Investigation of induced electroosmotic flow in small-scale capillary electrophoresis devices: Strategies for control and reversal

Electroosmotic flow (EOF) is the bulk flow of solution in a capillary or microchannel induced by an applied electric potential. For capillary and microchip electrophoresis, the EOF enables analysis of both cations and anions in one separation and can be varied to modify separation speed and resolution. The EOF arises from an electrical double layer at the capillary wall and is normally controlled through the pH and ionic strength of the background buffer or with the use of additives. Understanding and controlling the electrical double layer is therefore critical for maintaining acceptable repeatability during method development. Surprisingly, in fused silica capillaries at low pH, studies observe an EOF even though the capillary surface should be neutralized. Previous work has suggested the presence of an "induced electroosmotic flow" from radial electric fields generated across the capillary wall due to the separation voltage and grounded components external to the capillary. Using thin-wall (15 µm) fused silica separation capillaries to facilitate the study of radial fields, we show that the EOF mobility depends on both the separation voltage and the location of external grounds. This is consistent with the induced EOF model, in which radial electric fields embed positive charges at the capillary walls to create an electrical double layer. The magnitude of the effect is characterized and shown to have long-range influences that are difficult to completely null by moving grounded components away from the separation capillary. Instead, active EOF control using externally applied potentials or a passive approach using a negative separation voltage are discussed as two possible methods for controlling the induced EOF. Both methods can reverse the EOF and improve the resolution and peak efficiency in amino acid separations.

Electrophoretic Determination of L-Carnosine in Health Supplements Using an Integrated Lab-on-a-Chip Platform with Contactless Conductivity Detection

The health supplement industry is one of the fastest growing industries in the world, but there is a lack of suitable analytical methods for the determination of active compounds in health supplements such as peptides. The present work describes an implementation of contactless conductivity detection on microchip technology as a new strategy for the electrophoretic determination of L-carnosine in complex health supplement formulations without pre-concentration and derivatization steps. The best results were obtained in the case of +1.00 kV applied for 20 s for injection and +2.75 kV applied for 260 s for the separation step. Under the selected conditions, a linear detector response of 5 × 10-6 to 5 × 10-5 M was achieved. L-carnosine retention time was 61 s. The excellent reproducibility of both migration time and detector response confirmed the high precision of the method. The applicability of the method was demonstrated by the determination of L-carnosine in three different samples of health supplements. The recoveries ranged from 91 to 105%. Subsequent analysis of the samples by CE-UV-VIS and HPLC-DAD confirmed the accuracy of the obtained results.

Diffusion layer formation drives zone migration in travelling wave electrophoresis

COMSOL finite element modeling software is used to simulate 2D traveling-wave electrophoresis for microfluidic separations and sample concentration. A four-phase AC potential is applied to a periodic interdigitated four-electrode array to produce a longitudinal electric wave that travels through the channel. Charged particles are carried along with the electric wave or left behind, depending on their mobilities. A simplified model of asymmetric electrode reactions resolves the issue of electric double layer shielding at the electrodes. Selective reactions allow for the formation of diffusion layers of charged particles which follow the traveling electric wave. These diffusion layers determine the transport of charged species through the system. Our model reproduces experimental separations of charged species based on mobility. With easy control over the frequency and direction, one may employ this method for concentrating and/or separating charged particles.

Dual-opposite injection capillary electrophoresis: Principles and misconceptions

Dual-opposite injection capillary electrophoresis (DOI-CE) is a separation technique that utilizes both ends of the capillary for sample introduction. The electroosmotic flow (EOF) is suppressed to allow all ions to reach the detector quickly. Depending on the individual electrophoretic mobilities of the analytes of interest and the effective length that each analyte travels to the detection window, the elution order of analytes in a DOI-CE separation can vary widely. This review discusses the principles, applications, and limitations of dual-opposite injection capillary electrophoresis. Common misconceptions regarding DOI-CE are clarified.

Triple-channel portable capillary electrophoresis instrument with individual background electrolytes for the concurrent separations of anionic and cationic species

The portable capillary electrophoresis instrument is automated and features three independent channels with different background electrolytes to allow the concurrent optimized determination of three different categories of charged analytes. The fluidic system is based on a miniature manifold which is based on mechanically milled channels for injection of samples and buffers. The planar manifold pattern was designed to minimize the number of electronic valves required for each channel. The system utilizes pneumatic pressurization to transport solutions at the grounded as well as the high voltage side of the separation capillaries. The instrument has a compact design, with all components arranged in a briefcase with dimensions of 45 (w) × 35 (d) × 15 cm (h) and a weight of about 15 kg. It can operate continuously for 8 h in the battery-powered mode if only one electrophoresis channel is in use, or for about 2.5 h in the case of simultaneous employment of all three channels. The different operations, i.e. capillary flushing, rinsing of the interfaces at both capillary ends, sample injection and electrophoretic separation, are activated automatically with a control program featuring a graphical user interface. For demonstration, the system was employed successfully for the concurrent separation of different inorganic cations and anions, organic preservatives, additives and artificial sweeteners in various beverage and food matrices.

Present state of microchip electrophoresis: state of the art and routine applications

Microchip electrophoresis (MCE) was one of the earliest applications of the micro-total analysis system (μ-TAS) concept, whose aim is to reduce analysis time and reagent and sample consumption while increasing throughput and portability by miniaturizing analytical laboratory procedures onto a microfluidic chip. More than two decades on, electrophoresis remains the most common separation technique used in microfluidic applications. MCE-based instruments have had some commercial success and have found application in many disciplines. This review will consider the present state of MCE including recent advances in technology and both novel and routine applications in the laboratory. We will also attempt to assess the impact of MCE in the scientific community and its prospects for the future.

Concurrent determination of anions and cations in consumer fireworks with a portable dual-capillary electrophoresis system

A new automated portable dual-channel capillary electrophoresis instrument was built and applied to the concurrent determination of cations and anions. The system uses a single buffer and hydrodynamic injection of the sample is performed autonomously. A novel engraved flow-cell interface is used at the injection ends of the capillaries allowing the autonomous operation of the system. The engraved flow-cell replaces traditionally used split injectors in purpose made capillary electrophoresis systems and makes the system design easier. A new software package with graphical user interface was employed to control the system, making its operation simple and increasing its versatility. The electrophoretic method was optimized to allow the baseline separation of 12 cations and anions commonly found in fireworks. The system was proven to be useful for the analysis of consumer fireworks, saving time and expenses compared to separate analyses for anions and cations. This is the first time that cationic and anionic compositions of fireworks are investigated together. The analysis of samples revealed several inaccuracies between the declared compositions for the fireworks and the obtained results, which could be attributed to cross-contamination during their manufacture or to a transfer between other components of the pyrotechnic item. The presence of certain unexpected peaks, however, had no apparent reason and might represent an irregularity in the manufacture of some devices.

Velocity plateaus in traveling-wave electrophoresis

One-dimensional models are used to study traveling-wave electrophoresis, a tunable method for separating charged analytes. A traveling-electrode model reveals the mechanism for longitudinal oscillations. A stationary-electrode model explains the origin of mode-locked plateaus in the average velocity, predicts devil's staircases with nested Farey sequences, and reduces to a continuum sinusoidal model in the high electrode-density limit.

Using electrophoretic exclusion to manipulate small molecules and particles on a microdevice

Electrophoretic exclusion, a novel separations technique that differentiates species in bulk solution using the opposing forces of electrophoretic velocity and hydrodynamic flow, has been adapted to a microscale device. Proof-of-principle experiments indicate that the device was able to exclude small particles (1 μm polystyrene microspheres) and fluorescent dye molecules (rhodamine 123) from the entrance of a channel. Additionally, differentiation of the rhodamine 123 and polystyrene spheres was demonstrated. The current studies focus on the direct observation of the electrophoretic exclusion behavior on a microchip.