Analytical strategies for detecting nanoparticle-protein interactions

Revolutionizing Leishmaniasis Treatment with Cutting Edge Drug Delivery Systems and Nanovaccines: An Updated Review

Leishmaniasis, one of the most overlooked tropical diseases, is a life-threatening illness caused by the parasite Leishmania donovani that is prevalent in underdeveloped nations. Over 350 million individuals in more than 90 different nations worldwide are at risk of contracting the disease, which has a current fatality rate of 50 000 mortalities each year. The administration of liposomal Amp B, pentavalent antimonials, and miltefosine are still considered integral components of the chemotherapy regimen. Antileishmanial medications fail to treat leishmaniasis because of their numerous drawbacks. These include inadequate effectiveness, toxicity, undesired side effects, drug resistance, treatment duration, and cost. Consequently, there is a need to overcome the limitations of conventional therapeutics. Nanotechnology has demonstrated promising outcomes in addressing these issues because of its small size and distinctive characteristics, such as enhanced bioavailability, lower toxicity, biodegradability, and targeted drug delivery. This review is an effort to highlight the recent progress in various nanodrug delivery systems (nDDSs) over the past five years for treating leishmaniasis. Although the preclinical outcomes of nDDSs have shown promising treatment for leishmaniasis, further research is needed for their clinical translation. Advancement in three primary priority domains─molecular diagnostics, clinical investigation, and knowledge dissemination and standardization─is imperative to propel the leishmaniasis field toward translational outcomes.

A generic approach based on long-lifetime fluorophores for the assessment of protein binding to polymer nanoparticles by fluorescence anisotropy

Quantitation of protein-nanoparticle interactions is essential for the investigation of the protein corona around NPs in vivo and when using synthetic polymer nanoparticles as affinity reagents for selective protein recognition in vitro. Here, a method based on steady-state fluorescence anisotropy measurement is presented as a novel, separation-free tool for the assessment of protein-nanoparticle interactions. For this purpose, a long-lifetime luminescent Ru-complex is used for protein labelling, which exhibits low anisotropy when conjugated to the protein but displays high anisotropy when the proteins are bound to the much larger polymer nanoparticles. As a proof of concept, the interaction of lysozyme with poly(N-isopropylacrylamide-co-N-tert-butylacrylamide-co-acrylic acid) nanoparticles is studied, and fluorescence anisotropy measurements are used to establish the binding kinetics, binding isotherm and a competitive binding assay.

Albumin Retains Its Transport Function after Interaction with Cerium Dioxide Nanoparticles

The interaction of inorganic nanomaterials with biological fluids containing proteins can lead not only to the formation of a protein corona and thereby to a change in the biological activity of nanoparticles but also to a significant effect on the structural and functional properties of the biomolecules themselves. This work studied the interaction of nanoscale CeO2, the most versatile nanozyme, with human serum albumin (HSA). Fourier transform infrared spectroscopy, MALDI-TOF mass spectrometry, UV-vis spectroscopy, and fluorescence spectroscopy confirmed the formation of HSA-CeO2 nanoparticle conjugates. Changes in protein conformation, which depend on the concentration of both citrate-stabilized CeO2 nanoparticles and pristine CeO2 nanoparticles, did not affect albumin drug-binding sites and, accordingly, did not impair the HSA transport function. The results obtained shed light on the biological consequences of the CeO2 nanoparticles' entrance into the body, which should be taken into account when engineering nanobiomaterials to increase their efficiency and reduce the side effects.

Exploring the effect of surfactants on the interactions of manganese dioxide nanoparticles with biomolecules

Interactions of manganese dioxide nanoparticles (MnO2 NPs) with vital biomolecules namely deoxyribonucleic acid (DNA) and serum albumin (BSA) have been studied in association with different surfactants by using fluorescence (steady state, synchronous and 3D), UV-visible, resonance light scattering (RLS), dynamic light scattering (DLS), and sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE). The esterase activity of serum albumin was tested in associations with MnO2 NPs and surfactants. The antioxidant potential of prepared NPs was also evaluated (DPPH method). Gel electrophoresis was carried out to analyze the effect of MnO2 NPs and surfactants on DNA. Presence of CTAB, Tween 20, DTAB and Tween 80 enhanced nanoparticle-protein binding. Tween 20 based nanoparticle systems showed long-term stability and biocompatibility. The quenching of BSA fluorescence emission in presence of MnO2 NPs alone and along with Tween 20 revealed stronger association of nanoparticles with proteins. Enhancement in the esterase activity (BSA) was observed in the presence of Tween 20. Furthermore, radical scavenging activity showed highest antioxidant potential in presence of Tween 20. The enthalpy and entropy assessment for protein-NPs association showed the predominance of Vander Waals interactions and hydrogen bonding. The synchronous fluorescence analysis highlighted the involvement of tryptophan (Trp) in the MnO2 NPs-protein interactions. The study evaluates the influence of surfactant on the associations of MnO2 NPs with the essential biomolecules. The findings can be crucially utilized in designing biocompatible MnO2 formulations for long term applications.Communicated by Ramaswamy H. Sarma.

Selenium Nanoparticles Can Influence the Immune Response Due to Interactions with Antibodies and Modulation of the Physiological State of Granulocytes

Currently, selenium nanoparticles (SeNPs) are considered potential immunomodulatory agents and as targets for activity modulation are granulocytes, which have the most abundant population of immune blood cells. The present study aims to evaluate the cytotoxic effect and its effect on the functional responses of granulocytes. In addition to the intrinsic activity of SeNPs, we studied the activity of the combination of SeNPs and IgG antibodies. Using laser ablation and fragmentation, we obtained nanoparticles with an average size of 100 nm and a rather narrow size evolution. The resulting nanoparticles do not show acute toxicity to primary cultures of fibroblasts and hepatocytes, epithelial-like cell line L-929 and granulocyte-like culture of HL-60 at a concentration of 10⁹ NPs/mL. SeNPs at a concentration of 10¹⁰ NPs/mL reduced the viability of HL-60 cells by no more than 10% and did not affect the viability of the primary culture of mouse granulocytes, and did not have a genotoxic effect on progenitor cells. The addition of SeNPs can affect the production of reactive oxygen species (ROS) by mouse bone marrow granulocytes, modulate the proportion of granulocytes with calcium spikes and enhance fMLF-induced granulocytes degranulation. SeNPs can modulate the effect of IgG on the physiological responses of granulocytes. We studied the expression level of genes associated with inflammation and cell stress. SeNPs increase the expression of catalase, NF-κB, Xrcc5 and some others; antibodies enhance the effect of SeNPs, but IgG without SeNPs decreases the expression level of these genes. This fact can be explained by the interaction between SeNPs and IgG. It has been established that antibodies interact with SeNPs. We showed that antibodies bind to the surface of selenium nanoparticles and are present in aqueous solutions in a bound form from DLS methods, ultraviolet-visible spectroscopy, vibrational-rotational spectrometry, fluorescence spectrometry, and refractometry. At the same time, in a significant part of the antibodies, a partial change in the tertiary and secondary structure is observed. The data obtained will allow a better understanding of the principles of the interaction of immune cells with antibodies and SeNPs and, in the future, may serve to create a new generation of immunomodulators.

Designing Functional Bionanoconstructs for Effective In Vivo Targeting

The progress achieved over the last three decades in the field of bioconjugation has enabled the preparation of sophisticated nanomaterial–biomolecule conjugates, referred to herein as bionanoconstructs, for a multitude of applications including biosensing, diagnostics, and therapeutics. However, the development of bionanoconstructs for the active targeting of cells and cellular compartments, both in vitro and in vivo, is challenged by the lack of understanding of the mechanisms governing nanoscale recognition. In this review, we highlight fundamental obstacles in designing a successful bionanoconstruct, considering findings in the field of bionanointeractions. We argue that the biological recognition of bionanoconstructs is modulated not only by their molecular composition but also by the collective architecture presented upon their surface, and we discuss fundamental aspects of this surface architecture that are central to successful recognition, such as the mode of biomolecule conjugation and nanomaterial passivation. We also emphasize the need for thorough characterization of engineered bionanoconstructs and highlight the significance of population heterogeneity, which too presents a significant challenge in the interpretation of in vitro and in vivo results. Consideration of such issues together will better define the arena in which bioconjugation, in the future, will deliver functional and clinically relevant bionanoconstructs.

Fluorescent Labeling of Human Serum Albumin by Thiol-Cyanimide Addition and Its Application in the Fluorescence Quenching Method for Nanoparticle-Protein Interactions

A boron-dipyrromethene (BODIPY)-based fluorescent probe, BDP-CN, was synthesized in this work. It had a fluorescence emission maximum at 512 nm and a high quantum yield (48%). As evidenced by agarose gel electrophoresis and liquid chromatography-mass spectrometry, it could realize the fluorescent labeling of human serum albumin (HSA) through a thiol-cyanimide addition. Interestingly, f-HSA, defined as HSA labeled by BDP-CN, had an even higher quantum yield (77%). In addition, BDP-CN would not affect the secondary structure of HSA. Based on the successful formation of f-HSA, it was further applied to study the interactions with nanoparticles. The fluorescence quenching of f-HSA by dihydrolipoic acid-coated gold nanoclusters (DHLA-AuNCs) obeyed a dynamic mechanism, consistent with the intrinsic fluorescence quenching of HSA by DHLA-AuNCs. The association constant K_a between f-HSA and DHLA-AuNCs at 298 K was 1.5 × 10⁵ M^-1, which was the same order of magnitude as that between HSA and DHLA-AuNCs. Moreover, the interactions of f-HSA with glutathione-coated gold nanoclusters confirmed that the labeled fluorescence could replace the intrinsic fluorescence to monitor the interactions between proteins and nanoparticles. By this method, strong fluorescence ensures better stability and reproducibility, excitation at a longer wavelength reduces the damage to the proteins, and covalent conjugation with cysteine residues eliminates the inner filter effects to a great extent. Therefore, the strategy for the fluorescent labeling of HSA can be expanded to investigate a broad class of nanoparticle-protein interactions and inspire even more fluorescent labeling methods with organic dyes.

Physico-chemical characterization of kajjali, black sulphide of mercury, with respect to the role of sulfur in its formation and structure

BACKGROUND

Kajjali is used as a base for Ayurvedic herbo-mineral medicines. It is a combination of mercury with sulfur in varying proportions. The ratio of sulfur (S) added to mercury (Hg) directly relates to the therapeutic efficacy of the compound.

OBJECTIVE

To analyze the physico-chemical characteristics of samaguna gandhaka kajjali (Hg: S = 1:1) and shadaguna gandhaka kajjali (Hg: S = 1:6).

MATERIALS AND METHODS

X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy (XPS), Fourier transmission infrared spectroscopy, thermo-gravimetry analysis, and atomic absorption spectroscopy were applied to characterize each type of kajjali.

RESULTS

It was found that the particle size of the formed kajjali compound increases with a decrease in the mercury to sulfur ratio. The presence of excess sulfur does not change the surface oxidation states as revealed by the XPS analysis. No trace of mercury has been found in both samaguna gandhaka kajjali (SGK-1) and shadguna gandhaka kajjali (SGK-6), indicating a complete Hg reaction with S.

CONCLUSION

Kajjali simulates nanomaterial of the modern era and possesses therapeutic efficacy as mentioned in classical Ayurveda texts. Complete trituration of mercury and sulfur combination ends up with this kajjali formation incorporating the potency of nanotherapeutics.

Interaction of Differently Sized, Shaped, and Functionalized Silver and Gold Nanoparticles with Glycosylated versus Nonglycosylated Transferrin

Exposure of nanomaterials (NMs) to biological medium results in their direct interaction with biomolecules and the formation of a dynamic biomolecular layer known as the biomolecular corona. Despite numerous published data on nano-biointeractions, the role of protein glycosylation in the formation, characteristics, and fate of such nano-biocomplexes has been almost completely neglected, although most serum proteins are glycosylated. This study aimed to systematically investigate the differences in interaction of metallic NPs with glycosylated vs nonglycosylated transferrin. To reach this aim, we compared interaction mechanisms between differently sized, shaped, and surface-functionalized silver NMs and gold NMs to commercially available human transferrin (TRF), a glycosylated protein, and to its nonglycosylated recombinant form (ngTRF). Bovine serum albumin (BSA) was also included in the study for comparative purposes. Characterization of NMs was performed using transmission electron microscopy and dynamic and electrophoretic light scattering techniques. Fluorescence quenching and circular dichroism methods were used to evaluate protein binding constants on the nanosurface and conformational changes after the protein-NM interactions, respectively. Competitive binding of TRF, ngTRF, and BSA to the surface of different NMs was evaluated by separating them after extraction from protein corona by gel electrophoresis following quantification with a commercial protein assay. The results showed that the binding strength between NMs and transferrin and the changes in the secondary protein structure largely depend not only on NM physicochemical properties but also on the protein glycosylation status. Data gained by this study highlight the relevance of protein glycosylation for all future design, development, and efficacy and safety assessment of NMs.

Biomolecular interactions of ultrasmall metallic nanoparticles and nanoclusters

The use of nanoparticles (NPs) in biomedicine has made a gradual transition from proof-of-concept to clinical applications, with several NP types meeting regulatory approval or undergoing clinical trials. A new type of metallic nanostructures called ultrasmall nanoparticles (usNPs) and nanoclusters (NCs), while retaining essential properties of the larger (classical) NPs, have features common to bioactive proteins. This combination expands the potential use of usNPs and NCs to areas of diagnosis and therapy traditionally reserved for small-molecule medicine. Their distinctive physicochemical properties can lead to unique in vivo behaviors, including improved renal clearance and tumor distribution. Both the beneficial and potentially deleterious outcomes (cytotoxicity, inflammation) can, in principle, be controlled through a judicious choice of the nanocore shape and size, as well as the chemical ligands attached to the surface. At present, the ability to control the behavior of usNPs is limited, partly because advances are still needed in nanoengineering and chemical synthesis to manufacture and characterize ultrasmall nanostructures and partly because our understanding of their interactions in biological environments is incomplete. This review addresses the second limitation. We review experimental and computational methods currently available to understand molecular mechanisms, with particular attention to usNP-protein complexation, and highlight areas where further progress is needed. We discuss approaches that we find most promising to provide relevant molecular-level insight for designing usNPs with specific behaviors and pave the way to translational applications.

Identification of main influencing factors on the protein corona composition of PLGA and PLA nanoparticles

Poly(DL-lactic-co-glycolic acid) and poly(DL-lactic acid) are widely used for the preparation of nanoparticles due to favorable characteristics for medical use like biodegradability and controllable degradation behavior. The contact with different media like human plasma or serum leads to the formation of a protein corona that determines the NP's in vivo processing. In this study, the impact of surface end group identity, matrix polymer hydrophobicity, molecular weight, and incubation medium on the protein corona composition was evaluated. Corona proteins were quantified using Bradford assay, separated by SDS-PAGE, and identified via LC-MS/MS. The acquired data revealed that surface end group identity had the most profound effect on corona composition in both quantitative and qualitative terms. Regarding matrix polymer hydrophobicity, adsorption profiles on NP systems with similar physicochemical characteristics resembled each other. The molecular weight of the matrix polymers proved to impact quantity, but not quality of corona bound proteins. The corona of plasma incubated NP showed adsorption of incubation medium-specific proteins but resembled those of serum incubated NP in terms of protein function, average mass and isoelectric point. Overall, the NP physicochemical properties proved to be easily adjustable determining factors of protein corona formation in physiological environments.

Protein-nanoparticle interactions and a new insight

The study of protein-nanoparticle interactions provides knowledge about the bio-reactivity of nanoparticles, and creates a database of nanoparticles for applications in nanomedicine, nanodiagnosis, and nanotherapy. The problem arises when nanoparticles come in contact with physiological fluids such as plasma or serum, wherein they interact with the proteins (or other biomolecules). This interaction leads to the coating of proteins on the nanoparticle surface, mostly due to the electrostatic interaction, called 'corona'. These proteins are usually partially unfolded. The protein corona can deter nanoparticles from their targeted functionalities, such as drug/DNA delivery at the site and fluorescence tagging of diseased tissues. The protein corona also has many repercussions on cellular intake, inflammation, accumulation, degradation, and clearance of the nanoparticles from the body depending on the exposed part of the proteins. Hence, the protein-nanoparticle interaction and the configuration of the bound-proteins on the nanosurface need thorough investigation and understanding. Several techniques such as DLS and zeta potential measurement, UV-vis spectroscopy, fluorescence spectroscopy, circular dichroism, FTIR, and DSC provide valuable information in the protein-nanoparticle interaction study. Besides, theoretical simulations also provide additional understanding. Despite a lot of research publications, the fundamental question remained unresolved. Can we aim for the application of functional nanoparticles in medicine? A new insight, given by us, in this article assumes a reasonable solution to this crucial question.

Application of Localized Surface Plasmon Resonance Spectroscopy to Investigate a Nano-Bio Interface

The accurate determination of events at the interface between a biological system and nanomaterials is necessary for efficacy and safety evaluation of novel nano-enabled medical products. Investigating the interaction of proteins with nanoparticles (NPs) and the formation of protein corona on nanosurfaces is particularly challenging from the methodological point of view due to the multiparametric complexity of such interactions. This study demonstrated the application of localized surface plasmon resonance (LSPR) spectroscopy as a low-cost and rapid biosensing technique that can be used in parallel with other sophisticated methods to monitor nano-bio interplay. Interaction of citrate-coated gold NPs (AuNPs) with human plasma proteins was selected as a case study to evaluate the applicability and value of scientific data acquired by LSPR as compared to fluorescence spectroscopy, which is one of the most used techniques to study NP interaction with biomolecules. LSPR results obtained for interaction of AuNPs with bovine serum albumin, glycosylated human transferrin, and non-glycosylated recombinant human transferrin correlated nicely with the adsorption constants obtained by fluorescence spectroscopy. This ability, complemented by its fast operation and reliability, makes the LSPR methodology an attractive option for the investigation of a nano-bio interface.

Exploring the Conformation and Thermal Stability of Human Serum Albumin Corona of Ferrihydrite Nanoparticles

In the last few years, a great amount of attention has been given to nanoparticles research due to their physicochemical properties that allow their use in analytical instruments or in promising imaging applications on biological systems. The use of ferrihydrite nanoparticles (Fh-NPs) in practical applications implies a particular control of their magnetic properties, stability, biocompatibility, interaction with the surface of the target, and low toxicity. In this study, the formation and organization of human serum albumin (HSA) molecules around the simple Fh-NPs and Fh-NPs doped with Co and Cu were examined by Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM) in terms of morphology and particle size. The topology of all Fh-NPs shows an organized area of HSA around each type of Fh-NP. Molecular docking studies were used in order to determine the probable location of the ferrihydrite in the HSA structure. The thermal stability of these nanohybrids was further investigated by fluorimetry, using 214-Trp residue from HSA as a spectral sensor. The denaturation temperature (T_m) was determined, and stabilization of the HSA structure in the presence of Fh-NPs was discussed. This study could be a starting point for the development of different applications targeting the structure and stability of Fh-NPs complexes with proteins.

Metal-Enhanced Fluorescence by Bifunctional Au Nanoparticles for Highly Sensitive and Simple Detection of Proteolytic Enzyme

Although fluorescence-based analytical methods have been used in intracellular analyses, their sensitivity is low for the precise analysis of intracellular proteolytic enzymes to observe cell apoptosis related to cancer and neurodegenerative diseases. In this study, a metal-enhanced-fluorescence (MEF)-based highly sensitive biosensor for the detection of proteolytic enzymes is proposed for the first time by using a bifunctional Au nanoparticle (AuNP), which is connected to the fluorophore by both single-stranded DNA (ssDNA) and a peptide. Once caspase-3, a proteolytic enzyme, cuts the peptide specifically, the fluorescence signal is drastically increased because the ssDNA maintains an optimal distance for the MEF. The proposed sensing method shows the highly sensitive detection of caspase-3 based on just a simple enzymatic cleavage reaction within 1 h, and caspase-3-related preapoptotic cell detection was successfully carried out with high sensitivity. The proposed sensing method is a rapid, simple, and one-step technique for the real-time monitoring of intracellular proteolytic enzymes and can be applied to the early diagnosis of cancer and neurodegenerative diseases.

Analyzing the adhesion mechanism of FnBPA, a surface adhesin from Staphylococcus aureus on its interaction with nanoparticle

Staphylococcus aureus expresses many Microbial Surface Recognizing Adhesive Matrix Molecules (MSCRAMM's) to recognize host extracellular matrix (ECM) molecules to initiate colonization. The MSCRAMM, fibronectin binding protein A (FnBPA), is an important adhesin for S. aureus infection. FnBPA also binds with fibrinogen (Fg) by using a unique ligand binding mechanism called dock, lock and latch. Nanoparticles, especially nanosilver particles have been widely used in a variety of biomedical applications which includes disease diagnosis and treatment, drug delivery and implanted medical device coating. In a biological system, when protein molecules encounter nanoparticle, they can be absorbed onto its surface which results in the formation of protein corona. In the present study, we have analysed the fibrinogen binding ability of rFnBPA_(189-512) in the presence of silver nanoparticles by employing techniques like gel shift assay, Western blot, size exclusion chromatography, enzyme-linked immunosorbent assay, bio-layer interferometry and circular dichroism spectroscopy. The results indicate that rFnBPA_(189-512) is unable to bind to Fg in the presence of a nanoparticle. This could be due to the inaccessibility of the Fg binding site and conformational change in rFnBPA_(189-512). With nanoparticles, rFnBPA_(189-512) undergoes significant structural changes as the β-sheet content has drastically reduced to 10% from the initial 60% at higher concentration of the nanoparticle. Pathogenic bacteria interact with its surrounding environment through their surface molecules which includes MSCRAMMs. Therefore MSCRAMMs play an important role when bacteria encounter nanoparticles. The results of the present study suggest that the orientation of the protein during the absorption on the surface of a nanoparticle as well as the concentration of the nanoparticle, will dictate the function of the absorbed protein and in this case the Fg binding property of rFnBPA_(189-512).

Interaction with zinc oxide nanoparticle kinetically traps α-synuclein fibrillation into off-pathway non-toxic intermediates

α-Synuclein is an intrinsically disordered amyloidogenic protein associated with Parkinson's disease (PD). The monomeric α-synuclein transition into amyloid fibril involves multiple steps, which are affected by several intrinsic and extrinsic factors. This increases complexities in development of targeted therapeutics against the pathological intermediate(s). Several studies have been dedicated to find an effective molecule to inhibit the detrimental amyloidogenesis. In recent years, metal oxide nanoparticle interfaces have shown direct effects on protein conformation, hence may be adopted as an alternative potential therapeutic approach against amyloidosis. In this context, our study explores the zinc oxide nanoparticle (ZnONP) with negative surface potential interface interaction with α-synuclein, and subsequent impact of the interaction on the protein fibrillation and the fibril-mediated cytotoxicity. N-terminus amphipathic "KA/TKE/QGV" repeating motifs in α-synuclein primarily interact with the ZnONP interface that enthalpically drives initial adsorption of the protein onto the interface. Whereas, subsequent bulk-protein adsorption onto the hard-corona is entropically driven, leading into flocculation of the complex. The flocs appear as amorphous mesh-like morphology in TEM micrographs, as opposed to the typical fibrils formed by the wild-type protein. Interestingly, α-synuclein in complex with ZnONP shows significantly lowered cytotoxicity against the IMR32 and THP-1 cells in-vitro, as compared to fresh α-synuclein.

Physicochemical interaction of cerium oxide nanoparticles with simulated biofluids, hemoglobin, insulin, and ds-DNA at 310.15 K

Interaction study in cerium oxide nanoparticles with biofluids and biomolecules via physicochemical, spectroscopic and in silico analytical approaches, showing conformational change.

Prediction of protein corona on nanomaterials by machine learning using novel descriptors

Effective in silico methods to predict protein corona compositions on engineered nanomaterials (ENMs) could help elucidate the biological outcomes of ENMs in biosystems without the need for conducting lengthy experiments for corona characterization. However, the physicochemical properties of ENMs, used as the descriptors in current modeling methods, are insufficient to represent the complex interactions between ENMs and proteins. Herein, we utilized the fluorescence change (FC) from fluorescamine labeling on a protein, with or without the presence of the ENM, as a novel descriptor of the ENM to build machine learning models for corona formation. FCs were significantly correlated with the abundance of the corresponding proteins in the corona on diverse classes of ENMs, including metal and metal oxides, nanocellulose, and 2D ENMs. Prediction models established by the random forest algorithm using FCs as the ENM descriptors showed better performance than the conventional descriptors, such as ENM size and surface charge, in the prediction of corona formation. Moreover, they were able to predict protein corona formation on ENMs with very heterogeneous properties. We believe this novel descriptor can improve in silico studies of corona formation, leading to a better understanding on the protein adsorption behaviors of diverse ENMs in different biological matrices. Such information is essential for gaining a comprehensive view of how ENMs interact with biological systems in ENM safety and sustainability assessments.

Applications of Nanomaterials in Leishmaniasis: A Focus on Recent Advances and Challenges

Leishmaniasis is a widely distributed protozoan vector-born disease affecting almost 350 million people. Initially, chemotherapeutic drugs were employed for leishmania treatment but they had toxic side effects. Various nanotechnology-based techniques and products have emerged as anti-leishmanial drugs, including liposomes, lipid nano-capsules, metal and metallic oxide nanoparticles, polymeric nanoparticles, nanotubes and nanovaccines, due to their unique properties, such as bioavailability, lowered toxicity, targeted drug delivery, and biodegradability. Many new studies have emerged with nanoparticles serving as promising therapeutic agent for anti-leishmanial disease treatment. Liposomal Amphotericin B (AmB) is one of the successful nano-based drugs with high efficacy and negligible toxicity. A new nanovaccine concept has been studied as a carrier for targeted delivery. This review discusses different nanotechnology-based techniques, materials, and their efficacies in leishmaniasis treatment and their futuristic improvements.

Monitoring characteristics and genotoxic effects of engineered nanoparticle-protein corona

Engineered nanoparticles (ENPs) possess different physical and chemical properties compared to their bulk counterparts. These unique properties have found application in various products in the area of therapeutics, consumer goods, environmental remediation, optical and electronic fields. This has also increased the likelihood of their release into the environment thereby affecting human health and ecosystem. ENPs, when in contact with the biological system have various physical and chemical interactions with cellular macromolecules including proteins. These interactions lead to the formation of protein corona around the ENPs. Consequently, living systems interact with the protein-coated ENP rather than with a bare ENP. This ENP-protein interaction influences uptake, accumulation, distribution and clearance and thereby affecting the cytotoxic and genotoxic responses. Although there are few studies which discussed the fate of ENPs, there is a need for extensive research in the field of ENPs, to understand the interaction of ENPs with biological systems for their safe and productive application.

Interaction of spin-labeled HPMA-based nanoparticles with human blood plasma proteins - the introduction of protein-corona-free polymer nanomedicine

In this paper, we revised the current understanding of the protein corona that is created on the surface of nanoparticles in blood plasma after an intravenous injection. We have focused on nanoparticles that have a proven therapeutic outcome. These nanoparticles are based on two types of biocompatible amphiphilic copolymers based on N-(2-hydroxypropyl)methacrylamide (HPMA): a block copolymer, poly(ε-caprolactone) (PCL)-b-poly(HPMA), and a statistical HPMA copolymer bearing cholesterol moieties, which have been tested both in vitro and in vivo. We studied the interaction of nanoparticles with blood plasma and selected blood plasma proteins by electron paramagnetic resonance (EPR), isothermal titration calorimetry, dynamic light scattering, and cryo-transmission electron microscopy. The copolymers were labeled with TEMPO radicals at the end of hydrophobic PCL or along the hydrophilic HPMA chains to monitor changes in polymer chain dynamics caused by protein adsorption. By EPR and other methods, we were able to probe specific interactions between nanoparticles and blood proteins, specifically low- and high-density lipoproteins, immunoglobulin G, human serum albumin (HSA), and human plasma. It was found that individual proteins and plasma have very low binding affinity to nanoparticles. We observed no hard corona around HPMA-based nanoparticles; with the exception of HSA the proteins showed no detectable binding to the nanoparticles. Our study confirms that a classical "hard corona-soft corona" paradigm is not valid for all types of nanoparticles and each system has a unique protein corona that is determined by the nature of the NP material.

Autonomous Synthesis of Fluorescent Silica Biodots Using Engineered Fusion Proteins

Formation of biological materials is a well-controlled process that is orchestrated by biomolecules such as proteins. Proteins can control the nucleation and mineralization of biomaterials, thereby forming the hard tissues of biological organisms, such as bones, teeth, and shells. In this study, the design and implementation of multifunctional designer proteins are demonstrated for fluorescent silica micro/nanoparticle synthesis. The R5 motif of silaffin polypeptide, which is known for its silicification capability, was fused genetically into three spectrally distinct fluorescent proteins with the intention of forming modified fluorescent proteins. The bifunctional R5 peptide domain served as a tag to provide silica synthesis at ambient conditions. Three functional fusion constructs have been prepared, including GFPmut3-R5, Venus YFP-R5, and mCherry-R5. Recombinant fluorescent proteins were purified using silica-binding peptide tag through silica gel resin. Purified proteins were tested for their binding affinity to silica using quartz crystal microbalance with dissipation monitoring to make sure they can interact strong enough with the silica surfaces. Later, engineered fluorescent proteins were used to synthesize silica nano/microparticles using silica precursor materials. Synthesized silica particles were investigated for their fluorescence properties, including time-resolved fluorescence. Additionally, elemental analysis of the particles was carried out using electron energy loss spectroscopy and energy-filtered transmission electron microscopy. Last, they were tested for their biocompatibility. In this study, we aimed to provide a biomimetic route to synthesize fluorescent silica nanoparticles. Recombinant fluorescent proteins-directed silica nanoparticles synthesis offers a one-step, reliable method to produce fluorescent particles both for biomaterial applications and other nanotechnology applications.

Modulating protein amyloid aggregation with nanomaterials

Direct exposure or intake of nanopaticles (NPs) to the human body can invoke a series of biological responses, some of which are deleterious, and as such the role of NPs in vivo requires thorough examination. Over the past decade, it has been established that biomolecules such as proteins can bind NPs to form a 'corona', where the structures and dynamics of NP-associated proteins can assign new functionality, systemic distribution and toxicity. However, the behavior and fate of NPs in biological systems are still far from being fully understood. Growing evidence has shown that some natural or artificial NPs could either up- or down-regulate protein amyloid aggregation, which is associated with neurodegenerative diseases like Alzheimer's and Parkinson's diseases, as well as metabolic diseases such as type 2 diabetes. These effects can be either indirect (e.g., through a crowding effect) or direct, depending on the NP composition, size, shape and surface chemistry. However, efforts to design anti-amyloid NPs for biomedical applications have been largely hindered by insufficient understanding of the complex processes, even though proof-of-concept experiments have been conducted. Therefore, exploring the general mechanisms of NP-meditated protein aggregation marks an emerging field in bio-nano research and a new stage of handling nanotechnology that not only aids in elucidating the origin of nanotoxicity, but also provides a foundation for engineering de novo anti-amyloid nanomedicines. In this review, we summarize research on NP-mediated protein amyloid aggregation, with the goal of contributing to sustained nanotechnology and safe nanomedicine against amyloid diseases.

Enzyme Adsorption on Nanoparticle Surface Probed by Highly Sensitive Second Harmonic Light Scattering

Recent developments in second harmonic light scattering technique and the associated theoretical models have provided a deeper insight of molecular interactions on micro- and nanoparticle surfaces. This technique is extended to probe the thermodynamics of protein adsorption on nanoparticle surface which is crucial for understanding the fate of nanoparticle-based formulations in biomedical applications. A modified Langmuir adsorption model has been applied to extract the thermodynamic parameters from the experimental data. The general applicability of the technique is established by extracting free energy change, association constant, and binding stoichiometry of adsorption of a moderate size protein, alcohol dehydrogenase, and a small size protein, insulin, on gold nanoparticles. The free energy change for the adsorption is found to be of the order of -55kJ/mol, which indicates that the interaction of proteins with the nanoparticle surface involves weak forces. On the other hand, the low value of the free energy change makes the detachment of the protein from the particle surface easier and guarantees reversibility of the binding process. In addition, one gets the binding stoichiometry of the proteins with the nanoparticle surface which opens up the possibility of controlling the payload of the protein- or peptide-based therapeutics in future biomedical applications.

In Situ Characterization of Protein Adsorption onto Nanoparticles by Fluorescence Correlation Spectroscopy

Nanotechnology holds great promise for applications in many fields including biology and medicine. Unfortunately, the processes occurring at the interface between nanomaterials and living systems are exceedingly complex and not yet well understood, which has significantly hampered the realization of many nanobiotechnology applications. Whenever nanoparticles (NPs) are incorporated by a living organism, a protein adsorption layer, also known as the "protein corona", forms on the NP surface. Accordingly, living organisms interact with protein-coated rather than bare NPs, and their biological responses depend on the nature of the protein corona. In recent years, a wide variety of biophysical techniques have been employed to elucidate mechanistic aspects of NP-protein interactions. In most studies, NPs are immersed in protein or biofluid (e.g., blood serum) solutions and then separated from the liquid for analysis. Because this approach may modify the composition and structure of the protein corona, our group has pioneered the use of fluorescence correlation spectroscopy (FCS) as an in situ technique, capable of examining NP-protein interactions while the NPs are suspended in biological fluids. FCS allows us to measure, with subnanometer precision and as a function of protein concentration, the increase in hydrodynamic radius of the NPs due to protein adsorption. This Account aims at reviewing recent progress in the exploration of NP-protein interactions by using FCS. In vitro FCS studies of the adsorption of important serum proteins onto water-solubilized luminescent NPs always showed a stepwise increase of the NP radius upon protein binding in the form of a binding isotherm, regardless of the type of NP and its specific surface functionalization. This observation indicates formation of a protein monolayer on the NP. Structure-based calculations of protein surface potentials revealed that positively charged patches on the proteins interact electrostatically with negatively charged NP surfaces, and the observed protein layer thickness always matched the known molecular dimensions of the proteins binding in certain orientations. Temperature and NP surface functionalization have also been identified as important parameters controlling protein corona formation. Notably, while the corona formed from a single type of serum protein was reversible, protein adsorption from complex biological media such as blood serum was entirely irreversible. These quantitative in vitro studies are of great relevance to the bio-nano community and especially to researchers developing engineered nanomaterials for biological and biomedical applications. Future efforts will be directed toward elucidating kinetic aspects of protein corona formation and the detailed structure of the adsorbed proteins at the molecular level. To better appreciate the biological responses triggered by NP exposure, more efforts will be devoted to the exploration of the biomolecular corona as it forms on NPs in contact with living cells, tissues, and even entire model organisms. These studies are challenging when performed in a well-controlled and quantitative fashion and rely on the availability of sophisticated analytical tools, particularly, quantitative optical imaging techniques including FCS and related fluctuation methods.

Kinetic analysis of nanoparticle-protein interactions using a plasmon waveguide resonance

A plasmon waveguide resonance (PWR) sensor is proposed for studying the interaction between gold nanoparticles and proteins. The ability of the PWR sensor to operate in both TM and TE Polarizations, i.e. its polarization diversity, facilitates the simultaneous spectroscopy of the nanoparticles surface reactions using both polarizations. The response of each polarization to streptavidin-biotin binding at the surface of gold nanoparticles is investigated in real time. Finally, using the principles of multimode spectroscopy, the nanoparticle's surface reactions are decoupled from the bulk solution refractive index variations. Schematic diagram of the NP-modified PWR sensor.

The Nature of a Hard Protein Corona Forming on Quantum Dots Exposed to Human Blood Serum

Biological responses of cells and organisms to nanoparticle exposure crucially depend on the properties of the protein adsorption layer ("protein corona") forming on nanoparticle surfaces and their characterization is a crucial step toward a deep, mechanistic understanding of their build-up. Previously, adsorption of one type of model protein on nanoparticles was systematically studied in situ by using fluorescence correlation spectroscopy. Here, the first such study of interactions is presented between water-solubilized CdSe/ZnS quantum dots (QDs) and a complex biofluid, human blood serum. Despite the large number of proteins in serum, a protein layer of well-defined (average) thickness forming on QD surfaces is observed. Both the thickness and the apparent binding affinity depend on the type of QD surface ligand. Kinetic experiments reveal that the protein corona formed from serum is irreversibly bound, whereas the one formed from human serum albumin was earlier observed to be reversible. By using sodium dodecyl sulfate-polyacrylamide gel electrophoresis and mass spectrometry, the most abundant serum proteins contributing to the formation of a hard corona on the QDs are identified.

Revealing the role of oxidation state in interaction between nitro/amino-derived particulate matter and blood proteins

Surface oxidation states of ultrafine particulate matter can influence the proinflammatory responses and reactive oxygen species levels in tissue. Surface active species of vehicle-emission soot can serve as electron transfer-mediators in mitochondrion. Revealing the role of surface oxidation state in particles-proteins interaction will promote the understanding on metabolism and toxicity. Here, the surface oxidation state was modeled by nitro/amino ligands on nanoparticles, the interaction with blood proteins were evaluated by capillary electrophoresis quantitatively. The nitro shown larger affinity than amino. On the other hand, the affinity to hemoglobin is 10(3) times larger than that to BSA. Further, molecular docking indicated the difference of binding intensity were mainly determined by hydrophobic forces and hydrogen bonds. These will deepen the quantitative understanding of protein-nanoparticles interaction from the perspective of surface chemical state.

Thermodynamic and conformational changes of protein toward interaction with nanoparticles: a spectroscopic overview

Nanoparticles (NPs) in different forms have been widely used in medicine and pharmaceutics for diagnosis and drug delivery.

Antibody tagged gold nanoparticles as scattering probes for the pico molar detection of the proteins in blood serum using nanoparticle tracking analyzer

We report a rapid one-step immunoassay to detect protein using antibody conjugated gold nanoparticles (AbGNPs) where the targeted protein concentration was determined by analyzing the gold nanoparticle aggregation caused by antibody-antigen interactions using nanoparticles tracking analysis (NTA) technique. The sandwich structure constituting the binding of the targeted human IgG to the gold nanoparticle conjugates with goat anti human monoclonal IgG (AbGNPs) was confirmed by transmission electron microscopy. The binding of human IgG (antigen, mentioned hence forth as AT) induce AbGNPs to form dimers or trimers through a typical antibody-antigen-antibody sandwich structure that can be analyzed for the sensitive determination on the basis of change in hydrodynamic diameter of AbGNPs. By this method the minimum detectable concentration of AT is found to be below 2pg/ml. We expect that a significant change in the hydrodynamic diameter of AbGNP could form the basis for the rapid one-step immunoassay development.

Artificial chaperones based on mixed shell polymeric micelles: insight into the mechanism of the interaction of the chaperone with substrate proteins using Förster resonance energy transfer

Controlled and reversible interactions between polymeric nanoparticles and proteins have gained more and more attention with the hope to address many biological issues such as prevention of protein denaturation, interference of the fibrillation of disease relative proteins, removing of toxic biomolecules as well as targeting delivery of proteins, etc. In such cases, proper analytic techniques are needed to reveal the underlying mechanism of the particle-protein interactions. In the current work, Förster Resonance Energy Transfer (FRET) was used to investigate the interaction of our tailor designed artificial chaperone based on mixed shell polymeric micelles (MSPMs) with their substrate proteins. We designed a new kind of MSPMs with fluorescent acceptors precisely placed at the desired locations as well as hydrophobic domains which can adsorb unfolded proteins with a propensity to aggregate. Interactions of such model micelles with a donor-labeled protein-FITC-lysozyme, was monitored by FRET. The fabrication strategy of MSPMs makes it possible to control the accurate location of the acceptor, which is critical to reveal some unexpected insights of the micelle-protein interactions upon heating and cooling. Preadsorption of native proteins onto the hydrophobic domains of the MSPMs is a key step to prevent thermo-denaturation by diminishing interprotein aggregations. Reversible protein adsorption during heating and releasing during cooling have been confirmed. Conclusions from the FRET effect are in line with the measurement of residual enzymatic activity.