Neutron and X-ray Scattering Characterization of Silica Nanoparticle-Stabilized Polymer Hybrid Latex Particles

A robust route to produce poly(methyl methacrylate) (pMMA) hybrid latex particles (radius ∼250 nm) that are selectively "armored" with silica nanoparticles (radius 12.5 nm) through addition of vinyltriethoxysilane was previously shown ( J. Colloid Interface Sci. 2018, 528, 289-300).Depending on synthesis conditions, the extent of nanoparticle attachment could be varied; however, the mechanism behind this attachment during latex growth remained unclear. The dual population of particles present (silica + polymer) means that particle sizing by dynamic light scattering is ambiguous. Furthermore, the low glass transition temperature (Tg) of polymers such as poly(butyl acrylate) (pBA) typically used in film-forming applications for decorative coatings (i.e., paints) means that the hybrid latex particles are too "soft" for robust analysis through atomic force microscopy (AFM) and scanning electron microscopy (SEM). Here, we show that small- and ultrasmall-angle neutron scattering (SANS and USANS), along with complementary data from small-angle X-ray scattering (SAXS), reveals that these armored hybrid latex particles adopt a raspberry-type configuration, supporting their core-shell structure. The number of nanoparticles present on the surface of the hybrid latex can be adjusted by addition of one of a diverse range of alkyl- or perfluoroalkyl-silanes to alter silica nanoparticle hydrophobicity, and quantified through analysis of scattering data. The approach therefore provides a novel, nonperturbative, and in situ method of quantifying nanoparticle attachment to polymer latex particles.

Application of nanosilica in the construction industry: A bibliometric analysis using Methodi Ordinatio

The number of publications related to the implementation of nanotechnology in the construction industry, and specifically to the application of nanosilica (SiO2), has had a constant increase in recent years. Based on this, in the present work, an analysis was carried out using bibliometric techniques, with the aim at characterizing the development of specialized literature and identifying the largest areas of growth in the field, maintaining hydrophobic nanosilica as the research guideline. This analysis acquired information from the Scopus and Web of Science (WoS) databases to compare bibliometric indicators of the publications. It should be noted that, even though bibliometric analysis is useful to identify the study areas of greatest interest, to complement this work, the implementation of a method that helped in the research process to obtain the most important bibliography was required. This study implemented Methodi Ordinatio, which helped to take a new direction. Therefore, based on this method, a list of articles cataloged and ranked is obtained, which is the basis for integrating the final bibliographic portfolio. •The study applies the Methodi Ordinatio to obtain a portfolio of the most relevant articles to guide the researchers' work.•Insightful information can be obtained using VOSviewer to analyze and visualize metadata of the bibliographic portfolio.•The study demonstrates how the alpha value in the InOrdinatio formula modifies the resulting portfolio.

Preparation and application of carbon black-filled rubber composite modified with a multi-functional silane coupling agent

Carbon black (CB)-filled rubber composites are widely used for tire tread and other rubber products due to their good abrasion resistance and reinforcement. Numerous studies have been focused on the filler-rubber interaction with the aim of obtaining optimum performances. In order to investigate the effect of modification on properties of diene rubber composites, a modified CB-filled isoprene rubber (IR) composite was prepared with a multi-functional silane coupling agent, 2-aminoethyl-2-(3-triethoxysilylpropyl)aminoethyl disulfide (ATD). This modification significantly enhanced the CB-IR interaction and improved CB dispersion. For the modified CB/IR vulcanizates, the tensile strength, stress at 300% elongation, temperature rise, and dynamic loss coefficient were significantly improved at low ATD dosage (1.5 phr). Such modification provides an effective route to prepare CB-reinforced diene rubber composites with low hysteresis and improved mechanical properties.

Synthetic strategies for raspberry-like polymer composite particles

The strategies used for the preparation of raspberry-like polymer composite particles are summarized comprehensively.

Double in Situ Preparation of Raspberry-like Polymer Particles

Well-defined raspberry-like poly(styrene- co-4-vinylpyridine)-SiO₂ nanocomposite particles with a diameter of around 200 nm were easily prepared by a double in situ process in nanoemulsion with the water-soluble dye Eosin Y as the stabilizer. During radical polymerization of the nanodroplets comprising styrene, 4-vinylpyridine (4-VP), and tetraethoxysilane (TEOS), the silane phase is expelled from the polymer phase to the oil/water (o/w) interface. In the later polymerization stage, SiO₂ nanoparticles with a size of around 25 nm were produced via the in situ sol-gel reaction of TEOS at the o/w interface promoted by the negatively charged dye. The pyridine moieties in the copolymer fix the SiO₂ nanoparticles on the surface of the polymer particles by electrostatic interactions without any sign of free unbound silica particles as proven by transmission electron microscopy.

Preparation and Characterization of WS₂@SiO₂ and WS₂@PANI Core-Shell Nanocomposites

Two tungsten disulfide (WS₂)-based core-shell nanocomposites were fabricated using readily available reagents and simple procedures. The surface was pre-treated with a surfactant couple in a layer-by-layer approach, enabling good dispersion of the WS₂ nanostructures in aqueous media and providing a template for the polymerization of a silica (SiO₂) shell. After a Stöber-like reaction, a conformal silica coating was achieved. Inspired by the resulting nanocomposite, a second one was prepared by reacting the surfactant-modified WS₂ nanostructures with aniline and an oxidizing agent in an aqueous medium. Here too, a conformal coating of polyaniline (PANI) was obtained, giving a WS₂@PANI nanocomposite. Both nanocomposites were analyzed by electron microscopy, energy dispersive X-ray spectroscopy (EDS) and FTIR, verifying the core-shell structure and the character of shells. The silica shell was amorphous and mesoporous and the surface area of the composite increases with shell thickness. Polyaniline shells slightly differ in their morphologies dependent on the acid used in the polymerization process and are amorphous like the silica shell. Electron paramagnetic resonance (EPR) spectroscopy of the WS₂@PANI nanocomposite showed variation between bulk PANI and the PANI shell. These two nanocomposites have great potential to expand the use of transition metals dichalcogenides (TMDCs) for new applications in different fields.

Adsorption of Silica Nanoparticles onto Poly(N-vinylpyrrolidone)-Functionalized Polystyrene Latex

This paper presents a more general method to prepare silica-coated polystyrene (PS) particles with minimal excess silica by adsorption, highlighting the role of poly(N-vinylpyrrolidone) (PVP). The method is based on the addition of small silica nanoparticles onto submicrometer-sized near-monodisperse polymer latex particles under the conditions of monolayer silica coverage of the latex surface. Either a cationic or an anionic initiator could be used in the PVP-involved emulsion polymerization to prepare PS particles, and the adsorption was conducted successfully either under acidic or basic conditions. Neither a cationic initiator nor a basic condition is a prerequisite for the adsorption process, which should be related to the much stronger interaction between PVP and the silica surface. This method is expected to substantially extend the adsorption conditions of polymer-silica colloidal nanocomposite syntheses.

Inorganic/polymer hybrid nanoparticles for sensing applications

This paper reviews a wide set of sensing applications based on the special properties associated with inorganic/polymer composite nanoparticles. We first describe optical sensing applications performed with hybrid nanoparticles and hybrid microgels with special emphasis on photoluminescence detection and imaging. Analyte detection with molecularly imprinted polymers and HPLC-based sensing using hybrid nanoparticles as stationary phase is also summarized. The final part is devoted to the study of ultra-sensitive molecule detection by surface-enhanced Raman spectroscopy using core-shell hybrid materials composed of noble metal nanoparticles and cross-linked polymers.

An ATRP-based approach towards water-borne anisotropic polymer–Gibbsite nanocomposites

This paper describes the synthesis of anisotropic polymer–Gibbsite nanocomposites with “muffin-like” morphology via a starved-feed ATRP emulsion polymerisation.

One-step fabrication of 3-methacryloxypropyltrimethoxysilane modified silica and investigation of fluorinated polyacrylate/silica nanocomposite films

One-step synthesis of MPS-functionalized silica and preparation of film forming fluorinated polyacrylate/silica nanocomposite particles.

Physical adsorption of anisotropic titania nanoparticles onto poly(2-vinylpyridine) latex and characterisation of the resulting nanocomposite particles

Four poly(2-vinylpyridine) latexes with intensity-average mean diameters ranging between 246 and 955nm were prepared by aqueous emulsion polymerisation. These latexes were characterised by transmission electron microscopy, field emission scanning electron microscopy, dynamic light scattering, aqueous electrophoresis, disc centrifuge photosedimentometry and thermogravimetry. The adsorption of rice grain-shaped nano-sized titania particles onto the surface of these latex particles from aqueous solution was investigated. It was found that the titania particles adsorb strongly at pH 10 and the optimal loading and packing density of titania was investigated for each latex. The resulting core-shell P2VP-titania nanocomposite particles were characterised in terms of their titania contents, surface coverages and colloidal stabilities. UV-Vis spectra were recorded for the titania nanoparticles, the original P2VP latexes and the poly(2-vinylpyridine)-titania nanocomposite particles. It was found that, for the larger nanocomposite particles, UV-Vis absorption was dominated by the latex core, whereas the smaller P2VP-titania nanocomposite particles exhibited UV attenuation to longer wavelengths compared to both the bare latex and the titania particles. The poly(2-vinylpyridine) cores were selectively removed by calcination of the nanocomposite particles and the resulting hollow titania structures were investigated by transmission electron microscopy.

Correcting for a density distribution: particle size analysis of core-shell nanocomposite particles using disk centrifuge photosedimentometry

Many types of colloidal particles possess a core-shell morphology. In this Article, we show that, if the core and shell densities differ, this morphology leads to an inherent density distribution for particles of finite polydispersity. If the shell is denser than the core, this density distribution implies an artificial narrowing of the particle size distribution as determined by disk centrifuge photosedimentometry (DCP). In the specific case of polystyrene/silica nanocomposite particles, which consist of a polystyrene core coated with a monolayer shell of silica nanoparticles, we demonstrate that the particle density distribution can be determined by analytical ultracentrifugation and introduce a mathematical method to account for this density distribution by reanalyzing the raw DCP data. Using the mean silica packing density calculated from small-angle X-ray scattering, the real particle density can be calculated for each data point. The corrected DCP particle size distribution is both broader and more consistent with particle size distributions reported for the same polystyrene/silica nanocomposite sample using other sizing techniques, such as electron microscopy, laser light diffraction, and dynamic light scattering. Artifactual narrowing of the size distribution is also likely to occur for many other polymer/inorganic nanocomposite particles comprising a low-density core of variable dimensions coated with a high-density shell of constant thickness, or for core-shell latexes where the shell is continuous rather than particulate in nature.

All-acrylic film-forming colloidal polymer/silica nanocomposite particles prepared by aqueous emulsion polymerization

The efficient synthesis of all-acrylic, film-forming, core-shell colloidal nanocomposite particles via in situ aqueous emulsion copolymerization of methyl methacrylate with n-butyl acrylate in the presence of a glycerol-functionalized ultrafine silica sol using a cationic azo initiator at 60 °C is reported. It is shown that relatively monodisperse nanocomposite particles can be produced with typical mean weight-average diameters of 140-330 nm and silica contents of up to 39 wt %. The importance of surface functionalization of the silica sol is highlighted, and it is demonstrated that systematic variation of parameters such as the initial silica sol concentration and initiator concentration affect both the mean particle diameter and the silica aggregation efficiency. The nanocomposite morphology comprises a copolymer core and a particulate silica shell, as determined by aqueous electrophoresis, X-ray photoelectron spectroscopy, and electron microscopy. Moreover, it is shown that films cast from n-butyl acrylate-rich copolymer/silica nanocomposite dispersions are significantly more transparent than those prepared from the poly(styrene-co-n-butyl acrylate)/silica nanocomposite particles reported previously. In the case of the aqueous emulsion homopolymerization of methyl methacrylate in the presence of ultrafine silica, a particle formation mechanism is proposed to account for the various experimental observations made when periodically sampling such nanocomposite syntheses at intermediate comonomer conversions.

Solid-state nuclear magnetic resonance studies of vinyl polymer/silica colloidal nanocomposite particles

Solid-state nuclear magnetic resonance (NMR) has been used to characterize the interface between the organic and inorganic components of "core-shell" colloidal nanocomposite particles synthesized by in situ aqueous (co)polymerization of styrene and/or n-butyl acrylate in the presence of a glycerol-functionalized silica sol. Polymer protons are in close proximity (<5 A) to surface silanol sites in all the nanocomposites studied, indicating that either styrene or n-butyl side groups extend between the glycerol-functional silane molecules toward the surface of the silica particles. For the poly(styrene-co-n-butyl acrylate)/silica nanocomposite n-butyl acrylate residues are located closer to the surface of the silica particle than styrene residues, suggesting a specific interaction between the former and the glycerol-functionalized silica surface. The most likely explanation is a hydrogen bond between the ester carbonyl and the glycerol groups, although this cannot be observed directly. For the Bindzil CC40 glycerol-functionalized silica sol the relative intensities of (29)Si NMR lines corresponding to T and Q(3) environments imply that there are approximately twice as many unreacted silanol groups on the silica surface as attached silane molecules.

Polymer encapsulated gibbsite nanoparticles: efficient preparation of anisotropic composite latex particles by RAFT-based starved feed emulsion polymerization

Anisotropic polymer-inorganic composite latex particles were synthesized by using a RAFT-based encapsulation approach on cationic gibbsite platelets. By using the RAFT agent dibenzyl trithiocarbonate, a series of amphipatic living random RAFT copolymers with different combinations of acrylic acid and butyl acrylate units were synthesized. These RAFT copolymers were used as living stabilizers for the gibbsite platelets and chain extended to form a polymeric shell by starved feed emulsion polymerization. Cryo-TEM characterization of the resulting composite latexes demonstrates the formation of anisotropic composite latex particles with mostly one platelet per particle. Monomer feed composition, chain length, and hydrophilic-lipophilic balance of the RAFT copolymer were found to be important factors for the overall efficiency of the encapsulation. Good control over platelet orientation and high encapsulation efficiency were achieved via this route.

Packing efficiency of small silica particles on large latex particles: a facile route to colloidal nanocomposites

The adsorption of small silica particles onto large sterically stabilized poly(2-vinylpyridine) [P2VP] latex particles in aqueous solution is assessed as a potential route to nanocomposite particles with a "core-shell" morphology. Geometric considerations allow the packing efficiency, P, to be related to the number of adsorbed silica particles per latex particle, N. Making no assumptions about the packing structure, this approach leads to a theoretical estimate for P of 86 +/- 4%. Experimentally, dynamic light scattering is used to obtain a plot of hydrodynamic diameter against N, which indicates the conditions required for monolayer coverage of the latex by the silica particles. Transmission electron microscopy confirmed that, at approximately monolayer coverage, calcination of these nanocomposite particles led to the formation of well-defined hollow silica shells. This is interpreted as strong evidence for a contiguous monolayer of silica particles surrounding the latex cores. On this basis, an experimental value for P of 69 +/- 4% was estimated for nanocomposite particles prepared by the heteroflocculation of a 20 nm silica sol with near-monodisperse P2VP latexes of either 463 or 616 nm diameter at approximately pH 10. X-ray photoelectron spectroscopy was used to quantify the extent of latex surface coverage by the silica particles. This technique gave good agreement with the silica packing efficiencies estimated from calcination studies.

Efficient preparation of polystyrene/silica colloidal nanocomposite particles by emulsion polymerization using a glycerol-functionalized silica sol

Colloidally stable polystyrene/silica nanocomposite particles of around 200-400 nm diameter and containing 22-28 wt % silica can be readily prepared by aqueous emulsion polymerization at 60 degrees C using a cationic azo initiator in combination with a commercially available glycerol-functionalized ultrafine aqueous silica sol in the absence of any surfactant, auxiliary comonomer, or nonaqueous cosolvent. Optimization of the initial silica sol concentration allows relatively high silica aggregation efficiencies (up to 95%) to be achieved. Control experiments confirm the importance of selecting a cationic initiator, since nanocomposite particles were not formed when using an anionic persulfate initiator. Similarly, the glycerol groups on the silica sol surface were also shown to be essential for successful nanocomposite particle formation: use of an unfunctionalized ultrafine silica sol in control experiments invariably led to polystyrene latex coexisting with the silica nanoparticles, rather than efficient nanocomposite formation. Electron spectroscopy imaging transmission electron microscopy studies of ultramicrotomed polystyrene/silica nanocomposite particles indicate well-defined "core-shell" particle morphologies, which is consistent with both X-ray photoelectron spectroscopy and aqueous electrophoresis studies.

Preparation of silica-coated poly(styrene-co-4-vinylpyridine) particles and hollow particles

This paper presents a novel method for preparation of polymer-silica colloidal nanocomposites based on emulsion polymerization and subsequent sol-gel nanocoating process. The polystyrene latex particles bearing basic groups on their surfaces were successfully synthesized through emulsion polymerization using 4-vinylpyridine (4VP) as a functional comonomer and polyvinylpyrrolidone (PVP) as a surfactant. A series of poly(styrene-co-4-vinylpyridine)/SiO2 nanocomposite particles with smooth or rough core-shell morphology were obtained through the coating process. The poly(styrene-co-4-vinylpyridine) particles could be dissolved subsequently or simultaneously during the sol-gel coating process to form hollow particles. The effects of the amount of 4VP, PVP, NH(4)OH, and tetraethoxysilane (TEOS) on both the nanocomposite particles and hollow particles were investigated. Transmission electron microscopy showed that the morphology of the nanocomposite particles and hollow particles was strongly influenced by the initial feed of the comonomer 4VP and the coupling agent PVP. The conditions to obtain all hollow particles were also studied. Thermogravimetric analysis and energy dispersive X-ray spectroscopy analyses indicated that the interiors of hollow particles were not really "hollow".

Efficient synthesis of poly(2-vinylpyridine)-silica colloidal nanocomposite particles using a cationic azo initiator

Colloidal poly(2-vinylpyridine)-silica nanocomposite particles can be efficiently prepared by emulsion polymerization at 60 degrees C using a commercial 20 nm aqueous silica sol as the sole stabilizing agent. Unlike previously reported colloidal nanocomposite syntheses, transmission electron microscopy studies indicate very high silica aggregation efficiencies (88-99%). The key to success is simply the selection of a suitable cationic azo initiator. In contrast, the use of an anionic persulfate initiator leads to substantial contamination of the nanocomposite particles with excess silica sol. The cationic azo initiator is electrostatically adsorbed onto the anionic silica sol at submonolayer coverage, which suggests that surface polymerization may be important for successful nanocomposite formation. Moreover, the 2-vinylpyridine can be partially replaced with either styrene or methacrylic comonomers to produce a range of copolymer-silica nanocomposite particles. The poly(2-vinylpyridine)-silica nanocomposite particles have a well-defined core-shell morphology, with poly(2-vinylpyridine) cores and silica shells; mean diameters typically vary from 180 to 220 nm, and mean silica contents range from 27 to 35% by mass.

Graft polymerization of styrene initiated by covalently bonded peroxide groups on silica

The graft polymerization of styrene initiated by immobilized peroxide groups was investigated. Three different types of modification reactions were used to introduce peroxide groups which are directly attached onto the surface of two different silica supports. Silanol groups were chlorinated using thionyl chloride or tetrachlorosilane. In another reaction pathway 1,3,5-benzenetricarbonyl chloride enabled the introduction of free acid chloride residues bonded onto the surface of silica. tert-Butyl hydroperoxide (TBHP) was used to transform the chlorosilyl and the acid chloride groups into peroxide residues. In a further reaction step the covalently bonded peroxides initiated the polymerization of styrene to form grafted polystyrene directly attached onto the silica support. Solid-state 13C CP/MAS NMR spectroscopy, and thermogravimetric and scanning electron microscope measurements enabled a clear structure and property elucidation of the different bonded phases. The highest amount of grafted polystyrene was achieved employing the acid chloride synthesis pathway with silica-gel, whereas modification of spherical silica only led to minor amounts of grafted polymer. The results contribute to the evolving need to understand particle surface modifications and may have positive impact on development of new HPLC stationary phases for improved elutant resolution.

Organic-inorganic hybrid nanoparticles: surface characteristics and interactions with a polyester resin

Organic-inorganic hybrid nanoparticles, derived from silica precursors with different organic functionalities (methyl, ethyl, vinyl, and phenyl) synthesized via a modified Stöber method have been investigated. These particles are intended as modifiers for polymers and polymer matrix composites. Therefore, the characteristics of a polyester matrix have also been determined, and the likely interactions with the particles have been proposed. Particles have been characterized using inverse gas chromatography (IGC), X-ray photoelectron spectroscopy (XPS), and infrared spectroscopy (FT-IR). The particles show two different sets of characteristics, with methyl, ethyl, and vinyl modified silicas showing one type of behavior and the phenyl modified silica behaving rather differently. The methyl, ethyl, and vinyl groups exhibit the appearance of uniform coverage, as they are comparatively small and tightly packed, which will prevent interaction of matrix resin with retained silanol groups. The phenyl group, which is comparatively large, is not able to pack as closely, which results in a reduction of the presence and availability of silanol groups, compared to an unmodified fumed silica, but not complete inaccessibility as far as the matrix resin is concerned.

Effects of pH and salt concentration on oil-in-water emulsions stabilized solely by nanocomposite microgel particles

Aqueous dispersions of lightly cross-linked poly(4-vinylpyridine)/silica nanocomposite microgel particles are used as a sole emulsifier of methyl myristate and water (1:1 by volume) at various pH values and salt concentrations at 20 degrees C. These particles become swollen at low pH with the hydrodynamic diameter increasing from 250 nm at pH 8.8 to 630 nm at pH 2.7. For batch emulsions prepared at pH 3.4, oil-in-water (o/w) emulsions are formed that are stable to coalescence but exhibit creaming. Below pH 3.3, however, these emulsions are very unstable to coalescence and rapid phase separation occurs just after homogenization (pH-dependent). The pH for 50% ionization of the pyridine groups in the particles in the bulk (pK(a)) was determined to be 3.4 by acid titration measurements of the aqueous dispersion. Thus, the charged swollen particles no longer adsorb at the oil-water interface. For continuous emulsions (prepared at high pH with the pH then decreased abruptly or progressively), demulsification takes place rapidly below pH 3.3, implying that particles adsorbed at the oil-water interface can become charged (protonated) and detached from the interface in situ (pH-responsive). Furthermore, at a fixed pH of 4.0, addition of sodium chloride to the aqueous dispersion increases the degree of ionization of the particles and batch emulsions are significantly unstable to coalescence at a salt concentration of 0.24 mol kg(-1). The degree of ionization of such microgel particles is a critical factor in controlling the coalescence stability of o/w emulsions stabilized by them.

Characterization of the nanomorphology of polymer-silica colloidal nanocomposites using electron spectroscopy imaging

The internal nanomorphologies of two types of vinyl polymer-silica colloidal nanocomposites were assessed using electron spectroscopy imaging (ESI). This technique enables the spatial location and concentration of the ultrafine silica sol within the nanocomposite particles to be determined. The ESI data confirmed that the ultrafine silica sol was distributed uniformly throughout the poly(4-vinylpyridine)/silica nanocomposite particles, which is consistent with the "currant bun" morphology previously used to describe this system. In contrast, the polystyrene/silica particles had a pronounced "core-shell" morphology, with the silica sol forming a well-defined monolayer surrounding the nanocomposite cores. Thus these ESI results provide direct verification of the two types of nanocomposite morphologies that were previously only inferred on the basis of X-ray photoelectron spectroscopy and aqueous electrophoresis studies. Moreover, ESI also allows the unambiguous identification of a minor population of polystyrene/silica nanocomposite particles that are not encapsulated by silica shells. The existence of this second morphology was hitherto unsuspected, but it is understandable given the conditions employed to synthesize these nanocomposites. It appears that ESI is a powerful technique for the characterization of colloidal nanocomposite particles.

Synthesis of vinyl polymer-silica colloidal nanocomposites prepared using commercial alcoholic silica sols

The surfactant-free synthesis of vinyl polymer-silica nanocomposite particles has been achieved in aqueous alcoholic media at ambient temperature in the absence of auxiliary comonomers. Styrene, methyl methacrylate, methyl acrylate, n-butyl acrylate, and 2-hydroxypropyl methacrylate were homopolymerized in turn in the presence of three commercially available ultrafine alcoholic silica sols. Stable colloidal dispersions with reasonably narrow size distributions were obtained, with silica contents of up to 58% by mass indicated by thermogravimetric analysis. Particle size distributions were assessed using both dynamic light scattering and disk centrifuge photosedimentometry. The former technique indicated that the particle size increased for the first 1-2 h at 25 degrees C and thereafter remained constant. Particle morphologies were studied using electron microscopy. Most of the colloidal nanocomposites comprised approximately spherical particles with relatively narrow size distributions, but in some cases more polydisperse or nonspherical particles were obtained. Selected acrylate-based nanocomposites were examined in terms of their film formation behavior. Scanning electron microscopy studies indicated relatively smooth films were obtained on drying at 20 degrees C, with complete loss of the original particle morphology. The optical clarity of solution-cast 10 microm nanocomposite films was assessed using visible absorption spectrophotometry, with 93-98% transmission being obtained from 400 to 800 nm; the effect of long-term immersion of such films in aqueous solutions was also examined. X-ray photoelectron spectroscopy studies indicated that the surface compositions of these nanocomposite particles are invariably silica-rich, which is consistent with their long-term colloidal stability and also with aqueous electrophoresis measurements. FT-IR studies suggested that in the case of the poly(methyl methacrylate)-silica nanocomposite particles, the carbonyl ester groups in the polymer are hydrogen-bonded to the surface silanol groups. According to differential scanning calorimetry studies, the glass transition temperatures of several poly(methyl methacrylate)-silica and polystyrene-silica nanocomposites can be either higher or lower than those of the corresponding homopolymers, depending on the nature of the silica sol.

Titania-coated polystyrene hybrid microballs prepared with miniemulsion polymerization

Hybrid microballs with polystyrene cores coated by titania nanoparticles were prepared in miniemulsion polymerization. Acrylic acid was used as a comonomer to promote locating titania nanoparticles on the polymer's surface. The addition of a hydrophobic agent effectively prevents monomer diffusing into the aqueous phase. The morphology of hybrid particles was examined with the transmission electron microscope, and its change pattern with reactive conditions was observed. The infrared spectra of hybrid nanoparticles showed that there existed a certain interaction between titania nanoparticles and polymers. The crystallization morphology of hybrid particles before and after calcination was characterized with X-ray diffraction.