Advances in ionic liquids as fluorescent sensors

Ionic liquids (ILs) are a class of liquid salts with characteristics such as a low melting point, an ionic nature, non-volatility, and tunable properties. Because of their adaptability, they have a significant influence in the field of fluorescence. This paper reviews the primary literature on the use of ILs in fluorescence sensing technologies. The kind of target material is utilized to classify the fluorescence sensors made with the use of ILs. They include using ILs as probes for metals, nitro explosives, small organic compounds, anions, and gases. The efficacy of an IL-based fluorescence sensor depends on the precise design to guarantee specificity, sensitivity, and a consistent reaction to the desired analyte. The precise method can differ depending on the chemical properties of the IL, the choice of fluorophore, and the interactions with the analyte. Overall, the viability of the aforementioned materials for chemical analysis is evaluated, and prospective possibilities for further development are identified.

Nontraditional Redox Active Aliphatic Luminescent Polymer for Ratiometric pH Sensing and Sensing-Removal-Reduction of Cu(II): Strategic Optimization of Composition

Here, redox active aliphatic luminescent polymers (ALPs) are synthesized via polymerization of N,N-dimethyl-2-propenamide (DMPA) and 2-methyl-2-propenoic acid (MPA). The structures and properties of the optimum ALP3, ALP3-aggregate and Cu(I)-ALP3, ratiometric pH sensing, redox activity, aggregation enhanced emission (AEE), Stokes shift, and oxygen-donor selective coordination-reduction of Cu(II) to Cu(I) are explored via spectroscopic, microscopic, density functional theory-reduced density gradient (DFT-RDG), fluorescence quenching, adsorption isotherm-thermodynamics, and electrochemical methods. The intense blue and green fluorescence of ALP3 emerges at pH = 7.0 and 9.0, respectively, due to alteration of fluorophores from -C(═O)N(CH₃ )₂ / -C(═O)OH to -C(O^- )═N⁺ (CH₃ )₂ / -C(═O)O^- , inferred from binding energies at 401.32 eV (-C(O^- )═N⁺ (CH₃ )₂ ) and 533.08 eV (-C(═O)O^- ), significant red shifting in absorption and emission spectra, and peak at 2154 cm^-1 . The n-π* communications in ALP3-aggregate, hydrogen bondings within 2.34-2.93 Å (intramolecular) in ALP3 and within 1.66-2.89 Å (intermolecular) in ALP3-aggregate, respectively, contribute significantly in fluorescence, confirmed from NMR titration, ratiometric pH sensing, AEE, excitation dependent emission, and Stokes shift and DFT-RDG analyses. For ALP3, Stokes shift, excellent limit of detection, adsorption capacity, and redox potentials are 13561 cm^-1 /1.68 eV, 0.137 ppb, 122.93 mg g^-1 , and 0.33/-1.04 V at pH 7.0, respectively.

A New Polystyrene-Poly(vinylpyridinium) Ionic Copolymer Dopant for n-Type All-Polymer Thermoelectrics with High and Stable Conductivity Relative to the Seebeck Coefficient giving High Power Factor

A novel n-type copolymer dopant polystyrene-poly(4-vinyl-N-hexylpyridinium fluoride) (PSpF) with fluoride anions is designed and synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization. This is thought to be the first polymeric fluoride dopant. Electrical conductivity of 4.2 S cm^-1 and high power factor of 67 µW m^-1 K^-2 are achieved for PSpF-doped polymer films, with a corresponding decrease in thermal conductivity as the PSpF concentration is increased, giving the highest ZT of 0.1. An especially high electrical conductivity of 58 S cm^-1 at 88 °C and outstanding thermal stability are recorded. Further, organic transistors of PSpF-doped thin films exhibit high electron mobility and Hall mobility of 0.86 and 1.70 cm² V^-1 s^-1 , respectively. The results suggest that polystyrene-poly(vinylpyridinium) salt copolymers with fluoride anions are promising for high-performance n-type all-polymer thermoelectrics. This work provides a new way to realize organic thermoelectrics with high conductivity relative to the Seebeck coefficient, high power factor, thermal stability, and broad processing window.

Internet of Things-Enabled Aggregation-Induced Emission Probe for Cu2+ Ions: Comprehensive Investigations and Three-Dimensional Printed Portable Device Design

Herein, we have developed a novel aggregation-induced emission (AIE) probe and three-dimensional (3D) printed portable device for copper (Cu²⁺) sensing in an aqueous medium. A ubiquitous synthetic route has been employed to devise the anthracene-conjugated imidazo[1,5-a]pyridine (TL19) probe as a unique anchor for Cu²⁺ ions. The TL19 is meticulously characterized through pivotal spectroscopic techniques, and the satisfactory results were obtained. The solvatochromic analysis and density functional theory calculations cohesively reveal that the TL19 exhibits the intramolecular charge transfer transition upon photoexcitation. Intriguingly, the TL19 exhibits spherically shaped nanoaggregates and enhanced fluorescence in DMSO/water (10:90) mixtures. This fluorescent nanoaggregate instantaneously responded toward the detection of Cu²⁺ via a deaggregation mechanism. The detection limit is found to be 9 pM in an aqueous medium. Further, the detection of Cu²⁺ in the HeLa cells has also been achieved due to bright green fluorescence, photostability, and biocompatibility nature of TL19 aggregates. On the other hand, an internet of things (IoT)-embedded 3D printed portable device is constructed for the detection of Cu²⁺ ions in real water samples. The Cu²⁺ detection is achieved through an IoT device, and results were acknowledged through an android application in 3.32 s round-trip time. Thus, the IoT-enabled AIE probe could be a prospective device for Cu²⁺ detection in a constrained environment.

Fine-Tuning the Electronic Properties of Azo Chromophore-Incorporated Perylene Bisimide Dyads

Perylene bisimide (PBI) and azo-compounds are fascinating molecules with interesting optical properties. Here, we combine the two chromophores to prepare nonconjugated and conjugated stable azo-PBI dyes. The detailed structural characterization, comparison of properties, and solid-state self-assembly of the compounds are discussed. The incorporation of azo groups at the bay side of PBI led to significant changes in optical properties as compared to the model PBIs (M₁ and M₂). All new azo-PBIs showed photoinduced isomerization, which caused disaggregation and enhancement in fluorescence. The amine-incorporated azo-PBIs (3 and 6) reduced chloroauric acid into gold nanoparticles. The current study offers a simple synthetic strategy and comparison of the properties of conjugated and nonconjugated azo-PBIs, which could be useful in photoelectronic devices.

A novel polydopamine electrochemiluminescence organic nanoparticle-based biosensor for parathyroid hormone detection

In this work, polydopamine electrochemiluminescence (ECL)-organic nanoparticles (EONs) based immunosensing strategy was designed for parathyroid hormone (PTH) detection. Dopamine is oxidized and polymerized to form polydopamine organic nanoparticle via self-polymerization process. Unlike the low photoluminescent efficiency and unsatisfactory fluorescence characters of the fluorescent organic nanoparticles (FONs), the polydopamine EONs do not only show unique physicochemical properties and excellent biocompatibility, but also provide ideal electrochemical properties and bright ECL signals, which can be employed as high-quality ECL luminophores. The ECL-related properties and performance of the EONs are further discussed in this paper. The sensing method has a linear response in the range of 0.05-8 ng/mL with a detection limit of 17 pg/mL. The applicability of this method is evaluated through the determination of PTH in human plasma samples with satisfactory results. To our best knowledge, this was the first time about the exploration of polydopamine organic nanoparticles as ECL luminophores in the biosensing application.

A Cross-Linker-Based Poly(Ionic Liquid) for Sensitive Electrochemical Detection of 4-Nonylphenol

In this study, we report a cross-linker-based poly(ionic liquid) (PIL) for the sensitive detection of 4-nonylphenol (4-NP). PIL was poly(1,4-butanediyl-3,3′-bis-l-vinylimidazolium dibromide) (poly([V₂C₄(mim)₂]Br₂)). Poly([V₂C₄(mim)₂]Br₂) was prepared via one-step free-radical polymerization. The poly([V₂C₄(mim)₂]Br₂) was characterized by infrared spectroscopy, Raman spectroscopy, thermal gravimetric analyzer and scanning electron microscope. The poly([V₂C₄(mim)₂]Br₂) was then drop-cast onto a glassy carbon electrode (GCE) to obtain poly([V₂C₄(mim)₂]Br₂)/GCE. In comparison with a bare GCE, poly([V₂C₄(mim)₂]Br₂)/GCE exhibited higher peak current responses for [Fe(CN)₆]^3−/4−, lower charge transfer resistance, and larger effective surface area. While comparing the peak current responses, we found the peak current response for 4-NP using poly([V₂C₄(mim)₂]Br₂)/GCE to be 3.6 times higher than a traditional cross-linker ethylene glycol dimethacrylate (EGDMA) based poly(EGDMA) modified GCE. The peak current of poly([V₂C₄(mim)₂]Br₂) sensor was linear to 4-NP concentration from 0.05 to 5 μM. The detection limit of 4-NP was obtained as 0.01 μM (S/N = 3). The new PIL based electrochemical sensor also exhibited excellent selectivity, stability, and reusability. Furthermore, the poly([V₂C₄(mim)₂]Br₂)/GCE demonstrated good 4-NP detection in environmental water samples.

Insights into the aggregation-induced emission of 1,8-naphthalimide-based supramolecular hydrogels

The study of aggregation-induced emission (AIE) of a series of 1,8-naphthalimide derivatives in aqueous media is reported herein. Some of these molecules constitute the first examples of 1,8-naphthalimide-containing amino acid derivatives that form hydrogels with excellent photophysical and mechanical properties. The present study provides further insights for the rational design of water-compatible stimuli-responsive photonic materials presenting AIE. AIE was quantitatively evaluated by measuring the fluorescence quantum yields of the molecules. Gelators 1 and 2 exhibit self-assembled fibrillar morphologies and present the best performance regarding the AIE effect, showing a remarkable enhancement in fluorescence intensity of 4700% and reaching a notable fluorescence quantum yield (Φf) of 30%. Non-gelator molecules 6 and 7 form nanoparticles, which also present AIE, but with emissions corresponding to their excimers. Therefore, the AIE intensity and wavelength are regulated by the type of aggregate morphology: fibers, nanoparticles or soluble species.

Binding mode dependent signaling for the detection of Cu2+: An experimental and theoretical approach with practical applications

Two amido-schiff bases (3-Hydroxy-naphthalene-2-carboxylic acid pyren-1-ylmethylene-hydrazide and Naphthalene-2-carboxylic acid pyren-1-ylmethylene-hydrazide) have been synthesized having a common structural unit and only differs by a -OH group in the naphthalene ring. Both of them can detect Cu²⁺ ion selectively in semi-aqueous medium in distinctly different output modes (one detects Cu²⁺ by naked-eye color change where as the other detects Cu²⁺ by fluorescence enhancement). The difference in the binding of Cu ²⁺ with the compounds is the reason for this observation. The detection limit is found to be micromolar region for compound which contains -OH group whereas the compound without -OH group detects copper in nano-molar region. DFT calculations have been performed in order to demonstrate the structure of the compounds and their copper complexes. Practical utility has been explored by successful paper strip response of both the compounds. The biological applications have been evaluated in RAW 264.7.

Novel imidazole fluorescent poly(ionic liquid) nanoparticles for selective and sensitive determination of pyrogallol

This paper reports novel imidazole fluorescent poly(ionic liquid) nanoparticles (FPILNs) of poly(1-[(4-methyphenyl)methyl]-3-vinyl-imidazolium bromide (poly([MVI]Br) for selective and sensitive determination of pyrogallol. An imidazole ionic liquid of 1-[(4-methyphenyl)methyl]-3-vinyl-imidazolium bromide ([MVI]Br) was synthesized and used as the only monomer to obtain poly([MVI]Br) possessing phenyl fluorophores using a radical polymerization technique. The obtained poly([MVI]Br) can form nanoparticles in water. Scanning electron microscopy and dynamic light scattering results revealed majority of poly([MVI]Br) FPILNs with diameters ranging from 40 to 400nm. Although [MVI]Br showed weak fluorescence intensity, poly([MVI]Br) FPILNs exhibited strong fluorescence intensity with a quantum yield of 0.192, which is attributed to the presence of significant number of phenyl fluorophores and rigid construction. The selective and sensitive determination of pyrogallol was achieved through fluorescence quenching of poly([MVI]Br) FPILNs, and the quenching was attributed to the oxidation of poly([MVI]Br) FPILNs by O₂˙¯ produced by pyrogallol autoxidation. The poly([MVI]Br) FPILNs-based sensor demonstrated a good linear relationship between the extent of fluorescence quenching and the concentration of pyrogallol in a range of 0.05 - 10.0μM, achieving a detection limit of 0.01μM. Furthermore, the poly([MVI]Br) FPILNs-based assay detected pyrogallol in environmental water samples, suggesting its potential to be applied for practical purposes.

Visible-light/temperature dual-responsive hydrogel constructed by α-cyclodextrin and an azobenzene linked surfactant

A novel photo-responsive anionic surfactant with a dimethylamino-substituted azobenzene located at the end of the hydrophobic chain, 6-(4-dimethylaminoazobenzene-4'-oxy)hexanoate sodium (DAH), has been designed. Through the host-guest interaction in aqueous solution, the trans-DAH could be spontaneously included by using two native α-cyclodextrin (α-CD) molecules. The formed hydrophilic inclusion complex (DAH@2α-CD), however, could act as a gelator to induce the formation of a supramolecular hydrogel, which is driven mainly by hydrogen bonds between neighboring α-CDs and also between the carboxylate in DAH and water. Compared with common hydrogels that consist of networks with fibres or discrete polymer chains, the hydrogel formed by DAH@2α-CD was composed of periodic lamellar structures possessing good shear-thinning behavior and much swollen water layers. The more interesting point for such a hydrogel was its visible-light responsibility for gel-sol reversible phase transition. This originated from the introduction of an electron-donating group (dimethylamino) to azobenzene, which noticeably red-shifted the responsive wavelength for its trans-to-cis isomerization. It was also worth noting that the host-guest interaction between azobenzene in DAH and α-CD significantly improved the photo-transition efficiency from trans to cis forms of azobenzene, which played a critical role in the visible-light responsibility of the hydrogel. This unique visible-light-responsive behavior combined with the inherent thermo-responsive property from α-CD should make the prepared hydrogel find more potential applications in biomedical systems.

Cellular membrane-anchored fluorescent probe with aggregation-induced emission characteristics for selective detection of Cu2+ ions

The exploration of advanced fluorescent probes that can detect divalent copper (Cu²⁺) in aqueous environments and even in live organisms is particularly valuable for understanding the occurrence and development of Cu²⁺-related diseases. In this work, we report the design and synthesis of an aggregation-induced emission luminogen (AIEgen)-based probe (TPE-Py-EEGTIGYG) by integrating an AIEgen, TPE-Py, with a peptide, EEGTIGYG, which can selectively detect Cu²⁺ in both aqueous solution and live cells. Peptide EEGTIGYG has dual functionality in the probe design, namely improving water solubility and providing specific cell membrane-binding ability. TPE-Py-EEGTIGYG can self-assemble into nanoaggregates at high concentration in aqueous solution (e.g., 25 μM), which possess large fluorescence output due to the restriction of intramolecular rotation of the phenyl rings on TPE-Py. The fluorescence of the TPE-Py-EEGTIGYG nanoaggregates can be significantly quenched by Cu²⁺ but not by other metal ions, achieving the selective detection of Cu²⁺ in aqueous media. Furthermore, TPE-Py-EEGTIGYG can exist as a molecular species and is very weakly fluorescent in dilute aqueous solution (e.g., 5 μM), but can however largely switch on its fluorescence upon specifically anchoring onto the cell membrane. The emissive probes on the cell membrane can be used for the detection of Cu²⁺ ions that move in and out of cells with a fluorescence “turn-off” mode.

Hydrogen bond-assisted aggregation-induced emission and application in the detection of the Zn(ii) ion

The compounds of 3-aminopyridine-2-carboxylic acid with K(+) (1) and Zn(2+) (2) were found to be AIE-active. The AIE behaviours could be attributed to the restriction of intramolecular rotation (RIR) and vibration (RIV) via hydrogen bonds, resulting in rigidity enhancement of the molecules. An AIE-based fluorescence turn on chemosensor for the Zn(ii) ion has been developed in aqueous media with high selectivity and sensitivity.

Green light-emitting polyepinephrine-based fluorescent organic dots and its application in intracellular metal ions sensing

In this paper, we present a class of bio-dots, polyepinephrine (PEP)-based fluorescent organic dots (PEP-FODs) for selective and sensitive detection of Fe(2+), Fe(3+), and Cu(2+). The PEP-FODs were derived from epinephrine via self-polymerization at relatively low temperature down to 60°C with low cytotoxicity and relative long lifetime (7.24ns). The surface morphology and optical properties of the synthesized PEP-FODs were characterized. We found that the diameters of PEP-FODs were mainly distributed in the narrow range of 2-4nm with an average diameter of 2.9nm. An optimal emission peak located at 490nm was observed when the green light-emitting PEP-FODs were excited at 400nm. It is discovered that Fe(2+), Fe(3+), and Cu(2+)can strongly quench the fluorescence of PEP-FODs through the nonradiative electron-transfer. The detection limit of 0.16, 0.67, and 0.15μM was obtained for Fe(2+), Fe(3+), and Cu(2+), respectively. The independent sensing platform of Fe(2+), Fe(3+), and Cu(2+)could be established by using NaF as a complexing agent and by regulating the reaction time between NaF and metal ions. Cell viability studies reveal that the as-prepared PEP-FODs possess good solubility and biocompatibility, making it as excellent imaging nanoprobes for intracellular Fe(2+), Fe(3+), and Cu(2+)sensing. The developed PEP-FODs might hold great promise to broaden applications in nanotechnology and bioanalysis.

A new class of red fluorescent organic nanoparticles: noncovalent fabrication and cell imaging applications

Cyano-substituted diarylethlene derivatives R-OMe (-H, -CF3) with different peripheral substituted groups were synthesized in high yield. Water-soluble red fluorescent organic nanoparticles (FONs) could be facilely prepared from them via hydrophobic interaction with polyoxyethylene-polyoxypropylene-polyoxyethylene triblock copolymer (Pluronic F127). The optical properties and surface morphology of the synthesized FONs were characterized, and their biocompatibilities as well as their applications in cell imaging were further investigated. We demonstrate that such red FONs exhibit antiaggregation-caused quenching properties, broad excitation wavelengths, excellent water dispersibilities, and biocompatibilities, making them promising for cell imaging.

Biocompatible polydopamine fluorescent organic nanoparticles: facile preparation and cell imaging

Biocompatible fluorescent organic nanoparticles with tunable photoluminescence were prepared via the one-pot oxidation of polydopamine and subsequently utilized for cell imaging.

Water-dispersible, uniform nanospheres by heating-enabled micellization of amphiphilic block copolymers in polar solvents

Uniform nanospheres with tunable size down to 30 nm were prepared simply by heating amphiphilic block copolymers in polar solvents. Unlike reverse micelles prepared in nonpolar, oily solvents, these nanospheres have a hydrophilic surface, giving them good dispersibility in water. Furthermore, they are present as individual, separated, rigid particles upon casting from the solution other than continuous thin films of merged micelles cast from micellar solution in nonpolar solvents. These nanospheres were generated by a heating-enabled micellization process in which the affinity between the solvent and the polymer chains as well as the segmental mobility of both hydrophilic and hydrophobic blocks was enhanced, triggering the micellization of the glassy copolymers in polar solvents. This heating-enabled micellization produces purely well-defined nanospheres without interference of other morphologies. The micelle sizes and corona thickness are tunable mainly by changing the lengths of the hydrophobic and hydrophilic blocks, respectively. The heating-enabled micellization route for the preparation of polymeric nanospheres is extremely simple, and is particularly advantageous in producing rigid, micellar nanospheres from block copolymers with long glassy, hydrophobic blocks which are otherwise difficult to prepare with high efficiency and purity. Furthermore, encapsulation of hydrophobic molecules (e.g., dyes) into micelle cores could be integrated into the heating-enabled micellization, leading to a simple and effective process for dye-labeled nanoparticles and drug carriers.