Relationships between Water's Structure and Solute Affinity at Polypeptoid Brush Surfaces

Excellent antifouling surfaces are generally thought to create a tightly bound layer of water that resists solute adsorption, and highly hydrophilic surfaces such as those with zwitterionic functionalities are of significant current interest as antifoulant strategies. However, despite significant proofs-of-concept, we still lack a fundamental understanding of how the nanoscopic structure of this hydration layer translates to reduced fouling, how surface chemistry can be tuned to achieve antifouling through hydration water, and why, in particular, zwitterionic surfaces seem so promising. Here, we use molecular dynamics simulations and free energy calculations to investigate the molecular relationships among surface chemistry, hydration water structure, and surface-solute affinity across a variety of surface-decorated chemistries. Specifically, we consider polypeptoid-decorated surfaces that display well-known experimental antifouling capabilities and that can be synthesized sequence specifically, with precise backbone positioning of, e.g., charged groups. Through simulations, we calculate the affinities of a range of small solutes to polypeptoid brush surfaces of varied side-chain chemistries. We then demonstrate that measures of the structure of surface hydration water in response to a particular surface chemistry signal solute-surface affinity; specifically, we find that zwitterionic chemistries produce solute-surface repulsion through highly coordinated hydration water while suppressing tetrahedral structuring around the solute, in contrast to uncharged surfaces that show solute-surface affinity. Based on the relationship of this structural perturbation to the affinity of small-molecule solutes, we propose a molecular mechanism by which zwitterionic surface chemistries enhance solute repulsion, with broader implications for the design of antifouling surfaces.

Utilizing the Hofmeister Effect to Induce Hydrogelation of Nonionic Supramolecular Polymers into a Therapeutic Depot

Nonionic hydrogels are of particular interest for long-term therapeutic implantation due to their minimal immunogenicity relative to their charged counterparts. However, in situ formation of nonionic supramolecular hydrogels under physiological conditions has been a challenging task. In this context, we report on our discovery of salt-triggered hydrogelation of nonionic supramolecular polymers (SPs) formed by self-assembling prodrug hydrogelators (SAPHs) through the Hofmeister effect. The designed SAPHs consist of two SN-38 units, which is an active metabolite of the anticancer drug irinotecan, and a short peptide grafted with two or four oligoethylene glycol (OEG) segments. Upon self-assembly in water, the resultant nonionic SPs can be triggered to gel upon addition of phosphate salts. Our 1 H NMR studies revealed that the added phosphates led to a change in the chemical shift of the methylene protons, suggestive of a disruption of the water-ether hydrogen bonds and consequent reorganization of the hydration shell surrounding the SPs. This deshielding effect, commensurate with the amount of salt added, likely promoted associative interactions among the SAPH filaments to percolate into a 3D network. The formed hydrogels exhibited a sustained release profile of SN-38 hydrogelator that acted potently against cancer cells.

Molecular Dynamics Study of the Antifouling Mechanism of Hydrophilic Polymer Brushes

We perform all-atom molecular dynamics simulations of the adsorption of amino acid side-chain analogues on polymer brushes. The analogues examined are nonpolar isobutane, polar propionamide, negatively charged propionate ion, and positively charged butylammonium ion. The polymer brushes consist of a sheet of graphene and strongly hydrophilic poly(carboxybetaine methacrylate) (PCBMA) or weakly hydrophilic poly(2-hydroxyethyl methacrylate) (PHEMA). The effective interactions between isobutane and polymer chains are repulsive for PCBMA and attractive for PHEMA. Gibbs energy decomposition analysis shows that this is due to the abundance of water in the PCBMA brush, which increases the steric repulsion and decreases the Lennard-Jones attraction. The affinity of the hydrophilic analogues is low for both PCBMA and PHEMA chains, but the balance between the components of the Gibbs energy is different for the two polymers. The simulations are performed at several θ, where θ is the degree of overlap of polymer chains. The antifouling performance against the neutral analogues is better for PCBMA than for PHEMA in the low and high θ regimes. However, in the middle θ regime, the antifouling performance of PHEMA is close to or better than that of PCBMA. This is attributed to the formation of a dense layer of PHEMA on the graphene surface that inhibits direct adsorption of analogue molecules on graphene. The charged analogues do not bind to either the PHEMA or PCBMA brush irrespective of θ.

Chemical antifouling strategies in sensors for food analysis: A review

Surface biofouling induced by the undesired nonspecific adsorption of foulants (e.g., coexisting proteins and cells) in food matrices is a major issue of sensors for food analysis, hindering their reliability and accuracy of sensing. This issue can be addressed by developing antifouling strategies to prevent or alleviate nonspecific binding. Chemical antifouling strategies involve the use of chemical modifiers (i.e., antifouling materials) to strongly hydrate the surface and reduce surface biofouling. Through appropriate immobilization approaches, antifouling materials can be tethered onto sensors to form antifouling surfaces with well-ordered structures, balanced surface charges, and appropriate surface density and thickness. A rational antifouling surface can reduce the matrix effect, simplify sample pretreatment, and improve analytical performance. This review summarizes recent developments in chemical antifouling strategies in sensing. Surface antifouling mechanisms and common antifouling materials are described, and factors that may influence the antifouling effects of antifouling surfaces and approaches incorporating antifouling materials onto sensing surfaces are highlighted. Moreover, the specific applications of antifouling sensors in food analysis are introduced. Finally, we provide an outlook on future developments in antifouling sensors for food analysis.

DPA-Zinc around Polyplexes Acts Like PEG to Reduce Protein Binding While Targeting Cancer Cells

Gene therapy holds great promise as an effective treatment for many diseases of genetic origin. Gene therapy works by employing cationic polymers, liposomes, and nanoparticles to condense DNA into polyplexes via electronic interactions. Then, a therapeutic gene is introduced into target cells, thereby restoring or changing cellular function. However, gene transfection efficiency remains low in vivo due to high protein binding, poor targeting ability, and substantial endosomal entrapment. Artificial sheaths containing PEG, anions, or zwitterions can be introduced onto the surface of gene carriers to prevent interaction with proteins; however, they reduce the cellular uptake efficacy, endosomal escape, targeting ability, thereby, lowering gene transfection. Here, it is reported that linking dipicolylamine-zinc (DPA-Zn) ions onto polyplex nanoparticles can produce a strong hydration water layer around the polyplex, mimicking the function of PEGylation to reduce protein binding while targeting cancer cells, augmenting cellular uptake and endosomal escape. The polyplexes with a strong hydration water layer on the surface can achieve a high gene transfection even in a 50% serum environment. This strategy provides a new solution for preventing protein adsorption while improving cellular uptake and endosomal escape.

Curcumin-Based Universal Grafting of Poly(OEGMA) Brushes and Their Antibacterial Applications

Catechol and/or pyrogallol groups are recognized as crucial for the formation of polyphenol coatings on various substrates. Meanwhile, studies on polyphenolic molecules that do not contain such groups are relatively rare. The key molecule in turmeric-based universal (i.e., substrate-independent) coatings is curcumin, which contains no catechol or pyrogallol groups. As chemically reactive hydroxyl groups would remain after curcumin coating, it is hypothesized that curcumin coating can serve as a reactive layer for controlling interfacial properties. In this study, a curcumin-based surface modification method is developed to graft polymer brushes from various substrates, including titanium dioxide, gold, glass, stainless steel, and nylon. α-Bromoisobutyryl bromide, a polymerization initiator, is introduced to the curcumin-coated substrates via esterification; subsequently, poly(oligo(ethylene glycol) methacrylate) (poly(OEGMA)) is grafted from the surfaces. Compared to the control surfaces, poly(OEGMA)-grafted surfaces significantly suppress bacterial adhesion by up to 99.4%, demonstrating their antibacterial properties. Considering its facile and versatile surface modification, curcumin-based polymer grafting can be an efficient method for controlling the chemical/physical properties of surfaces in a substrate-independent manner.

Probing the Structural Details of Chitin Nanocrystal-Water Interfaces by Three-Dimensional Atomic Force Microscopy

Chitin is one of the most abundant and renewable natural biopolymers. It exists in the form of crystalline microfibrils and is the basic structural building block of many biological materials. Its surface crystalline structure is yet to be reported at the molecular level. Herein, atomic force microscopy (AFM) in combination with molecular dynamics simulations reveals the molecular-scale structural details of the chitin nanocrystal (chitin NC)-water interface. High-resolution AFM images reveal the molecular details of chitin chain arrangements at the surfaces of individual chitin NCs, showing highly ordered, stable crystalline structures almost free of structural defects or disorder. 3D-AFM measurements with submolecular spatial resolution demonstrate that chitin NC surfaces interact strongly with interfacial water molecules creating stable, well-ordered hydration layers. Inhomogeneous encapsulation of the underlying chitin substrate by these hydration layers reflects the chitin NCs' multifaceted surface character with different chain arrangements and molecular packing. These findings provide important insights into chitin NC structures at the molecular level, which is critical for developing the properties of chitin-based nanomaterials. Furthermore, these results will contribute to a better understanding of the chemical and enzymatic hydrolysis of chitin and other native polysaccharides, which is also essential for the enzymatic conversion of biomass.

Prediction of Serum Adsorption onto Polymer Brush Films by Machine Learning

Using machine learning based on a random forest (RF) regression algorithm, we attempted to predict the amount of adsorbed serum protein on polymer brush films from the films' physicochemical information and the monomers' chemical structures constituting the films using a RF model. After the training of the RF model using the data of polymer brush films synthesized from five different types of monomers, the model became capable of predicting the amount of adsorbed protein from the chemical structure, physicochemical properties of monomer molecules, and structural parameters (density and thickness of the films). The analysis of the trained RF quantitatively provided the importance of each structural parameter and physicochemical properties of monomers toward serum protein adsorption (SPA). The ranking for the significance of the parameters agrees with our general understanding and perception. Based on the results, we discuss the correlation between brush film's physical properties (such as thickness and density) and SPA and attempt to provide a guideline for the design of antibiofouling polymer brush films.

Conjugated Molecule-Assisted Supramolecular Hydrogel with Enhanced Antibacterial and Antibiofouling Properties

The hydrogel using natural and synthetic polymers to create a cross-linking network has drawn attention in diverse bioapplications. However, inhibition of bacterial infection is still a challenge for hydrogel's wide application. In this work, we reported a supramolecular hydrogel with a good antibacterial property built from conjugated molecules. The water-soluble molecular 4,7-bis[9,9-di(2-carboxy-ethyl)-fluoren-2-yl]-2,1,3-benzothiadiazole (OFBTCOOH) physically linked with monomers via hydrophobic interaction. The free-radical polymerized poly(N-acryloyl glycinamide) was hydrogen-bond cross-linked by dual amides in the side chains to form a hydrogel. An adjustable micro-network was obtained by increasing OFBTCOOH with evidence of enhanced intermolecular interaction. The successfully integrated OFBTCOOH could be excited upon light irradiation. The energy of triplet-state excitons of OFBTCOOH transferred to the ground-state oxygen to produce singlet oxygen, which endowed the hydrogel with the antibacterial property. Meanwhile, the superhydrophilic surface of the hydrogel can bind water molecules to form a stable hydration layer, which acted as barriers to resist protein and bacterial adsorption and achieve the anti-biofouling goal. The ease in introducing conjugated polyelectrolytes may provide a formulation to functionalize hydrogels via various physical interactions.

Spontaneous desorption of protein from self-assembled monolayer (SAM)-coated gold nanoparticles induced by high temperature

The nonspecific binding of proteins with nanomaterials (NMs) is a dynamic reversible process including both protein adsorption and desorption parts, which is crucial for controlled release of protein drug loaded by nanocarriers. The nonspecific binding of proteins is susceptible to high temperature, whereas its underlying mechanism still remains elusive. Here, the binding behavior of human serum albumin (HSA) with an amino-terminated self-assembled monolayer (SAM)-coated gold (111) surface was investigated by using molecular dynamics (MD) simulations. HSA binds to the SAM surface through salt bridges at 300 K. As the temperature increases to 350 K, HSA maintains its native structure, while the salt bridges largely diminish owing to the considerable lateral diffusion of HSA on the SAM. Moreover, the interfacial water located between HSA and the SAM gets increased and prevents the reformation of the salt bridges of HSA with the SAM, which reduces the binding affinity of HSA. And HSA eventually desorbs from the SAM. The depiction of thermally induced spontaneous protein desorption enriches our understanding of reversible binding behavior of protein with NMs, and may provide new insights into the controlled release of protein drugs delivered by using nanocarriers under the regulation of high temperature.

Large scale model lipid membrane movement induced by a cation switch

A biomembrane sample system where millimolar changes of cations induce reversible large scale (≥ 200 Å) changes in the membrane-to-surface distance is described. The system composes of a free-floating bilayer, formed adjacent to a self-assembled monolayer (SAM). To examine the membrane movements, differently charged floating bilayers in the presence and absence of Ca2+ and Na+, respectively, were examined using neutron reflectivity and quartz crystal microbalance measurements, alongside molecular dynamics simulations. In neutron reflectivity the variation of Ca2+ and Na+ concentration enabled precision manipulation of the membrane-to-surface distance. Simulations suggest that Ca2+ ions bridge between SAM and bilayer whereas the more diffuse binding of Na+, especially to bilayers, is unable to fully overcome the repulsion between anionic floating bilayer and anionic SAM. Reproduced neutron reflectivity results with quartz crystal microbalance demonstrate the potential of this easily producible sample system to become a standard analysis tool for e.g. investigating membrane binding effects, endocytosis and cell signaling.

The protein corona and its effects on nanoparticle-based drug delivery systems

In most cases, once nanoparticles (NPs) enter the blood, their surface is covered by biological molecules, especially proteins, forming a so-called protein corona (PC). As a result, what the cells of the body "see" is not the NPs as formulated by the chemists, but the PC. In this way, the PC can influence the effects of the NPs and even mask the desired effects of the NP components. While this can argue for trying to inhibit protein-nanomaterial interactions, encapsulating NPs in an endogenous PC may increase their clinical usefulness. In this review, we briefly introduce the concept of the PC, its formation and its effects on the behavior of NPs. We also discuss how to reduce the formation of PCs or exploit them to enhance NP functions. Studying the interactions between proteins and NPs will provide insights into their clinical activity in health and disease. STATEMENT OF SIGNIFICANCE: The formation of protein corona (PC) will affect the operation of nanoparticles (NPs) in vivo. Since there are many proteins in the blood, it is impossible to completely overcome the formation of PC. Therefore, the use of PCs to deliver drug is the best choice. De-opsonins adsorbed on NPs can reduce macrophage phagocytosis and cytotoxicity of NPs, and prolong their circulation in blood. Albumin, apolipoprotein and transferrin are typical de-opsonins. In present review, we mainly discuss how to optimize the delivery of nanoparticles through the formation of albumin corona, transferrin corona and apolipoprotein corona in vivo or in vitro.

PEGylated Phthalocyanine-Functionalized Graphene Oxide with Ultrahigh-Efficient Photothermal Performance for Triple-Mode Antibacterial Therapy

This study proposes a novel multifunctional synergistic antibacterial phototherapy technique for the rapid healing of bacteria-infected wounds. By binding PEGylated phthalocyanines to the surface of graphene oxide via noncovalent functionalization, the photothermal conversion efficiency of the obtained nanocomposites can be significantly increased, which shows that the sample temperature can achieve nearly 100 °C after only 10 min of 450 nm light illumination at a concentration ≥25 μg/mL. Moreover, the nanocomposites can rapidly generate singlet oxygen under 680 nm light irradiation and physically cut bacterial cell membranes. The triple effects are expected to obtain a synergistic antibacterial efficiency and reduce the emergence of bacterial resistance. After dual-light irradiation for 10 min, the generation of hyperthermia and singlet oxygen can cause the death of Gram-positive and Gram-negative bacteria. The results of an in vivo experiment revealed that the as-prepared nanocomposites combined with dual-light-triggered antibacterial therapy can effectively restrain the inflammatory reaction and accelerate the healing of bacteria-infected wounds. These were confirmed by the examination of pathological tissue sections and inflammatory factors in rats with bacteria-infected wounds. This nanotherapeutic platform is a potential photoactivated antimicrobial strategy for the prevention and treatment of bacterial infection.

Machine Learning-Enabled Design and Prediction of Protein Resistance on Self-Assembled Monolayers and Beyond

The rational design of highly antifouling materials is crucial for a wide range of fundamental research and practical applications. The immense variety and complexity of the intrinsic physicochemical properties of materials (i.e., chemical structure, hydrophobicity, charge distribution, and molecular weight) and their surface coating properties (i.e., packing density, film thickness and roughness, and chain conformation) make it challenging to rationally design antifouling materials and reveal their fundamental structure-property relationships. In this work, we developed a data-driven machine learning model, a combination of factor analysis of functional group (FAFG), Pearson analysis, random forest (RF) and artificial neural network (ANN) algorithms, and Bayesian statistics, to computationally extract structure/chemical/surface features in correlation with the antifouling activity of self-assembled monolayers (SAMs) from a self-construction data set. The resultant model demonstrates the robustness of Q_CV² = 0.90 and RMSE_CV = 0.21 and the predictive ability of Q_ext² = 0.84 and RMSE_ext = 0.28, determines key descriptors and functional groups important for the antifouling activity, and enables to design original antifouling SAMs using the predicted antifouling functional groups. Three computationally designed molecules were further coated onto the surfaces in different forms of SAMs and polymer brushes. The resultant coatings with negative fouling indexes exhibited strong surface resistance to protein adsorption from undiluted blood serum and plasma, validating the model predictions. The data-driven machine learning model demonstrates their design and predictive capacity for next-generation antifouling materials and surfaces, which hopefully help to accelerate the discovery and understanding of functional materials.

Dynamic behaviors of interfacial water on the self-assembly monolayer (SAM) heterogeneous surface

Dynamic behaviors of water molecules near the surface with mixed hydrophobic and hydrophilic areas are studied by molecular dynamics simulation. More specifically, the diffusion coefficient and hydrogen bond lifetime of interfacial water on the self-assembly monolayer composed of hydrophobic and hydrophilic groups and their dependence on the mixing ratio are studied. The diffusion dramatically slows down, and the hydrogen bond lifetime considerably increases when a few hydrophilic groups are added to the hydrophobic surface. When the percentage of hydrophilic groups increases to 25%, the behavior of interfacial water is similar to the case of the pure hydrophilic surface. The sensitivity to the hydrophilic group can be attributed to the fact that the grafted hydrophilic groups can not only retard the directly bound water molecules but also affect indirectly bound water by stabilizing hydrogen bonds among interfacial water molecules.

Structure and sequence features of mussel adhesive protein lead to its salt-tolerant adhesion ability

Mussels can strongly adhere to hydrophilic minerals in sea habitats by secreting adhesive proteins. The adhesion ability of these proteins is often attributed to the presence of Dopa derived from posttranslational modification of Tyr, whereas the contribution of structural feature is overlooked. It remains largely unknown how adhesive proteins overcome the surface-bound water layer to establish underwater adhesion. Here, we use molecular dynamics simulations to probe the conformations of adhesive protein Pvfp-5β and its salt-tolerant underwater adhesion on superhydrophilic mica. Dopa and positively charged basic residues form pairs, in this intrinsically disordered protein, and these residue pairs can lead to firm surface binding. Our simulations further suggest that the unmodified Tyr shows similar functions on surface adhesion by forming pairing structure with a positively charged residue. We confirm the presence of these residue pairs and verify the strong binding ability of unmodified proteins using nuclear magnetic resonance spectroscopy and lap shear tests.

Role of carboxylic group pattern on protein surface in the recognition of iron oxide nanoparticles: A key for protein corona formation

The knowledge of protein-nanoparticle interplay is of crucial importance to predict the fate of nanomaterials in biological environments. Indeed, protein corona on nanomaterials is responsible for the physiological response of the organism, influencing cell processes, from transport to accumulation and toxicity. Herein, a comparison using four different proteins reveals the existence of patterned regions of carboxylic groups acting as recognition sites for naked iron oxide nanoparticles. Readily interacting proteins display a distinctive surface distribution of carboxylic groups, recalling the geometric shape of an ellipse. This is morphologically complementary to nanoparticles curvature and compatible with the topography of exposed Fe^III sites laying on the nanomaterial surface. The recognition site, absent in non-interacting proteins, promotes the nanoparticle harboring and allows the formation of functional protein coronas. The present work envisages the possibility of predicting the composition and the biological properties of protein corona on metal oxide nanoparticles.

Antifouling strategies in advanced electrochemical sensors and biosensors

A review presented recent development of antifouling strategies in electrochemical sensors and biosensors based on the modification methods.

Antibacterial Film Formation through Iron(III) Complexation and Oxidation-Induced Cross-Linking of OEG-DOPA

Catechols are prone to oxidative polymerization as well as complex formation with metal ions. These two features of catechols have played an important role in the construction of functional films on various surfaces. For example, marine antifouling films and antibacterial films were successfully prepared by oxidative polymerization and metal complexation of catechol-containing molecules, respectively. However, the effect of simultaneous metal complexation and oxidative polymerization on functional film formation has not yet been fully investigated. Herein, as a derivative of 3-(3,4-dihydroxyphenyl)-l-alanine (DOPA), we synthesized an ethylene glycol-derivatized DOPA (OEG-DOPA) and formed OEG-DOPA thin films based on (1) oxidative polymerization and (2) the complexation between catechol groups of OEG-DOPA and iron(III) (Fe^III) ions. Either or both approaches were used for the film formation. OEG-DOPA film formation was characterized by ellipsometry, contact angle goniometry, field emission scanning electron microscopy, and X-ray photoelectron spectroscopy. Among the conditions used, the formation of a uniform film was only achieved with the dual cross-linking system of Fe^III complexation and oxidation-induced covalent bond formation. Compared to the uncoated substrate and other OEG-DOPA films prepared under different conditions, the uniform OEG-DOPA film strongly inhibited bacterial adhesion, showing excellent antibacterial capability. We think that our surface-coating strategy can be applied to medical devices, tools, and implants where bacterial adhesion and biofilm formation should be prevented. This work can also serve as a basis for the construction of functional thin films for other catechol-functionalized materials.

Self-Assembled Fluid Phase Floating Membranes with Tunable Water Interlayers

We present a reliable method for the fabrication of fluid phase, unsaturated lipid bilayers by self-assembly onto charged Self-Assembled Monolayer (SAM) surfaces with tunable membrane to surface aqueous interlayers. Initially, the formation of water interlayers between membranes and charged surfaces was characterized using a comparative series of bilayers deposited onto charged, self-assembled monolayers by sequential layer deposition. Using neutron reflectometry, a bilayer to surface water interlayer of ∼8 Å was found between the zwitterionic phospholipid 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) membrane and an anionic carboxyl terminated grafted SAM with the formation of this layer attributed to bilayer repulsion by hydration water on the SAM surface. Furthermore, we found we could significantly reduce the technical complexity of sample fabrication through self-assembly of planar membranes onto the SAM coated surfaces. Vesicle fusion onto carboxyl-terminated monolayers yielded high coverage (>95%) bilayers of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) which floated on a 7-11 Å solution interlayer between the membrane and the surface. The surface to membrane distance was then tuned via the addition of 200 mM NaCl to the bulk solution immersing a POPC floating membrane, which caused the water interlayer to swell reversibly to ∼33 Å. This study reveals that biomimetic membrane models can be readily self-assembled from solution onto functionalized surfaces without the use of polymer supports or tethers. Once assembled, surface to membrane distance can be tailored to the experimental requirements using physiological concentrations of electrolytes. These planar bilayers only very weakly interact with the substrate and are ideally suited for use as biomimetic models for accurate in vitro biochemical and biophysical studies, as well as for technological applications, such as biosensors.

What governs the nature of fouling in forward osmosis (FO) and reverse osmosis (RO)? A molecular dynamics study

Difference in the distribution of water molecules around the protein leads to different fouling structures in FO and RO.

Hydration Layer Structure of Biofouling-Resistant Nanoparticles

Hydrophilic surface chemistries can strongly bind water to produce surfaces that are highly resistant to protein adsorption and fouling. The interfacial bound water and its distinct properties have intrigued researchers for decades, yet the relationship between the water three-dimensional structure and function in antifouling coatings remains elusive. Here, we use hydrophilic, epoxy organosilane modified silica nanoparticles to demonstrate cheap, robust, and practically applied coatings that we discover have broad-ranging, ultralow fouling properties when challenged by various proteins, bacteria, and fungal spores. To understand their excellent antifouling properties, frequency modulation-atomic force microscopy is used to directly observe the interfacial water structure at subatomic resolution, which we validate using all-atom molecular dynamic simulations that strikingly predict similar structures of water layers on the original and ultralow fouling surfaces. The convergence of experimental and modeling data reveals that suitably spaced, flexible chains with hydrophilic groups interact with water molecules to produce a connective, quasi-stable layer, consisting of dynamic interfacial water, that provides a basis for antifouling performance of ultrathin, hydrophilic surface chemistries.

Molecular-scale structures of the surface and hydration shell of bioinert mixed-charged self-assembled monolayers investigated by frequency modulation atomic force microscopy

We studied the surface structure and hydration structure of a bioinert mix-charged self-assembled monolayer (MC-SAM) comprised of sulfonic acid (SA)- and trimethylamine (TMA)-terminated thiols in liquid by frequency modulation atomic force microscopy (FM-AFM) at a molecular-scale. The TMA end groups showed a highly-ordered rectangular arrangement on a gold substrate in phosphate buffer saline (PBS). Highly structured water was observed at the interface of the MC-SAM and PBS, whereas a less structured hydration structure was observed on bioactive SAMs such as those with OH- and COO- terminal groups. Differences in surface and interface structures between the bioactive and bioinert SAMs suggest that the highly structured water at the bipolar MC-SAM surface works as a physical barrier to prevent adsorption or adhesion of protein and cells. Our results led to the idea that the hydration structure is an important factor in the determination of interactions between SAMs and biomolecules.

Lysine-Grafted MCM-41 Silica as an Antibacterial Biomaterial

This paper proposes a facile strategy for the zwitterionization of bioceramics that is based on the direct incorporation of l-lysine amino acid via the ε-amino group onto mesoporous MCM-41 materials. Fourier transform infrared (FTIR) studies of lysine-grafted MCM-41 (MCM-LYS) simultaneously showed bands at 3080 and 1540 cm-1 and bands at 1625 and 1415 cm-1 corresponding to -NH3+/COO- pairs, which demonstrate the incorporation of the amino acid on the material surface keeping its zwitterionic character. Both elemental and thermogravimetric analyses showed that the amount of grafted lysine was 8 wt. % based on the bioceramic total weight. Moreover, MCM-LYS exhibited a reduction of adhesion of S. aureus and E. coli bacteria in 33% and 50%, respectively at physiological pH, as compared with pristine MCM-41. Biofilm studies onto surfaces showed that lysine functionalization elicited a reduction of the area covered by S. aureus biofilm from 42% to only 5% (88%). This research shows a simple and effective approach to chemically modify bioceramics using single amino acids that provides zwitterionic functionality, which is useful to develop new biomaterials that are able to resist bacterial adhesion.

Mitigation of Biofilm Development on Thin-Film Composite Membranes Functionalized with Zwitterionic Polymers and Silver Nanoparticles

We demonstrate the functionalization of thin-film composite membranes with zwitterionic polymers and silver nanoparticles (AgNPs) for combating biofouling. Combining hydrophilic zwitterionic polymer brushes and biocidal AgNPs endows the membrane with dual functionality: antiadhesion and bacterial inactivation. An atom transfer radical polymerization (ATRP) reaction is used to graft zwitterionic poly(sulfobetaine methacrylate) (PSBMA) brushes to the membrane surface, while AgNPs are synthesized in situ through chemical reduction of silver. Two different membrane architectures (Ag-PSBMA and PSBMA-Ag TFC) are developed according to the sequence AgNPs, and PSBMA brushes are grafted on the membrane surface. A static adhesion assay shows that both modified membranes significantly reduced the adsorption of proteins, which served as a model organic foulant. However, improved antimicrobial activity is observed for PSBMA-Ag TFC (i.e., AgNPs on top of the polymer brush) in comparison to the Ag-PSBMA TFC membrane (i.e., polymer brush on top of AgNPs), indicating that architecture of the antifouling layer is an important factor in the design of zwitterion-silver membranes. Confocal laser scanning microscopy (CLSM) imaging indicated that PSBMA-Ag TFC membranes effectively inhibit biofilm formation under dynamic cross-flow membrane biofouling tests. Finally, we demonstrate the regeneration of AgNPs on the membrane after depletion of silver from the surface of the PSBMA-Ag TFC membrane.

Preparation, characterization, and protein-resistance of films derived from a series of α-oligo(ethylene glycol)-ω-alkenes on H–Si(111) surfaces

Films on Si(111) were prepared by photo-activated grafting of CH₂&#xe001;CH(CH₂)m(OCH₂CH₂)nOCH₃ (m = 8, 9; n = 3–7) by using different vacuum conditions. High vacuum produced a higher thickness (40 Å) and <0.8% fibrinogen adsorption (C₁₀EG₇). Films were stable even after 28 days.

Surface chemistry from wettability and charge for the control of mesenchymal stem cell fate through self-assembled monolayers

Self-assembled monolayers (SAMs) of alkanethiols on gold are highly controllable model substrates and have been employed to mimic the extracellular matrix for cell-related studies. This study aims to systematically explore how surface chemistry influences the adhesion, morphology, proliferation and osteogenic differentiation of mouse mesenchymal stem cells (mMSCs) using various functional groups (-OEG, -CH₃, -PO₃H₂, -OH, -NH₂ and -COOH). Surface analysis demonstrated that these functional groups produced a wide range of wettability and charge: -OEG (hydrophilic and moderate iso-electric point (IEP)), -CH₃ (strongly hydrophobic and low IEP), -PO₃H₂ (moderate wettability and low IEP), -OH (hydrophilic and moderate IEP), -NH₂ (moderate wettability and high IEP) and -COOH (hydrophilic and low IEP). In terms of cell responses, the effect of wettability may be more influential than charge for these groups. Moreover, compared to -OEG and -CH₃ groups, -PO₃H₂, -OH, -NH₂ and -COOH functionalities tended to promote not only cell adhesion, proliferation and osteogenic differentiation but also the expression of α_v and β₁ integrins. This finding indicates that the surface chemistry may guide mMSC activities through α_v and β₁ integrin signaling pathways. Model surfaces with controllable chemistry may provide insight into biological responses to substrate surfaces that would be useful for the design of biomaterial surfaces.

Binding Preferences of Amino Acids for Gold Nanoparticles: A Molecular Simulation Study

A better understanding of the binding preference of amino acids for gold nanoparticles of different diameters could aid in the design of peptides that bind specifically to nanoparticles of a given diameter. Here we identify the binding preference of 19 natural amino acids for three gold nanoparticles with diameters of 1.0, 2.0, and 4.0 nm, and investigate the mechanisms that govern these preferences. We calculate potentials of mean force between 36 entities (19 amino acids and 17 side chains) and the three gold nanoparticles in explicit water using well-tempered metadynamics simulations. Comparing these potentials of mean force determines the amino acids' nanoparticle binding preferences and if these preferences are controlled by the backbone, the side chain, or both. Twelve amino acids prefer to bind to the 4.0 nm gold nanoparticle, and seven prefer to bind to the 2.0 nm one. We also use atomistic molecular dynamics simulations to investigate how water molecules near the nanoparticle influence the binding of the amino acids. The solvation shells of the larger nanoparticles have higher water densities than those of the smaller nanoparticles while the orientation distributions of the water molecules in the shells of all three nanoparticles are similar. The nanoparticle preferences of the amino acids depend on whether their binding free energy is determined mainly by their ability to replace or to reorient water molecules in the nanoparticle solvation shell. The amino acids whose binding free energy depends mainly on the replacement of water molecules are likely to prefer to bind to the largest nanoparticle and tend to have relatively simple side chain structures. Those whose binding free energy depends mainly on their ability to reorient water molecules prefer a smaller nanoparticle and tend to have more complex side chain structures.

Short-chain amino acids functionalized cellulose nanofibers composite ultrafiltration membrane with enhanced properties

TOCNs were blended with cellulose acetate (CA) to fabricate a high water flux ultrafiltration membrane.

Combinatorial materials research applied to the development of new surface coatings XVI: fouling-release properties of amphiphilic polysiloxane coatings

High-throughput methods were used to prepare and characterize the fouling-release (FR) properties of an array of amphiphilic polysiloxane-based coatings possessing systematic variations in composition. The coatings were derived from a silanol-terminated polydimethylsiloxane, a silanol-terminated polytrifluorpropylmethylsiloxane (CF3-PDMS), 2-[methoxy(polyethyleneoxy)propyl]-trimethoxysilane (TMS-PEG), methyltriacetoxysilane and hexamethyldisilazane-treated fumed silica. The variables investigated were the concentration of TMS-PEG and the concentration of CF3-PDMS. In general, it was found that the TMS-PEG and the CF3-PDMS had a synergist effect on FR properties with these properties being enhanced by combining both compounds into the coating formulations. In addition, reattached adult barnacles removed from coatings possessing both TMS-PEG and relatively high levels of CF3-PDMS displayed atypical base-plate morphologies. The majority of the barnacles removed from these coatings exhibited a cupped or domed base-plate as compared to the flat base-plate observed for the control coating that did not contain TMS-PEG or CF3-PDMS. Coating surface analysis using water contact angle measurements indicated that the presence of CF3-PDMS facilitated migration of TMS-PEG to the coating/air interface during the film formation/curing process. In general, coatings containing both TMS-PEG and relatively high levels of CF3-PDMS possessed excellent FR properties.

On the hydration of subnanometric antifouling organosilane adlayers: a molecular dynamics simulation

The connection between antifouling and surface hydration is a fascinating but daunting question to answer. Herein, we use molecular dynamics (MD) computer simulations to gain further insight into the role of surface functionalities in the molecular-level structuration of water (surface kosmotropicity)--within and atop subnanometric organosilane adlayers that were shown in previous experimental work to display varied antifouling behavior. Our simulations support the hypothesized intimate link between surface hydration and antifouling, in particular the importance of both internal and interfacial hydrophilicity and kosmotropicity. The antifouling mechanism is also discussed in terms of surface dehydration energy and water dynamicity (lability and mobility), notably the crucial requirement for clustered water molecules to remain tightly bound for extensive periods of time--i.e. exhibit slow exchange dynamics. A substrate effect on surface hydration, which would also participate in endowing antifouling adlayers with hydrogel-like characteristics, is also proposed. In contrast, the role of adlayer flexibility, if any, is assigned a secondary role in these ultrathin structures made of short building blocks. The conclusions from this work are well in line with those previously drawn in the literature.

Molecular-scale surface structures of oligo(ethylene glycol)-terminated self-assembled monolayers investigated by frequency modulation atomic force microscopy in aqueous solution

The structure and protein resistance of oligo(ethylene glycol)-terminated self-assembled monolayers (OEG-SAMs) have been studied intensively using various techniques. However, their molecular-scale surface structures have not been well understood. In this study, we performed molecular-resolution imaging of OH-terminated SAMs (OH-SAMs) and hexa(ethylene glycol) SAMs (EG(6)OH-SAMs) formed on a Au(111) surface in an aqueous solution by frequency modulation atomic force microscopy (FM-AFM). The results show that most of the ethylene glycol (EG) chains in an EG(6)OH-SAM are closely packed and well-ordered to present a molecularly flat surface even in an aqueous solution. In addition, we found that EG(6)OH-SAMs have nanoscale defects, where molecules take a disordered arrangement with their molecular axes parallel to the substrate surface. We also found that the domain size (50-200 nm) of an EG(6)OH-SAM is much larger than that of OH-SAMs (10-40 nm). These findings should significantly advance molecular-scale understanding about the surface structure of OEG-SAMs.

Facet-specific assembly of proteins on SrTiO₃ polyhedral nanocrystals

Precisely controlling the protein-nanomaterial interactions at selective sites is crucial in engineering biomolecule composite architectures with tailored nanostructures and functions for a variety of biomedical applications. This strategy, however, is only beginning to be explored. Here, we demonstrate the facet-specific assembly of proteins, such as albumin, immunoglobulin and protamine, on {100} facets of SrTiO₃ polyhedral nanocrystals, while none on {110} facets. Molecular dynamics simulations indicate the immobile surface hydration layer might play a barrier role to effectively prevent proteins adsorption on specific {110} facets. This work thus provides new insights into the fundamentally understanding of protein-nanomaterial interactions, and open a novel, general and facile route to control the selective adsorption of various proteins on various nanocrystals.