43Ca MAS-DNP NMR of Frozen Solutions for the Investigation of Calcium Ion Complexation

Calcium ion complexation in aqueous solutions is of paramount importance in biology as it is related to cell signaling, muscle contraction, or biomineralization. However, Ca2+-complexes are dynamic soluble entities challenging to describe at the molecular level. Nuclear magnetic resonance appears as a method of choice to probe Ca2+-complexes. However, 43Ca NMR exhibits severe limitations arising from the low natural abundance coupled to the low gyromagnetic ratio and the quadrupolar nature of 43Ca, which overall make it a very unreceptive nucleus. Here, we show that 43Ca dynamic nuclear polarization (DNP) NMR of 43Ca-labeled frozen solutions is an efficient approach to enhance the NMR receptivity of 43Ca and to obtain structural insights about calcium ions complexed with representative ligands including water molecules, ethylenediaminetetraacetic acid (EDTA), and l-aspartic acid (l-Asp). In these conditions and in combination with numerical simulations and calculations, we show that 43Ca nuclei belonging to Ca2+ complexed to the investigated ligands exhibit rather low quadrupolar couplings (with CQ typically ranging from 0.6 to 1 MHz) due to high symmetrical environments and potential residual dynamics in vitrified solutions at a temperature of 100 K. As a consequence, when 1H→43Ca cross-polarization (CP) is used to observe 43Ca central transition, "high-power" νRF(43Ca) conditions, typically used to detect spin 1/2 nuclei, provide ∼120 times larger sensitivity than "low-power" conditions usually employed for detection of quadrupolar nuclei. These "high-power" CPMAS conditions allow two-dimensional (2D) 1H-43Ca HetCor spectra to be readily recorded, highlighting various Ca2+-ligand interactions in solution. This significant increase in 43Ca NMR sensitivity results from the combination of distinct advantages: (i) an efficient 1H-mediated polarization transfer from DNP, resembling the case of low-natural-abundance spin 1/2 nuclei, (ii) a reduced dynamics, allowing the use of CP as a sensitivity enhancement technique, and (iii) the presence of a relatively highly symmetrical Ca environment, which, combined to residual dynamics, leads to the averaging of the quadrupolar interaction and hence to efficient high-power CP conditions. Interestingly, these results indicate that the use of high-power CP conditions is an effective way of selecting symmetrical and/or dynamic 43Ca environments of calcium-containing frozen solution, capable of filtering out more rigid and/or anisotropic 43Ca sites characterized by larger quadrupolar constants. This approach could open the way to the atomic-level investigation of calcium environments in more complex, heterogeneous frozen solutions, such as those encountered at the early stages of calcium phosphate or calcium carbonate biomineralization events.

Nuclear Magnetic Resonance and Metadynamics Simulations Reveal the Atomistic Binding of l-Serine and O-Phospho-l-Serine at Disordered Calcium Phosphate Surfaces of Biocements

Interactions between biomolecules and structurally disordered calcium phosphate (CaP) surfaces are crucial for the regulation of bone mineralization by noncollagenous proteins, the organization of complexes of casein and amorphous calcium phosphate (ACP) in milk, as well as for structure-function relationships of hybrid organic/inorganic interfaces in biomaterials. By a combination of advanced solid-state NMR experiments and metadynamics simulations, we examine the detailed binding of O-phospho-l-serine (Pser) and l-serine (Ser) with ACP in bone-adhesive CaP cements, whose capacity of gluing fractured bone together stems from the close integration of the organic molecules with ACP over a subnanometer scale. The proximity of each carboxy, aliphatic, and amino group of Pser/Ser to the Ca²⁺ and phosphate species of ACP observed from the metadynamics-derived models agreed well with results from heteronuclear solid-state NMR experiments that are sensitive to the ¹³C-³¹P and ¹⁵N-³¹P distances. The inorganic/organic contacts in Pser-doped cements are also contrasted with experimental and modeled data on the Pser binding at nanocrystalline HA particles grown from a Pser-bearing aqueous solution. The molecular adsorption is driven mainly by electrostatic interactions between the negatively charged carboxy/phosphate groups and Ca²⁺ cations of ACP, along with H bonds to either protonated or nonprotonated inorganic phosphate groups. The Pser and Ser molecules anchor at their phosphate/amino and carboxy/amino moieties, respectively, leading to an extended molecular conformation across the surface, as opposed to an "upright standing" molecule that would result from the binding of one sole functional group.

In-cell NMR: Why and how?

NMR spectroscopy has been applied to cells and tissues analysis since its beginnings, as early as 1950. We have attempted to gather here in a didactic fashion the broad diversity of data and ideas that emerged from NMR investigations on living cells. Covering a large proportion of the periodic table, NMR spectroscopy permits scrutiny of a great variety of atomic nuclei in all living organisms non-invasively. It has thus provided quantitative information on cellular atoms and their chemical environment, dynamics, or interactions. We will show that NMR studies have generated valuable knowledge on a vast array of cellular molecules and events, from water, salts, metabolites, cell walls, proteins, nucleic acids, drugs and drug targets, to pH, redox equilibria and chemical reactions. The characterization of such a multitude of objects at the atomic scale has thus shaped our mental representation of cellular life at multiple levels, together with major techniques like mass-spectrometry or microscopies. NMR studies on cells has accompanied the developments of MRI and metabolomics, and various subfields have flourished, coined with appealing names: fluxomics, foodomics, MRI and MRS (i.e. imaging and localized spectroscopy of living tissues, respectively), whole-cell NMR, on-cell ligand-based NMR, systems NMR, cellular structural biology, in-cell NMR… All these have not grown separately, but rather by reinforcing each other like a braided trunk. Hence, we try here to provide an analytical account of a large ensemble of intricately linked approaches, whose integration has been and will be key to their success. We present extensive overviews, firstly on the various types of information provided by NMR in a cellular environment (the "why", oriented towards a broad readership), and secondly on the employed NMR techniques and setups (the "how", where we discuss the past, current and future methods). Each subsection is constructed as a historical anthology, showing how the intrinsic properties of NMR spectroscopy and its developments structured the accessible knowledge on cellular phenomena. Using this systematic approach, we sought i) to make this review accessible to the broadest audience and ii) to highlight some early techniques that may find renewed interest. Finally, we present a brief discussion on what may be potential and desirable developments in the context of integrative studies in biology.

Recent progress in solid-state nuclear magnetic resonance of half-integer spin low-γ quadrupolar nuclei applied to inorganic materials

An overview is presented of recent progress in the solid-state nuclear magnetic resonance (NMR) observation of low-γ nuclei, with a focus on applications to inorganic materials. The technological and methodological advances in the last 20 years, which have underpinned the increased accessibility of low-γ nuclei for study by solid-state NMR techniques, are summarised, including improvements in hardware, pulse sequences and associated computational methods (e.g., first principles calculations and spectral simulation). Some of the key initial observations from inorganic materials of these nuclei are highlighted along with some recent (most within the last 10 years) illustrations of their application to such materials. A summary of other recent reviews of the study of low-γ nuclei by solid-state NMR is provided so that a comprehensive understanding of what has been achieved to date is available.

Solid State NMR Spectroscopy a Valuable Technique for Structural Insights of Advanced Thin Film Materials: A Review

Solid-state NMR has proven to be a versatile technique for studying the chemical structure, 3D structure and dynamics of all sorts of chemical compounds. In nanotechnology and particularly in thin films, the study of chemical modification, molecular packing, end chain motion, distance determination and solvent-matrix interactions is essential for controlling the final product properties and applications. Despite its atomic-level research capabilities and recent technical advancements, solid-state NMR is still lacking behind other spectroscopic techniques in the field of thin films due to the underestimation of NMR capabilities, availability, great variety of nuclei and pulse sequences, lack of sensitivity for quadrupole nuclei and time-consuming experiments. This article will comprehensively and critically review the work done by solid-state NMR on different types of thin films and the most advanced NMR strategies, which are beyond conventional, and the hardware design used to overcome the technical issues in thin-film research.

High-resolution 13 C and 43 Ca solid-state NMR and computational studies of the ethylene glycol solvate of atorvastatin calcium

We report ⁴³ Ca and ¹³ C solid-state nuclear magnetic resonance (NMR) spectroscopic studies of the ethylene glycol solvate of atorvastatin calcium. The ¹³ C and ⁴³ Ca chemical shift and ⁴³ Ca quadrupolar coupling tensor parameters are reported. The results are interpreted in terms of the reported X-ray diffraction crystal structure of the solvate and are compared with the NMR parameters of atorvastatin calcium trihydrate, the active pharmaceutical ingredient in Lipitor®. Hartree-Fock and density functional theory calculations of the NMR parameters based on a cluster model derived from the optimized X-ray diffraction crystal structure of the ethylene glycol solvate of atorvastatin calcium are in reasonable agreement with the experimental ⁴³ Ca and ¹³ C NMR measurables.

A Supramolecular View on the Cooperative Role of Brønsted and Lewis Acid Sites in Zeolites for Methanol Conversion

A systematic molecular level and spectroscopic investigation is presented to show the cooperative role of Brønsted acid and Lewis acid sites in zeolites for the conversion of methanol. Extra-framework alkaline-earth metal containing species and aluminum species decrease the number of Brønsted acid sites, as protonated metal clusters are formed. A combined experimental and theoretical effort shows that postsynthetically modified ZSM-5 zeolites, by incorporation of extra-framework alkaline-earth metals or by demetalation with dealuminating agents, contain both mononuclear [MOH]⁺ and double protonated binuclear metal clusters [M(μ-OH)₂M]²⁺ (M = Mg, Ca, Sr, Ba, and HOAl). The metal in the extra-framework clusters has a Lewis acid character, which is confirmed experimentally and theoretically by IR spectra of adsorbed pyridine. The strength of the Lewis acid sites (Mg > Ca > Sr > Ba) was characterized by a blue shift of characteristic IR peaks, thus offering a tool to sample Lewis acidity experimentally. The incorporation of extra-framework Lewis acid sites has a substantial influence on the reactivity of propene and benzene methylations. Alkaline-earth Lewis acid sites yield increased benzene methylation barriers and destabilization of typical aromatic intermediates, whereas propene methylation routes are less affected. The effect on the catalytic function is especially induced by the double protonated binuclear species. Overall, the extra-framework metal clusters have a dual effect on the catalytic function. By reducing the number of Brønsted acid sites and suppressing typical catalytic reactions in which aromatics are involved, an optimal propene selectivity and increased lifetime for methanol conversion over zeolites is obtained. The combined experimental and theoretical approach gives a unique insight into the nature of the supramolecular zeolite catalyst for methanol conversion which can be meticulously tuned by subtle interplay of Brønsted and Lewis acid sites.

Exploiting in-situ solid-state NMR spectroscopy to probe the early stages of hydration of calcium aluminate cement

We report a high-field in-situ solid-state NMR study of the hydration of CaAl₂O₄ (the most important hydraulic phase in calcium aluminate cement), based on time-resolved measurements of solid-state ²⁷Al NMR spectra during the early stages of the reaction. A variant of the CLASSIC NMR methodology, involving alternate recording of direct-excitation and MQMAS ²⁷Al NMR spectra, was used to monitor the ²⁷Al species present in both the solid and liquid phases as a function of time. Our results provide quantitative information on the changes in the relative amounts of ²⁷Al sites with tetrahedral coordination (the anhydrous reactant phase) and octahedral coordination (the hydrated product phases) as a function of time, and reveal significantly different kinetic and mechanistic behaviour of the hydration reaction at the different temperatures (20 °C and 60 °C) studied.

Detection of the Surface of Crystalline Y2O3 Using Direct 89Y Dynamic Nuclear Polarization

Nuclei with low gyromagnetic ratio (γ) present a serious sensitivity challenge for nulear magnetic resonance (NMR) spectroscopy. Recently, dynamic nuclear polarization (DNP) has shown great promise in overcoming this hurdle by indirect hyperpolarization (via ¹H) of these low-γ nuclei. Here we show that at a magnetic field of 9.4 T and cryogenic temperature of about 110 K direct DNP of ⁸⁹Y in a frozen solution of Y(NO₃)₃ can offer signal enhancements greater than 80 times using exogeneous trityl OX063 monoradical by satisfying the cross effect magic angle spinning (MAS) DNP mechanism. The large signal enhancement achieved permits ⁸⁹Y NMR spectra of Y₂O₃ and Gd₂O₃-added Y₂O₃ materials to be obtained quickly (∼30 min), revealing a range of surface yttrium hydroxyl groups in addition to the two octahedral yttrium signals of the core. The results open up promises for the observation of low gyromagnetic ratio nuclei and the detection of corresponding surface and (sub-)surface sites.

A new NMR crystallographic approach to reveal the calcium local structure of atorvastatin calcium

We combine experimental and computational determination of ⁴³Ca solid-state NMR parameters (chemical shift tensors, quadrupolar coupling tensors, and Euler angles) to constrain the structure of the local calcium–ligand coordination environment.

Recent advances in solid-state nuclear magnetic resonance spectroscopy of exotic nuclei

We present a review of recent advances in solid-state nuclear magnetic resonance (SSNMR) studies of exotic nuclei. Exotic nuclei may be spin-1/2 or quadrupolar, and typically have low gyromagnetic ratios, low natural abundances, large quadrupole moments (when I > 1/2), or some combination of these properties, generally resulting in low receptivities and/or prohibitively broad line widths. Some nuclides are little studied for other reasons, also rendering them somewhat exotic. We first discuss some of the recent progress in pulse sequences and hardware development which continues to enable researchers to study new kinds of materials as well as previously unfeasible nuclei. This is followed by a survey of applications to a wide range of exotic nuclei (including e.g., ⁹Be, ²⁵Mg, ³³S, ³⁹K, ⁴³Ca, ^47/49Ti, ⁵³Cr, ⁵⁹Co, ⁶¹Ni, ⁶⁷Zn, ⁷³Ge, ⁷⁵As, ⁸⁷Sr, ¹¹⁵In, ¹¹⁹Sn, ^121/123Sb, ^135/137Ba, ^185/187Re, ²⁰⁹Bi), most of them quadrupolar. The scope of the review is the past ten years, i.e., 2007-2017.

Pushing the limits of sensitivity and resolution for natural abundance 43Ca NMR using ultra-high magnetic field (35.2 T)

Natural abundance 43Ca solid state NMR experiments are reported for the first time at ultra-high magnetic field (35.2 T) on a series of Ca-(pyro)phosphate and Ca-oxalate materials, which are of biological relevance in relation to biomineralization processes and the formation of pathological calcifications. The significant gain in both sensitivity and resolution at 35.2 T leads to unprecedented insight into the structure of both crystalline and amorphous phases.

Solid-state NMR and computational insights into the crystal structure of silicocarnotite-based bioceramic materials synthesized mechanochemically

In this work, we report the results of a detailed structural study of a promising bioceramic material silicocarnotite Ca₅(PO₄)₂SiO₄ (SC) synthesized from mechanochemically treated nanosized silicon-substituted hydroxyapatite by annealing at 1000°C. This novel synthetic approach represents an attractive and efficient route towards large-scale manufacturing of the silicocarnotite-based bioceramics. A combination of solid-state nuclear magnetic resonance (NMR), powder X-ray crystallography and density function theory (DFT) calculations has been implemented to characterize the phase composition of the prepared composite materials and to gain insight into the crystal structure of silicocarnotite. The phase composition analysis based on the multinuclear solid-state NMR has been found in agreement with X-ray powder diffraction indicating the minority phases of CaO (5-6wt%) and residual silicon-apatite (7-8wt%), while the rest of the material being a fairly crystalline silicocarnotite phase (86-88wt%). A combination of computational (CASTEP) and experimental methods was used to address the anionic site disorder in the silicocarnotite crystal structure. Distorted [OPO₃] pyramids have appeared as an important structural motif in the SC crystal structure. The ratio between regular [PO₄] and distorted [OPO₃] tetrahedra is found between 2:1 and 3:1 based on XRD experiments and CASTEP calculations. The natural abundance ⁴³Ca magic angle spinning NMR spectra of silicocarnotite are reported for the first time.

Interfacial Ca2+ environments in nanocrystalline apatites revealed by dynamic nuclear polarization enhanced 43Ca NMR spectroscopy

The interfaces within bones, teeth and other hybrid biomaterials are of paramount importance but remain particularly difficult to characterize at the molecular level because both sensitive and selective techniques are mandatory. Here, it is demonstrated that unprecedented insights into calcium environments, for example the differentiation of surface and core species of hydroxyapatite nanoparticles, can be obtained using solid-state NMR, when combined with dynamic nuclear polarization. Although calcium represents an ideal NMR target here (and de facto for a large variety of calcium-derived materials), its stable NMR-active isotope, calcium-43, is a highly unreceptive probe. Using the sensitivity gains from dynamic nuclear polarization, not only could calcium-43 NMR spectra be obtained easily, but natural isotopic abundance 2D correlation experiments could be recorded for calcium-43 in short experimental time. This opens perspectives for the detailed study of interfaces in nanostructured materials of the highest biological interest as well as calcium-based nanosystems in general.

Intraspecific Differences in Biogeochemical Responses to Thermal Change in the Coccolithophore Emiliania huxleyi

The species concept in marine phytoplankton is defined based on genomic, morphological, and functional properties. Reports of intraspecific diversity are widespread across major phytoplankton groups but the impacts of this variation on ecological and biogeochemical processes are often overlooked. Intraspecific diversity is well known within coccolithophores, which play an important role in the marine carbon cycle via production of particulate inorganic carbon. In this study, we investigated strain-specific responses to temperature in terms of morphology, carbon production, and carbonate mineralogy using a combination of microscopy, elemental analysis, flow cytometry, and nuclear magnetic resonance. Two strains of the cosmopolitan coccolithophore E. huxleyi isolated from different regions (subtropical, CCMP371; temperate, CCMP3266) were cultured under a range of temperature conditions (10°C, 15°C, and 20°C) using batch cultures and sampled during both exponential and stationary growth. Results for both strains showed that growth rates decreased at lower temperatures while coccosphere size increased. Between 15°C and 20°C, both strains produced similar amounts of total carbon, but differed in allocation of that carbon between particulate inorganic carbon (PIC) and particulate organic carbon (POC), though temperature effects were not detected. Between 10°C and 20°C, temperature effects on daily production of PIC and POC, as well as the cellular quota of POC were detected in CCMP3266. Strain-specific differences in coccolith shedding rates were found during exponential growth. In addition, daily shedding rates were negatively related to temperature in CCMP371 but not in CCMP3266. Despite differences in rates of particulate inorganic carbon production, both strains were found to produce coccoliths composed entirely of pure calcite, as established by solid-state ¹³C and ⁴³Ca NMR and X-ray diffraction measurements. These results highlight the limitations of the species concept and the need for a trait-based system to better quantify diversity within marine phytoplankton communities.

From crystalline to amorphous calcium pyrophosphates: A solid state Nuclear Magnetic Resonance perspective

Hydrated calcium pyrophosphates (CPP, Ca2P2O7·nH2O) are a fundamental family of materials among osteoarticular pathologic calcifications. In this contribution, a comprehensive multinuclear NMR (Nuclear Magnetic Resonance) study of four crystalline and two amorphous phases of this family is presented. (1)H, (31)P and (43)Ca MAS (Magic Angle Spinning) NMR spectra were recorded, leading to informative fingerprints characterizing each compound. In particular, different (1)H and (43)Ca solid state NMR signatures were observed for the amorphous phases, depending on the synthetic procedure used. The NMR parameters of the crystalline phases were determined using the GIPAW (Gauge Including Projected Augmented Wave) DFT approach, based on first-principles calculations. In some cases, relaxed structures were found to improve the agreement between experimental and calculated values, demonstrating the importance of proton positions and pyrophosphate local geometry in this particular NMR crystallography approach. Such calculations serve as a basis for the future ab initio modeling of the amorphous CPP phases.

STATEMENT OF SIGNIFICANCE

The general concept of NMR crystallography is applied to the detailed study of calcium pyrophosphates (CPP), whether hydrated or not, and whether crystalline or amorphous. CPP are a fundamental family of materials among osteoarticular pathologic calcifications. Their prevalence increases with age, impacting on 17.5% of the population after the age of 80. They are frequently involved or associated with acute articular arthritis such as pseudogout. Current treatments are mainly directed at relieving the symptoms of joint inflammation but not at inhibiting CPP formation nor at dissolving these crystals. The combination of advanced NMR techniques, modeling and DFT based calculation of NMR parameters allows new original insights in the detailed structural description of this important class of biomaterials.

High sensitivity and resolution in 43Ca solid-state NMR experiments

A thorough investigation of solid-state NMR signal enhancement schemes and high-resolution techniques for application to the spin-7/2 43Ca nuclide are presented. Signal enhancement experiments employing double frequency sweeps, hyperbolic secant pulses, and rotor-assisted population transfer, which manipulate the satellite transitions of half-integer quadrupolar nuclei to polarize the central transition (m = + 1/2 ↔ –1/2), are carried out on four well-characterized 43Ca isotopically enriched calcium salts: Ca(NO3)2, Ca(OD)2, CaSO4·2H2O, and Ca(OAc)2·H2O. These results, in conjunction with numerical simulations of 43Ca NMR spectra under magic-angle spinning conditions, are used to identify the technique that provides the most uniform (or quantitative) polarization enhancement as well as the largest signal enhancement factors independent of size of the 43Ca quadrupolar coupling constant, which is the most significant source of resonance broadening in 43Ca NMR spectra. These samples are further investigated using 43Ca double-rotation NMR spectroscopy to yield isotropic, or solution-like, NMR spectra with exquisite resolution. In addition, three unique calcium sites are resolved for the hemihydrated form of calcium acetate (unknown structure), Ca(OAc)2·0.5H2O, with double-rotation NMR, whereas the more common, but more time-consuming, multiple quantum magic-angle spinning technique only clearly resolves two calcium sites. The results shown herein will be useful for other NMR spectroscopists attempting to acquire 43Ca solid-state NMR data for unknown and more complex materials with a higher degree of both sensitivity and resolution.

Calcium environment in silicate and aluminosilicate glasses probed by ⁴³Ca MQMAS NMR experiments and MD-GIPAW calculations

⁴³Ca MQMAS NMR spectra of three silica-based glasses in which Ca²⁺ ions play different structural roles have been collected and processed in order to extract the underlying NMR parameter distributions. The NMR parameters have been interpreted with the help of molecular dynamics simulations and DFT-GIPAW calculations. This synergetic experimental-computational approach has allowed us to investigate the Ca environment, to estimate Ca coordination numbers from MD-derived models, and to push further the discussion about ⁴³Ca NMR sensitivity to the first and second coordination spheres: ⁴³Ca δiso and Ca-O distance can be successfully correlated as a function of Ca coordination number.

Solid-state (185/187)Re NMR and GIPAW DFT study of perrhenates and Re2(CO)10: chemical shift anisotropy, NMR crystallography, and a metal-metal bond

Advances in solid-state nuclear magnetic resonance (SSNMR) methods, such as dynamic nuclear polarization (DNP), intricate pulse sequences, and increased applied magnetic fields, allow for the study of systems which even very recently would be impractical. However, SSNMR methods using certain quadrupolar probe nuclei (i.e., I > 1/2), such as (185/187)Re remain far from fully developed due to the exceedingly strong interaction between the quadrupole moment of these nuclei and local electric field gradients (EFGs). We present a detailed high-field (B0 = 21.1 T) experimental SSNMR study on several perrhenates (KReO4, AgReO4, Ca(ReO4)2·2H2O), as well as ReO3 and Re2(CO)10. We propose solid ReO3 as a new rhenium SSNMR chemical shift standard due to its reproducible and sharp (185/187)Re NMR resonances. We show that for KReO4, previously poorly understood high-order quadrupole-induced effects (HOQIE) on the satellite transitions can be used to measure the EFG tensor asymmetry (i.e., ηQ) to nearly an order-of-magnitude greater precision than competing SSNMR and nuclear quadrupole resonance (NQR) approaches. Samples of AgReO4 and Ca(ReO4)2·2H2O enable us to comment on the effects of counter-ions and hydration upon Re(vii) chemical shifts. Calcium-43 and (185/187)Re NMR tensor parameters allow us to conclude that two proposed crystal structures for Ca(ReO4)2·2H2O, which would be considered as distinct, are in fact the same structure. Study of Re2(CO)10 provides insights into the effects of Re-Re bonding on the rhenium NMR tensor parameters and rhenium oxidation state on the Re chemical shift value. As overtone NQR experiments allowed us to precisely measure the (185/187)Re EFG tensor of Re2(CO)10, we were able to measure rhenium chemical shift anisotropy (CSA) for the first time in a powdered sample. Experimental observations are supported by gauge-including projector augmented-wave (GIPAW) density functional theory (DFT) calculations, with NMR tensor calculations also provided for NH4ReO4, NaReO4 and RbReO4. These calculations are able to reproduce many of the experimental trends in rhenium δiso values and EFG tensor magnitudes. Using KReO4 as a prototypical perrhenate-containing system, we establish a correlation between the tetrahedral shear strain parameter (|ψ|) and the nuclear electric quadrupolar coupling constant (CQ), which enables the refinement of the structure of ND4ReO4. Shortcomings in traditional DFT approaches, even when including relativistic effects via the zeroth-order regular approximation (ZORA), for calculating rhenium NMR tensor parameters are identified for Re2(CO)10.

On the crystal structure of the vaterite polymorph of CaCO3: a calcium-43 solid-state NMR and computational assessment

The vaterite polymorph of CaCO3 has puzzled crystallographers for decades in part due to difficulties in obtaining single crystals. The multiple proposed structures for the vaterite polymorph of CaCO3 are assessed using a combined (43)Ca solid-state nuclear magnetic resonance (SSNMR) spectroscopic and computational approach. A combination of improved experimental and computational methods, along with a calibrated chemical shift scale and (43)Ca nuclear quadrupole moment, allow for improved insights relative to our earlier work (Bryce et al., J. Am. Chem. Soc. 2008, 130, 9282). Here, we synthesize a (43)Ca isotopically-enriched sample of vaterite and perform high-resolution quadrupolar SSNMR experiments including magic-angle spinning (MAS), double-rotation (DOR), and multiple-quantum (MQ) MAS experiments at magnetic field strengths of 9.4 and 21.1T. We identify one crystallographically unique Ca(2+) site in vaterite with a slight distribution in both chemical shifts and quadrupolar parameters. Both the experimental (43)Ca electric field gradient tensor and the isotropic chemical shift for vaterite are compared to those calculated with the gauge-including projector-augmented-wave (GIPAW) DFT method in an attempt to identify the model that best represents the crystal structure of vaterite. Simulations of (43)Ca DOR and MAS NMR spectra based on the NMR parameters computed for a total of 18 structural models for vaterite allow us to distinguish between these models. Among these 18, the P3221 and C2 structures provide simulated spectra and diffractograms in best agreement with all experimental data.

Identifying Ca2+-binding sites in proteins by liquid chromatography-mass spectrometry using Ca2+-directed dissociations

Here we describe a new method to identify calcium-binding sites in proteins using high-resolution liquid chromatography-mass spectrometry in concert with calcium-directed collision-induced dissociations. Our method does not require any modifications to the liquid chromatography-mass spectrometry apparatus, uses standard digestion protocols, and can be applied to existing high-resolution MS data files. In contrast to NMR, our method is applicable to very small amounts of complex protein mixtures (femtomole level). Calcium-bound peptides can be identified using three criteria: (1) the calculated exact mass of the calcium containing peptide; (2) specific dissociations of the calcium-containing peptide from threonine and serine residues; and (3) the very similar retention times of the calcium-containing peptide and the free peptide.

Calcium-43 NMR studies of polymorphic transition of calcite to aragonite

Phase transformation between calcite and aragonite is an important issue in biomineralization. To shed more light on the mechanism of this process at the molecular level, we employ solid-state (43)Ca NMR to study the phase transformation from calcite to aragonite as regulated by magnesium ions, with (43)Ca enrichment at a level of 6%. Using the gas diffusion approach, the phase of Mg-calcite is formed initially and the system subsequently transforms to aragonite as the reaction time proceeds. Our (43)Ca solid-state NMR data support the dissolution-recrystallization mechanism for the calcite to aragonite transition. We find that the (43)Ca NMR parameters of Mg-calcite are very similar to those of pure calcite. Under the high-resolution condition provided by magic-angle spinning at 4 kHz, we can monitor the variation of the (43)Ca NMR parameters of the aragonite signals for the samples obtained at different reaction times. Our data suggest that in the presence of a significant amount of Mg(2+) ions, aragonite is the most stable polymorph of calcium carbonate. The initial precipitated crystallites of aragonite have spine-like morphology, for which the (43)Ca spin-lattice relaxation data indicate that the ions in the lattice have considerable motional dynamics. As the crystallinity of aragonite improves further, the (43)Ca T(1) parameter of the aragonite phase changes considerably and becomes very similar to that obtained for pure aragonite. For the first time, the difference in crystal morphologies and crystallinity of the aragonite phase has been traced down to the subtle difference in the motional dynamics at the molecular level.

QUEST-QUadrupolar Exact SofTware: a fast graphical program for the exact simulation of NMR and NQR spectra for quadrupolar nuclei

We present a new program for the exact simulation of solid-state NMR spectra of quadrupolar nuclei in stationary powdered samples which employs diagonalization of the combined Zeeman-quadrupolar Hamiltonian. The program, which we call QUEST (QUadrupolar Exact SofTware), can simulate NMR spectra over the full regime of Larmor and quadrupolar frequency ratios, which encompasses scenarios ranging from high-field NMR to nuclear quadrupole resonance (NQR, where the Larmor frequency is zero) and does not make use of approximations when treating the quadrupolar interaction. With the use of the fast powder averaging scheme of Alderman, Solum, and Grant, exact NMR spectral simulations are only marginally slower than the second-order perturbation theory counterpart. The program, which uses a graphical user interface, also incorporates chemical shift anisotropy and non-coincident chemical shift and quadrupolar tensor frames. The program is validated against newly-acquired experimental data through several examples including: the low-field (79/81)Br NMR spectra of CaBr(2), the (14)N overtone NMR spectrum of glycine, the (187)Re NQR spectra of Re(2)(CO)(10), and lastly the (127)I overtone NQR spectrum of SrI(2), which, to the best of our knowledge, represents the first direct acquisition of an overtone NQR spectrum for a powdered sample.

A 43Ca and 13C NMR study of the chemical interaction between poly(ethylene-vinyl acetate) and white cement during hydration

(43)Ca and (13)C NMR methods were used to study the chemical interaction of poly(ethylene-vinyl acetate) (PEVAc) admixture in commercial-grade white cement. From (43)Ca NMR it is shown both that PEVAc induces modest changes in the hydrated cement structure, and that hydrated commercial cement is significantly more complex than models that have been used for its structure in past work. The (13)C NMR results show that the PEVAc hydrolysis occurs early in the cement hydration acceleration period, with a rate well-fit by an exponential decay using a time constant of 6±1 days.

Characterization of noninnocent metal complexes using solid-state NMR spectroscopy: o-dioxolene vanadium complexes

(51)V solid-state NMR (SSNMR) studies of a series of noninnocent vanadium(V) catechol complexes have been conducted to evaluate the possibility that (51)V NMR observables, quadrupolar and chemical shift anisotropies, and electronic structures of such compounds can be used to characterize these compounds. The vanadium(V) catechol complexes described in these studies have relatively small quadrupolar coupling constants, which cover a surprisingly small range from 3.4 to 4.2 MHz. On the other hand, isotropic (51)V NMR chemical shifts cover a wide range from -200 to 400 ppm in solution and from -219 to 530 ppm in the solid state. A linear correlation of (51)V NMR isotropic solution and solid-state chemical shifts of complexes containing noninnocent ligands is observed. These experimental results provide the information needed for the application of (51)V SSNMR spectroscopy in characterizing the electronic properties of a wide variety of vanadium-containing systems and, in particular, those containing noninnocent ligands and that have chemical shifts outside the populated range of -300 to -700 ppm. The studies presented in this report demonstrate that the small quadrupolar couplings covering a narrow range of values reflect the symmetric electronic charge distribution, which is also similar across these complexes. These quadrupolar interaction parameters alone are not sufficient to capture the rich electronic structure of these complexes. In contrast, the chemical shift anisotropy tensor elements accessible from (51)V SSNMR experiments are a highly sensitive probe of subtle differences in electronic distribution and orbital occupancy in these compounds. Quantum chemical (density functional theory) calculations of NMR parameters for [VO(hshed)(Cat)] yield a (51)V chemical shift anisotropy tensor in reasonable agreement with the experimental results, but surprisingly the calculated quadrupolar coupling constant is significantly greater than the experimental value. The studies demonstrate that substitution of the catechol ligand with electron-donating groups results in an increase in the HOMO-LUMO gap and can be directly followed by an upfield shift for the vanadium catechol complex. In contrast, substitution of the catechol ligand with electron-withdrawing groups results in a decrease in the HOMO-LUMO gap and can directly be followed by a downfield shift for the complex. The vanadium catechol complexes were used in this work because (51)V is a half-integer quadrupolar nucleus whose NMR observables are highly sensitive to the local environment. However, the results are general and could be extended to other redox-active complexes that exhibit coordination chemistry similar to that of the vanadium catechol complexes.

A multinuclear solid-state magnetic resonance and GIPAW DFT study of anhydrous calcium chloride and its hydrates

The group 2 metal halides and corresponding metal halide hydrates serve as useful model systems for understanding the relationship between the electric field gradient (EFG) and chemical shift (CS) tensors at the halogen nuclei and the local molecular and electronic structure. Here, we present a 35/37Cl and 43Ca solid-state nuclear magnetic resonance (SSNMR) study of CaCl2. The 35Cl nuclear quadrupole coupling constant, 8.82(8) MHz, and the isotropic chlorine CS, 105(8) ppm (with respect to dilute NaCl(aq)), are different from the values reported previously for this compound, as well as those reported for CaCl2·2H2O. Chlorine-35 SSNMR spectra are also presented for CaCl2·6H2O, and when taken in concert, the SSNMR observations for CaCl2, CaCl2·2H2O, and CaCl2·6H2O clearly demonstrate the sensitivity of the chlorine EFG and CS tensors to the local symmetry and to changes in the hydration state. For example, the value of δiso decreases with increasing hydration. Gauge-including projector-augmented wave (GIPAW) density functional theory (DFT) calculations are used to substantiate the experimental SSNMR findings, to rule out the presence of other hydrates in our samples, to refine the hydrogen positions in CaCl2·2H2O, and to explore the isostructural relationship between CaCl2 and CaBr2. Finally, the 43Ca CS tensor span is measured to be 31(5) ppm for anhydrous CaCl2, which represents only the fifth CS tensor span measurement for calcium.