Preferential segregation of gold at the symmetrical tilt grain boundaries of platinum: an atomic-scale quantitative understanding

Grain boundary (GB) segregation plays a pivotal role in maintaining and optimizing the remarkable catalytic or mechanical properties of nanocrystalline Pt by reducing the Gibbs free energy and thereby impeding structure degradation. The solute segregation behavior at the Pt GB, however, is not well understood at the atomic level. In this study, we employed first-principles calculations to elucidate the preferential segregation behavior of a single Au atom at the symmetrical tilt GB of Pt. For pure Pt, a linear relationship between the GB energy and excess volume is observed. Therefore, Au exhibits strong segregation tendencies towards GB to release excess energy and volume stored at the strained GB. Although the segregation energy is sensitive to various GB sites, it is interesting to note that the minimum one increases linearly with GB energy. This site-sensitivity of segregation energy can be attributed to mechanical, chemical, and interaction parts, which are quantitatively related to the atomic volume, coordination number, and average bond length, respectively. Finally, the interplay among different structural descriptors is revealed. These insights into the association between GB structures, segregation configuration and energy offers valuable atomic-scale quantitative insights into the segregation behavior of Au in Pt GBs, which holds significant implications for the design of Pt nanomaterials with enhanced thermal stability via GB engineering.

Effects of Zr dopants on properties of PtNi nanoparticles for ORR catalysis: A DFT modeling

Pt-based alloys, such as Pt3Ni, are among the best electrocatalysts for oxygen reduction reaction (ORR) in polymer electrolyte membrane fuel cells. Doping of PtNi alloys with Zr was shown to enhance the durability of the operating ORR catalysts. Rationalizing these observations is hindered by the absence of atomic-level data for these tri-metallic materials, even when not exposed to the fuel cell operation conditions. This study aims at understanding structure-property relations in Zr-doped PtNi nanoparticles as a key to their ORR function. In particular, we calculated, using a method based on density functional theory, the most stable chemical orderings of pristine and Zr-doped Pt3Ni particles containing over 400 atoms. We thus clarify (i) preferential location and charge states of Zr atoms in the Pt3Ni NPs; (ii) effect of doping Zr atoms on the stability of the Pt skin of the Pt3Ni NPs; (iii) charge redistribution induced by Zr dopants; (iv) layer-by-layer atomic ordering in the Pt3Ni/Zr NPs with the increasing Zr content; and (v) effect of Zr atoms on the adsorption energies of O and OH species as indicators of the ORR activity.

Fe3 C/Fe Decorated N-doped Carbon Derived from Tetrabutylammonium tetrachloroferrate Complex as Bifunctional Electrocatalysts for ORR, OER and Zn-Air Batteries in Alkaline Medium

The emergence of non-precious metal-based robust and economic bifunctional oxygen electrocatalysts for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is crucial for the rational design of commercial rechargeable Zn-air batteries (RZAB) with safe energy conversion and storage systems. Herein, a facile strategy to fabricate a cost-efficient, bifunctional oxygen electrocatalyst Fe3 C/Fe decorated N doped carbon (FeC-700, the catalyst prepared at carbinization temperature of 700 °C) with a unique structure has been developed by carbonization of a single source precursor, tetrabutylammonium tetrachloroferrate(III) complex. The ORR and OER activity revealed excellent performance (ΔE=0.77 V) of the FeC-700 electrocatalyst, comparable to commercial Pt/C and RuO2, respectively. The designed temperature-tuneable structure provided sufficiently accessible active sites for the continuous passage of electrons by shortening the mass transfer pathway, leading to extremely durable electrocatalysts with high ECSA and amazing charge transfer performance. Remarkably, the assembled Zn-air batteries with the FeC-700 catalyst as the bifunctional air electrode delivers gratifying charging-discharging ability with an impressive power density of 134 mW cm-2 with a long lifespan, demonstrating prodigious possibilities for practical application.

Rechargeable Zinc-Air Batteries: Advances, Challenges, and Prospects

Rechargeable zinc-air batteries (Re-ZABs) are one of the most promising next-generation batteries that can hold more energy while being cost-effective and safer than existing devices. Nevertheless, zinc dendrites, non-portability, and limited charge-discharge cycles have long been obstacles to the commercialization of Re-ZABs. Over the past 30 years, milestone breakthroughs have been made in technical indicators (safety, high energy density, and long battery life), battery components (air cathode, zinc anode, and gas diffusion layer), and battery configurations (flexibility and portability), however, a comprehensive review on advanced design strategies for Re-ZABs system from multiple angles is still lacking. This review underscores the progress and strategies proposed so far to pursuit the high-efficiency Re-ZABs system, including the aspects of rechargeability (from primary to rechargeable), air cathode (from unifunctional to bifunctional), zinc anode (from dendritic to stable), electrolytes (from aqueous to non-aqueous), battery configurations (from non-portable to portable), and industrialization progress (from laboratorial to practical). Critical appraisals of the advanced modification approaches (such as surface/interface modulation, nanoconfinement catalysis, defect electrochemistry, synergistic electrocatalysis, etc.) are highlighted for cost-effective flexible Re-ZABs with good sustainability and high energy density. Finally, insights are further rendered properly for the future research directions of advanced zinc-air batteries.

Symmetry-Induced Regulation of Pt Strain Derived from Pt3 Ga Intermetallic for Boosting Oxygen Reduction Reaction

Pt-based fuel cell catalysts with excellent activity and stability for proton-exchange membrane fuel cells (PEMFCs) have been developed through strain regulation in recent years. Herein, this work demonstrates that symmetry-induced strain regulation of Pt surface of PtGa intermetallic compounds can greatly enhance the catalytic performance of the oxygen reduction reaction (ORR). With the strain environment varies derived from the lattice mismatch of analogous PtGa core but different symmetry, the Pt surface of the PtGa alloy and the Pt3 Ga (Pm3 ¯ $\bar{3}$ m) precisely realize 0.58% and 2.7% compressive strain compared to the Pt3 Ga (P4/mmm). Experimental and theoretical results reveal that when the compressive stress of the Pt lattice increases, the desorption process of O* intermediates becomes accelerated, which is conducive to oxygen reduction. The Pt3 Ga (Pm3 ¯ $\bar{3}$ m) with high symmetry and compressive Pt surface exhibit the highest mass and specific activities of 2.18 A mgPt -1 and 5.36 mA cm-2 , respectively, which are more than one order of magnitude higher than those of commercial Pt/C catalysts. This work demonstrates that material symmetry can be used to precisely modulate Pt surface stress to enhance the ORR, as well as provide a distinct platform to investigate the relationship between Pt compressibility and catalytic activity.

Recent progress in the development of advanced support materials for electrocatalysis

Electrocatalytic materials are pivotal for clean chemical production and energy conversion in devices like electrolyzers and fuel cells. These materials usually consist of metallic nanoparticles which serve as active reaction sites, and support materials which provide high surface area, conductivity and stability. When designing novel electrocatalytic composites, the focus is often on the metallic sites, however, the significance of the support should not be overlooked. Carbon materials, valued for their conductivity and large surface area, are commonly used as support in benchmark electrocatalysts. However, using alternative support materials instead of carbon can be beneficial in certain cases. In this minireview, we summarize recent advancements and key directions in developing novel supports for electrocatalysis, encompassing both carbon and non-carbon materials.

Coupling Single-Atom Sites and Ordered Intermetallic PtM Nanoparticles for Efficient Catalysis in Fuel Cells

The design of an efficient catalytic system with low Pt loading and excellent stability for the acidic oxygen reduction reaction is still a challenge for the extensive application of proton-exchange membrane fuel cells. Here, a gas-phase ordered alloying strategy is proposed to construct an effective synergistic catalytic system that blends PtM intermetallic compounds (PtM IMC, M = Fe, Cu, and Ni) and dense isolated transition metal sites (M-N4 ) on nitrogen-doped carbon (NC). This strategy enables Pt nanoparticles and defects on the NC support to timely trap flowing metal salt without partial aggregation, which is attributed to the good diffusivity of gaseous transition metal salts with low boiling points. In particular, the resulting Pt1 Fe1 IMC cooperating with Fe-N4 sites achieves cooperative oxygen reduction with a half-wave potential up to 0.94 V and leads to a high mass activity of 0.51 A  mgPt -1 and only 23.5% decay after 30 k cycles, both of which exceed DOE 2025 targets. This strategy provides a method for reducing Pt loading in fuel cells by integrating Pt-based intermetallics and single transition metal sites to produce an efficient synergistic catalytic system.

Au@C/Pt core@shell/satellite supra-nanostructures: plasmonic antenna-reactor hybrid nanocatalysts

Integration of plasmonic nanoantennas with catalytically active reactors in deliberately designed hybrid supra-nanostructures creates a dual-functional materials platform, based upon which precise modulation of catalytic reaction kinetics becomes accomplishable through optical excitations of plasmon resonances. Here, we have developed a multistep synthetic approach that enables us to assemble colloidal Au@C/Pt core@shell/satellite supra-nanostructures, in which the Au core functions as a light-harvesting plasmonic nanoantenna, the Pt satellites act as catalytically active reactors, and the C shell serves as a nanoscale dielectric spacer separating the reactors from the antenna, respectively. By adjusting several synthetic parameters, the size of the Au core, the thickness of the C shell, and the surface coverage of Pt satellites can all be tuned independently. Choosing Pt-catalyzed cascade oxidation of 3,3',5,5'-tetramethylbenzidine in an aerobic aqueous environment as a model reaction, we have systematically studied the detailed kinetic features of the catalytic reactions both in the dark and under visible light illumination over a broad range of reaction conditions, which sheds light on the interplay between plasmonic and catalytic effects in these antenna-reactor nanohybrids. The plasmonic antenna effect can be effectively harnessed to kinetically modulate multiple crucial steps during the cascade reactions, benefiting from plasmon-enhanced interband electronic transitions in the Pt satellites and plasmon-enhanced intramolecular electronic excitations in chromogenic intermediate species. In addition to the plasmonic antenna effect, photothermal transduction derived from plasmonic excitations can also provide significant contributions to the kinetic enhancements under visible light illumination. The knowledge gained from this work serves as important guiding principles for rational design and structural optimization of plasmonic antenna-reactor hybrid nanomaterials, endowing us with enhanced capabilities to kinetically modulate targeted catalytic/photocatalytic molecule-transforming processes through light illumination.

Recent advances of bifunctional catalysts for zinc air batteries with stability considerations: from selecting materials to reconstruction

With the growing depletion of traditional fossil energy resources and ongoing enhanced awareness of environmental protection, research on electrochemical energy storage techniques like zinc-air batteries is receiving close attention. A significant amount of work on bifunctional catalysts is devoted to improving OER and ORR reaction performance to pave the way for the commercialization of new batteries. Although most traditional energy storage systems perform very well, their durability in practical applications is receiving less attention, with issues such as carbon corrosion, reconstruction during the OER process, and degradation, which can seriously impact long-term use. To be able to design bifunctional materials in a bottom-up approach, a summary of different kinds of carbon materials and transition metal-based materials will be of assistance in selecting a suitable and highly active catalyst from the extensive existing non-precious materials database. Also, the modulation of current carbon materials, aimed at increasing defects and vacancies in carbon and electron distribution in metal-N-C is introduced to attain improved ORR performance of porous materials with fast mass and air transfer. Finally, the reconstruction of catalysts is introduced. The review concludes with comprehensive recommendations for obtaining high-performance and highly-durable catalysts.

Facile synthesis of PEG-glycerol coated bimetallic FePt nanoparticle as highly efficient electrocatalyst for methanol oxidation

Direct methanol fuel cell (DMFC) has shown excellent growth as an alternative candidate for energy sources to substitute fossil fuels. However, developing cost-effective and highly durable catalysts with a facile synthesis method is still challenging. In this prospect, a facile strategy is used for the preparation of hydrophilic Fe-Pt nanoparticle catalyst via a polyethylene glycol-glycerol route to utilize the advantages of nanostructured surfaces. The synthesized electrocatalysts are characterized by XRD, XPS, TEM, EDS and FTIR to confirm their structure, morphology, composition, and surface functionalization. The performance of the catalysts towards methanol oxidation reaction (MOR) was investigated by cyclic voltammetry and chronoamperometry in both acidic and alkaline media. The Fe-Pt bimetallic catalyst exhibits better current density of 36.36 mA cm-2 in acidic medium than in alkali medium (12.52 mA cm-2). However, the high If/Ib ratio of 1.9 in alkali medium signifies better surface cleaning/regenerating capability of catalyst. Moreover, the catalyst possessed superior cyclic stability of ~ 80% in the alkaline electrolyte which is 1.6 times higher than in the acidic one. The better stability and poison tolerance capacity of catalyst in alkaline media is attributed to the OH- ions provided by the electrolyte which interact with the metal species to form M-(OH)x and reversibly release OH- and regenerate metal surface for further oxidation reactions. But synergism provided by Fe and Pt gives better activity in acidic electrolyte as Pt is favourable catalyst for dehydrogenation of methanol in acidic medium. This study will be useful for designing anodic electrocatalysts for MOR.

Engineering Unsymmetrically Coordinated Fe Sites via Heteroatom Pairs Synergetic Contribution for Efficient Oxygen Reduction

Single-atom Fe catalysts are considered as the promising catalysts for oxygen reduction reaction (ORR). However, the high electronegativity of the symmetrical coordination N atoms around Fe site generally results in too strong adsorption of *OOH intermediates on the active site, severely limiting the catalytic performance. Herein, a "heteroatom pair synergetic modulation" strategy is proposed to tailor the coordination environment and spin state of Fe sites, enabling breaking the shackles of unsuitable adsorption of intermediate products on the active centers toward a more efficient ORR pathway. The unsymmetrically Co and B heteroatomic coordinated Fe single sites supported on an N-doped carbon (Fe─B─Co/NC) catalyst perform excellent ORR activity with high half-wave potential (E1/2 ) of 0.891 V and a large kinetic current density (Jk ) of 60.6 mA cm-2 , which is several times better than those of commercial Pt/C catalysts. By virtue of in situ electrochemical impedance and synchrotron infrared spectroscopy, it is observed that the optimized Fe sites can effectively accelerate the evolution of O2 into the *O intermediate, overcoming the sluggish O─O bond cleavage of the *OOH intermediate, which is responsible for fast four-electron reaction kinetics.

Protection Against Absorption Passivation on Platinum by a Nitrogen-Doped Carbon Shell for Enhanced Oxygen Reduction Reaction

In polymer electrolyte type fuel cells, the platinum-based catalysts are applied for the oxygen reduction reaction. However, the specific adsorption from the sulfo group in perfluorosulfonic acid ionomers has been considered to passivate the active sites of the platinum. Herein, we present platinum catalysts covered by an ultrathin two-dimensional nitrogen-doped carbon shell (CN_x) layer to protect the platinum from the specific adsorption of perfluorosulfonic acid ionomers. Such coated catalysts were obtained by the facile polydopamine coating method, which is available to tune the thickness of the carbon shell by tuning the polymerization time. The coated catalysts that possess a CN_x with a thickness of 1.5 nm demonstrated superior ORR activity and comparable oxygen diffusivity when compared to the commercial Pt/C. These results were supported by the changes in the electronic statements observed in the X-ray photoelectron spectroscopy (XPS) and CO stripping analyses. Furthermore, the oxygen coverage, CO displacement charge, and operando X-ray absorption spectroscopy (XAS) tests were employed to identify the protection effect of CN_x in coated catalysts compared with the Pt/C catalysts. In summary, the CN_x could not only suppress the oxide species generation but also prevent the specific adsorption of the sulfo group in the ionomer.

Progress and Perspective for In Situ Studies of Oxygen Reduction Reaction in Proton Exchange Membrane Fuel Cells

Proton exchange membrane fuel cell (PEMFC) is one of the most promising energy conversion devices with high efficiency and zero emission. However, oxygen reduction reaction (ORR) at the cathode is still the dominant limiting factor for the practical development of PEMFC due to its sluggish kinetics and the vulnerability of ORR catalysts under harsh operating conditions. Thus, the development of high-performance ORR catalysts is essential and requires a better understanding of the underlying ORR mechanism and the failure mechanisms of ORR catalysts with in situ characterization techniques. This review starts with the introduction of in situ techniques that have been used in the research of the ORR processes, including the principle of the techniques, the design of the in situ cells, and the application of the techniques. Then the in situ studies of the ORR mechanism as well as the failure mechanisms of ORR catalysts in terms of Pt nanoparticle degradation, Pt oxidation, and poisoning by air contaminants are elaborated. Furthermore, the development of high-performance ORR catalysts with high activity, anti-oxidation ability, and toxic-resistance guided by the aforementioned mechanisms and other in situ studies are outlined. Finally, the prospects and challenges for in situ studies of ORR in the future are proposed.

A universal synthesis of ultrathin Pd-based nanorings for efficient ethanol electrooxidation

Metallic nanorings (NRs) with open hollow structures are of particular interest in energy-related catalysis due to their unique features, which include the high utilization of active sites and facile accessibility for reactants. However, there is still a lack of general methods for synthesizing Pd-based multimetallic NRs with a high catalytic performance. Herein, we develop a template-directed strategy for the synthesis of ultrathin PdM (M = Bi, Sb, Pb, BiPb) NRs with a tunable size. Specifically, ultrathin Pd nanosheets (NSs) are used as a template to steer the deposition of M atoms and the interatomic diffusion between Pd and M, subsequently resulting in the hollow structured NRs. Taking the ethanol oxidation reaction (EOR) as a proof-of-concept application, the PdBi NRs deliver a substantially improved activity relative to the Pd NSs and commercial Pd/C catalysts, simultaneously showing outstanding stability and CO tolerance. Mechanistically, density functional theory (DFT) calculations disclose that the incorporation of Bi reduces the energy barrier of the rate-determining step in the EOR C₂-path, which, together with the high ratio of exposed active sites, endows the PdBi NRs with an excellent EOR activity. We believe that our work can illuminate the general synthesis of multimetallic NRs and the rational design of advanced electrocatalysts.

Carbon-Based Electrocatalysts for Acidic Oxygen Reduction Reaction

Oxygen reduction reaction (ORR) is vital for clean and renewable energy technologies, which require no fossil fuel but catalysts. Platinum (Pt) is the best-known catalyst for ORR. However, its high cost and scarcity have severely hindered renewable energy devices (e.g., fuel cells) for large-scale applications. Recent breakthroughs in carbon-based metal-free electrochemical catalysts (C-MFECs) show great potential for earth-abundant carbon materials as low-cost metal-free electrocatalysts towards ORR in acidic media. This article provides a focused, but critical review on C-MFECs for ORR in acidic media with an emphasis on advances in the structure design and synthesis, fundamental understanding of the structure-property relationship and electrocatalytic mechanisms, and their applications in proton exchange membrane fuel cells. Current challenges and future perspectives in this emerging field are also discussed.

In situ reduction of gold nanoparticles-decorated MXenes-based electrochemical sensing platform for KRAS gene detection

In this work, gold nanoparticles@Ti3C2 MXenes nanocomposites with excellent properties were combined with toehold-mediated DNA strand displacement reaction to construct an electrochemical circulating tumor DNA biosensor. The gold nanoparticles were synthesized in situ on the surface of Ti3C2 MXenes as a reducing and stabilizing agent. The good electrical conductivity of the gold nanoparticles@Ti3C2 MXenes composite and the nucleic acid amplification strategy of enzyme-free toehold-mediated DNA strand displacement reaction can be used to efficiently and specifically detect the non-small cell cancer biomarker circulating tumor DNA KRAS gene. The biosensor has a linear detection range of 10 fM −10 nM and a detection limit of 0.38 fM, and also efficiently distinguishes single base mismatched DNA sequences. The biosensor has been successfully used for the sensitive detection of KRAS gene G12D, which has excellent potential for clinical analysis and provides a new idea for the preparation of novel MXenes-based two-dimensional composites and their application in electrochemical DNA biosensors.

Exploration of the oxygen reduction reaction activity of four transition metal borates: synthesis, structure and characterization

Four new transition metal borates, [Co(1-MI)₂]·B₅O₇(OH)₃ (1, 1-MI = 1-methylimidazole), Co₂(PZ)₈(SO₄)₂·2H₃BO₃ (2, PZ = pyrazole), K₇{(BO₃)Co[B₁₂O₁₈(OH)₆]}·H₂O (3) and K₂{[Ni(PY)₂]₂·[(C₄H₂O₆)₂B]}₂ (4, PY = pyridine), have been successfully synthesized by a mild method. Their structures were determined by X-ray single crystal diffraction. These compounds were further characterized by FTIR, PXRD and UV-vis-NIR. It is worth noting that the catalytic properties of catalysts based on these four borates were explored, and that organically templated borate 1- and 2-based catalysts showed better ORR catalytic performance compared to 3- and 4-based catalysts. This may be caused by the supramolecular skeletons of 1 and 2 providing sufficient space and porosity.

Metal-organic framework-derived advanced oxygen electrocatalysts as air-cathodes for Zn-air batteries: recent trends and future perspectives

Electrochemical energy storage devices with stable performance, high power output, and energy density are urgently needed to meet the global energy demand. Among the different electrochemical energy storage devices, batteries have become the most promising energy technologies and ranked as a highly investigated research subject. Recently, metal-air batteries especially Zn-air batteries (ZABs) have attracted enormous scientific interest in the electrochemical community due to their ease of operation, sustainability, environmental friendliness, and high efficiency. The oxygen electrocatalytic reactions [oxygen reduction reaction (ORR) and oxygen evolution reaction (OER)] are the two fundamental reactions for the development of ZABs. Noble metal-based electrocatalysts are widely considered as the benchmark for oxygen electrocatalysis, but their practical application in rechargeable ZAB is hindered due to several shortcomings. Thus, to replace noble metal-based catalysts, a wide range of transition-metal-based materials and heteroatom-doped metal-free carbon materials has been extensively investigated as oxygen electrocatalysts for ZABs. Recently, metal-organic frameworks (MOFs) with unique structural flexibility and uniformly dispersed active sites have become attractive precursors for the synthesis of a large variety of advanced functional materials. Herein, we summarize the recent progress of MOF-derived oxygen electrocatalysts (MOF-derived carbon nanomaterials, MOF-derived alloys/nanoparticles, and MOF-derived single-atom electrocatalysts) for ZABs. Specifically, we highlight MOF-derived single-atom electrocatalysts owing to the wide exploration of these emerging materials in electrocatalysis. The influence of the active sites, structural/compositional design, and porosity of MOF-derived advanced materials on the oxygen electrocatalytic performances is also discussed. Finally, the existing challenges and prospects of MOF-derived electrocatalysts in ZABs are briefly highlighted.

Pd-PdO Nanodomains on Amorphous Ru Metallene Oxide for High-Performance Multifunctional Electrocatalysis

Developing highly efficient multifunctional electrocatalysts is crucial for future sustainable energy  pursuits, but remains a great challenge. Herein, a facile synthetic strategy is used to confine atomically thin Pd-PdO nanodomains to amorphous Ru metallene oxide (RuO₂ ). The as-synthesized electrocatalyst (Pd₂ RuOx-0.5 h) exhibits excellent catalytic activity toward the pH-universal hydrogen evolution reaction (η₁₀  = 14 mV in 1 m KOH, η₁₀  = 12 mV in 0.5 m H₂ SO₄ , and η₁₀  = 22 mV in 1 m PBS), alkaline oxygen evolution reaction (η₁₀  = 225 mV), and overall water splitting (E₁₀  = 1.49 V) with high mass activity and operational stability. Further reduction endows the material (Pd₂ RuOx-2 h) with a promising alkaline oxygen reduction activity, evidenced by high halfway potential, four-electron selectivity, and excellent poison tolerance. The enhanced catalytic activity is attributed to the rational integration of favorable nanostructures, including 1) the atomically thin nanosheet morphology, 2) the coexisting amorphous and defective crystalline phases, and 3) the multi-component heterostructural features. These structural factors effectively regulate the material's electronic configuration and the adsorption of intermediates at the active sites for favorable reaction energetics.

Low-Coordination Trimetallic PtFeCo Nanosaws for Practical Fuel Cells

Developing high-performance catalysts for fuel cell catalysis is the most critical and challenging step for the commercialization of fuel cell technology. Here 1D trimetallic platinum-iron-cobalt nanosaws (Pt₃ FeCo NSs) with low-coordination features are designed as efficient bifunctional electrocatalysts for practical fuel cell catalysis. The oxygen reduction reaction (ORR) activity of Pt₃ FeCo NSs (10.62 mA cm^-2 and 4.66 A mg^-1 _Pt at 0.90 V) is more than 25-folds higher than that of the commercial Pt/C, even after 30 000 voltage cycles. Density functional theory calculations reveal that the strong inter-d-orbital electron transfer minimizes the ORR barrier with higher selectivity at robust valence states. The volcano correlation between the intrinsic structure featured with low-coordination Pt-sites and corresponding electronic activities is discovered, which guarantees high ORR activities. The Pt₃ FeCo NSs located in the membrane electrode assembly (MEA) also achieve very high peak power density (1800.6 mW cm^-2 ) and competitive specific/mass activities (1.79 mA cm^-2 and 0.79 A mg^-1 _Pt at 0.90 V_iR-free cell voltage) as well as a long-term lifetime in specific H₂ O₂ medium for proton-exchange-membrane fuel cells, ranking top electrocatalysts reported to date for MEA. This work represents a class of multimetallic Pt-based nanocatalysts for practical fuel cells and beyond.

Inducing Fe 3d Electron Delocalization and Spin-State Transition of FeN4 Species Boosts Oxygen Reduction Reaction for Wearable Zinc-Air Battery

Transition metal-nitrogen-carbon materials (M-N-Cs), particularly Fe-N-Cs, have been found to be electroactive for accelerating oxygen reduction reaction (ORR) kinetics. Although substantial efforts have been devoted to design Fe-N-Cs with increased active species content, surface area, and electronic conductivity, their performance is still far from satisfactory. Hitherto, there is limited research about regulation on the electronic spin states of Fe centers for Fe-N-Cs electrocatalysts to improve their catalytic performance. Here, we introduce Ti3C2 MXene with sulfur terminals to regulate the electronic configuration of FeN4 species and dramatically enhance catalytic activity toward ORR. The MXene with sulfur terminals induce the spin-state transition of FeN4 species and Fe 3d electron delocalization with d band center upshift, enabling the Fe(II) ions to bind oxygen in the end-on adsorption mode favorable to initiate the reduction of oxygen and boosting oxygen-containing groups adsorption on FeN4 species and ORR kinetics. The resulting FeN4-Ti3C2Sx exhibits comparable catalytic performance to those of commercial Pt-C. The developed wearable ZABs using FeN4-Ti3C2Sx also exhibit fast kinetics and excellent stability. This study confirms that regulation of the electronic structure of active species via coupling with their support can be a major contributor to enhance their catalytic activity.

Advances in Low Pt Loading Membrane Electrode Assembly for Proton Exchange Membrane Fuel Cells

Hydrogen has the potential to be one of the solutions that can address environmental pollution and greenhouse emissions from traditional fossil fuels. However, high costs hinder its large-scale commercialization, particularly for enabling devices such as proton exchange membrane fuel cells (PEMFCs). The precious metal Pt is indispensable in boosting the oxygen reduction reaction (ORR) in cathode electrocatalysts from the most crucial component, i.e., the membrane electrode assembly (MEA). MEAs account for a considerable amount of the entire cost of PEMFCs. To address these bottlenecks, researchers either increase Pt utilization efficiency or produce MEAs with enhanced performance but less Pt. Only a few reviews that explain the approaches are available. This review summarizes advances in designing nanocatalysts and optimizing the catalyst layer structure to achieve low-Pt loading MEAs. Different strategies and their corresponding effectiveness, e.g., performance in half-cells or MEA, are summarized and compared. Finally, future directions are discussed and proposed, aiming at affordable, highly active, and durable PEMFCs.

PtFeCoNiCu high-entropy solid solution alloy as highly efficient electrocatalyst for the oxygen reduction reaction

Searching for an efficient, durable, and low cost catalyst toward oxygen reduction reaction (ORR) is of paramount importance for the application of fuel cell technology. Herein, PtFeCoNiCu high-entropy alloy nanoparticles (PFCNC-HEA) is reported as electrocatalyst toward ORR. It shows remarkable ORR catalytic mass activity of 1.738 A mg^-1 _Pt at 0.90 V, which is 15.8 times higher than that of the state-of-art commercial Pt/C catalyst. It also exhibits outstanding stability with negligible voltage decay (3 mV) after 10k cycles accelerated durability test. High ORR activity is ascribed to the ligand effect caused by polymetallic elements, the optimization of the surface electronic structure, and the formation of multiple active sites on the surface. In the proton exchange membrane fuel cell setup, this cell delivers a power density of up to 1.380 W cm^-2 with a cathodic Pt loading of 0.03 mg_Pt cm^-2, demonstrating a promising catalyst design direction for highly efficient ORR.

Nanoceria as an Electron Reservoir: Spontaneous Deposition of Metal Nanoparticles on Oxides and Their Anti-inflammatory Activities

Designing metal-metal oxide heteronanostructures with synergistic and superior activities (unattainable in the case of a single entity) is of great interest for a wide range of technological applications. Traditional synthetic strategies typically require reducing agents, stabilizing ligands, or high temperature reductive treatment to produce oxide-supported metals. Herein, a facile noble metal deposition strategy is developed to produce silver, gold, and platinum nanocrystals on the surface of hollow mesoporous cerium oxide nanospheres without any pretreatment. Unlike the galvanic replacement reaction, the developed protocol employs the innate reductive potential of CeO₂ to produce a high density of ultrafine noble metal nanocrystals homogeneously immobilized onto the surface of CeO₂ nanospheres. The multienzyme-like activities (i.e., superoxide dismutase-like and catalase-like) of CeO₂@metal nanostructures, originating from CeO₂ and metal nanoparticles, were effectively utilized for anti-inflammatory therapies in two in vivo models. This oxygen vacancy-mediated reduction strategy can be generalized to produce diverse metal-metal oxide nanostructures for a wide range of applications.

Review on Magnetism in Catalysis: From Theory to PEMFC Applications of 3d Metal Pt-Based Alloys

The relationship between magnetism and catalysis has been an important topic since the mid-20th century. At present time, the scientific community is well aware that a full comprehension of this relationship is required to face modern challenges, such as the need for clean energy technology. The successful use of (para-)magnetic materials has already been corroborated in catalytic processes, such as hydrogenation, Fenton reaction and ammonia synthesis. These catalysts typically contain transition metals from the first to the third row and are affected by the presence of an external magnetic field. Nowadays, it appears that the most promising approach to reach the goal of a more sustainable future is via ferromagnetic conducting catalysts containing open-shell metals (i.e., Fe, Co and Ni) with extra stabilization coming from the presence of an external magnetic field. However, understanding how intrinsic and extrinsic magnetic features are related to catalysis is still a complex task, especially when catalytic performances are improved by these magnetic phenomena. In the present review, we introduce the relationship between magnetism and catalysis and outline its importance in the production of clean energy, by describing the representative case of 3d metal Pt-based alloys, which are extensively investigated and exploited in PEM fuel cells.

Recent advances in nanoparticles towards sustainability and their application in organic transformations in aqueous media

Nanoparticles (NPs) play a crucial role in organic transformation and are becoming increasingly attractive in the field of catalysis as they show good catalytic activity in organic as well as aqueous media. Numerous NPs have been utilized for several organic transformations in aqueous media, which have led to dedicated efforts for the complete coverage of the application of metal, metal oxide, bimetallic and supported NPs in water-mediated organic transformations in the last decades. This review aims to provide current highlights on the application of various types of metal NPs for organic transformations in aqueous media. The remarkable benefits associated with the catalytic application of NPs in water allows for various transformations to be performed under very mild and green conditions. Lastly, the author's perspectives are briefly considered, including future developments and crucial challenges in the ever-growing field of nanocatalysis.

Status Quo on Graphene Electrode Catalysts for Improved Oxygen Reduction and Evolution Reactions in Li-Air Batteries

Reduced global warming is the goal of carbon neutrality. Therefore, batteries are considered to be the best alternatives to current fossil fuels and an icon of the emerging energy industry. Voltaic cells are one of the power sources more frequently employed than photovoltaic cells in vehicles, consumer electronics, energy storage systems, and medical equipment. The most adaptable voltaic cells are lithium-ion batteries, which have the potential to meet the eagerly anticipated demands of the power sector. Working to increase their power generating and storage capability is therefore a challenging area of scientific focus. Apart from typical Li-ion batteries, Li-Air (Li-O₂) batteries are expected to produce high theoretical power densities (3505 W h kg^-1), which are ten times greater than that of Li-ion batteries (387 W h kg^-1). On the other hand, there are many challenges to reaching their maximum power capacity. Due to the oxygen reduction reaction (ORR) and oxygen evolution reaction (OES), the cathode usually faces many problems. Designing robust structured catalytic electrode materials and optimizing the electrolytes to improve their ability is highly challenging. Graphene is a 2D material with a stable hexagonal carbon network with high surface area, electrical, thermal conductivity, and flexibility with excellent chemical stability that could be a robust electrode material for Li-O₂ batteries. In this review, we covered graphene-based Li-O₂ batteries along with their existing problems and updated advantages, with conclusions and future perspectives.

Platinum-Rare Earth Alloy Electrocatalysts for the Oxygen Reduction Reaction: A Brief Overview

The development of highly active and long-term stable electrocatalysts for the cathode of proton-exchange membrane fuel cells (PEMFC) is a paramount requirement for high performance and durable PEMFC stacks. In this regard, alloying Pt with rare earth metals (REM) has emerged as a promising approach. This short review summarizes and discusses the most relevant advances on Pt-REM alloy electrocatalysts, from bulk polycrystalline surfaces to carbon supported nanostructures, for the oxygen reduction reaction (ORR), and their implementation in PEMFCs, and is a starting point to establish the challenges in synthesis and design and properties goals for novel Pt-REM alloys.

Tuning Two-Electron Oxygen-Reduction Pathways for H2 O2 Electrosynthesis via Engineering Atomically Dispersed Single Metal Site Catalysts

The hydrogen peroxide (H₂ O₂ ) generation via the electrochemical oxygen reduction reaction (ORR) under ambient conditions is emerging as an alternative and green strategy to the traditional energy-intensive anthraquinone process and unsafe direct synthesis using H₂ and O₂ . It enables on-site and decentralized H₂ O₂ production using air and renewable electricity for various applications. Currently, atomically dispersed single metal site catalysts have emerged as the most promising platinum group metal (PGM)-free electrocatalysts for the ORR. Further tuning their central metal sites, coordination environments, and local structures can be highly active and selective for H₂ O₂ production via the 2e^- ORR. Herein, recent methodologies and achievements on developing single metal site catalysts for selective O₂ to H₂ O₂ reduction are summarized. Combined with theoretical computation and advanced characterization, a structure-property correlation to guide rational catalyst design with a favorable 2e^- ORR process is aimed to provide. Due to the oxidative nature of H₂ O₂ and the derived free radicals, catalyst stability and effective solutions to improve catalyst tolerance to H₂ O₂ are emphasized. Transferring intrinsic catalyst properties to electrode performance for viable applications always remains a grand challenge. The key performance metrics and knowledge during the electrolyzer development are, therefore, highlighted.

Evidence of carbon-supported porphyrins pyrolyzed for the oxygen reduction reaction keeping integrity

Fe(III) 5,10,15,20-(tetraphenyl)porphyrin chloride (FeTPP) and Co(III) 5,10,15,20-(tetraphenyl)porphyrin chloride (CoTPP) were adsorbed on carbon Vulcan and studied as electrocatalysts for the oxygen reduction reaction (ORR) before and after pyrolysis. The pyrolysis process was also simulated through ab initio molecular dynamic simulations and the minimum energy path for the O₂ dissociation after the interaction with the metal center of the FeTPP and CoTPP were calculated. After the pyrolysis the FeTPP showed the best performances reducing O₂ completely to H₂O with increased limiting current and lower overpotential. Tafel slops for the various catalysts did not change after the pyrolytic process suggesting that the mechanism for the ORR is not affected by the heat treatment. TEM images, X-ray diffraction, XPS spectroscopy, ⁵⁷Fe Mössbauer, and DFT simulations, suggest that there is no breakdown of the macrocyclic complex at elevated temperatures, and that the macro cyclic geometry is preserved. Small variations in the Metal-O₂ (M-O₂) binding energies and the M–N bond length were observed which is attributed to the dispersive interaction between the macrocycles and the irregular surface of the Vulcan substrate induced by the heat treatment and causing better interaction with the O₂ molecule. The theoretical strategy herein applied well simulate and explain the nature of the M–N–C active sites and the performances towards the ORR.

Effect of Precursor Status on the Transition from Complex to Carbon Shell in a Platinum Core-Carbon Shell Catalyst

Encapsulating platinum nanoparticles with a carbon shell can increase the stability of core platinum nanoparticles by preventing their dissolution and agglomeration. In this study, the synthesis mechanism of a platinum core-carbon shell catalyst via thermal reduction of a platinum-aniline complex was investigated to determine how the carbon shell forms and identify the key factor determining the properties of the Pt core-carbon shell catalyst. Three catalysts originating from the complexes with different platinum to carbon precursor ratios were synthesized through pyrolysis. Their structural characteristics were examined using various analysis techniques, and their electrochemical activity and stability were evaluated through half-cell and unit-cell tests. The relationship between the nitrogen to platinum ratio and structural characteristics was revealed, and the effects on the electrochemical activity and stability were discussed. The ratio of the carbon precursor to platinum was the decisive factor determining the properties of the platinum core-carbon shell catalyst.

Formation Mechanism of Carbon-Supported Hollow PtNi Nanoparticles via One-Step Preparations for Use in the Oxygen Reduction Reaction

Hollow Pt-based nanoparticles are known to possess the properties of high electrocatalytic activity and durability. Nonetheless, their practical applications as catalytic materials are limited because of the requirement for exhaustive preparation. In this study, we prepared carbon-supported hollow PtNix (x = the moles of the Ni precursor to the Pt precursor in the catalyst preparation step) catalysts using a one-step preparation method, which substantially reduced the complexity of the conventional method for preparing hollow Pt-based catalysts. In particular, this hollow structure formation mechanism was proposed based on extensive characterizations. The prepared catalysts were examined to determine if they could be used as electrocatalysts for the oxygen reduction reaction (ORR). Among the investigated catalysts, the acid-treated hollow PtNi3/C catalyst demonstrated the best ORR activity, which was 3 times higher and 2.3 times higher than those of the commercial Pt/C and acid-treated particulate PtNi3/C catalysts, respectively.

Superior catalytic performance of intermetallic CaPt2 nanoparticles supported on titanium group oxides in hydrogenation of ketones to alcohols

Intermetallic CaPt₂ nanoparticles, supported on titanium group oxides, were prepared using a molten salt method with CaH₂ as both the reducing agent and the calcium source. The nanoparticles exhibited superior catalytic activity compared to a commercial Pt/C catalyst in the hydrogenation of ketones to alcohols, which could be promoted by electron-rich Pt sites in CaPt₂.

Defect-Rich, Highly Porous PtAg Nanoflowers with Superior Anti-Poisoning Ability for Efficient Methanol Oxidation Reaction

The design of efficient and sustainable Pt-based catalysts is the key to the development of direct methanol fuel cells. However, most Pt-based catalysts still exhibit disadvantages including unsatisfied catalytic activity and serious CO poisoning in the methanol oxidation reaction (MOR). Herein, highly porous PtAg nanoflowers (NFs) with rich defects are synthesized by using liquid reduction combining chemical etching. It is demonstrated that the proportion of precursors determines the inhomogeneity of alloy elements, and the strong corrosiveness of nitric acid to silver leads to the eventual porous flower-like structure. Impressively, the optimal etched Pt₁ Ag₂ NFs have the mixed defects of surface steps, dislocations, and bulk holes, and their mass activity (1136 mA mg_Pt^-1 ) is 2.6 times higher than that of commercial Pt/C catalysts, while the ratio of forward and backward peak current density (I_f /I_b ) can reach 3.2, exhibiting an excellent anti-poisoning ability. Density functional theory calculations further verify their high anti-poison properties from both an adsorption and an oxidation perspective of CO intermediate. The introduction of Ag makes it easier for CO to be oxidized and removed. This study provides a facile approach to prepare rich defects and porous alloy with excellent MOR performance and superior anti-poisoning ability.

Formic Acid Dehydrogenation Using Noble-Metal Nanoheterogeneous Catalysts: Towards Sustainable Hydrogen-Based Energy

The need for sustainable energy sources is now more urgent than ever, and hydrogen is significant in the future of energy. However, several obstacles remain in the way of widespread hydrogen use, most of which are related to transport and storage. Dilute formic acid (FA) is recognized asa a safe fuel for low-temperature fuel cells. This review examines FA as a potential hydrogen storage molecule that can be dehydrogenated to yield highly pure hydrogen (H2) and carbon dioxide (CO2) with very little carbon monoxide (CO) gas produced via nanoheterogeneous catalysts. It also present the use of Au and Pd as nanoheterogeneous catalysts for formic acid liquid phase decomposition, focusing on the influence of noble metals in monometallic, bimetallic, and trimetallic compositions on the catalytic dehydrogenation of FA under mild temperatures (20–50 °C). The review shows that FA production from CO2 without a base by direct catalytic carbon dioxide hydrogenation is far more sustainable than existing techniques. Finally, using FA as an energy carrier to selectively release hydrogen for fuel cell power generation appears to be a potential technique.

Relativistic Effects in Platinum Nanocluster Catalysis: A Statistical Ensemble-Based Analysis

Nanoclusters are materials of paramount catalytic importance. Among various unique properties featured by nanoclusters, a pronounced relativistic effect can be a decisive parameter in governing their catalytic activity. A concise study delineating the role of relativistic effects in nanocluster catalysis is carried by investigating the oxygen reduction reaction (ORR) activity of a Pt₇ subnanometer cluster. Global optimization analysis shows the critical role of spin-orbit coupling (SOC) in regulating the relative stability between structural isomers of the cluster. An overall improved ORR adsorption energetics and differently scaled adsorption-induced structural changes are identified with SOC compared to a non-SOC scenario. Ab initio atomistic thermodynamics analysis predicted nearly identical phase diagrams with significant structural differences for high coverage oxygenated clusters under realistic conditions. Though inclusion of SOC does not bring about drastic changes in the overall catalytic activity of the cluster, it is having a crucial role in governing the rate-determining step, transition-state configuration, and energetics of elementary reaction pathways. Furthermore, a statistical ensemble-based approach illustrates the strong contribution of low-energy local minimum structural isomers to the total ORR activity, which is significantly scaled up along the activity improving direction within the SOC framework. The study provides critical insights toward the importance of relativistic effects in determining various catalytic activity relevant features of nanoclusters.