Controllable synthesis of nanostructured BaSO4 and BaSO3 crystals on the basis of DMSO oxidation chemistry

Controllable synthesis of BaSO₄ or BaSO₃ crystals on the basis of a SO₂ release method.

Spectroscopic studies and antibacterial activities of pure and various levels of Cu-doped BaSO₄ nanoparticles

The present study was made to design the pure and various levels of Cu doped (0.025 M, 0.05 M and 0.075 M) BaSO4 NPs synthesized by chemical precipitation method. The synthesized products have been characterised by X-ray Diffractometer (XRD), Fourier transform infrared (FT-IR) spectrometer, thermogravimetric and differential thermal analysis (TG-DTA), UV-Vis-diffused reflectance spectroscopy (UV-Vis-DRS), field emission-scanning electron microscopy with energy dispersive spectroscopy (FE-SEM with EDS), transmission electron microscopy (TEM) and application oriented study like antibacterial activity also reported. The result determined from XRD was affirmed by the results obtained from electron microscopic measurements. XRD study revealed that the synthesized products were composed of orthorhombic structure and highly crystalline in nature. Furthermore, flaky like morphology of pure and Cu-BaSO4 nanoparticles have been observed from the images obtained from these studies. The existence of Cu(2+) was confirmed by EDS analysis. The functional groups of the synthesized samples were analysed by FT-IR study. The band gap energies of pure and doped samples were accomplished using UV-Vis-DRS analysis. Also, the kinetic parameters were evaluated and reported from the thermal stability of nanoparticles. Eventually, gram-negative bacteria shows the less antibacterial activities compared to gram-positive bacteria due to adsorption of BaSO4 nanoparticles on the surface of the used bacteria.

Surface functionalized barium sulfate nanoparticles: controlled in situ synthesis and application in bone cement

Controlled in situ synthesis of MSAH-coated BaSO₄ nanoparticles improves the mechanical properties and in vitro biocompatibility of the bone cements.

Salt-assisted direct exfoliation of graphite into high-quality, large-size, few-layer graphene sheets

We report a facile and low-cost method to directly exfoliate graphite powders into large-size, high-quality, and solution-dispersible few-layer graphene sheets. In this method, aqueous mixtures of graphite and inorganic salts such as NaCl and CuCl2 are stirred, and subsequently dried by evaporation. Finally, the mixture powders are dispersed into an orthogonal organic solvent solution of the salt by low-power and short-time ultrasonication, which exfoliates graphite into few-layer graphene sheets. We find that the as-made graphene sheets contain little oxygen, and 86% of them are 1-5 layers with lateral sizes as large as 210 μm(2). Importantly, the as-made graphene can be readily dispersed into aqueous solution in the presence of surfactant and thus is compatible with various solution-processing techniques towards graphene-based thin film devices.

CR@BaSO4: an acid rain-indicating material

The CR@BaSO(4) hybrid was synthesized, characterized and used as an acid rain-indicating (ARI) material. A painted ARI umbrella was discolored after exposure to simulated acid rain of pH 5 or less and returned to the initial color after the rain stopped. Such a functionalized material may make acid rain visual to remind people in real-time.

Synthetic dye--inorganic salt hybrid colorants for application in thermoplastics

Common synthetic dyes, e.g., Weak Acid Pink Red B (APRB, C.I. 18073), Mordant Blue 9 (MB, C.I.14855) and Acid Brilliant Blue 6B (ABB6B, C.I. 42660), can be removed from water by in situ hybridization with CaCO₃, BaSO₄ and Ca₃(PO₄)₂ and the resulting hybrids thus prepared used as plastic colorants. All the hybrids can be processed into polypropylene (PP) at 200 °C with good color intensity, color brightness and homogeneous dispersion. The BaSO₄-MB hybrid exhibits better migration resistance to acid and alkali, and stronger covering power than the BaSO₄-MB mixture. The thermal stability and UV resistance of the Ca₃(PO₄)₂-ABB6B hybrid are better than those of the Ca₃(PO₄)₂-ABB6B mixture. The crystallinity of PP is enhanced by incorporation of these hybrids and the use of these hybrids as colorants in PP instead of the dyes alone is determined to be feasible.

Formation of shaped barium sulfate-dye hybrids: waste dye utilization for eco-friendly treatment of wastewater

PURPOSE

Owing to the present complexity and difficulty of concentrated dye wastewater treatment, this work aimed to synthesize a reproducible waste-sorbing material for the treatment of wastewater by forming the dye-conjugating complex hybrid.

METHODS

The inorganic/organic hybridization was applied to prepare the objective material by immobilizing waster dye-Mordant blue 9 (MB) with barium sulfate (BaSO4). The composition and pattern of the formed material were determined by spectrometry and characterized by SEM and XRD, and their formation process was clarified. The adsorption of cationic dye-basic blue BO (BB) and copper ion was investigated.

RESULTS

The hybrid of MB alone into growing BaSO4 formed the pineapple-like particles while that of the MB/BB-conjugating complex was the rhombus material. The adsorption of BB on the MB-BaSO4 hybrid was probably attributed to ion-pair equilibrium and that of Cu2+ may result from the complexation. The treatment of dye and heavy metal wastewaters indicated that the MB hybrid material removed 99.8% BB and 97% Cu2+ and the dye-conjugating hybrid with growing BaSO4 100% MB, 99.5% BB, and 44% Cu2+.

CONCLUSION

The waste MB-BaSO4 hybrid material is efficient to treat cationic dye and Cu2+ wastewater. The dye-conjugating hybridization method is the first to be advanced for in situ wastewater treatment, and it showed a combined effect for the removal of both organic dyes and heavy metals.