Polymer time crystal: Mechanical activation of reversible bonds by low-amplitude high frequency excitations

Reversible supramolecular bonds play an important role in materials science and in biological systems. The equilibrium between open and closed bonds and the association rate can be controlled thermally, chemically, by mechanical pulling, by ultrasound, or by catalysts. In practice, these intrinsic equilibrium methods either suffer from a limited range of tunability or may damage the material. Here, we present a nonequilibrium strategy that exploits the dissipative properties of the system to control and change the dynamic properties of sacrificial and reversible networks. We show theoretically and numerically how high-frequency mechanical oscillations of very low amplitude can open or close bonds. This mechanism indicates how reversible bonds could alleviate mechanical fatigue of materials especially at low temperatures where they are fragile. In another area, it suggests that the system can be actively modified by the application of ultrasound to induce gel-fluid transitions and to activate or deactivate adhesion properties.

Acoustofluidics-Assisted Multifunctional Paper-Based Analytical Devices

Microfluidic paper-based analytical devices (μPADs) feature an economic and sensitive nature, while acoustofluidics displays contactless and versatile virtue, and both of them gained tremendous interest in the past decades. Integrating μPADs with acoustofluidic techniques provides great potential to overcome the inherent shortcomings and make appealing achievements. Here, we present acoustofluidics-assisted multifunctional paper-based analytical devices that leverage bulk acoustic waves to realize multiple applications on paper substrates, including uniform colorimetric detection, microparticle/cell enrichment, fluorescence amplification, homogeneous mixing, and nanomaterial synthesis. The glucose detection in the range of 5-15 mM was conducted to perform uniform colorimetric detection. Various types (brass powder, copper powder, diamond powder, and yeast cells) and sizes (5-200 μm) of solid particles and biological cells can be enriched on paper in a few seconds or minutes; thus, fluorescence amplification by 3 times was realized with the enrichment. The high-throughput and homogeneous mixing of two fluids can be achieved, and based on the mixing, nanomaterials (ZnO nanosheets) were synthesized on paper. We analyzed the underlying mechanisms of these applications in the devices, which are attributed to Faraday waves and Chladni patterns. With their simple fabrication and prominent effectiveness, the devices open up new possibilities for paper-based microfluidic devices.

Pathway complexity in fibre assembly: from liquid crystals to hyper-helical gelmorphs

Pathway complexity results in unique materials from the same components according to the assembly conditions. Here a chiral acyl-semicarbazide gelator forms three different gels of contrasting fibre morphology (termed 'gelmorphs') as well as lyotropic liquid crystalline droplets depending on the assembly pathway. The gels have morphologies that are either hyperhelical (HH-Gel), tape-fibre (TF-Gel) or thin fibril derived from the liquid crystalline phase (LC-Gels) and exhibit very different rheological properties. The gelator exists as three slowly interconverting conformers in solution. All three gels are comprised of an unsymmetrical, intramolecular hydrogen bonded conformer. The kinetics show that formation of the remarkable HH-Gel is cooperative and is postulated to involve association of the growing fibril with a non-gelling conformer. This single molecule dynamic conformational library shows how very different materials with different morphology and hence very contrasting materials properties can arise from pathway complexity as a result of emergent interactions during the assembly process.

Type-Independent 3D Writing and Nano-Patterning of Confined Biopolymers

Biopolymers are essential building blocks that constitute cells and tissues with well-defined molecular structures and diverse biological functions. Their three-dimensional (3D) complex architectures are used to analyze, control, and mimic various cells and their ensembles. However, the free-form and high-resolution structuring of various biopolymers remain challenging because their structural and rheological control depend critically on their polymeric types at the submicron scale. Here, direct 3D writing of intact biopolymers is demonstrated using a systemic combination of nanoscale confinement, evaporation, and solidification of a biopolymer-containing solution. A femtoliter solution is confined in an ultra-shallow liquid interface between a fine-tuned nanopipette and a chosen substrate surface to achieve directional growth of biopolymer nanowires via solvent-exclusive evaporation and concurrent solution supply. The evaporation-dependent printing is biopolymer type-independent, therefore, the 3D motor-operated precise nanopipette positioning allows in situ printing of nucleic acids, polysaccharides, and proteins with submicron resolution. By controlling concentrations and molecular weights, several different biopolymers are reproducibly patterned with desired size and geometry, and their 3D architectures are biologically active in various solvents with no structural deformation. Notably, protein-based nanowire patterns exhibit pin-point localization of spatiotemporal biofunctions, including target recognition and catalytic peroxidation, indicating their application potential in organ-on-chips and micro-tissue engineering.

Recent Advances in Stimuli-Responsive Metallogels

Recently, stimuli-responsive supramolecular gels have received significant attention because their properties can be modulated through external stimuli such as heat, light, electricity, magnetic fields, mechanical stress, pH, ions, chemicals and enzymes. Among these gels, stimuli-responsive supramolecular metallogels have shown promising applications in material science because of their fascinating redox, optical, electronic and magnetic properties. In this review, research progress on stimuli-responsive supramolecular metallogels in recent years is systematically summarized. According to external stimulus sources, stimuli-responsive supramolecular metallogels, including chemical, physical and multiple stimuli-responsive metallogels, are discussed separately. Moreover, challenges, suggestions and opportunities regarding the development of novel stimuli-responsive metallogels are presented. We believe the knowledge and inspiration gained from this review will deepen the current understanding of stimuli-responsive smart metallogels and encourage more scientists to provide valuable contributions to this topic in the coming decades.

Charge-Transfer Complex Doped Photothermal Hydrogels for Discriminating Circularly Polarized Near-Infrared Light

Hydrogels behave as potential candidates to investigate circularly polarized light (CP)-matter interaction, which however suffer from small sensitivity towards circular polarization. Here we report a general protocol to build hydrogels from π-conjugated amino acids with coassembled charge-transfer (CT) complexes, covering a wide scope of donors and acceptors, which were incorporated into stable hydrogel matrices. CT complexes formed block coassemblies with gelators, induced the emergence of macroscopic chiral helices, where efficient chirality transfer occurs to realize tunable Cotton effects from visible light to NIR-I region depending on the structures of CT pairs. The hybrid hydrogels showed tunable photothermal performances with excellent heating-cooling cycling durability. Circularly polarized NIR light selectively triggered gel-solution phase transition at different timescales. Left- and right-CP illumination generates up to 2.5 folds difference in gel collapse time that allows for direct discrimination by naked eyes.

Understanding the Interaction of Gluconamides and Gluconates with Amino Acids in Hair Care

A hair care mixture formed from a gluconamide derivative and 3-hydroxypropyl ammonium gluconate is known to strengthen hair fibers; however, the mechanism by which the mixture affects hair is unknown. To give insight into the aggregation of the target gluconamide and potential interactions between the gluconate-derived mixture and hair fibers, a range of systems were characterized by X-ray crystallography namely two polymorphic forms of the target gluconamide and three salts of 3-hydroxypropylammonium with sulfuric acid, methane sulfonic acid, and oxalic acid. The gluconamide proves to aggregate and becomes a supramolecular gelator in aniline and benzyl alcohol solution. The resulting gels were characterized by rheology, scanning electron microscopy, proton nuclear magnetic resonance, Fourier transform infrared spectroscopy, and powder X-ray diffraction.

Unnatural Amino Acid: 4-Aminopyrazolonyl Amino Acid Comprising Tri-Peptides Forms Organogel With Co-Solvent (EtOAc:Hexane)

Ampyrone is an amino-functionalized heterocyclic pyrazolone derivative that possesses therapeutic values such as analgesic, anti-inflammatory, and antipyretics. The chemical structure of ampyrone exhibits excellent hydrogen bonding sites and is considered as the potential scaffold of supramolecular self-assembly. Recently, this molecule has been derived into unnatural amino acids such as aminopyrazolone amino acid and its peptides. This report describes that one of its amino acids, O-alkylated ampyrone, containing hybrid (α/β) peptides forms organogel after sonication at 50–55°C with 0.7–0.9% (w/v) in ethyl acetate: hexane (1:3). The formation/morphology of such organogels is studied by nuclear magnetic resonance Fourier-transform infrared (FT-IR), circular dichroism (CD), scanning electron microscope (SEM), transmission electron microscopy (TEM), powder X-ray diffraction (Powder-XRD), and thermogravimetric analysis (TGA). Energy-minimized conformation of APA-peptides reveals the possibility of intermolecular hydrogen bonding. Hence, APA-peptides are promising peptidomimetics for the organogel-peptides.

Manipulating the Self-Assembly of Phenyleneethynylenes under Vibrational Strong Coupling

The chemical and physical properties of molecules and materials are known to be modified significantly under vibrational strong coupling (VSC). To gain insight into the effects of VSC on π-π interactions involved in molecular self-assembly, themselves sensitive to vacuum electromagnetic field fluctuations, the aggregation of two structural isomers (linear and V-shaped) of phenyleneethynylene under cooperative coupling was investigated. By coupling the aromatic C═C stretching band, the assembly of one of the molecules results in the formation of spheres as opposed to flakes under normal conditions. As a consequence, the electronic absorption and emission spectra of the self-assembled structures are also modified significantly. The VSC-induced changes depend not only on the type of vibration that is coupled but also on the symmetry of the phenyleneethynylene isomer. These results confirm that VSC can be used to drive molecular assemblies to new structural minima and thereby provide a new tool for supramolecular chemistry.

A peptidomimetic-based thixotropic organogel showing syneresis-induced anti-adhesion against water and ice

A peptidomimetic containing 2,6-dimethylpyridine-3,5-dicarboxylic acid and phenylalanine formed a thixotropic gel which shows syneresis under appropriate conditions and anti-adhesion against water and ice.

Self-assembled sonogels formed from 1,4-naphthalenedicarbonyldinicotinic acid hydrazide

Ultrasound-induced gelation of a novel type of gelator, 1,4-naphthalenedicarbonyl- dinicotinic acid hydrazide, is reported. The gelator self-assembled into various architectures in different solvents.

Gelation Kinetics-Structure Analysis of pH-triggered Low Molecular Weight Hydrogelators

Properties such as shear modulus, gelation time, structure of supramolecular hydrogels are strongly dependent on self-assembly, gelation triggering mechanism and processes used to form the gel. In our work we extend reported rheology analysis methodologies to pH-triggered supramolecular gels to understand structural insight using a model system based on N-N' Dibenzoyl-L-Cystine pH-triggered hydrogelator and Glucono-δ-Lactone as the trigger. We observed that Avrami growth model when applied to time-sweep rheological data of gels formed at lower trigger concentrations provide estimates of fractal dimension which agree well compared with visualization of the microstructure as seen via Confocal Laser Scanning Microscopy, for a range of gelator concentrations.

Peptide-Based Supramolecular Systems Chemistry

Peptide-based supramolecular systems chemistry seeks to mimic the ability of life forms to use conserved sets of building blocks and chemical reactions to achieve a bewildering array of functions. Building on the design principles for short peptide-based nanomaterials with properties, such as self-assembly, recognition, catalysis, and actuation, are increasingly available. Peptide-based supramolecular systems chemistry is starting to address the far greater challenge of systems-level design to access complex functions that emerge when multiple reactions and interactions are coordinated and integrated. We discuss key features relevant to systems-level design, including regulating supramolecular order and disorder, development of active and adaptive systems by considering kinetic and thermodynamic design aspects and combinatorial dynamic covalent and noncovalent interactions. Finally, we discuss how structural and dynamic design concepts, including preorganization and induced fit, are critical to the ability to develop adaptive materials with adaptive and tunable photonic, electronic, and catalytic properties. Finally, we highlight examples where multiple features are combined, resulting in chemical systems and materials that display adaptive properties that cannot be achieved without this level of integration.

Switchable Supramolecular Configurations of Al3+/LysTPY Coordination Polymers in a Hydrogel Network Controlled by Ultrasound and Heat

Coordination-driven self-assembly with controllable properties has attracted increasing interest because of its potential in biological events and material science. Herein, we report on the remote, instant, and switchable control of competitive coordination interactions via ultrasound and heat stimuli in a hydrogel network. Configurational coordination changes result in the transformation of blue-emissive and opaque Al³⁺-amide aggregations to yellow-green-emissive and transparent Al³⁺-terpyridine aggregations. Interestingly, circularly polarized luminescence "off-on" switches of the metallo-supramolecular assembly are also created by these configuration changes. Additionally, the impact of the stoichiometric ratio of Al³⁺ and LysTPY on the assembly is also studied in detail. With a higher content of Al³⁺, the hydrogel with branched and abundant junctions exhibited robust, self-healing, and self-supporting properties. This in-depth understanding of the coordination interaction adjustment will afford new insights into the preparation of stimuli-responsive metallogels.

Supramolecular Assembly of Conjugated Polymers under Vibrational Strong Coupling

Strong coupling plays a significant role in influencing chemical reactions and tuning material properties by modifying the energy landscapes of the systems. Here we study the effect of vibrational strong coupling (VSC) on supramolecular organization. For this purpose, a rigid-rod conjugated polymer known to form gels was strongly coupled together with its solvent in a microfluidic IR Fabry-Perot cavity. Absorption and fluorescence studies indicate a large modification of the self-assembly under such cooperative VSC. Electron microscopy confirms that in this case, the supramolecular morphology is totally different from that observed in the absence of strong coupling. In addition, the self-assembly kinetics are altered and depend on the solvent vibration under VSC. The results are compared to kinetic isotope effects on the self-assembly to help clarify the role of different parameters under strong coupling. These findings indicate that VSC is a valuable new tool for controlling supramolecular assemblies with broad implications for the molecular and material sciences.

Self-assembly of aramid amphiphiles into ultra-stable nanoribbons and aligned nanoribbon threads

Small-molecule self-assembly is an established route for producing high-surface-area nanostructures with readily customizable chemistries and precise molecular organization. However, these structures are fragile, exhibiting molecular exchange, migration and rearrangement-among other dynamic instabilities-and are prone to dissociation upon drying. Here we show a small-molecule platform, the aramid amphiphile, that overcomes these dynamic instabilities by incorporating a Kevlar-inspired domain into the molecular structure. Strong, anisotropic interactions between aramid amphiphiles suppress molecular exchange and elicit spontaneous self-assembly in water to form nanoribbons with lengths of up to 20 micrometres. Individual nanoribbons have a Young's modulus of 1.7 GPa and tensile strength of 1.9 GPa. We exploit this stability to extend small-molecule self-assembly to hierarchically ordered macroscopic materials outside of solvated environments. Through an aqueous shear alignment process, we organize aramid amphiphile nanoribbons into arbitrarily long, flexible threads that support 200 times their weight when dried. Tensile tests of the dry threads provide a benchmark for Young's moduli (between ~400 and 600 MPa) and extensibilities (between ~0.6 and 1.1%) that depend on the counterion chemistry. This bottom-up approach to macroscopic materials could benefit solid-state applications historically inaccessible by self-assembled nanomaterials.

Highly Emissive Water-Soluble Polysulfurated Pyrene-Based Chromophores as Dual Mode Sensors of Metal Ions

Pyrene-based materials have gained considerable attention as stimuli-responsive chemical sensors. We designed a polysulfurated arene system based on a tetra(phenylthio)pyrene core decorated with four carboxylic acid units. Three different regioisomers, ortho, meta and para were studied in organic and aqueous solution. These systems are soluble in water at pH≥8 due to the deprotonation of carboxylic acids. The addition of metal ions cannot only quench the fluorescence of the central pyrene core, but also control the formation of three-dimensional nanoscopic objects in a dual mode function. Several divalent metal ions were tested and compared. Addition of ethylenediaminetetraacetic acid (EDTA) disassembles the non-emissive supramolecular system and restores the initial fluorescence of the pyrene core.

Audible sound-controlled spatiotemporal patterns in out-of-equilibrium systems

Naturally occurring spatiotemporal patterns typically have a predictable pattern design and are reproducible over several cycles. However, the patterns obtained from artificially designed out-of-equilibrium chemical oscillating networks (such as the Belousov-Zhabotinsky reaction for example) are unpredictable and difficult to control spatiotemporally, albeit reproducible over subsequent cycles. Here, we show that it is possible to generate reproducible spatiotemporal patterns in out-of-equilibrium chemical reactions and self-assembling systems in water in the presence of sound waves, which act as a guiding physical stimulus. Audible sound-induced liquid vibrations control the dissolution of atmospheric gases (such as O₂ and CO₂) in water to generate spatiotemporal chemical patterns in the bulk of the fluid, segregating the solution into spatiotemporal domains having different redox properties or pH values. It further helps us in the organization of transiently formed supramolecular aggregates in a predictable spatiotemporal manner.

Metal-Organic Nanogel with Sulfonated Three-Dimensional Continuous Channels as a Proton Conductor

Developing novel proton conductors is crucial to the electrochemical technology for energy conversion and storage. Metal-organic frameworks (MOFs), with a highly ordered and controllable structure, have been widely explored to prepare high-performance proton conductors. Albeit the prominent merits and great potential of the MOF-based materials such as MOF pellets or composite polymer electrolytes, constructing well-defined proton-transfer channels with much lower grain boundary resistance and more homogeneous distribution deserves extensive explorations. Herein, a kind of nanostructured metal-organic gel (MOG) with a three-dimensional (3D) interconnected proton-conductive network is prepared by a facile sol-gel method using Cr³⁺ and sulfonated terephthalic as the metal source and organic ligand, respectively. During the gelation process, the primary metal-organic nanoparticles are cross-linked through mismatched growth and aggregate into the 3D well-percolated gel network. The resultant MOG features in the tunable hierarchical structure and long-range continuous proton-transfer channels, leading to remarkably reduced energy barrier for proton conduction. Attributed to the sulfonated ligand and well-interconnected proton-conductive pathways, MOG exhibits intrinsic proton conductivity that is about one order of magnitude higher than that of MIL-101-SO₃H pellet (MIL, Matérial Institut Lavoisier). The method in this study can be extended to construct long-range continuous ionic channels for a number of solid electrolytes.

Self-assembly and multifunctionality of peptide organogels: oil spill recovery, dye absorption and synthesis of conducting biomaterials

The self-assembly of a series of low molecular weight gelator dipeptides containing para amino benzoic acid has been studied in mechanistic detail. All four dipeptides form phase selective, thermoreversible, rigid gels in a large range of organic solvents and fuels such as petrol, diesel, and kerosene. The mechanism of self-assembly has been dissected in detail using several experimental techniques. Self-assembly is driven mainly by aromatic and hydrophobic interactions. Hydrogen bonding groups, though present, seem to make a trivial contribution towards the self-assembly process. Phase selective gelation abilities in fuels in the presence of acidic, basic and saline conditions, together with the easy recovery of fuels from the organogels, render the peptides potential candidates for addressing oil-spill recovery. Being electron rich systems, these organogelators can absorb cationic dyes with >90% efficiency from wastewater. Finally, conducting biomaterials have been synthesized by the insertion of reduced graphene oxide into the organogels. Such small peptide based gelator molecules, being economically viable and easy to prepare, in addition to being multifunctional, are a hot area of research in the field of materials chemistry.

High Frequency Sonoprocessing: A New Field of Cavitation-Free Acoustic Materials Synthesis, Processing, and Manipulation

Ultrasound constitutes a powerful means for materials processing. Similarly, a new field has emerged demonstrating the possibility for harnessing sound energy sources at considerably higher frequencies (10 MHz to 1 GHz) compared to conventional ultrasound (⩽3 MHz) for synthesizing and manipulating a variety of bulk, nanoscale, and biological materials. At these frequencies and the typical acoustic intensities employed, cavitation-which underpins most sonochemical or, more broadly, ultrasound-mediated processes-is largely absent, suggesting that altogether fundamentally different mechanisms are at play. Examples include the crystallization of novel morphologies or highly oriented structures; exfoliation of 2D quantum dots and nanosheets; polymer nanoparticle synthesis and encapsulation; and the possibility for manipulating the bandgap of 2D semiconducting materials or the lipid structure that makes up the cell membrane, the latter resulting in the ability to enhance intracellular molecular uptake. These fascinating examples reveal how the highly nonlinear electromechanical coupling associated with such high-frequency surface vibration gives rise to a variety of static and dynamic charge generation and transfer effects, in addition to molecular ordering, polarization, and assembly-remarkably, given the vast dimensional separation between the acoustic wavelength and characteristic molecular length scales, or between the MHz-order excitation frequencies and typical THz-order molecular vibration frequencies.

Ultrasound-induced emission color and transmittance changes of organogel based on "trans-to-cis" isomerization

Herein, instant and precise control of fluorescent emission color and transmittance could be carried out by ultrasound-promoted gel-to-gel transition of naphthalimide derivatives containing CN unit. It is proved that ultrasound triggered an irreversible and efficient configuration transformation of N1 from "trans to cis" form in gel state, which is stabilized by intermolecular hydrogen bonding interaction and not observed in the solution state.

Mechanistic Insights into the Self-Assembly of an Acid-Sensitive Photoresponsive Supramolecular Polymer

The supramolecular polymerization of an acid‐sensitive pyridyl‐based ligand (L₁) bearing a photoresponsive azobenzene moiety was elucidated by mechanistic studies. Addition of trifluoroacetic acid (TFA) led to the transformation of the antiparallel H‐bonded fibers of L₁ in methylcyclohexane into superhelical braid‐like fibers stabilized by H‐bonding of parallel‐stacked monomer units. Interestingly, L₁ dimers held together by unconventional pyridine–TFA N⋅⋅⋅H⋅⋅⋅O bridges represent the main structural elements of the assembly. UV‐light irradiation caused a strain‐driven disassembly and subsequent aggregate reconstruction, which ultimately led to short fibers. The results allowed to understand the mechanism of mutual influence of acid and light stimuli on supramolecular polymerization processes, thus opening up new possibilities to design advanced stimuli‐triggered supramolecular systems.

Is Gelation Behavior Predictable through a Crystal Engineering Approach? A Case Study in Four Similar Coordination Compounds

In this paper, a detailed study on the gelation properties of a series of terpyridine and dipyrazine-pyridine ligands in the presence of metal salts is reported. To reveal the driving forces for the self-assembly of the metallogelators, their crystal structure is scrutinized. Inspired by the gelation of CuCl₂[Terpy- nCN], where "Terpy- nCN" is 4'-( n-cyanophenyl)-2,2',6',2″-terpyridine, to look into the aggregation behavior of the related analogues, synthesis of CuCl₂[Dipyz-py- nCN] derivatives, where "Dipyz-py- nCN" is 4-( n-cyanophenyl)-2,6-di-pyrazin-2-yl-pyridine, with the same cyano groups is performed. We then find that the Dipyz-py counterpart forms crystals when the molecules are stacked in an alternating way, instead of the unidirectional one required for gel formation. A crystal engineering approach is applied to determine the interactions that are favorable for fabricating a fiber network that is likely to be present in both crystalline and gel states and to find the interaction that disturbs this delicate balance between gelation and crystallization in coordination compounds; then, we conclude that the subtle balance between the molecular shape and intermolecular interactions is the origin of the gelation and crystallization of the current molecular system. This enables us to find the mutual connection among the structure of molecules, assembly behavior, and intermolecular interactions. With our experiments, a deep understanding of the balance among solution, gelation, and crystallization with subtle molecular diversions is provided.

Influence of metal coordination and light irradiation on hierarchical self-assembly processes

Smart light-responsive supramolecular materials have been extensively investigated in the past decade, but so far the impact of metal coordination on hierarchical supramolecular structures of light-responsive building blocks has remained nearly unexplored. Herein, we unravel the hierarchical self-assembly of a small π-conjugated azo-containing pyridyl ligand that is able to respond to UV-light and metal complexation. The ligand self-assembles in an antiparallel fashion into long twisted fibers, which are then disassembled upon photoisomerization of the azobenzene groups, resulting in shorter rigid rods with a different packing motif. Complexation of Pd(ii) ions enhances the cooperativity of the aggregation and induces a molecular rearrangement into slipped stacks with subsequent formation of long thin fibers. These are then transformed into thinner, shorter rods upon light irradiation. The observed different light-responsiveness, besides clearing up the influence of metal coordination and light irradiation in self-assembly processes, paves the way towards the design of novel supramolecular photochromic systems.

Self-healing gels triggered by ultrasound with color-tunable emission based on ion recognition

Herein, O-substituted terpyridine motif was used as both rigid fluorescent π core and ion binding site, in order to construct an novel amphiphilic organogelator TEC containing cholesterol unit. We demonstrated a ultrasound induced reversible sol-gel transition approach driven by adjusted non covalent interactions and the resulted gels showed self-healing properties and tunable emission color when incorporating inorganic ions into the gel matrices. By heating-cooling process, the gel transformed to sol again. Simultaneously, the vesicle-tube morphology transition controlled by sonication and heating-cooling was also observed, together with aggregation induced emission enhancement (AIE) property of the gel. The results suggested that ultrasound promoted the J aggregations of terpyridine motifs and enhanced the hydrogen bonding interactions of TEC molecules, leading to the gelation process.

Tripeptide based super-organogelators: structure and function

The peptide based super-gelators are highly soluble in non-toxic organic solvent ethanol, the solution is easy to handle and just by spraying the ethanol solution over an oil–water mixture it is able to form an organogel at room temperature.

Ultrasound-induced gelation of a giant macrocycle

A 68-membered macrocycle undergoes ultrasound-induced supramolecular gelation in acetonitrile. The sonogel shows a remarkable thermostability, indicating that self-assembly is mediated by exceptionally robust non-covalent interactions. Model compounds indicate that the macrocyclic topology is essential for gelation to occur.

Chiral betulin-imino-chitosan hydrogels by dynamic covalent sonochemistry

A series of chiral hydrogels was prepared from a homogeneous mixture of chitosan and betulinic aldehyde in different molar ratios, under the effect of ultrasound. The hydrogelation mechanism has been investigated by FTIR and CD spectroscopy, wide angle X-ray diffraction and polarized light microscopy. The morphology of hydrogels was examined by SEM. The swelling ability has been tested in three media of different pH. It was concluded that hydrogelation occurred by different pathways, closely related to the peculiarities of the chitosan-betulin systems. Circular dichroism measurements revealed chiroptical properties of the hydrogels, correlated to their content and crosslinking pathway.

Ultrasonication-enhanced gelation properties of a versatile amphiphilic formamidine-based gelator exhibiting both organogelation and hydrogelation abilities

We describe the preparation of a novel amphiphilic gelator built from a formamidine core, which is able to form a variety of physical organogels and hydrogels at concentrations ranging from 15 to 150 mg mL^-1. Interestingly, ultrasound treatment of isotropic solutions (i.e., gel-precursor) resulted in a remarkable enhancement of the gelation kinetics as well as the gelation scope and characteristic gel properties (e.g., critical gelation concentration, gel-to-sol transition temperature, viscoelastic moduli) in comparison to the heating-cooling protocol typically used to obtain supramolecular gels. Thermoreversibility, thixotropy, injectability and multistimuli responsiveness are some of the most relevant functionalities of these gels. Electron microscopy imaging revealed the formation of entangled networks made of fibers of nanometer diameters and micrometer lengths, with different morphological features depending on the solvent. Insights into the driving forces for molecular aggregations were obtained from FTIR, NMR, PXRD and computational studies. The results suggest a major stabilization of the fibers through additive N-HO hydrogen bonds, in combination with hydrophobic interactions, over π-π stacking interactions.

Mechano-switchable, luminescent gels derived from salts of a long-chained, fatty-acid gelator

Stimulus-responsive molecular gel systems, based on metal salts of a luminescent gelator, 9,10-dioxooctadecanoic acid (DODA), are reported. These salts are structurally the simplest metallo-gelators of which we are aware that exhibit controllable mechano-responsive and luminescent properties. Aggregation is more favored by the metal salts than for DODA itself. However, gelation ability differs dramatically depending on the metal ion: whereas the salts with zinc(ii) and calcium(ii) are inefficient gelators, those with nickel(ii) and copper(ii) can gelate various aromatic liquids, alkanes, and long-chained alcohols. Unlike the DODA gels, no aggregation-induced shift in the positions of the emission spectra of the metal salts could be observed as the sols were transformed to their gel phases. Gels of both nickel(ii) and copper(ii) salts in benzonitrile are among the few known examples with crystalline networks and exhibiting thixotropic behavior. However, there are significant differences in their abilities to recover the initial viscoelastic properties. Structural data for the solid and gel states lead us to conclude that differences among the gelating abilities can be attributed principally to the specific nature of interactions of the salts at their head groups. They appear to control the mechanical and emissive properties of the gels as well as whether the initial aggregation of the salts in the sol phases will support the growth of 1D objects that are capable of maintaining strong contacts, leading to 3D networks and gel formation. Overall, the results provide a facile strategy for the design of luminescent materials with controllable mechano-responsiveness by modifying the metal ions within fibrillar assemblies.

Crystalline Dipeptide Nanobelts Based on Solid-Solid Phase Transformation Self-Assembly and Their Polarization Imaging of Cells

Controlled phase transformation involving biomolecular organization to generate dynamic biomimetic self-assembly systems and functional materials is currently an appealing topic of research on molecular materials. Herein, we achieve by ultrasonic irradiation the direct solid-solid transition of bioinspired dipeptide organization from triclinic structured aggregates to  nanofibers and eventually to monoclinic nanobelts with strong polarized luminescence. It is suggested that the locally high temperature and pressure produced by cavitation effects cleaves the hydrophobic, π-π stacking or self-locked intramolecular interactions involved in one phase state and then rearranges the molecular packing to form another well-ordered aromatic dipeptide crystalline structure. Such a sonication-modulated solid-solid phase transition evolution is governed by distinct molecular interactions at different stages of structural organization. The resulting crystalline nanobelts are for the first time applied for polarization imaging of cells, which can be advantageous to directly inspect the uptake and fate of nanoscale delivery platforms without labeling of fluorescent dyes. This finding provides a new perspective to comprehend the dynamic evolution of biomolecular self-organization with energy supply by an external field and open up a facile and versatile approach of using anisotropic nanostructures for polarization imaging of cells and even live organisms in future.

Gels with sense: supramolecular materials that respond to heat, light and sound

Advances in the field of supramolecular chemistry have made it possible, in many situations, to reliably engineer soft materials to address a specific technological problem. Particularly exciting are "smart" gels that undergo reversible physical changes on exposure to remote, non-invasive environmental stimuli. This review explores the development of gels which are transformed by heat, light and ultrasound, as well as other mechanical inputs, applied voltages and magnetic fields. Focusing on small-molecule gelators, but with reference to organic polymers and metal-organic systems, we examine how the structures of gelator assemblies influence the physical and chemical mechanisms leading to thermo-, photo- and mechano-switchable behaviour. In addition, we evaluate how the unique and versatile properties of smart materials may be exploited in a wide range of applications, including catalysis, crystal growth, ion sensing, drug delivery, data storage and biomaterial replacement.