decade, significant advancements have been made by utilizing graphene and graphene-based nanocomposites to design electrochemical sensors with enhanced analytical performance. This review focus on the synthetic strategies, as well as the structure-to-function studies of graphene, electrochemistry, novel multi nanocomposites combining graphene, limit of detection, stability, sensitivity, assay time. Finally, the review describes the challenges, strategies and outlook on the future development of graphene sensors technology that would be usable for the internet of things are also highlighted.

Graphene and its derivatives: understanding the main chemical and medicinal chemistry roles for biomedical applications

Over the past few years, there has been a growing potential use of graphene and its derivatives in several biomedical areas, such as drug delivery systems, biosensors, and imaging systems, especially for having excellent optical, electronic, thermal, and mechanical properties. Therefore, nanomaterials in the graphene family have shown promising results in several areas of science. The different physicochemical properties of graphene and its derivatives guide its biocompatibility and toxicity. Hence, further studies to explain the interactions of these nanomaterials with biological systems are fundamental. This review has shown the applicability of the graphene family in several biomedical modalities, with particular attention for cancer therapy and diagnosis, as a potent theranostic. This ability is derivative from the considerable number of forms that the graphene family can assume. The graphene-based materials biodistribution profile, clearance, toxicity, and cytotoxicity, interacting with biological systems, are discussed here, focusing on its synthesis methodology, physicochemical properties, and production quality. Despite the growing increase in the bioavailability and toxicity studies of graphene and its derivatives, there is still much to be unveiled to develop safe and effective formulations.

Graphic abstract

A dry electroencephalogram electrode for applications in steady-state visual evoked potential-based brain-computer interface systems

High-efficiency electroencephalogram (EEG) dry electrodes are a key component of brain-computer interface (BCI) technology because of their direct contact with the scalp. In this study, a semi-flexible polydopamine (PDA)/Pt-TiO₂ electrode is prepared for the dry-contact acquisition of EEG signals. The PDA biofilm adheres strongly to the scalp and maintains a dynamic balance of water and ions. The Pt nanoparticles and TiO₂ nanotube array together result in fast electron transfer. Therefore, the interface impedance between the dry PDA/Pt-TiO₂ electrode and scalp is as low as 19.63-24.53 kΩ. The spontaneous EEG signal collected simultaneously using the dry PDA/Pt-TiO₂ and wet Ag/AgCl electrodes had a correlation coefficient of up to 99.9%. In a steady-state visual evoked potential (SSVEP)-based BCI system, the dry electrode was used to collect EEG feedback signals for stimulations at 27 different frequencies in the range of 7-19.25 Hz. For these feedback signals, O1, Oz, and O2 channels in the occipital area exhibited high signal-to-noise ratios of 11.3, 11.8, and 11 dB, respectively. A volunteer wore an EEG headband with three PDA/Pt-TiO₂ dry electrodes and successfully controlled the robotic arm of the SSVEP-BCI system in the untrained mode. The dry PDA/Pt-TiO₂ electrode-based EEG cap is comfortable to wear, the identification signals of the SSVEP paradigm are accurate, and it is suitable for controlling external devices including a keyboard in the SSVEP-BCI system.

Polydopamine Functionalized Graphene Oxide as Membrane Nanofiller: Spectral and Structural Studies

High-degree functionalization of graphene oxide (GO) nanoparticles (NPs) using polydopamine (PDA) was conducted to produce polydopamine functionalized graphene oxide nanoparticles (GO-PDA NPs). Aiming to explore their potential use as nanofiller in membrane separation processes, the spectral and structural properties of GO-PDA NPs were comprehensively analyzed. GO NPs were first prepared by the oxidation of graphite via a modified Hummers method. The obtained GO NPs were then functionalized with PDA using a GO:PDA ratio of 1:2 to obtain highly aminated GO NPs. The structural change was evaluated using XRD, FTIR-UATR, Raman spectroscopy, SEM and TEM. Several bands have emerged in the FTIR spectra of GO-PDA attributed to the amine groups of PDA confirming the high functionalization degree of GO NPs. Raman spectra and XRD patterns showed different crystalline structures and defects and higher interlayer spacing of GO-PDA. The change in elemental compositions was confirmed by XPS and CHNSO elemental analysis and showed an emerging N 1s core-level in the GO-PDA survey spectra corresponding to the amine groups of PDA. GO-PDA NPs showed better dispersibility in polar and nonpolar solvents expanding their potential utilization for different purposes. Furthermore, GO and GO-PDA-coated membranes were prepared via pressure-assisted self-assembly technique (PAS) using low concentrations of NPs (1 wt. %). Contact angle measurements showed excellent hydrophilic properties of GO-PDA with an average contact angle of (27.8°).

Polydopamine/graphene/MnO2 composite-based electrochemical sensor for in situ determination of free tryptophan in plants

The in vivo detection of small active molecules in plant tissues is essential for the development of precision agriculture. Tryptophan (Trp) is an important precursor material for auxin biosynthesis in plants, and the detection of Trp levels in plants is critical for regulating the plant growth process. In this study, an electrochemical plant sensor was fabricated by electrochemically depositing a polydopamine (PDA)/reduced graphene oxide (RGO)-MnO₂ nanocomposite onto a glassy carbon electrode (GCE). PDA/RGO-MnO₂/GCE exhibited high electrocatalytic activity for the oxidation of Trp owing to the combined selectivity of PDA and catalytic activity of RGO-MnO₂. To address the pH variability of plants, a reliable Trp detection program was proposed for selecting an appropriate quantitative detection model for the pH of the plant or plant tissue of interest. Therefore, a series of linear regression curves was constructed in the pH range of 4.0-7.0 using the PDA/RGO-MnO₂/GCE-based sensor. In this pH range, the linear detection range of Trp was 1-300 μM, the sensitivity was 0.39-1.66 μA μM^-1, and the detection limit was 0.22-0.39 μM. Moreover, the practical applicability of the PDA/RGO-MnO₂/GCE-based sensor was successfully demonstrated by determining Trp in tomato fruit and juice. This sensor stably and reliably detected Trp levels in tomatoes in vitro and in vivo, demonstrating the feasibility of this research strategy for the development of electrochemical sensors for measurements in various plant tissues.

Electrocatalytic enhancement of platinum and palladium metal on polydopamine reduced graphene oxide support for alcohol oxidation

The objective of our work is to improve low-temperature fuel cell catalysts by increasing the surface area to augment the efficiency of catalytic reactions. Reduced graphene oxide (rGO) supports were prepared by adding N-containing derivatives of polydopamine (PDA) and loading of Pt and Pt-based metal alloy nanoparticles were accomplished for catalyst preparation. To study the effects of surface modification on catalyst activity, the GO surfaces modified by addition of PDA (PDA-rGO) were richer in oxygen- and nitrogen-containing functional groups, which reduced the number of graphene defects. Reduction of metals (M = Pt, Pd, Pt_xPd_y where x and y = 1-3) by NaBH₄ produced M/GO (metal on GO) and M/PDA-rGO (metal on PDA-rGO) catalysts. Examination of morphology and chemical composition confirmed that the existence of particle size on M/PDA-rGO catalysts was smaller than that on M/GO catalysts in agreement with calculated electrochemically active surface areas (ECSA). Electrochemical analysis was conducted to evaluate the catalyst activity and stability. The prepared catalysts had significantly greater surface areas as a result of association between the metal nanoparticles and the oxygen and nitrogen functional groups on the rGO supports. The catalysts also exhibited lower onset potentials and greater current intensities, I_f/I_b values, and long-term stabilities for methanol and ethanol oxidation compared with those of commercial PtRu/C. Moreover, the diameter of the Nyquist plot of the catalysts on PDA-rGO were smaller than that of the catalysts M/GO. The results suggest that variation of the Pt_xPd_y atomic ratio on carbon nanocomposites is an encouraging means of enhancing electrocatalytic performance in direct alcohol fuel cell applications.

CVD graphene as an electrochemical sensing platform for simultaneous detection of biomolecules

The development of electrochemical biosensors for the simultaneous detection of ascorbic acid (AA), dopamine (DA), uric acid (UA), tryptophan (Trp), and nitrite ([Formula: see text]) in human serum is reported in this work. Free-standing graphene nanosheets were fabricated on Ta wire using the chemical vapor deposition (CVD) method. CVD graphene, which here served as a sensing platform, provided a highly sensitive and selective option, with detection limits of AA, DA, UA, Trp, and [Formula: see text] of 1.58, 0.06, 0.09, 0.10, and 6.45 μM (S/N = 3), respectively. The high selectivity of the electrode is here explained by a relationship between the bandgap energy of analyte and the Fermi level of graphene. The high sensitivity in the oxidation current was determined by analyzing the influence of the high surface area and chemical structure of free-standing graphene nanosheets on analyte adsorption capacity. This finding strongly indicates that the CVD graphene electrode can be used as a biosensor to detect five analytes in human serum.

Biofunctionalized conductive polymers enable efficient CO2 electroreduction

Selective electrocatalysts are urgently needed for carbon dioxide (CO₂) reduction to replace fossil fuels with renewable fuels, thereby closing the carbon cycle. To date, noble metals have achieved the best performance in energy yield and faradaic efficiency and have recently reached impressive electrical-to-chemical power conversion efficiencies. However, the scarcity of precious metals makes the search for scalable, metal-free, CO₂ reduction reaction (CO₂RR) catalysts all the more important. We report an all-organic, that is, metal-free, electrocatalyst that achieves impressive performance comparable to that of best-in-class Ag electrocatalysts. We hypothesized that polydopamine-a conjugated polymer whose structure incorporates hydrogen-bonded motifs found in enzymes-could offer the combination of efficient electrical conduction, together with rendered active catalytic sites, and potentially thereby enable CO₂RR. Only by developing a vapor-phase polymerization of polydopamine were we able to combine the needed excellent conductivity with thin film-based processing. We achieve catalytic performance with geometric current densities of 18 mA cm^-2 at 0.21 V overpotential (-0.86 V versus normal hydrogen electrode) for the electrosynthesis of C₁ species (carbon monoxide and formate) with continuous 16-hour operation at >80% faradaic efficiency. Our catalyst exhibits lower overpotentials than state-of-the-art formate-selective metal electrocatalysts (for example, 0.5 V for Ag at 18 mA cm^-1). The results confirm the value of exploiting hydrogen-bonded sequences as effective catalytic centers for renewable and cost-efficient industrial CO₂RR applications.

Integrating nanohybrid membranes of reduced graphene oxide: chitosan: silica sol gel with fiber optic SPR for caffeine detection

Caffeine is the most popular psychoactive drug consumed in the world for improving alertness and enhancing wakefulness. However, caffeine consumption beyond limits can result in lot of physiological complications in human beings. In this work, we report a novel detection scheme for caffeine integrating nanohybrid membranes of reduced graphene oxide (rGO) in chitosan modified silica sol gel (rGO: chitosan: silica sol gel) with fiber optic surface plasmon resonance. The chemically synthesized nanohybrid membrane forming the sensing route has been dip coated over silver coated unclad central portion of an optical fiber. The sensor works on the mechanism of modification of dielectric function of sensing layer on exposure to analyte solution which is manifested in terms of red shift in resonance wavelength. The concentration of rGO in polymer network of chitosan and silica sol gel and dipping time of the silver coated probe in the solution of nanohybrid membrane have been optimized to extricate the supreme performance of the sensor. The optimized sensing probe possesses a reasonably good sensitivity and follows an exponentially declining trend within the entire investigating range of caffeine concentration. The sensor boasts of an unparalleled limit of detection value of 1.994 nM and works well in concentration range of 0-500 nM with a response time of 16 s. The impeccable sensor methodology adopted in this work combining fiber optic SPR with nanotechnology furnishes a novel perspective for caffeine determination in commercial foodstuffs and biological fluids.