Three-dimensional nanoporous gold/gold nanoparticles substrate for surface-enhanced Raman scattering detection of illegal additives in food

Owing to their nanoscale size and porous structure, both colloidal gold nanoparticles (AuNPs) and nanoporous gold (NPG) have demonstrated good and stable surface-enhanced Raman scattering (SERS) activity, and are therefore widely used as SERS substrates for the rapid detection of various components in food, environmental, biological, and other samples. In this study, we fabricated a novel, sensitive, and reproducible composite three-dimensional (3D) substrate for rapid SERS-based detection of illegal additives in food products. AuNPs and NPGs were prepared by chemical reduction and chemical dealloying methods, with the particle size of AuNPs about 60 nm and the pore size of NPG in the range of 5-36 nm. The AuNPs were then assembled on the surface of NPG to form the composite substrate 3D-NPG/AuNPs, which was characterized by transmission electron microscopy, scanning electron microscopy, X-ray diffraction, and other methods. Finally, the new SERS substrate combined with a portable Raman spectrometer was used to detect the illegal food additives 6-benzylaminopurine and melamine, with detection limits of 1 × 10-9 M and 5 × 10-7 M respectively. We further analyzed the relationship between the dealloying time-controlled morphology and the SERS properties of NPG, demonstrating that 3D-NPG/AuNPs as a novel SERS substrate have strong practical application potential in the rapid detection of food additives and other substances.

Rapid and ultrasensitive detection of thiram and carbaryl pesticide residues in fruit juices using SERS coupled with the chemometrics technique

A gold nanogap substrate was used to measure the thiram and carbaryl residues in various fruit juices using surface-enhanced Raman scattering (SERS). The gold nanogap substrates can detect carbaryl and thiram with limits of detection of 0.13 ppb (0.13 μgkg-1) and 0.22 ppb (0.22 μgkg-1). Raw SERS data were first preprocessed to reduce noise and undesirable effects and, were later used for model creation, implementing classification, and regression analysis techniques. The partial least-squares regression models achieved the highest prediction correlation coefficient (R2) of 0.99 and the lowest root mean square of prediction value below 0.62 ppb for both pesticide-infected juice samples. Furthermore, to differentiate between juice samples contaminated by both pesticides and control (pesticide-free), logistic-regression classification models were produced and achieved the highest classification accuracies of 100% and 99% for contaminated juice containing thiram and 100% accurate results for contaminated juice containing carbaryl. This indicates that the gold nanogap surface has significant potential for achieving high sensitivity in detecting trace contaminants in food samples.

Development of a cost-effective confocal Raman microscopy with high sensitivity

Confocal Raman microscopy is a powerful technique for identifying materials and molecular species; however, the signal from Raman scattering is extremely weak. Typically, handheld Raman instruments are cost-effective but less sensitive, while high-end scientific-grade Raman instruments are highly sensitive but extremely expensive. This limits the widespread use of Raman technique in our daily life. To bridge this gap, we explored and developed a cost-effective yet highly sensitive confocal Raman microscopy system. The key components of the system include an excitation laser based on readily available laser diode, a lens-grating-lens type spectrometer with high throughput and image quality, and a sensitive detector based on a linear charge-coupled device (CCD) that can be cooled down to -30 °C. The developed compact Raman instrument can provide high-quality Raman spectra with good spectral resolution. The 3rd order 1450 cm-1 peak of Si (111) wafer shows a signal-to-noise ratio (SNR) better than 10:1, demonstrating high sensitivity comparable to high-end scientific-grade Raman instruments. We also tested a wide range of different samples (organic molecules, minerals and polymers) to demonstrate its universal application capability.

Spinous Au@Ag Bimetallic Nanowires: Synthesis and In Situ Monitoring SERS of Plasmonic Catalysis

In situ monitoring of reactant transformations at metal catalyst surfaces and/or interfaces, combined with the identification of intermediate species and products, is vital for elucidating catalytic processes and behaviors. We developed innovative spinous Au@Ag nanowires (NWs) with a bimetallic structure and dense alloy protrusions, demonstrating both catalytic activity and surface-enhanced Raman spectroscopy (SERS) capabilities, thereby facilitating in situ SERS tracking of reactions. The spinous Au@Ag NWs exhibit sharp spikes on their surface, providing a large number of catalytically active sites. They demonstrate outstanding sensitivity, signal reproducibility, and homogeneity when detecting representative dye molecules like crystal violet. Furthermore, the spinous Au@Ag NWs exhibit outstanding catalytic performance, enhancing the separation and movement of photogenerated electron-hole pairs. This research offers important insights for the design of multifunctional SERS substrates and paves the way for new opportunities in the in situ monitoring of catalytic processes.

Tailor-Made Gold Nanomaterials for Applications in Soft Bioelectronics and Optoelectronics

In modern nanoscience and nanotechnology, gold nanomaterials are indispensable building blocks that have demonstrated a plethora of applications in catalysis, biology, bioelectronics, and optoelectronics. Gold nanomaterials possess many appealing material properties, such as facile control over their size/shape and surface functionality, intrinsic chemical inertness yet with high biocompatibility, adjustable localized surface plasmon resonances, tunable conductivity, wide electrochemical window, etc. Such material attributes have been recently utilized for designing and fabricating soft bioelectronics and optoelectronics. This motivates to give a comprehensive overview of this burgeoning field. The discussion of representative tailor-made gold nanomaterials, including gold nanocrystals, ultrathin gold nanowires, vertically aligned gold nanowires, hard template-assisted gold nanowires/gold nanotubes, bimetallic/trimetallic gold nanowires, gold nanomeshes, and gold nanosheets, is begun. This is followed by the description of various fabrication methodologies for state-of-the-art applications such as strain sensors, pressure sensors, electrochemical sensors, electrophysiological devices, energy-storage devices, energy-harvesting devices, optoelectronics, and others. Finally, the remaining challenges and opportunities are discussed.

Umbrella-frame silicon nanorod arrays decorated with Au nanoparticles as recyclable SERS substrates

Surface-enhanced Raman scattering (SERS) is a powerful technique for detection and identification of trace amounts of molecules with high specificity. A variety of two- and three-dimensional (3D) SERS substrates have been developed. Among these SERS substrates, to further develop new morphology of 3D SERS-active substrate with robust SERS functionality is still desired and necessary. In this paper, what we believe to be a novel and effective SERS-active substrate based on large-scale 3D Si hierarchical nanoarrays in conjunction with homogeneous Au nanoparticles (AuNPs) was proposed. Its building block shaped like the umbrella-frame structure was fabricated by a simple and cost-effective top-down nanofabrication method. Such umbrella-frame structure achieved excellent SERS performance with high sensitivity and spatial uniformity. For R6G molecules, the detection limit can be as low as 10^-14 M, with an enhancement factor of up to 10⁷. The relative standard deviation can reach about 11% above 30 positions across an area of 100×100 μm². This is mainly attributed to much more active-sites provided by the umbrella-frame structure for adsorption of target molecules and AuNPs, and sufficient 3D hotspots generated by the coupling between the SiNRs guided mode and AuNPs localized surface plasmon resonance (LSPR), as well as that between AuNPs LSPR. Especially by introducing the umbrella-ribs SiNRs and AuNPs, the light field can be greatly confined to the structure surface, creating strongly enhanced and even zero-gap fields in 3D space. Moreover, the proposed SERS-active substrate can be erased and reused multiple times by plasma cleaning and exhibits typically excellent recyclability and stability for robust SERS activity. The experimental results demonstrate the proposed substrate may serve as a promising SERS platform for trace detection of chemical and biological molecules.

Flexible, stretchable, and single-molecule-sensitive SERS-active sensor for wearable biosensing applications

The development of wearable sensors for remote patient monitoring and personalized medicine has led to a revolution in biomedical technology. Plasmonic metasurfaces that enhance Raman scattering signals have recently gained attention as wearable sensors. However, finding a flexible, sensitive, and easy-to-fabricate metasurface has been a challenge for decades. In this paper, a novel wearable device, the flexible, stretchable, and single-molecule-sensetive SERS-active sensor, is proposed. This device offers an unprecedented SERS enhancement factor in the order of 1011, along with other long-desired characteristics for SERS applications such as a high scattering to absorption ratio (∼2.5) and a large hotspot volume (40 nm × 40 nm × 5 nm). To achieve flexibility, we use polydimethylsiloxane (PDMS) as the substrate, which is stable, transparent, and biologically compatible. Our numerical calculations show that the proposed sensor offers reliable SERS performance even under bending (up to 100° angles) or stretching (up to 50% stretch). The easy-to-fabricate and flexible nature of our sensor offers a promising avenue for developing highly sensitive wearable sensors for a range of applications, particularly in the field of personalized medicine and remote patient monitoring.

Nanospray-assisted deposition of silver nanoparticles for mapping of a peptide in nanofibrous layers via surface-enhanced Raman spectrometry

Surface-enhanced Raman spectrometry (SERS) is a universal detection tool identifying molecules via vibrations of their chemical bonds. Its function requires the close localization of metal nanostructures and the analyte. In this work, we present a lab-made instrumentation for the deposition of silver nanoparticles on a strongly hydrophilic nanofibrous composite via a nanospray for SERS mapping of an incorporated peptide. The nanospray-sample distance was revealed as the most crucial parameter since it directly influences the moisture of the deposited colloid. Residual water was recognized as a sensitivity enhancer. Additionally, we continuously introduced a solution of sodium chloride to the colloid increasing its ionic strength, which formed a more homogeneous profile of the deposit. After the deposition process, the treated sample was scanned via a SERS laser and the collected Raman spectra were transformed into a distribution map of the peptide at a concentration of 5 μg/g.

Selective recognition of the amyloid marker single thioflavin T using DNA origami-based gold nanobipyramid nanoantennas

The development of effective methods for the detection of protein misfolding is highly beneficial for early stage medical diagnosis and the prevention of many neurodegenerative diseases. Self-assembled plasmonic nanoantennas with precisely tunable nanogaps show extraordinary electromagnetic enhancement, generating extreme signal amplification imperative for the design of ultrasensitive biosensors for point of care applications. Herein, we report the custom arrangement of Au nanobipyramid (Au NBP) monomer and dimer nanoantennas engineered precisely based on the DNA origami technique. Furthermore, we demonstrate the SERS based detection of thioflavin T (ThT), a well-established marker for the detection of amyloid fibril formation, where G-Quadruplexes govern the site-specific attachment of ThT in the plasmonic hotspot. This is the first study for the SERS based detection of the ThT dye attached specifically using a G-Quadruplex complex. The spectroscopic signals of ThT were greatly enhanced due to the designed nanoantennas demonstrating their potential as superior SERS substrates. This study paves the way for boosting the design of next-generation diagnostic tools for the specific and precise detection of various target disease biomarkers using molecular probes.

Nanogap-Rich Surface-Enhanced Raman Spectroscopy-Active Substrate Based on Double-Step Deposition and Annealing of the Au Film over the Back Side of Polished Si

Surface-enhanced Raman spectroscopy (SERS) is a highly sensitive and rapid detection technique that is used for detection of various analytes in trace quantities. We present a sensitive, large-area, and nanogap-rich SERS-active substrate by altering a thin gold (Au) film on the unpolished side of a single-side polished silicon wafer by repeated thermal deposition and annealing in an argon environment. The repeated thermal deposition and annealing process was compared on both sides of a one-side-polished silicon wafer; however, the rear side (etched/unpolished side) demonstrated a more enhanced Raman signal owing to the larger effective area. The proposed substrate can be fabricated easily, having a high density of hotspots distributed uniformly all over the substrate. This ensures easy, rapid, and sensitive detection of analytes with a high degree of reproducibility, repeatability, and acceptable uniformity. The optimized substrate shows a high degree of stability with time when exposed to the ambient environment for a longer duration of 148 days. The reported substrate can detect up to 10-11 M concentrations of 2,4,6-trinitrotoluene (TNT) and 2,4-dinitrotoluene (DNT), with limits of detection (LODs) of 1.22 and 1.26 ng/L, respectively. This work not only presents the efficient and sensitive SERS-active substrate but also shows the advantages of using the rear side of a one-side-polished silicon substrate as a SERS-active chip.

Rapid Fabrication of Fe and Pd Thin Films as SERS-Active Substrates via Dynamic Hydrogen Bubble Template Method

Fe and Pd thin film samples have been fabricated in a rapid fashion utilizing the versatile technique of dynamic hydrogen bubble template (DHBT) method via potentiostatic electrodeposition over a copper substrate. The morphology of the samples is dendritic, with the composition being directly proportional to the deposition time. All the samples have been tested as SERS substrates for the detection of Rhodamine 6G (R6G) dye. The samples perform very well, with the best performance shown by the Pd samples. The lowest detectable R6G concentration was found to be 10^-6 M (479 μgL^-1) by one of the Pd samples with the deposition time of 180 s. The highest enhancement of signals noticed in this sample can be attributed to its morphology, which is more nanostructured compared to other samples, which is extremely conducive to the phenomenon of localized surface plasmon resonance (LSPR). Overall, these samples are cheaper, easy to prepare with a rapid fabrication method, and show appreciable SERS performance.

Highly porous gold supraparticles as surface-enhanced Raman spectroscopy (SERS) substrates for sensitive detection of environmental contaminants

Surface-enhanced Raman spectroscopy (SERS) has great potential as an analytical technique for environmental analyses. In this study, we fabricated highly porous gold (Au) supraparticles (i.e., ∼100 μm diameter agglomerates of primary nano-sized particles) and evaluated their applicability as SERS substrates for the sensitive detection of environmental contaminants. Facile supraparticle fabrication was achieved by evaporating a droplet containing an Au and polystyrene (PS) nanoparticle mixture on a superamphiphobic nanofilament substrate. Porous Au supraparticles were obtained through the removal of the PS phase by calcination at 500 °C. The porosity of the Au supraparticles was readily adjusted by varying the volumetric ratios of Au and PS nanoparticles. Six environmental contaminants (malachite green isothiocyanate, rhodamine B, benzenethiol, atrazine, adenine, and gene segment) were successfully adsorbed to the porous Au supraparticles, and their distinct SERS spectra were obtained. The observed linear dependence of the characteristic Raman peak intensity for each environmental contaminant on its aqueous concentration reveals the quantitative SERS detection capability by porous Au supraparticles. The limit of detection (LOD) for the six environmental contaminants ranged from ∼10 nM to ∼10 μM, which depends on analyte affinity to the porous Au supraparticles and analyte intrinsic Raman cross-sections. The porous Au supraparticles enabled multiplex SERS detection and maintained comparable SERS detection sensitivity in wastewater influent. Overall, we envision that the Au supraparticles can potentially serve as practical and sensitive SERS devices for environmental analysis applications.

Menezes L, Tittl A, Ren H, Maier SA. Optical Metasurfaces for Energy Conversion

Nanostructured surfaces with designed optical functionalities, such as metasurfaces, allow efficient harvesting of light at the nanoscale, enhancing light-matter interactions for a wide variety of material combinations. Exploiting light-driven matter excitations in these artificial materials opens up a new dimension in the conversion and management of energy at the nanoscale. In this review, we outline the impact, opportunities, applications, and challenges of optical metasurfaces in converting the energy of incoming photons into frequency-shifted photons, phonons, and energetic charge carriers. A myriad of opportunities await for the utilization of the converted energy. Here we cover the most pertinent aspects from a fundamental nanoscopic viewpoint all the way to applications.

Miniaturized Raman Instruments for SERS-Based Point-of-Care Testing on Respiratory Viruses

As surface-enhanced Raman scattering (SERS) has been used to diagnose several respiratory viruses (e.g., influenza A virus subtypes such as H1N1 and the new coronavirus SARS-CoV-2), SERS is gaining popularity as a method for diagnosing viruses at the point-of-care. Although the prior and quick diagnosis of respiratory viruses is critical in the outbreak of infectious disease, ELISA, PCR, and RT-PCR have been used to detect respiratory viruses for pandemic control that are limited for point-of-care testing. SERS provides quantitative data with high specificity and sensitivity in a real-time, label-free, and multiplex manner recognizing molecular fingerprints. Recently, the design of Raman spectroscopy system was simplified from a complicated design to a small and easily accessible form that enables point-of-care testing. We review the optical design (e.g., laser wavelength/power and detectors) of commercialized and customized handheld Raman instruments. As respiratory viruses have prominent risk on the pandemic, we review the applications of handheld Raman devices for detecting respiratory viruses. By instrumentation and commercialization advancements, the advent of the portable SERS device creates a fast, accurate, practical, and cost-effective analytical method for virus detection, and would continue to attract more attention in point-of-care testing.

In Situ Collection and Rapid Detection of Pathogenic Bacteria Using a Flexible SERS Platform Combined with a Portable Raman Spectrometer

This study aims to develop a simple, sensitive, low-cost, environmentally friendly and flexible surface-enhanced Raman scattering (SERS) platform, combined with a portable Raman spectrometer, for the rapid and on-site SERS detection of bacteria. Commercial tobacco packaging paper (TPP) with little background interference was used as a loading medium that effectively adsorbed Au nanoparticles and provided sufficient "hot spots". This Au-tobacco packaging paper (Au-TPP) substrate used as a flexible SERS platform can maximize sample collection by wiping irregular surfaces, and was successfully applied to the on-site and rapid detection of pathogenic bacteria. Raman fingerprints of pathogenic bacteria can be obtained by SERS detection of spiked pork using wipeable Au-TPP, which verifies its value in practical applications. The results collected by SERS were further verified by polymerase chain reaction (PCR) results. It showed several advantages in on-site SERS detection, including accurate discrimination, simple preparation, easy operation, good sensitivity, accuracy and reproducibility. This study indicates that the established flexible SERS platform has good practical applications in pathogenic bacterial identification and other rapid detections.

Single-Molecule Surface-Enhanced Raman Spectroscopy

Single-molecule surface-enhanced Raman spectroscopy (SM-SERS) has the potential to detect single molecules in a non-invasive, label-free manner with high-throughput. SM-SERS can detect chemical information of single molecules without statistical averaging and has wide application in chemical analysis, nanoelectronics, biochemical sensing, etc. Recently, a series of unprecedented advances have been realized in science and application by SM-SERS, which has attracted the interest of various fields. In this review, we first elucidate the key concepts of SM-SERS, including enhancement factor (EF), spectral fluctuation, and experimental evidence of single-molecule events. Next, we systematically discuss advanced implementations of SM-SERS, including substrates with ultra-high EF and reproducibility, strategies to improve the probability of molecules being localized in hotspots, and nonmetallic and hybrid substrates. Then, several examples for the application of SM-SERS are proposed, including catalysis, nanoelectronics, and sensing. Finally, we summarize the challenges and future of SM-SERS. We hope this literature review will inspire the interest of researchers in more fields.

Breaking Down SERS Detection Limit: Engineering of a Nanoporous Platform for High Sensing and Technology

In this study, nanoporous gold (NPG) was synthesized by free corrosion dealloying of an amorphous precursor, Au20Cu48Ag7Pd5Si20 (at. %), in a mixture of nitric and hydrofluoric acid, starting from amorphous melt-spun ribbons. NPG revealed a 3D nanoporous structure composed of pores and multigrain ligaments of an average size of 60 nm. NPG was further anodized in oxalic acid at 8 V vs. Ag/AgCl reference electrode to obtain a bimodal morphology composed of ligaments disrupted in finer features. Both NPG and anodized samples (A-NPG) were found to be mechanically stable to bending and active for surface-enhanced Raman scattering (SERS). SERS activity of samples was investigated using 4,4'-bipyridine as a probe molecule. A detection limit of 10-16 M was found for both samples, but in A-NPG, the signal was strongly enhanced. The extremely high enhancement obtained for A-NPG is attributed both to the small size of ligaments and crystals of which they are made, as well as to the nanometric features resulting from anodization treatment. Such a microstructure showed homogenous SERS response in terms of average enhancement all across the surface, as demonstrated by mapping measurements. Furthermore, NPG and A-NPG were tested as electrodes for electrocatalytic applications, showing good properties. The engineering steps from the amorphous precursor to A-NPG led us to obtain a high-sensing platform, with extremely low detection limit and intrinsic properties, that might significantly contribute to the cutting-edge technology of the future.

Dimensional Design for Surface-Enhanced Raman Spectroscopy

Surface-enhanced Raman spectroscopy (SERS) is a vibrational spectroscopy technique that enables specific identification of target analytes with sensitivity down to the single-molecule level by harnessing metal nanoparticles and nanostructures. Excitation of localized surface plasmon resonance of a nanostructured surface and the associated huge local electric field enhancement lie at the heart of SERS, and things will become better if strong chemical enhancement is also available simultaneously. Thus, the precise control of surface characteristics of enhancing substrates plays a key role in broadening the scope of SERS for scientific purposes and developing SERS into a routine analytical tool. In this review, the development of SERS substrates is outlined with some milestones in the nearly half-century history of SERS. In particular, these substrates are classified into zero-dimensional, one-dimensional, two-dimensional, and three-dimensional substrates according to their geometric dimension. We show that, in each category of SERS substrates, design upon the geometric and composite configuration can be made to achieve an optimized enhancement factor for the Raman signal. We also show that the temporal dimension can be incorporated into SERS by applying femtosecond pulse laser technology, so that the SERS technique can be used not only to identify the chemical structure of molecules but also to uncover the ultrafast dynamics of molecular structural changes. By adopting SERS substrates with the power of four-dimensional spatiotemporal control and design, the ultimate goal of probing the single-molecule chemical structural changes in the femtosecond time scale, watching the chemical reactions in four dimensions, and visualizing the elementary reaction steps in chemistry might be realized in the near future.

Development of spray-drying-based surface-enhanced Raman spectroscopy

We report a spray-drying method to fabricate silver nanoparticle (AgNP) aggregates for application in surface-enhanced Raman spectroscopy (SERS). A custom-built system was used to fabricate AgNP aggregates of four sizes, 48, 86, 151, and 218 nm, from drying droplets containing AgNPs atomized from an AgNP suspension. Sample solutions of Rhodamine B (RhB) at 10^-6, 10^-8, and 10^-10 M concentrations were dropped onto the AgNP aggregates as probe molecules to examine the enhancement of the Raman signals of the RhB. The ordering of the analytical enhancement factors (AEFs) by aggregate size at a 10^-6 M RhB was 86 nm > 218 nm > 151 nm > 48 nm. When RhB concentrations are below 10^-8 M, the 86 and 151 nm AgNP aggregates show clear RhB peaks. The AEFs of the 86 nm AgNP aggregates were the highest in all four aggregates and higher than those of the 218-nm aggregates, although the 218-nm aggregates had more hot spots where Raman enhancement occurred. This finding was attributable to the deformation and damping of the electron cloud in the highly aggregated AgNPs, reducing the sensitivity for Raman enhancement. When RhB was premixed with the AgNP suspension prior to atomization, the AEFs at 10^-8 M RhB rose ~ 100-fold compared to those in the earlier experiments (the post-dropping route). This significant enhancement was probably caused by the increased opportunity for the trapping of the probe molecules in the hot spots.

Novel Clarification of Surface Plasmon Coupling Reactions of Aromatic Alkynamine and Nitro Compounds

This work presents a theoretical and experimental approach for the coupling of 4-ethynylaniline (4-APA) and 4-ethynylnitrobenzene (4-NPA) in the theoretical application of density functional theory (DFT) and experimental monitoring of surface-enhanced Raman spectroscopy (SERS). The results support electromagnetic enhancement to drive the conversion of aromatic alkynamine and nitro compounds and regulation by the catalytic coupling reaction conditions. In addition, this work investigates the adsorption site effect of surface plasmon coupling reactions of 4-APA and 4-NPA molecules into alkynyl azo compounds. This study presents theoretical and experimental images used to analyze the plasmon-driven surface catalytic reaction system.

Influence of bulky substituents on single-molecule SERS sensitivity

The surface-enhanced Raman spectroscopy (SERS) detection limit strongly depends on the molecular structure, which we demonstrate for a family of tert-butyl-substituted porphycenes. Even though the investigated species present very similar photophysical properties, the ratio between the SERS signal and fluorescence background depends on the number of bulky tert-butyl groups. Moreover, the probability of single molecule detection systematically drops with the number of the moieties attached to the pyrrole ring. As steric hindrance is the only significantly changing feature among the studied chromophores, we attribute the observed phenomena to the spatial structure. We also show that the sensitivity of the SERS technique can be improved by lowering the temperature. We managed to observe single-molecule spectra for derivatives for which this was unattainable at room temperature.

Bio-inspired Nanoenzyme Synthesis and Its Application in A Portable Immunoassay for Food Allergy Proteins

Nanozymes as a cost-effective and robust enzyme mimic have attracted widespread attention in the development of novel analytical methods. Herein, a new nanozyme-enhanced surface-enhanced Raman scattering (SERS) immunoassay platform was successfully developed using a peroxidase-mimicking nanozyme to replace the natural enzymes as a catalytic label of the enzyme-linked immunosorbent assay for the detection of allergy proteins. In this platform, the peroxidase-mimicking nanozymes as a catalytic label could catalyze the oxidation of the Raman-inactive reporter [i.e., leucomalachite green (LMG)] to generate Raman-active malachite green (MG) with H₂O₂. Moreover, the produced MG Raman signal was further enhanced by the formed Raman "hot spot" through MG-induced gold nanoparticle aggregation, which could be recorded by a portable Raman spectrometer. On this basis, the established nanozyme-enhanced SERS immunoassay showed improved accuracy, high sensitivity, and good selectivity and was used for accurate quantification of α-lactalbumin (α-LA). With this method, α-LA could be detected with a limit of detection as low as 0.01 ng/mL. Moreover, the method was also verified by performing in food samples and showed satisfactory recoveries and high reliability. This study not only provides insight into the use of a nanozyme to establish new analytical methods but also broadens the applications of nanozymes in a food safety assay.

Manipulating Hot-Electron Injection in Metal Oxide Heterojunction Array for Ultrasensitive Surface-Enhanced Raman Scattering

Efficient photoinduced charge transfer (PICT) resonance is crucial to the surface-enhanced Raman scattering (SERS) performance of metal oxide substrates. Herein, we venture into the hot-electron injection strategy to achieve unprecedented enhanced PICT efficiency between substrates and molecules. A heterojunction array composed of plasmonic MoO₂ and semiconducting WO_3-x is designed to prove the concept. The plasmonic MoO₂ generates intense localized surface plasmon resonance under illumination, which can generate near-field Raman enhancement as well as accompanied plasmon-induced hot-electrons. The hot-electron injection in direct interfacial charge transfer and plasmon-induced charge transfer process can effectively promote the PICT efficiency between substrates and molecules, achieving a record Raman enhancement factor among metal oxide substrates (2.12 × 10⁸) and the ultrasensitive detection of target molecule down to 10^-11 M. This work demonstrates the possibility of hot-electron manipulation to realize unprecedented Raman enhancement in metal oxides, offering a cutting-edge strategy to design high-performance SERS substrates.

Combined Paper Centrifugal Chromatographic Separation and SERS Detection for Multicomponent Substances

The separation and chemical analysis of mixtures in an emergency situation represent major challenges, especially in remote or poverty-stricken areas. A novel method was developed for the rapid separation and detection of multiple components via paper centrifugal chromatography, which costs as little as $2.26 US. The method was realized based on the combination of portable paper centrifugal chromatography and surface-enhanced Raman scattering (SERS) detection. This coupled technique was successfully implemented for the separation and qualitative analysis of a rhodamine 6G-crystal violet mixture and a colorless aniline-pyrocatechol-benzidine mixture. A chromatographic mobile phase was collected using absorbent cotton, which was demonstrated to have no effect on the SERS results. The optimized device achieved rapid and effective separation of the colorless aniline-pyrocatechol-benzidine mixture with a high centrifugal force (0.3303π² N). The newly developed method involving multicomponent paper centrifugal chromatography-SERS detection will be of great value for emergency-related substance separation and analysis in remote and poor areas.

Microporous Oxide-Based Surface-Enhanced Raman Scattering Film for Quadrillionth Detection of Mercury Ion (II)

A variety of chemical sensing materials and procedures for conveniently detecting mercuric ion (II) (Hg2+) have been extensively explored. The detection challenges for accomplishing a simple, fast, and low investment procedure at the ultrasensitive level are ongoing. Herein we report a quadrillionth level for detecting Hg2+ by the surface-enhanced Raman scattering (SERS) technique. There is an interaction of silver nanoparticles decorated on a zinc-oxide tetrapod structure and coated on FTO glass (Ag@ZnO-FTO) with an organic ligand. 4,4′-Dipyridyl (DPy) performed as being chemisorbed by Ag nanoparticles interacting with a pyridine ring to produce plasmonic hot spots for SERS. The morphology of the surface and porous structure of the tetrapod becomes the powerful platform for enhanced SERS performance of DPy detection. In the absence of the augmentative electrolyte, the enhancement factor for DPy is more than 107. The inhibiting of the aggregation between Ag and DPy was present following the appearance of Hg2+, demonstrated by the quenching of the SERS signal from the DPy molecules. The capability to reproduce and the selectivity of the sensing by DPy were both demonstrated. In addition, the applications for detecting Hg2+ in natural water and beverages were successfully detected. These results demonstrated the SERS sensors had the potential for detecting Hg2+ in practical use.

Silver melamine thin film as a flexible platform for SERS analysis

New SERS detection platforms are required for the quick and easy preparation of sensing devices for food, agriculture, and environmental science. For quantitative sensing, it is important that a sensing material, in addition to efficient sensing, provides extraction and concentration of the target molecules such as toxic pesticides or healthy vitamins. We design such films adopting the Liesegang rings formation process that includes the reaction-diffusion of silver nitrate and melamine followed by the precipitation of different intermediates and their reduction by light in a pectin medium. Surprisingly, we find that the presence of melamine provides an excellent substrate for the extraction of pollutants at the solid-liquid interface giving rise to a powerful but easy and fast method for the quantification of fruits' quality. The complex silver and melamine containing films show high sensitivity even at relatively low silver concentrations.

Dynamic electrical measurement of biomolecule behavior via plasmonically-excited nanogap fabricated by electromigration

The dynamic motion of DNA oligomers at the nanoscale gap between nanoelectrodes is measured under plasmonic excitation using laser irradiation. The use of a nanogap enables highly sensitive detection of individual molecules using an electrical readout or an optical readout such as Raman spectroscopy. However, the target molecule must reach the nanogap in order to be detected. This study focuses on the use of plasmonic excitation to trap molecules at the nanogap surface. The nanogap electrode is fabricated by electromigration and is, therefore, a much smaller nanogap than the top-down fabrication in the conventional plasmonic trapping studies. To demonstrate the individual molecule detection and to investigate the molecular behavior, the molecules are monitored using an electrical readout under a bias voltage instead of an optical readout used in the conventional studies. The conductance change due to DNA oligomer penetration to the nanogap is observed with the irradiated light intensity of over 1.23 mW. The single-molecule detection is confirmed irradiating the laser to the nanogap. The results suggest that DNA oligomers are spontaneously attracted and concentrated to the nanogap corresponding to the detection point, resulting in high detection probability and sensitivity.

Surface-enhanced Raman scattering-active AuNR array cellulose films for multi-hazard detection

In this study, we report a surface-enhanced Raman scattering (SERS)-active array film, which is based on regenerated cellulose hydrogels and gold nanorods (AuNRs), by combining a silicon rubber mask with a vacuum filtration method. This strategy enables the direct AuNR array formation on hydrogel surface with a precisely controlled number density. Moreover, the control of interparticle nanogap has been realized by the spatial deformation of hydrogels. A decrease in gaps between AuNRs deposited on hydrogels can result in SERS enhancement because 3D porous hydrogel structures turned into 2D closely packed hydrogel films during drying. In our experiments, SERS sensor arrays show excellent SERS activity to detect rhodamine 6 G and thiram down to 10 pM and 100 fM with competitive enhancement factors of 3.9 × 10⁸ and 9.5 × 10⁹, respectively. Importantly, the resultant SERS-active arrays with nine sensor units can efficiently detect nine different analytes on a single substrates at a time. Moreover, we demonstrate that physical bending has little effect on the SERS activity of flexible AuNR array hydrogel films, which indicates the high reproducibility of SERS measurement. This SERS array film has great potential to simultaneously detect multiple hazards for the practical application of SERS analysis.

A disposable paper-based hydrophobic substrate for highly sensitive surface-enhanced Raman scattering detection

Detection of target analytes with high sensitivity and reproducibility remains a challenge for surface-enhanced Raman scattering (SERS) due to the lack of cost-effective and highly sensitive substrates. In this study, a hydrophobic SERS substrate capable of concentrating nanoparticles and analytes was prepared by spin-coating lubricating liquid onto commercial paper. The condensation effect of the paper-based hydrophobic substrate induced aggregation of gold nanoparticles (Au NPs) to generate ''hot spots'' for SERS and to drive analytes to the hot-spot areas for more sensitive detection. The obtained SERS signal intensity was 5-fold higher than that obtained using common paper, and a detection limit (LOD) of 4.3 × 10^-10 M for rhodamine 6G (R6G) was achieved. Randomly selected points on the substrate and different batches of substrates all exhibited high reproducibility, and the relative standard deviation (RSD) at 1362 cm^-1 is approximately 11%. A further application of the hydrophobic substrate was demonstrated by the detection of cytochrome C within a linear detection range of 3.90 × 10^-8 M-1.25 × 10^-6 M. In addition, the prepared substrate can obtain identifiable SERS spectra of cancer cells and non-cancer cells because a large number of AuNP or Au NPs clusters can adhere to cells, resulting in the construction of a 3D hotspot matrix. The disposable hydrophobic paper substrate eliminates the problem of solution diffusion, and also provides an effective platform for biomolecular screening detection.

Quantitative Drug Dynamics Visualized by Alkyne-Tagged Plasmonic-Enhanced Raman Microscopy

Visualizing live-cell uptake of small-molecule drugs is paramount for drug development and pharmaceutical sciences. Bioorthogonal imaging with click chemistry has made significant contributions to the field, visualizing small molecules in cells. Furthermore, recent developments in Raman microscopy, including stimulated Raman scattering (SRS) microscopy, have realized direct visualization of alkyne-tagged small-molecule drugs in live cells. However, Raman and SRS microscopy still suffer from limited detection sensitivity with low concentration molecules for observing temporal dynamics of drug uptake. Here, we demonstrate the combination of alkyne-tag and surface-enhanced Raman scattering (SERS) microscopy for the real-time monitoring of drug uptake in live cells. Gold nanoparticles are introduced into lysosomes of live cells by endocytosis and work as SERS probes. Raman signals of alkynes can be boosted by enhanced electric fields generated by plasmon resonance of gold nanoparticles when alkyne-tagged small molecules are colocalized with the nanoparticles. With time-lapse 3D SERS imaging, this technique allows us to investigate drug uptake by live cells with different chemical and physical conditions. We also perform quantitative evaluation of the uptake speed at the single-cell level using digital SERS counting under different quantities of drug molecules and temperature conditions. Our results illustrate that alkyne-tag SERS microscopy has a potential to be an alternative bioorthogonal imaging technique to investigate temporal dynamics of small-molecule uptake of live cells for pharmaceutical research.

Nano-substructured plasmonic pore arrays: a robust, low cost route to reproducible hierarchical structures extended across macroscopic dimensions

Plasmonic nanostructures are important across diverse applications from sensing to renewable energy. Periodic porous array structures are particularly attractive because such topography offers a means to encapsulate or capture solution phase species and combines both propagating and localised plasmonic modes offering versatile addressability. However, in analytical spectroscopic applications, periodic pore arrays have typically reported weaker plasmonic signal enhancement compared to particulate structures. This may be addressed by introducing additional nano-structuring into the array to promote plasmonic coupling that promotes electric field-enhancement, whilst retaining pore structure. Introducing nanoparticle structures into the pores is a useful means to promote such coupling. However, current approaches rely on either expensive top-down methods or on bottom-up methods that yield random particle placement and distribution. This report describes a low cost, top-down technique for preparation of nano-sub-structured plasmonic pore arrays in a highly reproducible manner that can be applied to build arrays extending over macroscopic areas of mm2 to cm2. The method exploits oxygen plasma etching, under controlled conditions, of the cavity encapsulated templating polystyrene (PS) spheres used to create the periodic array. Subsequent metal deposition leads to reproducible nano-structuring within the wells of the pore array, coined in-cavity nanoparticles (icNPs). This approach was demonstrated across periodic arrays with pore/sphere diameters ranging from 500 nm to 3 μm and reliably improved the plasmonic properties of the substrate across all array dimensions compared to analogous periodic arrays without the nano-structuring. The enhancement factors achieved for metal enhanced emission and surface enhanced Raman spectroscopy depended on the substrate dimensions, with the best performance achieved for nanostructured 2 μm diameter pore arrays, where a more than 104 improvement over Surface Enhanced Raman Spectroscopy (SERS) and 200-fold improvement over Metal Enhanced Fluorescence (MEF) were observed for these substrates compared with analogous unmodified pore arrays. The experiments were supported by Finite-Difference Time-Domain (FDTD) calculations used to simulate the electric field distribution as a function of pore nano-structuring.

ZIF-8-modified Au-Ag/Si nanoporous pillar array for active capture and ultrasensitive SERS-based detection of pentachlorophenol

A novel SERS substrate based on a zeolitic imidazolate framework-8 (ZIF-8) film-modified Au-Ag/Si nanoporous pillar array (ZIF-8/Au-Ag/Si-NPA) was successfully fabricated for pentachlorophenol (PCP) detection. The Au-Ag/Si-NPA was synthesized through immersion plating and replacement reaction on the Si-NPA, which was prepared by the hydrothermal etching. The ZIF-8 film was coated via layer-by-layer growth technique. The ZIF-8 film is nanoporous and its thickness can be controlled by varying the growing number, which can significantly influence the SERS performance of the substrate. The substrate with optimal ZIF-8 thickness exhibited an excellent SERS response to PCP molecules. The SERS enhancement factor reached up to 1.8 × 10⁷ and the detection limit was down to 10^-13 M. Moreover, the substrate showed good uniformity with a relative standard deviation (RSD) of 8.7% and good selectivity. The PCP detection is hardly interfered by the coexisting organic compounds. The high SERS performance may be due to the enrichment effect of the ZIF-8 film. The ZIF-8 film could capture and enrich the trace PCP molecules by electrostatic interaction between the negatively charged PCP^- and the positively charged ZIF-8. This work suggests that the ZIF-8/Au-Ag/Si-NPA substrate has potential application in SERS analysis of the polar organic pollutant detection in environmental media.

Fabrication and SERS properties of complex and organized nanoparticle plasmonic clusters stable in solution

SERS activity can be increased by the formation of hot spots at the interparticle junctions of plasmonic nanoparticles in very close proximity, dramatically improving the enhancement factors in comparison with isolated nanoparticles. Controlling the number and geometrical architecture of hot spots, while endowing the clusters with colloidal stability, results in feasible optical sensors, able to provide quantitative SERS responses. Here, we review the approaches proposed to date to produce colloidal stable clusters, focusing on the control of the coordination number of nanoparticle assemblies and interparticle gaps. Clusters of spherical nanoparticles of the same size and rods of the same size are described to subsequently outline core-satellite constructs of nanoparticles of different sizes. Besides, purification processes for nanoparticle clusters are revised to provide efficient production in high yields.

Surface Enhanced Raman Spectroscopy in environmental analysis, monitoring and assessment

Environmental pollution is usually monitored via mass spectrometry-based approaches. Such techniques are extremely sensitive but have several disadvantages. The instruments themselves are expensive, require specialized training to use and usually cannot be taken into the field. Samples also usually require extensive pre-treatment prior to analysis which can affect the final result. The development of analytical methods that matched the sensitively of mass spectrometry but that could be deployed in the field and require minimal sample processing would be highly advantageous for environmental monitoring. One method that may meet these criteria is Surface Enhanced Raman Spectroscopy (SERS). This is a surface-sensitive technique that enhances Raman scattering by molecules adsorbed on rough nanostructure surfaces such as gold or silver nanoparticles. SERS gives selective spectral enhancement such that increases in sensitivity of 10¹⁰ to 10¹⁴ have been reported. While this means SERS is, theoretically at least, capable of single molecule detection such a signal enhancement is hard to achieve in practice. In this review the background of SERS is introduced for the environmental scientist and the recent literature on the detection of several classes of environmental pollutants using this technique is discussed. For heavy metals the lowest limit of detection reported was 0.45 μg/L for Mercury; for pharmaceuticals, 2.4 μg/L for propranolol; for endocrine disruptors, 0.35 μg/L for 17β-estradiol; for perfluorinated compounds, 500 μg/L for perfluorooctanoic acid and for inorganic pollutants, 37g/L for general pesticide markers. The signal enhancements achieved in each case show great promise for the detection of pollutants at environmentally relevant concentrations and, although it does not yet routinely match the sensitivity of mass spectrometry. Further work to develop SERS methods and apply them for the detection of contaminants could be of wide benefit for environmental science.

3D Ultrasensitive Polymers-Plasmonic Hybrid Flexible Platform for In-Situ Detection

This paper introduces a three-dimensional (3D) pyramid to the polymers-plasmonic hybrid structure of polymethyl methacrylate (PMMA) composite silver nanoparticle (AgNPs) as a higher quality flexible surface-enhanced Raman scattering (SERS) substrate. Benefiting from the effective oscillation of light inside the pyramid valley could provide wide distributions of 3D “hot spots” in a large space. The inclined surface design of the pyramid structure could facilitate the aggregation of probe molecules, which achieves highly sensitive detection of rhodamine 6G (R6G) and crystal violet (CV). In addition, the AgNPs and PMMA composite structures provide uniform space distribution for analyte detection in a designated hot spot zone. The incident light can penetrate the external PMMA film to trigger the localized plasmon resonance of the encapsulated AgNPs, achieving enormous enhancement factor (~6.24×108). After undergoes mechanical deformation, the flexible SERS substrate still maintains high mechanical stability, which was proved by experiment and theory. For practical applications, the prepared flexible SERS substrate is adapted to the in-situ Raman detection of adenosine aqueous solution and the methylene-blue (MB) molecule detection of the skin of a fish, providing a direct and nondestructive active-platform for the detecting on the surfaces with any arbitrary morphology and aqueous solution.

Recent advances in cellulose-based membranes for their sensing applications

ABSTRACT

In recent years, sensing applications have played a very important role in various fields. As a novel natural material, cellulose-based membranes with many merits can be served as all kinds of sensors. This review summarizes the recent progress of cellulose membranes as sensors, mainly focusing on their preparation processes and sensing properties. In addition, the opportunities and challenges of cellulose membrane-based sensors are also prospected. This review provides some references for the design of cellulose membrane materials for sensing applications in the future.

Analytical control of Rhodamine B by SERS using reduced graphene decorated with copper selenide

A novel approach for the decoration of reduced graphene oxide with copper selenide (CuSe-rGO), using supercritical carbon dioxide (sc-CO₂) as a medium, was developed and proposed as a new substrate for surface-enhanced Raman spectroscopy (SERS) to determine Rhodamine B in chili powder. The synthesized materials graphene oxide (GO), reduced graphene oxide (rGO) and CuSe-rGO were characterized by Raman spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM). All SERS spectra were obtained by using a portable Raman spectrometer. The procedure presented involves a simple and rapid sample pretreatment in order to determine Rhodamine B in chili powder, with a limit of quantification of 44.5 ng g^-1. The recovery values of the proposed method resulted in the 96% to 99% range, with RSD values from 2.4% to 3.0%. The developed SERS active hybrid substrate has an enhancement factor higher than those using gold or silver nanoparticles, providing a clear improvement in the sensitivity.

Synthesis of MBA-Encoded Silver/Silica Core-Shell Nanoparticles as Novel SERS Tags for Biosensing Gibberellin A3 Based on Au@Fe3O4 as Substrate

A surface-enhanced Raman scattering (SERS) tag is proposed for high-sensitivity detection of gibberellin A3 (GA3). Silver nanoparticles (AgNPs) were synthesized using citrate reduction. 4-Mercaptobenzoic acid (MBA) was used for the Raman-labeled molecules, which were coupled to the surface of the AgNPs using sulfydryls. MBA was coated with silica using the Stöber method to prevent leakage. GA3 antibodies were attached via the active functional groups N-Hydroxysuccinimide (NHS) and N-Ethyl-N'-(3-dimethylaminopropyl)carbodiimide hydrochloride (EDC) to construct a novel immuno-AgNPs@SiO2 SERS tags. The captured SERS substrates were fabricated through Fe3O4 nanoparticles and gold nanoparticles (AuNPs) using chemical methods. These nanoparticles were characterized using ultraviolet-visible spectroscopy (UV-Vis), dynamic light scattering, Raman spectroscopy, transmission electron microscope (TEM), and X-ray diffraction (XRD). This immuno-AgNPs@SiO2 SERS tags has a strong SERS signal based on characterizations via Raman spectroscopy. Based on antigen-antibody reaction, the immuno-Au@Fe3O4 nanoparticles can capture the GA3 and AgNPs@SiO2 SERS tags. Due to the increasing number of captured nanoprobes, the SERS signal from MBA was greatly enhanced, which favored the sensitive detection of GA3. The linear equation for the SERS signal was y = -13635x + 202211 (R2 = 0.9867), and the limit of detection (LOD) was 10-10 M. The proposed SERS tags are also applicable for the detection of other food risk factors.

SERS discrimination of single DNA bases in single oligonucleotides by electro-plasmonic trapping

Surface-enhanced Raman spectroscopy (SERS) sensing of DNA bases by plasmonic nanopores could pave a way to novel methods for DNA analyses and new generation single-molecule sequencing platforms. The SERS discrimination of single DNA bases depends critically on the time that a DNA strand resides within the plasmonic hot spot. In fact, DNA molecules flow through the nanopores so rapidly that the SERS signals collected are not sufficient for single-molecule analysis. Here, we report an approach to control the residence time of molecules in the hot spot by an electro-plasmonic trapping effect. By directly adsorbing molecules onto a gold nanoparticle and then trapping the single nanoparticle in a plasmonic nanohole up to several minutes, we demonstrate single-molecule SERS detection of all four DNA bases as well as discrimination of single nucleobases in a single oligonucleotide. Our method can be extended easily to label-free sensing of single-molecule amino acids and proteins.

Recyclable three-dimensional Ag nanorod arrays decorated with O-g-C3N4 for highly sensitive SERS sensing of organic pollutants

A three-dimensional (3D) substrate was developed by assembling a monolayer of graphitic carbon nitride (O-g-C₃N₄) on Ag nanorod arrays (Ag NRs) for sensitive and recyclable surface enhanced Raman scattering (SERS) detection. The prepared Ag NRs/O-g-C₃N₄ substrate not only generated a significant Raman enhancement effect as a result of the strong π-π stacking interaction between O-g-C₃N₄ and the analytes but also possessed excellent self-cleaning property via visible-light irradiation that was attributed to its outstanding catalytic performance. Highly sensitive SERS detection could be achieved with a LOD of 8.2 × 10^-10 M for R6 G, and the substrate could be used repeatedly for at least four cycles with tolerable intensity attenuation. In addition, the 3D substrate exhibited long-term stability originating from the electron-donor effect of O-g-C₃N₄ and high reproducibility due to the uniform decoration of O-g-C₃N₄ on the Ag NRs through the strong interaction. Furthermore, using Ag NRs/O-g-C₃N₄, the recyclable detection of antibiotics in a water sample was demonstrated with high sensitivity, which indicates that the 3D Ag NRs/O-g-C₃N₄ substrate is a promising candidate for eliminating the challenges of single-use SERS substrates and building a portable SERS platform to sense organic molecular species.

Size-Selected Submicron Gold Spheres: Controlled Assembly onto Metal, Carbon, and Plastic Substrates

Size-selected submicron spheres become very useful building blocks if the spheres could be synthesized and integrated at any desired position. In particular, spheres having a similar size to visible-light wavelength have attracted much attention. Here, we show the synthesis and assembly of size-selected submicron gold spheres using pulsed laser ablation of a gold plate in a supercritical fluid. Four findings were obtained in the study. Submicron spheres with a narrow size distribution were generated, and the polydispersity was ≈ 6%. The average diameter was controlled from 600 to 1000 nm. A thermodynamic condition for scalable synthesis was found. The assembly of spheres onto a metal, carbon, or plastic substrate was accomplished.

A Critical Review on Enhancement of Photocatalytic Hydrogen Production by Molybdenum Disulfide: From Growth to Interfacial Activities

Ultrathin 2D molybdenum disulfide (MoS₂ ), which is the flagship of 2D transition-metal dichalcogenide nanomaterials, has drawn much attention in the last few years. 2D MoS₂ has been banked as an alternative to platinum for highly active hydrogen evolution reaction because of its low cost, high surface-to-volume ratio, and abundant active sites. However, when MoS₂ is used directly as a photocatalyst, contrary to public expectation, it still performs poorly due to lateral size, high recombination ratio of excitons, and low optical cross section. Besides, simply compositing MoS₂ as a cocatalyst with other semiconductors cannot satisfy the practical application, which stimulates the pursual of a comprehensive insight into recent advances in synthesis, properties, and enhanced hydrogen production of MoS₂ . Therefore, in this Review, emphasis is given to synthetic methods, phase transitions, tunable optical properties, and interfacial engineering of 2D MoS₂ . Abundant ways of band edge tuning, structural modification, and phase transition are addressed, which can generate the neoteric photocatalytic systems. Finally, the main challenges and opportunities with respect to MoS₂ being a cocatalyst and coherent light-matter interaction of MoS₂ in photocatalytic systems are proposed.

A Review on Surface-Enhanced Raman Scattering

Surface-enhanced Raman scattering (SERS) has become a powerful tool in chemical, material and life sciences, owing to its intrinsic features (i.e., fingerprint recognition capabilities and high sensitivity) and to the technological advancements that have lowered the cost of the instruments and improved their sensitivity and user-friendliness. We provide an overview of the most significant aspects of SERS. First, the phenomena at the basis of the SERS amplification are described. Then, the measurement of the enhancement and the key factors that determine it (the materials, the hot spots, and the analyte-surface distance) are discussed. A section is dedicated to the analysis of the relevant factors for the choice of the excitation wavelength in a SERS experiment. Several types of substrates and fabrication methods are illustrated, along with some examples of the coupling of SERS with separation and capturing techniques. Finally, a representative selection of applications in the biomedical field, with direct and indirect protocols, is provided. We intentionally avoided using a highly technical language and, whenever possible, intuitive explanations of the involved phenomena are provided, in order to make this review suitable to scientists with different degrees of specialization in this field.

Ultrasensitive SERS detection of specific oligonucleotides based on Au@AgAg bimetallic nanorods

We synthesized a novel and sensitive Au/Ag bimetallic SERS-active nanotag, Au-Ag-Ag core-shell-shell nanorod (Au@AgAgNR). The Au@AgAgNR nanotag exhibited a strong SERS signal and was easily assembled from bilayer silver shells on an Au nanorod (AuNR) core with embedded Raman reporter molecules in the core-shell-shell gaps. The SERS activity of the nanotags was investigated with 2-mercaptopyridine (2-Mpy) as a Raman reporter, which could form pyridine/Ag⁺ coordination complexes to mediate the formation of silver shells. Specific enhancement of Raman signals was observed in the following order: AuNR < Au@AgNR < Au@AgAgNR. Then, Au@AgAgNR nanotags were coupled with magnetic beads (MBs) via specific DNA hybridization as a SERS sensor with a detection limit of 1 fM for a segment of the gene HPV-16. Factors affecting sensitivity and selectivity were investigated, including Raman dye concentration, silver nitrate dosage and the response to similar oligonucleotides. The proposed SERS sensor is expected to be a facile and sensitive method for specific gene detection.

Aptasensors for pesticide detection

Pesticide contamination has become one of the most serious problems of public health in the world, due to their wide application in agriculture industry to guarantee the crop yield and quality. The detection of pesticide residues plays an important role in food safety management and environment protection. However, the conventional detection methodologies cannot realize highly sensitive, selective and on-site detection, which limits their applications. Aptamers are short single-stranded oligonucleotides (RNA or DNA) selected by SELEX method, which can selectively bind to their targets with high affinity. Compared with the commonly used antibodies or enzymes in designing biosensors, aptamers exhibit better stability, low molecular weight, easy modification and low cost, and were regarded as excellent candidates for developing aptasensors for pesticide detection. In this review, application of aptamers for pesticide detection was reviewed. Firstly, aptamers specifically bind to various pesticides were first summarized. Secondly, the progresses and highlights of developing aptasensors for highly-sensitive and selective detection of pesticide residues were systematically provided. Finally, the present challenges and future perspectives for developing novel highly-effective aptasensor for the detection of pesticide residues were discussed.