Plasmon-controlled fluorescence: a new paradigm in fluorescence spectroscopy

Construction of nanoparticle-on-mirror nanocavities and their applications in plasmon-enhanced spectroscopy

Plasmonic nanocavities exhibit exceptional capabilities in visualizing the internal structure of a single molecule at sub-nanometer resolution. Among these, an easily manufacturable nanoparticle-on-mirror (NPoM) nanocavity is a successful and powerful platform for demonstrating various optical phenomena. Exciting advances in surface-enhanced spectroscopy using NPoM nanocavities have been developed and explored, including enhanced Raman, fluorescence, phosphorescence, upconversion, etc. This perspective emphasizes the construction of NPoM nanocavities and their applications in achieving higher enhancement capabilities or spatial resolution in dark-field scattering spectroscopy and plasmon-enhanced spectroscopy. We describe a systematic framework that elucidates how to meet the requirements for studying light-matter interactions through the creation of well-designed NPoM nanocavities. Additionally, it provides an outlook on the challenges, future development directions, and practical applications in the field of plasmon-enhanced spectroscopy.

Synthesis of SiO2@Ag Nanocomposite for Investigating Metal-Enhanced Fluorescence and Surface-Enhanced Raman Spectroscopy

SiO2@Ag nanocomposite (NC) has been synthesized by the chemical reduction and Stӧber method for Metal-enhanced fluorescence (MEF) of Rhodmine 6G (R6G) and Surface-enhanced Raman spectroscopy (SERS) of Malachite green (MG). As-synthesized SiO2@Ag NC indicated SiO2 nanosphere (NS) and Ag nanoparticle (NP) morphologies. The SiO2@Ag NC was high quality with a well-defined crystallite phase with average sizes of 24 nm and 132 nm for Ag NP and SiO2 NC, respectively. By using SiO2@Ag NC, the photoluminescence (PL) intensity of the R6G (at 59.17 ppm) was increased approximately 133 times. The SERS of the MG (at 1.0 ppm) with SiO2@Ag NC as substrate clearly observed vibrational modes in MG dye at 798, 916, 1172, 1394, and 1616 cm-1. As a result, the SERS enhancement factor (EFSERS) at 1172 cm-1 obtained 6.3 × 106. This initial study points to the potential of SiO2@Ag NC as a promising material for MEF and SERS substrates to detect dyes at low concentrations.

Review of Gold Nanoparticles in Surface Plasmon-Coupled Emission Technology: Effect of Shape, Hollow Nanostructures, Nano-Assembly, Metal-Dielectric and Heterometallic Nanohybrids

Point-of-care (POC) diagnostic platforms are globally employed in modern smart technologies to detect events or changes in the analyte concentration and provide qualitative and quantitative information in biosensing. Surface plasmon-coupled emission (SPCE) technology has emerged as an effective POC diagnostic tool for developing robust biosensing frameworks. The simplicity, robustness and relevance of the technology has attracted researchers in physical, chemical and biological milieu on account of its unique attributes such as high specificity, sensitivity, low background noise, highly polarized, sharply directional, excellent spectral resolution capabilities. In the past decade, numerous nano-fabrication methods have been developed for augmenting the performance of the conventional SPCE technology. Among them the utility of plasmonic gold nanoparticles (AuNPs) has enabled the demonstration of plethora of reliable biosensing platforms. Here, we review the nano-engineering and biosensing applications of AuNPs based on the shape, hollow morphology, metal-dielectric, nano-assembly and heterometallic nanohybrids under optical as well as biosensing competencies. The current review emphasizes the recent past and evaluates the latest advancements in the field to comprehend the futuristic scope and perspectives of exploiting Au nano-antennas for plasmonic hotspot generation in SPCE technology.

Gold Polymer Nanomaterials: A Promising Approach for Enhanced Biomolecular Imaging

Gold nanoparticles (AuNPs) possess unique optical properties, making them highly attractive nanomaterials for biomedical research. By exploiting the diverse optical characteristics of various gold nanostructures, significant enhancements can be achieved in biosensing and biomedical imaging fields. The potential of AuNPs can be enhanced by creating hybrid nanocomposites with polymers, which offer supplementary functionalities, responsiveness, and enhanced biocompatibility. Moreover, polymers can modify the surface charges of AuNPs, thereby improving or controlling the efficiency of cellular uptake and the distribution of these nanoparticles within the body. Polymer modification using AuNPs offers a wide array of benefits, including improved sensitivity, specificity, speed, contrast, resolution, and penetration depth. By incorporating AuNPs into the polymer matrix, these enhancements synergistically enhance the overall performance of various applications. This versatile approach opens promising possibilities in fields such as biomedicine, nanotechnology, and sensor development, providing a powerful platform for advanced research and technological innovations. In this review, the recent advancements in polymer-AuNPs synthesis and their applications in bioimaging will be covered. Prospects and challenges associated with polymer-AuNPs-based bioimaging agents in preclinical and clinical investigations will be discussed.

Optimizing the Distance between Upconversion Thin Films and Silver Nanoprisms for the Design of a High-Performance Plasmonic Triplet-Triplet Annihilation Upconversion System

While the distance dependence of metal-enhanced fluorescence has been extensively studied for composite systems comprising fluorophores and metal nanoparticles, the corresponding distance dependence of triplet-triplet annihilation upconversion (TTA-UC) systems remains unexplored. Herein, we investigated the influence of the spatial distance between Ag nanoprisms (AgPRs) and TTA-UC thin films consisting of a palladium octaethylporphyrin (PdOEP) sensitizer and a 9,10-diphenylanthracene (DPA) emitter, aiming at enhancing the upconverted (UC) emission as efficiently as possible. Results indicated that the optimal distance for the examined system was significantly longer (12.6 nm) than those of typical metal-enhanced fluorescence systems (about 2 nm). We demonstrated that the UC emission enhancement factor can be expressed as a product including factors of the PdOEP photoexcitation rate, triplet-triplet energy transfer (TTET) efficiency from PdOEP to DPA, triplet excited DPA lifetime, and fluorescence efficiency of singlet excited DPA. We discovered that the AgPRs play a beneficial role in enhancing the PdOEP photoexcitation, whereas they exert detrimental effects on the other three factors. Among these three factors, quenching contributions by the decrease of the triplet excited DPA lifetime and DPA fluorescence efficiency were significant, making these the primary and secondary factors, respectively, for the UC emission quenching, particularly at short distances. These results demonstrate that the characteristic distance dependence of the UC emission enhancement is determined by the competing effects of beneficial PdOEP photoexcitation enhancement and the detrimental localized surface plasmon (and/or AgPR)-induced nonradiative decay of the triplet- and singlet excited DPA molecules. The findings offer valuable guidelines for the design of high-performance plasmonic TTA-UC systems.

Nanoscatterer-Assisted Fluorescence Amplification Technique

Weak fluorescence signals, which are important in research and applications, are often masked by the background. Different amplification techniques are actively investigated. Here, a broadband, geometry-independent and flexible feedback scheme based on the random scattering of dielectric nanoparticles allows the amplification of a fluorescence signal by partial trapping of the radiation within the sample volume. Amplification of up to a factor of 40 is experimentally demonstrated in ultrapure water with dispersed TiO2 nanoparticles (30 to 50 nm in diameter) and fluorescein dye at 200 μmol concentration (pumped with 5 ns long, 3 mJ laser pulses at 490 nm). The measurements show a measurable reduction in linewidth at the emission peak, indicating that feedback-induced stimulated emission contributes to the large gain observed.

Sol-gel synthesis of Eu3+ doped silica-gold nanorod composites with tunable optical properties

Gold nanorods (AuNRs) suspension at various concentrations was added into the sol-gel process to engineer nanostructured europium-doped silica host matrices as light-emitting composites. For this purpose, the samples were prepared following two different routes depending on the chemicals used as dopant and catalyst: (a) Eu(NO3)3·5H2O and HNO3, and (b) EuCl·6H2O and HCl. In any case, samples adding various concentrations of AuNRs suspension were prepared. The structural characterization of the samples was through STEM, backscattered electrons (BSE), and EDS analysis. Additionally, their optical properties were evaluated by PL spectroscopy and CIE colorimetry. The results confirmed that (a) methodology produced samples with AuNRs embedded and randomly distributed in the samples. However, these features were not observed in the samples obtained through (b) due to AuNRs dissolution in HCl media. Regarding the optical properties, the analysis of the relative intensity ratio 5D0 → 7F2/5D0 → 7F1 suggested that Eu3+ ions occupy non-centrosymmetric sites in (a) host matrices and centrosymmetric sites in (b). Hence, the increase of AuNRs suspension when fabricating (a) host matrices produced remarkable color changes in the luminescence of the samples towards the reddish-orange region. Meanwhile, the dissolution of AuNRs in (b) minimized the localized surface plasmon resonance (LSPR) effects on the Eu3+ luminescence. These findings revealed that the evaluation and selection of chemicals are critical factors when engineering these materials for more efficient coupling between the LSPR and Eu3+ luminescence.

Improved imaging and preservation of lysosome dynamics using silver nanoparticle-enhanced fluorescence

The dynamics of living cells can be studied by live-cell fluorescence microscopy. However, this requires the use of excessive light energy to obtain good signal-to-noise ratio, which can then photobleach fluorochromes, and more worrisomely, lead to phototoxicity. Upon light excitation, noble metal nanoparticles such as silver nanoparticles (AgNPs) generate plasmons, which can then amplify excitation in direct proximity of the nanoparticle's surface and couple to the oscillating dipole of nearby radiating fluorophores, modifying their rate of emission and thus, enhancing their fluorescence. Here, we show that AgNPs fed to cells to accumulate within lysosomes enhanced the fluorescence of lysosome-targeted Alexa488-conjugated dextran, BODIPY-cholesterol, and DQ-BSA. Moreover, AgNP increased the fluorescence of GFP fused to the cytosolic tail of LAMP1, showing that metal enhanced fluorescence can occur across the lysosomal membrane. The inclusion of AgNPs in lysosomes did not disturb lysosomal properties such as lysosomal pH, degradative capacity, autophagy and autophagic flux, and membrane integrity, though AgNP seemed to increase basal lysosome tubulation. Importantly, by using AgNP, we could track lysosome motility with reduced laser power without damaging and altering lysosome dynamics. Overall, AgNP-enhanced fluorescence may be a useful tool to study the dynamics of the endo-lysosomal pathway while minimizing phototoxicity.

Smartphone-Based Attomolar Cyanide Ion Sensing Using Au-Graphene Oxide Cryosoret Nanoassembly and Benzoxazolium-Based Fluorophore in a Surface Plasmon-Coupled Enhanced Fluorescence Interface

Photoplasmonic platforms are being demonstrated as excellent means for bridging nanochemistry and biosensing approaches at advanced interfaces, thereby augmenting the sensitivity and quantification of the desired analytes. Although resonantly coupled electromagnetic waves at the surface plasmon-coupled emission (SPCE) interface are investigated with myriad nanomaterials in order to boost the detection limits, rhodamine moieties are ubiquitously used as SPCE reporter molecules in spite of their well-known limitations. In order to overcome this constraint, in this work, a benzoxazolium-based fluorescent molecule, (E)-2-(4-(dimethylamino)styryl)-3-methylbenzo[d]oxazol-3-ium iodide (DSBO), was synthesized to selectively detect the cyanide (CN^-) ions in water samples. To this end, the sensitivity of the fabricated SPCE substrates is tested in spacer, cavity, and extended cavity nanointerfaces to rationalize the configurational robustness. The performance of the sensor is further improved with the careful engineering of gold (Au)-graphene oxide (GO) cryosoret nanoassemblies fabricated via an adiabatic cooling technology. The unique dequenching (turn-on) of the quenched (turn-off) fluorescent signal is demonstrated with the hybridized metal-π plasmon synergistic coupling in the nanovoids and nanocavities assisting delocalized Bragg and localized Mie plasmons. The spectro-plasmonic analysis yielded highly directional, polarized (>95%), and enhanced emission attributes with an attomolar limit of detection of 10 aM of CN^- ions with high linearity (R² = 0.996) and excellent reliability, in addition to an exceptional correlation with the theoretically obtained TFclac simulations. The CN^- ion sensing is experimentally validated with the smartphone-based cost-effective SPCE detection technology to render the device amenable to resource-limited settings. We believe that the unique fluorophore-cryosoret nanoassemblage presented here encourages development of frugal, unconventional, and highly desirable strategies for the selective quantitation of environmentally and physiologically relevant analytes at trace concentrations for use in point-of-care diagnostics.

Enhancement of Fluorescence Mediated by Silver Nanoparticles: Implications for Cell Imaging

In this study, we report the surface enhanced fluorescence (SEF) of a biologically important organic dye, fluorescein (FL), by silver nanoparticles (Ag NPs) in an aqueous medium and its implications for human cell imaging. The as-synthesized Ag NPs were characterized by dynamic light scattering (DLS), zeta potential, transmission electron microscopy (TEM), and UV-vis absorption spectroscopic studies. The interaction and aggregation of FL dye with Ag NPs and a cationic surfactant, namely, cetyltrimethylammonium bromide (CTAB), were explored by UV-vis absorption and steady-state and time-resolved fluorescence spectroscopic methods. The distance-dependent fluorescence enhancement of FL due to Ag NPs in the solution was also theoretically correlated by three-dimensional finite-difference time-domain (3D-FDTD) simulation. The plasmonic coupling between neighboring NPs facilitated the augmentation of the local electric field, thereby producing various "hotspots" that influence the overall fluorescence of the emitter. J-type aggregates of FL in the presence of the CTAB micelles and Ag NP mixed solution were confirmed by electronic spectroscopy. The density functional theoretical (DFT) study revealed the electronic energy levels associated with different forms of FL dye in the aqueous solution. Most interestingly, the Ag NP/FL mixed system used in fluorescence imaging of human lung fibroblast cells (WI 38 cell line) showed a significantly stronger green fluorescence signal compared to that of FL after an incubation period of only 3 h. This study confirms that the Ag NP mediated SEF phenomenon of the FL dye is also manifested in the intracellular medium of human cells giving a brighter and more intense fluorescence image. The cell viability test after exposure to the Ag NP/FL mixed system was confirmed by the MTT assay method. The proposed study may have an implication as an alternate approach for human cell imaging with higher resolution and more contrast.

Luminescent Guests Encapsulated in Metal-Organic Frameworks for Portable Fluorescence Sensor and Visual Detection Applications: A Review

Metal-organic frameworks (MOFs) have excellent applicability in several fields and have significant structural advantages, due to their open pore structure, high porosity, large specific surface area, and easily modifiable and functionalized porous surface. In addition, a variety of luminescent guest (LG) species can be encapsulated in the pores of MOFs, giving MOFs a broader luminescent capability. The applications of a variety of LG@MOF sensors, constructed by doping MOFs with LGs such as lanthanide ions, carbon quantum dots, luminescent complexes, organic dyes, and metal nanoclusters, for fluorescence detection of various target analyses such as ions, biomarkers, pesticides, and preservatives are systematically introduced in this review. The development of these sensors for portable visual fluorescence sensing applications is then covered. Finally, the challenges that these sectors currently face, as well as the potential for future growth, are briefly discussed.

Photonic Crystal Enhanced Fluorescence: A Review on Design Strategies and Applications

Nanoscale fluorescence emitters are efficient for measuring biomolecular interactions, but their utility for applications requiring single-unit observations is constrained by the need for large numerical aperture objectives, fluorescence intermittency, and poor photon collection efficiency resulting from omnidirectional emission. Photonic crystal (PC) structures hold promise to address the aforementioned challenges in fluorescence enhancement. In this review, we provide a broad overview of PCs by explaining their structures, design strategies, fabrication techniques, and sensing principles. Furthermore, we discuss recent applications of PC-enhanced fluorescence-based biosensors incorporated with emerging technologies, including nucleic acids sensing, protein detection, and steroid monitoring. Finally, we discuss current challenges associated with PC-enhanced fluorescence and provide an outlook for fluorescence enhancement with photonic-plasmonics coupling and their promise for point-of-care biosensing as well monitoring analytes of biological and environmental relevance. The review presents the transdisciplinary applications of PCs in the broad arena of fluorescence spectroscopy with broad applications in photo-plasmonics, life science research, materials chemistry, cancer diagnostics, and internet of things.

Wavelength-Dependent Metal-Enhanced Fluorescence Biosensors via Resonance Energy Transfer Modulation

Fluorescence can be enhanced or quenched depending on the distance between the surface of a metal nanoparticle and the fluorophore molecule. Fluorescence enhancement by nearby metal particles is called metal-enhanced fluorescence (MEF). MEF shows promising potential in the field of fluorescence-based biological sensing. MEF-based biosensor systems generally fall into two platform categories: (1) a two/three-dimensional scaffold, or (2) a colloidal suspension. This review briefly summarizes the application studies using wavelength-dependent carbon dots (UV-VIS), noble metals (VIS), and upconversion nanoparticles (NIR to VIS), representative nanomaterials that contribute to the enhancement of fluorescence through the resonance energy transfer modulation and then presents a perspective on this topic.

Biosensing Technologies: A Focus Review on Recent Advancements in Surface Plasmon Coupled Emission

In the past decade, novel nano-engineering protocols have been actively synergized with fluorescence spectroscopic techniques to yield higher intensity from radiating dipoles, through the process termed plasmon-enhanced fluorescence (PEF). Consequently, the limit of detection of analytes of interest has been dramatically improvised on account of higher sensitivity rendered by augmented fluorescence signals. Recently, metallic thin films sustaining surface plasmon polaritons (SPPs) have been creatively hybridized with such PEF platforms to realize a substantial upsurge in the global collection efficiency in a judicious technology termed surface plasmon-coupled emission (SPCE). While the process parameters and conditions to realize optimum coupling efficiency between the radiating dipoles and the plasmon polaritons in SPCE framework have been extensively discussed, the utility of disruptive nano-engineering over the SPCE platform and analogous interfaces such as 'ferroplasmon-on-mirror (FPoM)' as well as an alternative technology termed 'photonic crystal-coupled emission (PCCE)' have been seldom reviewed. In light of these observations, in this focus review, the myriad nano-engineering protocols developed over the SPCE, FPoM and PCCE platform are succinctly captured, presenting an emphasis on the recently developed cryosoret nano-assembly technology for photo-plasmonic hotspot generation (first to fourth). These technologies and associated sensing platforms are expected to ameliorate the current biosensing modalities with better understanding of the biophysicochemical processes and related outcomes at advanced micro-nano-interfaces. This review is hence envisaged to present a broad overview of the latest developments in SPCE substrate design and development for interdisciplinary applications that are of relevance in environmental as well as biological heath monitoring.

Macroscopic quantum electrodynamics approach to multichromophoric excitation energy transfer. II. Polariton-mediated population dynamics in a dimer system

In this study, based on the theory developed in Paper I, we explore the combined effects of molecular fluorescence and excitation energy transfer in a minimal model-a pair of single-vibration-mode chromophores coupled to surface plasmon polaritons. For the chromophores with zero Huang-Rhys factors and strong couplings to surface plasmon polaritons, we find that the frequencies of Rabi oscillations (the strengths of strong light-matter couplings) are associated with the initial excitation conditions. On the other hand, for the chromophores weakly coupled to surface plasmon polaritons, our numerical calculations together with analytical analysis elaborate on the conditions for the superradiant and subradiant decay behaviors. Moreover, we show that the modified decay rate constants can be explicitly expressed in terms of generalized spectral densities (or dyadic Green's functions), revealing a relationship between photonic environments and the collective effects such as superradiance and subradiance. For the chromophores with nonzero Huang-Rhys factors and strong coupling to surface plasmon polaritons, the effects of molecular vibrations emerge. We demonstrate that the low-frequency vibrational modes do not affect the excited state population dynamics, while the high-frequency vibrational modes can modify either the period of Rabi oscillation (Franck-Condon Rabi oscillation) or the amplitude of excited state population. Our study shows that the collective effects, including superradiance and subradiance, can be controlled via dielectric environments and initial excitation conditions, providing new insights into polariton chemistry and the design of quantum optical devices.

Optical and topographic characteristics of silver films deposited from a colloidal solution on polyelectrolytes for IgG-FITC fluorescence analysis

The optimization of the fluorescence enhancement factor of the IgG-FITC conjugate as an immunofluorescent marker, depending on the optical and topographic parameters of the colloidal silver film on the surface of a polystyrene plate for immunoassay, was carried out for the first time, and the factors effecting the enhancement were identified. By means of time-resolved spectroscopy as well as by detection the relative concentrations of IgG-FITC adsorbed on the solid phase with enzyme-linked immunoassay, it was shown that fluorescence enhancement in the presence of silver nanoparticles is a resonance process associated with plasmon effects. The most important parameters correlating with the fluorescence enhancement factor are the optical density value at the wavelength of excitation and emission of the fluorophore. The maximum enhancement factor of 10.2 times was obtained for Ag films with the highest optical density.

Sericin-Based Bio-Inspired Nano-Engineering of Heterometallic AgAu Nanocubes for Attomolar Mefenamic Acid Sensing in the Mobile Phone-Based Surface Plasmon-Coupled Interface

Engineering photo-plasmonic platforms with heterometallic nanohybrids are of paramount significance for realizing augmented sensitivity in fluorescence-based analytical detection. Although myriad nanomaterials with versatile functionalities have been explored in this regard in the surface plasmon-coupled emission (SPCE) interface, light harvesting using nano-antennas synthesized via sustainable bio-inspired routes still remains a high priority in current research. Our study provides a rational design for in situ fabrication of nanoparticles of silver, gold, and their plasmonic hybrids using biocompatible, non-hazardous sericin protein (obtained Bombyx mori) as the reducing and capping agent. The one-pot, user-eco-friendly technology demonstrated here utilizes UV irradiation to promote the photo-induced electron transfer mechanism, thereby yielding nanomaterials of tunable optoelectronic functionalities. The resulting homometallic and heterometallic nanohybrids with robust localized surface plasmon resonances (LSPR) showed strong light-confining attributes when interfaced with the propagating surface plasmon polaritons (SPPs) of the SPCE platform, thereby yielding tunable, highly directional, polarized, and amplified fluorescence emission. The experimentally obtained emission profiles displayed an excellent correlation with the theoretically obtained dispersion diagrams validating the spectro-plasmonic results. The abundant hotspots from AgAu nanocubes presented in excess of 1300-fold dequenched fluorescence enhancement and were utilized for cost-effective and real-time mobile phone-based sensing of biologically relevant mefenamic acid at an attomolar limit of detection. We believe that this superior biosensing performance accomplished using the frugal bioinspired nano-engineering at hybrid interfaces would open new doors for developing nanofabrication protocols with the quintessential awareness of the principles of green nanotechnology, consequently eliminating hazardous chemicals and solvents in the development of point-of-care diagnostic tools.

Recent Advances in Silver Nanostructured Substrates for Plasmonic Sensors

Noble metal nanostructures are known to confine photon energies to their dimensions with resonant oscillations of their conduction electrons, leading to the ultrahigh enhancement of electromagnetic fields in numerous spectroscopic methods. Of all the possible plasmonic nanomaterials, silver offers the most intriguing properties, such as best field enhancements and tunable resonances in visible-to-near infrared regions. This review highlights the recent developments in silver nanostructured substrates for plasmonic sensing with the main emphasis on surface plasmon resonance (SPR) and surface-enhanced Raman spectroscopy (SERS) over the past decade. The main focus is on the synthesis of silver nanostructured substrates via physical vapor deposition and chemical synthesis routes and their applications in each sensing regime. A comprehensive review of recent literature on various possible silver nanostructures prepared through these methodologies is discussed and critically reviewed for various planar and optical fiber-based substrates.

Chemical Sensor Nanotechnology in Pharmaceutical Drug Research

The increase in demand for pharmaceutical treatments due to pandemic-related illnesses has created a need for improved quality control in drug manufacturing. Understanding the physical, biological, and chemical properties of APIs is an important area of health-related research. As such, research into enhanced chemical sensing and analysis of pharmaceutical ingredients (APIs) for drug development, delivery and monitoring has become immensely popular in the nanotechnology space. Nanomaterial-based chemical sensors have been used to detect and analyze APIs related to the treatment of various illnesses pre and post administration. Furthermore, electrical and optical techniques are often coupled with nano-chemical sensors to produce data for various applications which relate to the efficiencies of the APIs. In this review, we focus on the latest nanotechnology applied to probing the chemical and biochemical properties of pharmaceutical drugs, placing specific interest on several types of nanomaterial-based chemical sensors, their characteristics, detection methods, and applications. This study offers insight into the progress in drug development and monitoring research for designing improved quality control methods for pharmaceutical and health-related research.

Metal-Enhanced Hg2+-Responsive Fluorescent Nanoprobes: From Morphological Design to Application to Natural Waters

Metal-enhanced fluorescence (MEF) is a powerful tool in the design of sensitive chemical sensors by improving brightness and photostability of target-responsive fluorophores. Compounding these advantages with the modest hardware requirements of fluorescence sensing compared to that of centralized elemental analysis instruments, thus expanding the use of MEF to the detection of low-level inorganic pollutants, is a compelling aspiration. Among the latter, monitoring mercury in the environment, where some of its species disseminate through the food chain and, in time, to humans, has elicited a broad research effort toward the development of Hg²⁺-responsive fluorescent sensors. Herein, a Hg²⁺-sensitive MEF-enabled probe was conceived by grafting a Hg²⁺-responsive fluorescein derivative to concentric Ag@SiO₂ NPs, where the metallic core enhances fluorescence emission of molecular probes embedded in a surrounding silica shell. Time-resolved fluorescence measurements showed that the fluorophore's excited-state lifetime decreases from 3.9 ns in a solid, coreless silica sphere to 0.4 ns in the core-shell nanoprobe, granting the dye a better resistance to photobleaching. The Ag-core system showed a sizable improvement in the limit of detection at 2 nM (0.4 ppb) compared to 50 nM (10 ppb) in silica-only colloids, and its effectiveness for natural water analysis was demonstrated. Overall, the reported nanoarchitecture hints at the potential of MEF for heavy metal detection by fluorescence detection.

Metal-enhanced fluorescence of dyes with quadrupole surface plasmon resonance of silver nanoparticles

Silver colloidal films (SCFs) composed of homogeneous 60-220 nm silver nanoparticles were synthesized for optimal fluorescence enhancement of chromophores with the dipole and quadrupole surface plasmons. The fluorescence enhancements with the SCFs of three chromophores, 4-(dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran, 4-dimethylamino-4'-nitrobiphenyl, and coumarin 343 whose emission spectra are centered distinctively in the 470-560 nm wavelength range were compared. Fluorescence enhancements and lifetime changes were investigated via time-resolved fluorescence spectroscopy. The spectral overlap between the chromophore's emission and the dipole or quadrupole surface plasmon resonance (SPR) bands determined the fluorescence enhancements with the SCFs. The dipole and quadrupole SPR bands both appeared to provide effective fluorescence enhancements of chromophores. This knowledge allows researchers to develop sensitive fluorescence sensors by combining nanoparticles with optimal dipole or quadrupole SPR bands in order to achieve fluorescence enhancement of a specific chromophore. The emission dynamics measurements with the SCFs were combined with the finite-difference time-domain simulation results for the local electric fields around the silver nanoparticles to enable discussion of metal-enhanced fluorescence mechanisms, including excitation and emission enhancements.

Electrochemical Synthesis of Plasmonic Nanostructures

Thanks to their tunable and strong interaction with light, plasmonic nanostructures have been investigated for a wide range of applications. In most cases, controlling the electric field enhancement at the metal surface is crucial. This can be achieved by controlling the metal nanostructure size, shape, and location in three dimensions, which is synthetically challenging. Electrochemical methods can provide a reliable, simple, and cost-effective approach to nanostructure metals with a high degree of geometrical freedom. Herein, we review the use of electrochemistry to synthesize metal nanostructures in the context of plasmonics. Both template-free and templated electrochemical syntheses are presented, along with their strengths and limitations. While template-free techniques can be used for the mass production of low-cost but efficient plasmonic substrates, templated approaches offer an unprecedented synthetic control. Thus, a special emphasis is given to templated electrochemical lithographies, which can be used to synthesize complex metal architectures with defined dimensions and compositions in one, two and three dimensions. These techniques provide a spatial resolution down to the sub-10 nanometer range and are particularly successful at synthesizing well-defined metal nanoscale gaps that provide very large electric field enhancements, which are relevant for both fundamental and applied research in plasmonics.

Monosaccharide-mediated rational synthesis of a universal plasmonic platform with broad spectral fluorescence enhancement for high-sensitivity cancer biomarker analysis

Background

Effective and accurate screening of oncological biomarkers in peripheral blood circulation plays an increasingly vital role in diagnosis and prognosis. High-sensitivity assays can effectively aid clinical decision-making and intervene in cancer in a localized status before they metastasize and become unmanageable. Meanwhile, it is equally pivotal to prevent overdiagnosis of non-life-threatening cancer by eliminating unnecessary treatment and repeated blood draws. Unfortunately, current clinical screening methodologies can hardly simultaneously attain sufficient sensitivity and specificity, especially under resource-restrained circumstances. To circumvent such limitations, particularly for cancer biomarkers from early-onset and recurrence, we aim to develop a universal plasmonic platform for clinical applications, which macroscopically amplifies multiplexed fluorescence signals in a broad spectral window and readily adapts to current assay setups without sophisticated accessories or expertise at low cost.

Methods

The plasmonic substrate was chemically synthesized in situ at the solid–liquid interface by rationally screening a panel of reducing monosaccharides and tuning the redox reactions at various catalyst densities and precursor concentrations. The redox properties were studied by Benedict’s assay and electrochemistry. We systemically characterized the morphologies and optical properties of the engineered plasmonic Ag structures by scanning electron microscopy (SEM) and spectroscopy. The structure-fluorescence enhancement correlation was explicitly explained by the finite-difference time-domain (FDTD) simulation and a computational model for gap distribution. Next, we established an enhanced fluoroimmunoassay (eFIA) using a model biomarker for prostate cancer (PCa) and validated it in healthy and PCa cohorts. Prognosis was explored in patients subject to surgical and hormonal interventions following recommended PCa guidelines.

Results

The monosaccharide-mediated redox reaction yielded a broad category of Ag structures, including sparsely dispersed nanoparticles (NPs) of various sizes, semi-continuous nanoislands, and crackless continuous films. Optimal broad-spectral fluorescence enhancement from green to far-red was observed for the inhomogeneous, irregularly-shaped semi-continuous Ag nanoisland substrate (AgNIS), synthesized from a well-balanced redox reaction at a stable rate mediated by mannose. In addition, different local electric field intensity distributions in response to various incident excitations were observed at the nanoscale, elucidating the need for irregular and inhomogeneous structures. AgNIS enabled a maximized 54.7-fold macroscopically amplified fluorescence and long-lasting photostability. Point-of-care availability was fulfilled using a customized smartphone prototype with well-paired optics. The eFIA effectively detected the PCa marker in cell lines, xenograft tumors, and patient sera. The plasmonic platform rendered a diagnostic sensitivity of 86.0% and a specificity of 94.7% and capably staged high-grade PCa that the clinical gold standard test failed to stratify. Patient prognosis of robotic-assisted surgeries and hormone therapies was non-invasively monitored following efficient medical interventions. The assay time was significantly curtailed on the plasmonic platform upon microwave irradiation.

Conclusions

By investigating the effects of reducing monosaccharides on the seed-mediated chemical synthesis of plasmonic Ag structures, we deduced that potent multiplexed fluorescence enhancement originated from both an adequate reducing power and a steady reduction rate. Furthermore, the inhomogeneous structure with adequate medium gap distances afforded optimal multiwavelength fluorescence enhancement, thus empowering an effective eFIA for PCa. The clinically validated diagnostic and prognostic features, along with the low sample volume, point-of-care feasibility with a smartphone, and microwave-shortened assay time, warrant its potential clinical translation for widespread cancer biomarker analysis.

Graphical Abstract

Photonics of Viburnum opulus L. Extracts in Microemulsions with Oxygen and Gold Nanoparticles

In this paper, the optical properties of viburnum extract flavonoids in the visible region of the spectrum were investigated and their use as a potential photosensitizer of singlet oxygen for photodynamic therapy was evaluated. The presence of long-lived excited states in the extract molecules was established by spectral methods and time-resolved spectroscopy methods and the dependences of the absorption capacity and luminescence intensity of the extract molecules on the concentrations of oxygen and ablative nanoparticles of the gold in the reverse micelles of AOT (sodium dioctyl sulfosuccinate) were established. The plasmonic enhancement of the luminescence of the extract molecules and the processes of their complexation with oxygen were also established. Furthermore, the rate constants of the processes of conversion of exciting energy in complexes were determined.

Combined Effects of Emitter-Emitter and Emitter-Plasmonic Surface Separations Dictate Photoluminescence Enhancement in Plasmonic Field

The brightness of an emitter can be enhanced by metal-enhanced fluorescence, wherein the excitonic dipole couples with the electromagnetic field of the surface plasmon. Herein, we experimentally map the landscape...

Plasmon-Enhanced Fluorescence in Electrospun Nanofibers of Polydiacetylenes Infused with Silver Nanoparticles

A hybrid computational and experimental approach was employed toward the rational design of a silver nanoparticle (AgNP)/polydiacetylene (PDA) metal-enhanced fluorophore (MEF) ensemble system contained within a poly(ethylene oxide) (PEO) electrospun nanofiber matrix for creation of high-performance sensors. Simulations based on Mie theory and finite-difference time domain (FDTD) algorithms were performed to understand and optimize spectral overlap between the AgNP localized surface plasmon resonance and the absorbance and emission spectra of PDA, a supramolecular polymer fluorophore. A series of AgNPs of varied sizes were investigated for fluorescence enhancement capability, and an optimal size of 134 nm in diameter was chosen for synthesis and incorporation into the electrospun nanofibers of a PDA/PEO composite for experimental characterization and confirmation. Results on individual nanofibers indicated a clear metal-enhanced fluorescence effect, and a 4.6-fold enhancement over neat PDA/PEO fluorescent nanofibers was observed. The nanofiber/nanoparticle/MEF ensemble system offers new avenues for generating effective sensing devices with polymeric fluorophores using a straightforward incorporation approach.

Role of metal-nanostructure features on tip-enhanced photoluminescence of single molecules

Tip-enhanced photoluminescence (TEPL) experiments have recently reached the ability to investigate single molecules exploiting resolution at the submolecular level. Localized surface plasmon resonances of metallic nanostructures have the capability of enhancing an impinging electromagnetic radiation in the proximity of their surface, with evident consequences both on absorption and emission of molecules placed in the same region. We propose a theoretical analysis of these phenomena in order to interpret TEPL experiments on single molecules, including a quantum mechanical description of the target molecule equilibrated with the presence of two nanostructures representative of the nanocavity usually employed in STMs. The approach has been applied to the zinc phthalocyanine molecule, previously considered in recent TEPL experiments [Yang et al., Nat. Photonics 14, 693-699 (2020)]. This work has the aim of providing a comprehensive theoretical understanding of the experimental results, particularly focusing on the investigation of the tip features that majorly influence the excitation and fluorescence processes of the molecule, such as the geometry, the dielectric function, and the tip-molecule distance.

Plasmonic Core-Shell Nanomaterials and their Applications in Spectroscopies

Plasmonic core-shell nanostructures have attracted considerable attention in the scientific community recently due to their highly tunable optical properties. Plasmon-enhanced spectroscopies are one of the main applications of plasmonic nanomaterials. When excited by an incident laser of suitable wavelength, strong and highly localized electromagnetic (EM) fields are generated around plasmonic nanomaterials, which can significantly boost excitation and/or radiation processes that amplify Raman, fluorescence, or nonlinear signals and improve spectroscopic sensitivity. Herein, recent developments in plasmon-enhanced spectroscopies utilizing core-shell nanostructures are reviewed, including shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS), plasmon-enhanced fluorescence spectroscopy, and plasmon-enhanced nonlinear spectroscopy.

Gold Nanoparticle-based "Mix and Measure" Fluorimetric Assays to Quantify Antibody Titer

Monoclonal antibodies (mAbs) for treatment of human diseases are typically human or humanized Immunoglobulin G (IgG) produced in mammalian cell lines. A rapid, less tedious, and high throughput method to quantify mAbs is in demand to accelerate mAb production efficiency. To quantify mAb titer, we developed gold nanoparticle (AuNPs)-based "mix and measure" fluorimetric assays by exploiting AuNPs' fluorescence quenching ability. The AuNPs are functionalized by an Fc binding protein, i. e. protein G, which binds human IgG and fluorescently labeled rat IgG (Alexa Fluor 488-rat IgG) with differential affinity. The assays can be in competition or displacement format. The competitive binding of human IgG drug and the labelled rat IgG to protein G-coated AuNP lead to varied fluorescent intensity that is proportional to the amount of human IgG analte; or the displacement of the labelled rat IgG from protein G-coated AuNP by human IgG can lead to fluorescent recovery that is also proportionally related to human IgG concentration. The assays can quantify therapeutic mAbs in the range of 10-1,000 mg/L, demonstrated for Herceptin, Avastin, and Humira in cell culture media. The assays have fast turn over time (within 15 min). They can be performed in microplates and are suitable for high throughput "on-line" or "at-line" measurement in mAbs production lines.

Performance Improvement of Triplet-Triplet Annihilation-Based Upconversion Solid Films through Plasmon-Induced Backward Scattering of Periodic Arrays of Ag and Al

The performance improvement of solid-state triplet-triplet annihilation-based photon upconversion (TTA-UC) systems is required for the application to various solar devices. The performance can be improved by making use of the local strong electric field generated through the excitation of localized surface plasmon (LSP) resonance of metal nanostructures. However, since the improvement is effective only within the limited nanospace around nanoparticles (i.e., the near-field effect), a methodology for improving the performance over a wider spatial region is desirable. In this study, a significant improvement in the threshold light excitation intensity (I_th) (77% decrease) as the figure of merit and the upconverted emission intensity (6.3 times enhancement) in a solid-state TTA-UC film with a thickness of 3 μm was achieved by stacking the film with periodic Ag half-shell arrays. The highest-enhanced upconverted emission was obtained by tuning the diffuse reflectance peak, which results from the excitation of LSP resonance of the Ag half-shell arrays, to overlap well with the photoexcitation peak of the sensitizer in the TTA-UC film. The intensity of the enhanced upconverted emission was independent of the distance between the lower edge of the TTA-UC film and the surface of half-shell arrays in the nanometer order. These results suggest that the performance improvement was attributed to the photoexcitation enhancement of the sensitizer by elongating the excitation light path length inside the TTA-UC film, which was achieved through a strong backward scattering of the incident light based on the LSP resonance excitation (i.e., the far-field effect). In addition, the upconverted emission was improved using half-shell arrays comprising low-cost Al, although the enhancement factor was 3.5, which was lower than that of Ag half-shell arrays. The lower enhancement may be attributed to a decrease in the backward scattering of the excitation light owing to the intrinsic strong interband transition of Al at long visible wavelengths.

Active magnetic dipole emission by the Ge2Sb2Te5 nanodisk

Active light manipulation plays a critical role in nanophotonics. In this Letter, we investigate the modulation properties of magnetic dipole (MD) emission based on the phase change material Ge₂Sb₂Te₅ hollow nanodisk (GST-HND). The results show that the amorphous GST-HND supports a strong MD response with a radiative decay enhancement of 282 times and quantum efficiency of 100%. More importantly, by tuning the crystallization rate of GST, the active manipulation of MD radiation is achieved with a quantum efficiency modulation depth of up to 95% at a specific wavelength. Our work may provide significant instruction for the active tuning of optical nanodevices.

Enhancing Singlet Oxygen Photocatalysis with Plasmonic Nanoparticles

Photocatalysts able to trigger the production of singlet oxygen species are the topic of intense research efforts in organic synthesis. Yet, challenges still exist in improving their activity and optimizing their use. Herein, we exploited the benefits of plasmonic nanoparticles to boost the activity of such photocatalysts via an antenna effect in the visible range. We synthesized silica-coated silver nanoparticles (Ag@SiO₂ NPs), with silica shells which thicknesses ranged from 7 to 45 nm. We showed that they served as plasmonically active supports for tris(bipyridine)ruthenium(II), [Ru(bpy)₃]²⁺, and demonstrated an enhanced catalytic activity under white light-emitting diode (LED) irradiation for citronellol oxidation, a key step in the commercial production of rose oxide fragrance. A maximum enhancement of the plasmon-mediated reactivity of approximately 3-fold was observed with a 28 nm silica layer along with a 4-fold enhancement in the emission intensity of the photocatalyst. Using electron energy loss spectroscopy (EELS) and boundary element method simulations, we mapped the decay of the plasmonic signal around the Ag core and provided a rationale for the observed catalytic enhancement. This work provides a systematic analysis of the promising properties of plasmonic NPs used as catalysis-enhancing supports for common homogeneous photocatalysts and a framework for the successful design of such systems in the context of organic transformations.

Extraordinary Fluorescence Enhancement in Metal-Dielectric Core-Shell Nanoparticles

We show that in metal-dielectric core-shell nanoparticles, unusually thick dielectric coatings can produce extreme fluorescence enhancement with an enhancement factor F̅ ≳ 3000 for emitters located on the surface or in the interior of the shell of Au@dielectric spherical particles under realistic conditions, even for the emitters with 100% intrinsic quantum yield. Thick dielectric coatings facilitate high-quality transverse electric (TE) multipole (l = 7) resonances which are shown as the major cause for the reported extraordinary values of F̅.

Surface Plasmon-Assisted Fluorescence Enhancing and Quenching: From Theory to Application

The integration of surface plasmon resonance and fluorescence yields a multiaspect improvement in surface fluorescence sensing and imaging, leading to a paradigm shift of surface plasmon-assisted fluorescence techniques, for example, surface plasmon enhanced field fluorescence spectroscopy, surface plasmon coupled emission (SPCE), and SPCE imaging. This Review aims to characterize the unique optical property with a common physical interpretation and diverse surface architecture-based measurements. The fundamental electromagnetic theory is employed to comprehensively unveil the fluorophore-surface plasmon interaction, and the associated surface-modification design is liberally highlighted to balance the surface plasmon-induced fluorescence-enhancement efforts and the surface plasmon-caused fluorescence-quenching effects. In particular, all types of surface structures, for example, silicon, carbon, protein, DNA, polymer, and multilayer, are systematically interrogated in terms of component, thickness, stiffness, and functionality. As a highly interdisciplinary and expanding field in physics, optics, chemistry, and surface chemistry, this Review could be of great interest to a broad readership, in particular, among physical chemists, analytical chemists, and in surface-based sensing and imaging studies.

Highly sensitive wide-range target fluorescence biosensors of high-emittance metasurfaces

We demonstrate highly sensitive fluorescence (FL) biosensors made of plasmon-photon-hybrid high-emittance metasurfaces, which are hybrid structures composed of perforated silicon waveguides and stacked complementary (SC) gold nanostructures. The SC metasurfaces are applicable to a wide range of targets from antibodies to nucleic acids. As a test bed, a representative antibody of immunoglobulin G is immobilized on the metasurfaces through microfluidic paths and then is directly detected in a scaled manner even at a very low concentration of 5 pg mL^-1, i.e., 34 fM. Moreover, a cancer marker of p53 antibody is indirectly detected on the SC metasurfaces at a low concentration of 50 pg mL^-1, which is significantly lower than the medical diagnosis criterion of a few ng mL^-1. Furthermore, single-strand DNAs that are oligonucleotides and complementary to SARS-CoV-2 RNA are detected with 1 h immobilization time in the range of fmol mL^-1 in a scaled manner. These experimental results indicate that the present FL metasurface sensors function efficiently as biosensors for a wide range of biomarkers.

Recent progress in sensing application of metal nanoarchitecture-enhanced fluorescence

Fluorescence analytical methods, as real time and in situ analytical approaches to target analytes, can offer advantages of high sensitivity/selectivity, great versatility, non-invasive measurement and easy transmission over long distances. However, the conventional fluorescence assay still suffers from low specificity, insufficient sensitivity, poor reliability and false-positive responses. By exploiting various metal nanoarchitectures to manipulate fluorescence, both increased fluorescence quantum yield and improved photostability can be realized. This metal nanoarchitecture-enhanced fluorescence (MEF) phenomenon has been extensively studied and used in various sensors over the past years, which greatly improved their sensing performance. Thus in this review, we primarily give a general overview of MEF based sensors from mechanisms to state-of-the-art applications in environmental assays, biological/medical analysis and diagnosis areas. Finally, their pros and cons as well as further development directions are also discussed.

DNA-Engineerable Ultraflat-Faceted Core-Shell Nanocuboids with Strong, Quantitative Plasmon-Enhanced Fluorescence Signals for Sensitive, Reliable MicroRNA Detection

There has been enormous interest in understanding and utilizing plasmon-enhanced fluorescence (PEF) with metal nanostructures, but maximizing the enhancement in a reproducible, quantitative manner while reliably controlling the distance between dyes and metal particle surface for practical applications is highly challenging. Here, we designed and synthesized fluorescence-amplified nanocuboids (FANCs) with highly enhanced and controlled PEF signals, and fluorescent silica shell-coated FANCs (FS-FANCs) were then formed to fixate the dye position and increase particle stability and fluorescence signal intensity for biosensing applications. By uniformly modifying fluorescently labeled DNA on Au nanorods and forming ultraflat Ag shells on them, we were able to reliably control the distance between fluorophores and Ag surface and obtained an ∼186 fluorescence enhancement factor with these FANCs. Importantly, FS-FANCs were utilized as fluorescent nanoparticle tags for microarray-based miRNA detection, and we achieved >10³-fold higher sensitivity than commercially available chemical fluorophores with 100 aM to 1 pM dynamic range.

Amplified Fluorescence by Hollow-Porous Plasmonic Assembly: A New Observation and Its Application in Multiwavelength Simultaneous Detection

Surface plasmon coupled emission (SPCE) is a new analytical technique that provides increased and directional radiation based on the near-field interaction between fluorophores and surface plasmons but suffers from the limitation of insufficient sensitivity. The assembly of hollow-porous plasmonic nanoparticles could be the qualified candidate. After the introduction of gold nanocages (AuNCs), fluorescence signal enhancement was realized by factors over 150 and 600 compared with the normal SPCE and free space emission, respectively, with a fluorophore layer thickness of approximately 10 nm; hence, the unique enhancement of SPCE by the AuNCs effectively overcomes the signal quenching induced by resonance energy transfer (in normal SPCE). This enhancement was proven to be triggered by the superior wavelength match, the enhanced electromagnetic field, and new radiation channel and process induced by the AuNC assembly, which provides an opportunity to increase the detection sensitivity and establish an optimal plasmonic enhancement system. The amplified SPCE system was employed for multiwavelength simultaneous enhancement detection through the assembly of mixed hollow nanoparticles (AuNCs and gold nanoshells), which could broaden the application of SPCE in simultaneous sensing and imaging for multianalytes.

Fluorescence activation, patterning and enhancement with photogenerated radicals, a prefluorescent probe and silver nanostructures

We designed a switchable fluorophore activated by UVA light and a radical initiator, for optical lithography with concomitant metal-enhanced fluorescence by silver nanoparticles.

Plasmon-Enhanced Fluorescence of EGFP on Short-Range Ordered Ag Nanohole Arrays

Fluorescence of organic molecules can be enhanced by plasmonic nanostructures through coupling to their locally amplified electromagnetic field, resulting in higher brightness and better photostability of fluorophores, which is particularly important for bioimaging applications involving fluorescent proteins as genetically encoded biomarkers. Here, we show that a hybrid bionanosystem comprised of a monolayer of Enhanced Green Fluorescent Protein (EGFP) covalently linked to optically thin Ag films with short-range ordered nanohole arrays can exhibit up to 6-fold increased brightness. The largest enhancement factor is observed for nanohole arrays with a propagating surface plasmon mode, tuned to overlap with both excitation and emission of EGFP. The fluorescence lifetime measurements in combination with FDTD simulations provide in-depth insight into the origin of the fluorescence enhancement, showing that the effect is due to the local amplification of the optical field near the edges of the nanoholes. Our results pave the way to improving the photophysical properties of hybrid bionanosystems based on fluorescent proteins at the interface with easily fabricated and tunable plasmonic nanostructures.

Ultrasensitive antibody-aptamer plasmonic biosensor for malaria biomarker detection in whole blood

Development of plasmonic biosensors combining reliability and ease of use is still a challenge. Gold nanoparticle arrays made by block copolymer micelle nanolithography (BCMN) stand out for their scalability, cost-effectiveness and tunable plasmonic properties, making them ideal substrates for fluorescence enhancement. Here, we describe a plasmon-enhanced fluorescence immunosensor for the specific and ultrasensitive detection of Plasmodium falciparum lactate dehydrogenase (PfLDH)—a malaria marker—in whole blood. Analyte recognition is realized by oriented antibodies immobilized in a close-packed configuration via the photochemical immobilization technique (PIT), with a top bioreceptor of nucleic acid aptamers recognizing a different surface of PfLDH in a sandwich conformation. The combination of BCMN and PIT enabled maximum control over the nanoparticle size and lattice constant as well as the distance of the fluorophore from the sensing surface. The device achieved a limit of detection smaller than 1 pg/mL (<30 fM) with very high specificity without any sample pretreatment. This limit of detection is several orders of magnitude lower than that found in malaria rapid diagnostic tests or even commercial ELISA kits. Thanks to its overall dimensions, ease of use and high-throughput analysis, the device can be used as a substrate in automated multi-well plate readers and improve the efficiency of conventional fluorescence immunoassays.

Reliable plasmonic biosensors with high throughput and ease of use are highly sought after. Here, the authors report a plasmon-enhanced fluorescence antibody-aptamer biosensor based on a gold nanoparticle array, and demonstrate its use for effective specific detection of a malaria marker, at femtomolar level, in whole blood.

Thinking outside the shell: novel sensors designed from plasmon-enhanced fluorescent concentric nanoparticles

The alteration of photophysical properties of fluorophores in the vicinity of a metallic nanostructure, a phenomenon termed plasmon- or metal-enhanced fluorescence (MEF), has been investigated extensively and used in a variety of proof-of-concept demonstrations over the years. A particularly active area of development in this regard has been the design of nanostructures where fluorophore and metallic core are held in a stable geometry that imparts improved luminosity and photostability to a plethora of organic fluorophores. This minireview presents an overview of MEF-based concentric core-shell sensors developed in the past few years. These architectures expand the range of applications of nanoparticles (NPs) beyond the uses possible with fluorescent molecules. Design aspects that are being described include the influence of the nanocomposite structure on MEF, notably the dependence of fluorescence intensity and lifetime on the distance to the plasmonic core. The chemical composition of nanocomposites as a design feature is also discussed, taking as an example the use of non-noble plasmonic metals such as indium as core materials to enhance multiple fluorophores throughout the UV-Vis range and tune the sensitivity of halide-sensing fluorophores operating on the principle of collisional quenching. Finally, the paper describes how various solid substrates can be functionalized with MEF-based nanosensors to bestow them with intense and photostable pH-sensitive properties for use in fields such as medical therapy and diagnostics, dentistry, biochemistry and microfluidics.

Recent Developments in Plasmonic Nanostructures for Metal Enhanced Fluorescence-Based Biosensing

Metal-enhanced fluorescence (MEF) is a unique phenomenon of surface plasmons, where light interacts with the metallic nanostructures and produces electromagnetic fields to enhance the sensitivity of fluorescence-based detection. In particular, this enhancement in sensing capacity is of importance to many research areas, including medical diagnostics, forensic science, and biotechnology. The article covers the basic mechanism of MEF and recent developments in plasmonic nanostructures fabrication for efficient fluorescence signal enhancement that are critically reviewed. The implications of current fluorescence-based technologies for biosensors are summarized, which are in practice to detect different analytes relevant to food control, medical diagnostics, and forensic science. Furthermore, characteristics of existing fabrication methods have been compared on the basis of their resolution, design flexibility, and throughput. The future projections emphasize exploring the potential of non-conventional materials and hybrid fabrication techniques to further enhance the sensitivity of MEF-based biosensors.