Quantitative Evaluation of the Pore and Window Sizes of Tissue Engineering Scaffolds on Scanning Electron Microscope Images Using Deep Learning

The morphological characteristics of tissue engineering scaffolds, such as pore and window diameters, are crucial, as they directly impact cell-material interactions, attachment, spreading, infiltration of the cells, degradation rate and the mechanical properties of the scaffolds. Scanning electron microscopy (SEM) is one of the most commonly used techniques for characterizing the microarchitecture of tissue engineering scaffolds due to its advantages, such as being easily accessible and having a short examination time. However, SEM images provide qualitative data that need to be manually measured using software such as ImageJ to quantify the morphological features of the scaffolds. As it is not practical to measure each pore/window in the SEM images as it requires extensive time and effort, only the number of pores/windows is measured and assumed to represent the whole sample, which may cause user bias. Additionally, depending on the number of samples and groups, a study may require measuring thousands of samples and the human error rate may increase. To overcome such problems, in this study, a deep learning model (Pore D2) was developed to quantify the morphological features (such as the pore size and window size) of the open-porous scaffolds automatically for the first time. The developed algorithm was tested on emulsion-templated scaffolds fabricated under different fabrication conditions, such as changing mixing speed, temperature, and surfactant concentration, which resulted in scaffolds with various morphologies. Along with the developed model, blind manual measurements were taken, and the results showed that the developed tool is capable of quantifying pore and window sizes with a high accuracy. Quantifying the morphological features of scaffolds fabricated under different circumstances and controlling these features enable us to engineer tissue engineering scaffolds precisely for specific applications. Pore D2, an open-source software, is available for everyone at the following link: https://github.com/ilaydakaraca/PoreD2.

Surfactant-free gelatin-stabilised biodegradable polymerised high internal phase emulsions with macroporous structures

High internal phase emulsion (HIPE) templating is a well-established method for the generation of polymeric materials with high porosity (>74%) and degree of interconnectivity. The porosity and pore size can be altered by adjusting parameters during emulsification, which affects the properties of the resulting porous structure. However, there remain challenges for the fabrication of polyHIPEs, including typically small pore sizes (∼20-50 μm) and the use of surfactants, which can limit their use in biological applications. Here, we present the use of gelatin, a natural polymer, during the formation of polyHIPE structures, through the use of two biodegradable polymers, polycaprolactone-methacrylate (PCL-M) and polyglycerol sebacate-methacrylate (PGS-M). When gelatin is used as the internal phase, it is capable of stabilising emulsions without the need for an additional surfactant. Furthermore, by changing the concentration of gelatin within the internal phase, the pore size of the resulting polyHIPE can be tuned. 5% gelatin solution resulted in the largest mean pore size, increasing from 53 μm to 80 μm and 28 μm to 94 µm for PCL-M and PGS-M respectively. In addition, the inclusion of gelatin further increased the mechanical properties of the polyHIPEs and increased the period an emulsion could be stored before polymerisation. Our results demonstrate the potential to use gelatin for the fabrication of surfactant-free polyHIPEs with macroporous structures, with potential applications in tissue engineering, environmental and agricultural industries.

Stabilization of high internal phase Pickering emulsions with millimeter-scale droplets using silica particles

High internal phase emulsions stabilized with colloidal particles (Pickering HIPEs) have recently been studied intensively because of their great stability achieved by the irreversible adsorption of particles onto the oil-water interface and their usage as a template for synthesizing porous polymeric materials, called PolyHIPEs. In most cases, Pickering HIPEs with microscale droplets ranging from tens of micrometers to hundreds of micrometers have been successfully achieved, but the stabilization of Pickering HIPEs with millimeter-sized droplets is rarely reported. In this study, we report for the first time that, by using shape-anisotropic silica particle aggregates as a stabilizer, successful stabilization of Pickering HIPEs with millimeter-sized droplets can be achieved, and the size of droplets can be simply controlled. Additionally, we demonstrate that stable PolyHIPEs with large pores can be readily converted to PolyHIPEs with millimeter-scale pores, which have advantages in absorbent materials and biomedical engineering applications.

Development of PCL PolyHIPE Substrates for 3D Breast Cancer Cell Culture

Cancer is a becoming a huge social and economic burden on society, becoming one of the most significant barriers to life expectancy in the 21st century. In particular, breast cancer is one of the leading causes of death for women. One of the most significant difficulties to finding efficient therapies for specific cancers, such as breast cancer, is the efficiency and ease of drug development and testing. Tissue-engineered (TE) in vitro models are rapidly developing as an alternative to animal testing for pharmaceuticals. Additionally, porosity included within these structures overcomes the diffusional mass transfer limit whilst enabling cell infiltration and integration with surrounding tissue. Within this study, we investigated the use of high-molecular-weight polycaprolactone methacrylate (PCL-M) polymerised high-internal-phase emulsions (polyHIPEs) as a scaffold to support 3D breast cancer (MDA-MB-231) cell culture. We assessed the porosity, interconnectivity, and morphology of the polyHIPEs when varying mixing speed during formation of the emulsion, successfully demonstrating the tunability of these polyHIPEs. An ex ovo chick chorioallantoic membrane assay identified the scaffolds as bioinert, with biocompatible properties within a vascularised tissue. Furthermore, in vitro assessment of cell attachment and proliferation showed promising potential for the use of PCL polyHIPEs to support cell growth. Our results demonstrate that PCL polyHIPEs are a promising material to support cancer cell growth with tuneable porosity and interconnectivity for the fabrication of perfusable 3D cancer models.

Solid-state thermal rectification of bilayers by asymmetric elastic modulus

A highly efficient thermal rectification applicable to large panels still needs to be developed. Here, we experimentally achieve a high thermal rectification efficiency of 33% by carefully engineering elastic modulus asymmetry in a centimeter-scale bilayered silver-graphene oxide sponge. The thermal conduction primarily occurs in the out-of-plane direction, and the forward heat flow direction is from the hard silver to the soft graphene oxide. Surprisingly, the forward heat flow direction is reversed when a silver layer is formed on a harder polystyrene foam. The forward direction is always from the harder side to the softer side, and the asymmetry in elastic modulus is suggested as a possible mechanism based on the one-dimensional Frenkel-Kontorova (FK) model. The finite element analysis indicates that other mechanisms such as temperature-dependent thermal conductivity and radiation asymmetry cannot explain the high rectification efficiency. This scalable work over a wide temperature range may find immediate industrial applications.

Water-in-oil high internal phase Pickering emulsions formed by spontaneous interfacial hydrolysis of monomer oil

HYPOTHESIS

Alcohols can strongly reduce the interfacial tension between immiscible liquids, thus facilitating the formation of emulsions. By combining non-surface-active hydrophobic particles with medium-chain alcohols, stable water-in-oil (w/o) high internal phase Pickering emulsions (HIPPEs) can be easily prepared without high-energy emulsification methods.

EXPERIMENTS

The emulsions containing acrylate monomer as the oil phase were prepared at different pH values in the presence of hydrophobic silica particles. Further, by replacing monomer oil with organic solvents (e.g., toluene) and a certain concentration of alcohol, the promoted particle adsorption at the oil-water interface has been systematically investigated. The morphology and interfacial structure of HIPPEs were visualized by confocal laser scanning microscopy (CLSM).

FINDING

At high pH, stable water-in-acrylate monomer HIPPEs can be formed using commercial fumed silica nanoparticles alone with simple stirring or vortexing. The hydrolysis of the acrylate group at high pH can generate alcohols in situ which adsorb at the oil-water interface to reduce the interfacial tension and promote particle adsorption to hinder droplet coalescence. The novel strategy for forming stable and processable HIPPEs can be universally applied to different hydrophobic silica particles with the help of various alcohols as the co-stabilizer, which provides a flexible approach for the fabrication of lightweight, closed-cell solid foams for a range of applications.

3D Cell Culture Systems: Tumor Application, Advantages, and Disadvantages

The traditional two-dimensional (2D) in vitro cell culture system (on a flat support) has long been used in cancer research. However, this system cannot be fully translated into clinical trials to ideally represent physiological conditions. This culture cannot mimic the natural tumor microenvironment due to the lack of cellular communication (cell-cell) and interaction (cell-cell and cell-matrix). To overcome these limitations, three-dimensional (3D) culture systems are increasingly developed in research and have become essential for tumor research, tissue engineering, and basic biology research. 3D culture has received much attention in the field of biomedicine due to its ability to mimic tissue structure and function. The 3D matrix presents a highly dynamic framework where its components are deposited, degraded, or modified to delineate functions and provide a platform where cells attach to perform their specific functions, including adhesion, proliferation, communication, and apoptosis. So far, various types of models belong to this culture: either the culture based on natural or synthetic adherent matrices used to design 3D scaffolds as biomaterials to form a 3D matrix or based on non-adherent and/or matrix-free matrices to form the spheroids. In this review, we first summarize a comparison between 2D and 3D cultures. Then, we focus on the different components of the natural extracellular matrix that can be used as supports in 3D culture. Then we detail different types of natural supports such as matrigel, hydrogels, hard supports, and different synthetic strategies of 3D matrices such as lyophilization, electrospiding, stereolithography, microfluid by citing the advantages and disadvantages of each of them. Finally, we summarize the different methods of generating normal and tumor spheroids, citing their respective advantages and disadvantages in order to obtain an ideal 3D model (matrix) that retains the following characteristics: better biocompatibility, good mechanical properties corresponding to the tumor tissue, degradability, controllable microstructure and chemical components like the tumor tissue, favorable nutrient exchange and easy separation of the cells from the matrix.

Fundamentals and Design-Led Synthesis of Emulsion-Templated Porous Materials for Environmental Applications

Emulsion templating is at the forefront of producing a wide array of porous materials that offers interconnected porous structure, easy permeability, homogeneous flow-through, high diffusion rates, convective mass transfer, and direct accessibility to interact with atoms/ions/molecules throughout the exterior and interior of the bulk. These interesting features together with easily available ingredients, facile preparation methods, flexible pore-size tuning protocols, controlled surface modification strategies, good physicochemical and dimensional stability, lightweight, convenient processing and subsequent recovery, superior pollutants remediation/monitoring performance, and decent recyclability underscore the benchmark potential of the emulsion-templated porous materials in large-scale practical environmental applications. To this end, many research breakthroughs in emulsion templating technique witnessed by the recent achievements have been widely unfolded and currently being extensively explored to address many of the environmental challenges. Taking into account the burgeoning progress of the emulsion-templated porous materials in the environmental field, this review article provides a conceptual overview of emulsions and emulsion templating technique, sums up the general procedures to design and fabricate many state-of-the-art emulsion-templated porous materials, and presents a critical overview of their marked momentum in adsorption, separation, disinfection, catalysis/degradation, capture, and sensing of the inorganic, organic and biological contaminants in water and air.

Facile Construction of Bio-Based Supramolecular Hydrogels from Dehydroabietic Acid with a Tricyclic Hydrophenanthrene Skeleton and Stabilized Gel Emulsions

Supramolecular hydrogels have attracted great attention due to their special properties. In this research, bio-based supramolecular hydrogels were conveniently constructed by heating and ultrasounding two components of dehydroabietic acid with a rigid tricyclic hydrophenanthrene skeleton and morpholine. The microstructures and properties of hydrogels were investigated by DSC, rheology, SAXS, CD spectroscopy, and cryo-TEM, respectively. The critical gel concentration (CGC) of the hydrogel was 0.3 mol·L⁻¹ and the gel temperature was 115 °C. In addition, the hydrogel showed good stability and mechanical properties according to rheology results. Cryo-TEM images reveal that the microstructure of hydrogel is fibrous meshes; its corresponding mechanism has been studied using FT-IR spectra. Additionally, oil-in-water gel emulsions were prepared by the hydrogel at a concentration above its CGC, and the oil mass fraction of the oil-in-water gel emulsions could be freely adjusted between 5% and 70%. This work provides a convenient way to prepare bio-based supramolecular hydrogels and provides a new method for the application of rosin.

All-natural oil-in-water high internal phase Pickering emulsions featuring interfacial bilayer stabilization

HYPOTHESIS

Synergistic stabilization of high internal phase Pickering emulsions (HIPPEs) by food-grade colloidal particles are necessary for food, pharmaceuticals or cosmetics owing to their biocompatibility and multi-functionality. By tuning the interfacial structure of adsorbed binary particles, the HIPPE may exhibit extraordinary characteristics compared to conventional all-natural HIPPEs solely stabilized by single-component particle or composite particle, which should have potential applications in varies fields.

EXPERIMENTS

HIPPEs were prepared by using zein protein nanoparticles (ZNPs) and starch nanocrystals (SNCs) as stabilizers. We systematically investigated the effect of particle concentration and internal phase fraction on HIPPEs morphology, stability and rheological behaviors. Further, the stabilization mechanism as well as potential applications were demonstrated.

FINDINGS

HIPPEs were prepared with excellent stability against centrifugation and high temperature (50 °C). Our result indicates the successful construction of unique bilayer interfacial structures consisting of inner ZNPs layer and outer SNCs layer. Since SNCs could gelatinize at 50 °C, dense shells can form around droplets afterwards. Such thermally responsive interfacial structures can be used to protect hydrophobic bioactive substances at higher temperatures while still allowing controlled release at certain conditions. Furthermore, with high internal phase fraction, HIPPEs can possibly replace mayonnaise and salad dressing on the market due to comparable appearance and properties. Following the removal of inner oil, porous materials can be further fabricated, which have potential applications in environmental protection or tissue engineering.

Translocation Dynamics of High-Internal Phase Double Emulsions in Narrow Channels

We numerically study the translocation dynamics of double emulsion drops with multiple close-packed inner droplets within constrictions. Such liquid architectures, which we refer to as HIPdEs (high-internal phase double emulsions), consist of a ternary fluid, in which monodisperse droplets are encapsulated within a larger drop in turn immersed in a bulk fluid. Extensive two-dimensional lattice Boltzmann simulations show that if the area fraction of the internal drops is close to the packing fraction limit of hard spheres and the height of the channel is much smaller than the typical size of the emulsion, the crossing yields permanent shape deformations persistent over long periods of time. Morphological changes and rheological response are quantitatively assessed in terms of the structure of the velocity field, circularity of the emulsion, and rate of energy dissipated by viscous forces. Our results may be used to improve the design of soft mesoscale porous materials, which employ HIPdEs as templates for tissue engineering applications.

Porous Polymers from High Internal Phase Emulsions as Scaffolds for Biological Applications

High internal phase emulsions (HIPEs), with densely packed droplets of internal phase and monomers dispersed in the continuous phase, are now an established medium for porous polymer preparation (polyHIPEs). The ability to influence the pore size and interconnectivity, together with the process scalability and a wide spectrum of possible chemistries are important advantages of polyHIPEs. In this review, the focus on the biomedical applications of polyHIPEs is emphasised, in particular the applications of polyHIPEs as scaffolds/supports for biological cell growth, proliferation and tissue (re)generation. An overview of the polyHIPE preparation methodology is given and possibilities of morphology tuning are outlined. In the continuation, polyHIPEs with different chemistries and their interaction with biological systems are described. A further focus is given to combined techniques and advanced applications.

pH-Sensitive W/O Pickering High Internal Phase Emulsions and W/O/W High Internal Water-Phase Double Emulsions with Tailored Microstructures Costabilized by Lecithin and Silica Inorganic Particles

Synergistic stabilization of Pickering emulsions by a mixture of surfactants and colloidal particles has received increasing interest in recent years but only a few of them can produce high internal phase double emulsions (HIPDEs) with good stability. In this study, we present a feasible and common method of preparing Pickering high internal phase emulsions (HIPEs) with tunable inner morphology costabilized by a biosurfactant lecithin and silica nanoparticles. We investigate the influence of the pH value on the interfacial behavior of lecithin and elucidate the synergistic mechanism between lecithin and silica nanoparticles in different conditions in the stability of as-prepared emulsions. Specifically, water-in-oil (W/O) Pickering HIPEs can be successfully stabilized by lecithin and hydrophobic silica nanoparticles in a wide pH range (pH 1-10), while catastrophic phase inversion occurred at high pH values (pH ≥ 11). Interestingly, stable water-in-oil-in-water (W/O/W) high internal phase double emulsions (HIPDEs) can also be prepared via a two-step method by the cooperation of lecithin and silica nanoparticles. Moreover, functional interconnected porous monoliths and microspheres are facilely fabricated by emulsion templates and their potential applications are explored.

Basic Principles of Emulsion Templating and Its Use as an Emerging Manufacturing Method of Tissue Engineering Scaffolds

Tissue engineering (TE) aims to regenerate critical size defects, which cannot heal naturally, by using highly porous matrices called TE scaffolds made of biocompatible and biodegradable materials. There are various manufacturing techniques commonly used to fabricate TE scaffolds. However, in most cases, they do not provide materials with a highly interconnected pore design. Thus, emulsion templating is a promising and convenient route for the fabrication of matrices with up to 99% porosity and high interconnectivity. These matrices have been used for various application areas for decades. Although this polymer structuring technique is older than TE itself, the use of polymerised internal phase emulsions (PolyHIPEs) in TE is relatively new compared to other scaffold manufacturing techniques. It is likely because it requires a multidisciplinary background including materials science, chemistry and TE although producing emulsion templated scaffolds is practically simple. To date, a number of excellent reviews on emulsion templating have been published by the pioneers in this field in order to explain the chemistry behind this technique and potential areas of use of the emulsion templated structures. This particular review focusses on the key points of how emulsion templated scaffolds can be fabricated for different TE applications. Accordingly, we first explain the basics of emulsion templating and characteristics of PolyHIPE scaffolds. Then, we discuss the role of each ingredient in the emulsion and the impact of the compositional changes and process conditions on the characteristics of PolyHIPEs. Afterward, current fabrication methods of biocompatible PolyHIPE scaffolds and polymerisation routes are detailed, and the functionalisation strategies that can be used to improve the biological activity of PolyHIPE scaffolds are discussed. Finally, the applications of PolyHIPEs on soft and hard TE as well as in vitro models and drug delivery in the literature are summarised.

Widely Adaptable Oil-in-Water Gel Emulsions Stabilized by an Amphiphilic Hydrogelator Derived from Dehydroabietic Acid

A surfactant, R-6-AO, derived from dehydroabietic acid has been synthesized. It behaves as a highly efficient low-molecular-weight hydrogelator with an extremely low critical gelation concentration (CGC) of 0.18 wt % (4 mm). R-6-AO not only stabilizes oil-in-water (O/W) emulsions at concentrations above its critical micelle concentration (cmc) of 0.6 mm, but also forms gel emulsions at concentrations beyond the CGC with the oil volume fraction freely adjustable between 2 % and 95 %. Cryo-TEM images reveal that R-6-AO molecules self-assemble into left-handed helical fibers with cross-sectional diameters of about 10 nm in pure water, which can be turned to very stable hydrogels at concentrations above the CGC. The gel emulsions stabilized by R-6-AO can be prepared with different oils (n-dodecane, n-decane, n-octane, soybean oil, olive oil, tricaprylin) owing to the tricyclic diterpene hydrophobic structure in their molecules that enables them to adopt a unique arrangement in the fibers.

Ultrastable Water-in-Oil High Internal Phase Emulsions Featuring Interfacial and Biphasic Network Stabilization

In this work, we present gel-in-gel water-in-oil (W/O) high internal phase emulsions (HIPEs) that feature high stability by structuring both phases of the emulsion. Compared to significant advances made in oil-in-water (O/W) HIPEs, W/O HIPEs are extremely unstable and difficult to generate without introducing high concentrations of surfactants. Another main challenge is the low viscosity of both water and oil phases which promotes the instability of W/O HIPEs. Here, we demonstrate ultrastable W/O HIPEs that feature biphasic structuring, in which hydrogels are dispersed in oleogels, and self-forming, low-concentration interfacial Pickering crystals provide added stability. These W/O HIPEs exhibit high tolerance toward pH shock and destabilizing environments. In addition, this novel ultrastable gel-in-gel W/O HIPE is sustainable and made solely with natural ingredients without the addition of any synthetic stabilizers. By applying phase structuring within the HIPEs through the addition of various carrageenans and beeswax as structurants, we can increase the emulsion's stability and viscoelastic rheological properties. The performance of these gel-in-gel W/O HIPEs holds promise for a wide range of applications. As a proof of concept, we demonstrated herein the application as a gelled delivery system that enables the co-delivery of hydrophilic and hydrophobic materials at maximized loads, demonstrating high resistance to gastrointestinal pHs and a controlled-release profile.

Bioceramic nanocomposite thiol-acrylate polyHIPE scaffolds for enhanced osteoblastic cell culture in 3D

Emulsion-templated (polyHIPE) scaffolds for bone tissue engineering were produced by photopolymerisation of a mixture of trimethylolpropane tris(3-mercaptopropionate) and dipentaerythritol penta-/hexa-acrylate in the presence of hydroxyapatite (HA) or strontium-modified hydroxyapatite (SrHA) nanoparticles. Porous and permeable polyHIPE materials were produced regardless of the type or incorporation level of the bioceramic, although higher loadings resulted in a larger average pore diameter. Inclusion of HA and SrHA into the scaffolds was confirmed by EDX-SEM, FTIR and XPS and quantified by thermogravimetry. Addition of HA to polyHIPE scaffolds significantly enhanced compressive strength (148-216 kPa) without affecting compressive modulus (2.34-2.58 MPa). The resulting materials were evaluated in vitro as scaffolds for the 3D culture of MG63 osteoblastic cells vs. a commercial 3D cell culture scaffold (Alvetex®). Cells were able to migrate throughout all scaffolds, achieving a high density by the end of the culture period (21 days). The presence of HA and in particular SrHA gave greatly enhanced cell proliferation, as determined by staining of histological sections and total protein assay (Bradford). Furthermore, Von Kossa and Alizarin Red staining demonstrated significant mineralisation from inclusion of bioceramics, even at the earliest time point (day 7). Production of alkaline phosphatase (ALP), an early osteogenic marker, was used to investigate the influence of HA and SrHA on cell function. ALP levels were significantly reduced on HA- and SrHA-modified scaffolds by day 7, which agrees with the observed early onset of mineralisation in the presence of the bioceramics. The presented data support our conclusions that HA and SrHA enhance osteoblastic cell proliferation on polyHIPE scaffolds and promote early mineralisation.

Porous microspheres support mesenchymal progenitor cell ingrowth and stimulate angiogenesis

Porous microspheres have the potential for use as injectable bone fillers to obviate the need for open surgery. Successful bone fillers must be able to support vascularisation since tissue engineering scaffolds often cease functioning soon after implantation due to a failure to vascularise rapidly. Here, we test the angiogenic potential of a tissue engineered bone filler based on a photocurable acrylate-based high internal phase emulsion (HIPE). Highly porous microspheres were fabricated via two processes, which were compared. One was taken forward and investigated for its ability to support human mesenchymal progenitor cells and angiogenesis in a chorioallantoic membrane (CAM) assay. Porous microspheres with either a narrow or broad size distribution were prepared via a T-junction microfluidic device or by a controlled stirred-tank reactor of the HIPE water in oil in water (w/o/w), respectively. Culture of human embryonic stem cell-derived mesenchymal progenitor (hES-MP) cells showed proliferation over 11 days and formation of cell-microsphere aggregates. In-vitro, hES-MP cells were found to migrate into microspheres through their surface pores over time. The presence of osteoblasts, differentiated from the hES-MP cells, was evidenced through the presence of collagen and calcium after 30 days. Microspheres pre-cultured with cells were implanted into CAM for 7 days and compared with control microspheres without pre-cultured cells. The hES-MP seeded microspheres supported greater angiogenesis, as measured by the number of blood vessels and bifurcations, while the empty scaffolds attracted host chick cell ingrowth. This investigation shows that controlled fabrication of porous microspheres has the potential to create an angiogenic, bone filling material for use as a cell delivery vehicle.

Highly porous and chemical resistive P(TFEMA–DVB) monolith with tunable morphology for rapid oil/water separation

A facile preparation for a series of porous poly(2,2,2-trifluoroethylmethacrylate–divinylbenzene) P(TFEMA–DVB) foams is discussed in this paper. The foams have adjustable morphology utilizing a suitable commercial surfactant, Hypermer B246, as stabilizer, and were compared with traditional organic surfactants or macromolecular block-polymers. Combining the porous properties and advantages of fluorine atoms, this type of fluoropolymer exhibited superb chemical stability and hydrophobicity performances with high porosity. These porous fluoro-monoliths preserved their regular porous structure without any degradation after immersion into strong acidic or basic solution for three days, hence demonstrating an excellent potential to deal with environmental pollution caused by oil spillages in severe environments. The tunable morphology (open and closed pores) and pore sizes were achieved by investigating various parameters like surfactant concentration, amount of external crosslinker, and aqueous phase volume. Droplet sizes of HIPEs were characterized using an optical microscope under different experimental conditions. The influence of pore structure and surface properties of polyHIPE on water contact angle and oil adsorption capacity was also explored. The results indicated that the porous material has an excellent oleophilicity and hydrophobicity, with water contact angles (WCA) up to 146.4°. Additionally, the results presented a noticeable adsorption with a very fast rate towards organic oils from either a water surface or bottom with adsorption saturation achieved in about 120 s. The prepared polyHIPEs showed a good recycling ability; even after 10 adsorption–centrifugation experiments, the adsorption capacity was still more than 85%.

A facile preparation for a series of porous poly(2,2,2-trifluoroethylmethacrylate–divinylbenzene) P(TFEMA–DVB) foams is discussed in this paper.

Highly Porous Poly(high internal phase emulsion) Membranes with "Open-Cell" Structure and CO2-Switchable Wettability Used for Controlled Oil/Water Separation

Polymer membranes with switchable wettability have promising applications in smart separation. Hereby, we report highly porous poly(styrene-co-N,N-(diethylamino)ethyl methacrylate) (i.e., poly(St-co-DEA)) membranes with "open-cell" structure and CO₂-switchable wettability prepared from water-in-oil (W/O) high internal phase emulsion (HIPE) templates. The open-cell porous structure facilitates fluid penetration through the membranes. The combination of CO₂-switchable functionality and porous microstructure enable the membrane with CO₂-switchable wettability from hydrophobic or superoleophilic to hydrophilic or superoleophobic through CO₂ treatment in an aqueous system. This type of membrane can be used for gravity-driven CO₂-controlled oil/water separation, in which oil selectively penetrates through the membrane and separates from water. After being treated with CO₂ switching wettability of the membrane, a reversed separation of water and oil can be achieved. Such a wettability switch is fully reversible, and the membrane could be regenerated through simple removal of CO₂ and oil residual through drying. This facile and cost-effective approach represents the development of the first CO₂-switchable polyHIPE system, which is promising for smart separation in a large volume.

Competent processing techniques for scaffolds in tissue engineering

Engineering a functional tissue ex vivo requires a synchronized effort towards developing technologies for ECM mimicking scaffold and cultivating tissue-specific cells in an integrated and controlled manner. Cell-interactive scaffolds in three dimensions (3D), designed and processed appropriately with an apt biomaterial to yield optimal porosity and mechanical strength is the key in tissue engineering (TE). In order to accomplish these facets in a 3D scaffold, multiple techniques and processes have been explored by researchers all over the world. New techniques offering reasonable flexibility to use blends of different materials for integrated tissue-specific mechanical strength and biocompatibility have an edge over conventional methods. They may allow a combinatorial approach with a mix of materials while incorporating multiple processing techniques for successful creation of tissue-specific ECM mimics. In this review, we analyze the material requirement from different TE perspectives, while discussing pros and cons of advanced fabrication techniques for scale-up manufacturing.

Advances in 3D cell culture technologies enabling tissue-like structures to be created in vitro

Research in mammalian cell biology often relies on developing in vitro models to enable the growth of cells in the laboratory to investigate a specific biological mechanism or process under different test conditions. The quality of such models and how they represent the behavior of cells in real tissues plays a critical role in the value of the data produced and how it is used. It is particularly important to recognize how the structure of a cell influences its function and how co-culture models can be used to more closely represent the structure of real tissue. In recent years, technologies have been developed to enhance the way in which researchers can grow cells and more readily create tissue-like structures. Here we identify the limitations of culturing mammalian cells by conventional methods on two-dimensional (2D) substrates and review the popular approaches currently available that enable the development of three-dimensional (3D) tissue models in vitro. There are now many ways in which the growth environment for cultured cells can be altered to encourage 3D cell growth. Approaches to 3D culture can be broadly categorized into scaffold-free or scaffold-based culture systems, with scaffolds made from either natural or synthetic materials. There is no one particular solution that currently satisfies all requirements and researchers must select the appropriate method in line with their needs. Using such technology in conjunction with other modern resources in cell biology (e.g. human stem cells) will provide new opportunities to create robust human tissue mimetics for use in basic research and drug discovery. Application of such models will contribute to advancing basic research, increasing the predictive accuracy of compounds, and reducing animal usage in biomedical science.

3D surface topology guides stem cell adhesion and differentiation

Polymerized high internal phase emulsion (polyHIPE) foams are extremely versatile materials for investigating cell-substrate interactions in vitro. Foam morphologies can be controlled by polymerization conditions to result in either open or closed pore structures with different levels of connectivity, consequently enabling the comparison between 2D and 3D matrices using the same substrate with identical surface chemistry conditions. Additionally, here we achieve the control of pore surface topology (i.e. how different ligands are clustered together) using amphiphilic block copolymers as emulsion stabilizers. We demonstrate that adhesion of human mesenchymal progenitor (hES-MP) cells cultured on polyHIPE foams is dependent on foam surface topology and chemistry but is independent of porosity and interconnectivity. We also demonstrate that the interconnectivity, architecture and surface topology of the foams has an effect on the osteogenic differentiation potential of hES-MP cells. Together these data demonstrate that the adhesive heterogeneity of a 3D scaffold could regulate not only mesenchymal stem cell attachment but also cell behavior in the absence of soluble growth factors.

Phase inversion of ionomer-stabilized emulsions to form high internal phase emulsions (HIPEs)

The phase inversion of ionomer-stabilized emulsions to form high internal phase emulsions can be induced by salt concentration and pH changes.

Simple fabrication method for a porous poly(vinyl alcohol) matrix by multisolvent mixtures for an air-exposed model of the lung epithelial system

We introduce a simple and easy method for fabricating a thin and porous matrix that can be used as an extracellular matrix (ECM). A porous poly(vinyl alcohol) (PVA) matrix was created through recrystallization by multiple solvents under distilled water (DW), isopropyl alcohol (IPA), and a combination of DW and IPA. The crysatllization was driven by precipitating and dissolving a solute in a solution of a solvent and a nonsolvent, which induced the formation of microspheres in the IPA. The crystal structure depended on the ratio of the solvent/nonsolvent and the concentration of the PVA aqueous solution; these properties were used to tune the thickness, size, and porosity of the matrices. The resulting PVA matrix was chemically stabilized through a reaction with glutaraldehyde in the IPA solution. We demonstrated that a very thin and porous PVA matrix provided an effective functional model of the lung epithelial system. Lung epithelial cells (A549) displayed a high affinity for this matrix, which was permeable to the culture medium. These properties facilitated culturing under the air environment.

The effects of microRNAs on human neural stem cell differentiation in two- and three-dimensional cultures

Introduction

Stem cells have the ability to self-renew or to differentiate into numerous cell types; however, our understanding of how to control and exploit this potential is currently limited. An emerging hypothesis is that microRNAs (miRNAs) play a central role in controlling stem cell-fate determination. Herein, we have characterized the effects of miRNAs in differentiated human neural stem cells (hNSCs) by using a cell line currently being tested in clinical trials for stroke disability (NCT01151124, Clinicaltrials.gov).

Methods

HNSCs were differentiated on 2- (2D) and 3-dimensional (3D) cultures for 1 and 3 weeks. Quantification of hNSC differentiation was measured with real-time PCR and axon outgrowth. The miRNA PCR arrays were implemented to investigate differential expression profiles in differentiated hNSCs. Evaluation of miRNA effects on hNSCs was performed by using transfection of miRNA mimics, real-time PCR, Western blot, and immunocytochemistry.

Results

The 3D substrate promoted enhanced hNSC differentiation coupled with a loss of cell proliferation. Differentiated hNSCs exhibited a similar miRNA profiling. However, in 3D samples, the degree and timing of regulation were significantly different in miRNA members of cluster mi-R17 and miR-96-182, and hsa-miR-302a. Overall, hNSC 3D cultures demonstrated differential regulation of miRNAs involved in hNSC stemness, cell proliferation, and differentiation.

The miRNA mimic analysis of hsa-miR-146b-5p and hsa-miR-99a confirmed induction of lineage-committed progenitors. Downregulated miRNAs were more abundant; those most significantly downregulated were selected, and their putative target mRNAs analyzed with the aim of unraveling their functionality. In differentiated hNSCs, downregulated hsa-miR-96 correlated with SOX5 upregulation of gene and protein expression; similar results were obtained for hsa-miR-302a, hsa-miR-182, hsa-miR-7, hsa-miR-20a/b, and hsa-miR-17 and their target NR4A3. Moreover, SOX5 was identified as a direct target gene of hsa-miR-96, and NR43A, a direct target of hsa-miR-7 and hsa-mir-17 by luciferase reporter assays. Therefore, the regulatory role of these miRNAs may occur through targeting NR4A3 and SOX5, both reported as modulators of cell-cycle progression and axon length.

Conclusions

The results provide new insight into the identification of specific miRNAs implicated in hNSC differentiation. These strategies may be exploited to optimize in vitro hNSC differentiation potential for use in preclinical studies and future clinical applications.

Particle self-assembly at ionic liquid-based interfaces

This review presents an overview of the nature of ionic liquid (IL)-based interfaces and self-assembled particle morphologies of IL-in-water, oil- and water-in-IL, and novel IL-in-IL Pickering emulsions with emphasis on their unique phenomena, by means of experimental and computational studies. In IL-in-water Pickering emulsions, particles formed monolayers at ionic liquid-water interfaces and were close-packed on fully covered emulsion droplets or aggregated on partially covered droplets. Interestingly, other than equilibrating at the ionic liquid-water interfaces, microparticles with certain surface chemistries were extracted into the ionic liquid phase with a high efficiency. These experimental findings were supported by potential of mean force calculations, which showed large energy drops as hydrophobic particles crossed the interface into the IL phase. In the oil- and water-in-IL Pickering emulsions, microparticles with acidic surface chemistries formed monolayer bridges between the internal phase droplets rather than residing at the oil/water-ionic liquid interfaces, a significant deviation from traditional Pickering emulsion morphology. Molecular dynamics simulations revealed aspects of the mechanism behind this bridging phenomenon, including the role of the droplet phase, surface chemistry, and inter-particle film. Novel IL-in-IL Pickering emulsions exhibited an array of self-assembled morphologies including the previously observed particle absorption and bridging phenomena. The appearance of these morphologies depended on the particle surface chemistry as well as the ILs used. The incorporation of particle self-assembly with ionic liquid science allows for new applications at the intersection of these two fields, and have the potential to be numerous due to the tunability of the ionic liquids and particles incorporated, as well as the particle morphology by combining certain groups of particle surface chemistry, IL type (protic or aprotic), and whether oil or water is incorporated.

Porous TiO₂ materials through Pickering high-internal phase emulsion templating

We report a facile method for preparing porous structured TiO2 materials by templating from Pickering high-internal phase emulsions (HIPEs). A Pickering HIPE with an internal phase of up to 80 vol %, stabilized by poly(N-isopropylacrylamide)-based microgels and TiO2 solid nanoparticles, was first formulated and employed as a template to prepare the porous TiO2 materials with an interconnected structure. The resultant materials were characterized by scanning electron microscopy, X-ray diffraction, and mercury intrusion. Our results showed that the parent emulsion droplets promoted the formation of macropores and interconnecting throats with sizes of ~50 and ~10 μm, respectively, while the interfacially adsorbed microgel stabilizers drove the formation of smaller pores (~100 nm) throughout the macroporous walls after drying and sintering. The interconnected structured network with the bimodal pores could be well preserved after calcinations at 800 °C. In addition, the photocatalytic activity of the fabricated TiO2 was evaluated by measuring the photodegradation of Rhodamine B in water. Our results revealed that the fabricated TiO2 materials are good photocatalysts, showing enhanced activity and stability in photodegrading organic molecules.

Achieving interconnected pore architecture in injectable PolyHIPEs for bone tissue engineering

Template polymerization of a high internal phase emulsion (polyHIPE) is a relatively new method to produce tunable high-porosity scaffolds for tissue regeneration. This study focuses on the development of biodegradable injectable polyHIPEs with interconnected porosity that have the potential to fill bone defects and enhance healing. Our laboratory previously fabricated biodegradable polyHIPEs that cure in situ upon injection; however, these scaffolds possessed a closed-pore morphology, which could limit bone ingrowth. To address this issue, HIPEs were fabricated with a radical initiator dissolved in the organic phase rather than the aqueous phase of the emulsion. Organic-phase initiation resulted in macromer densification forces that facilitated pore opening during cure. Compressive modulus and strength of the polyHIPEs were found to increase over 2 weeks to 43±12 MPa and 3±0.2 MPa, respectively, properties comparable to cancellous bone. The viscosity of the HIPE before cure (11.0±2.3 Pa·s) allowed for injection and filling of the bone defect, retention at the defect site during cure under water, and microscale integration of the graft with the bone. Precuring the materials before injection allowed for tuning of the work and set times. Furthermore, storage of the HIPEs before cure for 1 week at 4°C had a negligible effect on pore architecture after injection and cure. These findings indicate the potential of these emulsions to be stored at reduced temperatures and thawed in the surgical suite before injection. Overall, this work highlights the potential of interconnected propylene fumarate dimethacrylate polyHIPEs as injectable scaffolds for bone tissue engineering.

Macroporous antibacterial hydrogels with tunable pore structures fabricated by using Pickering high internal phase emulsions as templates

Pickering-based antibacterial hydrogels with tunable pore structures were fabricated by using high internal phase emulsion templates.