Electrostatic interactions between diffuse soft multi-layered (bio)particles: beyond Debye-Hückel approximation and Deryagin formulation

Physicochemical surface properties of Chlorella vulgaris: a multiscale assessment, from electrokinetic and proton uptake descriptors to intermolecular adhesion forces

Given the growing scientific and industrial interests in green microalgae, a comprehensive understanding of the forces controlling the colloidal stability of these bioparticles and their interactions with surrounding aqueous microenvironment is required. Accordingly, we addressed here the electrostatic and hydrophobic surface properties of Chlorella vulgaris from the population down to the individual cell levels. We first investigated the organisation of the electrical double layer at microalgae surfaces on the basis of electrophoresis measurements. Interpretation of the results beyond zeta-potential framework underlined the need to account for both the hydrodynamic softness of the algae cells and the heterogeneity of their interface formed with the outer electrolyte solution. We further explored the nature of the structural charge carriers at microalgae interfaces through potentiometric proton titrations. Extraction of the electrostatic descriptors of interest from such data was obscured by cell physiology processes and dependence thereof on prevailing measurement conditions, which includes light, temperature and medium salinity. As an alternative, cell electrostatics was successfully evaluated at the cellular level upon mapping the molecular interactions at stake between (positively and negatively) charged atomic force microscopy tips and algal surface via chemical force microscopy. A thorough comparison between charge-dependent tip-to-algae surface adhesion and hydrophobicity level of microalgae surface evidenced that the contribution of electrostatics to the overall interaction pattern is largest, and that the electrostatic/hydrophobic balance can be largely modulated by pH. Overall, the combination of multiscale physicochemical approaches allowed a drawing of some of the key biosurface properties that govern microalgae cell-cell and cell-surface interactions.

Biomacromolecular and Toxicity Responses of Bacteria upon the Nano-Bio Interfacial Interactions with Ti3C2Tx Nanosheets

The biomolecular responses of bacteria to 2D nanosheets that result from nano-bio interfacial interactions remain to be thoroughly examined. Herein, Fourier transform infrared (FTIR) multivariate and 2D correlation analyses were performed to assess the composition and conformational changes in bacterial biomacromolecules (lipids, polysaccharides, and carbohydrates) upon exposure to Ti3C2Tx nanosheets. General toxicity assays, 3D excitation-emission matrix fluorescence analyses, extended Derjaguin-Landau-Verwey-Overbeek theory interaction calculations, and isothermal titration calorimetry were also performed. Our results demonstrate that Ti3C2Tx nanosheets considerably impact Gram-positive bacteria (Bacillus subtilis), causing oxidative damage and inactivation by preferentially interacting with and disrupting the cell walls. The bilayer membrane structure of Gram-negative bacteria (Escherichia coli) endows them with increased resistance to Ti3C2Tx nanosheets. The unmodified nanosheets had a higher affinity to bacterial protein components with lower toxicity due to their susceptibility to oxidation. Surface modification with KOH or hydrazine (HMH), particularly HMH, induced stronger dispersion, antioxidation, and affinity to bacterial phospholipids, which resulted in severe cell membrane lipid peroxidation and bacterial inactivation. These findings provide valuable insight into nano-bio interfacial interactions, which can facilitate the development of antimicrobial and antifouling surfaces and contribute to the evaluation of the environmental risks of nanomaterials.

Use of nanoparticle-coated bacteria for the bioremediation of organic pollution: A mini review

Nanoparticle (NP)-coated (immobilized) bacteria are an effective method for treating environmental pollution due to their multifarious benefits. This review collates a vast amount of existing literature on organic pollution treatment using NP-coated bacteria. We discuss the features of bacteria, NPs, and decoration techniques of NP-bacteria assemblies, with special attention given to the surface modification of NPs and connection mechanisms between NPs and cells. Furthermore, the performance of NP-coated bacteria was examined. We summarize the factors that affect bioremediation efficiency using coated bacteria, including pH, temperature, and agitation, and the possible mechanisms involving them are proposed. From future perspectives, suitable surface modification of NPs and wide application in real practice will make the NP-coated bacterial technology a viable treatment strategy.

Microalgae as Soft Permeable Particles

The colloidal stability of non-motile algal cells in water drives their distribution in space. An accurate description of the interfacial properties of microalgae is therefore critical to understand how microalgae concentrations can change in their biotope or during harvesting processes. Here, we probe the surface charges of three unicellular algae─Chlorella vulgaris, Nannochloropsis oculata, and Tetraselmis suecica─through their electrophoretic mobility. Ohshima's soft particle theory describes the electrokinetic properties of particles covered by a permeable polyelectrolyte layer, a usual case for biological particles. The results appear to fit the predictions of Ohshima's theory, proving that all three microalgae behave electrokinetically as soft particles. This allowed us to estimate two characteristic parameters of the polyelectrolyte external layer of microalgae: the volume charge density and the hydrodynamic penetration length. Results were compared with transmission electron microscopy observations of the algal cells' surfaces, and in particular of their extracellular polymeric layer, which was identified with the permeable shell evidenced by electrophoretic measurements. Noticeably, the algal surface potentials estimated from electrophoretic mobility using the soft particle theory are less negative than the apparent zeta potentials. This finding indicates that electrostatics are expected to play a minor role in phenomena of environmental and industrial importance, such as microalgae aggregation or adhesion.

Structural and electrostatic properties between pH-responsive polyelectrolyte brushes studied by augmented strong stretching theory

In this paper, we study electrostatic and structural properties between pH-responsive polyelectrolyte brushes by using a strong stretching theory accounting for excluded volume interactions, the density of polyelectrolyte chargeable sites and the Born energy difference between the inside and outside of the brush layer.In a free energy framework, we obtain self-consistent field equations to determine electrostatic properties between two pH-responsive polyelectrolyte brushes. We elucidate that in the region between two pH-responsive polyelectrolyte brushes, electrostatic potential at the centerline and osmotic pressure increase not only with excluded volume interaction, but also with density of chargeable sites on a polyelectrolyte molecule. Importantly, we clarify that when two pH-responsive polyelectrolyte brushes approach each other, the brush thickness becomes short and that a large excluded volume interaction and a large density of chargeable sites yield the enhanced contract of polyelectrolyte brushes. In addition, we also demonstrate how the influence of such quantities as pH, the number of Kuhn monomers, the density of charged sites, the lateral separation between adjacent polyelectrolyte brushes, Kuhn length on the electrostatic and structural properties between the two polyelectrolyte brushes is affected by the exclusion volume interaction. Finally, we investigate the influence of Born energy difference on the thickness of polyelectrolyte brushes and the osmotic pressure between two pH-responsive polyelectrolyte brushes.

The Suitability of Latex Particles to Evaluate Critical Process Parameters in Steric Exclusion Chromatography

The steric exclusion chromatography (SXC) is a rather new method for the purification of large biomolecules and biological nanoparticles based on the principles of precipitation. The mutual steric exclusion of a nonionic organic polymer, i.e., polyethylene glycol (PEG), induces target precipitation and leads to their retention on the chromatographic stationary phase. In this work, we investigated the application of latex particles in the SXC by altering the particle’s surface charge as well as the PEG concentration and correlated both with their aggregation behavior. The parameters of interest were offline precipitation kinetics, the product recovery and yield, and the chromatographic column blockage. Sulfated and hydroxylated polystyrene particles were first characterized concerning their aggregation behavior and charge in the presence of PEG and different pH conditions. Subsequently, the SXC performance was evaluated based on the preliminary tests. The studies showed (1) that the SXC process with latex particles was limited by aggregation and pore blockage, while (2) not the aggregate size itself, but rather the aggregation kinetics dominated the recoveries, and (3) functionalized polystyrene particles were only suitable to a limited extent to represent biological nanoparticles of comparable size and charge.

Optimizing the synthesis and purification of MS2 virus like particles

Introducing bacteriophage MS2 virus-like particles (VLPs) as gene and drug delivery tools increases the demand for optimizing their production and purification procedure. PEG precipitation method is used efficiently to purify VLPs, while the effects of pH and different electrolytes on the stability, size, and homogeneity of purified MS2 VLPs, and the encapsulated RNA sequences remained to be elucidated. In this regard, a vector, capable of producing VLP with an shRNA packed inside was prepared. The resulting VLPs in different buffers/solutions were assessed for their size, polydispersity index, and ability to protect the enclosed shRNA. We report that among Tris, HEPES, and PBS, with or without NaNO3, and also NaNO3 alone in different pH and ionic concentrations, the 100 mM NaNO3-Tris buffer with pH:8 can be used as a new and optimal MS2 VLP production buffer, capable of inhibiting the VLPs aggregation. These VLPs show a size range of 27-30 nm and suitable homogeneity with minimum 12-month stability at 4 °C. Moreover, the resulting MS2 VLPs were highly efficient and stable for at least 48 h in conditions similar to in vivo. These features of MS2 VLPs produced in the newly introduced buffer make them an appropriate candidate for therapeutic agents' delivery.

Chemodynamic features of nanoparticles: Application to understanding the dynamic life cycle of SARS-CoV-2 in aerosols and aqueous biointerfacial zones

We review concepts involved in describing the chemodynamic features of nanoparticles and apply the framework to gain physicochemical insights into interactions between SARS-CoV-2 virions and airborne particulate matter (PM). Our analysis is highly pertinent given that the World Health Organisation acknowledges that SARS-CoV-2 may be transmitted by respiratory droplets, and the US Center for Disease Control and Prevention recognises that airborne transmission of SARS-CoV-2 can occur. In our theoretical treatment, the virion is assimilated to a core-shell nanoparticle, and contributions of various interaction energies to the virion-PM association (electrostatic, hydrophobic, London-van der Waals, etc.) are generically included. We review the limited available literature on the physicochemical features of the SARS-CoV-2 virion and identify knowledge gaps. Despite the lack of quantitative data, our conceptual framework qualitatively predicts that virion-PM entities are largely able to maintain equilibrium on the timescale of their diffusion towards the host cell surface. Comparison of the relevant mass transport coefficients reveals that virion biointernalization demand by alveolar host cells may be greater than the diffusive supply. Under such conditions both the free and PM-sorbed virions may contribute to the transmitted dose. This result points to the potential for PM to serve as a shuttle for delivery of virions to host cell targets. Thus, our critical review reveals that the chemodynamics of virion-PM interactions may play a crucial role in the transmission of COVID-19, and provides a sound basis for explaining reported correlations between episodes of air pollution and outbreaks of COVID-19.

Virus Isoelectric Point Estimation: Theories and Methods

Much of virus fate, both in the environment and in physical/chemical treatment, is dependent on electrostatic interactions. Developing an accurate means of predicting virion isoelectric point (pI) would help to understand and anticipate virus fate and transport, especially for viruses that are not readily propagated in the lab. One simple approach to predicting pI estimates the pH at which the sum of charges from ionizable amino acids in capsid proteins approaches zero. However, predicted pIs based on capsid charges frequently deviate by several pH units from empirically measured pIs. Recently, the discrepancy between empirical and predicted pI was attributed to the electrostatic neutralization of predictable polynucleotide-binding regions (PBRs) of the capsid interior. In this paper, we review models presupposing (i) the influence of the viral polynucleotide on surface charge or (ii) the contribution of only exterior residues to surface charge. We then compare these models to the approach of excluding only PBRs and hypothesize a conceptual electrostatic model that aligns with this approach. The PBR exclusion method outperformed methods based on three-dimensional (3D) structure and accounted for major discrepancies in predicted pIs without adversely affecting pI prediction for a diverse range of viruses. In addition, the PBR exclusion method was determined to be the best available method for predicting virus pI, since (i) PBRs are predicted independently of the impact on pI, (ii) PBR prediction relies on proteome sequences rather than detailed structural models, and (iii) PBR exclusion was successfully demonstrated on a diverse set of viruses. These models apply to nonenveloped viruses only. A similar model for enveloped viruses is complicated by a lack of data on enveloped virus pI, as well as uncertainties regarding the influence of the phospholipid envelope on charge and ion gradients.

Improved Virus Isoelectric Point Estimation by Exclusion of Known and Predicted Genome-Binding Regions

Knowledge of the isoelectric points (pIs) of viruses is beneficial for predicting virus behavior in environmental transport and physical/chemical treatment applications. However, the empirically measured pIs of many viruses have thus far defied simple explanation, let alone prediction, based on the ionizable amino acid composition of the virus capsid. Here, we suggest an approach for predicting the pI of nonenveloped viruses by excluding capsid regions that stabilize the virus polynucleotide via electrostatic interactions. This method was applied first to viruses with known polynucleotide-binding regions (PBRs) and/or three-dimensional (3D) structures. Then, PBRs were predicted in a group of 32 unique viral capsid proteome sequences via conserved structures and sequence motifs. Removing predicted PBRs resulted in a significantly better fit to empirical pI values. After modification, mean differences between theoretical and empirical pI values were reduced from 2.1 ± 2.4 to 0.1 ± 1.7 pH units.IMPORTANCE This model fits predicted pIs to empirical values for a diverse set of viruses. The results suggest that many previously reported discrepancies between theoretical and empirical virus pIs can be explained by coulombic neutralization of PBRs of the inner capsid. Given the diversity of virus capsid structures, this nonarbitrary, heuristic approach to predicting virus pI offers an effective alternative to a simplistic, one-size-fits-all charge model of the virion. The accurate, structure-based prediction of PBRs of the virus capsid employed here may also be of general interest to structural virologists.

Electrostatic Double-Layer Interaction at the Surface of Rough Cluster-Assembled Films: The Case of Nanostructured Zirconia

Here, we investigated the influence of the nanoscale surface morphology on the electrostatic double layer at corrugated surfaces in aqueous electrolytes. For this purpose, we have produced cluster-assembled nanostructured zirconium dioxide (ns-ZrO _x, x ≈ 2) films with controlled morphological properties by supersonic cluster beam deposition (SCBD) and measured the double-layer interaction by atomic force microscopy with colloidal probes. SCBD allowed tuning the characteristic widths of the corrugated interface (root-mean-square roughness, correlation length) across a wide range of values, matching the width of the electrostatic double layer (Debye length) and the typical size of nanocolloids (proteins, enzymes, and catalytic nanoparticles). To accurately characterize the surface charge density in the high-roughness regime, we have developed a two-exponential model of the electrostatic force that explicitly includes roughness and better accounts for the roughness-induced amplification of the interaction. We were then able to observe a marked reduction of the isoelectric point of ns-ZrO _x surfaces of increasing roughness. This result is in good agreement with our previous observations on cluster-assembled nanostructured titania films and demonstrates that the phenomenon is not limited to a specific material, but more generally depends on peculiar nanoscale morphological effects, related to the competition of the characteristic lengths of the system.

Efficient electrochemomechanical energy conversion in nanochannels grafted with end-charged polyelectrolyte brushes at medium and high salt concentration

We develop a theory to study the generation of the streaming potential and the resulting electrochemomechanical energy conversion (ECMEC) in the presence of pressure-driven transport in nanochannels grafted with end-charged polyelectrolyte (PE) brushes. Our theory gives a thermodynamically self-consistent coupled description of the PE-brush and the electrostatics of the electric double layer (EDL) induced by the PE charges. The end-charged brushes localize the maximum EDL charge density away from the wall, thereby enabling a larger magnitude of pressure-driven transport to stream the ions downstream. This effect is retarded by the drag force imparted by the brushes as well as by the enhanced electroosmotic transport in a direction opposite to the pressure-driven transport. An interplay of these three issues leads to highly non-trivial electrohydrodynamic transport that eventually allows us to converge on appropriate properties of the brushes (e.g., grafting density and the number of monomers) that lead to the generation of a significantly larger streaming potential and a much improved efficiency of the ECMEC as compared to the brush-free nanochannels particularly at medium and high salt concentrations.

Effect of ion partitioning on electrostatics of soft particles with volumetrically charged inner core coated with pH-regulated polyelectrolyte layer

The effect of ion partitioning on the electrostatics of a soft particle with a volumetrically charged core and a pH-dependent polyelectrolyte layer (PEL) is numerically investigated. It is observed that, whenever the ion partitioning is noticeable, the soft layer can be fully charged in a broader range of pH. Besides, a higher number density of the PEL functional groups and a lower charge density of the core result in a sharper dependence of the electric potential on the electrolyte pH. Briefly, we conclude that, since the PEL charge is dependent upon the concentration of the hydroxide/hydrogen ions, for the pH-regulated soft particles, the ion partitioning effect, as a phenomenon influencing the ionic distribution, can be a determinant factor. So taking the effect of the ion partitioning into consideration is strongly recommended for a more realistic description of the electrostatics of the pH-regulated soft particles.

Charge Properties of TiO2 Nanotubes in NaNO3 Aqueous Solution

Charging of material surfaces in aqueous electrolyte solutions is one of the most important processes in the interactions between biomaterials and surrounding tissue. Other than a biomaterial, titania nanotubes (TiO₂ NTs) represent a versatile material for numerous applications such as heavy metal adsorption or photocatalysis. In this article, the surface charge properties of titania NTs in NaNO₃ solution were investigated through electrophoretic mobility and polyelectrolyte colloid titration measuring techniques. In addition, we used high-resolution transmission electron microscopy imaging to determine the morphology of TiO₂ NTs. A theoretical model based on the classical density functional theory coupled with the charge regulation method in terms of mass action law was developed to understand the experimental data and to provide insights into charge properties at different physical conditions, namely, pH and NaNO₃ concentration. Two intrinsic protonation constants and surface site density have been obtained. The electrostatic properties of the system in terms of electrostatic potentials and ion distributions were calculated and discussed for various pH values. The model can quantitatively describe the titration curve as a function of pH for higher bulk salt concentrations and the difference in the equilibrium amount of charges between the inner and outer surfaces of TiO₂ NTs. Calculated counterion (NO₃^-) distributions show a pronounced decrease of NO₃^- ions for high bulk pH (both inside and outside TiO₂ NT) because of the strong electric field. With the decrease of bulk pH or the increase of the salt concentration, NO₃^- is able to accumulate near the TiO₂ NTs surfaces.

Ion size effect on electrostatic and electroosmotic properties in soft nanochannels with pH-dependent charge density

We report a theoretical study of the ion size effect on various properties in a soft nanochannel with pH-dependent charge density.

Interaction between two parallel plates covered with a polyelectrolyte brush layer in an electrolyte solution

An approximate analytic expression is derived for the interaction energy between two parallel plates covered with a polyelectrolyte brush layer in an electrolyte solution. The interaction energy has three components: electrostatic interaction energy between two brush layers before and after their contact, steric interaction energy between two brush layers after their contact, and the van der Waals interaction energy between the cores of the plates. It is shown that these three components are of the same order of magnitude and contribute equally to the total interaction energy between two polyelectrolyte-coated plates in an electrolyte solution. On the basis of Derjaguin's approximation, an approximate expression for the interaction energy between two spherical particles covered with polyelectrolyte brush layers is also derived.

Deciphering the aggregation mechanism of bacteria (Shewanella oneidensis MR1) in the presence of polyethyleneimine: Effects of the exopolymeric superstructure and polymer molecular weight

Aggregation tests between bacteria and Polyethyleneimine (PEI) of low (600g/mol) and high (750,000g/mol) molecular weight were performed in order to address the physico-chemical mechanisms underlying the interactions between cationic polymer and bacterial membranes. The selected strain, Schewanella oneidensis MR-1, produces a lipopolysaccharide (LPS) of various lengths depending on the growth conditions. Optical density, bioaggregate size, electrophoretic mobility measurements, TEM and AFM observations, and cell lysis tests (crystal violet release), were collected to describe the PEI-mediated aggregation of LPS-O-antigen-free and LPS-O-antigen-decorated bacteria. The results show that PEI of low molecular weight (600g/mol) fails to aggregate bacteria, whereas PEIs of higher molecular weight (60,000 and 750,000g/mol) lead to flocculation at low polymer concentrations. In addition, the LPS-O antigen bacterial superstructure is shown to act as a protective barrier, thus delaying the harmful effects of the cationic polymer. Despite this protection, the interaction of bacterial membranes with increasing concentrations of PEI leads to a series of deleterious processes including biosurface modification (peeling, membrane permeabilization and/or lysis), aggregation of bacterial cells, and complexation of PEI with both released biosurface fragments and cytoplasmic residues issued from lysis.

Electrostatic interaction of soft particles

Theories of the electrostatic interaction between two soft particles (i.e., particles covered with an ion-penetrable surface layer of polyelectrolytes) in an electrolyte solution are reviewed. Interactions of soft particles after contact of their surface layers are particularly discussed. Interaction in a salt-free medium and the discrete-charge effect are also treated.

Polyelectrolyte brushes: theory, modelling, synthesis and applications

Polyelectrolyte (PE) brushes are a special class of polymer brushes (PBs) containing charges. Polymer chains attain "brush"-like configuration when they are grafted or get localized at an interface (solid-fluid or liquid-fluid) with sufficiently close proximity between two-adjacent grafted polymer chains - such a proximity triggers a particular nature of interaction between the adjacent polymer molecules forcing them to stretch orthogonally to the grafting interface, instead of random-coil arrangement. In this review, we discuss the theory, synthesis, and applications of PE brushes. The theoretical discussion starts with the standard scaling concepts for polymer and PE brushes; following that, we shed light on the state of the art in continuum modelling approaches for polymer and PE brushes directed towards analysis beyond the scaling calculations. A special emphasis is laid in pinpointing the cases for which the PE electrostatic effects can be de-coupled from the PE entropic and excluded volume effects; such de-coupling is necessary to appropriately probe the complicated electrostatic effects arising from pH-dependent charging of the PE brushes and the use of these effects for driving liquid and ion transport at the interfaces covered with PE brushes. We also discuss the atomistic simulation approaches for polymer and PE brushes. Next we provide a detailed review of the existing approaches for the synthesis of polymer and PE brushes on interfaces, nanoparticles, and nanochannels, including mixed brushes and patterned brushes. Finally, we discuss some of the possible applications and future developments of polymer and PE brushes grafted on a variety of interfaces.

Electrostatics of soft charged interfaces with pH-dependent charge density: effect of consideration of appropriate hydrogen ion concentration distribution

Explicit consideration of hydrogen ion concentration for describing the electrostatics of grafted polyelectrolyte layers with pH-dependent charge density exhibits the necessity of considering a non-uniform depth dependent monomer distribution.

Effect of finite ion sizes in electric double layer mediated interaction force between two soft charged plates

A new theory quantifies the effect of finite ion size in osmotic pressure (Πosm) between two soft charged plates.

Al2O3/yttrium compound core–shell structure formation with burst nucleation: a process driven by electrostatic attraction and high surface energy

A partial wet chemical route has been developed, in which aluminium oxide (Al₂O₃) nanoparticles in a Y(NO₃)₃ solution are induced to form a core–shell-structured yttrium aluminum garnet (YAG) precursor based on a burst nucleation synthesis.

Electrodynamics of soft multilayered particles dispersions: dielectric permittivity and dynamic mobility

A theory is presented for the electrodynamics of dispersions of spherical soft multilayered (bio)particles consisting of a hard core surrounded by step-function or diffuse-like polymeric layers with distinct electrohydrodynamic and structural features.

Shell structure of natural rubber particles: evidence of chemical stratification by electrokinetics and cryo-TEM

The interfacial structure of natural rubber (NR) colloids is investigated by means of cryogenic transmission electron microscopy (cryo-TEM) and electrokinetics over a broad range of KNO3 electrolyte concentrations (4-300 mM) and pH values (1-8). The asymptotic plateau value reached by NR electrophoretic mobility (μ) in the thin double layer limit supports the presence of a soft (ion- and water-permeable) polyelectrolytic type of layer located at the periphery of the NR particles. This property is confirmed by the analysis of the electron density profile obtained from cryo-TEM that evidences a ∼2-4 nm thick corona surrounding the NR polyisoprene core. The dependence of μ on pH and salt concentration is further marked by a dramatic decrease of the point of zero electrophoretic mobility (PZM) from 3.6 to 0.8 with increasing electrolyte concentration in the range 4-300 mM. Using a recent theory for electrohydrodynamics of soft multilayered particles, this "anomalous" dependence of the PZM on electrolyte concentration is shown to be consistent with a radial organization of anionic and cationic groups across the peripheral NR structure. The NR electrokinetic response in the pH range 1-8 is indeed found to be equivalent to that of particles surrounded by a positively charged ∼3.5 nm thick layer (mean dissociation pK ∼ 4.2) supporting a thin and negatively charged outermost layer (0.6 nm in thickness, pK ∼ 0.7). Altogether, the strong dependence of the PZM on electrolyte concentration suggests that the electrostatic properties of the outer peripheral region of the NR shell are mediated by lipidic residues protruding from a shell containing a significant amount of protein-like charges. This proposed NR shell interfacial structure questions previously reported NR representations according to which the shell consists of either a fully mixed lipid-protein layer, or a layer of phospholipids residing exclusively beneath an outer proteic film.

Impact of the virus purification protocol on aggregation and electrokinetics of MS2 phages and corresponding virus-like particles

Previous experimental and theoretical studies have established that electrokinetic and aggregation properties of soft MS2 phages are not only governed by the physico-chemical features of their proteinaceous outer surface but are also significantly impacted by those of their inner RNA component (Dika et al. Appl. Environ. Microbiol., 2011, 14, 4939-4948). These conclusions contradict the recent findings of Nguyen et al. (Soft Matter, 2011, 7, 10449-10456) who reported identical electrokinetic and aggregation characteristics for MS2 and corresponding virus like particles (VLPs) that lack the internal RNA component. We demonstrate here that this contradiction originates from the different purification methods adopted prior to measurements. More generally, we show that stability and electrohydrodynamics of viruses differ according to purification by (i) dialysis, (ii) isopycnic centrifugation in the cesium chloride gradient, and (iii) precipitation using polyethylene glycol (PEG). Methods (i) and (iii) lead to aggregation of MS2 phages at pH ≤ 4 and pH ≤ 6 in 1-100 mM NaNO3 solutions, respectively, while under such conditions aggregation is not observed for MS2 and VLP suspensions prepared according to (ii). In addition, VLPs prepared following methods (i) and (iii) aggregate only at the isoelectric point (pH ~ 3-4) in 1 mM NaNO3 solution. Electrophoretic mobility data of stable MS2 and VLP particles were further examined using a recent formalism for electrokinetics of soft multilayered colloids. The analysis qualitatively shows how the purification protocol may affect either the outer particle surface properties and/or the inner particle content. Finally, the non-DLVO aggregation behavior of MS2 and VLPs purified via the above protocols is discussed in terms of the possible change in corresponding interparticular interactions.

Nanoscale roughness and morphology affect the IsoElectric Point of titania surfaces

We report on the systematic investigation of the role of surface nanoscale roughness and morphology on the charging behaviour of nanostructured titania (TiO2) surfaces in aqueous solutions. IsoElectric Points (IEPs) of surfaces have been characterized by direct measurement of the electrostatic double layer interactions between titania surfaces and the micrometer-sized spherical silica probe of an atomic force microscope in NaCl aqueous electrolyte. The use of a colloidal probe provides well-defined interaction geometry and allows effectively probing the overall effect of nanoscale morphology. By using supersonic cluster beam deposition to fabricate nanostructured titania films, we achieved a quantitative control over the surface morphological parameters. We performed a systematical exploration of the electrical double layer properties in different interaction regimes characterized by different ratios of characteristic nanometric lengths of the system: the surface rms roughness Rq, the correlation length ξ and the Debye length λD. We observed a remarkable reduction by several pH units of IEP on rough nanostructured surfaces, with respect to flat crystalline rutile TiO2. In order to explain the observed behavior of IEP, we consider the roughness-induced self-overlap of the electrical double layers as a potential source of deviation from the trend expected for flat surfaces.

Polyethyleneimine-mediated flocculation of Shewanella oneidensis MR-1: impacts of cell surface appendage and polymer concentration

In wastewater treatment plants, optimizing bacterial flocculation and bacterial sludge dewatering requires a detailed understanding of the concomitant biological and physico-chemical processes governing the action of flocculating agent on living cells. Here we investigate the interactions between polyethyleneimine (PEI, 60,000g/mol) and Shewanella oneidensis MR-1 lacking or not the lipopolysaccharide (LPS) O-antigen surface structure. Flocculation tests were performed on bacteria with/without LPS O-antigen after being exposed to 0-100mg/L PEI concentrations. Measurements of electrophoretic mobility and bacterial aggregates size were complemented by transmission electron micrographs and atomic force microscopy images. While low PEI concentrations (<20mg/L) lead to flocculation of both bare and LPS O-antigen-decorated bacterial strains, the lysis of bacterial membranes occurred at larger polymer concentrations for the latter, which highlights the protective role of LPS O-antigen against harmful PEI-mediated membrane alterations. Depending on polymer concentration, two types of bacterial aggregates are identified: one that solely integrates bacterial cells, and another that includes both cells and cell residues resulting from lysis (membrane and/or LPS fragments, and inner cell content materials). The latter is expected to significantly contribute to water entrapping in sludge and thus lower dewatering process efficiency.

Electrohydrodynamics of soft polyelectrolyte multilayers: point of zero-streaming current

We report a comprehensive formalism for the electrokinetics (streaming current, I(str)) at soft multilayered polyelectrolyte films. These assemblies generally consist of a succession of permeable diffuse layers that differ in charge density, thickness, and hydrodynamic softness. The model, which extends one that we recently reported for the electrokinetics of monolayered soft thin films (Langmuir 2010, 26, 18169-18181), is valid without any restriction in the number and thickness of layers, or in the degree of dissociation and density of ionizable groups they carry. It further covers the limiting cases of hard and free draining films and correctly compares to semianalytical expressions derived for I(str) under conditions where the Debye-Hückel approximation applies. The flexibility of the theory is illustrated by simulations of I(str) for a two-layer assembly of cationic and anionic polymers over a large range of pH values and electrolyte concentrations. On this basis, it is shown that the point of zero streaming current (PZSC) of soft multilayered interphases, defined by the pH value where I(str) = 0, generally depends on the concentration of the (indifferent) electrolyte. The magnitude and direction of the shift in PZSC with varying salinity are intrinsically governed by the dissymmetry in protolytic characteristics and density of dissociable groups within each layer constituting the film, together with the respective film thickness and hydrodynamic softness. The fundamental effects covered by the theory are illustrated by streaming current measurements performed on two practically relevant systems, a polyelectrolyte bilayer prepared from poly(ethylene imine) (PEI) and poly(acrylic acid) (PAA) and a polymer-cushioned (PEI) bilayer lipid membrane.