DNA aptasensor for the detection of ATP based on quantum dots electrochemiluminescence

Electrochemiluminescence of Semiconductor Quantum Dots and Its Biosensing Applications: A Comprehensive Review

Electrochemiluminescence (ECL) is the chemiluminescence triggered by electrochemical reactions. Due to the unique excitation mode and inherent low background, ECL has been a powerful analytical technique to be widely used in biosensing and imaging. As an emerging ECL luminophore, semiconductor quantum dots (QDs) have apparent advantages over traditional molecular luminophores in terms of luminescence efficiency and signal modulation ability. Therefore, the development of an efficient ECL system with QDs as luminophores is of great significance to improve the sensitivity and detection flux of ECL biosensors. In this review, we give a comprehensive summary of recent advances in ECL using semiconductor QDs as luminophores. The luminescence process and ECL mechanism of semiconductor QDs with various coreactants are discussed first. Specifically, the influence of surface defects on ECL performance of semiconductor QDs is emphasized and several typical ECL enhancement strategies are summarized. Then, the applications of semiconductor QDs in ECL biosensing are overviewed, including immunoassay, nucleic acid analysis and the detection of small molecules. Finally, the challenges and prospects of semiconductor QDs as ECL luminophores in biosensing are featured.

An electrochemical aptasensor based on multi-walled carbon nanotubes loaded with PtCu nanoparticles as signal label for ultrasensitive detection of adenosine

Adenosine, as an endogenous nucleoside modulator, plays an important role in heart rate regulation, neurotransmission, and control of the respiratory system and thus it is significantly important to realize its sensitive detection. Herein, a highly sensitive electrochemical aptasensor for adenosine detection was proposed by using multi-walled carbon nanotubes (MWCNTs) as support matrix loading PtCu nanoparticles (PtCu-MWCNTs) to amplify signal. On one hand, disposable screen-printing gold electrodes (SPGEs) were used as superb sensing base to ensure the stable connection of aptamers 1 (ssDNA1). On the other hand, the PtCu-MWCNTs complex was synthesized through a one-pot method, which not only can precisely control the proportion of metal mass in the product but also exhibited superior electrocatalytic activity towards H₂O₂. The recognition reactions were achieved by stepwise incubation of ssDNA1, ssDNA2-PtCu-MWCNTs (denoted as ssDNA2-label), and adenosine on the SPGEs. As a result, the constructed electrochemical aptasensor exhibited a wide linear range from 10 nM to 1.0 μM with a low detection limit of 1.0 nM (S/N = 3) for adenosine detection. The aptasensor also successfully realized the adenosine detection in human serum samples, which means that the proposed aptasensor holds a potential application in point-of-care detection.

Advances in chilling injury of postharvest fruit and vegetable: Extracellular ATP aspects

Due to the global use of cold chain, the development of postharvest technology to reduce chilling injury (CI) in postharvest fruits and vegetables during storage and transport is needed urgently. Considerable evidence shows that maintaining intracellular adenosine triphosphate (iATP) in harvested fruits and vegetables is beneficial to inhibiting CI occurrence. Extracellular ATP (eATP) is a damage-associated signal molecule and plays an important role in CI of postharvest fruits and vegetables through its receptor and subsequent signal transduction under low-temperature stress. The development of new aptasensors for the simultaneous determination of eATP level allows for better understanding of the roles of eATP in a myriad of responses mediated by low-temperature stress in relation to the chilling tolerance of postharvest fruits and vegetables. The multiple biological functions of eATP and its receptors in postharvest fruits and vegetables were attributed to interactions with reactive oxygen species (ROS) and nitric oxide (NO) in coordination with phytohormones and other signaling molecules via downstream physiological activities. The complicated interconnection among eATP in relation to its receptors, eATP/iATP homeostasis, ROS, NO, and heat shock proteins triggered by eATP recognition has been emphasized. This paper reviews recent advances in the beneficial effects of energy handling, outlines the production and homeostasis of eATP, discusses the possible mechanism of eATP and its receptors in chilling tolerance, and provides future research directions for CI in postharvest fruits and vegetables during low-temperature storage.

A simple electrochemiluminesecence aptasenor using a GCE/NCQDs/aptamers for detection of Pb

An electrochemiluminescence (ECL) aptasensor was prepared to detect Pb²⁺ with nitrogen-doped carbon quantum dots (NCQDs) as ECL materials. To prepare the working electrode, NCQDs with carboxyl groups were loaded on a glassy carbon electrode (GCE) and then Pb²⁺ aptamers were covalently bound to the NCQDs to form a stable GCE/NCQDs/aptamers. On addition of Pb²⁺, the chain aptamers change to a pb²⁺ G-quadruplex conformation, which lead to a large decrease in the ECL intensity. The variation of intensity and the logarithm of the Pb²⁺ concentration had a good linear relationship (R² = 0.998). The detection range was wide (50 pM to 387.9 nM) with a low detection limit (18.9 pM). In interference experiments, the ECL Pb²⁺ aptasensor did not suffer from interference and it had good stability. The NCQDs ECL aptasensor can detect Pb²⁺ quickly and accurately, and provides a fast and efficient method for detection of Pb²⁺. Compared with literatures, the Pb²⁺ aptasensor has simpler preparation process, lower cost; furthermore, it is more environmentally friendly.

Recent achievements and advances in optical and electrochemical aptasensing detection of ATP based on quantum dots

The design and fabrication of high sensitive and selective biosensing platforms areessential goals to precisely recognize biomaterials in biological assays. In particular, determination of adenosine triphosphate (ATP) as the main energy currency of the cells and one of the most important biomolecules in living organisms is a pressing need in advanced biological detection. Recently, aptamer-based biosensors are introduced as a new direct strategy in which the aptamers (Apts) directly bind to the different targets and detect them on the basis of conformational changes and physical interactions. They can also be conjugated to optical and electronic probes such as quantum dot (QD) nanomaterials and provide unique QD aptasensing platforms. Currently, these Apt-based biosensors with excellent recognition features have attracted extensive attention due to the high specificity, rapid response and facile construction. Therefore, in this review article, recent achievements and advances in aptasensing detection of ATP based on different detection methods and types of QDs are discussed. In this regard, the optical and electrochemical aptasensors have been categorized based on detection methods; fluorescence (FL), electrochemiluminescence (ECL) and photoelectrochemical (PEC) and they have been also divided to two main groups based on QDs; metal-based (M-based) and carbon-based (C-based) materials. Then, their advantages and limitations have been highlighted, compared and discussed in detail.

Recent applications of quantum dots in optical and electrochemical aptasensing detection of Lysozyme

Lysozyme (Lyz) is a naturally occurring enzyme that operates against Gram-positive bacteria and leads to cell death. This antimicrobial enzyme forms the part of the innate defense system of nearly all animals and exists in their somatic discharges such as milk, tears, saliva and urine. Increased Lyz level in serum is an important indication of several severe diseases and so, precise diagnosis of Lyz is an urgent need in biosensing assays. Up to know, various traditional and modern techniques have been introduced for Lyz determination. Although the traditional methods suffer from some significant limitations such as time-consuming, arduous, biochemical screening, bacterial colony isolation, selective enrichment and requiring sophisticated instrumentation or isotope labeling, some new modern approaches like aptamer-based biosensors (aptasensors) and quantum dot (QD) nanomaterials are the main goal in Lyz detection. Electrochemical and optical sensors have been highlighted because of their adaptability and capability to decrease the drawbacks of common methods. Using an aptamer-based biosensor, sensor selectivity is enhanced due to the specific recognition of the analyte. Thereby, in this review article, the recent advances and achievements in electrochemical and optical aptasensing detection of Lyz based on different QD nanomaterials and detection methods have been discussed in detail.

Selective recognition of ATP by multivalent nano-assemblies of bisimidazolium amphiphiles through "turn-on" fluorescence response

Bisimidazolium receptors, tagged with chromophoric pyrene at one end and linked to an n-alkyl chain at the other, underwent self-assembly in aqueous media depending on the length of the alkyl segment. The amphiphilic derivatives having n-decyl or longer chains, formed nano-assemblies with cyanic-green emission resulting from the stacked pyrene chromophores in the aggregates. The presence of positive surface charges on the multivalent aggregates led to ATP binding which was accompanied by a significant increase in the excimeric emission intensity. This provided a convenient way of monitoring ATP binding in a "turn-on" mode and an efficient detection of ATP was achieved in aqueous buffer and also in buffer containing 150 mM NaCl at physiological pH value. Furthermore, the multivalent aggregates demonstrated a significant selectivity in ATP detection over ADP, AMP and pyrophosphate.

Exonuclease I-Assisted General Strategy to Convert Aptamer-Based Electrochemical Biosensors from "Signal-Off" to "Signal-On"

In terms of how the signal varies in response to increased concentration of an analyte, sensors can be classified as either "signal-on" or "signal-off" format. While both types hold potentials to be sensitive, selective, and reusable, in many situations "signal-on" sensors are preferred for their low background signal and better selectivity. In this study, with the detection of lysozyme using its DNA aptamer as a trial system, for the first time we demonstrated that such an aptamer-based electrochemical biosensor can be converted from intrinsically "signal-off" to "signal-on" with the aid of a DNA exonuclease. The fact that the stepwise cleavage of antilysozyme aptamer catalyzed by Exonuclease I (Exo I) is entirely inhibited upon binding lysozyme leads to the selective removal of unbound DNA probes (thiolate anti-lysozyme DNA aptamer strands immobilized on gold electrode) upon the introduction of Exo I to the sensor. With the aid of electrostatically bound redox cations ([Ru(NH₃)₆]³⁺), we were able to quantitate the number of aptamer strands that are bound with lysozymes via conventional cyclic voltammetry (CV) measurements. We demonstrated that Exo I-assisted signal-on conversion protocol not only improves the sensing performance (10 times better limit of detection) but also promises a versatile strategy for DNA-based biosensor design, i.e., it can be readily adapted to other aptamer-protein binding systems (thrombin, as another example).

Enhanced biosensing strategies using electrogenerated chemiluminescence: recent progress and future prospects

An overview of enhancement strategies for highly sensitive ECL-based sensing of bioanalytes enabling early detection of cancer.

Recent Advances in Electrochemiluminescence Sensors for Pathogenic Bacteria Detection

Pathogenic bacterial contamination greatly threats human health and safety. Rapidly biosensing pathogens in the early stage of infection would be helpful to choose the correct drug treatment, prevent transmission of pathogens, as well as decrease mortality and economic losses. Traditional techniques, such as polymerase chain reaction and enzyme-linked immunosorbent assay, are accurate and effective, but are greatly limited because they are complex and time-consuming. Electrochemiluminescence (ECL) biosensors combine the advantages of both electrochemical and photoluminescence analysis and are suitable for high sensitivity and simple pathogenic bacteria detection. In this review, we summarize recent advances in ECL sensors for pathogenic bacteria detection and highlight the development of paper-based ECL platforms in point of care diagnosis of pathogens.

Monitoring of dynamic ATP level changes by oligomycin-modulated ATP synthase inhibition in SW480 cancer cells using fluorescent "On-Off" switching DNA aptamer

Adenosine triphosphate (ATP) is the main energy source in cells and an important biomolecule participating in cellular reactions in living organisms. Since the ATP level changes dynamically reflecting the development of a debilitating disease or carcinogenesis, we have focused in this work on monitoring of the oligomycin (OMC)-modulated ATP synthase inhibition using a fluorescent-switching DNA aptamer designed for the detection of ATP (Apt(ATP)), as the model for studies of dynamic ATP level variation. The behavior of the ATP aptamer has been characterized using fluorescence spectroscopy. The Intramolecular fluorescence resonance energy transfer (iFRET) operates in the proposed aptamer from the FAM dye moiety to guanines of the aptamer G-quadruplex when the target ATP is present and binds to the aptamer changing its conformation. The iFRET process enables the detection of ATP down to the limit of detection, LOD = 17 μM, without resorting to any extra chemi-amplification schemes. The selectivity coefficients for relevant interferent triphosphates (UTP, GTP, and CTP) are low for the same concentration as that of ATP. We have demonstrated an efficient transfection of intact cells and OMC-treated SW480 colon cancer cells with Apt(ATP), using microscopic imaging, iFRET measurements, and cell viability testing with MTT method. The applicability of the switching DNA aptamer for the analysis of real samples, obtained by lysis of SW480 cells, was also tested. The proposed Apt(ATP) may be considered as a viable candidate for utilization in measurements of dynamic ATP level modulation in cells in different stages of cancer development and testing of new drugs in pharmacological studies.

Recent trends in electrochemiluminescence aptasensors and their applications

Aptamers are single stranded DNA or RNA ligands which can be selected for different targets from proteins to small organic dyes. In the past few years great progress has been accomplished in the development of aptamer based bioanalytical assays with different detection techniques. Among them, electrochemiluminescence (ECL) aptasensors are very promising because they have the advantages of both electrochemical and chemiluminescence biosensors, such as high sensitivity, low background, cost effectiveness, and ease of control. In this review, we summarize the recent efforts to construct novel and improved ECL aptasensors and their application.

A dual-channel homogeneous aptasensor combining colorimetric with electrochemical strategy for thrombin

In this protocol, a dual-channel homogeneous aptasenor was proposed for protein molecule determination, employing thrombin as target analyte. The colorimetric and electrochemical transducers were combined in a single analytical system for signal readout. In this dual-channel sensing strategy, the G-quadruplex sequence was released and incorporated with hemin to form DNAzyme for naked-eye colorimetric detection. Meanwhile, the hydroxyapatite nanoparticle as signal probe was combined with magnetic nanoparticles to construct sandwich-type structure for generating the electrochemical current when thrombin was present in solution. By introducing two kinds of reporter probes and transducers, this dual-channel sensor produced two different kinds of signal to improve the analytical accuracy and diversity. The results revealed that the dual-channel sensor achieved the quantatitive determination of thrombin with low limit of detection (0.40 fM) and wide range (0.1 fM to 1 nM), which offer a promise for rapid and accurate detection of biomolecule.

An ''off-on'' phosphorescent aptasensor switch for the detection of ATP

An "off-on" phosphorescent aptasensor based on the 3-mercaptopropionic acid (MPA) capped Mn-doped ZnS quantum dots (MPA-Mn:ZnS QDs)/aptamer hybrid system was developed to detect adenosine triphosphate (ATP) in biological fluids. The phosphorescence of MPA-Mn:ZnS QDs was obviously quenched when ATP aptamer was added due to the aggregation induced effect. ATP aptamer, adsorbed on the surface of the phosphorescent MPA-Mn:ZnS QDs, has a high affinity for ATP. And then, with the addition of ATP, phosphorescence was gradually recovered because of the stronger special binding interaction between ATP and ATP aptamer than that between QDs and ATP aptamer. In this case, a high sensitivity and selectivity of phosphorescent aptasensor for the detection of ATP has constructed with a low detection limit of 0.9 nM and a wide linear range from 2 nM to 9 µM. What's more, the phosphorescent aptasensor does not require complex pretreatments and can effectively eliminate the interference from auto fluorescence and scattering light.

An ATP Aptasensor Based on the Peroxidase-like Activity of Hemin/Graphene Oxide Nanosheets

In the present work, a sensitive electrochemical aptasensor was designed for the detection of adenosine triphosphate (ATP) with hemin/graphene oxide nanosheets (HGNs). Firstly, the ATP aptamer was self-assembled on gold electrode surface, and then HGNs were captured to the modified electrode by π-π stacking. The captured HGNs could catalyze the disproportionation reaction of H2O2, and produced a detectable electrochemical signal by chronoamperometry. ATP was competitively bound to aptamer which led to the release of HGNs from the electrode surface after adding ATP. The decrease of the electrochemical signal, which was calculated by the difference of amperometric responses before and after incubation of ATP, provided a quantitative signal for ATP detection. A linear correlation was achieved between the difference of the amperometric responses and the logarithmic concentration of ATP ranging from 0.5 to 100 nM with a detection limit of 0.08 nM. Besides, the aptasensor also exhibited good selectivity toward ATP against other analogs.

Advances in the design of nanomaterial-based electrochemical affinity and enzymatic biosensors for metabolic biomarkers: A review

This review (with 340 refs) focuses on methods for specific and sensitive detection of metabolites for diagnostic purposes, with particular emphasis on electrochemical nanomaterial-based sensors. It also covers novel candidate metabolites as potential biomarkers for diseases such as neurodegenerative diseases, autism spectrum disorder and hepatitis. Following an introduction into the field of metabolic biomarkers, a first major section classifies electrochemical biosensors according to the bioreceptor type (enzymatic, immuno, apta and peptide based sensors). A next section covers applications of nanomaterials in electrochemical biosensing (with subsections on the classification of nanomaterials, electrochemical approaches for signal generation and amplification using nanomaterials, and on nanomaterials as tags). A next large sections treats candidate metabolic biomarkers for diagnosis of diseases (in the context with metabolomics), with subsections on biomarkers for neurodegenerative diseases, autism spectrum disorder and hepatitis. The Conclusion addresses current challenges and future perspectives. Graphical abstract This review focuses on the recent developments in electrochemical biosensors based on the use of nanomaterials for the detection of metabolic biomarkers. It covers the critical metabolites for some diseases such as neurodegenerative diseases, autism spectrum disorder and hepatitis.

One-step, visual and sensitive detection of phorate in blood based on a DNA–AgNC aptasensor

A one-step, visual and sensitive aptasensor based on DNA–AgNCs can be used to detect phorate in blood.

Steric paper based ratio-type electrochemical biosensor with hollow-channel for sensitive detection of Zn2

The construction of flexible platform possessing the functions of immobilizing, separating, rinsing, and high-throughput analysis plays a significant role in biological and clinical research. Herein, hollow-channel technique was integrated with lab-on-paper for the simultaneous determination of two different concentrations of Zn²⁺ based on the origami principle, in which microfluidic channels were first patterned on a cellulose paper using commercial solid-state wax printer. Hollow-channels were created by laser cutting method as the role of both injecting ending and reaction tank. After screen printing three electrodes system, the resulting planar paper sheets were then folded into steric structures and functionalized by in-situ synthesized reduced graphene oxide. As a proof-of-concept, such lab-on-paper device was employed in the ratiometric electrochemical monitoring of zinc ion from the environment and HepG2 cells extract, by combining with co-catalysis of porous metal-organic frameworks and hemin/G-quadruplex toward H₂O₂ in the linear range of 0.1-7,000nmol/L. The results indicated that integrating hollow-channel with steric lab-on-paper offered a new methodological approach for the development of metal ions monitoring research. It is believed that it could be useful for various point-of-care related research fields, such as, on-site environmental monitoring, food safety, and disease diagnosis.

Aptamer-Modified Semiconductor Quantum Dots for Biosensing Applications

Semiconductor quantum dots have attracted extensive interest in the biosensing area because of their properties, such as narrow and symmetric emission with tunable colors, high quantum yield, high stability and controllable morphology. The introduction of various reactive functional groups on the surface of semiconductor quantum dots allows one to conjugate a spectrum of ligands, antibodies, peptides, or nucleic acids for broader and smarter applications. Among these ligands, aptamers exhibit many advantages including small size, high chemical stability, simple synthesis with high batch-to-batch consistency and convenient modification. More importantly, it is easy to introduce nucleic acid amplification strategies and/or nanomaterials to improve the sensitivity of aptamer-based sensing systems. Therefore, the combination of semiconductor quantum dots and aptamers brings more opportunities in bioanalysis. Here we summarize recent advances on aptamer-functionalized semiconductor quantum dots in biosensing applications. Firstly, we discuss the properties and structure of semiconductor quantum dots and aptamers. Then, the applications of biosensors based on aptamer-modified semiconductor quantum dots by different signal transducing mechanisms, including optical, electrochemical and electrogenerated chemiluminescence approaches, is discussed. Finally, our perspectives on the challenges and opportunities in this promising field are provided.

Progress and challenges in electrochemiluminescent aptasensors

The importance of developing new diagnostic and detection technologies for the growing number of sensing challenges is rising each year. Here, we present a comprehensive and concise review on electrochemiluminescent (ECL) aptasensors by putting special emphasis on its characteristic features, advances, challenges, and applications of ECL based aptasensors. ECL is an ideal tool for constructing such sensors because of its inherent characteristics and can be easily integrated into aptamer based sensing platforms. This review summarizes the "synergistic benefits" of ECL aptamer-based sensors; classifications of ECL aptamer-based assay designs, and signal amplification strategies. This critical review highlights the effects of integration of nanomaterials, immobilization techniques, and amplification/detection strategies on the analytical performance of ECL based aptasensors. Moreover, several proof-of-concepts with appropriate figures and explanations have been shown to provide a general guide for the design of ECL aptasensors, and to stimulate further application of these ECL aptasensors. Finally, we conclude with the remaining challenges and opportunities to inspire further developments in ECL aptasensors.

Hybridization chain reaction-based colorimetric aptasensor of adenosine 5'-triphosphate on unmodified gold nanoparticles and two label-free hairpin probes

This work designs a new label-free aptasensor for the colorimetric determination of small molecules (adenosine 5'-triphosphate, ATP) by using visible gold nanoparticles as the signal-generation tags, based on target-triggered hybridization chain reaction (HCR) between two hairpin DNA probes. The assay is carried out referring to the change in the color/absorbance by salt-induced aggregation of gold nanoparticles after the interaction with hairpins, gold nanoparticles and ATP. To construct such an assay system, two hairpin DNA probes with a short single-stranded DNA at the sticky end are utilized for interaction with gold nanoparticles. In the absence of target ATP, the hairpin DNA probes can prevent gold nanoparticles from the salt-induced aggregation through the interaction of the single-stranded DNA at the sticky end with gold nanoparticles. Upon target ATP introduction, the aptamer-based hairpin probe is opened to expose a new sticky end for the strand-displacement reaction with another complementary hairpin, thus resulting in the decreasing single-stranded DNA because of the consumption of hairpins. In this case, gold nanoparticles are uncovered owing to the formation of double-stranded DNA, which causes their aggregation upon addition of the salt, thereby leading to the change in the red-to-blue color. Under the optimal conditions, the HCR-based colorimetric assay presents good visible color or absorbance responses for the determination of target ATP at a concentration as low as 1.0nM. Importantly, the methodology can be further extended to quantitatively or qualitatively monitor other small molecules or biotoxins by changing the sequence of the corresponding aptamer.

Visual and Plasmon Resonance Absorption Sensor for Adenosine Triphosphate Based on the High Affinity between Phosphate and Zr(IV)

Zr(IV) can form phosphate and Zr(IV) (-PO₃^2--Zr⁴⁺-) complex owing to the high affinity between Zr(IV) with phosphate. Zr(IV) can induce the aggregation of gold nanoparticles (AuNPs), while adenosine triphosphate(ATP) can prevent Zr(IV)-induced aggregation of AuNPs. Herein, a visual and plasmon resonance absorption (PRA)sensor for ATP have been developed using AuNPs based on the high affinity between Zr(IV)with ATP. AuNPs get aggregated in the presence of certain concentrations of Zr(IV). After the addition of ATP, ATP reacts with Zr(IV) and prevents AuNPs from aggregation, enabling the detection of ATP. Because of the fast interaction of ATP with Zr(IV), ATP can be detected with a detection limit of 0.5 μM within 2 min by the naked eye. Moreover, ATP can be detected by the PRA technique with higher sensitivity. The A_520nm/A_650nm values in PRA spectra increase linearly with the concentrations of ATP from 0.1 μM to 15 μM (r = 0.9945) with a detection limit of 28 nM. The proposed visual and PRA sensor exhibit good selectivity against adenosine, adenosine monophosphate, guanosine triphosphate, cytidine triphosphate and uridine triphosphate. The recoveries for the analysis of ATP in synthetic samples range from 95.3% to 102.0%. Therefore, the proposed novel sensor for ATP is promising for real-time or on-site detection of ATP.

Proximity Binding and Metal Ion-Dependent DNAzyme Cyclic Amplification-Integrated Aptasensor for Label-Free and Sensitive Electrochemical Detection of Thrombin

Thrombin plays important roles for the diagnosis of neurodegenerative and cardiovascular diseases. By integrating proximity binding-induced strand displacement and metal ion-dependent DNAzyme recycling amplification, we demonstrate here the development of a simple and sensitive strategy for the detection of thrombin in human serums. The binding of the two distinct aptamers to the thrombin targets increases the local concentration of the aptamers and facilitates the release of the enzymatic sequences through proximity binding-induced strand displacement. The liberated enzymatic sequences further hybridize with the G-quadruplex containing and hairpin-structured substrate sequences on the sensor electrode to form the metal-ion dependent DNAzymes. Subsequently, the metal ions catalyze the cleavage of the substrate sequences to unlock the G-quadruplex forming sequences and to release the enzymatic sequences to trigger another cleavage cycle. Such metal ion-dependent DNAzyme recycling amplification leads to the formation of many active G-quadruplex forming sequences, which associate with hemin to form G-quadruplex/hemin complexes on the electrode surface. Direct electron transfer of hemin to the electrode during the potential scan can thus generate significantly amplified current for sensitive detection of thrombin at the low picomolar level. The work demonstrated here can thus offer new opportunities for the development of convenient signal amplification strategies for detecting various protein targets.

DNA-stabilized silver nanoclusters and carbon nanoparticles oxide: A sensitive platform for label-free fluorescence turn-on detection of HIV-DNA sequences

Based on the remarkable difference between the interactions of carbon nanoparticles (CNPs) oxide with single-stranded DNA (ssDNA) and double-stranded DNA (dsDNA), and the fact that fluorescence of DNA-stabilized silver nanoclusters (AgNCs) can be quenched by CNPs oxide, DNA-functionalized AgNCs were applied as label-free fluorescence probes and a novel fluorescence resonance energy transfer (FRET) sensor was successfully constructed for the detection of human immunodeficiency virus (HIV) DNA sequences. CNPs oxide were prepared with the oxidation of candle soot, hence it is simple, time-saving and low-cost. The strategy of dual AgNCs probes was applied to improve the detection sensitivity by using dual- probe capturing the same target DNA in a sandwich mode and as the fluorescence donor, and using CNPs oxide as the acceptor. In the presence of target DNA, a dsDNA hybrid forms, leading to the desorption of the ssDNA-AgNCs probes from CNPs oxide, and the recovering of fluorescence of the AgNCs in a HIV-DNA concentration-dependent manner. The results show that HIV-DNA can be detected in the range of 1-50nM with a detection limit of 0.40nM in aqueous buffer. The method is simple, rapid and sensitive with no need of labeled fluorescent probes, and moreover, the design of fluorescent dual-probe makes full use of the excellent fluorescence property of AgNCs and further improves the detection sensitivity.

A new electrochemical aptasensor based on a dual-signaling strategy and supersandwich assay

In this study, we develop a new electrochemical aptasensor by coupling two amplification strategies, including a dual signaling strategy and a supersandwich assay. In order to fabricate this aptasensor, a thiolated capture probe (CP) was first self-assembled on the gold electrode surface by Au-S bonds. After the addition of methylene blue (MB) modified signal probe 1 (SP1) and ferrocene (Fc) labeled signal probe 2 (SP2), supersandwich structure DNA, including multiple units of SP1 and SP2, was grown from the CP on the electrode surface. In the presence of ATP, the strong interaction between ATP and its aptamer (CP, SP1) leads to the disassembly of the supersandwich structure and thereby, the release of SP1 and SP2 from the gold electrode surface, resulting in a decrease of the MB and Fc signals. Taking "Signal gainMB + Signal gainFc" as the response signal, ATP can be detected sensitively; the detection limit is 2.1 nM, which is lower than that using either a single-signaling strategy or a traditional sandwich assay alone. Moreover, the new aptasensor also exhibits excellent specificity, selectivity, reliability and applicability. We believe that this new strategy will be helpful for fabricating sensitive and selective electrochemical aptasensors of other biomolecules and small molecules.

A sandwich dipstick assay for ATP detection based on split aptamer fragments

Aptamer-based strip assay is an easy, highly efficient and low-cost detection method, which has been developed and easily applied to onsite detection. A new sensitive sandwich dipstick assay for adenosine triphosphate (ATP) detection was successfully developed based on specific recognition between split aptamer fragments and the target. In this method, the thiolated aptamer was first conjugated to the surface of gold nanoparticles (AuNPs), while the biotin-aptamer was immobilized on the surface of a nitrocellulose filter in the test line. In the presence of ATP, the thiol-aptamer/ATP/biotin-aptamer complexes were generated, which led to an obvious increase in optical signals at the test line. Under the optimal determination conditions, an excellent linear logarithmic response to the ATP concentration was obtained within the range of 0.5 μM to 5 mM. The limit of detection (LOD) of 0.5 μM was reached at a signal-to-noise ratio of 3. The dipstick assay showed a good average recovery of 96-108 % with the RSD of less than 20 % in urine samples. The proposed method exhibited high specificity against other nucleotides such as the uridine triphosphate (UTP), cytidine triphosphate (CTP), and guanosine triphosphate (GTP). The results indicated that the dipstick strip may be considered as an inexpensive screening tool for onsite ATP determination. Graphical Abstract A simple split aptamer fragments based sandwich-type dipstick assay was developed for ATP detection.

Responsive hairpin DNA aptamer switch to program the strand displacement reaction for the enhanced electrochemical assay of ATP

A responsive hairpin DNA aptamer switch was ingeniously designed for enzyme-free, sensitive and selective electrochemical detection of ATP. It takes full advantage of the target-triggered liberation effect of the toehold region and the concomitant proximity effect with the branch-migration region to execute the toehold-mediated strand displacement reaction on the electrode surface.

A target responsive aptamer machine for label-free and sensitive non-enzymatic recycling amplification detection of ATP

Based on a new target-triggered aptamer molecular machine, a label-free and non-enzymatic target recycling amplification strategy for sensitive fluorescence detection of ATP in human serums is described. The presence of the target ATP together with the DNA fuel strand initiates the operation of the aptamer machine and leads to cyclic reuse of ATP and the release of many G-quadruplex sequences, which associate with a fluorescent dye to generate significantly amplified fluorescence signals to achieve sensitive detection of ATP.

Nanocrystal-based electrochemiluminescence sensor for cell detection with Au nanoparticles and isothermal circular double-assisted signal amplification

Here we have developed a sensitive cancer cell amplified detection method which combined Au NPs enhanced electrochemiluminescence (ECL) of CdS nanocrystals (NCs) film, with isothermal circular amplification reaction of polymerase. In DNA circular amplification detection system, hairpin DNA beacon/Au NPs composite modified CdS NCs film was used as an ECL emitter. Messenger DNA is hybridized with the aptamer modified on magnetic beads (MBs) to form MB-Au bioconjugates. In the presence of HL-60 cell, the aptamer would conjugate with the glycoprotein at cell surface and messenger DNA sequence would be released. The released messenger DNA sequence was then introduced into the cycle amplification system to trigger circular polymerizations. This assay allows us to determine the released messenger DNA equivalent to 10 cells and exhibits a significant specificity for HL-60 cells.

Facile fabrication of a three-dimensional gold nanowire array for high-performance electrochemical sensing

A three-dimensional gold nanowire array (3D GNA) was successfully prepared with a facile template-assisted approach, in order to construct an ultrasensitive electrochemical biosensor.

Identification of the target binding site of ethanolamine-binding aptamers and its exploitation for ethanolamine detection

Aptamers are promising recognition elements for sensitive and specific detection of small molecules. We have previously selected ssDNA aptamers for ethanolamine, one of the smallest aptamer targets so far. The work presented here focuses on the determination of the binding region within the aptamer structure and its exploitation for the development of an aptamer-based assay for detection of ethanolamine. Sequence analysis of the aptamers resulted in the identification of a G-rich consensus sequence, which was able to fold in a typical two- or three-layered G-quartet structure. Experiments with stepwise truncated variants of the aptamers revealed that the consensus sequence is responsible and sufficient for binding to the target. On the basis of the knowledge of the aptamers binding site, we developed an aptamer-based microarray assay relying on competition between ethanolamine and an oligonucleotide complementary to the consensus sequence. Competitive binding of ethanolamine and fluorescently labeled complementary oligonucleotides resulted in fluorescence intensities dependent on ethanolamine concentration with a limit of detection of 10 pM. This method enables detection of small molecules without any labeling of analytes. The competitive assay could potentially be transferred to other aptamers and thus provides a promising system for aptamer-based detection of diverse small molecules.

A sensitive electrochemical aptasensor based on palladium nanoparticles decorated graphene-molybdenum disulfide flower-like nanocomposites and enzymatic signal amplification

In the present study, with the aggregated advantages of graphene and molybdenum disulfide (MoS2), we prepared poly(diallyldimethylammonium chloride)-graphene/molybdenum disulfide (PDDA-G-MoS2) nanocomposites with flower-like structure, large surface area and excellent conductivity. Furthermore, an advanced sandwich-type electrochemical assay for sensitive detection of thrombin (TB) was fabricated using palladium nanoparticles decorated PDDA-G-MoS2 (PdNPs/PDDA-G-MoS2) as nanocarriers, which were functionalized by hemin/G-quadruplex, glucose oxidase (GOD), and toluidine blue (Tb) as redox probes. The signal amplification strategy was achieved as follows: Firstly, the immobilized GOD could effectively catalyze the oxidation of glucose to gluconolactone, coupling with the reduction of the dissolved oxygen to H2O2. Then, both PdNPs and hemin/G-quadruplex acting as hydrogen peroxide (HRP)-mimicking enzyme could further catalyze the reduction of H2O2, resulting in significant electrochemical signal amplification. So the proposed aptasensor showed high sensitivity with a wide dynamic linear range of 0.0001 to 40 nM and a relatively low detection limit of 0.062 pM for TB determination. The strategy showed huge potential of application in protein detection and disease diagnosis.

An improved G-quadruplex DNAzyme for dual-functional electrochemical biosensing of adenosines and hydrogen peroxide from cancer cells

A dual-functional electrochemical biosensor for adenosines and hydrogen peroxide from cancer cells was developed based on a traditional switchable electrochemical sensing format and ATP improved G-quadruplex DNAzyme as a biolabel.

"Off-on" electrochemiluminescence system for sensitive detection of ATP via target-induced structure switching

An "off-on" electrochemiluminescence (ECL) strategy was constructed for highly sensitive and selective detection of adenosine 5'-triphosphate (ATP) with a quantum dots (QDs) modified electrode and a DNAzyme signal probe. The immobilized QDs were functionalized with a DNA sequence (DNA1) and then aptamer for recognition of target analyte. The signal probe was prepared by assembling another DNA sequence (DNA2) and G-quadruplex on gold nanoparticle via Au-S chemistry, which was used to bind the probe to electrode surface through a hybridization reaction with aptamer and hemin for forming G-quadruplex/hemin DNAzyme, respectively. Upon the sandwich hybridization of DNA1-aptamer-DNA2, the signal probe could be captured on the aptasensor to catalyze the reduction of dissolved oxygen, the coreactant for cathodic ECL emission of QDs, leading to a decrease of ECL intensity and thus the "off" state. In the presence of target, its recognition by aptamer led to the release of aptamer from electrode surface and decreased the amount of captured signal probe, thus the ECL emission was in its "on" state. The "off-on" strategy resulted from the target-induced structure switching could be used for specific detection of ATP with a linear range of 8-2000 nM and a detection limit of 7.6 nM. The proposed aptasensor could be successfully applied in the ECL detection of ATP in human serum. This method could resist environmental interfering agents and be extended for sensitive and reliable detection of a wide range of analytes in complex sample.

Electrochemical monitoring systems of demembranated flagellate algal motility for ATP sensing

The ATP-induced behavior of the unicellular flagellate alga Chlamydomonas reinhardtii was recorded as changes in the redox currents for a coexisting redox marker. The ATP concentration was estimated using the presented compact electrochemical system, which is based on monitoring of the motility of the flagellates.

Exonuclease I aided enzyme-linked aptamer assay for small-molecule detection

A novel enzyme-linked aptamer assay (ELAA) with the aid of Exonuclease I (Exo I) for colorimetric detection of small molecules was developed. The fluorescein isothiocyanate (FITC)-labeled aptamer was integrated into a double-stranded DNA (dsDNA). In the presence of target, the binding of aptamer with target protected the aptamer from Exo I degradation, which resulted in the FITC tag remaining on the aptamer. Then, the anti-FITC-HRP conjugate was used to produce an optically observable signal. By monitoring the color change, we were able to detect two model molecules, ATP and L-argininamide, with high selectivity and high sensitivity even in the serum matrix. It is expected to be a simple and general ELAA method with wide applicability.