Carbonylation of heterocycles by homogeneous catalysts

Low-Valent Transition Metalate Anions in Synthesis, Small Molecule Activation, and Catalysis

This review surveys the synthesis and reactivity of low-oxidation state metalate anions of the d-block elements, with an emphasis on contributions reported between 2006 and 2022. Although the field has a long and rich history, the chemistry of transition metalate anions has been greatly enhanced in the last 15 years by the application of advanced concepts in complex synthesis and ligand design. In recent years, the potential of highly reactive metalate complexes in the fields of small molecule activation and homogeneous catalysis has become increasingly evident. Consequently, exciting applications in small molecule activation have been developed, including in catalytic transformations. This article intends to guide the reader through the fascinating world of low-valent transition metalates. The first part of the review describes the synthesis and reactivity of d-block metalates stabilized by an assortment of ligand frameworks, including carbonyls, isocyanides, alkenes and polyarenes, phosphines and phosphorus heterocycles, amides, and redox-active nitrogen-based ligands. Thereby, the reader will be familiarized with the impact of different ligand types on the physical and chemical properties of metalates. In addition, ion-pairing interactions and metal-metal bonding may have a dramatic influence on metalate structures and reactivities. The complex ramifications of these effects are examined in a separate section. The second part of the review is devoted to the reactivity of the metalates toward small inorganic molecules such as H2, N2, CO, CO2, P4 and related species. It is shown that the use of highly electron-rich and reactive metalates in small molecule activation translates into impressive catalytic properties in the hydrogenation of organic molecules and the reduction of N2, CO, and CO2. The results discussed in this review illustrate that the potential of transition metalate anions is increasingly being tapped for challenging catalytic processes with relevance to organic synthesis and energy conversion. Therefore, it is hoped that this review will serve as a useful resource to inspire further developments in this dynamic research field.

Sustainable Polymers: Our Evolving Understanding

ConspectusThis Account discusses the evolution of our strategy to conduct environmentally responsible research in the field of polymer chemistry. To contextualize our work, we begin with a broad historical overview of the modern environmental movement, the rise of sustainability as a concept, and how chemistry has responded to these forces, which were often sharply critical of our field. We then trace our own responses, from graduate school onward, chronicling a series of experiences and research projects that molded, challenged, and reshaped how we think about sustainability in polymer science.Since beginning our independent careers in 2004, we have recognized and worked to resolve the tension between designing synthetic polymers for specific desired thermomechanical properties and minimizing environmental impact. In our early years, we were most strongly guided by the 12 Principles of Green Chemistry (12PGC), which had only recently been proposed. The authors' early research agendas had a rather narrow focus on two areas, specifically catalysis and biobased monomers, which we saw as strongly linked to sustainability. Over time, we found these areas to be too narrow in their focus, ignoring important considerations such as the capacity of monomer supply to support scale-up and the impact polymers have at the end of their usage lifetimes. With respect to monomers and catalysts, we consider descriptive metrics that quantify waste production and the toxicity of compounds used during synthesis. In terms of polymer end-of-life, we discuss hydrophobicity as a tool to help understand susceptibility to degradation in the environment as well as some of the concerns with design for degradation, a critical component of 12PGC.Now, after nearly two decades of investigation, we believe that achieving sustainability in polymer science will require us to move beyond the qualitative use of the 12PGC to a portfolio of metrics. We note a heartening increase in the availability and use of such metrics and tools across the field. These include items that provide limited insight but are relatively trivial to integrate into existing workflows such as E factor or the Toxicity Estimation Software Tool. We also appreciate the increased use of Life Cycle Assessment (LCA), which is both dramatically more thorough and difficult to deploy. Finally, we propose the creation of a national LCA center, similar to instrumental core facilities. Such a resource would enable the use of this tool across multiple phases of research and we hope would more effectively guide us to a sustainable future.

Formation of Mononuclear N,O-chelate Zirconium Complexes by Direct Insertion of Epoxide into Tetrakis(dimethylamido)zirconium: Highly Promising Approach for Developing ALD Precursor of ZrO2 Thin Film

A zirconium complex containing an N,O-chelate and alkylamide ligand has great potential for application in atomic layer deposition (ALD). However, the synthesis of this mononuclear Zr complex remains a major...

Carbonylative Polymerization of Epoxides Mediated by Tri-metallic Complexes: A Dual Catalysis Strategy for Synthesis of Biodegradable Polyhydroxyalkanoates

Polyhydroxyalkanoates (PHAs) are a unique class of commercially manufactured biodegradable polyesters with properties suitable for partially substituting petroleum-based plastics. However, high costs and low volumes of production have restricted their application as commodity materials. In this study, tri-metallic complexes were developed for carbonylative polymerization of epoxides via a dual catalysis strategy, affording 17 products of novel PHAs with up to 38.2 kg/mol M n values. The polymerization proceeds in a sequential fashion, which entails the carbonylative ring expansion of epoxide to β -lactone and its subsequent ring-opening polymerization that occurs selectively at the O- alkyl bond via carboxylate species. The wide availability and structural diversity of epoxide monomers provide PHAs with various structures, excellent functionalities, and tunable properties. This study represents a rare example of the preparation of PHAs using epoxides and carbon monoxide as raw materials.

Cobalt Carbonyls Stabilized by N,P-Ligands: Synthesis, Structure, and Catalytic Property for Ethylene Oxide Hydroalkoxycarbonylation

Reactions of N,P-Ligands as Ph₂ P(o-NMe₂ C₆ H₄ ) (¹ L), 2,6-iPr₂ C₆ H₃ NHC(Ph)=NC₆ H₄ (o-PPh₂ ) (² L), and Ph₂ PN(R)PPh₂ (R=iPr (³ L), cyclo-C₆ H₁₁ (⁴ L), tBu (⁵ L), CH₂ C₄ H₇ O (⁶ L)) each with dicobalt octacarbonyl produced complexes [¹ LCo(CO)₃ ]₂ (1), [² LCo(CO)(μ-CO)₂ Co(CO)₃ ] (2), [³ LCo(CO)₃ ]⁺ [Co(CO)₄ ]^- (3), [³ LCo(CO)₂ ]₂ (4), [⁴ LCo(CO)₂ ]₂ (5), [⁵ LCo(CO)₂ ]⁺ [Co(CO)₄ ]^- (6), and [⁶ LCo(CO)₂ ]⁺ [Co(CO)₄ ]^- (7). Complexes 1-7 have all been structurally characterized by X-ray crystallography, IR and NMR spectroscopies, and elemental analysis. Catalytic tests on transformation of ethylene oxide (EO), CO and MeOH into methyl 3-hydroxypropionate (3-HMP) indicate that complexes 1-7 are active, where ion-pair complexes 3 and 6-7 behave more excellently (by achieving 88.4-93.6% 3-HMP yields) than the neutral species 1-2 and 4-5 (35.0-46.5% 3-HMP yields) when the reactions are all operated at 2 MPa CO pressure and 50 °C in MeOH solvent. Density functional theory (DFT) study by selecting 3 as a model suggests a cooperative catalytic reaction mechanism by [Co(CO)₄ ]^- and its counter cation [³ LCo(CO)₃ ]⁺ . The cobalt-homonuclear ion-pair catalyzed hydroalkoxycarbonylation of EO is present herein.

Nucleophilic Transformations of Lewis Acid-Activated Disubstituted Epoxides with Catalyst-Controlled Regioselectivity

Due to their inherent ring strain and electrophilicity, epoxides are highly attractive building blocks for fundamental organic reactions. However, controlling the regioselectivity of disubstituted epoxide transformations is often particularly challenging. Most Lewis acid-mediated processes take advantage of intrinsic steric or electronic substrate bias to influence the site of nucleophilic attack. Therefore, the scope of many of these systems is frequently quite limited. Recent efforts to generate catalysts that can overcome substrate bias have expanded the synthetic utility of these well-known reactions. In this Perspective, we highlight various regioselective transformations of disubstituted epoxides, emphasizing those that have inspired the production of challenging, catalyst-controlled processes.

Deoxygenation of Epoxides with Carbon Monoxide

The use of carbon monoxide as a direct reducing agent for the deoxygenation of terminal and internal epoxides to the respective olefins is presented. This reaction is homogeneously catalyzed by a carbonyl pincer-iridium(I) complex in combination with a Lewis acid co-catalyst to achieve a pre-activation of the epoxide substrate, as well as the elimination of CO2 from a γ-2-iridabutyrolactone intermediate. Especially terminal alkyl epoxides react smoothly and without significant isomerization to the internal olefins under CO atmosphere in benzene or toluene at 80-120 °C. Detailed investigations reveal a substrate-dependent change in the mechanism for the epoxide C-O bond activation between an oxidative addition under retention of the configuration and an SN 2 reaction that leads to an inversion of the configuration.

Cr-Phthalocyanine Porous Organic Polymer as an Efficient and Selective Catalyst for Mono Carbonylation of Epoxides to Lactones

A facile, one-pot design strategy to construct chromium(III)-phthalocyanine chlorides (Pc’CrCl) to form porous organic polymer (POP-Pc’CrCl) using solvent knitting Friedel-Crafts reaction (FCR) is described. The generated highly porous POP-Pc’CrCl is functionalized by post-synthetic exchange reaction with nucleophilic cobaltate ions to provide an heterogenized carbonylation catalyst (POP-Pc’CrCo(CO)4) with Lewis acid-base type bimetallic units. The produced porous polymeric catalyst is identical to that homogeneous counterpart in structure and coordination environments. The catalyst is very selective and effective for mono carbonylation of epoxide into corresponding lactone and the activities are comparable to those observed for a homogeneous Pc’CrCo(CO)4 catalyst. The (POP-Pc’CrCo(CO)4) also displayed a good catalytic activities and recyclability upon successive recycles.

Direct Heterogenization of Salphen Coordination Complexes to Porous Organic Polymers: Catalysts for Ring-Expansion Carbonylation of Epoxides

Salen and salphens are important ligands in coordination chemistry due to their ability to form various metal complexes that can be used for a variety of organic transformations. However, salen/salphen complexes are difficult to separate from the reaction mixture, thereby limiting their application to homogeneous systems. Accordingly, considerable effort has been spent to heterogenize the metallosalen/salphen complexes; however, this has resulted in compromised activities and selectivities. Direct heterogenization of metallosalens to form porous organic polymers (POPs) shows promise for heterogeneous catalysis, because it would allow easy separation while retaining catalytic function. Thus, a facile synthetic strategy for preparing metallosalen/salphen-based porous organic polymers through direct molecular knitting using a Friedel-Crafts reaction is presented herein for the first time. As representative candidates, salphenM(III)Cl (M = Al³⁺ and Cr³⁺) complexes are knitted by covalent cross-linking using this facile, scalable, one-pot method to synthesize highly POPs in high yields. When incorporated with [Co(CO)₄]^- anions, the resulting heterogeneous Lewis acidic metal (Al³⁺ and Cr³⁺) POPs exhibit propylene oxide ring-expansion carbonylation activity on par with those of their homogeneous counterparts.

Cobalt-Catalyzed Alkoxycarbonylation of Epoxides to β-Hydroxyesters

Herein, we developed a new and practical catalytic system for the carbonylative synthesis of β-hydroxyesters. By using simple, cheap, and air-stable cobalt(II) bromide as the catalyst, combined with pyrazole and catalytic amount of manganese, active cobalt complex can be generated in situ and can catalyze various epoxides to give the corresponding β-hydroxyesters in moderate to excellent yields. Mechanism studies indicate that pyrazole plays a crucial role in this reaction. Moreover, with the addition of the catalytic amount of manganese, the active cobalt catalyst can be regenerated, which provides a possibility for reusing the cobalt catalyst.

Hyper-Cross-Linked Porous Porphyrin Aluminum(III) Tetracarbonylcobaltate as a Highly Active Heterogeneous Bimetallic Catalyst for the Ring-Expansion Carbonylation of Epoxides

Development of an industrially viable catalyst for the ring-expansion carbonylation of epoxides remains challenging in the view of facile product separation and recyclability. Herein, we report a heterogenized porous porphyrin Al(III) tetracarbonylcobaltate bimetallic catalyst for the ring-expansion carbonylation of epoxides. The catalyst was synthesized using a hyper-cross-linking strategy involving methylene bridges introduced by the Friedel-Crafts reaction and incorporated with cobaltate anions. The catalyst effectively converts epoxides into the corresponding β-lactones with an excellent site time yield of 360 h^-1, which is comparable to that of the corresponding homogeneous catalysts and is the highest of any heterogeneous catalyst reported so far for this reaction.

Palladium(II)-Catalyzed C(sp2)-H Carbonylation of Sterically Hindered Amines with Carbon Monoxide

A palladium-catalyzed, amine-directed C(sp²)-H carbonylation of α,α-disubstituted benzylamine under 1 atm of CO for the facile synthesis of sterically hindered benzolactam has been developed. The key to success is the use of 2,2,6,6-tetramethyl-1-piperidinyloxy as the crucial sole oxidant. The synthetic utility of this transformation has been demonstrated by the first concise synthesis of the natural product spiropachysin-20-one.

A Metalated Porous Porphyrin Polymer with [Co(CO)4]- Anion as an Efficient Heterogeneous Catalyst for Ring Expanding Carbonylation

The synthesis of β-lactones from epoxides through ring-expanding carbonylation using homogeneous catalysts has received much attention. However, homogeneous catalysts suffer from difficulty in product separation and recycling of the catalyst, limiting their industrial usage. Herein, a novel heterogeneous catalyst, [Cr-metalated porous porphyrin polymer]⁺[Co(CO)₄]⁻, was prepared and used for the conversion of propylene oxide (PO) to β-butyrolactone; this catalyst presented superior catalytic activity and selectivity (99%) than our previous heterogeneous catalyst. In addition, the catalyst was readily separated from the product without significant loss of catalytic activity. A possible method to recover the original catalytic activity also was demonstrated.

Stereochemical Structure Activity Relationship Studies (S-SAR) of Tetrahydrolipstatin

Tetrahydrolipstatin (THL), its enantiomer, and an additional six diastereomers were evaluated as inhibitors of the hydrolysis of p-nitrophenyl butyrate by porcine pancreatic lipase. IC₅₀s were found for all eight stereoisomers ranging from a low of 4.0 nM for THL to a high of 930 nM for the diastereomer with the inverted stereocenters at the 2,3,2'-positions. While the enantiomer of THL was also significantly less active (77 nM) the remaining five stereoisomers retained significant inhibitory activities (IC₅₀s = 8.0 to 20 nM). All eight compounds were also evaluated against three human cancer cell lines (human breast cancers MCF-7 and MDA-MB-231, human large-cell lung carcinoma H460). No appreciable cytotoxicity was observed for THL and its seven diastereomers, as their IC₅₀s in a MTT cytotoxicity assay were all greater than 3 orders of magnitude of camptothecin.

Heterogeneous Epoxide Carbonylation by Cooperative Ion-Pair Catalysis in Co(CO)4--Incorporated Cr-MIL-101

Despite the commercial desirability of epoxide carbonylation to β-lactones, the reliance of this process on homogeneous catalysts makes its industrial application challenging. Here we report the preparation and use of a Co(CO)₄^--incorporated Cr-MIL-101 (Co(CO)₄⊂Cr-MIL-101, Cr-MIL-101 = Cr₃O(BDC)₃F, H₂BDC = 1,4-benzenedicarboxylic acid) heterogeneous catalyst for the ring-expansion carbonylation of epoxides, whose activity, selectivity, and substrate scope are on par with those of the reported homogeneous catalysts. We ascribe the observed performance to the unique cooperativity between the postsynthetically introduced Co(CO)₄^- and the site-isolated Lewis acidic Cr(III) centers in the metal-organic framework (MOF). The heterogeneous nature of Co(CO)₄⊂Cr-MIL-101 allows the first demonstration of gas-phase continuous-flow production of β-lactones from epoxides, attesting to the potential applicability of the heterogeneous epoxide carbonylation strategy.

Cobalt carbonyl-catalyzed carbonylation of functionalized aziridines to versatile β-lactam building blocks

Aziridine to azetidin-2-one carbonylation as a convenient entry to pyrrolidines,C-fused bi- and tricyclic β-lactams and monocyclic carbapenem analogs.

Meinwald-type rearrangement of monosubstituted epoxides to methyl ketones using an [Al porphyrin]+[Co(CO)4]−catalyst

A Meinwald-type rearrangement of monosubstituted epoxides to methyl ketones using a well-defined aluminum porphyrin catalyst is reported.

Palladium-catalyzed oxidative carbonylation of hydrazides: synthesis of 1,3,4-oxadiazol-2(3H)-ones

A novel palladium-catalyzed oxidative carbonylation reaction was developed via the carbon monoxide insertions between the amine group and the carbonyl group to realize the intramolecular cyclization, which provides efficient access to 1,3,4-oxadiazol-2(3H)-ones with a wide range of substrates under mild conditions, resulting in good to excellent yields.

Total synthesis of tetrahydrolipstatin and stereoisomers via a highly regio- and diastereoselective carbonylation of epoxyhomoallylic alcohols

A concise enantioselective synthesis of tetrahydrolipstatin (THL) and seven stereoisomers has been achieved. The synthesis of THL was accomplished in 10 steps and 31% overall yield from an achiral ynone. Key to the success of the approach is the use of a bimetallic [Lewis acid](+)[Co(CO)4](-) catalyst for a late-stage regioselective carbonylation of an enantiomerically pure cis-epoxide to a trans-β-lactone. The success of this route to THL and its stereoisomers also demonstrated the practicality of the carbonylation catalyst for complex molecule synthesis as well as its functional group compatibility.

Benzyl β-malolactonate polymers: a long story with recent advances

Benzyl β-malolactonate (MLABe) and its corresponding poly(benzyl β-malolactonate) (PMLABe) homopolymers and copolymers of the poly(hydroxyalkanoate) (PHA) family.