Tailor-Made Gold Nanomaterials for Applications in Soft Bioelectronics and Optoelectronics

In modern nanoscience and nanotechnology, gold nanomaterials are indispensable building blocks that have demonstrated a plethora of applications in catalysis, biology, bioelectronics, and optoelectronics. Gold nanomaterials possess many appealing material properties, such as facile control over their size/shape and surface functionality, intrinsic chemical inertness yet with high biocompatibility, adjustable localized surface plasmon resonances, tunable conductivity, wide electrochemical window, etc. Such material attributes have been recently utilized for designing and fabricating soft bioelectronics and optoelectronics. This motivates to give a comprehensive overview of this burgeoning field. The discussion of representative tailor-made gold nanomaterials, including gold nanocrystals, ultrathin gold nanowires, vertically aligned gold nanowires, hard template-assisted gold nanowires/gold nanotubes, bimetallic/trimetallic gold nanowires, gold nanomeshes, and gold nanosheets, is begun. This is followed by the description of various fabrication methodologies for state-of-the-art applications such as strain sensors, pressure sensors, electrochemical sensors, electrophysiological devices, energy-storage devices, energy-harvesting devices, optoelectronics, and others. Finally, the remaining challenges and opportunities are discussed.

Advancements in mercury detection using surface-enhanced Raman spectroscopy (SERS) and ion-imprinted polymers (IIPs): a review

Mercury (Hg) contamination remains a major environmental concern primarily due to its presence at trace levels, making monitoring the concentration of Hg challenging. Sensitivity and selectivity are significant challenges in the development of mercury sensors. Surface-enhanced Raman spectroscopy (SERS) and ion-imprinted polymers (IIPs) are two distinct analytical methods developed and employed for mercury detection. In this review, we provide an overview of the key aspects of SERS and IIP methodologies, focusing on the recent advances in sensitivity and selectivity for mercury detection. By examining the critical parameters and challenges commonly encountered in this area of research, as reported in the literature, we present a set of recommendations. These recommendations cover solid and colloidal SERS substrates, appropriate Raman reporter/probe molecules, and customization of IIPs for mercury sensing and removal. Furthermore, we provide a perspective on the potential integration of SERS with IIPs to achieve enhanced sensitivity and selectivity in mercury detection. Our aim is to foster the establishment of a SERS-IIP hybrid method as a robust analytical tool for mercury detection across diverse fields.

Flexible PDMS-Based SERS Substrates Replicated from Beetle Wings for Water Pollutant Detection

The flexible surface-enhanced Raman scattering (SERS) sensor, which has the bionic 3D nanoarray structure of a beetle-wing substrate (BWS), was successfully prepared by replicated technology and thermal evaporation. The bionic structure was replicated with polydimethylsiloxane (PDMS) and then silver (Ag) nanoisland thin films were deposited by thermal evaporation. The deposition times and thicknesses (25-40 nm) of the Ag thin films were manipulated to find the optimal SERS detection capability. The Ag nanoisland arrays on the surface of the bionic replicated PDMS were observed by scanning electron microscope (SEM), X-ray diffraction (XRD), and contact angle, which can generate strong and reproducible three-dimensional hotspots (3D hotspots) to enhance Raman signals. The water pollutant, rhodamine 6G (R6G), was used as a model molecule for SERS detection. The results show that 35 nm Ag deposited on a PDMS-BWS SERS substrate displays the strongest SERS intensity, which is 10 times higher than that of the pristine BWS with 35 nm Ag coating, due to the excellent 3D bionic structure. Our results demonstrate that bionic 3D SERS sensors have the potential to be applied in wearable devices and sensors to detect biomolecules and environmental pollutants, such as industrial wastewater, in the future.

Gold Nanocone Array with Extensive Electromagnetic Fields for Highly Reproducible Surface-Enhanced Raman Scattering Measurements

Surface-enhanced Raman scattering (SERS) is a technique used to distinguish the constitution of disease-related biomarkers in liquid biopsies, such as exosomes and circulating tumor cells, without any recognition elements. Previous studies using metal nanoparticle aggregates and angular nanostructures have achieved the detection of various biomarkers owing to strong hot spots and electromagnetic (EM) fields by localized surface plasmon resonance (LSPR). Although these SERS platforms enable significant enhancement of Raman signals, they still have some problems with the fabrication reproducibility of platforms in obtaining reproducible SERS signals. Therefore, highly reproducible fabrication of SERS platforms is required. Here, we propose the application of a polymer-based gold (Au) nanocone array (Au NCA), which extensively generates an enhanced EM field near the Au NCA surface by LSPR. This approach was experimentally demonstrated using a 785 nm laser, typically used for SERS measurements, and showed excellent substrate-to-substrate reproducibility (relative standard deviation (RSD) < 6%) using an extremely simple fabrication procedure and very low laser energy. These results proved that a Au NCA can be used as a highly reproducible SERS measurement to distinguish the constitution of biomarkers.

Bimetallic Ag-Au alloy nanocubes for SERS based sensitive detection of explosive molecules

We have fabricated Ag-Au alloy nanocubes using the galvanic replacement of silver nanocubes by aqueous HAuCl₄ and investigated their morphological, structural, compositional and optical properties. The inter-diffusion between silver and gold at 100 °C leads to the formation of Ag-Au alloy nanocubes with hollow interiors. A broad tuning of the surface plasmon resonance (SPR) wavelength from 624 nm to 920 nm is obtained with the varying volume of HAuCl₄. When excited at wavelength 785 nm, the bimetallic Ag-Au nanocubes with pinholes exhibit two-fold Raman intensity enhancement compared to pristine Ag nanocubes. The surface-enhanced Raman spectroscopy (SERS) substrate prepared with Ag-Au alloy nanocubes shows high-intensity enhancement factor of 1.9 × 10⁷ for 11.2 wt% Au content. The SERS-active Ag-Au alloy nanocubes substrates were exploited for the detection of two explosive molecules; p-nitrobenzoic acid (PNBA) and picric acid (PA). Remarkable detection sensitivity and ultra-low detection limit of 1.7 × 10^-14 M for PNBA and 4.1 × 10^-11 M for PA were obtained, demonstrating the very high SERS detection capabilities of the as-prepared substrate.

Exploring High Aspect Ratio Gold Nanotubes as Cytosolic Agents: Structural Engineering and Uptake into Mesothelioma Cells

The generation of effective and safe nanoagents for biological applications requires their physicochemical characteristics to be tunable, and their cellular interactions to be well characterized. Here, the controlled synthesis is developed for preparing high-aspect ratio gold nanotubes (AuNTs) with tailorable wall thickness, microstructure, composition, and optical characteristics. The modulation of optical properties generates AuNTs with strong near infrared absorption. Surface modification enhances dispersibility of AuNTs in aqueous media and results in low cytotoxicity. The uptake and trafficking of these AuNTs by primary mesothelioma cells demonstrate their accumulation in a perinuclear distribution where they are confined initially in membrane-bound vesicles from which they ultimately escape to the cytosol. This represents the first study of the cellular interactions of high-aspect ratio 1D metal nanomaterials and will facilitate the rational design of plasmonic nanoconstructs as cytosolic nanoagents for potential diagnosis and therapeutic applications.

Gold nanotubes: synthesis, properties and biomedical applications

This review (with 106 references) summarizes the latest progress in the synthesis, properties and biomedical applications of gold nanotubes (AuNTs). Following an introduction into the field, a first large section covers two popular AuNTs synthesis methods. The hard template method introduces anodic alumina oxide template (AAO) and track-etched membranes (TeMs), while the sacrificial template method based on galvanic replacement introduces bimetallic, trimetallic AuNTs and AuNT-semiconductor hybrid materials. Then, the factors affecting the morphology of AuNTs are discussed. The next section covers their unique surface plasmon resonance (SPR), surface-enhanced Raman scattering (SERS) and their catalytic properties. This is followed by overviews on the applications of AuNTs in biosensors, protein transportation, photothermal therapy and imaging. Several tables are presented that give an overview on the wealth of synthetic methods, morphology factors and biological application. A concluding section summarizes the current status, addresses current challenges and gives an outlook on potential applications of AuNTs in biochemical detection and drug delivery.Graphical abstract.

Multicolor Cocktail for Breast Cancer Multiplex Phenotype Targeting and Diagnosis Using Bioorthogonal Surface-Enhanced Raman Scattering Nanoprobes

Early precise diagnosis of cancers is crucial to realize more effective therapeutic interventions with minimal toxic effects. Cancer phenotypes may also alter greatly among patients and within individuals over the therapeutic process. The identification and characterization of specific biomarkers expressed on tumor cells are in high demand for diagnosis and treatment, but they are still a challenge. Herein, we designed three new bioorthogonal surface-enhanced Raman scattering (SERS) nanoprobes and successfully applied the cocktail of them for MDA-MB-231 and MCF-7 breast cancer multiplex phenotype detection. The SERS nanoprobes containing Raman reporters with diynl, azide, or cyano moieties demonstrated apparent Raman shift peaks in 2205, 2120, and 2230 cm-1, respectively, in the biologically Raman-silent region. Three target ligands, including oligonucleotide aptamer (AS1411), arginine-glycine-aspatic acid (RGD) peptide, and homing cell adhesion molecule antibody (anti-CD44), were separately conjugated to the nanoprobes for active recognition capability. The cocktail of the nanoprobes manifested minimal cytotoxicity and simultaneously multiplex phenotype imaging of MDA-MB-231 and MCF-7 cells. Quantitative measurement of cellular uptake by inductively coupled plasma mass spectrometry (ICPMS) verified that MDA-MB-231 cells harbored a much higher expression level of CD44 receptor than MCF-7 cells. For in vivo SERS detection, Raman shift peaks of 2120, 2205, and 2230 cm-1 in the micro-tumor were clearly observed, representing the existence of three specific biomarkers of nucleolin, integrin αvβ3, and CD44 reporter, which could be used for early cancer phenotype identification. The biodistribution results indicated that target ligand modified nanoprobes exhibited much more accumulation in tumors than those nanoprobes without target ligands. The multicolor cocktail of bioorthogonal SERS nanoprobes offers an attractive and insightful strategy for early cancer multiplex phenotype targeting and diagnosis in vivo that is noninvasive and has low cross-talk, unique spectral-molecular signature, high sensitivity, and negligible background interference.

Recent Advances in 2D Inorganic Nanomaterials for SERS Sensing

Surface-enhanced Raman spectroscopy is a powerful and sensitive analytical tool that has found application in chemical and biomolecule analysis and environmental monitoring. Since its discovery in the early 1970s, a variety of materials ranging from noble metals to nanostructured materials have been employed as surface enhanced Raman scattering (SERS) substrates. In recent years, 2D inorganic materials have found wide use in the development of SERS-based chemical sensors owing to their unique thickness dependent physico-chemical properties with enhanced chemical-based charge-transfer processes. Here, recent advances in the application of various 2D inorganic nanomaterials, including graphene, boron nitride, semiconducting metal oxides, and transition metal chalcogenides, in chemical detection via SERS are presented. The background of the SERS concept, including its basic theory and sensing mechanism, along with the salient features of different nanomaterials used as substrates in SERS, extending from monometallic nanoparticles to nanometal oxides, is comprehensively discussed. The importance of 2D inorganic nanomaterials in SERS enhancement, along with their application toward chemical detection, is explained in detail with suitable examples and illustrations. In conclusion, some guidelines are presented for the development of this promising field in the future.

One-Step Synthesis of Au-Ag Nanowires through Microorganism-Mediated, CTAB-Directed Approach

Synthesis and applications of one dimensional (1D) metal nanostructures have attracted much attention. However, one-step synthesis of bimetallic nanowires (NWs) has remained challenging. In this work, we developed a microorganism-mediated, hexadecyltrimethylammonium bromide (CTAB)-directed (MCD) approach to synthesize closely packed and long Au-Ag NWs with the assistance of a continuous injection pump. Characterization results confirmed that the branched Au-Ag alloy NWs was polycrystalline. And the Au-Ag NWs exhibited a strong absorbance at around 1950 nm in the near-infrared (NIR) region, which can find potential application in NIR absorption. In addition, the Au-Ag NWs showed excellent surface-enhanced Raman scattering (SERS) enhancement when 4-mercaptobenzoic acid (MBA) and rhodamine 6G (R6G) were used as probe molecules.

Silver nanowires as infrared-active materials for surface-enhanced Raman scattering

Surface-enhanced Raman scattering (SERS) is increasing in significance as a bioanalytical tool. Novel nanostructured metal substrates are required to improve performances and versatility of SERS spectroscopy. In particular, as biological tissues are relatively transparent in the infrared wavelength range, SERS-active materials suitable for infrared laser excitation are needed. Nanowires appear interesting in this respect as they show a very broad localized surface plasmon resonance band, ranging from near UV to near infrared wavelengths. The SERS activity of silver nanowires has been tested at three wavelengths and a fair enhancement at 1064 and 514 nm has been observed, whereas a very weak enhancement was present when exciting close to the nanowire extinction maximum. These experimentally measured optical properties have been contrasted with finite element method simulations. Furthermore, laser-induced optoacoustic spectroscopy measurements have shown that the extinction at 1064 nm is completely due to scattering. This result has an important implication that no heating occurs when silver nanowires are utilized as SERS-active substrates, thereby preventing possible thermal damage.

Highly effective and chemically stable surface enhanced Raman scattering substrates with flower-like 3D Ag-Au hetero-nanostructures

We demonstrated flower-like 3D Ag-Au hetero-nanostructures on an indium tin oxide glass (ITO glass) for surface enhanced Raman scattering (SERS) applications. The flower-like 3D Ag nanostructures were obtained through electrodeposition with liquid crystalline soft template which is simple, controllable and cost effective. The flower-like 3D Ag-Au hetero-nanostructures were further fabricated by galvanic replacement reaction of gold (III) chloride trihydrate (HAuCl4·3H2O) solution and flower-like Ag. The flower-like Ag-Au hetero-nanostructure exhibited stronger SERS effects and better chemical stability compared with flower-like Ag nanostructure. The localized surface plasmon resonance (LSPR) spectra, field emission scanning electron microscope (FESEM) photos and Ag-Au ratios were studied which show that the surface morphology and shape of the flower-like Ag-Au hetero-nanostructure play significant roles in enhancing SERS. The flower-like 3D Ag-Au hetero-nanostructures fabricated by electrodeposition in liquid crystalline template and galvanic replacement reaction are simple, cheap, controllable and chemical stable. It is a good candidate for applications in SERS detection and imaging.

LSPR Tuning from 470 to 800 nm and Improved Stability of Au-Ag Nanoparticles Formed by Gold Deposition and Rebuilding in the Presence of Poly(styrenesulfonate)

Stability and precise control over functional properties of metal nanoparticles remain a challenge for the realization of prospective applications. Our described process of shell formation and rebuilding can address both these challenges. Template silver nanoparticles (AgNPs) stabilized by poly(styrenesulfonate) are first transformed with gold deposition, after which the resulting shell rebuilds with the replaced silver. The shell formation and rebuilding are accompanied by large shifts in localized surface plasmon resonance (LSPR) peak position, which enables LSPR tuning in a range from 470 to 800 nm. Furthermore, chemical stability of Au-AgNPs is significantly improved compared to AgNPs due to gold stability. Silver templates of different shapes and sizes were demonstrated to transform to AuAg composite NPs to further extend the accessible LSPR range tuning. Stabilization of template AgNPs with poly(styrenesulfonate), in contrast to commonly used poly(vinylpyrrolidone), was found to be a key factor for shell rebuilding. The developed Au-AgNPs were shown to be advantageous for surface plasmon resonance (SPR) detection and surface-enhanced Raman spectroscopy (SERS) owing to their tunable LSPR and enhanced stability.

Site-Selective Controlled Dealloying Process of Gold-Silver Nanowire Array: a Simple Approach towards Long-Term Stability and Sensitivity Improvement of SERS Substrate

Limitations of achieving highly sensitive and stable surface-enhanced Raman scattering (SERS) substrate greatly concern the suitable method for fabrication of large-area plasmonic nanostructures. Herein we report a simple approach using template-based synthesis to create a highly ordered two-dimensional array of gold-silver alloy nanowires, followed by the controlled dealloying process. This particular step of mild acid etching (15%v/v nitric acid for 5 min) allowed the formation of Raman hot spots on the nanowire tips while maintaining the integrity of highly active alloy composition and rigid nanowire array structure. Full consideration of SERS substrate performance was accomplished using 4-mercaptobenzoic acid (4-MBA) as a probe molecule. Exceedingly higher SERS signal (150-fold) can be achieved with respect to typical gold film substrate. Moreover, an excellent stability of SERS substrate was also determined for over 3 months storage time. In contrast to the previous studies which stability improvement was accomplished at a cost of sensitivity reduction, the simultaneous improvement of sensitivity and stability makes the controlled dealloying process an excellent choice of SERS substrate fabrication. In addition, uniformity and reproducibility studies indicated satisfactory results with the acceptable values of relative standard deviation.

High-Yield Synthesis of Hollow Octahedral Silver Nanocages with Controllable Pack Density and Their High-Performance Sers Application

Nanoparticle-assembled octahedral Ag nanocages with sharp edges have been successfully synthesized through a Cu₂ O-based template-assisted strategy. In the reaction system, Ag nanoparticles can be self-assembled on the surface of Cu₂ O octahedrons, which is accomplished by the reduction of Ag⁺ by NaBH₄ in the presence of sodium citrate as a capping agent. The hollow octahedral Ag nanocages are obtained after removing the inner Cu₂ O cores with acetic acid. According to the scanning electron microscopy (SEM) and transmission electron microscopy characterization, the Ag nanocages are weaved by small nanoparticles, the rough surfaces are bestrewed with pores and sharp edges. It is found that the pack density of Ag nanoparticles strongly affects the surface enhanced Raman scattering (SERS) activities. The as-prepared 1.05-Ag cages with optimal pack density have suitable interparticle distance and suitable size of pores, which significantly enhance SERS signals. The SERS signals of rhodamine 6G (R6G) molecules can be detected at an ultralow concentration of 10^-14 m when 1.05-Ag cages are used as substrates. In addition to sensitivity, 1.05-Ag cages also exhibit good reproducibility. It is expected that the ultrahigh sensitivity will endow the Ag nanocages to become a promising candidate as high-performance SERS-based chemical sensor.

Rational design and synthesis of noble-metal nanoframes for catalytic and photonic applications

Nanoframes are unique for their 3D, highly open architecture. When made of noble metals, they are attractive for use as heterogeneous catalysts because of their large specific surface areas, high densities of catalytically active sites and low vulnerability toward sintering. They promise to enhance the catalytic activity and durability while reducing the material loading and cost. For nanoframes composed of Au and/or Ag, they also exhibit highly tunable plasmonic properties similar to those of nanorods. This article presents a brief account of recent progress in the design, synthesis and utilization of noble-metal nanoframes. We start with a discussion of the synthetic strategies, including those involving site-selected deposition and etching, as well as dealloying of both hollow and solid nanocrystals. We then highlight some of the applications enabled by noble-metal nanoframes. Finally, we discuss the challenges and trends with regard to future development.

Evaluation of Postharvest Washing on Removal of Silver Nanoparticles (AgNPs) from Spinach Leaves

There is increasing use of silver nanoparticles (AgNPs) as pesticides for fruits and vegetables due to the particles' unique antimicrobial and insecticidal properties. However, residual AgNPs in harvested produce may transfer through the food chain and pose a potential risk to public health. The objective of this study is to determine whether postharvest washing can effectively remove AgNPs that had accumulated on fresh produce. Ten microliters of commercially available 40 nm citrate coated AgNPs (0.4 mg/L) was dropped to a (1 × 1 cm(2)) spot on spinach leaves, followed by washing with deionized water (DI water), Tsunami 100 (80 mg/L), or Clorox bleach (200 mg/L). Then, the AgNP removal efficiency of the three treatments was evaluated by surface-enhanced Raman spectroscopy (SERS), scanning electron microscopy (SEM)-energy dispersive spectrometry (EDS), and inductively coupled plasma mass spectrometry (ICP-MS). ICP-MS results showed that deionized water removed statistically insignificant amounts of total Ag (5%), whereas Tsunami 100 and Clorox bleach yielded 21 and 10% decreases in total Ag, respectively (P < 0.05). The increased removal efficiency resulted from AgNP dissolution and Ag(+) release upon contact with the oxidizing agents in Tsunami 100 (peroxyacetic acid, hydrogen peroxide) and Clorox bleach (sodium hypochlorite). According to the SERS results, the deionized water and Tsunami 100 treatments removed nonsignificant amounts of AgNPs. Clorox bleach decreased Ag NPs by >90% (P < 0.05); however, SEM-EDS images revealed the formation of large silver chloride (AgCl) crystals (162 ± 51 nm) on the leaf, which explained the low total Ag removal from ICP-MS. This study indicates current factory washing methods for fresh produce may not be effective in reducing AgNPs (by water and Tsunami 100) and total Ag (by all three means). This highlights the necessity to develop an efficient washing method for NP removal from food surfaces in the future.

Analysis of temporal evolution of quantum dot surface chemistry by surface-enhanced Raman scattering

Temporal evolution of surface chemistry during oxidation of silicon quantum dot (Si-QD) surfaces were probed using surface-enhanced Raman scattering (SERS). A monolayer of hydrogen and chlorine terminated plasma-synthesized Si-QDs were spin-coated on silver oxide thin films. A clearly enhanced signal of surface modes, including Si-Clx and Si-Hx modes were observed from as-synthesized Si-QDs as a result of the plasmonic enhancement of the Raman signal at Si-QD/silver oxide interface. Upon oxidation, a gradual decrease of Si-Clx and Si-Hx modes, and an emergence of Si-Ox and Si-O-Hx modes have been observed. In addition, first, second and third transverse optical modes of Si-QDs were also observed in the SERS spectra, revealing information on the crystalline morphology of Si-QDs. An absence of any of the abovementioned spectral features, but only the first transverse optical mode of Si-QDs from thick Si-QD films validated that the spectral features observed from Si-QDs on silver oxide thin films are originated from the SERS effect. These results indicate that real-time SERS is a powerful diagnostic tool and a novel approach to probe the dynamic surface/interface chemistry of quantum dots, especially when they involve in oxidative, catalytic, and electrochemical surface/interface reactions.

Fabricating a Homogeneously Alloyed AuAg Shell on Au Nanorods to Achieve Strong, Stable, and Tunable Surface Plasmon Resonances

Colloidal metal nanocrystals with strong, stable, and tunable localized surface plasmon resonances (SPRs) can be useful in a corrosive environment for many applications including field-enhanced spectroscopies, plasmon-mediated catalysis, etc. Here, a new synthetic strategy is reported that enables the epitaxial growth of a homogeneously alloyed AuAg shell on Au nanorod seeds, circumventing the phase segregation of Au and Ag encountered in conventional synthesis. The resulting core-shell structured bimetallic nanorods (AuNR@AuAg) have well-mixed Au and Ag atoms in their shell without discernible domains. This degree of mixing allows AuNR@AuAg to combine the high stability of Au with the superior plasmonic activity of Ag, thus outperforming seemingly similar nanostructures with monometallic shells (e.g., Ag-coated Au NRs (AuNR@Ag) and Au-coated Au NRs (AuNR@Au)). AuNR@AuAg is comparable to AuNR@Ag in plasmonic activity, but that it is markedly more stable toward oxidative treatment. Specifically, AuNR@AuAg and AuNR@Ag exhibit similarly strong signals in surface-enhanced Raman spectroscopy that are some 30-fold higher than that of AuNR@Au. When incubated with a H(2)O(2) solution (0.5 m), the plasmonic activity of AuNR@Ag immediately and severely decayed, whereas AuNR@AuAg retained its activity intact. Moreover, the longitudinal SPR frequency of AuNR@AuAg can be tuned throughout the red wavelengths (≈620-690 nm) by controlling the thickness of the AuAg alloy shell. The synthetic strategy is versatile to fabricate AuAg alloyed shells on different shaped Au, with prospects for new possibilities in the synthesis and application of plasmonic nanocrystals.

Nanoimprinted Patterned Pillar Substrates for Surface-Enhanced Raman Scattering Applications

A pragmatic method to deposit silver nanoparticles on polydopamine-coated nanoimprinted pillars for use as surface-enhanced Raman scattering (SERS) substrates was developed. Pillar arrays consisting of poly(methyl methacrylate) (PMMA) that ranged in diameter from 300 to 500 nm were fabricated using nanoimprint lithography. The arrays had periodicities from 0.6 to 4.0 μm. A polydopamine layer was coated on the pillars in order to facilitate the reduction of silver ions to create silver nucleation sites during the electroless deposition of sliver nanoparticles. The size and density of silver nanoparticles were controlled by adjusting the growth time for the optimization of the SERS performance. The size of the surface-adhered nanoparticles ranged between 75 and 175 nm, and the average particle density was ∼30 particles per μm(2). These functionalized arrays had a high sensitivity and excellent signal reproducibility for the SERS-based detection of 4-methoxybenzoic acid. The substrates were also able to allow the SERS-based differentiation of three types of bacteriophages (λ, T3, and T7).

Growth and morphological analysis of segmented AuAg alloy nanowires created by pulsed electrodeposition in ion-track etched membranes

BACKGROUND

Multicomponent heterostructure nanowires and nanogaps are of great interest for applications in sensorics. Pulsed electrodeposition in ion-track etched polymer templates is a suitable method to synthesise segmented nanowires with segments consisting of two different types of materials. For a well-controlled synthesis process, detailed analysis of the deposition parameters and the size-distribution of the segmented wires is crucial.

RESULTS

The fabrication of electrodeposited AuAg alloy nanowires and segmented Au-rich/Ag-rich/Au-rich nanowires with controlled composition and segment length in ion-track etched polymer templates was developed. Detailed analysis by cyclic voltammetry in ion-track membranes, energy-dispersive X-ray spectroscopy and scanning electron microscopy was performed to determine the dependency between the chosen potential and the segment composition. Additionally, we have dissolved the middle Ag-rich segments in order to create small nanogaps with controlled gap sizes. Annealing of the created structures allows us to influence their morphology.

CONCLUSION

AuAg alloy nanowires, segmented wires and nanogaps with controlled composition and size can be synthesised by electrodeposition in membranes, and are ideal model systems for investigation of surface plasmons.

(Hollow Au–Ag nanoparticles)–TiO2 composites for improved photocatalytic activity prepared from block copolymer-stabilized bimetallic nanoparticles

(Hollow AuAg nanoparticles)–TiO₂ composite particles, showing higher photocatalytic activity, have been prepared.

Hybrid single nanoreactor for in situ SERS monitoring of plasmon-driven and small Au nanoparticles catalyzed reactions

A hybrid single nanoreactor composed of Au nanoparticles and a Ag nanowire can be used for in situ SERS monitoring of plasmon-driven and Au-catalyzed reactions.

Design and fabrication of Ni nanowires having periodically hollow nanostructures

We propose a concept for the design and fabrication of metal nanowires having periodically hollow nanostructures inside the pores of an anodic aluminum oxide (AAO) membrane using a sacrificial metal. In this study, nickel (Ni) and silver (Ag) were used as the base metal and the sacrificial metal, respectively. Alternating an applied potential between -0.4 and -1.0 V provided alternatively deposited Ni and Ag segments in a Ni-Ag 'barcode' nanowire with a diameter of 18 or 35 nm. After etching away the Ag segments, we fabricated Ni nanowires with nanopores of 12 ± 5.3 nm. Such nanostructure formation is explained by the formation of a Ni shell layer over the surface of the Ag segments due to the strong affinity of Ni(2+) for the interior surfaces of AAO. The Ni shell layer allows the Ni segments to remain even after dissolution of the Ag segments. Because the electroplating conditions can be easily controlled, we could carefully adjust the size and pitch of the periodically hollow nanospaces. We also describe a method for the fabrication of Ni nanorods by forming an Ag shell instead of a Ni shell on the Ni-Ag barcode nanowire, in which the interior of the AAO surfaces was modified with a compound bearing a thiol group prior to electroplating.

Electrospun TiO₂ nanofelt surface-decorated with Ag nanoparticles as sensitive and UV-cleanable substrate for surface enhanced Raman scattering

In this study, the free-standing electrospun nanofibrous mat (i.e., nanofelt) consisting of anatase-phase TiO2 nanofibers with diameters of ∼200 nm was prepared, and the nanofelt was subsequently surface-decorated with Ag nanoparticles via an electroless plating method. The sensitivity toward surface enhanced Raman scattering (SERS) and UV-cleanable property of electrospun TiO2/Ag nanofelt were then investigated. In the SERS tests, the target analyte (i.e., 4-mercaptobenzoic acid, Rhodamine 6G, and 4-aminothiophenol) was first adsorbed onto the TiO2/Ag nanofelt as the probe analyte; this was followed by the measurements of Raman intensity and SERS maps. Thereafter, the nanofelt adsorbed with target analyte was cleaned and regenerated/recovered upon UV irradiation in O2-saturated water, and the removal of target analyte was attributed to photodegradation property of anatase-phase TiO2. This study suggested that the electrospun TiO2/Ag nanofelt would be promising as SERS-active substrate with UV-cleanable property for cost-effective and reproducible SERS applications.

Self-seeded growth of five-fold twinned copper nanowires: mechanistic study, characterization, and SERS applications

A comprehensive mechanistic study conducted on the formation mechanism of five-fold twinned copper nanowires by heating copper(I) chloride with oleylamine at 170 °C is presented. Electron microscopy and UV-visible absorption spectra are used to analyze the growth mechanism of copper nanowires. High-resolution transmission electron microscopy and selected-area electron diffraction are used to investigate the detailed structure of copper nanowires and nanoparticles, and a five-twinned structure is shown to exist in the copper nanowires and nanoparticles. Additionally, experiments have been performed to indirectly confirm that oleylamine preferentially adsorbs on the {100} facets of growing crystals. On the basis of the above results, the self-seeded growth of copper nanowires is confirmed. In the initial stage of reactions, copper nanoparticles with two distinctive sizes are formed. As the reaction proceeds, larger five-twinned copper nanoparticles serve as seeds for anisotropic crystal growth. Further, copper atoms generated from an Ostwald ripening process or reduction reactions of a copper(I) chloride-oleylamine complex continue to deposit and crystallize on the twin boundaries. Once the {110} planes are generated, oleylamine preferentially adsorbs on the newly formed {100} facets and then guides the formation of nanowires. The electrical resistivity of a single copper nanowire is measured to be 41.25 nΩ-m, which is of the same order of magnitude as the value of bulk copper (16.78 nΩ-m). Finally, an effective surface-enhanced Raman spectroscopy active substrate made of copper nanowire is used to detect the 4-mercaptobenzoic acid molecules.

Reliable plasmonic substrates for bioanalytical SERS applications easily prepared by convective assembly of gold nanocolloids

The ability to easily prepare Surface Enhanced Raman Scattering (SERS) substrates by the assembly of chemically synthesized gold nanocolloids is of great interest for the advancement of SERS-based optical detection and identification of molecular species of biological or chemical interest, pollutants or warfare agents. In this work we employ three very simple strategies, which can be implemented in any laboratory without the need for specialized equipment, to prepare assemblies of citrate-stabilized spherical gold colloids: (i) drop-coating, which induces the assembly of colloids in so-called coffee rings; (ii) a simplified variant of convective self-assembly (CSA), based on water evaporation in a constrained geometry, which yields highly uniform strips of nanoparticles (NP); (iii) assembly onto chemically functionalized glass surfaces which yields randomly assembled colloids and colloidal clusters. The SERS properties of the resulting colloidal assemblies are comparatively evaluated under multiple excitation lines with p-aminothiophenol (pATP) as a model Raman scatterer. The NP strips obtained by CSA prove to be SERS-active both in the visible and NIR and possess a highly uniform SERS response as demonstrated by spectra at individually selected sites and by confocal SERS mapping. Further it is shown that these NP strips are effective for the detection of cytosine, a DNA component, and for multi-analyte SERS detection. These results, showing how an efficient SERS substrate can be obtained by a very simple assembly method from easy-to-synthesize colloidal gold NP, can have an impact on the development of analytical SERS applications.

25th anniversary article: galvanic replacement: a simple and versatile route to hollow nanostructures with tunable and well-controlled properties

This article provides a progress report on the use of galvanic replacement for generating complex hollow nanostructures with tunable and well-controlled properties. We begin with a brief account of the mechanistic understanding of galvanic replacement, specifically focused on its ability to engineer the properties of metal nanostructures in terms of size, composition, structure, shape, and morphology. We then discuss a number of important concepts involved in galvanic replacement, including the facet selectivity involved in the dissolution and deposition of metals, the impacts of alloying and dealloying on the structure and morphology of the final products, and methods for promoting or preventing a galvanic replacement reaction. We also illustrate how the capability of galvanic replacement can be enhanced to fabricate nanomaterials with complex structures and/or compositions by coupling with other processes such as co-reduction and the Kirkendall effect. Finally, we highlight the use of such novel metal nanostructures fabricated via galvanic replacement for applications ranging from catalysis to plasmonics and biomedical research, and conclude with remarks on prospective future directions.

Bimetallic platonic Janus nanocrystals

We demonstrate the creation of Ag-based bimetallic platonic Janus nanostructures by confining galvanic replacement reaction at a nanoscale interface on highly symmetrical nanostructures such as Ag nanocubes and nanooctahedra using reactive microcontact printing (μCP). The extent of galvanic replacement reaction can be controlled kinetically to derive Janus nanostructures with Au nanodots deposited on either one or multiple facets of Ag nanocubes. The selective deposition of Au dots on a single facet of Ag nanocubes breaks the cubic symmetry and brings about unique and anisotropic plasmonic responses. High-resolution cathodoluminescence hyperspectral imaging of single Janus nanocube demonstrates that surface plasmon resonances corresponding to Au and Ag can be excited at different spots on one Janus nanocube. In addition, we demonstrate the fabrication of alternating Janus/non-Janus segments on 2D Ag nanowires by using a line-patterned polydimethylsiloxane (PDMS) stamp for galvanic replacement. Aside from Au, Pt and Pd can also be selectively deposited onto Ag nanocubes. These Janus nanostructures may find important applications in the field of plasmon-enhanced catalysis.

Three-dimensional elemental mapping at the atomic scale in bimetallic nanocrystals

A thorough understanding of the three-dimensional (3D) atomic structure and composition of core-shell nanostructures is indispensable to obtain a deeper insight on their physical behavior. Such 3D information can be reconstructed from two-dimensional (2D) projection images using electron tomography. Recently, different electron tomography techniques have enabled the 3D characterization of a variety of nanostructures down to the atomic level. However, these methods have all focused on the investigation of nanomaterials containing only one type of chemical element. Here, we combine statistical parameter estimation theory with compressive sensing based tomography to determine the positions and atom type of each atom in heteronanostructures. The approach is applied here to investigate the interface in core-shell Au@Ag nanorods but it is of great interest in the investigation of a broad range of nanostructures.

Surfactant-free sub-2 nm ultrathin triangular gold nanoframes

Ultrathin triangular gold nanoframes are synthesized in high yield through selective gold deposition on the edges of triangular silver nanoprisms and subsequent silver etching with mild wet etchants. These ultrathin gold nanoframes are surfactant-free with tailorable ridge thickness from 1.8 to 6 nm and exhibit adjustable and distinct surface plasmon resonance bands in the visible and near-IR region. In comparison, etching of the nanoprism template by galvanic replacement can only create frame structures with much thicker ridges, which have much lower catalytic activity for 4-nitrophenol reduction than the ultrathin gold nanoframes.

Synthesis of hollow Ag-Au bimetallic nanoparticles in polyelectrolyte multilayers

Ag nanoparticles of ~20 nm size and rather uniform size distribution were synthesized in polyelectrolyte multilayers (PEMs) via an ion-exchange/reduction process in two stages (seeding and growth), which were used as sacrificial templates to fabricate Ag-Au bimetallic hollow nanoparticles via galvanic replacement reaction. The reaction process was monitored by UV-vis spectroscopy. The morphology and structure of the nanoparticles were characterized by transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy, which confirmed the formation of hollow Ag-Au bimetallic nanoparticles. UV-vis absorbance spectroscopy and TEM results indicated that both size and optical properties of the Ag nanoparticles in the PEM can be controlled by manipulating ion content in the PEM and the number of the ion-exchange/reduction cycle, whereas that of Ag-Au bimetallic nanoparticles were dependent on size of the Ag templates and the replacement reaction kinetics. The hollow Ag-Au bimetallic nanoparticles exhibited a significant red shift in the surface plasmon resonance to the near-infrared region. The strategy enables facile preparation of hollow bimetallic nanoparticles in situ in polymer matrixes.

Co-assembled thin films of Ag nanowires and functional nanoparticles at the liquid-liquid interface by shaking

In this paper, we report the fabrication of co-assembled thin films composed of silver nanowires (NWs) and Au nanoparticles (NPs) at the liquid-liquid interface (water-chloroform) by vigorous shaking. The composition of co-assembled thin films can be controlled by adjusting the concentration of the nanosized building blocks. As a versatile interfacial assembly method, other nanoparticles such as Ag2S and Fe3O4 NPs can also be co-assembled with Ag NWs using the same procedure. Meanwhile, the co-assembly state of the obtained Au NPs and Ag NWs makes a significant contribution to the high sensitivity of surface-enhanced Raman scattering (SERS) to model the molecule 3,3'-diethylthiatricarbocyanine iodide (DTTCI). The SERS intensities show high dependence on the molar ratio of Au NPs and Ag NWs and the layer number of the co-assembled thin films. This shaking-assisted liquid-liquid assembly system has been proved to be a facile way for co-assembling nanowires and nanoparticles, and will pave a way for further applications of the macroscopic co-assemblies with novel functionalities.

Interface-dominated galvanic replacement reactions in the Zn/Cu2+ system

Galvanic replacement (GR) reactions involving active-metal nanoparticles (NPs) as seeds have a number of distinctive features and can produce various noble-metal nanoparticles. The oxide layer on the surfaces of such active-metal seeds may make a remarkable impact on the final products. Taking the Zn/Cu(2+) system as a model, we show that the GR reaction of pure Zn seeds with Cu(2+) ions leads to Cu nanodendrites, while oxide-covered Zn seeds result in ultrafine Cu NPs. We demonstrate here that the oxide layer does not block the GR reaction but slows down its rate. We also show that the growing Cu NPs can eventually detach from their ZnO substrate because of poor adhesion and disperse in the reaction liquid very well. Our studies provide detailed information on mechanisms of the GR reaction involving active-metal seeds, and therefore may be useful for further control of the morphology and properties of products prepared via this approach.

Peptide-guided surface-enhanced Raman scattering probes for localized cell composition analysis

The ability to control the localization of surface-enhanced Raman scattering (SERS) nanoparticle probes in bacterial cells is critical to the development of analytical techniques that can nondestructively determine cell composition and phenotype. Here, selective localization of SERS probes was achieved at the outer bacterial membrane by using silver nanoparticles functionalized with synthetic hydrophobic peptides.

High Raman enhancing shape-tunable ag nanoplates in alumina: a reliable and efficient SERS technique

Shape-tunable Ag nanoplates in alumina enable very strong SERS performances showing Raman enhancement factor >1 × 10(9), and allows for easy detection of analyte methylene blue having a concentration in the picomolar range. Raman enhancements have been systematically studied during the Ag nanoparticle-shape evolution from spherical nanoparticles to hexagonal nanoplates with sharp corners to truncated triangular nanoplates in alumina sol. Large SERS enhancement has been observed because of the uniform dispersion and embedment of Ag nanoplates in a relatively high dielectric alumina network where analyte molecules are held. This new approach gives uniform and strong SERS signal with reproducibility.