Preparation and Investigation of Temperature-Responsive SiO2-PSBMA Janus Nanosheet with Salt-Tolerant Properties for Enhanced Recovery of Heavy Oil

Enhancing heavy oil recovery is crucial to ensuring stable crude oil production. The development of stimulus-responsive Janus Pickering emulsifiers tailored for a reservoir environment has garnered significant attention in the field of reservoir production, emerging as a promising alternative to traditional surfactants. In this study, silica-based Janus nanosheets with temperature-responsive properties (OH-SiO2-PSBMA JNs) are synthesized using sol-gel process and atom transfer radical polymerization (ATRP) method. Experimental observations reveal that OH-SiO2-PSBMA JNs (0.1 wt %) can effectively reduce the interfacial tension (IFT) between heavy oil and water to 23.24 mN/m. Additionally, these nanosheets exhibited excellent emulsifying ability, forming stable emulsions with an average particle size of only 35 μm at a mass fraction of 1 wt % and demonstrating good salt tolerance (Salinity value: 1.51 × 104 mg/L). Furthermore, OH-SiO2-PSBMA JNs exhibited a temperature response that is well-suited for the reservoir environment, effectively stabilizing heavy oil emulsion at a high temperature (65 °C) and facilitating oil-water separation at a lower temperature (25 °C). These excellent properties of nanosheets contributed to obtaining an additional 13.2% recovery rate at low concentration (0.03 wt %). These results indicated that OH-SiO2-PSBMA JNs had the potential for enhanced oil recovery (EOR) application.

Interfacial Activity of Janus Particle: Unity of Molecular Surfactant and Homogeneous Particle

Janus particles with different compositions and properties segmented to different regions on the surface of one objector provide more opportunities for interfacial engineering. As a novel interfacial active material, Janus particles integrate the amphiphilic properties of molecular surfactants and the Pickering effect of homogeneous particles. In this research, the outstanding properties of Janus particles on various interfaces are examined from both theoretical and practical perspectives, and the advantages of Janus particles over molecular surfactants and homogeneous particle surfactants are analyzed. We believe that Janus particles are ideal tools for interface regulation and functionalization in the future.

Facile Fabrication of Monodisperse Micron-Sized Dual Janus Silica Particles with Asymmetric Morphology and Chemical Environment

Janus particles are a kind of materials with asymmetric morphology or surface chemical environment. But so far, the preparation of particles with dual asymmetry is still a challenging problem. Hence the cation surfactant hexadecyl trimethyl ammonium bromide and co-surfactant octadecylamine are applied to improve the Pickering emulsion stability, and the micron-sized silica particles are arranged in a single layer at the toluene-water interface through electrostatic interaction. Furthermore, organosilane reagents are added in the preparation process, resulting in the construction of asymmetric hydrophilic or hydrophobic mesoporous precisely onto the micron-sized silica particles surface. The cation surfactant-assisted Pickering emulsion method is simple, effective, and convenience, which can be applied in the synthesis of various dual Janus silica particles for specific applications.

Flask-like Janus Colloidal Motors with Explicit Direction and Tunable Speed

Nanoparticles with an anisotropic morphology and composition are flourishing in various scientific fields. Their morphology has a great impact on their functions, but the precise regulation of their growth and final morphology is still challenging. Here, flask-like Janus particles (FJPs) with different compositions segmented on the inner and outer surfaces were fabricated via a sol-gel process using different silane precursors. The neck length of the flask-like particles can be controllably regulated by employing different silane precursors. The Pt catalyst was selectively loaded in their cavities, and as-formed FJPs@Pt are employed as colloidal motors. Due to the adjustable neck length, the Janus colloidal motors have explicit directionality and tunable speeds (max diffusion coefficient is 18.2 μm² s^-1).

Task-Specific Janus Materials in Heterogeneous Catalysis

Janus materials are anisotropic nano- and microarchitectures with two different faces consisting of distinguishable or opposite physicochemical properties. In parallel with the discovery of new methods for the fabrication of these materials, decisive progress has been made in their application, for example, in biological science, catalysis, pharmaceuticals, and, more recently, in battery technology. This Minireview systematically covers recent and significant achievements in the application of task-specific Janus nanomaterials as heterogeneous catalysts in various types of chemical reactions, including reduction, oxidative desulfurization and dye degradation, asymmetric catalysis, biomass transformation, cascade reactions, oxidation, transition-metal-catalyzed cross-coupling reactions, electro- and photocatalytic reactions, as well as gas-phase reactions. Finally, an outlook on possible future applications is given.

Single-Hole Janus Hollow Sphere

Cross-linked epoxy resin (EP) single-hole Janus hollow spheres are prepared by cross-linking induced phase separation within an emulsion droplet and selective modification. The droplet is composed of an EP oligomer, toluene, and hexadecane. 2-Ethyl-4-methylimidazole is used as the cross-linker added to the aqueous phase. During the cross-linking, hexadecane forms an eccentric core in the cross-linked EP sphere. A single hole forms across the shell after dissolving the solvents, and a single-hole hollow sphere is achieved. The hole and cavity size are controlled by adjusting the solvent content and cross-linker concentration. Furthermore, frozen wax is used as the core material instead of hexadecane to effectively protect the sphere's interior surface. Selective modification of the exterior and interior surfaces is thus permitted. As an example, a responsive single-hole Janus hollow sphere is prepared by the favorable growth of a silica-polyoxyethylene composite layer onto the exterior surface and a selective grafting of poly(2-diethylaminoethyl methacrylate) (PDEAEMA) by atom-transfer radical polymerization (ATRP) onto the interior. The Janus sphere is water-dispersible and controllably captures and releases oil from the aqueous environment as triggered by the pH value.

Application of Janus Particles in Point-of-Care Testing

Janus particles (JPs), named after the two-faced Roman god, are asymmetric particles with different chemical properties or polarities. JPs have been widely used in the biomedical field in recent years, including as drug carriers for targeted controlled drug release and as biosensors for biological imaging and biomarker detection, which is crucial in the early detection and treatment of diseases. In this review, we highlight the most recent advancements made with regard to Janus particles in point-of-care testing (POCT). Firstly, we introduce several commonly used methods for preparing Janus particles. Secondly, we present biomarker detection using JPs based on various detection methods to achieve the goal of POCT. Finally, we discuss the challenges and opportunities for developing Janus particles in POCT. This review will facilitate the development of POCT biosensing devices based on the unique properties of Janus particles.

Multi-Stimuli-Responsive Janus Hollow Polydopamine Nanotubes

A tubular-shaped Janus nanoparticle based on polydopamine that responds to near-infrared, magnetic, and pH stimuli is reported. The robust tubular polydopamine structure was obtained by optimizing the halloysite template-to-dopamine ratio during synthesis. The inner and outer surfaces of the tube were exposed at different steps of the template-sonication--etching process, enabling the differential surface modification of these surfaces. Poly(ethylene glycol) (PEG) and poly(N-isopropylacrylamide) (PNIPAM) were grafted to the outer and inner surface of the nanotube, respectively. The PEG-coated surface limited aggregation of the nanoparticles at elevated temperatures. The PNIPAM-coated interior enhanced doxorubicin loading and endowed the nanoparticle with temperature-responsive behavior. The deposition of precipitated Fe₃O₄ nanoparticles further modified the nanoparticles. The resulting magnetic Janus nanoparticles responded to pH, temperature, and magnetic fields. Temperature changes could be induced by near-infrared laser, and all three stimuli were found to influence release rates of adsorbed doxorubicin from the nanoparticles. The interaction of the stimuli on release kinetics was elucidated using a linear mixed model; reduced pH and NIR irradiation enhanced release while applying a static magnetic field retarded release. Furthermore, the mechanism was shifted toward Fickian behavior by applying a static magnetic field and low pH conditions. However, NIR irradiation only shifted the behavior toward Fickian behavior at low pH.

Shedding Light on Luminescent Janus Nanoparticles: From Synthesis to Photoluminescence and Applications

Luminescent Janus nanoparticles refer to a special category of Janus-based nanomaterials that not only exhibit dual-asymmetric surface nature but also attractive optical properties. The introduction of luminescence has endowed conventional Janus nanoparticles with many alluring light-responsive functionalities and broadens their applications in imaging, sensing, nanomotors, photo-based therapy, etc. The past few decades have witnessed significant achievements in this field. This review first summarizes well-established strategies to design and prepare luminescent Janus nanoparticles and then discusses optical properties of luminescent Janus nanoparticles based on downconversion and upconversion photoluminescence mechanisms. Various emerging applications of luminescent Janus nanoparticles are also introduced. Finally, opportunities and future challenges are highlighted with respect to the development of next-generation luminescent Janus nanoparticles with diverse applications.

Facile and scalable synthesis of functional Janus nanosheets - A polyethoxysiloxane assisted surfactant-free high internal phase emulsion approach

HYPOTHESIS

Janus nanosheets, which have two surfaces of different functionalities, exhibit unique interfacial properties. In this work, we propose a facile and scalable technique for preparation of silica-based Janus nanosheets, which is based on formation of high internal phase water-in-oil emulsions stabilized solely by alkyl-substituted polyethoxysiloxanes due to their hydrolysis-induced interfacial activity.

EXPERIMENTS

Janus nanosheets are then obtained by crushing the silica foams converted from such emulsions. The morphology of Janus nanosheets is investigated by field-emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). The chemical structure of functional silica materials is characterized by Fourier transform infrared spectroscopy (FT-IR). The asymmetric structure of silica nanosheets is observed by confocal laser scanning microscopy.

FINDINGS

The resulting nanosheets have a rough hydrophobic surface and a smooth hydrophilic one, and are capable of stabilizing Pickering oil-in-water emulsions. Remarkably, pH-responsiveness of emulsions can be attained using the nanosheets whose hydrophilic surface is substituted with amino groups. Fast oil-water separation is achieved by the Janus nanosheets, which has been demonstrated by the nanosheets with a polystyrene-coated hydrophobic surface. This work paves a new avenue for large-scale production of functional silica-based Janus nanosheets suitable for numerous promising applications.

Janus bifunctional periodic mesoporous organosilica

Synthesis of a Janus periodic mesoporous organosilica material (JPMO) is presented here. In this strategy, the surface of the hollow silica material was selectively functionalized with two different bridged organic-inorganic hybrid groups. It was found that the resulting bifunctional material is able to form a stable Pickering emulsion. This new type of PMO material may be suitable for widespread applications in various fields related to material science and catalysis.

Semi-IPNs Reinforced with Silica Janus Nanoparticles and Their Stress Sensing with Mechanoluminescent Probe

A series of nanocomposite elastomers are prepared by dispersing surface-modified silica Janus nanoparticles into semi-interpenetrating network (Semi-IPN) of polyurethane/polyethyl methacrylate. Benefiting from the hierarchically crosslinked structures that consist of physical interlocking mediated by hydrogen-bond-rich silica Janus nanoparticles and permanent crosslinking by Semi-IPN, these elastomers exhibit excellent mechanical properties. Moreover, the Janus nanosheet is found more effective in strengthening and toughening the Semi-IPN, in comparison to Janus hollow sphere. Since 1,2-dioxetane is covalently embedded in these elastomers as a mechanoluminescent stress probe, stress transfer between the polymer and Janus nanoparticles and the toughening mechanism can be illuminated, which offer exciting opportunities to study the failure process of complex polymer nanocomposites with high spatial and temporal resolution.

Responsive polymeric Janus cage

A robust thermo-responsive polymeric Janus cage with a PNIPAM-cPVBC-PEO sandwiched shell is synthesized. The Janus cage provides a general method of thermally triggered separation of oil/water emulsions independent of the type of surfactant and emulsion. It can selectively capture organic compounds at a higher temperature and release them at a lower temperature.

Controllable Assembly and Application of Janus Smart Nanosheets for Oil Displacement

Based on the development status of low permeability reservoirs, an intelligent nano-flooding agent is needed to improve the displacement efficiency of reservoirs. Janus particles have the characteristics of small size and strong interfacial activity, and the solid surfactant of Janus particles has attracted more and more attention of petroleum researchers. Janus smart nanosheets were developed by Pickering emulsion preparation. Controllable assemblies of Janus smart nanosheets were formed by adjusting the preparation ratio. The structure and properties of smart nanosheets were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy and interfacial tensiometer. The nanosheets have hydrophilic and hydrophilic properties. The particle size of silica nanoparticle is 10 nm. After surface modification and high shear stress treatment, nanosheet was formed. The thickness of nanosheet dispersed in aqueous solution was 30.2 nm. Experimental results show that at a given temperature, the Janus nanosheet system with low concentration can achieve ultra-low interfacial tension of 10-4 mN /m, and the nanosheets have good emulsifying ability. The results provide basic insights into the bio-assembly behavior and emulsifying properties of Janus smart nanosheets, and further prove their potential for enhancing oil recovery.

Induced Aggregation of Epoxy Polysiloxane Grafted Gelatin by Organic Solvent and Green Application

In this paper, we studied the aggregation of amphiphilic polymer epoxy-terminated polydimethylsiloxane (PDMS-E) grafted gelatin (PGG) in water induced by methanol, ethanol, 2-propanol, acetone, tetrahydrofuran (THF), and 1,4-dioxane. The aggregation pattern of the polymer was monitored by infrared spectroscopy, X-ray diffraction, transmission electron microscopy, and scanning electron microscopy. It was revealed that the aggregate morphology showed clear dependence on the solvent polarity. The PGG aggregates had regular spherical morphology in polar solvents, including water, methanol, ethanol, 2-propanol, and acetone. The coating performance was evaluated by X-ray photoelectron spectroscopy and friction experiment, and PGG and acetone coating exhibited excellent coating performance on the surface of pigskin. Gel was formed in acetone and tetrahydrofuran (THF) with the slow evaporation of solvent, and this property can possibly be applied to industrial sewage treatment. White precipitate and soft film were formed in non-polar 1,4-dioxane.

Preparation and Investigation of Intelligent Polymeric Nanocapsule for Enhanced Oil Recovery

Micro-/nanomotors colloidal particles have attracted increasing interest as composite surfactants, owing to the combined advantages of both Janus solid surfactants and micro-/nanomotors. Here we put micro-/nanomotors colloidal particles into hollow polymeric micro-encapsulates. An intelligent polymeric nanocapsule was prepared for enhanced oil recovery by the self-assembly method. The particle size range of the polymeric capsule can be controlled between 20 to 1000 nm by adjusting the cross-linking thickness of the capsule's outer membrane. The average particle size of polymeric capsules prepared in the study was 300 nm. The structure and properties of the Intelligent polymeric nanocapsule was characterized by a wide range of technics such as Fourier transform infrared spectroscopy, scanning electron microscopy by laser diffraction, fluorescence microscopy, pendant drop tensiometer, laser particle size instrument, and interface tension analyzer. It was found that the intelligent polymeric nanocapsule exhibited significant interfacial activity at the oil-water interface. When the Janus particles' concentration reached saturation concentration, the adsorption of the amphiphilic nanoparticles at the interface was saturated, and the equilibrium surface tension dropped to around 31 mN/m. When the particles' concentration reached a critical concentration of aggregation, the Gibbs stability criterion was fulfilled. The intelligent polymeric nanocapsule system has a better plugging and enhanced oil recovery capacity. The results obtained provide fundamental insights into the understanding of the assembly behavior and emulsifying properties of the intelligent polymeric nanocapsule, and further demonstrate the future potential of the intelligent polymeric nanocapsule used as colloid surfactants for enhanced oil recovery applications.

Amphiphilic Janus nanosheets by grafting reactive rubber brushes for reinforced rubber materials

An amphiphilic Janus nanosheet with different reactive rubber brushes on two opposite sides can simultaneously strengthen and toughen rubber blends.

One-Step Assembly of a Biomimetic Biopolymer Coating for Particle Surface Engineering

Advances in material design and applications are highly dependent on the development of particle surface engineering strategies. However, few universal methods can functionalize particles of different compositions, sizes, shapes, and structures. The amyloid-like lysozyme assembly-mediated surface functionalization of inorganic, polymeric or metal micro/nanoparticles in a unique amyloid-like phase-transition buffer containing lysozyme are described. The rapid formation of a robust nanoscale phase-transitioned lysozyme (PTL) coating on the particle surfaces presents strong interfacial binding to resist mechanical and chemical peeling under harsh conditions and versatile surface functional groups to support various sequential surface chemical derivatizations, such as radical living graft polymerization, the electroless deposition of metals, biomineralization, and the facile synthesis of Janus particles and metal/protein capsules. Being distinct from other methods, the preparation of this pure protein coating under biocompatible conditions (e.g., neutral pH and nontoxic reagents) provides a reliable opportunity to directly modify living cell surfaces without affecting their biological activity. The PTL coating arms yeasts with a functional shell to protect their adhered body against foreign enzymatic digestion. The PTL coating further supports the surface immobilization of living yeasts for heterogeneous microbial reactions and the sequential surface chemical derivatization of the cell surfaces, e.g., radical living graft polymerization.

Janus Colloids toward Interfacial Engineering

Janus colloids are functional particles consisting of two surfaces (or internal materials) with distinct physical or chemical properties in the same particle. Owing to their amphiphilic nature, Janus colloids composed of both hydrophilic and hydrophobic faces provide a powerful tool to generate functional surfaces and to manipulate the properties of interfaces. Amphiphilic Janus colloids have shown promising applications as particulate surfactants in oil/water separation, as interfacial compatibilizers in polymer blends, and as assembly blocks in robust coatings with unique wettability. In this Feature Article, we summarize recent advances in engineering interfaces by using Janus colloids.

Ultrathin Janus nanodiscs

Ultrathin Janus nanodiscs with single molecular scale thickness are fabricated by self-organized sol–gel process against a patchy magnetic microsphere.

Coral-like Janus Porous Spheres

A Janus porous sphere with a coral-like microstructure is prepared by stepwise dealloying a metallic alloy sphere and sequential modification (for example, using silanes and polymers). Nanoscale coral-like microstructure of the internal skeleton gives remarkable capillary force, thus accelerating the mass transportation. Starting from the outer layer of the sphere, stepwise dealloying can achieve different layers inwardly, thus introducing different composition and performance. As an example, poly(ethylene glycol)-poly(N-isopropylacrylamide) (PEG-PNIPAM)- and poly(ethylene glycol)-poly(N,N-diethylamino-2-ethylmethacrylate) (PEG-PDEAEMA)-responsive Janus porous spheres can quickly capture oil by simply changing temperature or pH. Similarly, release is also triggered.

Janus Nanocage toward Platelet Delivery

The platelet-shaped Janus nanocages with a mesoporous silica shell are prepared. PEG moiety onto the exterior surface is responsible for good dispersity in water. The graphene sheet inside the cavity is responsible for hydrophobic performance to selectively capture hydrophobic species, and photothermal effect by NIR irradiation. As a biocompatible DOX-loaded Janus platelet delivery, HeLa cell cytotoxicity is greatly enhanced under NIR irradiation. There exists a synergetic effect between the chemotherapy and photothermal therapy.

Water-oil Janus emulsions: microfluidic synthesis and morphology design

In this work we developed a facile method to prepare water-oil Janus emulsions in situ with tunable morphologies by using a double-bore capillary microfluidic device. In addition, by combining the theory model and our liquids' properties, we propose a method to design the morphology of water-oil Janus emulsions. To systematically research Janus morphologies we combined the theory model and the fluids' properties. Under the model guidance, we carefully selected the liquids system where only the interfacial tension between the water phase and the continuous phase changed while keeping the other two interfacial tensions unchanged. Thus we could adjust the Janus morphology by changing the surfactant mass fraction in the continuous phase. In addition, with the double-bore capillary, we prepared water-oil Janus emulsions with a large flow ratio range. By adjusting the flow ratio and the surfactant mass fraction, we successfully prepared Janus emulsions with gradual morphology changes, which would be meaningful in fields that have a high demand for morphology designing of amphiphilic Janus particles.

Toward Scalable Fabrication of Hierarchical Silica Capsules with Integrated Micro-, Meso-, and Macropores

Hierarchical porous structures are ubiquitous in biological organisms and inorganic systems. Although such structures have been replicated, designed, and fabricated, they are often inferior to naturally occurring analogues. Apart from the complexity and multiple functionalities developed by the biological systems, the controllable and scalable production of hierarchically porous structures and building blocks remains a technological challenge. Herein, a facile and scalable approach is developed to fabricate hierarchical hollow spheres with integrated micro-, meso-, and macropores ranging from 1 nm to 100 μm (spanning five orders of magnitude). (Macro)molecules, micro-rods (which play a key role for the creation of robust capsules), and emulsion droplets have been successfully employed as multiple length scale templates, allowing the creation of hierarchical porous macrospheres. Thanks to their specific mechanical strength, these hierarchical porous spheres could be incorporated and assembled as higher level building blocks in various novel materials.

Thermodynamically Stable Pickering Emulsion Configured with Carbon-Nanotube-Bridged Nanosheet-Shaped Layered Double Hydroxide for Selective Oxidation of Benzyl Alcohol

A simple strategy to configure a high thermodynamically stable Pickering emulsion with 2D sheet-shaped layered double hydroxide (LDH) coupled carbon nanotube (CNT) nanohybrid (LDH-CNT) is reported. With the benefit of a unique 2D sheet-shaped structure of the LDH, the as-made LDH-CNTs with amphiphilicity as solid emulsifiers have a good capability for assembling and stabilizing at the water-oil interface, and a superior thermostability emulsion is delivered, indicative of an increased catalytic performance for selective oxidation of benzyl alcohol to benzaldehyde. Such a unique and excellent thermodynamic stability characteristic makes high reaction interfacial areas well-kept during the reaction process, yielding high catalytic performance. The present strategy provides a simple method for configuration and design of solid nanoparticle emulsifiers with high thermodynamic stability, which will make such a material be of great potential in many important applications such as catalysis and emulsifiers.