Phosphine-mediated one-pot thiol-ene "click" approach to polymer-protein conjugates

Protein click chemistry and its potential for medical applications

A revolution in chemical biology occurred with the introduction of click chemistry. Click chemistry plays an important role in protein chemistry modifications, providing specific, sensitive, rapid, and easy-to-handle methods. Under physiological conditions, click chemistry often overlaps with bioorthogonal chemistry, defined as reactions that occur rapidly and selectively without interfering with biological processes. Click chemistry is used for the posttranslational modification of proteins based on covalent bond formations. With the contribution of click reactions, selective modification of proteins would be developed, representing an alternative to other technologies in preparing new proteins or enzymes for studying specific protein functions in different biological processes. Click-modified proteins have potential in diverse applications such as imaging, labeling, sensing, drug design, and enzyme technology. Due to the promising role of proteins in disease diagnosis and therapy, this review aims to highlight the growing applications of click strategies in protein chemistry over the last two decades, with a special emphasis on medicinal applications.

Construction of Active Protein Materials: Manipulation on Morphology of Salmon Calcitonin Assemblies with Enhanced Bone Regeneration Effect

The effect of protein drugs is always limited by their relatively low stability and fast degradation property; thus, various elegant efforts have been made to improve the bioactivity and biocompatibility of the protein drugs. Here, an alternative way is proposed to solve this problem. By simply adding a limited amount of small-molecular regulator, which tunes the subtle balance of protein-protein interactions (PPIs) and disulfide bond formation, the self-assembly property of the protein drug can be regulated, forming an "active protein material" itself. This means that, the resulting biomaterial is dominated by the protein drug and water, with significantly enhanced bone regeneration effect compared to the virgin protein in vitro and in vivo, through multivalent effect between the protein and receptor and the retarded degradation of the assembled proteins. In this active protein material, the protein drug is not only the active drug, but also the drug carrier, which greatly increases the drug-loading efficiency of the biomaterial, indicating the advantages of the easy preparation, high efficiency, and low cost of the active protein material with a bright future in biomedical applications.

Benchmarking of Cph1 Mutants and DrBphP for Light-Responsive Phytochrome-Based Hydrogels with Reversibly Adjustable Mechanical Properties

In the rapidly expanding field of molecular optogenetics, the performance of the engineered systems relies on the switching properties of the underlying genetically encoded photoreceptors. In this study, the bacterial phytochromes Cph1 and DrBphP are engineered, recombinantly produced in Escherichia coli, and characterized regarding their switching properties in order to synthesize biohybrid hydrogels with increased light-responsive stiffness modulations. The R472A mutant of the cyanobacterial phytochrome 1 (Cph1) is identified to confer the phytochrome-based hydrogels with an increased dynamic range for the storage modulus but a different light-response for the loss modulus compared to the original Cph1-based hydrogel. Stiffness measurements of human atrial fibroblasts grown on these hydrogels suggest that differences in the loss modulus at comparable changes in the storage modulus affect cell stiffness and thus underline the importance of matrix viscoelasticity on cellular mechanotransduction. The hydrogels presented here are of interest for analyzing how mammalian cells respond to dynamic viscoelastic cues. Moreover, the Cph1-R472A mutant, as well as the benchmarking of the other phytochrome variants, are expected to foster the development and performance of future optogenetic systems.

Synthesis of surface protein-imprinted nanoparticles based on metal coordination and anchored carbon dots for enhanced fluorescence detection

Molecularly imprinted polymers endowed with photo-luminescent properties have attracted wide research interest in many fields such as biological analysis and diseases diagnosis. Herein, we illustrate a versatile method for the construction of surface protein-imprinted nanoparticles based on metal coordination and anchored carbon dots (CDs) for enhanced fluorescence detection of the target protein. As the fluorescent nanosupports for surface imprinting, CDs-attached SiO₂ nanoparticles were synthesized via thiol-ene click chemistry. With histidine (His)-exposed protein as templates, imprinted nanoshells were formed over the nanosupports via copolymerization of a Cu²⁺-chelating monomer and an oligo (ethylene glycol) monomer, hence producing high-quality imprinted cavities because of both the relatively strong coordination and inhibited non-specific binding. Using lysozyme as a model His-exposed template, the imprinted nanoparticles showed fluorescence enhancement while binding the target protein, and exhibited significantly increased specific fluorescence response than the controls without the metal coordination. They achieved a high imprinting factor of 5.8 and a low limit of detection of 10.1 nM. Furthermore, such sensors were applied to determine lysozyme in diluted chicken egg-white samples with satisfactory recoveries at three spiking levels ranging from 97.9 to 101.4%. Human serum albumin was also used as another template protein for preliminary confirming the generality of the presented strategy.

Reversible Shielding and Immobilization of Liposomes and Viral Vectors by Tailored Antibody-Ligand Interactions

Controlling the time and dose of nanoparticulate drug delivery by administration of small molecule drugs holds promise for efficient and safer therapies. This study describes a versatile approach of exploiting antibody-ligand interactions for the design of small molecule-responsive nanocarrier and nanocomposite systems. For this purpose, antibody fragments (scFvs) specific for two distinct small molecule ligands are designed. Subsequently, the surface of nanoparticles (liposomes or adeno-associated viral vectors, AAVs) is modified with these ligands, serving as anchor points for scFv binding. By modifying the scFvs with polymer tails, they can act as a non-covalently bound shielding layer, which is recruited to the anchor points on the nanoparticle surface and prevents interactions with cultured mammalian cells. Administration of an excess of the respective ligand triggers competitive displacement of the shielding layer from the nanoparticle surface and restores nanoparticle-cell interactions. The same principle is applied for developing hydrogel depots that can release integrated AAVs or liposomes in response to small molecule ligands. The liberated nanoparticles subsequently deliver their cargoes to cells. In summary, the utilization of different antibody-ligand interactions, different nanoparticles, and different release systems validates the versatility of the design concept described herein.

Decomplexation as a rate limitation in the thiol-Michael addition of N-acrylamides

The thiol-Michael addition is a popular, selective, high-yield "click" reaction utilized for applications ranging from small-molecule synthesis to polymer or surface modification. Here, we combined experimental and quantum mechanical modeling approaches using density functional theory (DFT) to examine the thiol-Michael reaction of N-allyl-N-acrylamide monomers used to prepare sequence-defined oligothioetheramides (oligoTEAs). Experimentally, the reaction was evaluated with two fluorous tagged thiols and several monomers at room temperature (22 °C and 40 °C). Using the Eyring equation, the activation energies (enthalpies) were calculated, observing a wide range of energy barriers ranging from 28 kJ mol-1 to 108 kJ mol-1 within the same alkene class. Computationally, DFT coupled with the Nudged Elastic Band method was used to calculate the entire reaction coordinate of each monomer reaction using the B97-D3 functional and a hybrid implicit-explicit methanol solvation approach. The thiol-Michael reaction is traditionally rate-limited by the propagation or chain-transfer steps. However, our test case with N-acrylamides and fluorous thiols revealed experimental and computational data produced satisfactory agreement only when we considered a previously unconsidered step that we termed "product decomplexation", which occurs as the product physically dissociates from other co-reactants after chain transfer. Five monomers were investigated to support this finding, capturing a range of functional groups varying in alkyl chain length (methyl to hexyl) and aromaticity (benzyl and ethylenephenyl). Increased substrate alkyl chain length increased activation energy, explained by the inductive effect. Aromatic ring-stacking configurations significantly impacted the activation energy and contributed to improved molecular packing density. Hydrogen-bonding between reactants increased the activation energy emphasizing the rate-limitation of the product decomplexation. Our findings begin to describe a new structure-kinetic relationship for thiol-Michael acceptors to enable further design of reactive monomers for synthetic polymers and biomaterials.

Bifunctional Peptide-Polymer Conjugate-Based Fibers via a One-Pot Tandem Disulfide Reduction Coupled to a Thio-Bromo "Click" Reaction

In view of the potential applications of fibers in material sciences and biomedicine, an effective synthetic strategy is described to construct peptide-based bifunctional polymeric conjugates for supramolecular self-association in solution. A direct coupling method of an α-acyl-brominated peptide Phe-Phe-Phe-Phe (FFFF) with a disulfide-bridged polymeric scaffold of poly(ethylene glycol) (PEG) (M n,GPC = 8700 g mol-1, Đ = 2.02) is reported to readily prepare the bi-headed conjugate FFFF-PEG-FFFF (M n,GPC = 3800 g mol-1, Đ = 1.10) via a one-pot, tandem disulfide reduction (based on tris(2-carboxyethyl)phosphine hydrochloride (TCEP)) coupled to a thio-bromo "click" reaction. The conjugate was investigated via transmission electron microscopy to exploit supramolecular fibril formation and solvent-dependent structuring into macroscale fibers via fibril-fibril interactions and interfibril cross-linking-induced bundling. Circular dichroism spectroscopic analysis is further performed to investigate β-sheet motifs in such fibrous scaffolds. Overall, this synthetic approach opens an attractive approach for a simplified synthesis of PEG-containing peptide conjugates.

Facile Synthesis of a 3,4-Ethylene-Dioxythiophene (EDOT) Derivative for Ease of Bio-Functionalization of the Conducting Polymer PEDOT

In the pursuit of conducting polymer based bio-functional devices, a cost-effective and high yield synthesis method for a versatile monomer is desired. We report here a new synthesis strategy for a versatile monomer 2-methylene-2,3-dihydrothieno (3,4-b) (1,4) dioxine, or 3,4-ethylenedioxythiophene with a exomethylene side group (EDOT-EM). Compared to the previously reported synthesis route, the new strategy uses less steps, with faster reaction rate, and higher yield. The presence of EM group opens up endless possibility for derivatization via either hydro-alkoxy addition or thiol-ene click chemistry. EDOT-EM could be polymerized into stable and low impedance PEDOT-EM polymer using electro-polymerization method on different conducting substrates at both macro and micro scales. Facile post-functionalization of PEDOT-EM with molecules of varying size and functionality (from small molecules to DNAs and proteins) was achieved. The new synthetic route of EDOT-EM and the ease of post-functionalization of PEDOT-EM will greatly accelerate the use of conducting polymer in a broad range of organic electronics and bioelectronics applications.

Surface modification of model hydrogel contact lenses with hyaluronic acid via thiol-ene "click" chemistry for enhancing surface characteristics

Discontinuation of contact lens wear as a result of ocular dryness and discomfort is extremely common; as many as 26% of contact lens wearers discontinue use within the first year. While patients are generally satisfied with conventional hydrogel lenses, improving on-eye comfort continues to remain a goal. Surface modification with a biomimetic, ocular friendly hydrophilic layer of a wetting agent is hypothesized to improve the interfacial interactions of the contact lens with the ocular surface. In this work, the synthesis and characterization of poly(2-hydroxyethyl methacrylate) surfaces grafted with a hydrophilic layer of hyaluronic acid are described. The immobilization reaction involved the covalent attachment of thiolated hyaluronic acid (20 kDa) on acrylated poly(2-hydroxyethyl methacrylate) via nucleophile-initiated Michael addition thiol-ene "click" chemistry. The surface chemistry of the modified surfaces was analyzed by Fourier transform infrared spectroscopy-attenuated total reflectance and X-ray photoelectron spectroscopy. The appearance of N (1s) and S (2p) peaks on the low resolution X-ray photoelectron spectroscopy spectra confirmed successful immobilization of hyaluronic acid. Grafting hyaluronic acid to the poly(2-hydroxyethyl methacrylate) surfaces decreased the contact angle, the dehydration rate, and the amount of nonspecific sorption of lysozyme and albumin in comparison to pristine hydrogel materials, suggesting the development of more wettable surfaces with improved water-retentive and antifouling properties, while maintaining optical transparency (>92%). In vitro testing also showed excellent viability of human corneal epithelial cells with the hyaluronic acid-grafted poly(2-hydroxyethyl methacrylate) surfaces. Hence, surface modification with hyaluronic acid via thiol-ene "click" chemistry could be useful in improving contact lens surface properties, potentially alleviating symptoms of contact lens related dryness and discomfort during wear.

Adequate Reducing Conditions Enable Conjugation of Oxidized Peptides to Polymers by One-Pot Thiol Click Chemistry

Thiol(-click) chemistry has been extensively investigated to conjugate (bio)molecules to polymers. Handling of cysteine-containing molecules may however be cumbersome, especially in the case of fast-oxidizing coiled-coil-forming peptides. In the present study, we investigated the practicality of a one-pot process to concomitantly reduce and conjugate an oxidized peptide to a polymer. Three thiol-based conjugation chemistries (vinyl sulfone (VS), maleimide, and pyridyldithiol) were assayed along with three reducing agents (tris(2-carboxyethyl)phosphine (TCEP), dithiothreitol, and β-mercaptoethanol). Seven out of the nine possible combinations significantly enhanced the conjugation yield, provided that an adequate concentration of reductant was used. Among them, the coincubation of an oxidized peptide with TCEP and a VS-modified polymer displayed the highest level of conjugation. Our results also provide insights into two topics that currently lack consensus: TCEP is stable in 10 mM phosphate buffered saline and it reacts with thiol-alkylating agents at submillimolar concentrations, and thus should be carefully used in order to avoid interference with thiol-based conjugation reactions.

Bone-targeting parathyroid hormone conjugates outperform unmodified PTH in the anabolic treatment of osteoporosis in rats

Synthetic parathyroid hormone (PTH) is clinically indicated for the treatment of osteoporosis, through its anabolic effects on parathyroid hormone receptors (PTHRs), located on osteoblast cells. However, the bioavailability of PTH for bone cells is restricted by the short half-life of PTH and the widespread distribution of PTHRs in non-skeletal tissues. To impart affinity for mineralized bone surfaces, bisphosphonate (BP)-mediated PTH analogues were synthesized, characterized, and evaluated in vitro and in vivo. The successful synthesis of PTH-PEG-BP was identified on MALDI-ToF mass spectra; bone-targeting potential was evaluated by hydroxyapatite binding test; and receptor bioactivity was assessed in UMR-106 (rat osteosarcoma) cells that constitutively express PTHRs. Therapeutic efficacy was evaluated using ovariectomized rats that remained untreated for 8 weeks to allow development of osteopenia. Those rats then received daily subcutaneous injections of PTH-PEG-BP, thiol-BP vehicle, or unmodified PTH, and compared to sham-operated healthy rats at 0, 4, 8, 12, and 16 weeks. In vivo micro-CT was conducted on the proximal tibial metaphysis to measure microstructural bone parameters, and new bone formation was detected using dynamic labeling. Bone strength was assessed using three-point bending mechanical testing. Our study determined that PTH-PEG-BP conjugates significantly enhanced PTH targeting to the bone matrix while retaining full PTH bioactivity. Moreover, PTH-PEG-BP conjugates significantly increased trabecular bone quality, anabolic bone formation, and improved bone strength over systemically administered PTH alone. We highlight the promise of a novel class of bone-targeting anabolic compound for the treatment of osteoporosis and related bone disorders.

The effect of a crosslinking chemical reaction on pattern formation in viscous fingering of miscible fluids in a Hele-Shaw cell

Viscous fingering can occur in fluid motion whenever a high mobility fluid displaces a low mobility fluid in a Darcy type flow. When the mobility difference is primarily attributable to viscosity (e.g., flow between the two horizontal plates of a Hele-Shaw cell), viscous fingering (VF) occurs, which is sometimes termed the Saffman-Taylor instability. Alternatively, in the presence of differences in density in a gravity field, buoyancy-driven convection can occur. These instabilities have been studied for decades, in part because of their many applications in pollutant dispersal, ocean currents, enhanced petroleum recovery, and so on. More recent interest has emerged regarding the effects of chemical reactions on fingering instabilities. As chemical reactions change the key flow parameters (densities, viscosities, and concentrations), they may have either a destabilizing or stabilizing effect on the flow. Hence, new flow patterns can emerge; moreover, one can then hope to gain some control over flow instabilities through reaction rates, flow rates, and reaction products. We report effects of chemical reactions on VF in a Hele-Shaw cell for a reactive step-growth cross-linking polymerization system. The cross-linked reaction product results in a non-monotonic viscosity profile at the interface, which affects flow stability. Furthermore, three-dimensional internal flows influence the long-term pattern that results.

One-Pot Multicomponent Synthesis of Glycopolymers through a Combination of Host-Guest Interaction, Thiol-ene, and Copper-Catalyzed Click Reaction in Water

There is a common phenomenon that the heterogeneity of natural oligosaccharides contains various sugar units, which can be used to enhance affinity and selectivity toward a specific receptor, so the synthesis of heterogeneous glycopolymers is always an important issue in the glycopolymer field. Herein, this study conducts a one-pot method to prepare polyrotaxane-based heteroglycopolymers anchored with different sugar units and fluorescent moieties via the combination of host-guest interaction, thiol-ene, and copper-catalyzed click chemistry in water. Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy, gel permeation chromatography, X-ray diffraction, and Ellman's assay test are used in the paper to characterize the compounds. Quartz crystal microbalance-dissipation (QCD-D) experiments and bacterial adhesion assay are utilized to study the interactions of polyrotaxane-based heteroglycopolymers with Con A and Escherichia coli. The results reveal that polyrotaxanes (PRs) with mannose and glucose present better specificity toward Con A and E. coli than PRs with glucose due to synergistic effects.

A novel route to prepare a multilayer system via the combination of interface-mediated catalytic chain transfer polymerization and thiol-ene click chemistry

Herein, we have designed a novel multilayer system composed of poly(methyl methacrylate) [poly(MMA)] brush, biotin, streptavidin and protein-A on a silicon substrate to attach onanti-immunoglobulin G (anti-IgG). poly(MMA) brush with vinyl end-group was first synthesized by the interface-mediated catalytic chain transfer polymerization. The brush was then modified with cysteamine molecules to generate the polymer chains with amine end-group via a thiol-ene click chemistry. The amine end-groups of poly(MMA) chains were also modified with biotin units to ensure selective connection points for streptavidin molecules. Finally, a multilayer system on the silicon substrate was formed by using streptavidin and protein-A molecules, respectively. This multilayer system was employed to attach anti-IgG molecules in a highly oriented manner and provide anti-IgG molecular functional configuration on the multilayer. High reproducibility of the amount of anti-IgG adsorption and homogeneous anti-IgG adsorption layer on the silicon surface could be provided by this multilayer system. The multilayer system with protein A may be opened the door for designing an efficient immunoassay protein chip.

Towards the next generation of biomedicines by site-selective conjugation

Bioconjugates represent an emerging class of medicines, which offer therapeutic opportunities overtaking those of the individual components. Many novel bioconjugates have been explored in order to address various emerging medical needs. The last decade has witnessed the exponential growth of new site-selective bioconjugation techniques, however very few methods have made the way into human clinical trials. Here we discuss various applications of site-selective conjugation in biomedicines, including half-life extension, antibody-drug conjugates, conjugate vaccines, bispecific antibodies and cell therapy. The review is intended to highlight both the progress and challenges, and identify a potential roadmap to address the gap.

Modification of drug delivery to improve antibiotic targeting to the stomach

The obstacles to the successful eradication of Helicobacter pylori infections include the presence of antibiotic-resistant bacteria and therapy requiring multiple drugs with complicated dosing schedules. Other obstacles include bacterial residence in an environment where high antibiotic concentrations are difficult to achieve. Biofilm production by the bacteria is an additional challenge to the effective treatment of this infection. Conventional oral formulations used in the treatment of this infection have a short gastric residence time, thus limiting the duration of exposure of drug to the bacteria. This review summarizes the current research in the development of gastroretentive formulations and the prospective future applications of this approach in the targeted delivery of drugs such as antibiotics to the stomach.

Stability Enhancing N-Terminal PEGylation of Oxytocin Exploiting Different Polymer Architectures and Conjugation Approaches

Oxytocin, a cyclic nine amino acid neurohypophyseal hormone therapeutic, is effectively used in the control of postpartum hemorrhaging (PPH) and is on the WHO List of Essential Medicines. However, oxytocin has limited shelf life stability in aqueous solutions, particularly at temperatures in excess of 25 °C and injectable aqueous oxytocin formulations require refrigeration (<8 °C). This is particularly problematic in the hot climates often found in many developing countries where daytime temperatures can exceed 40 °C and where reliable cold-chain storage is not always achievable. The purpose of this study was to develop N-terminal amine targeted PEGylation strategies utilizing both linear PEG and polyPEG "comb" polymers as an effective method for stabilizing solution formulations of this peptide for prolonged storage in the absence of efficient cold-chain storage. The conjugation chemistries investigated herein include irreversible amine targeted conjugation methods utilizing NHS ester and aldehyde reductive amination chemistry. Additionally, one reversible conjugation method using a Schiff base approach was explored to allow for the release of the native peptide, thus, ensuring that biological activity remains unaffected. The reversibility of this approach was investigated for the different polymer architectures, alongside a nonpolymer oxytocin analogue to monitor how pH can tune native peptide release. Elevated temperature degradation studies of the polymer conjugates were evaluated to assess the stability of the PEGylated analogues in comparison to the native peptide in aqueous formulations to mimic storage conditions in developing nations and regions where storage under appropriate conditions is challenging.

Immobilization of Cysteine-Tagged Proteins on Electrode Surfaces by Thiol-Ene Click Chemistry

Thiol-ene click chemistry can be exploited for the immobilization of cysteine-tagged dehydrogenases in an active form onto carbon electrodes (glassy carbon and carbon felt). The electrode surfaces have been first modified with vinylphenyl groups by electrochemical reduction of the corresponding diazonium salts generated in situ from 4-vinylaniline. The grafting process has been optimized in order to not hinder the electrochemical regeneration of NAD(+)/NADH cofactor and soluble mediators such as ferrocenedimethanol and [Cp*Rh(bpy)Cl](+). Having demonstrated the feasibility of thiol-ene click chemistry for attaching ferrocene moieties onto those carbon surfaces, the same approach was then applied to the immobilization of d-sorbitol dehydrogenases with cysteine tag. These proteins can be effectively immobilized (as pointed out by XPS), and the cysteine tag (either 1 or 2 cysteine moieties at the N terminus of the polypeptide chain) was proven to maintain the enzymatic activity of the dehydrogenase upon grafting. The bioelectrode was applied to electroenzymatic enantioselective reduction of d-fructose to d-sorbitol, as a case study.

Single-Molecule Encapsulation: A Straightforward Route to Highly Stable and Printable Enzymes

A mild, fast, and sequence-independent method for controlled enzyme immobilization is presented. This novel approach involves the encapsulation of single-enzyme molecules and the covalent attachment of these nanobiocatalysts onto surfaces. Fast and mild immobilization conditions, combined with low nonspecific adsorption on hydrophobic substrates, enables well-defined surface patterns via microcontact printing. The biohybrid materials show enhanced activity in organic solvents.

Polymerization of Ethylene Oxide, Propylene Oxide, and Other Alkylene Oxides: Synthesis, Novel Polymer Architectures, and Bioconjugation

The review summarizes current trends and developments in the polymerization of alkylene oxides in the last two decades since 1995, with a particular focus on the most important epoxide monomers ethylene oxide (EO), propylene oxide (PO), and butylene oxide (BO). Classical synthetic pathways, i.e., anionic polymerization, coordination polymerization, and cationic polymerization of epoxides (oxiranes), are briefly reviewed. The main focus of the review lies on more recent and in some cases metal-free methods for epoxide polymerization, i.e., the activated monomer strategy, the use of organocatalysts, such as N-heterocyclic carbenes (NHCs) and N-heterocyclic olefins (NHOs) as well as phosphazene bases. In addition, the commercially relevant double-metal cyanide (DMC) catalyst systems are discussed. Besides the synthetic progress, new types of multifunctional linear PEG (mf-PEG) and PPO structures accessible by copolymerization of EO or PO with functional epoxide comonomers are presented as well as complex branched, hyperbranched, and dendrimer like polyethers. Amphiphilic block copolymers based on PEO and PPO (Poloxamers and Pluronics) and advances in the area of PEGylation as the most important bioconjugation strategy are also summarized. With the ever growing toolbox for epoxide polymerization, a "polyether universe" may be envisaged that in its structural diversity parallels the immense variety of structural options available for polymers based on vinyl monomers with a purely carbon-based backbone.

Immobilized palladium(II) ion affinity chromatography for recovery of recombinant proteins with peptide tags containing histidine and cysteine

Fusion of peptide-based tags to recombinant proteins is currently one of the most used tools for protein production. Also, immobilized metal ion affinity chromatography (IMAC) has a huge application in protein purification, especially in research labs. The combination of expression systems of recombinant tagged proteins with this robust chromatographic system has become an efficient and rapid tool to produce milligram-range amounts of proteins. IMAC-Ni(II) columns have become the natural partners of 6xHis-tagged proteins. The Ni(II) ion is considered as the best compromise of selectivity and affinity for purification of a recombinant His-tagged protein. The palladium(II) ion is also able to bind to side chains of amino acids and form ternary complexes with iminodiacetic acid and free amino acids and other sulfur-containing molecules. In this work, we evaluated two different cysteine- and histidine-containing six amino acid tags linked to the N-terminal group of green fluorescent protein (GFP) and studied the adsorption and elution conditions using novel eluents. Both cysteine-containing tagged GFPs were able to bind to IMAC-Pd(II) matrices and eluted successfully using a low concentration of thiourea solution. The IMAC-Ni(II) system reaches less than 20% recovery of the cysteine-containing tagged GFP from a crude homogenate of recombinant Escherichia coli, meanwhile the IMAC-Pd(II) yields a recovery of 45% with a purification factor of 13.

Developments and recent advancements in the field of endogenous amino acid selective bond forming reactions for bioconjugation

Bioconjugation methodologies have proven to play a central enabling role in the recent development of biotherapeutics and chemical biology approaches. Recent endeavours in these fields shed light on unprecedented chemical challenges to attain bioselectivity, biocompatibility, and biostability required by modern applications. In this review the current developments in various techniques of selective bond forming reactions of proteins and peptides were highlighted. The utility of each endogenous amino acid-selective conjugation methodology in the fields of biology and protein science has been surveyed with emphasis on the most relevant among reported transformations; selectivity and practical use have been discussed.

Thiol click modification of cyclic disulfide containing biodegradable polyurethane urea elastomers

Although the thiol click reaction is an attractive tool for postpolymerization modification of thiolmers, thiol groups are easily oxidized, limiting the potential for covalent immobilization of bioactive molecules. In this study, a series of biodegradable polyurethane elastomers incorporating stable cyclic disulfide groups was developed and characterized. These poly(ester urethane)urea (PEUU-SS) polymers were based on polycaprolactone diol (PCL), oxidized dl-dithiothreitol (O-DTT), lysine diisocyanate (LDI), or butyl diisocyanate (BDI), with chain extension by putrescine. The ratio of O-DTT:PCL was altered to investigate different levels of potential functionalization. PEG acrylate was employed to study the mechanism and availability of both bulk and surface click modification of PEUU-SS polymers. All synthesized PEUU-SS polymers were elastic with breaking strengths of 38-45 MPa, while the PEUU-SS(LDI) polymers were more amorphous, possessing lower moduli and relatively small permanent deformations versus PEUU-SS(BDI) polymers. Variable bulk click modification of PEUU-SS(LDI) polymers was achieved by controlling the amount of reduction reagent, and rapid reaction rates occurred using a one-pot, two-step process. Likewise, surface click reaction could be carried out quickly under mild, aqueous conditions. Furthermore, a maleimide-modified affinity peptide (TPS) was successfully clicked on the surface of an electrospun PEUU-SS(BDI) fibrous sheet, which improved endothelial progenitor cell adhesion versus corresponding unmodified films. The cyclic disulfide containing biodegradable polyurethanes described provide an option for cardiovascular and other soft tissue regenerative medicine applications where a temporary, elastic scaffold with designed biofunctionality from a relatively simple click chemistry approach is desired.

Injectable Peptide Decorated Functional Nanofibrous Hollow Microspheres to Direct Stem Cell Differentiation and Tissue Regeneration

Injectable microspheres are attractive stem cell carriers for minimally invasive procedures. For tissue regeneration, the microspheres need to present the critical cues to properly direct stem cell differentiation. In natural extracellular matrix (ECM), growth factors (GFs) and collagen nanofibers provide critical chemical and physical cues. However, there have been no reported technologies that integrate synthetic nanofibers and GFs into injectable microspheres. In this study, we synthesized functional nanofibrous hollow microspheres (FNF-HMS), which can covalently bind GF-mimicking peptides. Two different GF-mimicking peptides, Transforming Growth Factor-β1 mimicking peptide Cytomodulin (CM) and Bone Morphogenetic Protein-2 mimicking peptide P24, were separately conjugated onto the FNF-HMS to induce distinct differentiation pathways of rabbit bone marrow-derived mesenchymal stem cells (BMSCs). While no existing biomaterials were reported to successfully deliver CM to induce chondrogenesis, the developed FNF-HMS were shown to effectively present CM to BMSCs and successfully induced their chondrogenesis for cartilage formation in both in vitro and in vivo studies. In addition, P24 was conjugated onto the newly developed FNF-HMS and was capable of retaining its bioactivity and inducing ectopic bone formation in nude mice. These results demonstrate that the novel FNF-HMS can effectively deliver GF-mimicking peptides to modulate stem cell fate and tissue regeneration.

Sequential Michael addition thiol–ene and radical-mediated thiol–ene reactions in one-pot produced sequence-ordered polymers

Sequential Michael addition-based thiol–ene and free radical mediated thiol–ene reactions for preparing sequence-ordered polymers are reported for the first time.

Novel triethylamine catalyzed S → O acetyl migration reaction to generate candidate thiols for construction of topological and functional sulfur-containing polymers

Various sulphur-containing monomers and polymer materials transformed from different epoxy compounds.

Acrylate-tethering drug carrier: covalently linking carrier to biological surface and application in the treatment of Helicobacter pylori infection

The development of carriers to sustain drugs at stomach surface is an attractive strategy to increase drug bioavailability locally and systematically. So far, the only reported carrier that can form a covalent bond with mucus, the thiolated carrier, relies on a reversible disulfide exchange reaction between thiols on the carrier and disulfide bridges on the mucus. Here we show the design and fabrication of a cellulose carrier with tethering acrylate groups (denoted here as clickable carrier) that, under a nontoxic condition, can efficiently react with thiols on biomaterials in situ through the thermodynamically driven and kinetically probable Michael thiol-ene click reaction. Here we show the attachments of the clickable carriers to a mucin protein, a surface of human laryngeal carcinoma cells, and a surface of a fresh porcine stomach. We also show that the required thiol moieties can be generated in situ by reducing existing cystine disulfide bridges with either the edible vitamin C or the relatively nontoxic tris(2-carboxyethyl) phosphine. Comparing to a control carrier, the clickable carrier can increase some drug concentrations in an ex vivo stomach tissue, and improve the Helicobacter pylori treatment in infected C57BL/6 mice.

Biosensors based on porous cellulose nanocrystal-poly(vinyl alcohol) scaffolds

Cellulose nanocrystals (CNCs), which offer a high aspect ratio, large specific surface area, and large number of reactive surface groups, are well suited for the facile immobilization of high density biological probes. We here report functional high surface area scaffolds based on cellulose nanocrystals (CNCs) and poly(vinyl alcohol) (PVA) and demonstrate that this platform is useful for fluorescence-based sensing schemes. Porous CNC/PVA nanocomposite films with a thickness of 25-70 nm were deposited on glass substrates by dip-coating with an aqueous mixture of the CNCs and PVA, and the porous nanostructure was fixated by heat treatment. In a subsequent step, a portion of the scaffold's hydroxyl surface groups was reacted with 2-(acryloxy)ethyl (3-isocyanato-4-methylphenyl)carbamate to permit the immobilization of thiolated fluorescein-substituted lysine, which was used as a first sensing motif, via nucleophile-based thiol-ene Michael addition. The resulting sensor films exhibit a nearly instantaneous and pronounced change of their fluorescence emission intensity in response to changes in pH. The approach was further extended to the detection of protease activity by immobilizing a Förster-type resonance energy transfer chromophore pair via a labile peptide sequence to the scaffold. This sensing scheme is based on the degradation of the protein linker in the presence of appropriate enzymes, which separate the chromophores and causes a turn-on of the originally quenched fluorescence. Using a standard benchtop spectrometer to monitor the increase in fluorescence intensity, trypsin was detected at a concentration of 250 μg/mL, i.e., in a concentration that is typical for abnormal proteolytic activity in wound fluids.

PEG-peptide conjugates

The remarkable diversity of the self-assembly behavior of PEG-peptides is reviewed, including self-assemblies formed by PEG-peptides with β-sheet and α-helical (coiled-coil) peptide sequences. The modes of self-assembly in solution and in the solid state are discussed. Additionally, applications in bionanotechnology and synthetic materials science are summarized.

Combining ring-opening metathesis polymerization and thiol-ene coupling chemistries: facile access to novel functional linear and nonlinear macromolecules

The aim of this article is to highlight recent examples in which two powerful synthetic tools, namely ring-opening metathesis polymerization (ROMP) and thiol-ene (including the thiol-Michael variant) click chemistry have been combined to facilitate the preparation of novel functional materials of varying topology.

“Click” reactions: a versatile toolbox for the synthesis of peptide-conjugates

Peptides that comprise the functional subunits of proteins have been conjugated to versatile materials (biomolecules, polymers, surfaces and nanoparticles) in an effort to modulate cell responses, specific binding affinity and/or self-assembly behavior.

Synthesis, characterization and biodistribution studies of (125)I-radioiodinated di-PEGylated bone targeting salmon calcitonin analogue in healthy rats

PURPOSE

The objective of this study was to prepare a bisphosphonate (BP) mediated bone targeting di-PEGylated salmon calcitonin analogue sCT-2(PEG-BP) as a novel bone targeting pharmaceutical.

METHODS

HPLC was used for isolation of sCT-2(PEG-BP) from the reaction mixture, followed by determination of possible PEGylation sites by trypsin digestion. Stability of the compound over time, bone mineral affinity using hydroxyapatite, and biodistribution in normal rats after radiolabeling of sCT-2(PEG-BP) or control sCT with (125)I was evaluated.

RESULTS

PEGylated sCT analogues were synthesized, and sCT-2(PEG-BP) was isolated by HPLC and confirmed by MALDI-TOF and ICP-MS. MALDI-TOF analysis of trypsinized fragments suggested Cys(1) (or Lys(11)) and Lys(18) to be the two PEGylation sites. Bone mineral affinity test showed sCT-2(PEG-BP) or (125)I-sCT-2(PEG-BP) exhibited significantly increased bone mineral affinity over sCT or (125)I-sCT, respectively. sCT-2(PEG-BP) remained stable for at least 1 month. In vivo biodistribution study showed significantly increased bone retention and prolonged plasma circulation time for sCT-2(PEG-BP) compared to the control sCT.

CONCLUSION

Those results support sCT-2(PEG-BP) as a promising new drug candidate for the treatment of resorptive and/or maladaptive bone conditions, such as Osteoporosis, Osteoarthritis, Rheumatoid Arthritis, Paget's disease and bone cancers.