Selective detection of nanomolar in aqueous solution based on functionalized gold nanoparticles

Rapidly and simply detecting Cr (VI) in aqueous media via a diketopyrrolopyrrole-based chemosensor with both high selectivity and low LOD

BACKGROUND

The high toxicity of hexavalent chromium [Cr (VI)] could not only cause harmful effects on humans, including carcinogenicity, respiratory issues, genetic damage, and skin irritation, but also contaminate drinking water sources, aquatic ecosystems, and soil, impairing the reproductive capacity, growth, and survival of organisms. Due to these harmful effects, detecting toxic Cr (VI) is of great significance. However, the rapid, simple, and efficient detection at a low Cr (VI) concentration is extremely challenging, especially in an acidic condition (existing as HCrO4-) due to its low adsorption free energy.

RESULTS

A diketopyrrolopyrrole-based small molecule (DPPT-PhSMe) is designed and characterized to act as a chemosensor, which allows a high selectivity to Cr (VI) at an acidic condition with a low limit of detection to 10-8 M that is two orders of magnitude lower than the cut of limit (1 μM) recommended by World Health Organization (WHO). Mechanism study indicates that the rich sulfur atoms enhance the affinity to HCrO4-. Combining with favorable features of diketopyrrolopyrrole, DPPT-PhSMe not only allows dual-mode detection (colorimetric and spectroscopic) to Cr (VI), but also enables disposable paper-based sensor for naked-eye detection to Cr (VI) from fully aqueous media. The investigation of DPPT-PhSMe chemosensor for the quantification of Cr (VI) in real life samples demonstrates a high reliability and accuracy with an average percentage recovery of 102.1 % ± 4 (n = 3).

SIGNIFICANCE

DPPT-PhSMe represents the first diketopyrrolopyrrole-derived chemosensor for efficient detection to toxic Cr (VI), not only providing a targeted solution to the bottleneck of Cr (VI) detection in acidic conditions (existing as HCrO4-) caused by its low adsorption free energy, but also opening a new scenario for simple, selective, and efficient Cr (VI) detection with conjugated dye molecules.

Highly selective and sensitive tool for the detection of Hg(II) using 3-(Trimethoxysilyl) propyl methacrylate functionalized Ag-Ce nanocomposite from real water sample

Mercury and its derivates cause distinct toxicity and it is detrimental to the ecosystem where the excessive concentration contributes towards the environmental pollutants. The current study reported a colorimetric method for the detection of Hg(II) ion with high specificity and selectivity using Ag-Ce nanocomposite (NC) functionalized by 3-(Trimethoxysilyl) propyl methacrylate. The synthesized Ag-Ce NC was characterized by using double beam UV-visible spectrophotometer, zeta sizer, EDS, TEM, FT-IR, XRD and particle size analyzer. The synthesized particle possessed an average particle size of 27 ± 1 nm and zeta potential of -39.32 ± 3 mV. The brownish yellow colored Ag-Ce NC changed to colorless in presence of Hg(II) where the colorimetric detection was extremely specific and superior towards Hg(II) ion on comparing the tests with other metal ions. An excellent linear correlation was observed between absorbance (395 nm) and Hg(II) concentrations (1 nM-10 μM) (R² = 0.988) with LOD of 0.03 nM. A cotton swab based probe was prepared for selective, elegant and low cost colorimetric method to detect Hg(II). The parametric study was performed for optimizing the suitable condition. The colorimetric probe developed by this study for Hg(II) detection using Ag-Ce NC shows excellent practical applicability.

A novel colorimetric probe with positive correlation between toxicity and the reaction for the assessment of chromium ions

Different valence states of chromium ions possess huge differences in toxicity. Hence, it is an innovative idea to design a reasonable probe to detect Cr according to the toxicity characteristics of different valence states. We report a novel, rapid, simple and accurate probe for the detection of Cr³⁺ and Cr⁶⁺ ions. As a probe, gold nanoparticles (Au NPs) are successfully modified using tartaric acid (TA) and 2-[4-(2-hydroxyethyl)-1-piperazinyl] ethanesulfonic acid (HEPES) via a two-step modification; the probe shows an increase in the sensitivity towards Cr⁶⁺ and decreases towards Cr³⁺, which is consistent with their toxicity characteristics, benefiting the assessment of total Cr toxicity. The proposed probe achieves considerable two-channel (ultraviolet absorption spectrum and naked eye vision) detection of Cr³⁺ and Cr⁶⁺ providing wide linearity regions and low detection limits. Meanwhile, the results of the interference experiments and analysis of the real samples showed high selectivity and accuracy of the proposed method. With popularization, this method possesses great potential in environmental monitoring and control.

Two Novel BODIPY-Functional Magnetite Fluorescent Nano-Sensors for Detecting of Cr(VI) Ions in Aqueous Solutions

In this study, we developed two different very sensitive magnetite fluorescent Fe₃O₄@SiO₂-TPED-BODIPY and Fe₃O₄@SiO₂-TMPTA-BODIPY nano-sensors for the selective detection of Cr(VI) ions. The Cr(VI) metal ions sensing is based on the fluorescent quenching of BODIPY functionalized with Fe₃O₄@SiO₂-TPED and Fe₃O₄@SiO₂-TMPTA nanoparticles in the ethanol-water environment. Characterization of the newly synthesized fluorescent BODIPY compound was performed on a ¹H and ¹³C-NMR spectrometer. The morphology, chemical and physical properties of the sensing nano-sensors were studied by transmission thermogravimetric analysis (TGA), X-ray diffraction (XRD), energy dispersive X-ray (EDX), scanning electron microscopy (SEM), FT-IR spectroscopy, and transmission electron microscopy (TEM). UV-visible and fluorescent spectroscopy were used to characterize BODIPY functionalized magnetite fluorescent nano-sensors. Characterization measurements revealed that the mean particle diameter of magnetite fluorescent Fe₃O₄@SiO₂-TPED-BODIPY and Fe₃O₄@SiO₂-TMPTA-BODIPY nano-sensors was 18.5 and 19 nm, respectively. The magnetite fluorescent Fe₃O₄@SiO₂-TPED-BODIPY and Fe₃O₄@SiO₂-TMPTA-BODIPY nano-sensors (0.1 gL^-1 in EtOH/H₂O, v/v (3/7)) showed fluorescence quenching responses towards Cr(VI) ions in the medium at pH:1. The fluorescence quenches of the magnetite fluorescent Fe₃O₄@SiO₂-TPED-BODIPY and Fe₃O₄@SiO₂-TMPTA-BODIPY nano-sensors by Cr(VI) were completed in first 5 and 3 min. Respectively. These features provide potential uses of BODIPY functionalized magnetite fluorescent nano-sensors (Fe₃O₄@SiO₂-TPED-BODIPY and Fe₃O₄@SiO₂-TMPTA-BODIPY) as a new class of non-toxic sensors for environmental applications. Graphical Abstract.

Colorimetric speciation analysis of chromium using 2-thiobarbituric acid capped silver nanoparticles

In the present work, 2-thiobarbituric acid (TBA)-capped silver nanoparticles (AgNPs) have been introduced as a novel nanoprobe in the construction of a sensitive and selective colorimetric sensor for Cr(iii) and Cr(vi) ions. Cr(iii) can be linked to TBA on the AgNP surface via -N or -OH groups and form a bridge between two or more AgNPs causing their aggregation. This phenomenon leads to a dramatic color change in TBA-AgNPs from yellow to pinkish red. UV-Vis spectrophotometry, FT-IR and transmission electron microscopy (TEM) were utilized for quantitative analyses, characterization of modified AgNPs and determination of the interaction mechanism of TBA-AgNPs - Cr(iii). The color change depended on the concentration of Cr(iii) and the ratio of UV-Vis absorption intensity at 520 nm to that at 418 nm (A520/A418) was linearly proportional to the concentration of Cr(iii) from 0.012 to 3.25 mg L-1 (LOD = 8.4 µg L-1). To eliminate or reduce the interference of other cations in Cr(iii) determination, EDTA was used as a masking agent at pH 6.5. Moreover, the developed method was used for the determination of Cr(vi) in the presence of ascorbic acid (AA) (as a reducing agent) in the concentration range of 0.20 to 1.40 mg L-1. The proposed probe was successfully applied for the determination of Cr(iii) and Cr(vi) in cement factory wastewater.

Hydrolytically Stable Luminescent Cationic Metal Organic Framework for Highly Sensitive and Selective Sensing of Chromate Anions in Natural Water Systems

Effective detection of chromate anions in aqueous solution is highly desirable because of their high solubility, environmental mobility, carcinogenicity, and bioaccumulation effect. A new strategy for precise detection of chromate anions in the presence of a large excess of other anions, such as Cl^-, NO₃^-, and HCO₃^-, in drinking water and natural water systems remains a challenge. Herein, a hydrolytically stable cationic luminescent europium(III)-based metal organic framework (MOF), 1, was successfully synthesized and investigated as a luminescent sensor that exhibits instant and selective luminescence quenching properties toward chromate ions in aqueous solutions. Moreover, 1 can be introduced into high-ionic-strength water system (e.g., seawater) for chromate detection as a consequence of the excellent sensing selectivity. The real environmental application of 1 as a chromate probe is studied in deionized water, lake water, and seawater. The detection limits in these aqueous media are calculated to be 0.56, 2.88, and 1.75 ppb, respectively. All of these values are far below the maximum contamination standard of Cr(VI) in drinking water of 100 ppb, defined by the U.S. Environmental Protection Agency. This excellent chromate sensing capability originates from the fast enrichment of chromate ions in solids of 1 from solutions, followed by efficient energy transfer from the MOF skeleton to the chromate anion, as demonstrated by solution absorption spectroscopy, X-ray diffraction, and chromate uptake kinetics and isotherm investigations. To the best of our knowledge, 1 possesses the lowest chromate detection limit among all reported MOFs up to date and is the only MOF material reported for chromate sensing application under environmentally relevant conditions with high ionic strengths.

Morphological and transcriptional responses of Lycopersicon esculentum to hexavalent chromium in agricultural soil

The carcinogenic, teratogenic, and mutagenic effects of hexavalent chromium (Cr[VI]) on living organisms through the food chain raise the immediate need to assess the potential toxicological impacts of Cr(VI) on human health. Therefore, the concentration-dependent responses of 12 Cr(VI)-responsive genes selected from a high-throughput Lycopersicon esculentum complementary DNA microarray were examined at different Cr concentrations. The results indicated that most of the genes were differentially expressed from 0.1 mg Cr/kg soil, whereas the lowest-observable-adverse-effect concentrations of Cr(VI) were 1.6 mg Cr/kg soil, 6.4 mg Cr/kg soil, 3.2 mg Cr/kg soil, and 0.4 mg Cr/kg soil for seed germination, root elongation, root biomass, and root morphology, respectively, implying that the transcriptional method was more sensitive than the traditional method in detecting Cr(VI) toxicity. Dose-dependent responses were observed for the relative expression of expansin (p = 0.778), probable chalcone-flavonone isomerase 3 (p = -0.496), and 12S seed storage protein CRD (p = -0.614); therefore, the authors propose the 3 genes as putative biomarkers in Cr(VI)-contaminated soil. Environ Toxicol Chem 2016;35:1751-1758. © 2015 SETAC.

Synthesis and characterization of novel sulfanilic acid–polyvinyl chloride–polysulfone blend membranes for metal ion rejection

A novel facile method is developed for the modification of polyvinyl chloride and blend membranes are fabricated for heavy metal removal. This method is straightforward, has a high efficiency and is done at low pressure.

Selective colorimetric detection of Cr(iii) and Cr(vi) using gallic acid capped gold nanoparticles

A colorimetric assay is proposed for the selective detection of Cr(iii) and Cr(vi) via the aggregation-induced color change of gallic acid capped gold nanoparticles (GA-AuNPs). The AuNPs are characterized using UV-vis spectroscopy, transmission electron microscopy (TEM), dynamic light scattering (DLS) and Fourier-transform infrared spectrometry (FT-IR). To detect Cr(iii) and Cr(vi) coexisting in a sample, citrate and thiosulfate were applied to mask Cr(vi) for the detection of Cr(iii), and ethylenediaminetetraacetic acid disodium salt (EDTA) was applied to mask Cr(iii) for the detection of Cr(vi). At optimized experimental conditions, the selectivity of these AuNPs-based detection systems is excellent for Cr(iii) and/or Cr(vi) compared with other types of metal ions. The limit of detections (LODs) of a mixture of Cr(iii) and Cr(vi), Cr(iii) and Cr(vi) by eye vision are 1.5, 1.5 and 2 μM, respectively, and those by UV-vis spectroscopy are 0.05, 0.1 and 0.1 μM, respectively. The minimum detectable concentrations for Cr(iii) or Cr(vi) are all below the guideline value set by the US Environmental Protection Agency (EPA). The applicability of the AuNPs-based colorimetric sensor is also validated by the detection of Cr(iii) and Cr(vi) in electroplating wastewater and real water samples with high recoveries.

Preparation and Characterization of Chitosan Thin Films on Mixed-Matrix Membranes for Complete Removal of Chromium

Herein we present a new approach for the complete removal of Cr(VI) species, through reduction of Cr(VI) to Cr(III), followed by adsorption of Cr(III). Reduction of chromium from water is an important challenge, as Cr(IV) is one of the most toxic substances emitted from industrial processes. Chitosan (CS) thin films were developed on plain polysulfone (PSf) and PSf/TiO2 membrane substrates by a temperature-induced technique using polyvinyl alcohol as a binder. Structure property elucidation was carried out by X-ray diffraction, microscopy, spectroscopy, contact angle measurement, and water uptake studies. The increase in hydrophilicity followed the order: PSf < PSf/TiO2 < PSf/TiO2/CS membranes. Use of this thin-film composite membrane for chromium removal was investigated with regards to the effects of light and pH. The observations reveal 100 % reduction of Cr(VI) to Cr(III) through electrons and protons donated from OH and NH2 groups of the CS layer; the reduced Cr(III) species are adsorbed onto the CS layer via complexation to give chromium-free water.

A colorimetric probe based on desensitized ionene-stabilized gold nanoparticles for single-step test for sulfate ions

Desensitized ionene-stabilized gold nanoparticles have been prepared and applied as a colorimetric probe for the single-step test for sulfate ions at the relatively high concentration level. The approach is based on aggregation of the nanoparticles leading to the change in absorption spectra and color of the solution. These nanoparticles are characterized by the decreased sensitivity due to both electrostatic and steric stabilization, which allows for simple, and rapid direct single-step determination of sulfate at the relatively high concentration level in real water samples without sample pretreatment or dilution. Influence of different factors (the time of interaction, pH, the concentrations of sulfate ions and the nanoparticles) on the aggregation and analytical performance of the procedure was investigated. The method allows for the determination of sulfate ions in the mass range of 0.2-0.4 mg with RSD of 5% from the sample volume of less than 2 mL. It has a sharp dependence of the colorimetric response on the concentration of sulfate, which makes it prospective for indicating deviations of the sulfate concentration regarding some declared value chosen within the above range. The time of the analysis is 2 min. The method was applied to the analysis of mineral water samples.

Detection of the nanomolar level of total Cr[(iii) and (vi)] by functionalized gold nanoparticles and a smartphone with the assistance of theoretical calculation models

We report a method for rapid, effective detection of both Cr(iii) and Cr(vi) (in the form of Cr(3+) and Cr2O7(2-), the main species of chromium in the natural environment) by making use of meso-2,3-dimercaptosuccinic acid (DMSA)-functionalized gold nanoparticles (Au NPs). The limit of detection (LOD) is 10 nM with the naked eye and the assay can be applied in detecting chromium in polluted soil from Yun-Nan Province in Southwest China. We use density functional theory to calculate the change of the Gibbs free energy (ΔG) of the interactions between the DMSA-Au NP system and various metal ions, which shows that DMSA-Au NPs have high specificity for both Cr(3+) and Cr2O7(2-).

Etching-based transformation of dumbbell-shaped gold nanorods facilitated by hexavalent chromium and their possible application as a plasmonic sensor

Investigation of the transformation of morphology, optical properties, and zeta potential of dumbbell-shaped gold nanorods upon Cr(vi) interaction was performed.

Fluorescent, MRI, and colorimetric chemical sensors for the first-row d-block metal ions

Transition metals (d-blocks) are recognized as playing critical roles in biology, and they most often act as cofactors in diverse enzymes; however, improper regulation of transition metal stores is also connected to serious disorders. Therefore, the monitoring and imaging of transition metals are significant for biological research as well as clinical diagnosis. In this article, efforts have been made to review the chemical sensors that have been developed for the detection of the first-row d-block metals (except Cu and Zn): Cr, Mn, Fe, Co, and Ni. We focus on the development of fluorescent sensors (fall into three classes: "turn-off", "turn-on", and ratiometric), colorimetric sensors, and responsive MRI contrast agents for these transition metals (242 references). Future work will be likely to fill in the blanks: (1) sensors for Sc, Ti, and V; (2) MRI sensors for Cr, Mn, Co, Ni; (3) ratiometric fluorescent sensors for Cr(6+), Mn(2+), and Ni(2+), explore new ways of sensing Fe(3+) or Cr(3+) without the proton interference, as well as extend applications of MRI sensors to living systems.

Optical reading of contaminants in aqueous media based on gold nanoparticles

With increasing trends of global population growth, urbanization, pollution over-exploitation, and climate change, the safe water supply has become a global issue and is threatening our society in terms of sustainable development. Therefore, there is a growing need for a water-monitoring platform with the capability of rapidness, specificity, low-cost, and robustness. This review summarizes the recent developments in the design and application of gold nanoparticles (AuNPs) based optical assays to detect contaminants in aqueous media with a high performance. First, a brief discussion on the correlation between the optical reading strategy and the optical properties of AuNPs is presented. Then, we summarize the principle behind AuNP-based optical assays to detect different contaminants, such as toxic metal ion, anion, and pesticides, according to different optical reading strategies: colorimetry, scattering, and fluorescence. Finally, the comparison of these assays and the outlook of AuNP-based optical detection are discussed.

A functional graphene oxide-ionic liquid composites-gold nanoparticle sensing platform for ultrasensitive electrochemical detection of Hg2+

A simple and sensitive electrochemical assay strategy of stripping voltammetry for mercury ions (Hg(2+)) detection is described based on the synergistic effect between ionic liquid functionalized graphene oxide (GO-IL) and gold nanoparticles (AuNPs). The AuNPs-GO-IL modified onto glassy carbon electrode (GCE) resulted in highly enhanced electron conductive nanostructured membrane and large electroactive surface area, which was excellently examined by scanning electron microscopy and cyclic voltammetry. After accumulating Hg(2+), anodic stripping voltammetry (ASV) was performed, and differential pulse voltammetry (DPV) was employed for signal recording of Hg(2+). Several main experimental parameters were optimized, i.e., deposition potential and time of AuNPs were -0.2 V and 180 s, respectively, and accumulation potential and time of Hg(2+) were -0.3 V and 660 s, respectively. Under the optimal conditions, this AuNPs-GO-IL-GCE sensor attained a good linearity in a wide range of 0.1-100 nM (R = 0.9808) between the concentration of the Hg(2+) standard and peak current. The limit of detection was estimated to be 0.03 nM at a signal-to-noise ratio of 3σ. A variety of common coexistent ions in water samples were investigated, showing no obvious interferences on the Hg(2+) detection. The practical application of the proposed sensor has been carried out and demonstrated as feasible for determination of trace levels of Hg(2+) in drinking and environmental water samples.

Label-free gold nanoparticles for the determination of neomycin

A new spectrophotometric method for the determination of neomycin has been developed. The method is based on aggregation of label-free gold nanoparticles leading to change in absorption spectra and color of the solution. Influence of different factors (the concentration of ethylenediaminetetraacetate (EDTA), pH, the concentrations of neomycin and the nanoparticles) on the aggregation and analytical performance of the method was investigated. EDTA plays an important role not only as a masking agent to eliminate interferences of metal cations but strongly affects the sensitivity of the nanoparticles relative to neomycin. The method allows to determine neomycin with detection limit of 28ngmL(-1). It was applied to analysis of eye- and ear-drops. The sample pretreatment is simply done by diluting the formulation with water.

Plasmonic-coupling-based sensing by the assembly and disassembly of dipycolylamine-tagged gold nanoparticles induced by complexing with cations and anions

A surface-plasmon-coupling-mediated sensor system is developed based on Au nanoparticles tagged with a coordinative dipycolylamine and lipoyl-anchored naphthalimide derivative (AuNP@DPA). The AuNPs with tailored ligands exhibit distinct sensing activity via sequential assembly into nanoparticle aggregates induced by metal ion complexing, and disassembly in the presence of pyrophosphate (PPi) anions, which is accompanied by a swift, reversible color change due to a surface plasmon resonance coupling effect. It is found that divalent metal ions are more effective than mono- or tri-valent ions in the aggregate formation process, Mn(2+)-induced aggregates are more sensitive to the capture of PPi anions than other AuNP aggregates, and the disassembly upon anion complexation exhibits a highly selective response. The AuNP@DPA-based molecular recognition system also demonstrates a viable performance for the detection of total selective metal ions present in different types of water analytes.