4D-printed needle panel meters coupled with enzymatic derivatization for reading urea and glucose concentrations in biological samples

On-site analytical techniques continue being developed with advances in modern technology. To demonstrate the applicability of four-dimensional printing (4DP) technologies in the direct fabrication of stimuli-responsive analytical devices for on-site determination of urea and glucose, we used digital light processing three-dimensional printing (3DP) and 2-carboxyethyl acrylate (CEA)-incorporated photocurable resins to fabricate all-in-one needle panel meters. When adding a sample having a value of pH above the pKa of CEA (ca. 4.6-5.0) into the fabricated needle panel meter, the [H+]-responsive layer of the needle, printed using the CEA-incorporated photocurable resins, swelled as a result of electrostatic repulsion among the dissociated carboxyl groups of the copolymer, leading to [H+]-dependent bending of the needle. When coupled with a derivatization reaction (urease-mediated hydrolysis of urea to decrease [H+]; glucose oxidase-mediated oxidization of glucose to increase [H+]), the bending of the needle allowed reliable quantification of urea or glucose when referencing pre-calibrated concentration scales. After method optimization, the method's detection limits for urea and glucose were 4.9 and 7.0 μM, respectively, within a working concentration range from 0.1 to 10 mM. We verified the reliability of this analytical method by determining the concentrations of urea and glucose in samples of human urine, fetal bovine serum, and rat plasma with spike analyses and comparing the results with those obtained using commercial assay kits. Our results confirm that 4DP technologies can allow the direct fabrication of stimuli-responsive devices for quantitative chemical analysis, and that they can advance the development and applicability of 3DP-enabling analytical methods.

Metal-Oxide FET Biosensor for Point-of-Care Testing: Overview and Perspective

Metal-oxide semiconducting materials are promising for building high-performance field-effect transistor (FET) based biochemical sensors. The existence of well-established top-down scalable manufacturing processes enables the reliable production of cost-effective yet high-performance sensors, two key considerations toward the translation of such devices in real-life applications. Metal-oxide semiconductor FET biochemical sensors are especially well-suited to the development of Point-of-Care testing (PoCT) devices, as illustrated by the rapidly growing body of reports in the field. Yet, metal-oxide semiconductor FET sensors remain confined to date, mainly in academia. Toward accelerating the real-life translation of this exciting technology, we review the current literature and discuss the critical features underpinning the successful development of metal-oxide semiconductor FET-based PoCT devices that meet the stringent performance, manufacturing, and regulatory requirements of PoCT.

Design, fabrication and assembly of lab-on-a-chip and its uses

Lab-on-a-chip diagnostic devices can be used as quick tools to identify the onset of diseases at an early stage. An integrated LoC platform usually consists of a set of microfluidic elements, each of which has dedicated functions like fluid mixing, fluid manipulation, and flow control, sample preparation, detection, and a read-out that can perform the conventional laboratory procedures on a miniaturized chip. The lab-on-a-chip device can be developed on a paper or polymeric platform and is usually fabricated using pattern transfer techniques or additive and subtractive manufacturing processes. Thorough knowledge of the physics involved in microfluidic technology is essential for developing miniaturized components required for a stand-alone Point-of-Care LoC device. This chapter discusses different types of lab-on-a-chip devices, the essential principles governing the design of these systems, and different fabrication techniques. The chapter concludes with some of the prominent applications of lab-on-a-chip devices.

Instant Preparation of Ultraclean Gold Nanothorns under Ambient Conditions for SERS Kit-Enabled Mobile Diagnosis

Availability of surface-enhanced Raman scattering (SERS) substrates with good stability, high sensitivity, and a clean surface is crucial for the practical usefulness of the SERS technology in biochemical sensing, especially for point-of-care testing (POCT). Hereby, we develop a "ready-to-use" SERS kit, which requires only 20 s to fabricate ultraclean gold nanothorn (AuNT)-based SERS chips under ambient conditions with simple solution processing steps. By varying the thickness of the pre-coated platinum (Pt) nanolayer, we can control the size and number density of the grown AuNT. Taking advantage of the ultraclean surface of the instantly obtained fresh AuNT, Raman reporter molecules can also be immediately modified, by means of which specific detection of three analytes including H₂O₂, NO₂^-, and ClO^- is realized. Furthermore, we propose the concept of an SERS kit and apply it to smartphone-based Raman analysis for POCT applications. This on-site preparation method solves the long-standing challenges hindering the practical use of SERS substrates, such as complicated fabrication processes, interference of residual surfactants, poor surface stability, and easy contamination. Besides performing SERS analysis conveniently and quickly, this SERS kit-enabled POCT technology can integrate remote data terminals and medical resources, which shows great potential for environmental protection or online-healthcare systems.

Single-use thermoplastic microfluidic burst valves enabling on-chip reagent storage

A simple and reliable method for fabricating single-use normally closed burst valves in thermoplastic microfluidic devices is presented, using a process flow that is readily integrated into established workflows for the fabrication of thermoplastic microfluidics. An experimental study of valve performance reveals the relationships between valve geometry and burst pressure. The technology is demonstrated in a device employing multiple valves engineered to actuate at different inlet pressures that can be generated using integrated screw pumps. On-chip storage and reconstitution of fluorescein salt sealed within defined reagent chambers are demonstrated. By taking advantage of the low gas and water permeability of cyclic olefin copolymer, the robust burst valves allow on-chip hermetic storage of reagents, making the technology well suited for the development of integrated and disposable assays for use at the point of care.

Nucleic-acid testing, new platforms and nanotechnology for point-of-decision diagnosis of animal pathogens

Accurate disease diagnosis in animals is crucial for animal well-being but also for preventing zoonosis transmission to humans. In particular, livestock diseases may constitute severe threats to humans due to the particularly high physical contact and exposure and, also, be the cause of important economic losses, even in non-endemic countries, where they often arise in the form of rapid and devastating epidemics. Rapid diagnostic tests have been used for a long time in field situations, particularly during outbreaks. However, they mostly rely on serological approaches, which may confirm the exposure to a particular pathogen but may be inappropriate for point-of-decision (point-of-care) settings when emergency responses supported on early and accurate diagnosis are required. Moreover, they often exhibit modest sensitivity and hence significantly depend on later result confirmation in central or reference laboratories. The impressive advances observed in recent years in materials sciences and in nanotechnology, as well as in nucleic-acid synthesis and engineering, have led to an outburst of new in-the-bench and prototype tests for nucleic-acid testing towards point-of-care diagnosis of genetic and infectious diseases. Manufacturing, commercial, regulatory, and technical nature issues for field applicability more likely have hindered their wider entrance into veterinary medicine and practice than have fundamental science gaps. This chapter begins by outlining the current situation, requirements, difficulties, and perspectives of point-of-care tests for diagnosing diseases of veterinary interest. Nucleic-acid testing, particularly for the point of care, is addressed subsequently. A range of valuable signal transduction mechanisms commonly employed in proof-of-concept schemes and techniques born on the analytical chemistry laboratories are also described. As the essential core of this chapter, sections dedicated to the principles and applications of microfluidics, lab-on-a-chip, and nanotechnology for the development of point-of-care tests are presented. Microdevices already applied or under development for application in field diagnosis of animal diseases are reviewed.

Point-of-care platforms

Point-of-care applications are gaining increasing interest in clinical diagnostics and emergency applications. Biosensors are used to monitor the biomolecular interaction process between a disease biomarker and a recognition element such as a reagent. Essential are the quality and selectivity of the recognition elements and assay types used to improve sensitivity and to avoid nonspecific interactions. In addition, quality measures are influenced by the detection principle and the evaluation strategies. For these reasons, this review provides a survey and validation of recognition elements, assays, and various types of detection methods for point-of-care testing (POCT) platforms. Common applications of clinical parameters are discussed and considered. In this ever-changing field, a snapshot of current applications is needed. We provide such a snapshot by way of a table including literature citations and also discuss these applications in more detail throughout.

Miniature stick-packaging--an industrial technology for pre-storage and release of reagents in lab-on-a-chip systems

Stick-packaging of goods in tubular-shaped composite-foil pouches has become a popular technology for food and drug packaging. We miniaturized stick-packaging for use in lab-on-a-chip (LOAC) systems to pre-store and on-demand release the liquid and dry reagents in a volume range of 80-500 μl. An integrated frangible seal enables the pressure-controlled release of reagents and simplifies the layout of LOAC systems, thereby making the package a functional microfluidic release unit. The frangible seal is adjusted to defined burst pressures ranging from 20 to 140 kPa. The applied ultrasonic welding process allows the packaging of temperature sensitive reagents. Stick-packs have been successfully tested applying recovery tests (where 99% (STDV = 1%) of 250 μl pre-stored liquid is released), long-term storage tests (where there is loss of only <0.5% for simulated 2 years) and air transport simulation tests. The developed technology enables the storage of a combination of liquid and dry reagents. It is a scalable technology suitable for rapid prototyping and low-cost mass production.

Two dimensional barcode-inspired automatic analysis for arrayed microfluidic immunoassays

The usability of many high-throughput lab-on-a-chip devices in point-of-care applications is currently limited by the manual data acquisition and analysis process, which are labor intensive and time consuming. Based on our original design in the biochemical reactions, we proposed here a universal approach to perform automatic, fast, and robust analysis for high-throughput array-based microfluidic immunoassays. Inspired by two-dimensional (2D) barcodes, we incorporated asymmetric function patterns into a microfluidic array. These function patterns provide quantitative information on the characteristic dimensions of the microfluidic array, as well as mark its orientation and origin of coordinates. We used a computer program to perform automatic analysis for a high-throughput antigen/antibody interaction experiment in 10 s, which was more than 500 times faster than conventional manual processing. Our method is broadly applicable to many other microchannel-based immunoassays.

Early diagnosis of sepsis using serum biomarkers

Sepsis, an innate immunological response of systemic inflammation to infection, is a growing problem worldwide with a relatively high mortality rate. Immediate treatment is required, necessitating quick, early and accurate diagnosis. Rapid molecular-based tests have been developed to address this need, but still suffer some disadvantages. The most commonly studied biomarkers of sepsis are reviewed for their current uses and diagnostic accuracies, including C-reactive protein, procalcitonin, serum amyloid A, mannan and IFN-γ-inducible protein 10, as well as other potentially useful biomarkers. A singular ideal biomarker has not yet been identified; an alternative approach is to shift research focus to determine the diagnostic relevancy of multiple biomarkers when used in concert. Challenges facing biomarker research, including lack of methodology standardization and assays with better detection limits, are discussed. The ongoing efforts in the development of a multiplex point-of-care testing kit, enabling quick and reliable detection of serum biomarkers, may have great potential for early diagnosis of sepsis.

Biosensors and rapid diagnostic tests on the frontier between analytical and clinical chemistry for biomolecular diagnosis of dengue disease: a review

The past decades have witnessed enormous technological improvements towards the development of simple, cost-effective and accurate rapid diagnostic tests for detection and identification of infectious pathogens. Among them is dengue virus, the etiologic agent of the mosquito-borne dengue disease, one of the most important emerging infectious pathologies of nowadays. Dengue fever may cause potentially deadly hemorrhagic symptoms and is endemic in the tropical and sub-tropical world, being also a serious threat to temperate countries in the developed world. Effective diagnostics for dengue should be able to discriminate among the four antigenically related dengue serotypes and fulfill the requirements for successful decentralized (point-of-care) testing in the harsh environmental conditions found in most tropical regions. The accurate identification of circulating serotypes is crucial for the successful implementation of vector control programs based on reliable epidemiological predictions. This paper briefly summarizes the limitations of the main conventional techniques for biomolecular diagnosis of dengue disease and critically reviews some of the most relevant biosensors and rapid diagnostic tests developed, implemented and reported so far for point-of-care testing of dengue infections. The invaluable contributions of microfluidics and nanotechnology encompass the whole paper, while evaluation concerns of rapid diagnostic tests and foreseen technological improvements in this field are also overviewed for the diagnosis of dengue and other infectious and tropical diseases as well.