Chemical interaction mechanism of 10-MDP with zirconia

Different surface treatments and adhesive monomers for zirconia-resin bonds: A systematic review and network meta-analysis

This review examined the efficacy of surface treatments and adhesive monomers for enhancing zirconia-resin bond strength. A comprehensive literature search in PubMed, Embase, Web of Science, Scopus, and the Cochrane Library yielded relevant in vitro studies. Employing pairwise and Bayesian network meta-analyses, 77 articles meeting inclusion criteria were analyzed. Gas plasma was found to be ineffective, while treatments including air abrasion, silica coating, laser, selective infiltration etching, hot etching showed varied effectiveness. Air abrasion with finer particles (25-53 µm) showed higher immediate bond strength than larger particles (110-150 µm), with no significant difference post-aging. The Rocatec silica coating system outperformed the CoJet system in both immediate and long-term bond strength. Adhesives containing 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP) were superior to other acidic monomers. The application of 2-hydroxyethyl methacrylate and silane did not improve bonding performance. Notably, 91.2 % of bonds weakened after aging, but this effect was less pronounced with air abrasion or silica coating. The findings highlight the effectiveness of air abrasion, silica coating, selective infiltration etching, hot etching, and laser treatment in improving bond strength, with 10-MDP in bonding agents enhancing zirconia bonding efficacy.

Comparison of the Shear Bond Strength Using Primers with Different Application Numbers on Dental Zirconia

OBJECTIVE

 This study examined the effect of the number of phosphate-containing primer applications on the shear bond strength (SBS) of zirconia to resin cement.

MATERIALS AND METHODS

 315 square specimens (10 × 10 × 4 mm3) were manufactured from Cercon ht presintered zirconia blocks. Alumina particles were used to sandblast zirconia specimens. These specimens were randomly divided into six primer-based groups: No primer application (NP), CLEARFIL CERAMIC PRIMER (C), PANAVIA V5 Tooth Primer (T), M&C PRIMER (MC), Monobond N (MN), and Z-PRIME plus (Z), and then separated into application number (1-4) groups (excluding NP). Each specimen was bonded with resin cement. The SBS was measured using a universal testing machine. The debonded surface was examined with a stereomicroscope.

STATISTICAL ANALYSIS

 The SBSs were analyzed using two-way analysis of variance.

RESULTS

 Applying the primer twice exhibited the highest SBSs in each group, with significant differences in the T, MN, and Z groups. However, the SBS in the MC group was significantly lower on the second application. One-hundred percent adhesive failure was observed in all groups.

CONCLUSION

 Within the limitations of this study, prior to cementation, the sandblasted zirconia surface should be applied twice with a phosphate-containing primer other than MC to maximize the SBS at the zirconia-resin cement interface.

Effect of Instrument Lubricant on Mechanical Properties of Restorative Composite

OBJECTIVES

Using a wetting resin or adhesive system as an instrument lubricant when placing composite layers is commonly practiced to improve handling. This study investigated whether instrument lubricants affected strength, stiffness, or hardness.

METHODS

Composite beams (TPH Spectra) were fabricated using a stainless steel mold (25×2.5×2 mm) in two steps, where the second half (12.5 mm) was added and cured against a cured first half (n=15). The composite surface at the open end of the first half was smoothed using an instrument lubricated with wetting resin (Ultradent) or universal adhesive (ScotchBond Universal), enough to prevent sticking, or without lubrication. An additional beam of each group was characterized using scanning electron microscopy. Monolithic specimens were also fabricated. After 24 hour storage (37°C, 100% humidity), the beams' flexural strength and stiffness were determined by four-point bending. Vickers surface hardness was measured on 24-hour composite samples in 2 mm deep acrylic cavities, cured after the surface was smoothed with the two instrument lubricants or no lubricant (n=10). Hardness was remeasured after finishing with a series of contouring and polishing discs. Data were statistically analyzed using ANOVA followed by Student-Newman-Keuls post hoc test at 0.05 significance level.

RESULTS

There were significant differences (p<0.001) in flexural strength and stiffness among groups. While strength and stiffness were not affected by using a wetting resin as instrument lubricant, use of a universal adhesive increased strength and stiffness significantly, achieving monolithic values. Scanning electron micrographs showed less porosities at the interface when using instrument lubricants. Surface hardness was significantly reduced in groups in which instrument lubricants were used, but finishing/polishing restored original hardness (p<0.001).

CONCLUSIONS

Lubricating an instrument with a wetting agent did not adversely affect physical or surface properties, provided the surface was finished and polished. If a universal adhesive was used as lubricant, the strength and stiffness of a layered composite could be increased, reaching monolithic values.

Bond Strength of Milled and Printed Zirconia to 10-Methacryloyloxydecyl Dihydrogen Phosphate (10-MDP) Resin Cement as a Function of Ceramic Conditioning, Disinfection and Ageing

This study aimed to assess the suitability of printed zirconia (ZrO2) for adhesive cementation compared to milled ZrO2. Surface conditioning protocols and disinfection effects on bond strength were also investigated. ZrO2 discs (n = 14/group) underwent either alumina (Al2O3) airborne particle abrasion (APA; 50 µm, 0.10 MPa) or tribochemical silicatisation (TSC; 110 µm Al2O3, 0.28 MPa and 110 µm silica-modified Al2O3, 0.28 MPa), followed by disinfection (1 min immersion in 70% isopropanol, 15 s water spray, 10 s drying with oil-free air) for half of the discs. A resin cement containing 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP) was used for bonding (for TSC specimens after application of a primer containing silane and 10-MDP). Tensile bond strength was measured after storage for 24 h at 100% relative humidity or after 30 days in water, including 7500 thermocycles. Surface conditioning significantly affected bond strength, with higher values for TSC specimens. Ageing and the interaction of conditioning, disinfection and ageing also impacted bond strength. Disinfection combined with APA mitigated ageing-related bond strength decrease but exacerbated it for TSC specimens. Despite these effects, high bond strengths were maintained even after disinfection and ageing. Adhesive cementation of printed ZrO2 restorations exhibited comparable bond strengths to milled ZrO2, highlighting its feasibility in clinical applications.

Influence of Varied Silane Commercial Brands and Adhesive Application on Bond Strength and Stability to Lithium Disilicate Glass Ceramic

OBJECTIVES

This study aimed to evaluate the impact of various commercial silane brands with varied chemical compositions with or without the application of an adhesive layer on the microshear bond strength and durability of a resin luting agent to lithium disilicate glass ceramic.

METHODS AND MATERIALS

Lithium disilicate glass ceramic discs (EMX, IPS e.max Press, Ivoclar Vivadent) measuring 10 mm in diameter and 3 mm in thickness were fabricated (n=240). Surfaces were etched using 5% hydrofluoric acid and randomly assigned to 10 groups based on the commercial brand of silane used (n=24): [RP] RelyX Ceramic Primer (3M ESPE); [PS] Prosil (FGM); [SA] Silano (Angelus); [SM] Silano (Maquira); [SU] Silane (Ultradent); [GL] GLUMA Ceramic Primer (Kulzer); [CB] Ceramic Bond (VOCO); [MB] Monobond N (Ivoclar Vivadent); [CP] Clearfil Ceramic Primer (Kuraray); and [DE] 2-step silane (Dentsply Sirona). Half of the EMXs (n=12) received a thin adhesive layer (+) after the silane and prior to resin luting agent, while the other half (n=12) did not receive an adhesive layer (-). For the microshear bond strength test (μSBS), four light-cured resin luting agent cylinders (1 mm in diameter) were created on each EMX surface. Half of these specimens were tested after 24 hours, while the other half were stored in deionized water for 6 months. The μSBS test was conducted using a universal testing machine (DL 500, EMIC) at a crosshead speed of 1 mm/min until failure. The obtained data underwent statistical analysis using analysis of variance (ANOVA) and the Tukey test (α=0.05).

RESULTS

There was significant influence of the silane commercial brand on bond strength. Notably, "universal primers" yielded lower bond strength results compared to "pure" silane solutions. Water storage had a detrimental effect on microshear bond strength for certain silane commercial brands. Additionally, the application of an adhesive layer negatively impacted bond strength results for all silanes.

CONCLUSIONS

This study confirms the importance of both silane commercial brand and chemical composition in relation to bond strength of resin luting agents to lithium disilicate glass ceramic. Furthermore, the application of an adhesive layer may have an adverse effect on bond stability over time.

Effect of Different Primers on Shear Bond Strength of Base Metal Alloys and Zirconia Frameworks

Ensuring a secure bond between a framework structure and layering composite resin veneer is essential for a long-lasting dental restoration. A variety of primer systems are available to facilitate the adhesive bonding. Nevertheless, the growing preference for efficiency and simplicity in dentistry has made the one-bottle universal primers a desirable option. This study aims to compare the effectiveness of universal primers on the shear bond strength (SBS) of base metal alloy (BMA) and zirconia to layering composite resin. Each 160 BMA and zirconia 20 × 10 × 5 mm test specimen was fabricated. Eight different primers (SunCera Metal Primer, Metal Primer Z, Reliance Metal Primer, Alloy Primer, MKZ Primer, Monobond Plus, ArtPrime Plus, and Clearfil Ceramic Primer Plus) were applied to 20 specimens in each group. Subsequently, a 5 × 2 mm composite resin build-up was applied. SBS tests were performed after 24 h of water storage and after thermocycling (25,000 cycles, 5-55 °C). On BMA, after water storage for 24 h, the bond strength values ranged from 26.53 ± 3.28 MPa (Metal Primer Z) to 29.72 ± 2.00 MPa (MKZ Primer), while after thermocycling, bond strength values ranged from 25.19 ± 1.73 MPa (MKZ Primer) to 27.69 ± 2.37 MPa (Clearfil Ceramic Primer Plus). On a zirconia base, after 24 h, the bond strengths values ranged from 22.63 ± 2.28 MPa (Reliance Primer) to 29.96 ± 2.37 MPa (MKZ Primer) and from 23.77 ± 3.86 MPa (Metal Primer Z) to 28.88 ± 3.09 MPa (Monobond Plus) after thermocycling. While no significant difference in bond strength was found between the primers on the BMA base, five primer combinations differed significantly from each other on zirconia (p = 0.002-0.043). All primers achieved a bond strength greater than 23 MPa on both framework materials after thermocycling. Thus, all primers tested can be applied to both framework materials with comparable results.

Shear bond strength between standard or modified zirconia surfaces and two resin cements incorporating or not 10-MDP in their matrix

OBJECTIVE

This study aimed first to compare the shear bond strength between zirconia samples luted to enamel with a 10-MDP- containing resin cement (Panavia F2.0, Kuraray, Japan) and those luted with a resin cement using a separated 10-MDP monomer-containing bottle (Panavia V5, Kuraray, Japan). The second objective was to evaluate the bond stability after 150 days of aging in water, between enamel and zirconia ceramic surface enhanced with a glass-ceramic coating.

MATERIALS AND METHODS

80 specimens composed of ceramic cylinders and enamel disks were obtained, within eight experimental groups (n = 10). 60 zirconia cylinders (Katana STML zirconia, Kuraray, Japan) were assigned to 3 groups according to their surface treatment: milled/sintered surface (ZRCT), tribochemical silica-coating (Cojet™ Sand, 3 M ESPE, Seefeld, Germany) (ZRTC), and glass-ceramic coating (IPS e.max Zirpress) (ZRZP). 20 cylinders of lithium disilicate had a milled surface (IPS e.max CAD, Ivoclar-Vivadent, Schaan, Liechtenstein) (ECAD). The cylinders of each group were further divided into two subgroups according to the resin cement used: Panavia F2.0 (-PF) and Panavia V5 (-PV). All specimens were stored in distilled water for 150 days before shear bond strength (SBS) tests. The fracture mode was analyzed, and data were statistically computed (two-way ANOVA, post hoc Tukey test, p < 0.05, SPSS, IBM, v26).

RESULTS

The ECAD-PF group recorded the highest SBS values (31.75 ± 2.2), and the ZRCT-PF group recorded the lowest values (5.59 ± 1.1). The two-way ANOVA test showed that ceramic surface treatment had a statistically significant effect on SBS (F (3,72) = 38.95, p < 0.001) while the type of ARC did not (F (1,72) = 2.40, p = 0.126). Tukey's post hoc test revealed no statistical difference between the ZRZP and the ZRTC or ECAD groups.

CONCLUSION

Within the limitations of this study, the PV resin achieved similar shear bond strength results between tribocoated zirconia and enamel compared to the one for glass-ceramic and enamel. Furthermore, a long-term durable bond, similar to the glass-ceramic one, was achieved with the heat pressed ceramic coated specimens. Thus, this new surface treatment could be recommended for anterior cantilever bridges for its fracture resistance and bonding ability.

Development of zirconia-based polymer-infiltrated ceramic network for dental restorative material

Polymer-infiltrated ceramic network (PICN) materials have gained considerable attention as tooth restorative materials owing to their mechanical compatibility with human teeth. However, the mechanical strength of contemporary PICN materials is lower than those of conventional resin composites and ceramics. This study aims to develop novel high-strength PICN for use as a dental restorative material. Zirconia-based PICN (EXP) was fabricated using 3 mol% yttria tetragonal polycrystalline zirconia powder and resin monomers via slip casting, followed by sintering and polymer infiltration. Comprehensive analyses of the microstructure, mechanical properties, and physicochemical properties of EXP were performed using scanning electron microscopy with energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, inorganic content measurements, three-point bending test, Vickers hardness test, two-body wear test, shear bond strength (SBS) test, surface free energy analysis, and water sorption/solubility test. Commercially available computer-aided design/computer-aided manufacturing (CAD/CAM) materials, including resin composite (CERASMART), silicate-based PICN (ENAMIC), and zirconia ceramic (e.max ZirCAD), were used for comparison. The analyses highlight the dual network structure of EXP, which comprised a zirconia skeleton and an infiltrated resin phase. EXP exhibits a flexural strength of 346.0 ± 46.0 MPa, flexural modulus of 44.0 ± 3.7 GPa, and Vickers hardness of 440.1 ± 51.2 VHN. The mechanical properties of EXP are significantly higher than those of CERASMART and ENAMIC but lower than those of ZirCAD. Notably, the EXP hardness closely mimics that of the human enamel. The wear volume, SBS, and water sorption/solubility of EXP are comparable to those of CERASMART and ENAMIC. Therefore, EXP has potential applications as a tooth restorative material.

Comparison of bond strength of self-adhesive and self-etch or total-etch resin cement to zirconia: A systematic review and meta-analysis

The aim of this study was to systematically compare the bond strength of self-adhesive and self-etch or total-etch resin cement to zirconia. The PubMed, ISI (all), and Scopus databases were searched for the selected keywords up to November 1, 2021, without date or language restrictions. In vitro studies comparing the bond strength of self-adhesive and self-etch or total-etch resin cement to zirconia were eligible for inclusion in the study. The selected articles were divided into four groups based on the type of resin cement and the storage time. Statistical analysis was performed using the Biostat Comprehensive Meta-Analysis Software version 2 (α = 0.05). The effect of conventional cement ( Glass Ionomer (GI), Resin Modified Glass Ionomer (RMGI) and zinc phosphate) was analyzed using descriptive analysis. The initial search yielded 376 articles, of which 26 were selected after a methodological assessment. Two reviewers independently extracted data and assessed the risk of bias. The results showed that the immediate or delay bond strength of the self-adhesive resin cement to zirconia has no significant difference with the bond strength of self-etch resin cement to zirconia. The immediate and delay bond strength of total-etch cement-zirconia was significantly lower than that of self-adhesive cement-zirconia (P = 0.00). A descriptive analysis of the selected articles showed that the bond strength of self-adhesive resin cement to zirconia was significantly higher than total-etch cement. The results of the meta-analysis showed that both self-adhesive and self-etch resin cement (if applied according to their manufacturer's instruction) are suitable for bonding to zirconia.

Cyclic fatigue of a repaired 4 YSZ ceramic: Effect of the repair protocol on the adhesive and mechanical behavior

Objective

To evaluate the effect of different surface treatments on the morphology, shear bond, and flexural fatigue strength of a repaired translucent zirconia.

Methods

Monolithic disc-shaped specimens of translucent zirconia were prepared and ground to simulate repair areas. Four groups underwent different treatments: Air-MDP (air-abrasion with alumina particles and 10-MDP primer), Si-Sil (silica-coated alumina particles with MDP-containing silane), Si-MDP (silica coating with 10-MDP primer), and Uni adhe (universal adhesive). After roughness measurements and treatments, repairs were done using resin composite. Shear bond and flexural (n = 15) fatigue tests were performed. Surface topography, interfacial analysis, fractographic, and finite element analysis were conducted.

Results

The zirconia roughness was similar between the groups, however, the surface topography was modified according to the surface treatments. Si-Sil generated higher and more stable bond strength values (20.69 MPa) between translucent zirconia and resin composite when compared to Uni adhe (15.75 MPa) considering the fatigue bond strength scenario, while it was similar to Si-MDP (17.70 MPa) and Air-MDP (18.97 MPa). Regarding the mechanical behavior, Si-Sil (680.83 MPa) also showed higher and significantly different fatigue strength when compared to Uni adhe (584.55 MPa), while both were similar to Si-MDP (634.22 MPa) and Air-MDP (641.86 MPa).

Conclusion

The association of mechanical and chemical approaches is essential for long-term bond strength and optimized mechanical behavior, being air-abrasion protocols and the use of silane and/or MDP-based primers suitable for zirconia repair protocols. It was found that relying solely on a universal adhesive was not as effective as other options available.

Clinical significance

The surface treatment of repair protocols affects translucent zirconia's morphology. To enhance fatigue behavior in repaired monolithic zirconia, air abrasion is crucial. Exclusive use of a universal adhesive is less effective than other choices. A primer containing silane/MDP holds the potential for stable bond strength and optimized mechanical performance.

The possibility of clinical bonding between metal/ceramic brackets to zirconia: in vitro study

Objective: The present study aimed to assess the bond strength and durability of six bonding agents concerning their application to metal or ceramic brackets and zirconia. Materials and Methods: Six resin cement bonding agents (XT, XTS, RSBU, RGBU, SBPM, and GMP) were chosen for this investigation. Specimens were either stored in distilled water at 37°C for 24 h or subjected to 5,000 thermocycles before conducting a Shear Bond Strength (SBS) test. Statistical analysis of the SBS data was performed using three-way ANOVA and Games-Howell tests (α = 0.05). The Adhesive Remnant Index was examined, and the debonding surface details on brackets and zirconia were observed. Results: For metal brackets, all groups demonstrated clinically acceptable bond strength, irrespective of storage conditions, except for the XT group. Regarding ceramic brackets, all groups displayed acceptable bond strength after 24 h of water storage. However, following thermocycling, a significant decrease in SBS was noted across all groups (p < 0.05), with SBPM exhibiting a higher bond strength. Three-way ANOVA analysis indicated that SBS values were notably influenced by each factor, and an interaction among the three independent variables was observed (p = 0.000). Conclusion: The reliable bond strength between ceramic brackets and zirconia was significantly lower after thermocycling compared to that of metal brackets and zirconia. SBPM exhibited consistent and robust bond strength between ceramic/metal brackets and zirconia across various storage conditions. Furthermore, the HEMA-free adhesive demonstrated a potentially more consistent bonding performance compared to the HEMA-containing adhesive employed in this study.

Zirconia bond strength durability following artificial aging: A systematic review and meta-analysis of in vitro studies

The present study systematically reviewed the literature regarding the bond strength durability of zirconia ceramics to resin-based luting cements after application of different bonding protocols and aging conditions. Electronic searches in PubMed, Scopus, and Web of Science databases were performed for relevant literature published between January 1st 2015 and November 15th 2022. Ninety-three (93) English language in-vitro studies were included. The percentage of the mean bond strength change was recorded prior to and after artificial aging, and the weighted mean values and 95% confidence intervals were calculated. Bonding protocols were classified based on the combination of MDP/non-MDP containing cement/primer and surface pretreatment, as well as the level of artificial aging performed. Alumina sandblasting (SA) was identified as the most frequently used surface pre-treatment while an insufficient number of studies was identified for each category of alternative surface treatments. The combination of MDP cement with tribochemical silica coating (TSC) or SA yielded more durable results after aging, while the application of SA and TSC improved bond durability when a non-MDP cement and a non-MDP primer were used. TSC may lead to increased bond durability compared to SA, whereas MDP cements may act similarly when combined with SA or TSC.

MDP-salts as an adhesion promoter with MDP-primers and self-adhesive resin cement for zirconia cementation

PURPOSE

To evaluate the effect of zirconia priming with MDP-Salt before MDP containing primers and self-adhesive cement on the shear bond strength.

MATERIALS AND METHODS

Fully sintered high translucent zirconia specimens (n = 120) were assigned into 2 groups (n = 60 each): Control (No Pretreatment) and Methacryloyloxydecyl dihydrogen phosphate salt (MDP-Salt) pretreated. Each group was divided into 3 subgroups (n = 20) according to cementation protocol: 1) MDP + Silane primer and conventional resin cement, 2) MDP+ Bisphenyl dimethacrylate (BPDM) primer and conventional resin cement, and 3) MDP containing self-adhesive resin cement. Shear bond strength (SBS) was measured after 10,000 thermocycling. Contact angle was measured for tested groups. Surface topography was assessed using a 3D confocal laser scanning microscope (CLSM). Weibull analysis was performed for SBS and one-way ANOVA for contact angle and surface topography measurements (α = 0.05).

RESULTS

The use of MDP-Salt significantly improved the SBS (p < .05) for all tested subgroups. Self-adhesive cement showed an insignificant difference with MDP + Silane group for both groups (p > .05). MDP + BPDM showed a significantly lower characteristic strength compared to self-adhesive resin cement when both were pretreated with MDP-Salt. No difference between all tested groups in the surface topographic measurements while MDP-Salt showed the highest contact angle.

CONCLUSION

MDP-Salt pretreatment can improve bonding performance between zirconia and MDP containing products.

Alumina and glass-bead blasting effect on bond strength of zirconia using 10-methacryloyloxydecyl dihydrogen phosphate (MDP) containing self-adhesive resin cement and primers

In fact, bonding of zirconia restorations is still a big challenge in clinical situations and many bonding protocols discussed in literature might be still controversial. The aim of this was to study assess the bond strength of zirconia after alumina and glass-bead pre-treatments with two different primers in combination with conventional resin cement and 10-methacryloyloxydecyl dihydrogen phosphate (MDP) containing self-adhesive resin cement without priming. Fully sintered high translucent zirconia samples (n = 160) were assigned into 2 groups of pre-treatments (n  = 80): Alumina-sandblasting (AB) and Glass-bead (GB). Then, each group was divided into 4 sub-groups according to priming and cement used (n  = 20 each): conventional self-adhesive resin cement, MDP-silane Primer, MDP primer both with conventional self-adhesive resin cement, and MDP contained cement. Shear bond strength (SBS) was measured after thermocycling. Failure mode was analyzed using stereomicroscope. Contact angle and surface topography were investigated using other fully sintered samples (n  = 30) constructed for that sole purpose, divided into control (no pre-treatment [unmodified], alumina-, and glass-bead sandblasted groups). Two-way ANOVA was performed for SBS and failure mode was analyzed. The use of Alumina-sandblasting showed higher SBS compared to Glass-bead pre-treatment for MDP-silane primer (p = 0.034) and MDP primer (p < 0.001). While MDP contained cement showed higher but insignificant SBS when pre-treated with glass-beads. Alumina-sandblasting and glass-bead pre-treatments improve bond strength of zirconia combined using primers before cementation with conventional resin cement. Also, self-adhesive MDP contained cement along with surface pre-treatment showed the highest achievable bond strength. It was concluded that both alumina-sandblasting and glass-bead blasting improved SBS combined with MDP containing self-adhesive resin cement reducing the required clinical steps during cementation of zirconia restorations.

Effect of surface topography and wettability on shear bond strength of Y-TZP ceramic

Zirconia ceramics have been widely used as dental restorations due to their esthetic appearance and high flexural strength. The bonding of zirconia with resin cement should rely on both mechanical and chemical bonds. This study was performed to investigate the effect of zirconia surface topography and its wettability after surface pretreatments on the microshear bond strength (μSBS) of a resin cement. Zirconia slabs were prepared and randomly divided into 5 groups based on the surface treatment as follows: no treatment (control), air abrasion (AB), etching with hydrofluoric acid (F), the mixture of hydrofluoric acid and nitric acid (FN), or the mixture of hydrochloric acid and nitric acid (CN) for 10 min. The specimens were subjected to investigation of surface roughness characteristics [average roughness (Ra), peak-to-valley average distance (Rpv), skewness (Rsk), and kurtosis (Rku)] using atomic force microscopy (AFM) and measurements of surface contact angle (θc) and μSBS of a resin cement. In addition, the area % of the nanoscale surface irregularity (nSI%) was calculated from the AFM images. The effects of nSI%, Ra and θc on the μSBS were analyzed by multiple linear regression analysis (p < 0.05). Multiple regression analysis revealed that the nSI% was the most predominant factor for the μSBS (p < 0.001). A surface with larger nSI%, higher Ra and relatively lower θc was essential for establishing a reliable resin-zirconia bond.

Shear Bond Strength of Adhesives Placed following Selective Removal of Red-Fluorescing Carious Dentine in vitro

Red-fluorescing dentine indicates bacterial contamination [Caries Res 2002; 36: 315-319]. We investigated effect of removal of red fluorescent dentine caries on shear bond strength and fracture mode of 4 adhesive approaches. Sixty-five carious teeth and 50 noncarious controls were distributed into 4 groups: Clearfil™ self-etch (CSE), OptiBond™ FL total etch (OTE), Scotchbond™ Universal total etch (STE) and self-etch (SSE). Samples were excited at 405 nm and viewed through 530 nm filter. Carious samples were ground flat exposing strongly red-fluorescing (StrongRF) dentine, on which a composite cylinder was placed, using one of 4 adhesives. After 22 h in water, shear bond strength and fracture mode were analysed. StrongRF was removed; composite cylinders were placed on weakly red-fluorescing (WeakRF) dentine and tested as described above. Finally, red-fluorescing dentine was removed, and composite cylinders were placed on non-fluorescing (NonRF) dentine and tested. Composites were placed at 3 corresponding heights in controls. After 22 h in water, shear bond strength testing and fracture mode analysis were performed. Differences were tested using Mann-Whitney or Wilcoxon tests (p ≤0.05). Median (Q1, Q3) shear bond strength on StrongRF was SSE 14.4 (9.2, 18.2) MPa >CSE 10.2 (6.4, 17.3) MPa >STE 9.1 (6.9, 11.2) MPa >OTE 6.8 (4.0, 10.8) MPa. Shear bond strength increased statistically significantly for all adhesives on WeakRF: SSE 19.8 (13.6, 24.3) MPa >STE 19.5 (12.7, 23.1) MPa >CSE 17.5 (12.0, 22.5) MPa >OTE 15.8 (11.9, 20.9) MPa. Only STE 25.6 (22.4, 29.1) MPa and CSE 22.1 (17.6, 24.6) MPa were significantly different on NonRF compared to WeakRF. For controls tested at corresponding depths, superficial shear bond strength was OTE 18.7 (16.0, 22.1) MPa >STE 18.4 (12.0, 25.9) MPa >CSE 18.1 (12.7, 20.7) MPa >SSE 13.0 (9.6, 17.8) MPa. This was significantly higher compared to StrongRF except for SSE. Central shear bond strength was not significantly different to WeakRF, deep shear bond strength was significantly lower for SSE and CSE but higher for OTE compared to carious. Conclusion: StrongRF dentine should be removed for higher shear bond strength, but WeakRF dentine can often be preserved without compromising adhesive bond strength.

In vitro comparative study between adhesion forces obtained on zirconia ceramic micromechanically treated with femtosecond laser (1027 nm), carbon dioxide laser (10,600 nm), and aluminum-oxide particles

Conventional surface roughening treatments used for silica-based ceramics in order to improve subsequent adhesion become unreliable for zirconia ceramics. Laser conditioning can be a good alternative. The purpose of this in vitro study was to compare conventional (macro) shear bond strength (SBS) values obtained between resin composite and zirconium oxide ceramic samples grouped according to different micromechanical treatments received, and examine differences in surface roughness. One-hundred and fifty disks of sintered zirconia were randomly divided into 5 groups and roughened as follows: (1) Group NOT, no surface treatment; (2) Group APA, abraded with 50-μm aluminum-oxide (Al2O3) particles; (3) Group TBS, abraded with 30-μm aluminum-oxide particles covered with silica; (4) Group CO2, irradiated with a CO2 laser which emitted in continuous wave mode at 3 W of power; and (5) Group FEM, irradiated with a pulsed femtosecond laser, with an incident energy of 10 μJ, a frequency of 1000 Hz, and a fluence of 1.3 kJ/cm2. All surfaces were treated with a MDP-containing adhesive/silane coupling agent mixture upon which were prepared and light polymerized composite resin cylinders. Shear bond strength was measured and samples were observed by scanning electron microscopy (SEM). Statistically significant differences (p < 0.05) were found among all groups, except between CO2 and FEM, which showed the highest adhesion values (15.12 ± 2.35 MPa and 16.03 ± 2.73 MPa). SEM revealed differences in surface patterns. CO2 laser irradiation can be an alternative to sandblasting, although it could also weaken the ceramic. Suitable surface patterns on zirconia ceramics can be obtained with ultrashort pulsed radiation emitted by a pulsed femtosecond laser.

The Shear Bond Strength of Resin-Based Luting Cement to Zirconia Ceramics after Different Surface Treatments

Due to its unique properties, zirconia is increasingly being used in dentistry, but surface preparation for bonding is difficult because of its polycrystalline structure. This study aimed to determine the effect of a new etching technique (Zircos-E) on Ceramill Zi (Amann Girrbach). The effect of etching and the use of primers (Monobond Plus and MKZ Primer) on the bond strength of zirconia with resin cement (NX3) was assessed. Shear bond strength was evaluated after storage in water for 24 h and after thermal aging (5000 thermocycling at 5 °C/55 °C). A scanning electron microscope (Hitachi S-4700) was used to evaluate the surface structure before and after the Zircos-E system. The roughness parameters were assessed using an SJ-410 profilometer. The etched zirconia surface is more homogeneous over the entire surface, but some localized forms of erosion exist. The etching of zirconia ceramics caused changes in the surface structure of zirconia and a significant increase in the shear bond strength between zirconia and resin cement. The use of primers positively affects the adhesion between resin cement and zirconia. Aging with thermocycler significantly reduced the shear bond strength, with one exception-sandblasted samples with MKZ Primer. Standard ceramic surface preparation, involving only alumina sandblasting, does not provide a satisfactory bond. The use of etching with the Zircos-E system and primers had a positive effect on the strength of the zirconium-resin cement connection.

Comparative Evaluation of the Repair Bond Strength of Dental Resin Composite after Sodium Bicarbonate or Aluminum Oxide Air-Abrasion

The dental prophylactic cleaning of a damaged resin-based composite (RBC) restoration with sodium bicarbonate can change the surface characteristics and influence the repair bond strength. The purpose of this study was to compare the effect of sodium bicarbonate (SB) and aluminum oxide (AO) surface treatments on the microtensile bond strength (µTBS) of repaired, aged RBC. Bar specimens were prepared from microhybrid RBC and aged in deionized water for 8 weeks. Different surface treatments (AO air-abrasion; SB air-polishing), as well as cleaning (phosphoric acid, PA; ethylene-diamine-tetraacetic-acid, EDTA) and adhesive applications (single bottle etch-and-rinse, ER; universal adhesive, UA), were used prior to the application of the repair RBC. Not aged and aged but not surface treated RBCs were used as positive and negative controls, respectively. The repaired blocks were cut into sticks using a precision grinding machine. The specimens were tested for tensile fracture and the µTBS values were calculated. Surface characteristics were assessed using scanning electron microscopy. AO-PA-UA (62.6 MPa) showed a 20% increase in µTBS compared to the NC (50.2 MPa), which proved to be the most significant. This was followed by SB-EDTA-UA (58.9 MPa) with an increase of 15%. In addition to AO-PA-UA, SB-EDTA-UA could also be a viable alternative in the RBC repair protocol.

Interaction of different concentrations of 10-MDP and GPDM on the zirconia bonding

OBJECTIVES

To analyze the influence of different concentrations of 10-MDP and GPDM used, combined or not, on the bonding to zirconia.

METHODS

Specimens of zirconia and a resin-composite (7 mm length, 1 mm width, and 1 mm thick) were obtained. The experimental groups were obtained according to the functional monomer (10-MDP and GPDM) and the concentrations (3 %, 5 %, and 8 %). For the groups with combined 10-MDP and GPDM, the agents were used with a proportion of 50 %/50 % wt until reaching the 3 %, 5 % and 8 % concentrations. All monomers were diluted in ethanol to obtain the primers. Two control groups were established: ethanol (negative control) and a commercial reference Monobond N (positive control). The zirconia surface treatment was performed with the primer application followed by the bonding to a resin-composite sample with a light-curing resin cement. Twenty-four hours after the adhesive procedure, a microtensile test was performed and the failure pattern of each sample was analysed with a stereoscopic magnifying glass. Data were analysed by a two-way ANOVA and Dunnet test.

RESULTS

All experimental primers presented a higher bond strength than the negative control (ethanol). Excepting the 8 % GPDM primer, all groups presented statistically similar bond strength compared to the positive control, with a predominance of adhesive failure.

SIGNIFICANCE

10-MDP, GPDM, and the combination of both for the concentrations tested promote an effective chemical bonding to zirconia. However, using 10-MDP and GPDM in the same primer has no synergistic effect.

Improved charge-transfer resonance in graphene oxide/ZrO2 substrates for plasmonic-free SERS determination of methyl parathion

This work reports a sensitive SERS substrate based on graphene oxide (GO) and quantum-sized ZrO₂ nanoparticles (GO/ZrO₂) for label-free determination of the organophosphate pesticide methyl parathion (MP). The enhanced light-matter interactions and the consequent SERS effect in these substrates resulted from the effective charge transfer (CT) mechanism attributed to synergistic contributions of three main factors: i) the strong molecular adherence of the MP molecules and the ZrO₂ surface which allows the first layer-effect, ii) the relatively abundant surface defects in low dimensional ZrO₂ semiconductor NPs, which act as intermediate electronic states that reduce the large bandgap barrier, and iii) the hindered charge recombination derived from the transference of the photoinduced holes to the GO layer. This mechanism allowed an enhancement factor of 8.78 × 10⁴ for GO/ZrO₂-based substrates, which is more than 5-fold higher than the enhancement observed for platforms without GO. A detection limit of 0.12 μM was achieved with an outstanding repeatability (variation ≤4.5%) and a linear range up to 10 μM, which is sensitive enough to determine the maximal MP concentration permissible in drinking water according to international regulations. Furthermore, recovery rates between 97.4 and 102.1% were determined in irrigation water runoffs, strawberry and black tea extracts, demonstrating the reliability of the hybrid GO/ZrO₂ substrate for the organophosphate pesticides quantification in samples related to agri-food sectors and environmental monitoring.

Digital Workflow for Producing Hybrid Posts and Cores

A novel and straightforward digital workflow is described to aid clinicians in producing in-office hybrid posts and cores. The method is based on scanning and using the basic module of a computer-assisted design and computer-assisted manufacturing (CAD-CAM) software program for dental applications. The applicability of the technique in a digital workflow is the simplicity of in-office production of a hybrid post and core that can be delivered to the patient in the same day.

Acrylamide monomers in universal adhesives

OBJECTIVES

The mono-functional monomer 2-hydroxyethyl methacrylate (HEMA) is often added to universal adhesives (UAs) to improve surface wetting and prevent phase separation. Nevertheless, HEMA promotes water sorption and hydrolysis at adhesive interfaces, hereby affecting long-term bonding to dentin. This study investigated if two acrylamide monomers could replace HEMA in an UA formulation applied in etch-and-rinse (2E&R) and self-etch (1SE) bonding mode.

METHODS

Four experimental UAs were bonded to bur-cut dentin. In addition to 12 wt% 10-MDP, 25 wt% Bis-GMA and 10 wt% TEGDMA as common monomer composition, 20 %wt ethanol and 15 %wt water as solvent, and 3 wt% polymerization-related additives, the four formulations solely differed for either the acrylamide cross-linker monomer 'FAM-201' as TEGDMA alternative and HEMA replacement, the hydroxyethyl acrylamide monomer 'HEAA' as HEMA alternative, HEMA ('HEMA+'), or extra TEGDMA in a HEMA-free control ('HEMA-'), all added in a 15 wt% concentration. The split-tooth study design involved application in 2E&R mode on one tooth half versus 1SE mode on the corresponding half. Micro-tensile bond strength of half of the micro-specimens was measured upon 1-week distilled water storage ('immediate' 1w μTBS), with the other half measured after additional 6-month storage ('aged' 6 m μTBS). Statistics involved linear mixed-effects (LME) modelling (p < .05). Additionally, interfacial TEM characterization, thin-film (TF) XRD surface analysis, LogP determination, and a cytotoxicity assay were carried out.

RESULTS

FAM-201 revealed significantly higher μTBS than HEMA+ at 1w and 6 m when applied both in E&R and SE bonding modes. HEAA's μTBS was significantly lower than that of HEMA+ at 1w when applied in SE mode. TF-XRD and TEM revealed similar chemical and ultrastructural interfacial characterization, including stable 10-MDP_Ca salt nano-layering. FAM-201 was least cytotoxic and presented with an intermediary LogP, while HEAA presented with the highest LogP, indicating high hydrophilicity and water-sorption sensitivity.

SIGNIFICANCE

The acrylamide co-monomer FAM-201 could replace HEMA in an UA formulation, while HEAA not.

The use of the monolithic ceramic and direct monolithic composite in the aesthetic rehabilitation of tooth wear

Traditional cold layering composite techniques can have limitations in the aesthetic rehabilitation of advanced tooth wear, with potentially high maintenance/failure rates and compromised aesthetics. This article explores advances in materials and clinical techniques involving monolithic ceramics and direct monolithic composites. These restorations satisfy the most aesthetically demanding patient, providing good to excellent aesthetics and long-term predictability.

In Vitro Investigation of Material Combinations for Meso- and Suprastructures in a Biomimetic Approach to Restore One-Piece Zirconia Implants

The aim of this study was to find a suitable material combination to avoid cement excess in the marginal region of one-piece zirconia implant-supported restorations by means of a hybrid crown consisting of a meso- and a suprastructure. One-piece zirconia implants (n = 120) were embedded in epoxy resin. Microfilled resin composite mesostructures (n = 60), designed as caps, were bonded on the implant abutment with a primer only. A molar crown was constructed and cemented with a resin cement on top of the mesostructure as a suprastructure out of feldspar ceramic (n = 12), lithium-disilicate (n = 24), or zirconia (n = 24). Fracture load (n = 6) and retention force (n = 6) were measured immediately after storage in distilled water at 37 °C for 24 h, as well as after an additional exposure to artificial aging in a chewing simulator and simultaneous thermal cycling. For the measurement of the fracture load, monolithic crowns made of the employed restorative materials and identical in shape to the hybrid crowns served as controls (n = 6 each). Fracture load values for feldspar ceramic and lithium-disilicate hybrid crowns were slightly higher than those for the respective monolithic crowns at baseline and after aging, which was statistically significant only for feldspar crowns after aging. In contrast, fracture load values for zirconia monolithic crowns were higher than those for zirconia hybrid crowns, which was only statistically significant after aging. Artificial aging reduced the fracture load of feldspar and lithium-disilicate crowns both for hybrid and monolithic crowns. The effect was only statistically significant for lithium disilicate hybrid crowns. The fracture load for hybrid and monolithic zirconia crowns was increased by artificial aging without reaching statistical significance. The retention force of lithium-disilicate and zirconia hybrid crowns was not affected by artificial aging. Taking into account retention force and fracture load, lithium-disilicate hybrid crowns showed promising results.

Zirconia Nanoparticles as Reinforcing Agents for Contemporary Dental Luting Cements: Physicochemical Properties and Shear Bond Strength to Monolithic Zirconia

Nanofillers in resin materials can improve their mechanical and physicochemical properties. The present work investigated the effects of zirconia nanoparticles (NPs) as fillers in commercial dental luting cements. Two dual-cured self-adhesive composites and one resin modified glass ionomer (RMGI) luting cement were employed. Film thickness (FT), flexural strength (FS), water sorption (W_sp), and shear bond strength (SBS) to monolithic zirconia were evaluated according to ISO 16506:2017 and ISO 9917-2:2017, whereas polymerization progress was evaluated with FTIR. Photopolymerization resulted in double the values of DC%. The addition of 1% wt NPs does not significantly influence polymerization, however, greater amounts do not promote crosslinking. The sorption behavior and the mechanical performance of the composites were not affected, while the film thickness increased in all luting agents, within the acceptable limits. Thermocycling (TC) resulted in a deteriorating effect on all composites. The addition of NPs significantly improved the mechanical properties of the RMGI cement only, without negatively affecting the other cements. Adhesive primer increased the initial SBS significantly, however after TC, its application was only beneficial for RMGI. The MDP containing luting cement showed higher SBS compared to the RMGI and 4-META luting agents. Future commercial adhesives containing zirconia nanoparticles could provide cements with improved mechanical properties.

Effects of Particle Abrasion Media and Pressure on Flexural Strength and Bond Strength of Zirconia

OBJECTIVES

To compare the effects of particle abrasion medium and pressure on shear bond strength and biaxial flexural strength of three generations of zirconia (Lava Frame, Lava Plus, and Lava Esthetic) with the goal of optimizing the bond to zirconia.

METHODS

280 discs (14 mm diameter; 1 mm thickness) of each zirconia were milled and sintered. Specimens of each material were randomly distributed into 14 groups (n=20); half were tested for shear bond strength and half were tested for biaxial flexural strength. The specimens were particle abraded on one surface by 2 different media (50 μm alumina particles or 50 μm glass beads) for 10 seconds at three different pressures (15, 30, and 45 psi or 0.1, 0.2, 0.3 MPa). Untreated specimens served as positive control. A tube (1.50 mm diameter) filled with dual cured resin cement (Panavia SA) was placed onto the surface and light cured. Specimens were stored in water (37°C for 24 hours) and shear bond strength was measured in a universal testing machine (Instron). Biaxial flexural strength of each specimen was measured according to ISO 6872. Shear bond strength and biaxial flexural strength were compared individually with a 2-way analysis of variance (ANOVA) for factors surface treatment and zirconia composition.

RESULTS

Significant differences were seen between surface treatments (p<0.01), zirconia composition (p<0.01) and their interaction (p<0.01) for both bond strength and flexural strength. With alumina particle abrasion, higher pressure produced higher bonds for Lava Frame and Lava Plus zirconia while the bond of Lava Esthetic declined with increased pressure. Higher pressure (>0.2 MPa or 30 psi) with alumina decreased biaxial flexural strength with Lava Esthetic zirconia.

CONCLUSIONS

Particle abrasion with alumina produced a significantly better combination of bond strength while maintaining biaxial strength of three zirconia materials than particle abrasion with glass beads. The bond strength also depended upon the pressure of particle abrasion and the generation of zirconia used.

Effect of Fluorographene Addition on Mechanical and Adhesive Properties of a New Core Build-Up Composite

This study aims to develop a restorative material having such mechanical and adhesive properties that it can be used both as a reconstruction material and as a luting cement. The experimental core build-up composite (CBC) was derived from a self-adhesive cement by the modification of its chemical formula, requiring the use of dedicated dentin and ceramic primers. The adhesive properties to zirconia and dentin were analyzed with a micro-Shear Bond Strength test (mSBS). The mechanical properties were analyzed by a flexural strength test. The results were compared with those obtained for other commercially available cements and core build-up materials, both before and after addition of 2 wt.% fluorographene. The CBC obtained average values in the mSBS of 49.7 ± 4.74 MPa for zirconia and 32.2 ± 4.9 MPa for dentin, as well as values of 110.9 ± 9.3 MPa for flexural strength and 6170.8 ± 703.2 MPa for Young's modulus. The addition of fluorographene, while increasing the Young's modulus of the core build-up composite by 10%, did not improve the adhesive capabilities of the primers and cement on either zirconia or dentin. The CBC showed adhesive and mechanical properties adequate both for a restoration material and a luting cement. The addition of 2 wt.% fluorographene was shown to interfere with the polymerization reaction of the material, suggesting the need for further studies.

The Effect of Multiple Applications of Phosphate-Containing Primer on Shear Bond Strength between Zirconia and Resin Composite

Occasional chipping can still occur with zirconia material despite its high strength. Emergency repairs can be accomplished using zirconia primer, adhesive agent, and resin composite when the fracture of zirconia exposes the zirconia framework. Phosphate-containing primers play an important role in zirconia surface treatment. The objective of this investigation was to evaluate the effect of multiple applications of phosphate-containing primer on shear bond strength between zirconia and resin composite. In this case, 78 zirconia discs were sandblasted by alumina particles; the zirconia was then randomized into six groups for single application and multiple applications of phosphate-containing primer according follows; group 1: no application, group 2: one application, group 3: two applications, group 4: three applications, group 5: four applications, and group 6: five applications. Adhesive was applied on the zirconia surface and the resin composite was bonded. Shear bond strength was assessed using a universal testing machine. The de-bonded surface was examined using a stereomicroscope. The shear bond strengths were statistically analyzed with one-way ANOVA and Bonferroni. Group 1 had the lowest shear bond strength with a significant difference compared to groups 2–6, whereas group 4 had the highest shear bond strength, with no significant difference compared to groups 5–6. The failure mode revealed 100% adhesive failure in all groups. In conclusion, to maximize shear bond strength at zirconia and resin composite interfaces, sandblasted zirconia surfaces should be treated with three applications of phosphate-containing primer prior to the adhesive agent.

Silanizing Effectiveness on the Bond Strength of Aged Bulk-Fill Composite Repaired After Sandblasting or Bur Abrasion Treatments: An in vitro Study

Objective

To measure the repair shear bond strength (SBS) of an aged bulk-fill composite after different mechanical (diamond bur vs sandblasting) and chemical (universal adhesive with or without a previous silanization) surface treatments.

Materials and Methods

Bulk-fill composite (Filtek One Bulk Fill, 3M ESPE) was used to construct seventy-two specimens aged through 10,000 thermal cycles. The specimens were allocated into two groups (n = 36 each) according to the mechanical roughening: Db, treated with a diamond bur, and Sb, treated by sandblasting. Each group was further subdivided into three subgroups (n = 12 each) according to the chemical conditioning: Db-only and Sb-only, unconditioned specimens; Db-U and Sb-U, specimens were conditioned with silane-containing universal adhesive (Scotchbond Universal adhesive, 3M ESPE); and Db-S-U and Sb-S-U, specimens were conditioned with a silane agent (Prosil, FGM) before employing the universal adhesive. The same composite material was used for repair. An additional reference group was constructed to measure the cohesive strengths of the bulk-fill composite. SBS testing was performed using a universal testing machine at a crosshead speed of 1 mm/min, and the failure modes were evaluated by stereomicroscope. The surface topography of resin composite after roughening was assessed by scanning electron microscopy. SBS data were statistically analyzed by ANOVA, Tukey’s test and independent t-test.

Results

The significantly highest SBS was recorded in the reference group (P ≤ 0.05). Sb-only obtained significantly higher SBS than Db-only (P < 0.001). No significant difference in SBS was noted between Db-U and Sb-U or Db-S-U and Sb-S-U. Likewise, no significant difference was observed between the subgroups treated with or without silane (P > 0.05).

Conclusion

The sandblasted specimens demonstrated a higher repair SBS than the diamond bur-treated specimens. The use of an additional silanizing step before applying silane-containing universal adhesive did not enhance the SBS of the repaired composite.

Effect of Different Surface Treatments on Repair Bond Strength of CAD/CAM Resin-Matrix Ceramics

The purpose of this study was to investigate the influence of different surface treatment methods on the micro-tensile bond strength (μTBS) of resin-matrix ceramic (RMC) blocks repaired with resin composite. Three different prefabricated RMC blocks including Lava Ultimate (LU), Grandio Blocs (GB), and Shofu Block HC (HC) were thermo-cycled and divided into five surface treatment groups: Control (C), bur grinding (G), airborne particle abrasion (APA), Er,Cr:YSGG laser irritation (LI), and APA combined with LI (APA+LI). After surface treatments, topographic alterations were examined by scanning electron microscopy. Then, Universal Adhesive (Single Bond Universal) was applied and repair was simulated with nanohybrid composite (Grandio SO). Bonded specimens were cut into 1 mm2 sized beams (n = 16) and a μTBS test was conducted by using a universal test machine. Fracture types were evaluated by using a stereomicroscope. The bond- strength data was evaluated by two-way ANOVA and Tukey post-hoc test (α = 0.05). The μTBS values were significantly affected by the surface treatment variable and the interaction terms of the variables (p ≤ 0.001). However, no significant effect of RMC type was detected (p > 0.05). Among all materials, GBAPA+LI indicated the highest µTBS value. Except for the GBC, all surface treatments showed clinically acceptable bond-strength values. However, the surface treatments applied to GB and LU before the repair processes increased the repair bond-strength values while causing a negative effect for HC. In addition, LI and APA+LI can be applied as an alternative route compared to other procedures recommended by the manufacturer for surface preparation in intraoral RMC repair.

Shear bond strength of different bonding agents to orthodontic metal bracket and zirconia

This study aimed to evaluate the shear bond strength (SBS) of four bonding agents used to bond metal brackets to zirconia under different storage conditions. Four bonding agents were used [FLC: (Fuji ORTHO LC), XT: (Transbond^TM XT), RUC-SBU: (Rely X^TM Ultimate Clicker Adhesive Resin Cement+Single Bond Universal), and RUC-GBU: (Rely X^TM Ultimate Clicker Adhesive Resin Cement+Gluma Bond Universal)] to bond two types of metal brackets (PT/3M) to zirconia surfaces, and they were stored in water at 37ºC for 24 h or thermocycling for 3,000 cycles. The SBS data of RUC-SBU and RUC-GBU using PT brackets were significantly higher than those of 3M brackets before and after thermocycling. It could be concluded that RUC-SBU and RUC-GBU could offer sufficient bond strength between metal brackets and zirconia for the short term compared with FLC and XT. The design of brackets can significantly affect the bond strength to zirconia.

Enhancing Resin Cement Adhesion to Zirconia by Oxygen Plasma-Aided Silicatization

The combinations of alumina particle air abrasion (AA) and a 10-methacryloyloxyidecyl-dihyidrogenphosphate (MDP) primer and a tribochemical silica coating (TSC) and a silane-base primer are contemporary pre-cementation treatments for zirconia restorations for bonding with resin cements. However, the stability of zirconia resists the mechanical or chemical preparations. The purpose of this study was to develop an atmospheric-pressure oxygen plasma (OP)-aided silicatization method to enhance the adhesion of resin cements to zirconia. Zirconia discs were prepared to receive surface treatments of different combinations: (1) AA or TSC (2) with or without OP treatment, and (3) a chemical primer (no primer, silane, or a silane-MDP mixture). The surface morphology, hydrophilicity, and chemical compositions were characterized, and the resin-zirconia bond strengths were examined either after 24 h or a thermocycling test. The results indicated that the OP treatment after the TSC facilitated the homogeneous distribution of silane and crosslinking of silica particles, and effectively improved the hydrophilicity. The OP increased the O and Si and reduced the C elemental contents, while the combination of TSC, OP, and silane induced SiO_x generation. Among the groups, only the TSC-OP-silane treatment effectively enhanced the bond strength and maintained the adhesion after thermocycling. With these results, the OP aided the silicatization protocol effectively, generated silane crosslinking, and resulted in superior resin-zirconia bond strength and durability compared to the current treatments.

The Effect of a 10-MDP-Based Dentin Adhesive as Alternative for Bonding to Implant Abutment Materials

Bonding to different dental restorative materials is challenging. This study aimed to evaluate the effect of a 10-MDP-based dentin adhesive on the shear bond strength (SBS) of self-adhesive resin cement (RC) to implant abutment materials. One hundred and twenty specimens were obtained from zirconia (ZO), cobalt-chromium alloy (CoCr), and commercially pure titanium (Ti), which were treated as follows (n = 10): control group-non-treated (CG), 10-MDP-based dentin adhesive (SB), light-cured SB (SB-LC), and zirconia primer (ZP). Blocks of RC were buildup and, after 24 h, were tested for bond strength. Data of SBS (MPa) were submitted to two-way ANOVA and Tukey test (α = 0.05). There was no difference in SBS among materials for CG and ZP, higher SBS were recorded for Ti SB and Ti SB-LC compared to ZO upon the same surface treatments. For the comparisons among treatments, SB-LC showed the highest SBS for CoCr. For ZO and Ti, higher SBS were recorded with SB and SB-LC. No cohesive failures were observed. It was concluded that the surface treatment with 10-MDP-based materials increased the bond strength of the resin cement to abutment materials, which showed to be material dependent.

Effect of Different Cleaning Methods on Shear Bond Strength of Resin Cement to Contaminated Zirconia

The aim of this study was to evaluate the effect of different cleaning methods on the shear bond strength (SBS) of resin cement to contaminated zirconia specimens. Eighty rectangular-shaped specimens (2 × 5 × 10 mm) were fabricated from Zirconia blocks (IPS e.max ZirCAD) and randomly divided into 8 groups (n = 10). Group A (control) was not exposed to contaminants. The following tests specimens were contaminated with saliva and silicone indicating paste. Group B was coated with ceramic primer, then subjected to contamination. Groups C, D, E, F, G, and H were contaminated; cleaned with water rinse, Ivoclean, air particle abrasion, hydrofluoric acid, KATANA^TM Cleaner and ZirClean^TM, respectively, and then coated with ceramic primer and bonded to dual cure resin cement cylinders. All the specimens were subjected to artificial aging and surviving specimens were subjected to the SBS test. For statistical analysis, ANOVA and multiple comparison methods at the 0.05 significance level were used. There was no statistically significant difference among Ivoclean (21.48 ± 2.90 MPa), air particle abrasion (21.92 ± 2.85 MPa), and the control group (24.68 ± 5.46). The application of ceramic primer before contamination did not preserve the SBS of resin cement to zirconia. Cleaning the contaminated zirconia surface with hydrofluoric acid (15.03 ± 3.63) or KATANA^TM Cleaner (17.27 ± 7.63) did not restore SBS to the uncontaminated state, but it was significantly higher than simply rinsing with water (12.46 ± 5.17) or the use of ZirClean^TM (11.59 ± 5.53). The bond strength of resin cement to zirconia was influenced by cleaning methods.

Effect of air abrasion, acid etching, and aging on the shear bond strength with resin cement to 3Y-TZP zirconia

This study investigates the effect of acid etching treatment on the surface microstructure, surface roughness, and surface contact angle of zirconia and compares the effects of air abrasion, different etching times, and aging on the shear bond strength (SBS) of resin cement on the zirconia surface. 480 specimens (9 × 10 × 10 mm) were divided into as-sintered and air-abraded groups, and each group was further subdivided into six groups based on etching time (0, 3, 5, 10, 20, and 30 min). The etching solution comprised hydrofluoric acid 25%, sulfuric acid 16%, hydrogen peroxide, methyl alcohol, and purified water. The shear bond strength (SBS), scanning electron microscopy, surface roughness, contact angle, and failure mode were measured. The results indicated that the mean SBS values increased and decreased significantly when the etching times increased to 20 min and 30 min, respectively, in both groups. Further, SBS after aging was lower than that before aging in all groups. Sandblasting, etching time, and aging all showed significant effects (p < 0.001) in the three-way analysis of variance. In addition, the surface roughness increased and the contact angle decreased significantly with an increase in etching time. Thus, the acid-etching treatment induced significant changes on the zirconia surface and increased the SBS of the resin cement. The results of this in vitro study suggest that acid etching is a promising alternative for zirconia surface treatment.

The Effectiveness of Various Functional Monomers in Self-adhesive Resin Cements on Prosthetic Materials

Aim

This study examined the influence of various functional monomers in two self-adhesive resin cements (SACs) on prosthetic materials.

Materials and Methods

Base metal alloy, lithium disilicate glass-ceramic, and zirconia were used as bonding materials. Silicon carbide paper was used to polish the specimens. Two self-adhesive resin cements (Panavia SA luting multi, PAM, and Maxcem elite chroma, MAC) were used. Ten specimens for each material were produced and resin cements were bonded to each material. The specimens were stored in 37°C distilled water in an incubator for 24 hours. A universal testing machine was used to measure the shear bond strength. The data were statistically examined using one-way ANOVA and Tukey's test.

Results

In all prosthetic materials, PAM had the highest bond strength. In lithium disilicate glass-ceramic, the lowest bond strength was found with MAC.

Conclusion

The self-adhesive resin cement (PAM) containing 10-MDP monomer and long carbon-chain silane was performed the greatest outcome in the shear bond strength on the prosthetic materials and self-adhesive resin cement interface.

Role of 3-Methacryloxypropyltrimethoxysilane in Dentin Bonding

In this study, we aimed to examine the effect of 3-methacryloxypropyltrimethoxysilane (MPS) on dentin collagen and the impact of MPS and 10-methacryloyloxydecyl dihydrogen phosphate (MDP) together and separately on resin-dentin bonding. Eight groups of primers were prepared: control group, MDP, MPS5, MPS5 + MDP, MPS10, MPS10 + MDP, MPS15, and MPS15 + MDP. The potential interaction between MPS and collagen was assessed by molecular dynamics, contact angle measurement, zeta potential measurement, and chemoanalytic characterization using X-ray photoelectron spectroscopy, Raman spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, and ultraviolet-visible spectroscopy. Microtensile bond strength (μTBS) and nanoleakage were evaluated after 24 h or 12 months of water storage. In situ zymography was used to evaluate the enzyme activity at the bonded interface. According to chemoanalytic characterization and molecular dynamics, a weak interaction between MPS and collagen was observed. MPS enhanced the hydrophobicity and negative charge of the collagen surface (P < 0.05). Applying an MDP-containing primer increased μTBS (P > 0.05) and reduced fluorescence after 24 h of water storage. Water storage for 12 months decreased μTBS (P < 0.05) and increased nanoleakage for all groups. MPS conditioning did not change μTBS and nanoleakage after 24 h of water storage or aging. The MPS10 + MDP and MPS15 + MDP groups presented more silver nitrate and μTBS decrease than the MDP group (P < 0.05). These results indicated that MPS had a weak interaction with collagen that enhanced its surface negative charge and hydrophobicity without adversely affecting dentin bonding. However, compared to MDP alone, mixing MDP with MPS impaired their effectiveness and made the dentin bonding unstable.

Performance of Universal Adhesives in Composite Resin Repair

Aim. The objective of this in vitro study was to evaluate the bond strength of universal adhesive systems in self-etch and etch-and-rinse modes at the repair interface between aged and new composite resins. Materials and Methods. Composite resin (Filtek Z250) was thermocycled to represent aged composite resin to be repaired. New composite resin was placed over the aged substrate after surface conditioning: NC (negative control, no surface treatment), A (adhesive only), SBM (Scotchbond Multi-Purpose in etch-and-rinse mode), CSE (Clearfil SE Bond in self-etch mode), SBU (Single Bond Universal), ABU (All Bond Universal), and TBU (Tetric N-Bond Universal). Universal adhesives (SBU, ABU, and TBU) were applied both in etch-and-rinse and self-etch modes. $1\text{mm}\times 1\text{mm}\times 8\text{mm}$ beams were sectioned, and microtensile bond strength was measured after 24 hours of water storage and 10,000 thermocycling processes ( $n=20$ /group). The fracture surfaces were observed with a scanning electron microscope to evaluate the failure pattern. Results. The repair bond strength between the old and new composite resins was material-dependent. Universal adhesives significantly improved the repair bond strength ( $p<0.05$ ), while no significant difference was observed between the etch modes (self-etch or etch-and-rinse) for each universal adhesive ( $p>0.05$ ). Thermocycling significantly reduced the bond strength in all groups ( $p<0.05$ ). Conclusion. Universal adhesives in both etch-and-rinse and self-etch modes outperformed the conventional 3-step etch-and-rinse and 2-step self-etch adhesive systems in terms of resin repair bond strength.

A comprehensive in vitro study on the performance of two different strategies to simplify adhesive bonding

Objective

The purpose of this study is to compare the bonding performance and mechanical properties of two different resin composite cements using simplified adhesive bonding strategies.

Materials and methods

Shear bond strength of two resin composite cements (an adhesive cement: Panavia V5 [PV5] and a self‐adhesive cement: RelyX Universal [RUV]) to human enamel, dentin, and a variety of restorative materials (microfilled composite, composite, polymer‐infiltrated ceramic, feldspar ceramic, lithium disilicate and zirconia) was measured. Thermocycle aging was performed with selected material combinations.

Results

For both cements, the highest shear bond strength to dentin was achieved when using a primer (PV5: 18.0 ± 4.2 MPa, RUV: 18.2 ± 3.3 MPa). Additional etching of dentin reduced bond strength for RUV (12.5 ± 4.9 MPa). On enamel, PV5 achieved the highest bond strength when the primer was used (18.0 ± 3.1 MPa), while for RUV etching of enamel and priming provided best results (21.2 ± 6.6 MPa). Shear bond strength of RUV to restorative materials was superior to PV5. Bonding to resin‐based materials was predominantly observed for RUV.

Conclusions

While use of RUV with the selective‐etch technique is slightly more labor intensive than PV5, RUV (with its universal primer) displayed a high‐bonding potential to all tested restorative materials, especially to resin.

Clinical significance

For a strong adhesion to the tooth substrate, PV5 (with its tooth primer) is to be preferred because etching with phosphoric acid is not required. However, when using a wide range of varying restorative materials, RUV with its universal primer seems to be an adequate option.

Dentin contamination during repair procedures: A threat to universal adhesives?

Objective

This study examined the influence of surface contamination during repair procedures with hydrofluoric acid, silane, or ammonium polyfluoride on the bond strength of universal adhesives to dentin using different etching modes before and after thermocycling.

Materials and Methods

Dentin surfaces of human molars were contaminated in different ways (silane, hydrofluoric acid, ammonium polyfluoride, and no pretreatment as control) followed by application of a universal adhesive (etch & rinse or self‐etch mode). After a composite build‐up was placed onto each tooth, sticks for the microtensile bond strength (MTBS) test were sectioned. Half of the sticks were tested after water storage for 24 h, the other half after thermocycling (15,000 cycles, 5/55°C). The MTBS data were analyzed statistically by using the Kolmogorov–Smirnov test, one‐way analysis of variance, and Tukey HSD test (p < 0.05). The fracture patterns of all specimens were evaluated and analyzed using a χ² test.

Results

Dentin contamination with a multifunctional silane does not influence microtensile bond strength irrespective of aging. Contamination with hydrofluoric acid or an ammonium polyfluoride primer leads to a significantly lower bond strength after aging, irrespective of the etch mode.

Conclusion

Dentin contamination with hydrofluoric acid or ammonium polyfluorides during repair procedures should be avoided, as they appear to decrease the bond strength of universal adhesives.

In Vitro Performance of Different Universal Adhesive Systems on Several CAD/CAM Restorative Materials After Thermal Aging

OBJECTIVE

To evaluate the microshear bond strength (mSBS) of 10 universal adhesive systems applied on five different CAD/CAM restorative materials, immediately and after thermal aging.

METHODS AND MATERIALS

Five CAD/CAM materials were selected: 1) feldspathic glass ceramic (FeCe); 2) pre-polymerized reinforced resin composite (ReRC); 3) leucite-reinforced glass ceramic (LeGC); 4) lithium disilicate (LiDi); and 5) yttrium-stabilized zirconium dioxide (ZiDi). For each material, 15 blocks were cut into four rectangular sections (6 × 6 × 6 mm; n=60 per group) and processed as recommended by the respective manufacturer. For each indirect material, the following adhesive systems were applied according to the respective manufacturer's instructions: 1) AdheSE Universal [ADU]; 2) All-Bond Universal [ABU]; 3) Ambar Universal [AMB]; 4) Clearfil Universal Bond [CFU]; 5) Futurabond U [FBU]; 6) One Coat 7 Universal [OCU]; 7) Peak Universal Bond [PUB]; 8) Prime&Bond Elect [PBE]; 9) Scotchbond Universal Adhesive [SBU]; 10) Xeno Select [XEN, negative control]. After the application of the adhesive system, cylinder-shaped transparent matrices were filled with a dual-curing resin cement (NX3) and light cured. Specimens were tested in shear mode at 1.0 mm/ min (mSBS), after 24 hours and 10,000 thermal cycles (TC). All data were submitted to statistical analysis (α=0.05).

RESULTS

For FeCe, there was no significant decrease in mean mSBS for AMB, FBU, and SBU after TC when compared at 24 hours. For ReRC, AMB and SBU showed higher mean mSBS when compared to CFU and XEN, after 24 hours and TC. For LiDi, FBU and OCU showed higher mean mSBS when compared to CFU and XEN, after 24 hours and TC. For LeGC, AMB and PUB showed higher mean mSBS when compared to XEN, after 24 hours and TC. For ZiDi, OCU and SBU showed higher mean mSBS when compared to XEN, after 24 hours and TC. In addition, PBE and XEN showed the lowest mean mSBS after TC with higher percentage of bond strength reduction.

CONCLUSIONS

The mean mSBS among the different universal adhesives varied widely for each CAD/ CAM material used. In addition, most universal adhesives underwent a statistically significant bond strength reduction after TC.

Bracket Bonding to All-Ceramic Materials with Universal Adhesives

The need for bracket bonding to ceramic restorations is increasing. The aim of this study was to evaluate the effect of universal adhesives on bracket adhesion to polished or glazed lithium disilicate (LDS) and monolithic zirconia (MZ) surfaces. One hundred and twenty brackets (N = 10) were bonded to either polished or glazed LDS (e.max CAD B32, Ivoclar Vivadent, Schaan, Liechtenstein) and MZ (In-Ceram^® YZ, VITA, Bad Sackingen, Germany) blocks using three different adhesives combined with Transbond™ XT Paste (3M Unitek, Monrovia, CA, USA). Tested universal adhesives were Scotchbond™ Universal Adhesive (SU, 3M St. Paul, MN, USA) and Assure Plus (AP, Reliance, Itasca, IL, USA). Transbond™ XT Primer (XTP, 3M Unitek, Monrovia, CA, USA) served as a control adhesive. Bracket bond strength was measured in shear mode (SBS). Failure type was determined by the Modified Adhesive Remnant Index (ARI). Data were statistically analyzed. On polished LDS, SU yielded bracket SBS significantly superior to those of AP and XTP. On polished MZ, the use of SU and AP significantly enhanced bracket retention as compared with XTP. Low SBS values, below the threshold of clinical acceptability, were reached by all tested adhesives on glazed LDS and MZ specimens. SBS measurements corresponded with failure type observations. Universal adhesives SU and AP could be considered for use on polished LDS and MZ surfaces.

MDP Salts: A New Bonding Strategy for Zirconia

Durable resin-ceramic adhesion may influence the clinical success of ceramic restorations, which has been one of the challenging issues in dentistry. The present study assessed the bond strength and chemical interaction of 10-methacryloxydecyl dihydrogen phosphate (MDP), MDP+silane, and MDP-salt primers to alumina-blasted zirconia ceramic by tensile bond strength test, surface elemental composition with x-ray photoelectron spectroscopy analysis, contact angle measurement, surface morphology with scanning electron microscopy, and surface topography with 3-dimensional confocal laser scanning microscope analyses. MDP-salt showed the highest tensile bond strength before and after thermocycling when compared with MDP and MDP+silane (P < 0.05). The measured contact angle values differed significantly (P < 0.001) in the order of MDP-salt > control (no chemical pretreatment) > MDP+silane > MDP. There was no difference in surface roughness (P = 0.317) and surface topography among all tested groups. Zirconia treated with MDP-salt showed phosphorus peaks in addition to zirconia and alumina peaks. MDP-salt has zirconia priming properties, which improves bonding performance to resin cement.

Resin Cement-Zirconia Bond Strengthening by Exposure to Low-Temperature Atmospheric Pressure Multi-Gas Plasma

The purpose of this study was to investigate the effect of gas species used for low-temperature atmospheric pressure plasma surface treatment, using various gas species and different treatment times, on zirconia surface state and the bond strength between zirconia and dental resin cement. Three groups of zirconia specimens with different surface treatments were prepared as follows: untreated group, alumina sandblasting treatment group, and plasma treatment group. Nitrogen (N₂), carbon dioxide (CO₂), oxygen (O₂), argon (Ar), and air were employed for plasma irradiation. The bond strength between each zirconia specimen and resin cement was compared using a tension test. The effect of the gas species for plasma irradiation on the zirconia surface was investigated using a contact angle meter, an optical interferometer, an X-ray diffractometer, and X-ray photoelectric spectroscopy. Plasma irradiation increased the wettability and decreased the carbon contamination on the zirconia surface, whereas it did not affect the surface topography and crystalline phase. The bond strength varied depending on the gas species and irradiation time. Plasma treatment with N₂ gas significantly increased bond strength compared to the untreated group and showed a high bond strength equivalent to that of the sandblasting treatment group. The removal of carbon contamination from the zirconia surface and an increase in the percentage of Zr-O₂ on the zirconia surface by plasma irradiation might increase bond strength.