A Versatile Reversible, Degenerative Chain Transfer Mechanism for the Catalytic Living Ring-Opening Metathesis Polymerization

Most metathesis polymers based on norbornene derivatives carry a vinyl end group. Here we show that these vinyl end groups readily undergo a degenerative exchange of the terminal methylene unit in the presence of sub-stoichiometric amounts of a propagating metathesis polymer carrying a Grubbs ruthenium complex. We show that this degenerative exchange can be exploited in synthesizing ROMP polymers in a catalytic living fashion. Chain transfer agents based on styrene, or monosubstituted conjugated 1,3 diene derivatives are used as initiating sites for the catalytic living polymerization. Suitable derivatives of these chain transfer agents not only allow the linear living growth of polymers but also the synthesis of block copolymers from macro-initiators or star polymers from multi-functional chain transfer agents. This reversible exchange mechanism offers a cheaper, greener, and more sustainable alternative for the synthesis of living ROMP polymers compared to the classical synthetic route.

Role of silicon in alleviating boron toxicity and enhancing growth and physiological traits in hydroponically cultivated Zea mays var. Merit

BACKGROUND

Boron (B) is a micronutrient, but excessive levels can cause phytotoxicity, impaired growth, and reduced photosynthesis. B toxicity arises from over-fertilization, high soil B levels, or irrigation with B-rich water. Conversely, silicon (Si) is recognized as an element that mitigates stress and alleviates the toxic effects of certain nutrients. In this study, to evaluate the effect of different concentrations of Si on maize under boron stress conditions, a factorial experiment based on a randomized complete block design was conducted with three replications in a hydroponic system. The experiment utilized a nutrient solution for maize var. Merit that contained three different boron (B) concentrations (0.5, 2, and 4 mg L-1) and three Si concentrations (0, 28, and 56 mg L-1).

RESULTS

Our findings unveiled that exogenous application of B resulted in a substantial escalation of B concentration in maize leaves. Furthermore, B exposure elicited a significant diminution in fresh and dry plant biomass, chlorophyll index, chlorophyll a (Chl a), chlorophyll b (Chl b), carotenoids, and membrane stability index (MSI). As the B concentration augmented, malondialdehyde (MDA) content and catalase (CAT) enzyme activity exhibited a concomitant increment. Conversely, the supplementation of Si facilitated an amelioration in plant fresh and dry weight, total carbohydrate, and total soluble protein. Moreover, the elevated activity of antioxidant enzymes culminated in a decrement in hydrogen peroxide (H2O2) and MDA content. In addition, the combined influence of Si and B had a statistically significant impact on the leaf chlorophyll index, total chlorophyll (a + b) content, Si and B accumulation levels, as well as the enzymatic activities of guaiacol peroxidase (GPX), ascorbate peroxidase (APX), and H2O2 levels. These unique findings indicated the detrimental impact of B toxicity on various physiological and biochemical attributes of maize, while highlighting the potential of Si supplementation in mitigating the deleterious effects through modulation of antioxidant machinery and biomolecule synthesis.

CONCLUSIONS

This study highlights the potential of Si supplementation in alleviating the deleterious effects of B toxicity in maize. Increased Si consumption mitigated chlorophyll degradation under B toxicity, but it also caused a significant reduction in the concentrations of essential micronutrients iron (Fe), copper (Cu), and zinc (Zn). While Si supplementation shows promise in counteracting B toxicity, the observed decrease in Fe, Cu, and Zn concentrations warrants further investigation to optimize this approach and maintain overall plant nutritional status.

Designing Degradable Polymers from Tricycloalkenes via Complete Cascade Metathesis Polymerization

Cascade metathesis polymerization has been developed as a promising method to synthesize complex but well-defined polymers from monomers containing multiple reactive functional groups. However, this approach has been limited to the monomers involving simple alkene/alkyne moieties or produced mainly non-degradable polymers. In this study, we demonstrate a complete cascade ring-opening/ring-closing metathesis polymerization (RORCMP) using various tricycloalkenes and two strategies for the efficient degradation. Through rational design of tricycloalkene monomers, the structure and reactivity relationship was explored. For example, tricycloalkenes with trans configuration in the central ring enabled faster and better selective cascade RORCMP than the corresponding cis isomers. Also, a 4-substituted cyclopentene moiety in the monomers significantly enhanced the overall cascade RORCMP performance, with the maximum turnover number (TON) reaching almost 10,000 and molecular weight up to 170 kg/mol using an amide-containing monomer. Furthermore, we achieved one-shot cascade multiple olefin metathesis polymerization using tricycloalkenes and a diacrylate, to produce new highly A,B-alternating copolymers with full degradability. Lastly, we successfully designed xylose-based tricycloalkenes to give well-defined polymers that underwent ultra-fast and complete degradation under mild conditions.

Emerging polymeric materials for treatment of oral diseases: design strategy towards a unique oral environment

Oral diseases are prevalent but challenging diseases owing to the highly movable and wet, microbial and inflammatory environment. Polymeric materials are regarded as one of the most promising biomaterials due to their good compatibility, facile preparation, and flexible design to obtain multifunctionality. Therefore, a variety of strategies have been employed to develop materials with improved therapeutic efficacy by overcoming physicobiological barriers in oral diseases. In this review, we summarize the design strategies of polymeric biomaterials for the treatment of oral diseases. First, we present the unique oral environment including highly movable and wet, microbial and inflammatory environment, which hinders the effective treatment of oral diseases. Second, a series of strategies for designing polymeric materials towards such a unique oral environment are highlighted. For example, multifunctional polymeric materials are armed with wet-adhesive, antimicrobial, and anti-inflammatory functions through advanced chemistry and nanotechnology to effectively treat oral diseases. These are achieved by designing wet-adhesive polymers modified with hydroxy, amine, quinone, and aldehyde groups to provide strong wet-adhesion through hydrogen and covalent bonding, and electrostatic and hydrophobic interactions, by developing antimicrobial polymers including cationic polymers, antimicrobial peptides, and antibiotic-conjugated polymers, and by synthesizing anti-inflammatory polymers with phenolic hydroxy and cysteine groups that function as immunomodulators and electron donors to reactive oxygen species to reduce inflammation. Third, various delivery systems with strong wet-adhesion and enhanced mucosa and biofilm penetration capabilities, such as nanoparticles, hydrogels, patches, and microneedles, are constructed for delivery of antibiotics, immunomodulators, and antioxidants to achieve therapeutic efficacy. Finally, we provide insights into challenges and future development of polymeric materials for oral diseases with promise for clinical translation.

Diazene-Catalyzed Oxidative Alkyl Halide-Olefin Metathesis

The first platform for oxidative alkyl halide-olefin metathesis is described. The procedure employs diazenes as catalysts, which effect the cyclization of alkenyl alkyl halides to generate cyclic olefins and carbonyl products. The synthesis of phenanthrene, coumarin, and quinolone derivatives is demonstrated as well as the potential to apply this strategy to other electrophiles.

Recent Advancements in Mechanistic Studies of Palladium- and Nickel-Catalyzed Ethylene Copolymerization with Polar Monomers

The introduction of polar functional groups into polyolefin chain structures creates opportunities to enhance specific properties, such as adhesion, dyeability, printability, compatibility, thermal stability, and electrical conductivity, which widen the range of potential applications for these modified materials. Transition metal catalysts, especially late transition metals, have proven to be highly effective in copolymerization processes due to their reduced Lewis acidity and electrophilicity. However, when compared to the significant progress and summary of synthetic methods, there is a distinct lack of a comprehensive summary of mechanistic studies pertaining to the catalytic systems involved in ethylene copolymerization catalyzed by palladium and nickel catalysts. In this review, we have provided a comprehensive summary of the latest developments in mechanistic studies of ethylene copolymerization with polar monomers catalyzed by late-transition-metal complexes. Experimental and computational methods were employed to conduct a detailed investigation of these organic and organometallic systems. It is mainly focused on ligand substitution, changes in binding modes, ethylene/polar monomer insertion, chelate opening, and β-H elimination. Factors that control the catalytic activity, molecular weight, comonomer incorporation ratios, and branch content are analyzed, these include steric repulsions between ligands and monomers, electronic effects arising from both ligands and monomers, and so on.

Synthesis of Degradable Polyolefins Bearing Disulfide Units via Metathesis Copolymerization

Disulfide bonds are dynamic covalent bonds, which are easy to cleave and reform upon chemical stimulus. Various methods including the oxidative coupling of thiols and polymerization of disulfide-containing monomers have been developed for the synthesis of poly(disulfide)s. However, installing small amounts of disulfide units in the main chain of polyolefins has received much less attention. Herein, we report a novel strategy for incorporating cleavable disulfide units into the backbone of polyolefins using commercially available diallyl disulfide (DADS) as a comonomer via metathesis copolymerization. The copolymerization of diallyl disulfide with cyclooctene occurred using the second-generation Grubbs catalyst under mild conditions, allowing for the synthesis of copolymers with adjustable disulfide content ranging from 0.7 to 8.5 mol%, and the molecular weight of the obtained copolymers ranged from 5.8 kg·mol^-1 to 42.8 kg·mol^-1. The resulting polyolefins with disulfide insertion retained excellent thermal processability and exhibited degradability. Treatment of the copolymer (8.5 mol% disulfide content) with tri-n-butylphosphine resulted in a significant reduction in molecular weight from 5.8 kg·mol^-1 to 1.6 kg·mol^-1. Successful copolymerization with diallyl disulfide provides a convenient and effective method for obtaining degradable polyolefins.

Methanol-Assisted ADMET Polymerization of Semiaromatic Amides

A method for the acyclic diene metathesis polymerization of semiaromatic amides is described. The procedure uses second-generation Grubbs' catalyst and N-cyclohexyl-2-pyrrolidone (CHP), a high boiling, polar solvent capable of solubilizing both monomer and polymer. The addition of methanol to the reaction was found to significantly increase polymer molar mass although the role of the alcohol is currently not understood. Hydrogenation with hydrogen gas and Wilkinson's catalyst resulted in near-quantitative saturation. All polymers synthesized here exhibit a hierarchical semicrystalline morphology driven by ordering of aromatic amide groups via strong nonbonded interactions. Furthermore, the melting points can be tuned over a >100 °C range by precise substitution at just one of the backbone positions on each mer (<5% of the total).

Construction of Bio-Based Polyurethanes via Olefin Metathesis and Their Thermal Reversible Behavior

With the increase in awareness of environmental protection and the shortage of oil resources, bio-based polyurethane has attracted increasing attention due to its ecological friendliness, low cost and easy degradation. In this paper, using Eugenol (Eug) derived from plant essential oils as the raw resource, syringyl ethanol (Syol) was prepared, and three monomers were obtained by the reaction of the Eug or Syol with Hexamethylene diisocyanate (HDI)or 4,4′-methylene di (phenyl isocyanate) (MDI), respectively. Then, three novel bio-based polyurethanes, P(Eug-HDI), P(Syol-HDI) and P(Syol-MDI), were synthesized by olefin metathesis polymerization. The effects of the catalyst type, reaction solvent, reaction temperature, reaction time, molar ratio of catalyst dosage and metal salts on the Eug-HDI olefin metathesis polymerization were investigated in detail. Under the optimal conditions, the yield reached 64.7%. It is worth noting that the addition of metal Ni salts could significantly promote the polymerization, in which NiI₂ could increase the yield to 86.6%. Furthermore, the thermal decomposition behaviors of these bio-based polyurethanes were explored by DSC and variable temperature infrared spectroscopy. The test results showed that P(Eug-HDI) had a reversible thermal decomposition and a certain self-healing performance. This paper provided a new method for the preparation of bio-based polyurethane.

Controlled Living Cascade Polymerization of Polycyclic Enyne Monomers: Leveraging Complete Degradability for a Stereochemical and Structural Investigation

Cascade polymerizations recently gained significant attention due to their use of unique transformations, involving multiple bond making and/or breaking steps, when converting monomers to repeat units. However, designing complex cascade polymerizations which proceed in a controlled manner is very challenging. Various side reactions can hamper polymerization performance and the efficiency of the cascade. In this work, we explore a metathesis-based cascade polymerization of unique polycyclic enyne monomers, which contain a terminal alkyne and two cyclic alkenes. By modifying the monomer's stereochemistry, linkers, and ring types, we were able to modulate the polymerization performance and the extent to which a complete cascade reaction occurs. Upon subjecting the resulting polymers to mild acidic conditions and analyzing the degradation products, we were able to calculate the percentage of repeat units derived from a complete cascade reaction (termed the cascade efficiency). In addition to identifying how various structural parameters in the monomer influence the success of a cascade polymerization, we were able to achieve controlled living cascade polymerizations of multiple monomers with >99% cascade efficiency and produce various block copolymers.

Approaches to Preceramic Polymer Fiber Fabrication and On-Demand Applications

The demand for lightweight, high-modulus, and temperature-resistant materials for aerospace and other high-temperature applications has contributed to the development of ceramic fibers that exhibit most of the favorable properties of monolithic ceramics. This review demonstrates preceramic-based polymer fiber spinning and fiber classifications. We discuss different types of fiber spinning and the advantages of each. Tuning the preceramic polymer chemical properties, molar mass, functional chemistry influences, and incorporation with fillers are thoroughly investigated. Further, we present the applications of preceramic-based polymer fibers in different fields including aerospace, biomedical, and sensor applications. This concise review summarizes recent developments in preceramic fiber chemistry and essential applications.

Merging Grubbs second-generation catalyst with photocatalysis enables Z-selective metathesis of olefins: scope, limitations, and mechanism

Olefin cross-metathesis is a cornerstone reaction in organic synthesis where stereoselectivity is typically governed by the structure of the catalyst. In this work, we show that merging Grubbs second generation catalyst, a classical E-selective catalyst, with a readily available photocatalyst, enables the exclusive formation of the contra-thermodynamic Z-isomer. The scope and limitations of this unprecedented approach are discussed based on both computational and experimental mechanistic data.

Light is magic! The combination of Grubbs second generation catalyst, a well-known catalyst for E-selective olefin metathesis, with a photosensitizer enables efficient access to the contra-thermodynamic Z-isomers.

Highly selective ethenolysis with acyclic-aminooxycarbene ruthenium catalysts

Acyclic carbene–ruthenium catalysts were developed for the ethenolysis. Remarkable catalytic efficiency (turnover numbers of 100 000) and excellent α-olefin selectivity (up to 98%) were exhibited.

Synthesis of Semicrystalline Long Chain Aliphatic Polyesters by ADMET Copolymerization of Dianhydro-D-glucityl bis(undec-10-enoate) with 1,9-Decadiene and Tandem Hydrogenation

Acyclic diene metathesis (ADMET) copolymerization of dianhydro-D-glucityl bis(undec-10-enoate) (M1) with 1,9-decadiene (DCD) using ruthenium-carbene catalyst, RuCl2(IMesH2)(CH-2-OiPr-C6H4) [IMesH2 = 1,3-bis(2,4,6-trimethylphenyl)imidazolin-2-ylidene, HG2], afforded unsaturated polyesters (Mn = 9300–23,400) under the optimized conditions. Subsequent tandem hydrogenation (H2 1.0 MPa, 50 °C) with the addition of a small amount of Al2O3 resulted in the saturated polymers having a melting temperature of 71.7–107.6 °C, depending on the molar ratio of M1 and DCD.

Plant oil-based polymers

Polymer materials derived from natural resources have gained increasing attention in recent years because of the uncertainties concerning petroleum supply and prices in the future as well as their environmental pollution problems. As one of the most abundant renewable resources, plant oils are suitable starting materials for polymers because of their low cost, the rich chemistry that their triglyceride structure provides, and their potential biodegradability. This chapter covers the structure, modification of triglycerides and their derivatives as well as synthesis of polymers therefrom. The remarkable advances during the last two decades in organic synthesis using plant oils and the basic oleochemicals derived from them are selectively reported and updated. Various methods, such as condensation, radical/cationic polymerization, metathesis procedure, and living polymerization, have also been applied in constructing oil-based polymers. Based on the advance of these changes, traditional polymers such as polyamides, polyesters, and epoxy resins have been renewed. Partial oil-based polymers have already been applied in some industrial areas and recent developments in this field offer promising new opportunities.

Acyclic Diene Metathesis (ADMET) Polymerization of 2,2,6,6-Tetramethylpiperidine-1-sulfanyl (TEMPS) Dimers

The preparation of polymers containing sulfur-nitrogen bond derivatives, particularly 2,2,6,6-tetramethylpiperidine-1-sulfanyl (TEMPS) dimers (i.e., BiTEMPS), has been limited to free-radical or conventional step-growth polymerization as result of the inherent thermal lability of the BiTEMPS unit. Accordingly, a novel poly(diaminodisulfide) possessing the BiTEMPS functional group is synthesized via acyclic diene metathesis (ADMET) polymerization at 65-75 °C within 3 h with precise control over the primary polymer structure. Polymer is isolated with an M_n of 20 400 g mol^-1 and Ð of 1.9. Importantly, detailed nuclear magnetic resonance (NMR), size exclusion chromatography, attenuated total reflectance Fourier transform infrared (ATR-IR) in addition to elemental analysis studies of the BiTEMPS polymer confirm the successful polymerization, and show that the BiTEMPS unit remains intact during the polymerization process. Furthermore, the previously unexplored UV-responsiveness of the BiTEMPS decorated polymer backbone is investigated for the very first time.

Synthesis of telechelic polyolefins

A comprehensive review of all the methodologies developed for the synthesis of telechelic polyolefins is reported.

Sustainability in Ru- and Pd-based catalytic systems using N-heterocyclic carbenes as ligands

This review is a critical presentation of catalysts based on palladium and ruthenium bearing N-heterocyclic carbene ligands that have enabled a more sustainable approach to catalysis and to catalyst uses.

Sugar-Based Polymers from d-Xylose: Living Cascade Polymerization, Tunable Degradation, and Small Molecule Release

Enyne monomers derived from D-xylose underwent living cascade polymerizations to prepare new polymers with a ring-opened sugar and degradable linkage incorporated into every repeat unit of the backbone. Polymerizations were well-controlled and had living character, which enabled the preparation of high molecular weight polymers with narrow molecular weight dispersity values and a block copolymer. By tuning the type of acid-sensitive linkage (hemi-aminal ether, acetal, or ether functional groups), we could change the degradation profile of the polymer and the identity of the resulting degradation products. For instance, the large difference in degradation rates between hemi-aminal ether and ether-based polymers enabled the sequential degradation of a block copolymer. Furthermore, we exploited the generation of furan-based degradation products, from an acetal-based polymer, to achieve the release of covalently bound reporter molecules upon degradation.

Alternating Cascade Metathesis Polymerization of Enynes and Cyclic Enol Ethers with Active Ruthenium Fischer Carbenes

Ruthenium alkoxymethylidene complexes have rarely been demonstrated as active species in metathesis reactions and are frequently regarded as inert. Herein, we highlight the ability of these Fischer-type carbenes to participate in cascade alternating ring-opening metathesis polymerization through their efficient alkyne addition reactions. When enyne monomers are combined with low-strain cyclic vinyl ethers, a controlled chain-growth copolymerization occurs that exhibits high degrees of alternation (>90% alternating diads) and produces degradable poly(vinyl ether) materials with low dispersities and targetable molecular weights. This new method is amenable to the synthesis of alternating diblock polymers that can be degraded to small-molecule fragments under aqueous acidic conditions. This work furthers the potential of Fischer-type ruthenium alkylidenes in polymerization strategies and presents new avenues for the generation of functional metathesis materials.

Synthesis of Biobased Long-Chain Polyesters by Acyclic Diene Metathesis Polymerization and Tandem Hydrogenation and Depolymerization with Ethylene

Acyclic diene metathesis (ADMET) polymerization of biobased α,ω-dienes of bis(undec-10-enoate) with diols (1,4-butanediol, isosorbide, isomannide, and 1,4-cyclohexanedimethanol) afforded high-molecular weight unsaturated polyesters, and subsequent tandem hydrogenation (H2 1.0 MPa, 50 °C, 3 h) gave the saturated polymers upon addition of a small amount of Al2O3 (1.0-1.7 wt %). Subsequent reaction of the unsaturated polymers with ethylene afforded the oligomers (by depolymerization and degradation).

Vitamin C Loaded Polyethylene: Synthesis and Properties of Precise Polyethylene with Vitamin C Defects via Acyclic Diene Metathesis Polycondensation

A polyethylene-like polymer with an in-chain vitamin C group was synthesized by olefin metathesis polymerization. Here, we describe both the synthesis and a comprehensive physical characterization. Because of the olefin metathesis synthesis, the vitamin C groups are equidistantly arranged in the polyethylene (PE) main chain. Their separation was adjusted to 20 CH₂ units. After hydrogenation, a semicrystalline polymer is obtained that is soluble in polar solvents. Because of its size and steric effect, the vitamin C acts as a chain defect, which is expelled from the crystal lattice, yielding a lamellar crystal with a homogeneous thickness corresponding to the interdefect distance. The physical properties were examined by various methods including differential scanning calorimetry, X-ray scattering, and transmission electron microscopy. We show that vitamin C retains its radical scavenger properties despite being incorporated into a polyethylene chain. Furthermore, we demonstrate that it is degrading in alkaline conditions. To complete its suitability as a biocompatible material, cytotoxicity and cell uptake experiments were performed. We show that the polymer is nontoxic and that it is taken up in nanoparticular form via endocytosis processes into the cytoplasm of cells.

Defect engineering of polyethylene-like polyphosphoesters: solid-state NMR characterization and surface chemistry of anisotropic polymer nanoplatelets

Polyethylene-like polyphosphoesters crystallized from dilute solution into anisotropic nanoplatelets. As proven by solid-state NMR, the phosphate groups are expelled to the surface and on-surface chemistry was conducted leaving the crystals intact.