Heterobimetallic NiFe Complex for Photocatalytic CO2 Reduction: United Efforts of NiFe Dual Sites

Catalytic CO2 reduction poses a significant challenge for the conversion of CO2 into chemicals and fuels. Ni-Fe carbon monoxide dehydrogenase ([NiFe]-CODH) effectively mediates the reversible conversion of CO2 and CO at a nearly thermodynamic equilibrium potential, highlighting the heterobimetallic cooperation for the design of CO2 reduction catalysts. However, numerous NiFe biomimetic model complexes have realized little success in CO2 reduction catalysis, which underscores the crucial role of precise bimetallic configuration and functionality. Herein, we presented a heterobimetallic NiFe complex for the photocatalytic reduction of CO2 to CO, demonstrating significantly enhanced catalytic performance compared to the homonuclear NiNi catalyst. Photocatalytic and mechanistic investigations revealed that with the assistance of a redox-active phenanthroline ligand, NiFe achieves dual-site activation of CO2 through a pivotal intermediate, NiII(μ-CO22--κC:κO)FeII, where the Lewis acidity of the FeII site plays an important role, as corroborated in the homonuclear FeFe system. This study introduces the first heteronuclear NiFe molecular catalyst capable of efficiently catalyzing the reduction of CO2 to CO, deepening insights into heterobimetallic cooperation and offering a novel strategy for designing highly active and selective CO2 reduction catalysts.

Diiron Complexes with Rigid and Conjugated S-to-S Bridges for Electrocatalytic Reduction of CO2

Electroreduction of CO2 to value-added low-carbon chemicals is a promising way for carbon neutrality and CO2 utilization. It was found that the diiron complex [(μ-bdt)Fe2(CO)6] (bdt = benzene-1,2-dithiolate) has high catalytic activity for electrocatalytic CO2 reduction. To further study the effect of the S-to-S bridge on the catalytic performances of diiron complexes for electrochemical CO2 reduction, four diiron complexes 1-4 with different rigid and conjugated S-to-S bridges were either selected or designed. The electrocatalytic studies showed that under optimal conditions, 2 with a 2,3-naphthalenedithiolato bridge exhibited the lowest catalytic onset potential (Eonset = -1.75 V vs Fc+/0), while 4 with a diphenyl-1,2-vinylidene bridge displayed the highest catalytic activity (TOFmax = 295 s-1), which is 1.5 times that of [(μ-bdt)Fe2(CO)6]. The controlled potential electrolysis experiments of 4 in 0.1 M MeOH/MeCN at -2.35 V vs Fc+/0 gave a total faradaic yield close to 100%, with selectivities of 77%, 9%, and 14% for HCOOH, CO, and H2, respectively. The mechanism for CO2 reduction was studied using density functional theory, IR spectroelectrochemistry, and electrochemical methods. The results indicate that modifying the structure of the S-to-S bridge is an effective strategy to improve the catalytic performance of diiron complexes for electrocatalytic CO2 reduction.

Bioinspired Binickel Catalyst for Carbon Dioxide Reduction: The Importance of Metal-ligand Cooperation

Catalyst design for the efficient CO2 reduction reaction (CO2RR) remains a crucial challenge for the conversion of CO2 to fuels. Natural Ni-Fe carbon monoxide dehydrogenase (NiFe-CODH) achieves reversible conversion of CO2 and CO at nearly thermodynamic equilibrium potential, which provides a template for developing CO2RR catalysts. However, compared with the natural enzyme, most biomimetic synthetic Ni-Fe complexes exhibit negligible CO2RR catalytic activities, which emphasizes the significance of effective bimetallic cooperation for CO2 activation. Enlightened by bimetallic synergy, we herein report a dinickel complex, NiIINiII(bphpp)(AcO)2 (where NiNi(bphpp) is derived from H2bphpp = 2,9-bis(5-tert-butyl-2-hydroxy-3-pyridylphenyl)-1,10-phenanthroline) for electrocatalytic reduction of CO2 to CO, which exhibits a remarkable reactivity approximately 5 times higher than that of the mononuclear Ni catalyst. Electrochemical and computational studies have revealed that the redox-active phenanthroline moiety effectively modulates the electron injection and transfer akin to the [Fe3S4] cluster in NiFe-CODH, and the secondary Ni site facilitates the C-O bond activation and cleavage through electron mediation and Lewis acid characteristics. Our work underscores the significant role of bimetallic cooperation in CO2 reduction catalysis and provides valuable guidance for the rational design of CO2RR catalysts.

Exploring the Electrochemistry of Iron Dithiolene and Its Potential for Electrochemical Homogeneous Carbon Dioxide Reduction

In this work, the dithiolene complex iron(III) bis-maleonitriledithiolene [Fe(mnt)2] is characterised and evaluated as a homogeneous CO2 reduction catalyst. Electrochemically the Fe(mnt)2 is reduced twice to the trianionic Fe(mnt)2 3- state, which is correspondingly found to be active towards CO2. Interestingly, the first reduction event appears to comprise overlapping reversible couples, attributed to the presence of both a dimeric and monomeric form of the dithiolene complex. In acetonitrile Fe(mnt)2 demonstrates a catalytic response to CO2 yielding typical two-electron reduction products: H2, CO and CHOOH. The product distribution and yield were governed by the proton source. Operating with H2O as the proton source gave only H2 and CO as products, whereas using 2,2,2-trifluoroethanol gave 38 % CHOOH faradaic efficiency with H2 and CO as minor products.

Molecular Catalysts for the Reductive Homocoupling of CO2 towards C2+ Compounds

The conversion of CO2 into multicarbon (C2+ ) compounds by reductive homocoupling offers the possibility to transform renewable energy into chemical energy carriers and thereby create "carbon-neutral" fuels or other valuable products. Most available studies have employed heterogeneous metallic catalysts, but the use of molecular catalysts is still underexplored. However, several studies have already demonstrated the great potential of the molecular approach, namely, the possibility to gain a deep mechanistic understanding and a more precise control of the product selectivity. This Minireview summarizes recent progress in both the thermo- and electrochemical reductive homocoupling of CO2 toward C2+ products mediated by molecular catalysts. In addition, reductive CO homocoupling is discussed as a model for the further conversion of intermediates obtained from CO2 reduction, which may serve as a source of inspiration for developing novel molecular catalysts in the future.

Transition Metal Complexes as Catalysts for the Electroconversion of CO2 : An Organometallic Perspective

The electrocatalytic transformation of carbon dioxide has been a topic of interest in the field of CO2 utilization for a long time. Recently, the area has seen increasing dynamics as an alternative strategy to catalytic hydrogenation for CO2 reduction. While many studies focus on the direct electron transfer to the CO2 molecule at the electrode material, molecular transition metal complexes in solution offer the possibility to act as catalysts for the electron transfer. C1 compounds such as carbon monoxide, formate, and methanol are often targeted as the main products, but more elaborate transformations are also possible within the coordination sphere of the metal center. This perspective article will cover selected examples to illustrate and categorize the currently favored mechanisms for the electrochemically induced transformation of CO2 promoted by homogeneous transition metal complexes. The insights will be corroborated with the concepts and elementary steps of organometallic catalysis to derive potential strategies to broaden the molecular diversity of possible products.

Dirhodium complexes as electrocatalysts for CO2 reduction to HCOOH: role of steric hindrance on selectivity

A series of Rh₂(ii,ii) complexes were shown to electrocatalytically reduce CO₂ to HCOOH. Electrochemical and spectroelectrochemical studies reveal a correlation between catalytic selectivity and efficiency with the steric bulk at the axial sites afforded by the bridging ligands. Mechanistic studies point to the presence of a Rh₂(ii,i)-H hydride as a key intermediate in the catalytic cycle.

Carbon Dioxide Reduction Mediated by Iron Catalysts: Mechanism and Intermediates That Guide Selectivity

The reduction of carbon dioxide represents an ambitious target, with potential impact on several of the United Nations' sustainable development goals including climate action, renewable energy, sustainable cities, and communities. This process shares a common issue with other redox reactions involved in energy-related schemes (i.e., proton reduction to hydrogen and water oxidation to oxygen), that is, the need for a catalyst in order to proceed at sustainable rates. Moreover, the reduction of CO₂ faces an additional selectivity complication, since several products can be formed, including carbon monoxide, formic acid/formate, methanol, and methane. In this Mini-Review, we will discuss iron-based molecular catalysts that catalyze the reduction of CO₂, focusing in particular on the selectivity of the processes, which is rationalized and guided on the basis of the reaction mechanism. Inspired by the active sites of carbon monoxide dehydrogenases, several synthetic systems have been proposed for the reduction of CO₂; these are discussed in terms of key intermediates such as iron hydrides or Fe-CO₂ adducts, where the ligand coordination motif, together with the presence of co-additives such as Brønsted acids, nucleophiles, or CO₂ trapping moieties, can guide the selectivity of the reaction. A mechanistic comparison is traced with heterogeneous iron single-atom catalysts. Perspectives on the use of molecular catalysts in devices for sustainable reduction of CO₂ are finally given.

Electrochemical Conversion of CO2 to CO by a Competent FeI Intermediate Bearing a Schiff Base Ligand

Iron complexes with a N₂ O₂ -type N,N'-bis(salicylaldehyde)-1,2-phenylenediamine salophen ligand catalyze the electrochemical reduction of CO₂ to CO in acetonitrile with phenol as the proton donor, giving rise to 90-99 % selectivity, faradaic efficiency up to 58 %, and turnover frequency up to 10³  s^-1 at an overpotential of 0.65 V. This novel class of molecular catalyst for CO₂ reduction operate through a mononuclear Fe^I intermediate, with phenol being involved in the process with first-order kinetics. The molecular nature of the catalyst and the low cost, easy synthesis and functionalization of the salophen ligand paves the way for catalyst engineering and optimization. Competitive electrodeposition of the coordination complex at the electrode surface results in the formation of iron-based nanoparticles, which are active towards heterogeneous electrocatalytic processes mainly leading to proton reduction to hydrogen (faradaic efficiency up to 80 %) but also to the direct reduction of CO₂ to methane with a faradaic efficiency of 1-2 %.

Transition metal-based catalysts for the electrochemical CO2 reduction: from atoms and molecules to nanostructured materials

An overview of the main strategies for the rational design of transition metal-based catalysts for the electrochemical conversion of CO₂, ranging from molecular systems to single-atom and nanostructured catalysts.

Molecular Catalysis for Utilizing CO2 in Fuel Electro-Generation and in Chemical Feedstock

Processes for the conversion of CO2 to valuable chemicals are highly desired as a result of the increasing CO2 levels in the atmosphere and the subsequent elevating global temperature. However, CO2 is thermodynamically and kinetically inert to transformation and, therefore, many efforts were made in the last few decades. Reformation/hydrogenation of CO2 is widely used as a means to access valuable products such as acetic acids, CH4, CH3OH, and CO. The electrochemical reduction of CO2 using hetero- and homogeneous catalysts recently attracted much attention. In particular, molecular CO2 reduction catalysts were widely studied using transition-metal complexes modified with various ligands to understand the relationship between various catalytic properties and the coordination spheres above the metal centers. Concurrently, the coupling of CO2 with various electrophiles under homogeneous conditions is also considered an important approach for recycling CO2 as a renewable C-1 substrate in the chemical industry. This review summarizes some recent advances in the conversion of CO2 into valuable chemicals with particular focus on the metal-catalyzed reductive conversion and functionalization of CO2.

Electro- and Solar-Driven Fuel Synthesis with First Row Transition Metal Complexes

The synthesis of renewable fuels from abundant water or the greenhouse gas CO2 is a major step toward creating sustainable and scalable energy storage technologies. In the last few decades, much attention has focused on the development of nonprecious metal-based catalysts and, in more recent years, their integration in solid-state support materials and devices that operate in water. This review surveys the literature on 3d metal-based molecular catalysts and focuses on their immobilization on heterogeneous solid-state supports for electro-, photo-, and photoelectrocatalytic synthesis of fuels in aqueous media. The first sections highlight benchmark homogeneous systems using proton and CO2 reducing 3d transition metal catalysts as well as commonly employed methods for catalyst immobilization, including a discussion of supporting materials and anchoring groups. The subsequent sections elaborate on productive associations between molecular catalysts and a wide range of substrates based on carbon, quantum dots, metal oxide surfaces, and semiconductors. The molecule-material hybrid systems are organized as "dark" cathodes, colloidal photocatalysts, and photocathodes, and their figures of merit are discussed alongside system stability and catalyst integrity. The final section extends the scope of this review to prospects and challenges in targeting catalysis beyond "classical" H2 evolution and CO2 reduction to C1 products, by summarizing cases for higher-value products from N2 reduction, C x>1 products from CO2 utilization, and other reductive organic transformations.

Electrochemical CO2 reduction by a cobalt bipyricorrole complex: decrease of an overpotential value derived from monoanionic ligand character of the porphyrinoid species

A newly synthesized Co(ii) complex with a monoanionic bipyricorrole ligand is found to catalytically promote a selective CO2 electroreduction to CO with Faradaic efficiency of 75%. Catalytic Tafel plots show that the overpotential of Co(ii) bipyricorrole is 0.35 V lower than that of a Co(ii) complex with the dianionic tetraphenylporphyrin ligand.

A look at periodic trends in d-block molecular electrocatalysts for CO2 reduction

Periodic trends in the electronic structure of the transition metal centers can be used to explain the observed CO₂ reduction activities in molecular electrocatalysts for CO₂ reductions. Research activities concerning both horizontal and vertical trends have been summarized with mononuclear complexes from Group 6 to Group 10.

Molecular polypyridine-based metal complexes as catalysts for the reduction of CO2

Polypyridyl transition metal complexes represent one of the more thoroughly studied classes of molecular catalysts towards CO₂ reduction to date. Initial reports in the 1980s began with an emphasis on 2nd and 3rd row late transition metals, but more recently the focus has shifted towards earlier metals and base metals. Polypyridyl platforms have proven quite versatile and amenable to studying various parameters that govern product distribution for CO₂ reduction. However, open questions remain regarding the key mechanistic steps that govern product selectivity and efficiency. Polypyridyl complexes have also been immobilized through a variety of methods to afford active catalytic materials for CO₂ reductions. While still an emerging field, materials incorporating molecular catalysts represent a promising strategy for electrochemical and photoelectrochemical devices capable of CO₂ reduction. In general, this class of compounds remains the most promising for the continued development of molecular systems for CO₂ reduction and an inspiration for the design of related non-polypyridyl catalysts.

Electrocatalytic Reduction of CO2 to Formate by an Iron Schiff Base Complex

The synthesis, structural characterization, and reactivity of an iron(III) chloride compound of 6,6'-di(3,5-di-tert-butyl-2-hydroxybenzene)-2,2'-bipyridine (Fe(^tbudhbpy)Cl), under electrochemically reducing conditions is reported. In the presence of carbon dioxide (CO₂) under anhydrous conditions in N,N-dimethylformamide (DMF), this complex mediates the 2e^- reductive disproportionation of two equivalents of CO₂ to carbon monoxide (CO) and carbonate (CO₃^2-). Upon addition of phenol (PhOH) as a proton source under CO₂ saturation, catalytic current is observed; product analysis from controlled potential electrolysis experiments shows the majority product is formate (68 ± 4% Faradaic efficiency), with H₂ as a minor product (30 ± 10% Faradaic efficiency) and minimal CO (1.1 ± 0.3% Faradaic efficiency). On the basis of data obtained from cyclic voltammetry and infrared spectroelectrochemistry (IR-SEC), the release of CO from intermediate Fe carbonyl species is extremely slow and undergoes competitive degradation, limiting the activity and lifetime of this catalyst. Mechanistic studies also indicate the phenolate moieties coordinated to Fe are sensitive to protonation in the reduced state, suggesting the possibility of cooperative pendent proton interactions being involved in CO₂ reduction.

Cationic dirhodium(ii,ii) complexes for the electrocatalytic reduction of CO2 to HCOOH

Two formamidinate bridged dirhodium(ii,ii) complexes with chelating diimine ligands L, [Rh₂(μ-DTolF)₂(L)₂]²⁺, were shown to electrocatalytically reduce CO₂ in the presence of H₂O. Analysis of the reaction mixture and headspace following bulk electrolysis revealed H₂ and HCOOH as the major products. The variation in relative product formation is discussed.

Homogeneously Catalyzed Electroreduction of Carbon Dioxide-Methods, Mechanisms, and Catalysts

The utilization of CO₂ via electrochemical reduction constitutes a promising approach toward production of value-added chemicals or fuels using intermittent renewable energy sources. For this purpose, molecular electrocatalysts are frequently studied and the recent progress both in tuning of the catalytic properties and in mechanistic understanding is truly remarkable. While in earlier years research efforts were focused on complexes with rare metal centers such as Re, Ru, and Pd, the focus has recently shifted toward earth-abundant transition metals such as Mn, Fe, Co, and Ni. By application of appropriate ligands, these metals have been rendered more than competitive for CO₂ reduction compared to the heavier homologues. In addition, the important roles of the second and outer coordination spheres in the catalytic processes have become apparent, and metal-ligand cooperativity has recently become a well-established tool for further tuning of the catalytic behavior. Surprising advances have also been made with very simple organocatalysts, although the mechanisms behind their reactivity are not yet entirely understood. Herein, the developments of the last three decades in electrocatalytic CO₂ reduction with homogeneous catalysts are reviewed. A discussion of the underlying mechanistic principles is included along with a treatment of the experimental and computational techniques for mechanistic studies and catalyst benchmarking. Important catalyst families are discussed in detail with regard to mechanistic aspects, and recent advances in the field are highlighted.

Electrocatalytic Reduction of Dioxygen to Hydrogen Peroxide by a Molecular Manganese Complex with a Bipyridine-Containing Schiff Base Ligand

The synthesis and electrocatalytic reduction of dioxygen by a molecular manganese(III) complex with a tetradentate dianionic bipyridine-based ligand is reported. Electrochemical characterization indicates a Nernstian dependence on the added proton source for the reduction of Mn(III) to Mn(II). The resultant species is competent for the reduction of dioxygen to H₂O₂ with 81 ± 4% Faradaic efficiency. Mechanistic studies suggest that the catalytically active species has been generated through the interaction of the added proton donor and the parent Mn complex, resulting in the protonation of a coordinated phenolate moiety following the single-electron reduction, generating a neutral species with a vacant coordination site at the metal center. As a consequence, the active catalyst has a pendent proton source in close proximity to the active site for subsequent intramolecular reactions.

Oxidation-State-Dependent Binding Properties of the Active Site in a Mo-Containing Formate Dehydrogenase

Molybdenum-containing formate dehydrogenase H from Escherichia coli (EcFDH-H) is a powerful model system for studies of the reversible reduction of CO₂ to formate. However, the mechanism of FDH catalysis is currently under debate, and whether the primary Mo coordination sphere remains saturated or one of the ligands dissociates to allow direct substrate binding during turnover is disputed. Herein, we describe how oxidation-state-dependent changes at the active site alter its inhibitor binding properties. Using protein film electrochemistry, we show that formate oxidation by EcFDH-H is inhibited strongly and competitively by N₃^-, OCN^-, SCN^-, NO₂^-, and NO₃^-, whereas CO₂ reduction is inhibited only weakly and not competitively. During catalysis, the Mo center cycles between the formal Mo(VI)═S and Mo(IV)-SH states, and by modeling chronoamperometry data recorded at different potentials and substrate and inhibitor concentrations, we demonstrate that both formate oxidation and CO₂ reduction are inhibited by selective inhibitor binding to the Mo(VI)═S state. The strong dependence of inhibitor-binding affinity on both Mo oxidation state and inhibitor electron-donor strength indicates that inhibitors (and substrates) bind directly to the Mo center. We propose that inhibitors bind to the Mo following dissociation of a selenocysteine ligand to create a vacant coordination site for catalysis and close by considering the implications of our data for the mechanisms of formate oxidation and CO₂ reduction.

Enhanced Catalytic Activity of Cobalt Porphyrin in CO2 Electroreduction upon Immobilization on Carbon Materials

In a comparative study of the electrocatalytic CO₂ reduction, cobalt meso-tetraphenylporphyrin (CoTPP) is used as a model molecular catalyst under both homogeneous and heterogeneous conditions. In the former case, employing N,N-dimethylformamide as solvent, CoTPP performs poorly as an electrocatalyst giving low product selectivity in a slow reaction at a high overpotential. However, upon straightforward immobilization of CoTPP onto carbon nanotubes, a remarkable enhancement of the electrocatalytic abilities is seen with CO₂ becoming selectively reduced to CO (>90 %) at a low overpotential in aqueous medium. This effect is ascribed to the particular environment created by the aqueous medium at the catalytic site of the immobilized catalyst that facilitates the adsorption and further reaction of CO₂ . This work highlights the significance of assessing an immobilized molecular catalyst from more than homogeneous measurements alone.

Molecular Cobalt Complexes with Pendant Amines for Selective Electrocatalytic Reduction of Carbon Dioxide to Formic Acid

We report here on a new series of CO₂-reducing molecular catalysts based on Earth-abundant elements that are very selective for the production of formic acid in dimethylformamide (DMF)/water mixtures (Faradaic efficiency of 90 ± 10%) at moderate overpotentials (500-700 mV in DMF measured at the middle of the catalytic wave). The [CpCo(P^R₂N^R'₂)I]⁺ compounds contain diphosphine ligands, P^R₂N^R'₂, with two pendant amine residues that act as proton relays during CO₂-reduction catalysis and tune their activity. Four different P^R₂N^R'₂ ligands with cyclohexyl or phenyl substituents on phosphorus and benzyl or phenyl substituents on nitrogen were employed, and the compound with the most electron-donating phosphine ligand and the most basic amine functions performs best among the series, with turnover frequency >1000 s^-1. State-of-the-art benchmarking of catalytic performances ranks this new class of cobalt-based complexes among the most promising CO₂-to-formic acid reducing catalysts developed to date; addressing the stability issues would allow further improvement. Mechanistic studies and density functional theory simulations confirmed the role of amine groups for stabilizing key intermediates through hydrogen bonding with water molecules during hydride transfer from the Co center to the CO₂ molecule.

Making C–H bonds with CO2: production of formate by molecular electrocatalysts

This article reviews the progress in the reduction of CO₂ to formate using molecular inorganic electrocatalysts, with an emphasis on recent insights and successes in selective C–H bond formation with CO₂ to favor formate production in aqueous solutions.

Carbonic anhydrase mimics for enhanced CO2 absorption in an amine-based capture solvent

Carbonic anhydrase converts CO₂ to HCO₃⁻ in physiological conditions, but in the highly basic amine-containing solutions used industrially for carbon capture, the enzyme does not function. Instead small molecule mimics can catalyze CO₂ hydration.

The effects of chelating N4 ligand coordination on Co(ii)-catalysed photochemical conversion of CO2 to CO: reaction mechanism and DFT calculations

cis-[Co(PDP)Cl₂] complex mediated reduction conversion of CO₂ to CO under photocatalytic or electrocatalytic conditions with high turnovers or Faraday efficiency.

A review of catalysts for the electroreduction of carbon dioxide to produce low-carbon fuels

This paper reviews recent progress made in identifying electrocatalysts for carbon dioxide (CO2) reduction to produce low-carbon fuels, including CO, HCOOH/HCOO(-), CH2O, CH4, H2C2O4/HC2O4(-), C2H4, CH3OH, CH3CH2OH and others. The electrocatalysts are classified into several categories, including metals, metal alloys, metal oxides, metal complexes, polymers/clusters, enzymes and organic molecules. The catalyts' activity, product selectivity, Faradaic efficiency, catalytic stability and reduction mechanisms during CO2 electroreduction have received detailed treatment. In particular, we review the effects of electrode potential, solution-electrolyte type and composition, temperature, pressure, and other conditions on these catalyst properties. The challenges in achieving highly active and stable CO2 reduction electrocatalysts are analyzed, and several research directions for practical applications are proposed, with the aim of mitigating performance degradation, overcoming additional challenges, and facilitating research and development in this area.

A local proton source in a [Mn(bpy-R)(CO)3Br]-type redox catalyst enables CO2 reduction even in the absence of Brønsted acids

A novel bromotricarbonyl Mn(i) complex with a local proton source shows strong redox catalytic properties in acetonitrile homogeneous solution even in the absence of Brønsted acids.