Electrochemical sensor for the analysis of 5-hydroxymethylcytosine in the presence of cytosine using pencil graphite electrode

In recent years, important efforts have been made to elucidate the mechanisms of epigenetic regulation, and one of the most studied epigenetic modifications was DNA methylation/demethylation. In this study, the voltammetric behaviour of 5-hydroxymethylcytosine was studied in the pH range of 2.00 - 11.00 using pencil graphite electrodes by differential pulse and square wave voltammetry. The effect of buffer solutions, scan rate, square wave voltammetry parameters, and stripping conditions on the voltammetric responses of 5-hydroxymethylcytosine were performed. The electrochemical oxidation process of 5-hydroxymethylcytosine on the pencil graphite electrode was realized under adsorption control. In human urine, by square wave stripping voltammetry, 5-hydroxymethylcytosine was quantified in a concentration range of 1.00 × 10-5 M-2.00 × 10-4 M. The proposed method was tested in the presence of cytosine in human urine. The recovery value of 5-hydroxymethylcytosine was found to be 99.57 %.

An electrochemical biosensor for detecting DNA methylation based on AuNPs/rGO/g-C3N4 nanocomposite

DNA methylation as a ubiquitously regulation is closely associated with cell proliferation and differentiation. Growing data shows that aberrant methylation contributes to disease incidence, especially in tumorigenesis. The approach for identifying DNA methylation usually depends on treatment of sodium bisulfite, which is time-consuming and conversion-insufficient. Here, with a special biosensor, we establish an alternative approach for detecting DNA methylation. The biosensor is consisted of two parts, which are gold electrode and nanocomposite (AuNPs/rGO/g-C₃N₄). Nanocomposite was fabricated by three components, which are gold nanoparticles (AuNPs), reduced graphene oxide (rGO) and graphite carbon nitride (g-C₃N₄). For methylated DNA detection, the target DNA was captured by probe DNA immobilized on the gold electrode surface through thiolating process and subjected to hybrid with anti-methylated cytosine conjugated to nanocomposite. When the methylated cytosines in target DNA were recognized by anti-methylated cytosine, a change of electrochemical signals will be observed. With different size of target DNAs, the concentration and methylation level were tested. It is shown that in short size methylated DNA fragment, the linear range and LOD of concentration is 10^-7M-10^-15M and 0.74 fM respectively; in longer size methylated DNA, the linear range of methylation proportion and LOD of copy number is 3%-84% and 10³ respectively. Also, this approach has a high sensitivity and specificity as well as anti-disturbing ability.

Simultaneous voltammetric determination of 7-methyl-guanine and 5-methyl-cytosine using a cathodically pre-treated boron-doped diamond electrode

Given the importance of identifying the presence of biomarkers of human diseases in DNA samples, the main objective of this work was to investigate, for the first time, the electro-catalytic oxidation of 7-methyl-guanine (7-mGua) and 5-methyl-cytosine (5-mCyt) on a boron doped diamond electrode pre-treated cathodically (red-BDDE), using differential pulse voltammetry (DPV) and cyclic voltammetry (CV). The anodic peak potentials of 7-mGua and 5-mCyt by DPV were at E = 1.04 V and E = 1.37 V at pH = 4.5, indicating excellent peak separation of approximately 330 mV between species. Using DPV, experimental conditions such as supporting electrolyte, pH and influence of interferents were also investigated to develop a sensitive and selective method for individual and simultaneous quantification of these biomarkers. The analytical curves for the simultaneous quantification of 7-mGua and 5-mCyt in the acid medium (pH = 4.5) were: concentration range of 0.50-5.00 μmol L^-1 (r = 0.999), detection limit of 0.27 μmol L^-1 for 7-mGua; from 3.00 to 25.00 μmol L^-1 (r = 0.998), with a detection limit of 1.69 μmol L^-1 for 5-mCyt. A new DP voltammetric method for the simultaneous detection and quantification of biomarkers 7-mGua and 5-mCyt using a red-BDDE is proposed.

Advances in measuring DNA methylation

DNA methylation is one of the most important components of epigenetics, which plays essential roles in maintaining genome stability and regulating gene expression. In recent years, DNA methylation measuring methods have been continuously optimized. Combined with next generation sequencing technologies, these approaches have enabled the detection of genome-wide cytosine methylation at single-base resolution. In this paper, we review the development of 5-methylcytosine and its oxidized derivatives measuring methods, and recent advancement of single-cell epigenome sequencing technologies, offering more referable information for the selection and optimization of DNA methylation sequencing technologies and related research.

Current Advances in DNA Methylation Analysis Methods

DNA methylation is one of the epigenetic changes, which plays a major role in regulating gene expression and, thus, many biological processes and diseases. There are several methods for determining the methylation of DNA samples. However, selecting the most appropriate method for answering biological questions appears to be a challenging task. The primary methods in DNA methylation focused on identifying the state of methylation of the examined genes and determining the total amount of 5-methyl cytosine. The study of DNA methylation at a large scale of genomic levels became possible following the use of microarray hybridization technology. The new generation of sequencing platforms now allows the preparation of genomic maps of DNA methylation at the single-open level. This review includes the majority of methods available to date, introducing the most widely used methods, the bisulfite treatment, biological identification, and chemical cutting along with their advantages and disadvantages. The techniques are then scrutinized according to their robustness, high throughput capabilities, and cost.

Signal-on electrochemical detection of DNA methylation based on the target-induced conformational change of a DNA probe and exonuclease III-assisted target recycling

A promising electrochemical system was explored for DNA methylation detection according to the construction of a signal-on biosensor. Based on the ingenious design of probe DNA and auxiliary DNA, methylated target DNA triggered the exonuclease III (Exo III) digestion of auxiliary DNA from 3'-terminus, resulting in the conformational change of probe DNA with an electroactive methylene blue (MB) tag at 5'-terminus. Consequently, the MB tag in the probe DNA was close to the electrode surface for electron transfer, generating an increased current signal. Because of the target recycling of methylated DNA, significant signal amplification was obtained. Moreover, bisulfite conversion conferred an efficient approach for the universal analysis of any CpG sites without the restriction of specific DNA sequence. As a result, the target DNA with different methylation statuses were clearly recognized, and the fully methylated DNA was quantified in a wide range from 10 fM to 100 pM, with a detection limit of 4 fM. The present work realized the assay of methylated target DNA in serum samples with satisfactory results, illustrating the application performance of the system in complex sample matrix.

Dual-Signal Readout of DNA Methylation Status Based on the Assembly of a Supersandwich Electrochemical Biosensor without Enzymatic Reaction

A highly sensitive and selective biosensing system was designed to analyze DNA methylation using a dual-signal readout technique in combination with the signal amplification of supersandwich DNA structure. Through the ingenious design of target-triggered cascade of hybridization chain reaction, one target DNA could initiate the formation of supersandwich structure with multiple signal probes. As a result, one-to-multiple amplification effect was achieved, which conferred high sensitivity to target molecular recognition. Based on probe 1 labeled with ferrocene and probe 2 modified with methylene blue, the target DNA was clearly recognized by two electrochemical signals at independent potentials, which was helpful for the acquisition of more accurate detection results. Taking advantage of bisulfite conversion, the methylation status of cytosine (C) was changed to nucleic acid sequence status, which facilitated the hybridization-based detection without enzymatic reaction. Consequently, the methylated DNA was detected at the femtomolar level with satisfactory analytical parameters. The proposed system was effectively used to assess methylated DNA in human blood serum samples, illuminating the possibility of the sensing platform for applications in disease diagnosis and biochemistry research.

DNA methylation detection: recent developments in bisulfite free electrochemical and optical approaches

DNA methylation is one of the significant epigenetic modifications involved in mammalian development as well as in the initiation and progression of various diseases like cancer. Over the past few decades, an enormous amount of research has been carried out for the quantification of DNA methylation in the mammalian genome. Earlier, most of these methodologies used bisulfite treatment. However, the low conversion, false reading, longer assay time and complex chemical reaction are the common limitations of this method that hinder their application in routine clinical screening. Thus, as an alternative to bisulfite conversion-based DNA methylation detection, numerous bisulfite-free methods have been proposed. In this regard, electrochemical biosensors have gained much attention in recent years for being highly sensitive yet cost-effective, portable, and simple to operate. On the other hand, biosensors with optical readouts enable direct real time detection of biological molecules and are easily adaptable to multiplexing. Incorporation of electrochemical and optical readouts into bisulfite free DNA methylation analysis is paving the way for the translation of this important biomarker into standard patient care. In this review, we provide a critical overview of recent advances in the development of electrochemical and optical readout based bisulfite free DNA methylation assays.

Electrochemical biosensing strategies for DNA methylation analysis

DNA methylation is one of the key epigenetic modifications of DNA that results from the enzymatic addition of a methyl group at the fifth carbon of the cytosine base. It plays a crucial role in cellular development, genomic stability and gene expression. Aberrant DNA methylation is responsible for the pathogenesis of many diseases including cancers. Over the past several decades, many methodologies have been developed to detect DNA methylation. These methodologies range from classical molecular biology and optical approaches, such as bisulfite sequencing, microarrays, quantitative real-time PCR, colorimetry, Raman spectroscopy to the more recent electrochemical approaches. Among these, electrochemical approaches offer sensitive, simple, specific, rapid, and cost-effective analysis of DNA methylation. Additionally, electrochemical methods are highly amenable to miniaturization and possess the potential to be multiplexed. In recent years, several reviews have provided information on the detection strategies of DNA methylation. However, to date, there is no comprehensive evaluation of electrochemical DNA methylation detection strategies. Herein, we address the recent developments of electrochemical DNA methylation detection approaches. Furthermore, we highlight the major technical and biological challenges involved in these strategies and provide suggestions for the future direction of this important field.

Global DNA Methylation Detection System Using MBD-Fused Luciferase Based on Bioluminescence Resonance Energy Transfer Assay

DNA methylation plays an important role in the regulation of gene expression. In normal cells, transposable elements that constitute approximately 45% of the human genome are highly methylated to silence their expression. In cancer cells, transposable elements are hypomethylated; therefore, global DNA methylation level is considered as a biomarker for cancer diagnostics. In this study, a homogeneous assay for measuring global DNA methylation level based on bioluminescence resonance energy transfer (BRET) was developed using methyl-CpG binding domain (MBD)-fused luciferase. In this assay, the MBD-luciferase recognizes methylated CpG, thus, BRET between the luciferase and fluorescent DNA intercalating dye is detected. We demonstrated that the BRET signal depended on the DNA methylation level of the target DNA. Moreover, the BRET signal was correlated with the LINE1 DNA methylation level on human genomic DNA, as determined by the bisulfite method. These results indicate that the global DNA methylation level of human genomic DNA could be detected simply by measuring the BRET signal.

Electrochemical assay for the signal-on detection of human DNA methyltransferase activity

Strategies to detect human DNA methyltransferases are needed, given that aberrant methylation by these enzymes is associated with cancer initiation and progression. Here we describe a nonradioactive, antibody-free, electrochemical assay in which methyltransferase activity on DNA-modified electrodes confers protection from restriction for signal-on detection. We implement this assay with a multiplexed chip platform and show robust detection of both bacterial (SssI) and human (Dnmt1) methyltransferase activity. Essential to work with human methyltransferases, our unique assay design allows activity measurements on both unmethylated and hemimethylated DNA substrates. We validate this assay by comparison with a conventional radioactive method. The advantages of electrochemistry over radioactivity and fluorescence make this assay an accessible and promising new approach for the sensitive, label-free detection of human methyltransferase activity.

Simultaneous profiling of multiple gene-methylation loci by electrochemical methylation-specific ligase detection reaction

A novel method of electrochemical methylation-specific ligation detection reaction is first presented for simultaneous evaluation of multiple gene-methylation loci in a single-tube experiment without PCR amplification or restriction enzyme reaction.

Evaluating the global CpG methylation status of native DNA utilizing a bipartite split-luciferase sensor

Epigenetic modifications play an essential role in the regulation of gene expression and ultimately cell fate. Methylation of cytosine at CpG dinucleotides (mCpG) is an important epigenetic mark that has been correlated with cancer when present at promoter sites of tumor suppressor genes. To develop a rapid methodology for the direct assessment of global levels of DNA methylation, we first interrogated the methyl-CpG binding domains (MBDs), the Kaiso family of Cys(2)-His(2) zinc fingers, and an SET- and RING-associated domain using a split-luciferase reassembly methodology. We identified MBD1 as the most selective domain for the discrimination between mCpG and CpG sites with over 90-fold selectivity. Utilizing a bipartite strategy, we constructed a purely methylation-dependent bipartite sensor for the direct detection of global levels of DNA methylation by attaching MBD1 domains to each of the split-luciferase halves. This new sensor was validated for the direct determination of genomic DNA methylation levels in in vitro studies without any intervening chemical or enzymatic processing of DNA. Finally, we demonstrated that this bipartite sensor can be utilized for monitoring dose-dependent changes in global levels of methylation in DNA from HeLa cells challenged with 5-aza-2'-deoxycytidine, a DNA methyltransferase inhibitor.