Direct nanocomposite of crystalline TiO2 particles and mesoporous silica as a molecular selective and highly active photocatalyst

Selective removal of sulfamethoxazole by a novel double Z-scheme photocatalyst: Preferential recognition and degradation mechanism

Sulfamethoxazole (SMX) is a significant environmental concern due to its adverse effects and ecological risks. SMX elimination in aquatic environments via photocatalysis presents a viable solution, given its high oxidation potential. However, such a solution remains controversial, primarily due to a lack of selectivity. Here we introduce a molecularly imprinted TiO2@Fe2O3@g-C3N4 (MFTC) photocatalyst designed for the selective degradation of SMX. To assess MFTC's selectivity, we applied it to degrade synthetic wastewater containing SMX alongside interfering species sulfadiazine (SDZ), ibuprofen (IBU), and bisphenol A (BPA). The results demonstrated a selective degradation efficiency rate of 96.8%, nearly twice that of competing pollutants. The molecularly imprinted sites within the catalyst played a crucial role by selectively capturing SMX and enhancing its adsorption, thereby improving catalytic efficiency. The degradation process involved •OH and •O2- free radicals, with a newly proposed double Z-scheme mechanism and potential pathway for SMX degradation by the MFTC photocatalytic system. This study enriches the application of photocatalysis using molecularly imprinted nanocomposite materials for treating complex pollutant mixtures in water.

Nanohybrid catalysts with porous structures for environmental remediation through photocatalytic degradation of emerging pollutants

Water supplies have been seriously challenged by new emerging pollutants, which are difficult to remove by traditional wastewater treatment. Thus, new technologies such as catalytic advanced oxidation processes have merged as suitable solutions; however, the drawbacks of typical catalysts limit their application. To overcome this issue, new materials with enhanced textural properties have been developed, showing that their porosity and chemical nature influence their potential as a catalyst. Herein, the recent progress in highly porous catalysts and their suitable deployment to effectively nano-remediate the polluted environmental matrices are reviewed in detail. First, following a brief introduction, several environmental pollutants of emerging concerns from different sectors, including pharmaceutical residues, endocrine-disrupting chemicals (EDCs), pesticides, and hazardous dyes are also introduced with relevant examples. To effectively tackle the sustainable remediation of emerging pollutants, this work also focuses on the multifunctional features of nanohybrid porous materials that act as catalysts constructs to degrade emerging pollutants. The influence of surface reactive centers, stability, bandgap energies, light absorption capacities, and pollutants adsorption capacities are also discussed. Successful examples of the employment of nanohybrid porous catalysts for the degradation of pharmaceutical pollutants, EDCs, pesticides, and hazardous dyes are summarized. Finally, some challenges faced by nanohybrid porous materials to achieve their potential application as advanced catalysts for environmental remediation have been identified and presented herein.

Emergence of practical fluorescence in a confined space of nanoporous silica: significantly enhanced quantum yields of a conjugated molecule

The fluorescence of benzanthrone, which is a conjugated molecule bearing a carbonyl group, is activated by confinement in a pore with a diameter close to the molecular size. An intense emission originating from the aromatic character π-π* transition is achieved through suppression of the nonradiative n-π* transition by strong hydrogen bonding between carbonyl groups and silanol groups with a micropore-filling effect in the nanospace.

Occurrence, potential ecological risks, and degradation of endocrine disrupter, nonylphenol, from the aqueous environment

Nonylphenol (NP) is considered a potential endocrine-disrupting chemical affecting humans and the environment. Due to widespread occurrence in the aquatic environment and neuro-, immuno, reproductive, and estrogenic effects, nonylphenol calls for considerable attention from the scientific community, researchers, government officials, and the public. It can persist in the environment, especially soil, for a long duration because of its high hydrophobic nature. Nonylphenol is incorporated into the water matrices via agricultural run-off, wastewater effluents, agricultural sources, and groundwater leakage from the soil. In this regard, assessment of the source, fate, toxic effect, and removal of nonylphenol seems a high-priority concern. Remediation of nonylphenol is possible through physicochemical and microbial methods. Microbial methods are widely used due to ecofriendly in nature. The microbial strains of the genera, Sphingomonas, Sphingobium, Pseudomonas, Pseudoxanthomonas, Thauera, Novosphingonium, Bacillus, Stenotrophomonas, Clostridium, Arthrobacter, Acidovorax, Maricurvus, Rhizobium, Corynebacterium, Rhodococcus, Burkholderia, Acinetobacter, Aspergillus, Pleurotus, Trametes, Clavariopsis, Candida, Phanerochaete, Bjerkandera, Mucor, Fusarium and Metarhizium have been reported for their potential role in the degradation of NP via its metabolic pathway. This study outlines the recent information on the occurrence, origin, and potential ecological and human-related risks of nonylphenol. The current development in the removal of nonylphenol from the environment using different methods is discussed. Despite the significant importance of nonylphenol and its effects on the environment, the number of studies in this area is limited. This review gives an in-depth understanding of NP occurrence, fate, toxicity, and remediation from the environments.

Heterostructural transformation of mesoporous silica-titania hybrids

Mesoporous silica (SBA-15 with the BJH pore size of 8 nm) containing anatase nanoparticles in the pore with two different titania contents (28 and 65 mass%), which were prepared by the infiltration of the amorphous precursor derived from tetraisopropyl orthotitanate into the pore, were heat treated in air to investigate the structural changes (both mesostructure of the SBA-15 and the phase and size of the anatase in the pore). The mesostructure of the mesoporous silica and the particle size of anatase unchanged by the heat treatment up to 800 °C. The heat treatment at the temperature higher than 1000 °C resulted in the collapse of the mesostructure and the growth of anatase nanoparticles as well as the transformation to rutile, while the transformation of anatase to rutile was suppressed especially for the sample with the lower titania content (28 mass%). The resulting mesoporous silica-anatase hybrids exhibited higher benzene adsorption capacity (adsorption from water) over those heated at lower temperature, probably due to the dehydroxylation of the silanol group on the pore surface. The photocatalytic decomposition of benzene in water by the present hybrid heated at 1100 °C was efficient as that by P25, a benchmark photocatalyst.

Preferential immobilization of size-controlled anatase nanoparticles in mesopores

Precise structural design of a host-guest complex was carried out from the aspects of the size and the location of the guest (anatase particles), and the remaining open space of the host (mesoporous silica). The size of the anatase particles was successfully controlled (3, 5 and 8 nm) during the preparation, and the size-controlled nanoparticles were preferentially encapsulated into the mesopores with a diameter of 8 nm. Due to the precise control of the anatase particles, size dependent photoluminescence of the anatase quantum dots was observed for the first time. The change in the porosity of the mesoporous silica by the immobilization of the anatase in the pore was followed to find a systematic variation of the porosity corresponding to the loaded anatase amount. This correlation can be useful to estimate the location of the guest in/on the host for the host-guest hybrids.

Paving the Way for A Sustainable and Efficient SiO2/TiO2 Photocatalytic Composite

Although photocatalysis is an extraordinary and tremendously explored topic, there is a need to find new ways to encourage the production of composite materials that are economical, efficient and with limited environmental impact. Nanocatalysts may benefit from appropriate support material for many reasons. In this study, TiO2 was deposited on SiO2, so that the silica not only provides the macroscopic structure on which the TiO2 is formed, but it positively affects the photocatalytic activity as well. This is because of the greater specific surface area which favors the adsorption of pollutants near the photocatalyst, the higher amount of surface-adsorbed water and hydroxyl groups and the inhibition of the photogenerated electron-hole recombination. The choice of preparing the Ti-precursor starting from titanium shavings and to directly deposit TiO2 on micrometric-sized silica by a simple hydrothermal method highlights the process sustainability. The results showed that it is possible to produce a photocatalytic composite from secondary materials, exhibiting excellent photocatalytic properties, comparable to the pristine one, and opening the possibility for large-scale production.

Influence of Surface-Related Phenomena on Mechanism, Selectivity, and Conversion of TiO2 -Induced Photocatalytic Reactions

Heterogeneous photocatalysis is the result of an inextricable connection of several factors differently contributing to the overall process. Photon absorption is the "sine qua non" condition for the reaction to occur. In fact, photons can be considered as immaterial reactants, and all of the phenomena related to the interaction of light-matter play a prominent role. However, other factors contribute in a concerted way to address the reaction, so that the relative contribution of each of them is often difficult to evaluate. In this framework, the present paper highlights some aspects of the interaction of TiO₂ surface-adsorbate species that could be underestimated and their influence on the conversion, selectivity, and mechanisms of photocatalytic reactions. To this aim, some paradigmatic examples on the adsorption of water and organics on TiO₂ are reported.

Selective Fenton-like oxidation of methylene blue on modified Fe-zeolites prepared via molecular imprinting technique

A facile strategy to increase the selectivity of heterogeneous Fenton oxidation is investigated. The increase was reached by increasing selective adsorption of heterogeneous Fenton catalyst to a target pollutant. The heterogeneous Fenton catalyst was prepared by a two-step process. First, zeolite particles were imprinted by the target pollutant, methylene blue (MB), in their aggregations, and second, iron ions were loaded on the zeolite aggregations to form the molecule imprinted Fe-zeolites (MI-FZ) Fenton catalyst. Its adsorption amount for MB reached as high as 44.6 mg g^-1 while the adsorption amount of un-imprinted Fe-zeolites (FZ) is only 15.6 mg g^-1. Fenton removal efficiency of MI-FZ for MB was 87.7%, being 33.9% higher than that of FZ. The selective Fenton oxidation of MI-FZ for MB was further confirmed by its removal performance for the mixed MB and bisphenol A (BPA) in solution. The removal efficiency of MB was 44.7% while that of BPA was only 14.9%. This fact shows that molecular imprinting is suitable to prepare the Fe-zeolites (FZ)-based Fenton catalyst with high selectivity for removal of target pollutants, at least MB.

Anatase TiO2 nanoparticle coating on porous COK-12 platelets as highly active and reusable photocatalysts

Coating of anatase TiO₂ nanoparticles on ordered mesoporous silica COK-12 platelets for effective photodegradation of various organic pollutants under UV light irradiation.

Metal-organic framework composites with luminescent gold(iii) complexes. Strongly emissive and long-lived excited states in open air and photo-catalysis

The encapsulation of luminescent gold(iii) complexes by metal-organic frameworks (MOFs) lays the groundwork for new phosphorescent materials with activities that are not readily achieved by the host MOF materials or gold(iii) complexes alone. In this work, strong phosphorescence with lifetimes of up to ∼50 μs in open air at room temperature has been achieved by incorporation of cationic cyclometalated gold(iii) complexes into MOFs with anionic frameworks to form AuIII@MOFs. The AuIII@MOFs display solid state two-photon-induced phosphorescence. Photo-reduction of methyl viologen to the reduced radical was achieved inside AuIII@MOFs and in the presence of Et3N upon excitation at λ > 370 nm under ambient conditions. These AuIII@MOFs comprise a class of reusable and size-selective heterogeneous photo-catalysts for the aerobic oxidation of secondary amines to imines as well as five other reactions, including oxidative C-H functionalization under aerobic conditions.

Alcohol-Selective Oxidation in Water under Mild Conditions via a Novel Approach to Hybrid Composite Photocatalysts

The oxidation of alcohols to carbonyl compounds in a clean fashion (i.e., with water as a solvent or under solvent‐free conditions, and using O₂ or H₂O₂ as the primary oxidant) is the subject of considerable research efforts. A new approach for the selective oxidation of soluble aromatic alcohols in water under mild conditions via a novel composite photocatalyst has been developed. The catalyst is synthesized by grafting 4‐(4‐(4‐hydroxyphenylimino)cyclohexa‐2,5dienylideneamino)phenol and silver nanoparticles onto the surface of moderately crystalline titanium dioxide. The titanium dioxide‐based composite was first extensively characterized and then employed in the catalytic oxidation of 4‐methoxybenzyl alcohol to 4‐methoxybenzaldehyde under UV irradiation in water at room temperature. The corresponding aldehyde was obtained with unprecedented high selectivity (up to 86 %). The method is general and opens the route to fabrication of photocatalytic composites based on titanium dioxide functionalized with shuttle organic molecules and metal nanoparticles for a variety of oxidative conversions.

Rapid removal and decomposition of gaseous acetaldehyde by the thermo- and photo-catalysis of gold nanoparticle-loaded anatase titanium(IV) oxide

Gold nanoparticles (NPs) with a mean particle size ranging from 2.1 to 7.4 nm were loaded on anatase TiO2 particles (Au/TiO2) by the heating temperature-varied deposition precipitation technique. This study has shown that Au/TiO2 with Au particle size <3 nm and TiO2 surface area >50 m(2) g(-1) can be a promising environmental catalyst for the rapid removal and decomposition of gaseous acetaldehyde in a closed space. The Au loading on TiO2 causes a drastic enhancement of the acetaldehyde adsorption in the dark, and the adsorption amount increases as the Au particle size decreases. This result originates from the thermocatalytic activity of Au/TiO2 for the oxidation of acetaldehyde to acetic acid under ambient conditions. The resulting acetic acid spontaneously moves to the TiO2 surface due to the great adsorptivity for the carboxyl group. Consequently, the acetaldehyde adsorption amount strongly depends on the TiO2 surface area in addition to the Au particle size. UV-light irradiation of acetaldehyde (or acetate)-adsorbed Au/TiO2 leads to the complete decomposition to carbon dioxide by the high photocatalytic activity of anatase TiO2.

Complete hydrogen release from aqueous ammonia-borane over a platinum-loaded titanium dioxide photocatalyst

Complete H₂ release from ammonia-borane in water was achieved by using Pt/TiO₂via two consecutive reaction steps.

Enhanced photocatalytic activity of Pt/WO3photocatalyst combined with TiO2nanoparticles by polyelectrolyte-mediated electrostatic adsorption

An electrostatic adsorption approach was used to realize a composite structure in which larger WO₃crystalline particles were surrounded by TiO₂nanoparticles. The Pt/WO₃–TiO₂composite photocatalyst showed a high activity under visible light irradiation (λ> 420 nm).

Topotactic growth, selective adsorption, and adsorption-driven photocatalysis of protonated layered titanate nanosheets

Layered titanates with selective adsorption ability and adsorption-driven photocatalytic property can be quite attractive due to their potential applications in water purification. In this work, lepidocrocite-like layered protonated titanate (H2Ti2O5·H2O, denoted as HTO) nanosheets were successfully synthesized by an ion-exchange process. It turns out that this layered structure displays an abundant and selective adsorption toward the fluoroquinolone pharmaceutical compared with some large dye molecules due to a size selectivity of the interlayer spacing of HTO and the molecular horizontal size, as well as their electrostatic interaction. The uptake ability of HTO could be readily controlled through adjusting the pH values of adsorbate solution, and the maximum uptake capacity was achieved at the pH value of about 5.5 for ciprofloxacin (CIP) and 6.5 for moxifloxacin (MOX). The adsorption amount of smaller nalidixic acid (NAL) showed an increasing tendency as the pH value decreased. Moreover, the two-dimensional layered crystal structure also permits such HTO nanosheets to have a large percentage of (010) faces exposed, which is considerably provided by the interlayer surfaces of these nanosheets. The (010) surface has a similar Ti and O atomic arrangement as to the highly reactive anatase TiO2(001) one. Due to these specific characteristics, these HTO nanosheets show excellent photocatalytic activity in degrading CIP under UV light irradiation as well as possess a superior adsorption ability to remove CIP from aqueous solution selectively and efficiently. The photocatalytic reaction is believed to be mainly conducted on the active anatase (001)-like interlayer (010) surfaces of the layered structures since the as-prepared HTO performs an adsorption-driven molecular recognitive photocatalytic reaction.

Design of composite photocatalyst of TiO2 and Y-zeolite for degradation of 2-propanol in the gas phase under UV and visible light irradiation

Hydrophobic Y-zeolite (SiO₂/Al₂O₃ = 810) and TiO₂ composite photocatalysts were designed by using two different types of TiO₂ precursors, i.e., titanium ammonium oxalate and ammonium hexafluorotitanate. The porous structure, surface property and state of TiO₂ were investigated by various characterization techniques. By using an ammonium hexafluorotitanate as a precursor, hydrophobic modification of the Y-zeolite surface and realizing visible light sensitivity was successfully achieved at the same time after calcination at 773 K in the air. The prepared sample still maintained the porous structure of Y-zeolite and a large surface area. Highly crystalline anatase TiO₂ was also formed on the Y-zeolite surface by the role of fluorine in the precursor. The usages of ammonium hexafluorotitanate were effective for the improvement of the photocatalytic performance of the composite in the degradation of 2-propanol in the gas phase under UV and visible light (λ > 420 nm) irradiation.

Luffa-sponge-like glass-TiO2 composite fibers as efficient photocatalysts for environmental remediation

Structural design of photocatalysts is of great technological importance for practical applications. A rational design of architecture can not only promote the synthetic performance of photocatalysts but also bring convenience in their application procedure. Nanofibers have been established as one of the most ideal architectures of photocatalysts. However, simultaneous optimization of the photocatalytic efficiency, mechanical strength, and thermal/chemical tolerance of nanofibrous photocatalysts remains a big challenge. Here, we demonstrate a novel design of TiO2-SiO2 composite fiber as an efficient photocatalyst with excellent synthetic performance. Core-shell mesoporous SiO2 fiber with high flexibility was employed as the backbone for supporting ultrasmall TiO2 nanowhiskers of the anatase phase, constructing core@double-shell fiber with luffa-sponge-like appearance. Benefitting from their continuously long fibrous morphology, highly porous structure, and completely inorganic nature, the TiO2-SiO2 composite fibers simultaneously possess high photocatalytic reactivity, good flexibility, and excellent thermal and chemical stability. This novel architecture of TiO2-SiO2 glass composite fiber may find extensive use in the environment remediation applications.

Facile one-step synthesis of inorganic-framework molecularly imprinted TiO2/WO3 nanocomposite and its molecular recognitive photocatalytic degradation of target contaminant

Inorganic-framework molecularly imprinted TiO2/WO3 nanocomposites with molecular recognitive photocatalytic activity were first prepared successfully by a facile one-step sol-gel method using 2-nitrophenol and 4-nitrophenol as template molecules, and tetrabutyl orthotitanate as titanium source as well as the precursor of functional monomer which could complex with template molecules. The template molecules could be completely removed by means of high-temperature calcination, avoiding the traditional extraction procedures that are time- as well as solvent-consuming. Compared to nonimprinted TiO2/WO3, the molecularly imprinted TiO2/WO3 shows a much higher adsorption capacity and selectivity toward the template molecules. The enhancement in terms of adsorption capacity and selectivity can be attributed to the chemical interaction between target molecules and imprinted cavities, as well as size matching between imprinted cavities and target molecules. The photocatalytic activity of molecularly imprinted TiO2/WO3 toward the target molecules is more than two times that of non-imprinted TiO2/WO3, a result of selective adsorption of target molecules on molecularly imprinted TiO2/WO3. The formation pathway of intermediate products in 2-nitrophenol and 4-nitrophenol degradation process was provided. Moreover, molecularly imprinted TiO2/WO3 exhibits high stability. The results indicate that inorganic-framework molecularly imprinted TiO2/WO3 nanocomposites have a promising prospect in the treatment of wastewater for irrigation.

Titania/CnTAB Nanoskeleton as adsorbent and photocatalyst for removal of alkylphenols dissolved in water

We report here on the removal of alkylphenols (phenol, 4-n-propylphenol, 4-n-heptylphenol and 4-nonylphenol) dissolved in water using the composite particles of nanocrystalline titania and alkyltrimethylammonium bromide (CnH2n+1N(CH3)3Br, CnTAB; n=12, 14, 16 and 18) (named as TiO2/CnTAB Nanoskeleton) as adsorbents and photocatalysts. In particular, the adsorption of alkylphenols onto TiO2/CnTAB Nanoskeleton in water was investigated in terms of hydrophobic interaction between alkylphenols and CnTAB, surface area, pore structure and crystal size of TiO2/CnTAB Nanoskeleton. We revealed that CnTAB incorporated in the TiO2/CnTAB Nanoskeleton promotes the adsorption of alkylphenols onto TiO2/CnTAB Nanoskeleton due to the hydrophobic interaction between alkylphenols and CnTAB. On the other hand, the surface area, pore structure and crystal size of TiO2/CnTAB Nanoskeleton did not affect the adsorption of alkylphenols onto TiO2/CnTAB Nanoskeleton. We also found that the alkylphenols dissolved in water were completely removed by the combination of adsorption and photocatalytic degradation by the TiO2/CnTAB Nanoskeleton under UV irradiation. These results prove that the TiO2/CnTAB Nanoskeleton acts as in tandem an adsorbent and a photocatalyst for removal of alkylphenols dissolved in water.

Selective photocatalytic degradation of aquatic pollutants by titania encapsulated into FAU-type zeolites

The selective photocatalytic degradation of charged pollutants in water was achieved on titania encapsulated into FAU-type zeolites. The electrostatic attraction of cationic substrates and repulsion of anionic substrates by the negatively charged zeolite framework facilitated the selective photocatalytic degradation of charged substrates. The hybrid zeolite-titania photocatalysts were prepared through the ion-exchange method. The titania clusters were mainly well distributed within the cavities of FAU-type zeolites whereas no TiO(2) nanoparticles aggregates were observed on the external surface of zeolite crystals. The hybrid zeolite-titania photocatalysts were characterized by diffuse reflectance UV-visible spectroscopy, transmission electron microscopy, energy-dispersive X-ray analysis and X-ray photoelectron spectroscopy. The selective degradation of charged pollutants was investigated by employing three pairs of oppositely charged substrates. The comparison between the cationic and anionic substrates clearly showed that the degradation rates for the cationic substrates on the hybrid photocatalysts are markedly higher than those for the anionic substrates. Among the cationic substrates, the smaller cations such as tetramethylammoniums were preferentially degraded. This enabled the selective removal of cationic substrates among the mixture. Such a selective photocatalytic degradation of water pollutants may provide a useful strategy for the development of economical photocatalytic process by targeting only the most recalcitrant pollutant.

Nonylphenol, octylphenol, and bisphenol-A in the aquatic environment: a review on occurrence, fate, and treatment

This paper reviews the current knowledge on the occurrence, biodegradation, and photooxidation of nonylphenol (NP), octylphenol (OP), and bisphenol-A (BPA) in aquatic environment. Generally, the concentrations determined were 0.006-32.8, < 0.001-1.44, and 0.0005-4.0 mu g L(-1) for NP, OP, and BPA respectively in river waters worldwide. Anthropogenic activities that can lead to run-off and storm water discharge may contribute to such concentrations in rivers. Pathways for biodegradation of NP and BPA appear to be similar. The influence of ferric ions, oxalate, hydrogen peroxide, and dissolved organic matter (DOM) on the photooxidation of NP and BPA in natural water is presented. Several techniques including nanofiltration, adsorption, sonochemical, photocatalytic, chlorination, ozonation, and ferrate(VI) oxidation for removals of NP, OP, and BPA are also reviewed.