Polymer Nanoparticles for Preferential Delivery of Drugs Only by Exploiting the Slightly Elevated Temperature of Cancer Cells and Real-Time Monitoring of Drug Release

Rapid proliferation and a faster rate of glycolysis in cancer cells often result in an elevated local temperature (40-43 °C) at the tumor site. Nanoparticles prepared from polymers with two lower critical solution temperatures (LCSTs) can be utilized to take advantage of this subtle temperature elevation to deliver anticancer drugs preferably to the cancer cells, thereby enhancing the overall therapeutic efficacy and reducing side effects. In this direction, we synthesized N-vinyl-2-pyrrolidone (NVP) and substituted NVP (sub-NVP: C2-NVP, C4-NVP)-based polymers with precisely controlled LCSTs by varying the ratio of NVP and sub-NVP. The first LCST (LCST1) was kept below 37 °C to promote self-assembly, drug loading, and structural stability in physiological conditions and the second LCST (LCST2) was in the range of 40-43 °C to ensure mild hyperthermia-induced drug release. Additionally, covalent attachment of tetraphenylethylene (TPE, AIEgen) resulted in aggregation-induced emission in thermoresponsive micellar nanoparticles in which TPE acted as a Förster Resonance Energy Transfer (FRET) pair with the loaded anticancer drug doxorubicin (DOX). Tracking of FRET-induced fluorescence recovery of TPE molecules was utilized to confirm the real-time thermoresponsive release of DOX from nanoparticles and eventual localization of TPE in the cytoplasm and DOX in the nucleus. In vitro cellular studies such as cytotoxicity, cellular uptake, and thermoresponsive drug release showed that the DOX-loaded polymeric nanoparticles were nontoxic to normal cells (HEK-293) but significantly more effective in cancer cells (MCF-7) at 40 °C. To our knowledge, this is the first report of preferential delivery of anticancer drugs only by exploiting the slightly elevated temperature of cancer cells.

H2 O ⋅ B(C6 F5 )3 -Catalyzed para-Alkylation of Anilines with Alkenes Applied to Late-Stage Functionalization of Non-Steroidal Anti-Inflammatory Drugs

Anilines are core motifs in a variety of important molecules including medicines, materials and agrochemicals. We report a straightforward procedure that allows access to new chemical space of anilines via their para-C-H alkylation. The method utilizes commercially available catalytic H2 O ⋅ B(C6 F5 )3 and is highly selective for para-C-alkylation (over N-alkylation and ortho-C-alkylation) of anilines, with a wide scope in both the aniline substrates and alkene coupling partners. Readily available alkenes are used, and include new classes of alkene for the first time. The mild reaction conditions have allowed the procedure to be applied to the late-stage-functionalization of non-steroidal anti-inflammatory drugs (NSAIDs), including fenamic acids and diclofenac. The formed novel NSAID derivatives display improved anti-inflammatory properties over the parent NSAID structure.

Colloidal ruthenium catalysts for selective quinaldine hydrogenation: Ligand and solvent effects

Colloidal Ru nanoparticles (NP) display interesting catalytic properties for the hydrogenation of (hetero)arenes as they proceed efficiently in mild reaction conditions. In this work, a series of Ru based materials was used in order to selectively hydrogenate quinaldine and assess the impact of the stabilizing agent on their catalytic performances. Ru nanoparticles stabilized with polyvinylpyrrolidone (PVP) and 1-adamantanecarboxylic acid (AdCOOH) allowed to obtain 5,6,7,8-tetrahydroquinaldine with a remarkable selectivity in mild reaction conditions by choosing the suitable solvent. The presence of a carboxylate ligand on the surface of the Ru NP led to an increase in the activity when compared to Ru/PVP catalyst. The stabilizing agent had also an impact on the selectivity, as carboxylate ligand modified catalysts promoted the selectivity towards 1,2,3,4-tetrahydroquinaldine, with bulky carboxylate displaying the highest ones.

How the Physicochemical Properties of Manufactured Nanomaterials Affect Their Performance in Dispersion and Their Applications in Biomedicine: A Review

The growth in novel synthesis methods and in the range of possible applications has led to the development of a large variety of manufactured nanomaterials (MNMs), which can, in principle, come into close contact with humans and be dispersed in the environment. The nanomaterials interact with the surrounding environment, this being either the proteins and/or cells in a biological medium or the matrix constituent in a dispersion or composite, and an interface is formed whose properties depend on the physicochemical interactions and on colloidal forces. The development of predictive relationships between the characteristics of individual MNMs and their potential practical use critically depends on how the key parameters of MNMs, such as the size, shape, surface chemistry, surface charge, surface coating, etc., affect the behavior in a test medium. This relationship between the biophysicochemical properties of the MNMs and their practical use is defined as their functionality; understanding this relationship is very important for the safe use of these nanomaterials. In this mini review, we attempt to identify the key parameters of nanomaterials and establish a relationship between these and the main MNM functionalities, which would play an important role in the safe design of MNMs; thus, reducing the possible health and environmental risks early on in the innovation process, when the functionality of a nanomaterial and its toxicity/safety will be taken into account in an integrated way. This review aims to contribute to a decision tree strategy for the optimum design of safe nanomaterials, by going beyond the compromise between functionality and safety.

Synthesis of PNVP-Based Copolymers with Tunable Thermosensitivity by Sequential Reversible Addition⁻Fragmentation Chain Transfer Copolymerization and Ring-Opening Polymerization

Through the reversible addition⁻fragmentation chain transfer (RAFT) copolymerization of 3-ethyl-1-vinyl-2-pyrrolidone (C₂NVP) and N-vinylpyrrolidone (NVP), a series of well-defined P(C₂NVP-co-NVP) copolymers were synthesized (Mn = ca. 8000 to 16,000 and Mw/Mn <1.5) by using a difunctional chain transfer agent, S-(1-methyl-4-hydroxyethyl acetate) O-ethyl xanthate (MHEX). Copolymerizing kinetics and different monomer ratio in feeds were conducted to study the apparent monomer reaction rate and reactivity ratios of NVP and C₂NVP, which indicated similar reaction rates and predominantly ideal random copolymers for the two monomers. The Tgs of the obtaining P(C₂NVP-co-NVP) copolymers significantly corresponded to not only molecular weights MWs but also copolymer compositions. These copolymers presented characteristic lower critical solution temperatures (LCST) behavior. We then studied the cloud points (CPs) of the copolymers with varying MWs and compositions. With different MWs, the CPs were linearly decreased from ca. 51 to 45 °C. With different compositions, the CPs of the copolymers decreased from ca. 48 to 29 °C with C₂NVP content (i.e., from 60.8 to 89.9 mol %). Fitting the CPs by the theoretical equation, the result illustrated that the introduction of more hydrophobic units of C₂NVP suppressed the hydrophilic interaction between the polymer chain and water. We then successfully proceeded the chain extension through the ring-opening polymerization (ROP) of ε-caprolactone (CL) to the synthesis of a novel P(C₂NVP-co-NVP)-b-PCL amphiphilic block copolymer (Mn,NMR = 14,730 and Mw/Mn = 1.59). The critical micelle concentration (CMC) of the block copolymer had a value of ca. 1.46 × 10-4 g/L. The block copolymer micelle was traced by dynamic light scattering (DLS), obtaining thermosensitive behaviors with a particle size of ca. 240 nm at 25 °C and ca. 140 nm at 55 °C, respectively.

Effect of the Polymeric Stabilizer in the Aqueous Phase Fischer-Tropsch Synthesis Catalyzed by Colloidal Cobalt Nanocatalysts

A series of small and well defined cobalt nanoparticles were synthesized by the chemical reduction of cobalt salts in water using NaBH4 as a reducing agent and using various polymeric stabilizers. The obtained nanocatalysts of similar mean diameters (ca. 2.6 nm) were fully characterized and tested in the aqueous phase Fischer-Tropsch Synthesis (AFTS). Interestingly, the nature and structure of the stabilizers used during the synthesis of the CoNPs affected the reduction degree of cobalt and the B-doping of these NPs and consequently, influenced the performance of these nanocatalysts in AFTS.

Smart block copolymers of PVP and an alkylated PVP derivative: synthesis, characterization, thermoresponsive behaviour and self-assembly

Stimuli responsive block copolymers of biocompatible poly(3-ethyl-N-vinylpyrrolidone) and poly(N-vinylpyrrolidone), i.e. EPVP–PVP, were readily synthesized via RAFT-mediated polymerization.

Selective hydrogenation of α-pinene to cis-pinane over Ru nanocatalysts in aqueous micellar nanoreactors

Hydrogenation of α-pinene took place in the lipophilic core between the metal and the hydrogen-containing micelles.

Rational control of nano-scale metal-catalysts for biomass conversion

This feature article discusses the rational control of nano-scale metal catalysts for catalytic biomass transformation.

Surface characterisation of phosphine and phosphite stabilised Rh nanoparticles: a model study

The surface characterisation of Rh nanoparticles stabilized by triphenylphosphine and triphenylphosphite shows differences that were correlated with distinct selectivities in catalytic styrene hydrogenation.

Thermoresponsive block copolymer micelles with tunable pyrrolidone-based polymer cores: structure/property correlations and application as drug carriers

Residue structure affects the physicochemical properties, drug loading efficiency, and thermoresponsive drug release profiles of block copolymer micelles with pyrrolidone-based polymer cores.

Effect of residue structure on the thermal and thermoresponsive properties of γ-substituted poly(N-acryloyl-2-pyrrolidones)

We discuss the results of an investigation into the structure/property correlations of γ-substituted poly(N-acryloyl-2-pyrrolidone)s, a recently reported class of pyrrolidone-based polymers prepared from pyroglutamic acid, a bio-derived resource.

In ovo delivery of Newcastle disease virus conjugated hybrid calcium phosphate nanoparticle and to study the cytokine profile induction

In this report, the hybrid calcium phosphate (CaP) nanoparticles were synthesized and functionalized with Newcastle disease virus (NDV). These nanoparticles were synthesized by a combination of co-precipitation and polymerization process and functionalized with amino propyl triethoxy silane before coupling to NDV. The 5-dimethylthiazol-2-yl-2, 5-diphenyltetrazolium bromide (MTT) assay of chicken spleen cells incubated with these nanoparticles indicated that, these particles did not exert any significant cytotoxicity. The effects of hybrid CaP nanoparticles on cell cycle were assayed using a flow cytometer. The results demonstrated that the cell viability and proliferation capacity of spleen cells were not affected by hybrid CaP nanoparticles compared with their control cells. The hybrid CaP nanoparticles were characterized by scanning/transmission electron microscopy (SEM/TEM); Fourier transformed infrared spectroscopy (FTIR), X-ray diffraction patterns (XRD), Raman spectroscopy and energy-dispersive X-ray spectroscopy (EDX). These methods revealed that NDV was successfully conjugated on nanoparticles. The ability of the hybrid CaP nanoparticles to induce different cytokine mRNAs in the spleen cells of 18-day old embryonated chicken eggs (ECEs) was studied by quantitative real time polymerase chain reaction (qRT-PCR). NDV conjugated particles induced a high expression of Th1 cytokines such as interferon (IFN)-α, tumor necrosis factor (TNF)-α of and Th2 cytokines, interleukin (IL) 6 and IL-10. Uncoupled NDV induced only Th1 cytokines, IFN-α, INF-γ and TNF-α. The hybrid particles alone did not induce any cytokines. This confirmed that nanoparticle coupling could induce differential cytokine profiles and hence can be used as an alternate strategy to direct favorable immune responses in animals or chickens using appropriate vaccination carrier.

Mesoporous poly-melamine-formaldehyde stabilized palladium nanoparticle (Pd@mPMF) catalyzed mono and double carbonylation of aryl halides with amines

A new mesoporous polymer stabilized Pd nano (mPMF–Pd⁰) has been synthesized and well characterized. The catalytic performance of this complex has been tested for mono and double carbonylation of aryl halides with amines.

Nanometallic chemistry: deciphering nanoparticle catalysis from the perspective of organometallic chemistry and homogeneous catalysis

Nanoparticle (NP) catalysis is traditionally viewed as a sub-section of heterogeneous catalysis. However, certain properties of NP catalysts, especially NPs dispersed in solvents, indicate that there could be benefits from viewing them from the perspective of homogeneous catalysis. By applying the fundamental approaches and concepts routinely used in homogeneous catalysis to NP catalysts it should be possible to rationally design new nanocatalysts with superior properties to those currently in use.

Transformation of sodium bicarbonate and CO2 into sodium formate over NiPd nanoparticle catalyst

The present research systematically investigated, for the first time, the transformation of sodium bicarbonate and CO₂ into sodium formate over a series of Ni based metal nanoparticles (NPs). Ni NPs and eight NiM (M stands for a second metal) NPs were prepared by a facile wet chemical process and then their catalytic performance were evaluated in sodium bicarbonate hydrogenation. Bimetallic NiPd NPs with a composition of 7:3 were found to be superior for this reaction, which are more active than both pure Ni and Pd NPs. Hot filtration experiment suggested the NPs to be the truly catalytic active species and kinetic analysis indicated the reaction mechanism to be different than most homogeneous catalysts. The enhanced activity of the bimetallic nanoparticles may be attributed to their smaller size and improved stability.