Tricks with clicks: modification of peptidomimetic oligomers via copper-catalyzed azide-alkyne [3 + 2] cycloaddition

Design, synthesis, and evaluation of antitumor activity in Pseudolaric acid B Azole derivatives: Novel and potent angiogenesis inhibitor via regulation of the PI3K/AKT and MAPK mediated HIF-1/VEGF signaling pathway

Tumor proliferation and metastasis are intricately linked to blood vessel formation, with vascular endothelial growth factor (VEGF) playing a pivotal role in orchestrating angiogenesis throughout tumor progression. Pseudolaric acid B (PAB) has emerged as a potent inhibitor of tumor cell proliferation, migration, and angiogenesis. In efforts to enhance its efficacy, 37 derivatives of PAB were synthesized and assessed for their capacity to suppress VEGF secretion in SiHa cells under hypoxic conditions. Notably, majority of these derivatives exhibited significant inhibition of VEGF protein secretion without inducing cytotoxicity. Among them, compound M2 displayed the most potent inhibitory activity, with an IC50 value of 0.68 μM, outperforming the lead compound PAB (IC50 = 5.44 μM). Compound M2 not only curbed the migration and angiogenesis of HUVECs under hypoxic conditions but also hindered the invasion of SiHa cells. Mechanistic investigations unveiled that compound M2 may impede the accumulation and nuclear translocation of hypoxia-inducible factor 1α (HIF-1α) in SiHa cells, thereby downregulating VEGF expression. This inhibitory effect on HIF-1α was corroborated by experiments utilizing the protease inhibitor MG-132 and protein synthesis inhibitor CHX, indicating that compound M2 diminishes HIF-1α levels by reducing its synthesis. Furthermore, compound M2 was observed to modulate the PI3K/AKT/mTOR and MAPK signaling pathways in tumor cells, thereby regulating HIF-1α translation and synthesis. In vivo studies demonstrated that compound M2 exhibited low toxicity and effectively curbed tumor growth. Immunohistochemistry analyses validated that compound M2 effectively suppressed the expression of HIF-1α and VEGF in tumor tissues, underscoring its potential as a promising therapeutic agent for targeting tumor angiogenesis.

1,2,3-Triazole-Containing Azamacrocycles from Chiral Triazolopeptoids: Synthesis and Solid-State Studies

Two new chiral 1,2,3-triazole-containing macrocyclic oligoamides (i. e.: triazolopeptoid 4 and 5) were obtained through solid-phase synthesis of linear precursors followed by high dilution macrocyclization reaction. Theoretical (DFT) and spectroscopic (NMR) studies revealed the intricate interplay between the Nα-chiral side chains and their conformational attitudes. BH3-mediated reduction of the tertiary amide groups of known 1-3 and newly synthesized 4 gave novel azamacrocycles 6-9. Detection of borane complexes of azamacrocycles 6 and 9 (i. e.: 10 and 11), corroborated by X-ray diffraction studies, demonstrated the peculiar properties of 1,2,3-triazole-containing macrorings.

An insight, at the atomic level, into the structure and catalytic properties of the isomers of the Cu22 cluster

The study of structural isomerism in copper nanoclusters has been relatively limited compared to that in gold and silver nanoclusters. In this work, we present the controlled synthesis and structures of two isomeric copper nanoclusters, denoted as Cu22-1 and Cu22-2, whose compositions were determined to be Cu22(SePh)10(Se)6(P(Ph-4F)3)8 through single-crystal X-ray diffraction (SCXRD). The structural isomerism of Cu22-1 and Cu22-2 arises from the different arrangements of a few Cu(SeR)(PR3) motifs on the surface structure. These subtle changes in the surface structure also influence the distortion of the core and the spatial arrangement of the clusters, and affect the electronic structure. Furthermore, due to their distinct structures, Cu22-1 and Cu22-2 exhibit different catalytic properties in the copper-catalyzed [3 + 2] azide-alkyne cycloaddition (CuAAC). Notably, Cu22-1 demonstrates efficient catalytic activity for photoinduced AAC, achieving a yield of 90% within 1 hour. This research contributes to the understanding of structural isomerism in copper nanoclusters and offers insights into the structure-function relationship in these systems.

Topochemistry for Difficult Peptide-Polymer Synthesis: Single-Crystal-to-Single-Crystal Synthesis of an Isoleucine-Based Polymer, a Hydrophobic Coating Material

Polymers of hydrophobic amino acids are predicted to be potential coating materials for the creation of hydrophobic surfaces. The oligopeptides of hydrophobic amino acids are called "difficult peptides"; as the name suggests, it is difficult to synthesize them by conventional methods. We circumvented this synthetic challenge by adopting topochemical azide-alkyne cycloaddition (TAAC) polymerization of a hydrophobic dipeptide monomer. We designed an Ile-based dipeptide, decorated with azide and alkyne, which arrange in the crystal in a head-to-tail fashion with the azide and alkyne of the adjacent molecules in a ready-to-react orientation. The monomer, on mild heating of its crystals, undergoes regiospecific TAAC polymerization to yield a 1,4-disubstituted-triazole-linked polymer in a single-crystal-to-single-crystal fashion. The solid obtained after evaporation of the monomer solution also maintained crystallinity and underwent regiospecific topochemical polymerization as in the case of crystals. This topochemical polymerization could be studied using different techniques such as FTIR, NMR, DSC, GPC, MALDI, PXRD, and SCXRD. Since the polymer is insoluble in common solvents and hence difficult to coat surfaces, the monomer was first sprayed and evaporated on various surfaces and polymerized on the surface. Such polymer-coated surfaces exhibited water contact angles of up to 134°, showing that this Ile-derived polymer is very hydrophobic and can potentially be used as a coating material for various applications.

Access to Advanced Functional Materials through Postmodification of Biomimetic Assemblies via Click Chemistry

The design, synthesis, and fabrication of functional nanomaterials with specific properties remain a long-standing goal for many scientific fields. The self-assembly of sequence-defined biomimetic synthetic polymers presents a fundamental strategy to explore the chemical space beyond biological systems to create advanced nanomaterials. Moreover, subsequent chemical modification of existing nanostructures is a unique approach for accessing increasingly complex nanostructures and introducing functionalities. Of these modifications, covalent conjugation chemistries, such as the click reactions, have been the cornerstone for chemists and materials scientists. Herein, we highlight some recent advances that have successfully employed click chemistries for the postmodification of assembled one-dimensional (1D) and two-dimensional (2D) nanostructures to achieve applications in molecular recognition, mineralization, and optoelectronics. Specifically, biomimetic nanomaterials assembled from sequence-defined macromolecules such as peptides and peptoids are described.

Magnetic tweezers characterization of the entropic elasticity of intrinsically disordered proteins and peptoids

Understanding the conformational behavior of biopolymers is essential to unlocking knowledge of their biophysical mechanisms and functional roles. Single-molecule force spectroscopy can provide a unique perspective on this by exploiting entropic elasticity to uncover key biopolymer structural parameters. A particularly powerful approach involves the use of magnetic tweezers, which can easily generate lower stretching forces (0.1-20 pN). For forces at the low end of this range, the elastic response of biopolymers is sensitive to excluded volume effects, and they can be described by Pincus blob elasticity model that allow robust extraction of the Flory polymer scaling exponent. Here, we detail protocols for the use of magnetic tweezers for force-extension measurements of intrinsically disordered proteins and peptoids. We also discuss procedures for fitting low-force elastic curves to the predictions of polymer physics models to extract key conformational parameters.

Facile preparation of polycyclic halogen-substituted 1,2,3-triazoles by using intramolecular Huisgen cycloaddition

When 1-(ω-azidoalkyl)-2-(2,2-dihalovinyl)arenes were heated in DMF, the intramolecular Huisgen cycloaddition of an azido group with a 1,1-dihalovinyl group afforded 5-halo-1,2,3-triazole-fused tricyclic benzo compounds. Based on the remaining bromo groups, carbon elongation by the Mizoroki-Heck or Suzuki-Miyaura coupling reactions, followed by an intramolecular Friedel-Crafts reaction, afforded polycyclic compounds with fused triazole rings. Thereafter, the bromo groups were converted into 2-nitrophenyl groups via the Suzuki-Miyaura coupling reaction, which was followed by the Cadogan reaction; a fluorescent pentacyclic compound was obtained.

A Multivalent Peptoid Conjugate Modulates Androgen Receptor Transcriptional Activity to Inhibit Therapy-resistant Prostate Cancer

Prostate cancers adapt to androgen receptor (AR) pathway inhibitors and progress to castration resistance due to ongoing AR expression and function. To counter this, we developed a new approach to modulate the AR and inhibit castration-resistant prostate cancer (CRPC) using multivalent peptoid conjugates (MPC) that contain multiple copies of the AR-targeting ligand ethisterone attached to a peptidomimetic scaffold. Here, we investigated the antitumor effects of compound MPC309, a trivalent display of ethisterone conjugated to a peptoid oligomer backbone that binds to the AR with nanomolar affinity. MPC309 exhibited potent antiproliferative effects on various enzalutamide-resistant prostate cancer models, including those with AR splice variants, ligand-binding mutations, and noncanonical AR gene expression programs, as well as mouse prostate organoids harboring defined genetic alterations that mimic lethal human prostate cancer subtypes. MPC309 is taken up by cells through macropinocytosis, an endocytic process more prevalent in cancer cells than in normal ones, thus providing an opportunity to target tumors selectively. MPC309 triggers a distinct AR transcriptome compared with DHT and enzalutamide, a clinically used antiandrogen. Specifically, MPC309 enhances the expression of differentiation genes while reducing the expression of genes needed for cell division and metabolism. Mechanistically, MPC309 increases AR chromatin occupancy and alters AR interactions with coregulatory proteins in a pattern distinct from DHT. In xenograft studies, MPC309 produced significantly greater tumor suppression than enzalutamide. Altogether, MPC309 represents a promising new AR modulator that can combat resistant disease by promoting an AR antiproliferative gene expression program.

Process-Divergent Syntheses of 4- and 5-Sulfur-Functionalized 1,2,3-Triazoles via Copper-Catalyzed Azide-Alkyne Cycloadditions of 1-Phosphinyl-2-sulfanylethynes

4-Sulfanyl-substituted 1,2,3-triazoles were provided regioselectively with good yields and broad scope via consecutive t-BuOK-promoted dephosphinylation of 1-phosphinyl-2-sulfanylethynes and copper-catalyzed azide-alkyne cycloadditions (CuAAC) with alkyl azides. Unsymmetrically substituted ditriazoles were successfully obtained using a tandem dephosphinylative CuAAC protocol with diazides. Direct CuAAC of the 1-phosphinyl-2-sulfanylethynes with azides afforded regioisomeric mixtures of 4-phosphinyl-5-sulfanyl- and 5-phosphinyl-4-sulfanyl-1,2,3-triazoles that were easily separable from one another. When the phosphinyl- and sulfanyl-substituted triazoles were treated with t-BuOK, the dephosphination proceeded smoothly, yielding the corresponding 5- and 4-sulfanyltriazoles, respectively. 5-(1-Aryl-1-hydroxymethyl)-4-sulfanyltriazoles were synthesized by stepwise treatment of 5-phosphinyl-4-sulfanyltriazole with MeMgBr and arylaldehydes. Additionally, Ph₂P(O) and RS groups in the triazoles were easily converted to Ph₂P and RSO₂ by PhSiH₃-reduction and m-CPBA-oxidation, respectively. Following the dephosphinylative CuAAC of 1-phosphinyl-2-(4-t-butylphenylsulfanyl)ethyne with aryl azides and m-CPBA-oxidation, potent antagonists of pregnane X receptor LC-58 and LC-59 were successfully produced.

Macrocyclic Triazolopeptoids: A Promising Class of Extended Cyclic Peptoids

Head-to-tail cyclization of linear oligoamides containing 4-benzylaminomethyl-1H-1,2,3-triazol-1-yl acetic acid monomers afforded a novel class of "extended macrocyclic peptoids". The identification of the conformation in solution for a cyclodimer and the X-ray crystal structure of a cyclic tetraamide are reported.

Bistriazoles Connected Through a B-B Bridge, Synthesized by Highly Selective Dipolar Cycloaddition Reactions of a Diazido-diborane(4)

In this work we report the first cycloaddition reactions between a diazido diborane(4) and terminal alkynes, providing unique access to bis-1,2,3-triazoles connected by a B-B bridge. The catalyst-free reactions are highly selective, yielding exclusively the thermodynamically disfavored bis-1,4-triazoles. The reactions are enabled by the high thermal stability of the diazido-diborane [B(hpp)(N3 )]2 (hpp=1,3,4,6,7,8-hexahydro-2H-pyrimido[1,2-α]pyrimidinate). Due to the tetra-coordinate boron atoms in this reagent, the reactions are tolerant with respect to the introduction of Lewis-basic groups at the alkyne. The scope and limitations of the new reactions are discussed.

New Acetamidine Cu(II) Schiff base complex supported on magnetic nanoparticles pectin for the synthesis of triazoles using click chemistry

In this project, the new catalyst copper defines as Fe3O4@Pectin@(CH2)3-Acetamide-Cu(II) was successfully manufactured and fully characterized by different techniques, including FT-IR, XRD, TEM, FESEM, EDX, VSM, TGA, and ICP analysis. All results showed that copper was successfully supported on the polymer-coated magnetic nanoparticles. One of the most important properties of a catalyst is the ability to be prepared from simple materials such as pectin that's a biopolymer that is widely found in nature. The catalytic activity of Fe3O4@Pectin@(CH2)3-Acetamide-Cu(II) was examined in a classical, one pot, and the three-component reaction of terminal alkynes, alkyl halides, and sodium azide in water and observed, proceeding smoothly and completed in good yields and high regioselectivity. The critical potential interests of the present method include high yields, recyclability of catalyst, easy workup, using an eco-friendly solvent, and the ability to sustain a variety of functional groups, which give economical as well as ecological rewards. The capability of the nanocomposite was compared with previous works, and the nanocomposite was found more efficient, economical, and reproducible. Also, the catalyst can be easily removed from the reaction solution using an external magnet and reused for five runs without reduction in catalyst activity.

1,6-Addition of 1,2,3-NH triazoles to para-quinone methides: Facile access to highly selective N1 and N2 substituted triazoles

The regioselective syntheses of N¹ and N² substituted triazoles through a 1,6-addition reaction of 1,2,3-NH triazoles to p-quinone methide were achieved under mild reaction conditions. The present reactions showed superior results in terms of selectivity, mild reaction conditions, short reaction time and broad substrate scope with good functional-group compatibility. Considering the high synthetic value of N¹- and N²-substituted compounds and p-QM related research, the present strategy will greatly benefit researchers in various fields.

Green by Design: Convergent Synthesis, Computational Analyses, and Activity Evaluation of New FXa Inhibitors Bearing Peptide Triazole Linking Units

Green chemistry implementation has led to promising results in waste reduction in the pharmaceutical industry. However, the early sustainable development of pharmaceutically active compounds and ingredients remains a considerable challenge. Herein, we wish to report a green synthesis of new pharmaceutically active peptide triazoles as potent factor Xa inhibitors, an important drug target associated with the treatment of diverse cardiovascular diseases. The new inhibitors were synthesized in three steps, featuring cycloaddition reactions (high atom economy), microwave-assisted organic synthesis (energy efficiency), and copper nanoparticle catalysis, thus featuring Earth-abundant metals. The molecules obtained showed FXa inhibition, with IC50-values as low as 17.2 μM and no associated cytotoxicity in HEK293 and HeLa cells. These results showcase the environmental potential and chemical implications of the applied methodologies for the development of new molecules with pharmacological potential.

A DFT Study on the Binuclear Copper(I)-Catalyzed Synthesis Mechanism of 1,2,3-Triazolo[1,5-c]Pyrimidine via Interrupted Click and Ketenimine Rearrangement

In this paper, the mechanism of the full catalytic cycle for binuclear Cu(I)-catalyzed sulfonyl azide-alkyne cycloaddition reaction for the synthesis of triazolopyrimidines was rationalized by density functional theoretical (DFT) calculations. The computed reaction route consists of: (a) formation of dicopper intermediates, including C-H activation of terminal alkyne, 3+2 ring cycloaddition and ring-reducing reaction and transmetalation, (b) interrupted CuAAC reaction, including di-copper catalyzed ring-opening of 2H-azirines and C-C bond formation to generate the copper-triazoles and -ketenimines, (c) two-step C-N cross-coupling and following (d) multi-step hydrogen transfer by the hydrogen bonding chain of water to promote the C-N formation and another C-N cleavage through the removal of p-tolyl sulfonamides. Our DFT results indicate that the multi-step hydrogen transfer process is the rate-determining step along the potential energy surface profile. The explicit water model was used for systematic determination of barrier for C-C cross-coupling, C-N bond formation and cleavage, and p-tolylsulfonamide removal. A critical insight in the interrupted CuAAC reaction was proposed. Further prediction interprets H₂ O hydrogen bond chain plays an important role in C-N bond formation and cleavage, and the removal of p-tolylsulfonamide. This may have fundamental guidance on the design of 1, 5-herterocyclic functionalized triazolopyrimidines via interrupted CuAAC rearrangement reaction, as well as hydrogen bond chain of water.

Cu(I)-Catalyzed Click Chemistry in Glycoscience and Their Diverse Applications

Copper(I)-catalyzed 1,3-dipolar cycloaddition between organic azides and terminal alkynes, commonly known as CuAAC or click chemistry, has been identified as one of the most successful, versatile, reliable, and modular strategies for the rapid and regioselective construction of 1,4-disubstituted 1,2,3-triazoles as diversely functionalized molecules. Carbohydrates, an integral part of living cells, have several fascinating features, including their structural diversity, biocompatibility, bioavailability, hydrophilicity, and superior ADME properties with minimal toxicity, which support increased demand to explore them as versatile scaffolds for easy access to diverse glycohybrids and well-defined glycoconjugates for complete chemical, biochemical, and pharmacological investigations. This review highlights the successful development of CuAAC or click chemistry in emerging areas of glycoscience, including the synthesis of triazole appended carbohydrate-containing molecular architectures (mainly glycohybrids, glycoconjugates, glycopolymers, glycopeptides, glycoproteins, glycolipids, glycoclusters, and glycodendrimers through regioselective triazole forming modular and bio-orthogonal coupling protocols). It discusses the widespread applications of these glycoproducts as enzyme inhibitors in drug discovery and development, sensing, gelation, chelation, glycosylation, and catalysis. This review also covers the impact of click chemistry and provides future perspectives on its role in various emerging disciplines of science and technology.

Triazole-Modified Nucleic Acids for the Application in Bioorganic and Medicinal Chemistry

This review covers studies which exploit triazole-modified nucleic acids in the range of chemistry and biology to medicine. The 1,2,3-triazole unit, which is obtained via click chemistry approach, shows valuable and unique properties. For example, it does not occur in nature, constitutes an additional pharmacophore with attractive properties being resistant to hydrolysis and other reactions at physiological pH, exhibits biological activity (i.e., antibacterial, antitumor, and antiviral), and can be considered as a rigid mimetic of amide linkage. Herein, it is presented a whole area of useful artificial compounds, from the clickable monomers and dimers to modified oligonucleotides, in the field of nucleic acids sciences. Such modifications of internucleotide linkages are designed to increase the hybridization binding affinity toward native DNA or RNA, to enhance resistance to nucleases, and to improve ability to penetrate cell membranes. The insertion of an artificial backbone is used for understanding effects of chemically modified oligonucleotides, and their potential usefulness in therapeutic applications. We describe the state-of-the-art knowledge on their implications for synthetic genes and other large modified DNA and RNA constructs including non-coding RNAs.

1,3-Dipolar Cycloaddition between Dehydroalanines and C,N-Cyclic Azomethine Imines: Application to Late-Stage Peptide Modification

A non-catalytic, mild, and easy-to-handle protecting group switched 1,3-dipolar cycloaddition (1,3-DC) between bi- or mono-N-protected Dha and C,N-cyclic azomethine imines, which afford various quaternary amino acids with diverse scaffolds, is disclosed. Specifically, normal-electron-demand 1,3-DC reaction occurs between bi-N-protected Dha and C,N-cyclic azomethine imines, while inverse-electron-demand 1,3-DC reaction occurs between mono-N-protected Dha and C,N-cyclic azomethine imines. Above all, the reactions can be carried out between peptides with Dha residues at the position of interest and C,N-cyclic azomethine imines, both in homogeneous phase and on resins in SPPS. It provides a new toolkit for late-stage peptide modification, labeling, and peptide-drug conjugation. To shed light on the high regioselectivity of the reaction, DFT calculations were carried out, which were qualitatively consistent with the experimental observations.

Prolinamide plays a key role in promoting copper-catalyzed cycloaddition of azides and alkynes in aqueous media via unprecedented metallacycle intermediates

Room temperature copper-catalyzed cycloaddition of azides and alkynes (CuAAC) proceeds in the presence of a prolinamide ligand in aqueous media via unique metallacycles.

1,2,3-Triazole-based sequence-defined oligomers and polymers

This review offers a summary on the advances in the construction of 1,2,3-triazole-based sequence-defined oligomers and polymers through MAAC-based ISG or IEG strategies.

Copper-azide nanoparticle: a 'catalyst-cum-reagent' for the designing of 5-alkynyl 1,4-disubstituted triazoles

A single pot, wet chemical route has been applied for the synthesis of polymer supported copper azide, CuN₃, nanoparticles (CANP). The hybrid system was used as 'catalyst-cum-reagent' for the azide-alkyne cyclo-addition reaction to construct triazole molecules using substituted benzyl bromide and terminal alkyne. The electron donating group containing terminal alkyne produced 5-alkynyl 1,4-disubstituded triazole product whereas for alkyne molecule with terminal electron withdrawing group facilitate the formation of 1,4-disubstituted triazole molecule.

Organocatalytic enone-azide [3 + 2]-cycloaddition: synthesis of functionally rich C/N-double vinyl 1,2,3-triazoles

An enolate-mediated organocatalytic [3 + 2]-cycloaddition of enones with less reactive vinyl/alkyl/aryl azides is reported at room temperature for short reaction times. The metal-free amine-mediated catalytic conditions of this [3 + 2]-cycloaddition allowed us to synthesize a collection of C/N-double vinyl-1,2,3-triazoles and C-vinyl-1,2,3-triazoles through functionalized enones as quality azidophiles with various azides. It is an efficient catalytic [3 + 2]-cycloaddition for the synthesis of biologically important fully decorated C/N-double vinyl-1,2,3-triazoles with excellent outcomes with reference to the reaction rate, selectivity, operation simplicity, substrate scope, yields, and synthetic applications as demonstrated in the paper. Herein, we illustrated the importance of enolate reactivity with azides compared to enamines by correlation with previous enamine-mediated click reactions in the reaction mechanism section.

Silver-mediated three-component cycloaddition reaction for direct synthesis of 1-N-vinyl-substituted 1,2,3-triazoles

Herein, we report direct synthesis of 1-N-vinyl-1,2,3-triazoles via silver-mediated three-component cycloaddition reaction of phenylacetylenes, trimethylsilylazide, and 1,3-dicarbonyl compounds. The synthetic protocol proceeds with operational simplicity, good substrate and functional group compatibility, and easily available feedstocks, and without the need for pre-installation of vinylazide precursors, and offers a practical method for the efficient elaboration of triazole derivatives.

Topochemical Azide-Alkyne Cycloaddition Reaction

Topochemical reactions are solid-state reactions that transpire under the strict control of molecular packing in the crystal lattice. Due to this lattice control, these reactions generate products in a regio-/stereospecific manner and in very high yields. In a broader sense, topochemical reactions mimic nature's way of carrying out reactions in a confined environment of enzymes giving specific products. Apart from their remarkable specificity, topochemical reactions have many other interesting features that make these reactions more attractive than solution-phase reactions. Solution-phase reactions necessitate the use of reactants, reagents, catalysts, and solvents and often give products along with varying amounts of byproducts, necessitating complex workup and chromatographic purification using various chemicals. These inevitable chemical wastes from solution-state reactions could be avoided by topochemical reactions, as they are solvent-free and catalyst-free and often do not require any chromatographic purification in view of their specificity and high yielding nature. Also the confinement offered by the crystal lattice gives products that are not possible by solution-phase reactions. Another interesting feature of topochemical reactions is the possibility of formation of products in an ordered (crystalline) form, which imparts interesting properties. Thus, topochemical reactions have control not only at the molecular level (regio-/stereospecificity) but also at the supramolecular level (packing). Many topochemical reactions happen in single-crystal-to-single-crystal (SCSC) fashion, and crystal structure analysis of such reactions often gives mechanistic insights and knowledge about the geometrical criteria required for the reaction. Despite all these attractive features, reactions that can be done topochemically are limited. There is tremendous interest in the development of new categories of topochemical reactions and strategies to achieve reactivity in crystals. In this Account, we will summarize our attempts to develop topochemical azide-alkyne cycloaddition (TAAC) reactions. We have used hydrogen-bonding as the main noncovalent interaction for aligning azide-and-alkyne-substituted derivatives of various biomolecules in orientations suitable for their proximity-driven cycloaddition reaction in crystals. Overall, three major classes of biomolecules; carbohydrates, nucleosides, and peptides were successfully exploited for their TAAC reactions using conventional O-H···O, N-H···O, and N-H···N hydrogen bonds as supramolecular glues for controlling their assembly in crystals. The crystals of these monomers underwent TAAC reaction either spontaneously at room temperature or under heating yielding triazole-linked biopolymer mimics. The ordered packing of product molecules imparted special properties to the products formed. The legendary "cream of the crop" azide-alkyne click reaction has diverse applications in the areas of bioconjugation, material science, polymer synthesis, and so forth. Belonging to the same genre, TAAC is a novel metal-free approach for making the triazole-linked products employing the ordered crystal/gel as a reaction medium. In brief, our studies suggest that TAAC reaction can be implemented in diverse molecular categories and has high potential to develop into a field with practical applications.

Organocatalyzed preparation of 1,4,5-trisubstituted-glycosyl-1,2,3-triazole derivatives

Organocatalytic coupling of glycosyl azides with enolates of active ketones and esters through azide-enolate [3 + 2] cycloaddition in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) furnished 1,4,5-trisubstituted-glycosyl-1,2,3-triazole derivatives in excellent yield. The reaction condition is simple and can be scaled-up. Graphical abstract Coupling of glycosyl azides with active ketones through azide-enolate [3 + 2] cycloaddition in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) furnished 1,4,5-trisubstituted-glycosyl-1,2,3-triazole derivatives in excellent yield.

Transition-metal-free regioselective construction of 1,5-diaryl-1,2,3-triazoles through dehydrative cycloaddition of alcohols with aryl azides mediated by SO2F2

A novel, simple and practical method for mild, efficient, cost-effective and regioselective synthesis of highly valuable 1,5-diaryl-1,2,3-triazoles was achieved through dehydrative annulation of readily available alcohols with aryl azides. The reaction proceeded at room temperature, without any metal catalysts, exhibiting excellent compatibility to a large variety of functional groups (>50 examples), resulting in up to quantitative yields.

How are 1,2,3-triazoles accommodated in helical secondary structures?

1,4-Disubstituted-1,2,3-triazole (Tz) is widely used in peptides as a trans-amide bond mimic, despite having hazardous effects on the native peptide activity. The impact of amide bond substitution by Tz on peptide secondary structures is scarcely documented. We performed a Tz scan, by systematically replacing peptide bonds following the Aib residues with Tz on two model peptaibols: alamethicin F50/5 and bergofungin D, which adopt stable α- and 310 helices, respectively. We observed that the Tz insertion, whatever its position in the peptide sequences, abolished their antimicrobial activity. The structural consequences of this insertion were further investigated using CD, NMR and X-ray diffraction. Importantly, five crystal structures that were incorporated with Tz were solved, showing various degrees of alteration of the helical structures, from minor structural perturbation of the helix to partial disorder. Together, these results showed that Tz insertions impair helical secondary structures.

Applications of sulfuryl fluoride (SO2F2) in chemical transformations

A number of novel methodologies concerning the chemical, biological and medicinal applications of sulfuryl fluoride (SO₂F₂) gas have dramatically improved year by year.

Carbohydrate-functionalized N-heterocyclic carbene Ru(ii) complexes: synthesis, characterization and catalytic transfer hydrogenation activity

Triazolylidene NHCs decorated with a carbohydrate wingtip group were complexed to a ruthenium(ii) center. Deprotection of the carbohydrate in the metal complex affords a carbohydrate–NHC hybrid system for use as a transfer hydrogenation catalyst.