Electrocatalytic Reduction of Disulfide Bonds across Chemical Modalities

The chemical properties of disulfides are leveraged in a wide array of applications, ranging from protein-drug conjugates for cancer treatment to self-healing materials. However, disulfide reduction strategies remain severely underdeveloped despite being the key to efficiently accessing the desired targets. Specifically, no homogeneous catalyst has been reported for this reaction, and conditions that allow the use of mild and green reductants (e.g., via electrochemical reduction) are not known. Herein, we unveil a vitamin B12-catalyzed, electrochemically driven protocol for efficiently reducing disulfide bonds in various aqueous buffers over a broad pH range. This robust and simple method is suitable for disulfide reductions of substrates ranging from small molecules to large proteins. Finally, one-pot reduction and conjugation of disulfide bonds in a monoclonal antibody were demonstrated to produce antibody conjugates.

Recent Advances on the Catalytic Asymmetric Allylic α-Alkylation of Carbonyl Derivatives Using Free Allylic Alcohols

During the last years, the development of more sustainable and straightforward methodologies to minimize the generation of waste organic substances has acquired high importance within synthetic organic chemistry. Therefore, it is not surprising that many efforts are devoted to ameliorating already well-known successful methodologies, that is, the case of the asymmetric allylic allylation reaction of carbonyl compounds. The use of free alcohols as alkylating agents in this transformation represents a step forward in this sense since it minimizes waste production and the substrate manipulation. In this review, we aim to gather the most recent methodologies describing this strategy by paying special attention to the reaction mechanisms, as well as their synthetic applications.

Operando film-electrochemical EPR spectroscopy tracks radical intermediates in surface-immobilized catalysts

The development of surface-immobilized molecular redox catalysts is an emerging research field with promising applications in sustainable chemistry. In electrocatalysis, paramagnetic species are often key intermediates in the mechanistic cycle but are inherently difficult to detect and follow by conventional in situ techniques. We report a new method, operando film-electrochemical electron paramagnetic resonance spectroscopy (FE-EPR), which enables mechanistic studies of surface-immobilized electrocatalysts. This technique enables radicals formed during redox reactions to be followed in real time under flow conditions, at room temperature and in aqueous solution. Detailed insight into surface-immobilized catalysts, as exemplified here through alcohol oxidation catalysis by a surface-immobilized nitroxide, is possible by detecting active-site paramagnetic species sensitively and quantitatively operando, thereby enabling resolution of the reaction kinetics. Our finding that the surface electron-transfer rate, which is of the same order of magnitude as the rate of catalysis (accessible from operando FE-EPR), limits catalytic efficiency has implications for the future design of better surface-immobilized catalysts.

Synthesis, modifications, and applications of iron-based nanoparticles

Magnetic nanoparticles (MNPs) are appealing materials as assistant to resolve environmental pollution issues and as recyclable catalysts for the oxidative degradation of resistant contaminants. Moreover, they can significantly influence the advancement of medical applications for imaging, diagnostics, medication administration, and biosensing. On the other hand, due to unique features, excellent biocompatibility, high curie temperatures and low cytotoxicity of the Iron-based nanoparticles, they have received increasing attention in recent years. Using an external magnetic field, in which the ferrite magnetic nanoparticles (FMNPs) in the reaction mixtures can be easily removed, make them more efficient approach than the conventional method for separating the catalyst particles by centrifugation or filtration. Ferrite magnetic nanoparticles (FMNPs) provide various advantages in food processing, environmental issues, pharmaceutical industry, sample preparation, wastewater management, water purification, illness therapy, identification of disease, tissue engineering, and biosensor creation for healthcare monitoring. Modification of FMNPs with the proper functional groups and surface modification techniques play a significant role in boosting their capability. Due to flexibility of FMNPs in functionalization and synthesis, it is possible to make customized FMNPs that can be utilized in variety of applications. This review focuses on synthesis, modifications, and applications of Iron-based nanoparticles.

Revisiting Biginelli-like reactions: solvent effects, mechanisms, biological applications and correction of several literature reports

This study critically reevaluates reported Biginelli-like reactions using a Kamlet-Abboud-Taft-based solvent effect model. Surprisingly, structural misassignments were discovered in certain multicomponent reactions, leading to the identification of pseudo three-component derivatives instead of the expected MCR adducts. Attempts to replicate literature conditions failed, prompting reconsideration of the described MCRs and proposed mechanisms. Electrospray ionization (tandem) mass spectrometry, NMR, melting points, elemental analyses and single-crystal X-ray analysis exposed inaccuracies in reported MCRs and allowed for the proposition of a complete catalytic cycle. Biological investigations using both pure and "contaminated" derivatives revealed distinctive features in assessed bioassays. A new cellular action mechanism was unveiled for a one obtained pseudo three-component adduct, suggesting similarity with the known dihydropyrimidinone Monastrol as Eg5 inhibitors, disrupting mitosis by forming monoastral mitotic spindles. Docking studies and RMSD analyses supported this hypothesis. The findings described herein underscore the necessity for a critical reexamination and potential corrections of structural assignments in several reports. This work emphasizes the significance of rigorous characterization and critical evaluation in synthetic chemistry, urging a careful reassessment of reported synthesis and biological activities associated with these compounds.

Integrated Filtration and Washing Modeling: Optimization of Impurity Rejection for Filtration and Washing of Active Pharmaceutical Ingredients

A digital design tool that can transfer material property information between unit operations to predict the product attributes in integrated purification processes has been developed to facilitate end-to-end integrated pharmaceutical manufacturing. This work aims to combine filtration and washing operations frequently using active pharmaceutical ingredient (API) isolation. This is achieved by coupling predicted and experimental data produced during the upstream crystallization process. To reduce impurities in the isolated cake, a mechanistic model-based workflow was used to optimize an integrated filtration and washing process model. The Carman-Kozeny filtration model has been combined with a custom washing model that incorporates diffusion and axial dispersion mechanisms. The developed model and approach were applied to two systems, namely, mefenamic acid and paracetamol, which are representative compounds, and various crystallization and wash solvents and related impurities were used. The custom washing model provides a detailed evolution of species concentration during washing, simulating the washing curve with the three stages of the wash curve: constant rate, intermediate stage, and diffusion stage. A model validation approach was used to estimate cake properties (e.g., specific cake resistance, cake volume, cake composition after washing, and washing curve). A global systems analysis was conducted by using the calibrated model to explore the design space and aid in the setup of the optimization decision variables. Qualitative optimization was performed in order to reduce the concentration of impurities in the final cake after washing. The findings of this work were translated into a final model to simulate the optimal isolation conditions.

Oxidation of Alcohols in Continuous Flow with a Solid Phase Hypervalent Iodine Catalyst

One of the most useful transformations in the synthetic chemist arsenal is the oxidation of alcohols to their corresponding carbonyl congeners. Despite its seemingly straightforward nature, this transformative reaction predominantly relies on the use of metals or hazardous reagents, making these processes highly unsustainable. To address this challenge, we have developed a sustainable metal-free method for the oxidation of alcohols in continuous flow. Using a solid phase hypervalent iodine catalyst and nBu4HSO5 as a phase transfer catalyst and co-oxidant, primary and secondary alcohols were selectively oxidized to the corresponding carbonyl motifs. This operationally simple continuous-flow set-up is highly robust (15 cycles run without significant catalyst leaching or loss of reaction efficiency), uses green solvents, such as acetonitrile or acetic acid, and is readily scalable.

Biocatalytic Generation of o-Quinone Imines in the Synthesis of 1,4-Benzoxazines and Its Comparative Green Chemistry Metrics

1,4-Benzoxazines are important motifs in many pharmaceuticals and can be formed by a reaction sequence involving the oxidation of o-aminophenols to their corresponding quinone imine followed by an in situ inverse electron demand Diels-Alder (IEDDA) cycloaddition with a suitable dienophile. Reported herein is the development of a reaction sequence that employs horseradish peroxidase to catalyze the oxidation of the aminophenols prior to the IEDDA as a more sustainable alternative to the use of conventional stoichiometric oxidants. The synthesis of 10 example benzoxazines is demonstrated in this "one-pot, two-step" procedure with yields between 42% and 92%. The green chemistry metrics, including the E-factor and generalized reaction mass efficiency, for this biocatalytic reaction were compared against the conventional chemical approach. It was found that the reported biocatalytic route was approximately twice as green by these measures.

Tuning Reactivity of Zr-Substituted Keggin Phosphotungstate in Alkene Epoxidation through Balancing H2O2 Activation Pathways: Unusual Effect of Base

The Zr-monosubstituted Keggin-type dimeric phosphotungstate (Bu4N)8[{PW11O39Zr(μ-OH)(H2O)}2] (1) efficiently catalyzes epoxidation of C═C bonds in various kinds of alkenes, including terminal ones, with aqueous H2O2 as oxidant. Less sterically hindered double bonds are preferably epoxidized despite their lower nucleophilicity. Basic additives (Bu4NOH) in the amount of 1 equiv per dimer 1 suppress H2O2 unproductive decomposition, increase substrate conversion, improve yield of heterolytic oxidation products and oxidant utilization efficiency, and also affect regioselectivity of epoxidation, enhancing oxygen transfer to sterically hindered electron-rich C═C bonds. Acid additives produce a reverse effect on the substrate conversion and H2O2 efficiency. The reaction mechanism was explored using a range of test substrates, kinetic, and spectroscopic tools. The opposite effects of acid and base additives on alkene epoxidation and H2O2 degradation have been rationalized in terms of their impact on hydrolysis of 1 to form monomeric species, [PW11O39Zr(OH)(H2O)x]4- (1-M, x = 1 or 2), which favors H2O2 homolytic decomposition. The interaction of 1 with H2O2 has been investigated by HR-ESI-MS, ATR-FT-IR, and 31P NMR spectroscopic techniques. The combination of spectroscopic studies and kinetic modeling implicated the existence of two types of dimeric peroxo complexes, [Zr2(μ-η2:η2-O2){PW11O39}2(H2O)x]]8- and [{Zr(μ-η2-O2)}2(PW11O39)2(H2O)y]10-, along with monomeric Zr (hydro)peroxo species that begin to dominate at a high excess of H2O2. Both dimeric μ-η2-peroxo intermediates are inert toward alkenes under stoichiometric conditions. V-shape Hammett plots obtained for epoxidation of p-substituted styrenes suggested a biphilic nature of the active oxidizing species, which are monomeric Zr-hydroperoxo and peroxo species. Small basic additives increase the electrophilicity of the catalyst and decrease its nucleophilicity. HR-ESI-MS has identified a dimeric, most likely, bridging hydroperoxo species [{PW11O39Zr}2(μ-O)(μ-OOH)]9-, which may account for the improved epoxidation selectivity and regioselectivity toward sterically hindered C═C bonds.

Research in the Field of Drug Design and Development

The processes used by academic and industrial scientists to discover new drugs have recently experienced a true renaissance, with many new and exciting techniques being developed over the past 5-10 years alone. Drug design and discovery, and the search for new safe and well-tolerated compounds, as well as the ineffectiveness of existing therapies, and society's insufficient knowledge concerning the prophylactics and pharmacotherapy of the most common diseases today, comprise a serious challenge. This can influence not only the quality of human life, but also the health of whole societies, which became evident during the COVID-19 pandemic. In general, the process of drug development consists of three main stages: drug discovery, preclinical development using cell-based and animal models/tests, clinical trials on humans and, finally, forward moving toward the step of obtaining regulatory approval, in order to market the potential drug. In this review, we will attempt to outline the first three most important consecutive phases in drug design and development, based on the experience of three cooperating and complementary academic centers of the Visegrád group; i.e., Medical University of Lublin, Poland, Masaryk University of Brno, Czech Republic, and Comenius University Bratislava, Slovak Republic.

Estimating environmental impacts of early-stage bioprocesses

The use of bioprocesses in industrial production promises resource- and energy-efficient processes starting from renewable, nonfossil feedstocks. Thus, the environmental benefits must be demonstrated, ideally in the early development phase with standardized methods such as life cycle assessment (LCA). Herein we discuss selected LCA studies of early-stage bioprocesses, highlighting their potential and contribution to estimating environmental impacts and decision support in bioprocess development. However, LCAs are rarely performed among bioprocess engineers due to challenges such as data availability and process uncertainties. To address this issue, recommendations are provided for conducting LCAs of early-stage bioprocesses. Opportunities are identified to facilitate future applicability, for example, by establishing dedicated bioprocess databases that could enable the use of LCAs as standard tools for bioprocess engineers.

Anthradithiophene (ADT)-Based Polymerized Non-Fullerene Acceptors for All-Polymer Solar Cells

Realizing efficient all-polymer solar cell (APSC) acceptors typically involves increased building block synthetic complexity, hence potentially unscalable syntheses and/or prohibitive costs. Here we report the synthesis, characterization, and implementation in APSCs of three new polymer acceptors P1-P3 using a scalable donor fragment, bis(2-octyldodecyl)anthra[1,2-b : 5,6-b']dithiophene-4,10-dicarboxylate (ADT) co-polymerized with the high-efficiency acceptor units, NDI, Y6, and IDIC. All three copolymers have comparable photophysics to known polymers; however, APSCs fabricated by blending P1, P2 and P3 with donor polymers PM5 and PM6 exhibit modest power conversion efficiencies (PCEs), with the champion P2-based APSC achieving PCE=5.64 %. Detailed morphological and microstructural analysis by AFM and GIWAXS reveal a non-optimal APSC active layer morphology, which suppresses charge transport. Despite the modest efficiencies, these APSCs demonstrate the feasibility of using ADT as a scalable and inexpensive electron rich/donor building block for APSCs.

Synthesis of Ag-Cu-Ni Nanoparticles Stabilized on Functionalized g-C3N4 and Investigation of Its Catalytic Activity in the A3-Coupling Reaction

In the present research, using ethylenediamine and hydrazine hydrate as the capping and reducing agents in this investigation, respectively, Ag-Cu-Ni NPs were immobilized on the functionalized g-C₃N₄ surface. This nanocatalyst was studied in terms of its catalytic activities for the A³-coupling reaction to synthesize propargylamine derivatives. According to the results, in the presence of 1 mL of toluene as the solvent and 20 mg of the g-C₃N₄-TCT-2AEDSEA-Ag-Cu-Ni nanocatalyst, the maximum efficiency of the nanocatalyst occurred at a temperature of 80 °C. Products were purified using thin-layer chromatography plates (silica gel) by employing n-hexane/ethyl acetate with a 90:10 ratio. In addition, the prominent benefits of the synthesized nanocatalyst include its high yields of the product, cost-effectiveness, recyclability, and easy separation. The novelty of the catalyst is due to the presence of Ag-Cu-Ni nanoparticles at the same time in the structure of the functionalized g-C₃N₄ substrate. So, Ag-Cu-Ni can be strongly connected to the substrate. The structure of the synthesized nanocatalyst was characterized using Fourier transformed infrared spectroscopy, X-ray powder diffraction, field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, vibrating-sample magnetometry, and transmission electron microscopy.

Transition-Metal-Free Dehydrogenation of Benzyl Alcohol for C-C and C-N Bond Formation for the Synthesis of Pyrazolo[3,4-b]pyridine and Pyrazoline Derivatives

A series of cascade reactions that produce a range of functionalized aromatic heterocyclic compounds with pyrazole/pyrazoline cores have been developed. The method relies on a metal-free dehydrogenative process to produce in-situ benzaldehydes. The produced benzaldehyde was then allowed to react with some other substances, including acetophenone, pyrazole amine, and phenylhydrazine. The intermediate produced from these substrates underwent several chemical processes, including electrocyclization, the aza-Diels-Alder reaction, and the formation of intramolecular C-N bonds. These positive outcomes would open up the possibility of producing biologically active pyrazolo[3,4-b]pyridine and pyrazoline derivatives through a variety of possible reactions.

POLITAG-M-F as Heterogeneous Organocatalyst for the Waste-Minimized Synthesis of β-Azido Carbonyl Compounds in Batch and under Flow Conditions

We herein report a waste minimization protocol for the β-azidation of α,β-unsaturated carbonyl compounds using TMSN₃. The selection of the appropriate catalyst (POLITAG-M-F), in combination with the reaction medium, resulted in enhanced catalytic efficiency and a low environmental footprint. The thermal and mechanical stability of the polymeric support allowed us to recover the POLITAG-M-F catalyst for up to 10 consecutive runs. The CH₃CN:H₂O azeotrope has a 2-fold positive effect on the process, increasing the efficiency of the protocol and minimizing waste generation. Indeed, the azeotropic mixture, used as a reaction medium and for the workup procedure, was recovered by distillation, leading to an easy and environmentally friendly procedure for product isolation in high yield and with a low E-factor. A comprehensive evaluation of the environmental profile was performed by the calculation of different green metrics (AE, RME, MRP, 1/SF) and a comparison with other literature available protocols. A flow protocol was defined to scale-up the process, and up to 65 mmol of substrates were efficiently converted with a productivity of 0.3 mmol/min.

Electric fields drive bond homolysis

Electric fields have been used to control and direct chemical reactions in biochemistry and enzymatic catalysis, yet directly applying external electric fields to activate reactions in bulk solution and to characterize them ex situ remains a challenge. Here we utilize the scanning tunneling microscope-based break-junction technique to investigate the electric field driven homolytic cleavage of the radical initiator 4-(methylthio)benzoic peroxyanhydride at ambient temperatures in bulk solution, without the use of co-initiators or photochemical activators. Through time-dependent ex situ quantification by high performance liquid chromatography using a UV-vis detector, we find that the electric field catalyzes the reaction. Importantly, we demonstrate that the reaction rate in a field increases linearly with the solvent dielectric constant. Using density functional theory calculations, we show that the applied electric field decreases the dissociation energy of the O-O bond and stabilizes the product relative to the reactant due to their different dipole moments.

Digital Design of Filtration and Washing of Active Pharmaceutical Ingredients via Mechanistic Modeling

To facilitate integrated end-to-end pharmaceutical manufacturing using digital design, a model capable of transferring material property information between operations to predict product attributes in integrated purification processes has been developed. The focus of the work reported here combines filtration and washing operations used in active pharmaceutical ingredient (API) purification and isolation to predict isolation performance without the need of extensive experimental work. A fixed Carman-Kozeny filtration model is integrated with several washing mechanisms (displacement, dilution, and axial dispersion). Two limiting cases are considered: case 1 where there is no change in the solid phase during isolation (no particle dissolution and/or growth), and case 2 where the liquid and solid phases are equilibrated over the course of isolation. In reality, all actual manufacturing conditions would be bracketed by these two limiting cases, so consideration of these two scenarios provides rigorous theoretical bounds for assessing isolation performance. This modeling approach aims to facilitate the selection of most appropriate models suitable for different isolation scenarios, without the requirement to use overly complex models for straightforward isolation processes. Mefenamic acid and paracetamol were selected as representative model compounds to assess a range of isolation scenarios. In each case, the objective of the models was to identify the purity of the product reached with a fixed wash ratio and minimize the changes to the crystalline particle attributes that occur during the isolation process. This was undertaken with the aim of identifying suitable criteria for the selection of appropriate filtration and washing models corresponding to relevant processing conditions, and ultimately developing guidelines for the digital design of filtration and washing processes.

Simultaneous Enantiodivergent Synthesis of Diverse Lactones and Lactams via Sequential One-Pot Enzymatic Kinetic Resolution-Ring-Closing Metathesis Reactions

One of the goals of diversity-oriented synthesis is to achieve the structural diversity of obtained compounds. As most biologically active compounds are chiral, it is important to develop enantioselective methods of their synthesis. The application of kinetic resolution in DOS is problematic because of low efficiency (max. 50% yield) and many purification steps. The further derivatization of kinetic resolution products in DOS leads to the formation of a narrow library of compounds of the same stereochemistry. To overcome these limitations, we present a new concept in which the kinetic resolution is combined, the subsequent reaction of which in a one-pot protocol leads to the simultaneous formation of two skeletally and enantiomerically diverse platform molecules for DOS. Their further derivatization can gain access to a double-sized library of products in respect to a classical approach. The validity of our concept was evidenced in enzymatic kinetic resolution followed by a ring-closing metathesis cascade. From racemic carboxylic acid ester, a simultaneous formation of enantiopure lactones and lactams was achieved. These compounds are important building blocks in organic and medicinal chemistry and until now were synthesized in separate procedures.

A Catalyst and Solvent Free Route for the Synthesis of N-Substituted Pyrrolidones from Levulinic Acid

An efficient, metal-free, catalyst-free and solvent-free methodology for the reductive amination of levulinic acid with different anilines has been developed using HBpin as the reducing reagent. This protocol offers an excellent method to avoid solvents and added catalysts on the synthesis of different kinds of N-substituted pyrrolidones under metal free conditions. It is also the first report for the synthesis of different pyrrolidones by solvent-free as well as catalyst-free methods. The proposed mechanism for the formation of pyrrolidone has been supported by DFT calculations and control experiments.

Engineering of enzymes using non-natural amino acids

In enzyme engineering, the main targets for enhancing properties are enzyme activity, stereoselective specificity, stability, substrate range, and the development of unique functions. With the advent of genetic code extension technology, non-natural amino acids (nnAAs) are able to be incorporated into proteins in a site-specific or residue-specific manner, which breaks the limit of 20 natural amino acids for protein engineering. Benefitting from this approach, numerous enzymes have been engineered with nnAAs for improved properties or extended functionality. In this review, we focus on applications and strategies for using nnAAs in enzyme engineering. Notably, approaches to computational modelling of enzymes with nnAAs are also addressed. Finally, we discuss the bottlenecks that currently need to be addressed in order to realise the broader prospects of this genetic code extension technique.

A review of the catalytic conversion of glycerol to lactic acid in the presence of aqueous base

Lactic acid is a high-value-added chemical with large production, which is used in many industries including the production of pyruvic and acrylic acids. Lactic acid is largely obtained from the oxidation of glycerol, which is a prevalent by-product of biodiesel production. However, the oxidation of glycerol to lactic acid requires harsh reaction conditions such as high temperature and pressure as well as the use of a hefty strong base. In the presence of suitable catalysts, the production of lactic acid from glycerol can be achieved under mild conditions with 1 equivalent base per mole of glycerol. Herein, we review the reports of the catalytic conversion of glycerol to lactic acid in an aqueous alkaline medium considering the reaction conditions, catalytic activity for glycerol conversion and selectivity for lactic acid. We start first with the reports on the use of homogeneous catalysts that have high catalytic activity but miserable recovery. Next, we discuss the employment of colloidal metal(0) nanoparticles as catalysts in glycerol oxidation. The papers on the use of supported metal(0) nanoparticles are reviewed according to the type of support. We then review the polymetallic and metal/metal oxide nanocatalysts used for the conversion of glycerol to lactic acid in an alkaline medium. The catalysts tested for glycerol conversion to lactic acid without any additional bases are also discussed to emphasize the importance of a strong base for catalytic performance. The proposed mechanisms of glycerol oxidation to lactic acid in the presence or absence of catalysts as well as for the formation of side products are discussed. The available experimental kinetics data are shown to fit the mechanism with the formation of glyceraldehyde from glycerol alkoxide as the rate-determining step.

Photovoltaic properties of novel reactive azobenzoquinolines: experimental and theoretical investigations

In this work, synthesis, characterization, DFT, TD-DFT study of some novel reactive azobenzoquinoline dye structures to elucidate their photovoltaic properties. The azobenzoquinoline compounds were experimentally synthesized through a series of reaction routes starting from acenaphthene to obtained aminododecylnaphthalimide and finally coupled with diazonium salts to get the desired azobenzoquinoline. Azo dye synthesized differ in the number of alkyl chains designated as (AR1, AR2, AR3, and AR4) which were experimentally analyzed using FT-IR and NMR spectroscopic methods. The synthesized structures were modelled for computational investigation using density functional theory (DFT) and time-dependent density functional theory (TD-DFT) combined with B3LYP and 6-31+G(d) basis set level of theory. The results showed that the HOMO-LUMO energy gap was steady at approximately 2.8 eV as the alkyl chain increases, which has been proven to be within the material energy gap limit for application in photovoltaic. The highest intramolecular natural bond orbital (NBO) for the studied compounds is 27.60, 55.06, 55.06, and 55.04 kcal/mol for AR1, AR2, AR3, and AR4 respectively and the donor and acceptor interacting orbitals for the highest stabilization energy (E (2)) are LP(1)N 18 and π*C 16−O 19 respectively. The photovoltaic properties in terms of light-harvesting efficiency (LHE), Short circuit current density (J SC), Gibbs free energy of injection (ΔG inj), open-circuit voltage (V OC) and Gibbs free energy of regeneration (ΔG reg) were evaluated to be within the required limit for DSSC design. Overall, the obtained theoretical photovoltaic results were compared with other experimental and computational findings, thus, are in excellent agreement for organic solar cell design.

An economical approach for peptide synthesis via regioselective C-N bond cleavage of lactams

An economical, solvent-free, and metal-free method for peptide synthesis via C-N bond cleavage using lactams has been developed. The method not only eliminates the need for condensation agents and their auxiliaries, which are essential for conventional peptide synthesis, but also exhibits high atom economy. The reaction is versatile because it can tolerate side chains bearing a range of functional groups, affording up to >99% yields of the corresponding peptides without racemisation or polymerisation. Moreover, the developed strategy enables peptide segment coupling, providing access to a hexapeptide that occurs as a repeat sequence in spider silk proteins.

Design of Artificial Enzymes Bearing Several Active Centers: New Trends, Opportunities and Problems

Harnessing enzymes which possess several catalytic activities is a topic where intense research has been carried out, mainly coupled with the development of cascade reactions. This review tries to cover the different possibilities to reach this goal: enzymes with promiscuous activities, fusion enzymes, enzymes + metal catalysts (including metal nanoparticles or site-directed attached organometallic catalyst), enzymes bearing non-canonical amino acids + metal catalysts, design of enzymes bearing a second biological but artificial active center (plurizymes) by coupling enzyme modelling and directed mutagenesis and plurizymes that have been site directed modified in both or in just one active center with an irreversible inhibitor attached to an organometallic catalyst. Some examples of cascade reactions catalyzed by the enzymes bearing several catalytic activities are also described. Finally, some foreseen problems of the use of these multi-activity enzymes are described (mainly related to the balance of the catalytic activities, necessary in many instances, or the different operational stabilities of the different catalytic activities). The design of new multi-activity enzymes (e.g., plurizymes or modified plurizymes) seems to be a topic with unarguable interest, as this may link biological and non-biological activities to establish new combo-catalysis routes.

Immobilization of Polyoxometalates on Carbon Nanotubes: Tuning Catalyst Activity, Selectivity and Stability in H2O2-Based Oxidations

In recent years, carbon nanotubes (CNTs), including N-doped ones (N-CNTs), have received significant attention as supports for the construction of heterogeneous catalysts. In this work, we summarize our progress in the application of (N)-CNTs for immobilization of anionic metal-oxygen clusters or polyoxometalates (POMs) and use of (N)-CNTs-supported POM as catalysts for liquid-phase selective oxidation of organic compounds with the green oxidant–aqueous hydrogen peroxide. We discuss here the main factors, which favor adsorption of POMs on (N)-CNTs and ensure a quasi-molecular dispersion of POM on the surface and their strong attachment to the support. The effects of the POM nature, N-doping of CNTs, acid additives, and other factors on the POM immobilization process and catalytic activity/selectivity of the (N)-CNTs-immobilized POMs are analyzed. Particular attention is drawn to the critical issue of the catalyst stability and reusability. The scope and limitations of the POM/(N)-CNTs catalysts in H2O2-based selective oxidations are discussed.

Cu-Catalysed tandem reactions for building poly hetero atom heterocycles-green chemistry tool

Of late, regio-selective tandem reactions are given much attention due to the formation of several multiple bonds in a single synthetic operation, avoids altering the reaction conditions, isolation of the intermediates during the reaction, reduces the production of toxic waste to the environment and can produce highly complex organic molecules with desired selectivity. Though, it requires the well-built knowledge for optimization of the process, it permits to make the complex organic molecules with least number of steps, and it has eventually made great interest and inspiration to the upcoming organic chemists. Presentation of current book chapter presents the Cu-Catalysed tandem reactions for building poly hetero atom heterocyclic compounds via green approach.

Engineering Isopropanol Dehydrogenase for Efficient Regeneration of Nicotinamide Cofactors

Isopropanol dehydrogenase (IPADH) is one of the most attractive options for nicotinamide cofactor regeneration due to its low cost and simple downstream processing. However, poor thermostability and strict cofactor dependency hinder its practical application for bioconversions. In this study, we simultaneously improved the thermostability (433-fold) and catalytic activity (3.3-fold) of IPADH from Brucella suis via a flexible segment engineering strategy. Meanwhile, the cofactor preference of IPADH was successfully switched from NAD(H) to NADP(H) by 1.23 × 10⁶-fold. When these variants were employed in three typical bioredox reactions to drive the synthesis of important chiral pharmaceutical building blocks, they outperformed the commonly used cofactor regeneration systems (glucose dehydrogenase [GDH], formate dehydrogenase [FDH], and lactate dehydrogenase [LDH]) with respect to efficiency of cofactor regeneration. Overall, our study provides two promising IPADH variants with complementary cofactor specificities that have great potential for wide applications. IMPORTANCE Oxidoreductases represent one group of the most important biocatalysts for synthesis of various chiral synthons. However, their practical application was hindered by the expensive nicotinamide cofactors used. Isopropanol dehydrogenase (IPADH) is one of the most attractive biocatalysts for nicotinamide cofactor regeneration. However, poor thermostability and strict cofactor dependency hinder its practical application. In this work, the thermostability and catalytic activity of an IPADH were simultaneously improved via a flexible segment engineering strategy. Meanwhile, the cofactor preference of IPADH was successfully switched from NAD(H) to NADP(H). The resultant variants show great potential for regeneration of nicotinamide cofactors, and the engineering strategy might serve as a useful approach for future engineering of other oxidoreductases.

Chiral Water-Soluble Molecular Capsules With Amphiphilic Interiors

We present the synthesis of new chiral water-soluble dimeric capsules by the multicomponent Mannich reaction between charged amino acids (glutamic acid or arginine), resorcinarene, and formaldehyde and by subsequent self-assembly. The zwitterionic character of the backbones enables electrostatic interactions between arms and induces self-assembly of dimeric capsules, namely, (L-ArgR)₂ and (L-GluR)₂, in water with a wide range of pH, as demonstrated by NMR, diffusion coefficient measurement, and circular dichroism. The assembly/disassembly processes are fast on the NMR timescale. This mode of dimerization leaves side chains available for additional interactions and creates chiral cavities of mixed hydrophobic/hydrophilic character. According to this characteristic, capsules do not bind fully nonpolar or fully polar guests but effectively encapsulate a variety of chiral molecules with mixed polar/apolar characters (aliphatic and aromatic aldehydes, epoxides, alcohols, carboxylic acids, amines, and amino acids) with moderate strength. We also demonstrate the formation of heterocapsules (GluR) (ArgR) (homo- and heterochiral) that utilize additional interactions between charged acidic and basic side chains and have better encapsulation properties than those of the homodimers.

Industrially Relevant Enzyme Cascades for Drug Synthesis and Their Ecological Assessment

Environmentally friendly and sustainable processes for the production of active pharmaceutical ingredients (APIs) gain increasing attention. Biocatalytic synthesis routes with enzyme cascades support many stated green production principles, for example, the reduced need for solvents or the biodegradability of enzymes. Multi-enzyme reactions have even more advantages such as the shift of the equilibrium towards the product side, no intermediate isolation, and the synthesis of complex molecules in one reaction pot. Despite the intriguing benefits, only a few enzyme cascades have been applied in the pharmaceutical industry so far. However, several new enzyme cascades are currently being developed in research that could be of great importance to the pharmaceutical industry. Here, we present multi-enzymatic reactions for API synthesis that are close to an industrial application. Their performances are comparable or exceed their chemical counterparts. A few enzyme cascades that are still in development are also introduced in this review. Economic and ecological considerations are made for some example cascades to assess their environmental friendliness and applicability.

A Stoichiometric Solvent-Free Protocol for Acetylation Reactions

Considering the remarkable relevance of acetylated derivatives of phenols, alcohols, and aryl and alkyl thiols in different areas of biology, as well as in synthetic organic chemistry, a sustainable solvent-free approach to perform acetylation reactions is proposed here. Acetylation reactions are classically performed using excess of acetic anhydride (Ac₂O) in solvent-free conditions or by eventually working with stoichiometric amounts of Ac₂O in organic solvents; both methods require the addition of basic or acid catalysts to promote the esterification. Therefore, they usually lead to the generation of high amounts of wastes, which sensibly raise the E-factor of the process. With the aim to develop a more sustainable system, a solvent-free, stoichiometric acetylation protocol is, thus, proposed. The naturally occurring phenol, thymol, can be converted to the corresponding—biologically active—ester with good yields, in the presence of 1% of VOSO₄. Interestingly, the process can be efficiently adopted to synthesize other thymyl esters, as well as to perform acetylation of alcohols and aryl and alkyl thiols. Remarkably, a further improvement has been achieved replacing Ac₂O with its greener alternative, isopropenyl acetate (IPA).

Preparation and Asymmetric Induction Evaluation of the First Ephedrine-Based Ligands Immobilized on Magnetic Nanoparticles

Herein, the synthesis and catalytic activity of two ephedrine-based catalysts and two ephedrine-based magnetic nanoparticle-supported catalysts are reported. All catalysts developed were tested in the addition of diethylzinc to aromatic aldehydes and in the Henry reaction. The homogeneous catalysts showed moderate catalytic activity in the organozinc addition and good activity in the Henry reaction, whereas in the case of the nanocatalyst, it was not effective in the addition of diethylzinc to aldehydes and gave reasonable results in the Henry reaction. Moreover, the nanocatalyst remained unchanged over the course of up to three catalytic cycles. To the best of our knowledge, the proposed system is the first recyclable ephedrine-based magnetic nanocatalyst employed in an enantioselective reaction.

Deoxygenative hydroboration of carboxamides: a versatile and selective synthetic approach to amines

Deoxygenative reduction of amides is considered as an attractive method for preparation of synthetically valuable amines. However, the low electrophilicity of the amide carbonyl group, high thermodynamic stability and kinetic inertness of the amides make their reduction a challenging task. Until recently, most efforts for catalytic deoxygenation of amides to amines were concentrated on hydrogenation and hydrosilylation approaches, which mainly employed precious metal catalysts and often required harsh reaction conditions and showed insufficient selectivities. Moreover, these reactions are mostly limited to secondary and tertiary amides, whereas direct reduction of primary amides to primary amines remained arduous. In contrast, deoxygenative hydroboration of amides, although it appeared less then a decade ago, has already proved advantageous in terms of the amide scope, reaction conditions and selectivity of transformations. This article provides an overview of the developments in hydroboration of amides, focusing on mechanistic aspects of these transformations and advantages of hydroboration compared to hydrogenation and hydrosilylation approaches.

Transition-Metal-Free Transfer Hydrogenative Cascade Reaction of Nitroarenes with Amines/Alcohols: Redox-Economical Access to Benzimidazoles

This report describes an efficient transition-metal-free process toward the transfer hydrogenative cascade reaction between nitroarenes and amines or alcohols. The developed redox-economical approach was realized using a combination of KO^tBu and Et₃SiH as reagents, which allows the synthesis of benzimidazole derivatives via σ-bond metathesis. The reaction conditions hold well over a wide range of substrates embedded with diverse functional groups to deliver the desired products in good to excellent yields. The mechanistic proposal has been depicted on the basis of a series of control experiments, mass spectroscopic evidence which is well supported by density functional theory (DFT) calculations with a feasible energy profile.

Cyanobacteria as Valuable Tool in Biotechnology

Cyanobacteria constitute an interesting group of photosynthetic microorganisms due to their morphological and genetic diversity that is related to their extremely long evolution process, which created the need for them to adapt to immensely heterogeneous environmental conditions. Cyanobacteria grow in salt and fresh waters as well as on the surface of soils and rocks. The diverse cell structure is characterized by the fact that they occur in many morphological forms, from small single cells through to larger ones as well as branches, threads, or spirals. Taking into account the presence of cyanobacteria in virtually all possible conditions and places on Earth, cyanobacteria represent an unexplored potential that is worth investigating. This review presents the possibilities of using algae in chosen areas of biotechnology: e.g., as biocatalysts or in industries such as the pharmaceutical industry. It covers the characteristics of secondary metabolites along with their division and the potential of using them as sources of effective drugs for many diseases. It presents an overview of the possibilities of using cyanobacteria in biotransformation processes. These processes are of great importance in the case of, for example, the neutralization of municipal, industrial, or chemical waste, the amount of which is constantly growing every year, and they are also an easier and cheaper path to obtain chemical compounds.

Deoxygenative hydroboration of primary and secondary amides: a catalyst-free and solvent-free approach

In contrast to the recent reports on catalytic hydroboration of amides to amines with pinacolborane (HBpin), a simple catalyst-free and solvent-free method for the hydroboration of a variety of amides has been realized. To get the mechanistic insights, DFT calculations have been performed.

Reported Catalytic Hydrofunctionalizations that Proceed in the Absence of Catalysts: The Importance of Control Experiments

The enlarged landscape of catalysis lies in the heart of chemistry. As the journey has set a milestone in organic synthesis, its darker side has not entered into the limelight. Studies disclose that the reported reactions by using catalysts were also attainable in the absence of catalysts in many cases. This article presents a literature collection that includes the significance of control experiments in hydrofunctionalization reactions. Systematic analysis reveals that the catalysts are ambiguous and might be unessential in chemical reactions enlisted here.

Bisulfite Addition Compounds as Substrates for Reductive Aminations in Water

Highly valued products resulting from reductive aminations utilizing shelf-stable bisulfite addition compounds of aldehydes can be made under aqueous micellar catalysis conditions. Readily available α-picolineborane serves as the stoichiometric hydride source. Recycling of the aqueous reaction medium is easily accomplished, and several applications to targets in the pharmaceutical industry are documented.