Bimetallic dendrimer-encapsulated nanoparticles as catalysts: a review of the research advances

Advances in functionalization and conjugation mechanisms of dendrimers with iron oxide magnetic nanoparticles

Iron oxide magnetic nanoparticles (MNPs) are crucial in various areas due to their unique magnetic properties. However, their practical use is often limited by instability and aggregation in aqueous solutions. This review explores the advanced technique of dendrimer functionalization to enhance MNP stability and expand their application potential. Dendrimers, with their symmetric and highly branched structure, effectively stabilize MNPs and provide tailored functional sites for specific applications. We summarize key synthetic modifications, focusing on the impacts of dendrimer size, surface chemistry, and the balance of chemical (e.g., coordination, anchoring) and physical (e.g., electrostatic, hydrophobic) interactions on nanocomposite properties. Current challenges such as dendrimer toxicity, control over dendrimer distribution on MNPs, and the need for biocompatibility are discussed, alongside potential solutions involving advanced characterization techniques. This review highlights significant opportunities in environmental, biomedical, and water treatment applications, stressing the necessity for ongoing research to fully leverage dendrimer-functionalized MNPs. Insights offered here aim to guide further development and application of these promising nanocomposites.

Fast synthesis of nanoporous Cu/Ag bimetallic triangular nanoprisms via galvanic replacement for efficient 4-nitrophenol reduction

We report the synthesis of nanoporous Cu/Ag bimetallic triangular nanoprisms (BTNPs) using a galvanic replacement method. Based on ultraviolet-visible spectroscopy (UV-vis), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution TEM (HRTEM), X-ray diffraction (XRD), energy dispersive spectrometry (EDS), selected area electron diffraction (SAED) and X-ray photoelectron spectroscopy (XPS) analyses, the structure of Cu/Ag BTNPs was characterized. The prepared Cu/Ag BTNPs exhibited excellent catalytic activity and good cycling stability for the reduction of 4-nitrophenol (4-NP) due to the synergistic effect between Cu and Ag elements. The kinetic rate constant (k) and turnover frequency (TOF) values reached 331 × 10-3 s-1 and 500 × 10-3 s-1, respectively, which were higher than those of previously reported Cu, Ag, Au, Cu/Ag or Cu/Au-based catalysts. We hope that the development of promising routes for high-quality BTNPs can broaden their applications in catalysis and environmental sustainability.

Biomimetic Control over Bimetallic Nanoparticle Structure and Activity via Peptide Capping Ligand Sequence

The controlled design of bimetallic nanoparticles (BNPs) is a key goal in tailoring their catalytic properties. Recently, biomimetic pathways demonstrated potent control over the distribution of different metals within BNPs, but a direct understanding of the peptide effect on the compositional distribution at the interparticle and intraparticle levels remains lacking. We synthesized two sets of PtAu systems with two peptides and correlated their structure, composition, and distributions with the catalytic activity. Structural and compositional analyses were performed by a combined machine learning-assisted refinement of X-ray absorption spectra and Z-contrast measurements by scanning transmission electron microscopy. The difference in the catalytic activities between nanoparticles synthesized with different peptides was attributed to the details of interparticle distribution of Pt and Au across these markedly heterogeneous systems, comprising Pt-rich, Au-rich, and Au core/Pt shell nanoparticles. The total amount of Pt in the shells of the BNPs was proposed to be the key catalytic activity descriptor. This approach can be extended to other systems of metals and peptides to facilitate the targeted design of catalysts with the desired activity.

Tuning Pd-to-Ag Ratio to Enhance the Synergistic Activity of Fly Ash-Supported PdxAgy Bimetallic Nanoparticles

Fly ash (FA)-supported bimetallic nanoparticles (PdxAgy/FA) with varying Pd:Ag ratios were prepared by coprecipitation of Pd and Ag involving in situ reduction of Pd(II) and Ag(I) salts in aqueous medium. All the supported nanoparticles were thoroughly characterized with the aid of powder X-ray diffraction (PXRD), X-ray photoelectron spectroscopy (XPS), electron microscopy (field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM)), and elemental analyses, which include inductively coupled plasma-optical emission spectroscopy (ICP-OES) and energy-dispersive X-ray spectroscopy (EDS). A gradual broadening and shifting of PXRD peaks, ascribable to Ag, to higher angles with an increase in the Pd:Ag ratio affirms the alloying of interface between Pd and Ag nanoparticles. The coexistence of Pd and Ag was further confirmed by EDS elemental mapping as well as by the presence of bimetallic lattices on the FA surface, as evident from the high-resolution TEM analysis. The dependency of crystallite size and average size of bimetallic nanoparticles on Ag loading (mol %) was elucidated with the help of a combination of PXRD and TEM studies. Based on XPS analysis, the charge transfer phenomenon between contacting Pd-Ag sites could be evident from the shifting of 3d core electron binding energy for both Pd and Ag compared with monometallic Pd and Ag nanoparticles. Following a pseudo-first-order reaction kinetics, all the nanocatalysts were able to efficiently reduce 4-nitrophenol into 4-aminophenol in aqueous NaBH4. The superior catalytic performance of the bimetallic nanocatalysts (PdxAgy/FA) over their monometallic (Pd100/FA and Ag100/FA) analogues has been demonstrated. Moreover, the tunable synergistic effect of the bimetallic systems has been explored in detail by varying the Pd:Ag mol ratio in a systematic manner which in turn allowed us to achieve an optimum reaction rate (k = 1.050 min-1) for the nitrophenol reduction using a Pd25Ag75/FA system. Most importantly, all the bimetallic nanocatalysts explored here exhibited excellent normalized rate constants (K ≈ 6000-15,000 min-1 mmol-1) compared with other supported bimetallic Pd-Ag nanocatalysts reported in the literature.

Galvanic Bipolar Electrode Arrays with Self-Driven Optical Readouts

In this work, we report a bipolar electrode (BPE) array system with self-driven optical readouts of the faradic current flowing through the BPEs. The BPE array system is based on the spontaneous redox reactions that are respectively occurring at opposite poles of the BPEs with appropriate electrocatalysts on the poles; this system is analogous to one consisting of galvanic electrochemical cells. The galvanic BPE array system operates in a self-powered mode that requires there to be neither a direct electrical connection nor external electrical polarization to each BPE. Importantly, the appropriate electrocatalysts on the poles play a critical role in the galvanic BPE array system to induce the spontaneous redox reactions occurring at the poles of BPEs. Moreover, the galvanic BPE array system provides self-driven optical readouts, including fluorometric and colorimetric ones, to report the faradaic current resulting from the spontaneous redox reactions on the BPE poles. Based on the unique benefits that the galvanic BPE array system has over conventional BPEs, we demonstrated the promising potential of galvanic BPE arrays for the simple yet rapid and quantitative screening of electrocatalysts for the oxygen reduction reaction as well as sensitive sensing of H2O2 in parallel.

Interplay between Nanoparticles and Phosphorus Dendrimers, and Their Properties

This review presents the state of the art of interactions between two different families of nanoobjects: nanoparticles-mainly metal nanoparticles, and dendrimers-mainly phosphorhydrazone dendrimers (or dendrons). The review firstly presents the encapsulation/protection of existing nanoparticles (organic or metallic) by phosphorus-based dendrimers and dendrons. In the second part, several methods for the synthesis of metal nanoparticles, thanks to the dendrimer that acts as a template, are presented. The properties of the associations between dendrimers and nanoparticles are emphasized throughout the review. These properties mainly concern the elaboration of diverse types of hybrid materials, some of them being used as sensitive chemosensors or biosensors. Several examples concerning catalysis are also given, displaying in particular the efficient recovery and reuse of the catalytic entities.

Methods for Green Synthesis of Metallic Nanoparticles Using Plant Extracts and their Biological Applications - A Review

Nanotechnology, a fast-developing branch of science, is gaining extensive popularity among researchers simply because of the multitude of applications it can offer. In recent years, biological synthesis has been widely used instead of physical and chemical synthesis methods, which often produce toxic products. These synthesis methods are now being commonly adapted to discover new applications of nanoparticles synthesized using plant extracts. In this review, we elucidate the various ways by which nanoparticles can be biologically synthesized. We further discuss the applications of these nanoparticles.

Dynamic Pt-OH-·H2O-Ag species mediate coupled electron and proton transfer for catalytic hydride reduction of 4-nitrophenol at the confined nanoscale interface

Generally, the catalytic transformation of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) at heterogeneous metal surfaces follows a Langmuir-Hinshelwood (L-H) mechanism when sodium borohydride (NaBH₄) is used as the sacrificial reductant. Herein, with Pt-Ag bimetallic nanoparticles confined in dendritic mesoporous silica nanospheres (DMSNs) as a model catalyst, we demonstrated that the conversion of 4-NP did not pass through the direct hydrogen transfer route with the hydride equivalents being supplied by borohydride via the bimolecular L-H mechanism, since Fourier transform infrared (FTIR) spectroscopy with the use of isotopically labeled reactants (NaBD₄ and D₂O) showed that the final product of 4-AP was composed of protons (or deuterons) that originated from the solvent water (or heavy water). Combined characterization by X-ray photoelectron spectroscopy (XPS), ¹H nuclear magnetic resonance (NMR) and the optical excitation and photoluminescence spectrum evidenced that the surface hydrous hydroxide complex bound to the metal surface (also called structural water molecules, SWs), due to the space overlap of p orbitals of two O atoms in SWs, could form an ensemble of dynamic interface transient states, which provided the alternative electron and proton transfer channels for selective transformation of 4-NP. The cationic Pt species in the Ag-Pt bimetallic catalyst mainly acts as a dynamic adsorption center to temporally anchor SWs and related reactants, and not as the active site for hydrogen activation.

Fabrication of Bimetallic Cu-Ag Nanoparticle-Decorated Poly(cyclotriphosphazene-co-4,4'-sulfonyldiphenol) and Its Enhanced Catalytic Activity for the Reduction of 4-Nitrophenol

We reported a study on the preparation of bimetallic Ag-Cu nanoparticles (NPs) impregnated on PZS poly(cyclotriphosphazene-co-4,4'-sulfonyldiphenol) nanotubes via a facile and efficient reduction method. Herein, PZS nanotubes consisting of enriched hydroxyl groups are fabricated through an in situ template method, and then, fluctuating the amount ratios of Cu and Ag precursors, bimetallic NPs can be fabricated on readily prepared PZS nanotubes using NaBH4 as a reductant, which results in a series of bimetallic catalysts having tunable catalytic activity. The characterization investigations of scanning electron microscopy, X-ray diffraction, transmission electron microscopy, and Fourier transform infrared spectroscopy results show that Ag-Cu bimetallic NPs are well-dispersed, ultrasmall in size, and well-anchored on the surface of PZS nanotubes. In addition, to examine the catalytic activity and reusability of these nanocomposites, reduction of 4-nitrophenol to 4-aminophenol is utilized as a prototype reaction. The optimized Ag-Cu NPs with a copper ratio of 0.3% are well-stabilized by the organic-inorganic poly(cyclotriphosphazene-co-4,4'-sulfonyldiphenol) nanotubes. The obtained results show that bimetallic NPs have remarkably higher catalytic ability than that of their monometallic counterparts with maximum catalytic activity. These results are even better than those of noble metal-based bimetallic catalysts and pave the avenue to utilize the polyphosphazene polymer as a substrate material for highly effective bimetallic catalysts.

Heterogeneous Dendrimer-Based Catalysts

The present review compiles the advances in the dendritic catalysis within the last two decades, in particular concerning heterogeneous dendrimer-based catalysts and their and application in various processes, such as hydrogenation, oxidation, cross-coupling reactions, etc. There are considered three main approaches to the synthesis of immobilized heterogeneous dendrimer-based catalysts: (1) impregnation/adsorption on silica or carbon carriers; (2) dendrimer covalent grafting to various supports (silica, polystyrene, carbon nanotubes, porous aromatic frameworks, etc.), which may be performed in a divergent (as a gradual dendron growth on the support) or convergent way (as a grafting of whole dendrimer to the support); and (3) dendrimer cross-linking, using transition metal ions (resulting in coordination polymer networks) or bifunctional organic linkers, whose size, polarity, and rigidity define the properties of the resulted material. Additionally, magnetically separable dendritic catalysts, which can be synthesized using the three above-mentioned approaches, are also considered. Dendritic catalysts, synthesized in such ways, can be stored as powders and be easily separated from the reaction medium by filtration/centrifugation as traditional heterogeneous catalysts, maintaining efficiency as for homogeneous dendritic catalysts.

Au@Ag Core@Shell Nanoparticles Synthesized with Rumex hymenosepalus as Antimicrobial Agent

In this work, we used a sequential method of synthesis for gold-silver bimetallic nanoparticles with core@shell structure (Au@AgNPs). Rumex hymenosepalus root extract (Rh), which presents high content in catechins and stilbenes, was used as reductor agent in nanoparticles synthesis. Size distribution obtained by Transmission Electron Microscopy (TEM) gives a mean diameter of 36 ± 11 nm for Au@AgNPs, 24 ± 4 nm for gold nanoparticles (AuNPs), and 13 ± 3 nm for silver nanoparticles (AgNPs). The geometrical shapes of NPs were principally quasi-spherical. The thickness of the silver shell over AuNPs is around 6 nm and covered by active biomolecules onto the surface. Nanoparticles characterization included high angle annular dark field images (HAADF) recorded with a scanning transmission electron microscope (STEM), Energy-Dispersive X-ray Spectroscopy (EDS), X-Ray Diffraction (XRD), UV-Vis Spectroscopy, Zeta Potential, and Dynamic Light Scattering (DLS). Fourier Transform Infrared Spectrometer (FTIR), and X-ray Photoelectron Spectroscopy (XPS) show that nanoparticles are stabilized by extract molecules. A growth kinetics study was performed using the Gompertz model for microorganisms exposed to nanomaterials. The results indicate that AgNPs and Au@AgNPs affect the lag phase and growth rate of Escherichia coli and Candida albicans in a dose-dependent manner, with a better response for Au@AgNPs.

Three-Dimensional TEM Study of Dendrimer-Encapsulated Pt Nanoparticles for Visualizing Structural Characteristics of the Whole Organic-Inorganic Hybrid Nanostructure

Here, we report three-dimensional (3-D) visualization of dendrimer-encapsulated Pt nanoparticles (Pt DENs) by using 3-D electron tomography to reveal intricate structural characteristics of their whole organic-inorganic hybrid nanostructure. We reconstructed the 3-D spatial volume of Pt DENs by back-projecting a tilt series of two-dimensional (2-D) projections of Pt nanoparticles encapsulated inside dendrimers negatively stained with uranyl acetate. The direct 3-D visualization of Pt DENs elucidated their encapsulation characteristics with the spatial imaging of Pt nanoparticles embraced inside dendrimers in three dimensions. The encapsulation characteristics of Pt DENs were further verified with selective electrochemical poisoning experiments. In addition, quantitative 3-D structural characterization of Pt DENs provided more accurate and precise size distributions of nanoparticles than those obtained from conventional 2-D transmission electron microscopy analysis relying only on a 3-D structure projected on a 2-D plane.

Inorganic nanoparticles for reduction of hexavalent chromium: Physicochemical aspects

Hexavalent Chromium [Cr(VI)] is a highly carcinogenic and toxic material. It is one of the major environmental contaminants in aquatic system. Its removal from aqueous medium is a subject of current research. Various technologies like adsorption, membrane filtration, solvent extraction, coagulation, biological treatment, ion exchange and chemical reduction for removal of Cr(VI) from waste water have been developed. But chemical reduction of Cr(VI) to Cr(III) has attracted a lot of interest in the past few years because, the reduction product [Cr(III)] is one of the essential nutrients for organisms. Various nanoparticles based systems have been designed for conversion of Cr(VI) into Cr(III) which have not been critically reviewed in literature. This review present recent research progress of classification, designing and characterization of various inorganic nanoparticles reported as catalysts/reductants for rapid conversion of Cr(VI) into Cr(III) in aqueous medium. Kinetics and mechanism of nanoparticles enhanced/catalyzed reduction of Cr(VI) and factors affecting the reduction process have been discussed critically. Personal future insights have been also predicted for further development in this area.

Kinetically Controlled Sequential Seeded Growth: A General Route to Crystals with Different Hierarchies

The organization of natural materials into hierarchical structures accounts for the amazing properties of many biological systems; however, translating the structural motifs present in such natural materials to synthetic systems remains difficult. Inspired by how nature creates materials, this work demonstrates that kinetically controlled sequential seeded growth is a general bottom-up strategy to prepare hierarchical inorganic crystals with distinct compositions and nanostructured forms. Specifically, 85 distinct hierarchical crystals with different shape-controlled features, compositions, and overall symmetries were readily achieved by altering the kinetics of metal deposition in sequential rounds of seeded growth. These modifications in the deposition kinetics were achieved through simple changes to the reaction conditions (e.g., pH or halide concentration) and dictate whether concave or convex features are produced at specific seed locations, much in the manner that the changing atmospheric conditions account for the hierarchical and symmetrical structures of snow crystals. As such, this work provides a general paradigm for the bottom-up synthesis of hierarchical crystals regardless of inorganic material class.

Facile Synthesis, Characterization, Anti-Microbial and Anti-Oxidant Properties of Alkylamine Functionalized Dumb-Bell Shaped Copper-Silver Nanostructures

Admirable studies have been established on the utilization of ligand-materials as bimetallic nanoparticles in the field of nanoscience and biotechnology. UV-Vis, XRD, HR-TEM, STEM-HAADF, EDS, FTIR, and DPPH analyses characterized the optical, structural, compositional morphological, and antioxidant properties of synthesized Cu-Ag nanostructures. The spectrum of UV-Vis exhibited absorption bands at 590 and 413 nm, which reflects the surface plasmon resonance of copper-silver nanostructures. Herein, our exploration of alkylamine stabilized copper/silver nanostructures while using hexadecylamine as capping material and their primary biomedical investigation on antimicrobial and antioxidant studies is reported. Cu-Ag bimetallic nanostructures were more effective against gram-negative bacteria E. coli and Klebsiella when compared to gram-positive bacteria. The antioxidant activity of Cu-Ag nanoparticles was comparable with Ascorbic acid.

Fly ash supported Pd-Ag bimetallic nanoparticles exhibiting a synergistic catalytic effect for the reduction of nitrophenol

Coal fly ash (FA) supported Pd-Ag bimetallic nanoparticles (FA-Pd-Ag) were prepared by reducing Pd(II) and Ag(I) salts together onto the dispersed solid support in aqueous medium. Electron microscope analysis (FE-SEM, HRTEM) in combination with elemental mapping (EDS) suggests that the nanoparticles are well dispersed on fly ash with an average diameter of 6-8 nm. The powder XRD analysis indicates that alloying of the interface occurs between Pd and Ag nanoparticles in FA-Pd-Ag, while XPS reveals that charge transfer takes place between the Pd and Ag moieties that come into contact with each other. The FA-Pd-Ag in aqueous NaBH4 solution exhibits an efficient catalytic reduction of 4-nitrophenol into 4-aminophenol and follows pseudo-first-order reaction kinetics (kPd-Ag = 0.7176 min-1). The higher rate constant for FA-Pd-Ag compared to that for their monometallic analogues (FA-Pd (kPd = 0.5449 min-1)) and (FA-Ag (kAg = 0.5572 min-1)) as well as their physical mixture ((FA-Pd + FA-Ag) (kPd+Ag = 0.4075 min-1)) suggests the synergistic catalytic effect of the bimetallic system. Moreover, the present bimetallic nanocatalyst exhibits the highest normalized rate constant (KPd-Ag ≈ 51 100 min-1 mmol-1) compared to the reported bimetallic Pd-Ag nanocatalysts.

Nanofabrication within unimolecular nanoreactors

Nanoparticles (NPs) have been a research focus over the last three decades owing to their unique properties and extensive applications. It is crucial to precisely control the features of NPs including topology, architecture, composition, size, surface and assembly because these features will affect their properties and then applications. Ingenious nanofabrication strategies have been developed to precisely control these features of NPs, especially for templated nanofabrication within predesigned nanoreactors. Compared with conventional nanoreactors (hard templates and supramolecular nanoreactors), unimolecular nanoreactors exhibit (1) covalently stable nanostructures uninfluenced by environmental variations, (2) extensively regulated features of the structure including topology, composition, size, surface and valence due to the rapid development of polymer chemistry, and (3) effective encapsulation of abundant guests with or without strong interaction to achieve the function of loading, delivery and conversion of guests. Thus, unimolecular nanoreactors have shown fascinating prospects as templates for nanofabrication. Various NPs with expected topologies (sphere, rod, tube, branch, and ring), architectures (compact, hollow, core-shell, and necklace-like), compositions (metal, metal oxide, semiconductor, doping, alloy, silica, and composite), sizes (generally 1-100 nm), surface properties (hydrophilic, hydrophobic, reactivity, valence and responsivity) and assemblies (oligomer, chain, and aggregate) can be fabricated easily within reasonably designed unimolecular nanoreactors in a programmable way. In this review, we provide a brief introduction of the properties and types of unimolecular nanoreactors, a condensed summary of representative methodologies of nanofabrication within various unimolecular nanoreactors and a predicted outlook of the potential further developments of this charming nanofabrication approach.

Precise Molecular Design for High-Performance Luminogens with Aggregation-Induced Emission

Precise design of fluorescent molecules with desired properties has enabled the rapid development of many research fields. Among the different types of optically active materials, luminogens with aggregation-induced emission (AIEgens) have attracted significant interest over the past two decades. The negligible luminescence of AIEgens as a molecular species and high brightness in aggregate states distinguish them from conventional fluorescent dyes, which has galvanized efforts to bring AIEgens to a wide array of multidisciplinary applications. Herein, the useful principles and emerging structure-property relationships for precise molecular design toward AIEgens with desirable properties using concrete examples are revealed. The cutting-edge applications of AIEgens and their excellent performance in enabling new research directions in biomedical theranostics, optoelectronic devices, stimuli-responsive smart materials, and visualization of physical processes are also highlighted.

Neural network assisted analysis of bimetallic nanocatalysts using X-ray absorption near edge structure spectroscopy

Trained neural networks are used to extract the first partial coordination numbers from XANES spectra. In bimetallic nanoparticles, the four local structure descriptors provide rich information on structural motifs.

In situ replacement of Cu-DEN: an approach for preparing a more noble metal nanocatalyst for catalytic use

The advantage of dendritic monodisperse macromolecules’ dual templating ability was useful in the formation of silica-supported copper nanoparticles Cu_n@SiO₂NPs.

Probing Atomic Distributions in Mono- and Bimetallic Nanoparticles by Supervised Machine Learning

Properties of mono- and bimetallic metal nanoparticles (NPs) may depend strongly on their compositional, structural (or geometrical) attributes, and their atomic dynamics, all of which can be efficiently described by a partial radial distribution function (PRDF) of metal atoms. For NPs that are several nanometers in size, finite size effects may play a role in determining crystalline order, interatomic distances, and particle shape. Bimetallic NPs may also have different compositional distributions than bulk materials. These factors all render the determination of PRDFs challenging. Here extended X-ray absorption fine structure (EXAFS) spectroscopy, molecular dynamics simulations, and supervised machine learning (artificial neural-network) method are combined to extract PRDFs directly from experimental data. By applying this method to several systems of Pt and PdAu NPs, we demonstrate the finite size effects on the nearest neighbor distributions, bond dynamics, and alloying motifs in mono- and bimetallic particles and establish the generality of this approach.

Mediated electrochemical synthesis of metal nanoparticles

The review integrates and analyzes data of original studies on the mediated electrosynthesis of metal nanoparticles — a new efficient and environmentally attractive process for obtaining these particles in the solution bulk. The general principles and specific features of electrosynthesis of metal nanoparticles by mediated electroreduction of metal ions and complexes are considered. The discussed issues include the role of cyclic voltammetry in the development of this method, the method efficiency, some aspects of selection of mediators, and aggregation, stabilization and catalytic activity of the metal nanoparticles thus obtained. Analysis of the results of mediated electrosynthesis of Pd, Ag, PdAg, Au, Pt and Cu nanoparticles stabilized by various compounds and mediated electrogeneration of highly active metal particles is used as basic data for discussion.

The bibliography includes 247 references.

A Facile and Scalable Route to the Preparation of Catalytic Membranes with in Situ Synthesized Supramolecular Dendrimer Particle Hosts for Pt(0) Nanoparticles Using a Low-Generation PAMAM Dendrimer (G1-NH2) as Precursor

Since the first reports of Cu dendrimer-encapsulated nanoparticles (DENs) published in 1998, the dendrimer-templating method has become the best and most versatile method for preparing ultrafine metallic and bimetallic nanoparticles (1-3 nm) with well-defined compositions, high catalytic activity, and tunable selectivity. However, DENs have remained for the most part model systems with limited prospects for scale up and integration into high-performance and reusable catalytic modules and systems for industrial-scale applications. Here, we describe a facile and scalable route to the preparation of catalytic polyvinylidene fluoride (PVDF) membranes with in situ synthesized supramolecular dendrimer particles (SDPs) that can serve as hosts and containers for Pt(0) nanoparticles (2-3 nm). These new catalytic membranes were prepared using a reactive encapsulation process similar to that utilized to prepare Pt DENs by addition of a reducing agent (sodium borohydride) to aqueous complexes of Pt(II) + G4-OH/G6-OH polyamidoamine (PAMAM) dendrimers. However, the SDPs (2.4 μm average diameter) of our new mixed matrix PVDF-PAMAM membranes were synthesized in the dope dispersion without purification prior to film casting using (i) a low-generation PAMAM dendrimer (G1-NH₂) as particle precursor and (ii) epichlorohydrin, an inexpensive functional reagent, as cross-linker. In addition, the membrane PAMAM particles contain secondary amine groups (∼1.9 mequiv per gram of dry membrane), which are more basic and thus have higher Pt binding affinity than the tertiary amine groups of the G4-OH and G6-OH PAMAM dendrimers. Proof-of-concept experiments show that our new PVDF-PAMAM-G1-Pt/membranes can serve as highly active and reusable catalysts for the hydrogenation of alkenes and alkynes to the corresponding alkanes using (i) H₂ at room temperature and a pressure of 1 bar and (ii) low catalyst loadings of ∼1.4-1.6 mg of Pt. Using cyclohexene as model substrate, we observed near quantitative conversion to cyclohexane (∼98%). The regeneration studies showed that our new Pt/membrane catalysts are stable and can be reused for five consecutive reaction cycles for a total duration of 120 h including 60 h of heating at 100 °C under vacuum for substrate, product, and solvent removal with no detectable loss of cyclohexene hydrogenation activity. The overall results of our study point to a promising, versatile, and scalable path for the integration of catalytic membranes with in situ synthesized SDP hosts for Pt(0) nanoparticles into high-throughput modules and systems for heterogeneous catalytic hydrogenations, an important class of reactions that are widely utilized in industry to produce pharmaceuticals, agrochemicals, and specialty chemicals.

Repetitively Coupled Chemical Reduction and Galvanic Exchange as a Synthesis Strategy for Expanding Applicable Number of Pt Atoms in Dendrimer-Encapsulated Pt Nanoparticles

In this study, we report the controllable synthesis of dendrimer-encapsulated Pt nanoparticles (Pt DENs) utilizing repetitively coupled chemical reduction and galvanic exchange reactions. The synthesis strategy allows the expansion of the applicable number of Pt atoms encapsulated inside dendrimers to more than 1000 without being limited by the fixed number of complexation sites for Pt²⁺ precursor ions in the dendrimers. The synthesis of Pt DENs is achieved in a short period of time (i.e., ∼10 min) simply by the coaddition of appropriate amounts of Cu²⁺ and Pt²⁺ precursors into aqueous dendrimer solution and subsequent addition of reducing agents such as BH₄^-, resulting in fast and selective complexation of Cu²⁺ with the dendrimers and subsequent chemical reduction of the complexed Cu²⁺ while uncomplexed Pt²⁺ precursors remain oxidized. Interestingly, the chemical reduction of Cu²⁺, leading to the formation of Cu nanoparticles encapsulated inside the dendrimers, is coupled with the galvanic exchange of the Cu nanoparticles with the nearby Pt²⁺. This coupling repetitively proceeds until all of the added Pt²⁺ ions form into Pt nanoparticles encapsulated inside the dendrimers. In contrast to the conventional method utilizing direct chemical reduction, this repetitively coupled chemical reduction and galvanic exchange enables a substantial increase in the applicable number of Pt atoms up to 1320 in Pt DENs while maintaining the unique features of DENs.

Nanoreactors for green catalysis

Sustainable and environmentally benign production are key drivers for developments in the chemical industrial sector, as protecting our planet has become a significant element that should be considered for every industrial breakthrough or technological advancement. As a result, the concept of green chemistry has been recently defined to guide chemists towards minimizing any harmful outcome of chemical processes in either industry or research. Towards greener reactions, scientists have developed various approaches in order to decrease environmental risks while attaining chemical sustainability and elegancy. Utilizing catalytic nanoreactors for greener reactions, for facilitating multistep synthetic pathways in one-pot procedures, is imperative with far-reaching implications in the field. This review is focused on the applications of some of the most used nanoreactors in catalysis, namely: (polymer) vesicles, micelles, dendrimers and nanogels. The ability and efficiency of catalytic nanoreactors to carry out organic reactions in water, to perform cascade reaction and their ability to be recycled will be discussed.

Dendrimer as a multifunctional capping agent for metal nanoparticles for use in bioimaging, drug delivery and sensor applications

Various strategies (single & multi-pot) to synthesize dendrimer-coated metal nanoparticles and their exploration in various biomedical applications.

Au–Fe nanoparticles visited by MD simulation: structural and thermodynamic properties affected by chemical composition

In this work, Fe–Au nanoalloys and Fe@Au core–shell nanoclusters are investigated via classical molecular dynamics simulation to determine the effect of their composition on their thermodynamic stability and melting mechanism.

Synthesis and hydrogenation application of Pt-Pd bimetallic nanocatalysts stabilized by macrocycle-modified dendrimer

Different generations of poly(propylene imine) (G _n -PPI) terminated with N-containing 15-membered triolefinic macrocycle (G _n M) (n = 2, 3, 4, 5) were prepared. The bimetallic nanoparticle catalysts G _n M-(Pt _x /Pd_10-x ) (x = 0, 3, 5, 7, 10) were prepared by the synchronous ligand-exchange reaction between G _n M and the complexes of Pt(PPh₃)₄ and Pd(PPh₃)₄. The structure and catalytic properties of G _n M-(Pt _x /Pd_10-x ) were characterized via Fourier transform infrared spectroscopy, ¹H nuclear magnetic resonance spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy, energy-dispersive spectroscopy and inductively coupled plasma atomic emission spectroscopy. The novel bimetallic Pd-Pt nanoparticle catalysts stabilized by dendrimers (DSNs) present higher catalytic activities for the hydrogenation of dimeric acid (DA) than that of nitrile butadiene rubber (NBR). It can be concluded that bimetallic Pd-Pt DSNs possess alloying and synergistic electronic effects on account of the hydrogenation degree (HD) of DA and NBR. Furthermore, the HD of DA and NBR shows a remarkable decrease with the incremental generations (n) of G _n M-(Pt₃/Pd₇) (n = 2, 3, 4, 5).