Lewis Acid Stabilized Diatomic Molecules of Group 14: A Computational Study on [(CO)4Fe]2E2 (E = C, Si, Ge, Sn, Pb)

A Lewis base and acid combination has been effectively employed to stabilize and isolate the low-valent group 14 compounds. We report DFT studies on stabilizing low-valent group 14 diatomics as adducts of Lewis acids employing transition metal carbonyl fragment iron tetracarbonyl [Fe(CO)4] as Lewis acid. Computational studies on [(CO)4Fe]2E2, E = C, Si, Ge, Sn, and Pb, predict five plausible isomers on its potential energy surface: linear (E2_L), bent (E2_B), three-membered (E2_T), dibridged (E2_D), and four-membered (E2_F). For the carbon analogue, the lowest energy configuration is linear and has a typical cumulenic structure, while silicon and germanium analogues favor three-membered cyclic isomers. Four-membered cyclic isomers are the most stable for tin and lead analogues.

A Neutral Borylene and its Conversion to a Radical by Selective Hydrogen Transfer

A successful selective reduction of X₂B-Tip (Tip = 1,3,5-ⁱPr₃-C₆H₂, X = I, Br) with KC₈ and Mg metal, respectively, in the presence of a hybrid ligand (C₆H₄(PPh₂)LSi) leads to a stable low-valent five-membered ring as a boryl radical [C₆H₄(PPh₂)LSiBTip][Br] (1) and neutral borylene [C₆H₄(PPh₂)LSiBTip] (2). Compound 2 reacts with 1,4-cyclohexadiene, resulting in hydrogen abstraction to afford the radical [C₆H₄(PPh₂)LSiB(H)Tip] (3). Quantum chemical studies reveal that compound 1 is a B-centered radical, and compound 2 is a phosphane and silylene stabilized neutral borylene in a trigonal planar environment, whereas compound 3 is an amidinate-centered radical. Although compounds 1 and 2 are stabilized by hyperconjugation and π-conjugation, they display high H-abstraction energy and basicity, respectively.

Coordination and Stabilization of a Lithium Ion with a Silylene

Herein, we report the stabilization of lithium-ion as the source of lithium to use as a trans-metalation reagent [{PhC(N^t Bu)₂ Si(^t Bu)Li}₂ I(^t BuN)₂ CPh] (1). The reaction of 3 equivalents of the LSi^t Bu (L=PhC(N^t Bu)₂ ) and lithium iodide at low temperature leads to a silylene stabilized lithium-ion with an additional coordination of amidinate ligand. Compound 1 shows two four membered and one six membered ring as confirmed by QTAIM calculations. Whereas the reaction of the LSiCl with 1.5 equivalents of carbodiimide (CyN)₂ C at room temperature affords compound [PhC(N^t Bu)₂ Si(Cl)(NCy)₂ NCy] (2) with the CN₂ SiN₂ C skeleton containing silicon as a central atom. Both the compounds were fully characterized by NMR, mass spectrometry, X-ray crystallographic analysis, and quantum mechanical calculations.

A Hydride-Substituted Homoleptic Silylborate: How Similar is it to its Diborane(6)-Dianion Isostere?

The B-nucleophilic 9H-9-borafluorene dianion reacts with 9-chloro-9-silafluorene to afford air- and moisture-stable silylborate salts M[Ar₂ (H)B-Si(H)Ar₂ ] (M[HBSiH], M=Li, Na). Li[HBSiH] and Me₃ SiCl give the B-pyridine adduct Ar₂ (py)B-Si(H)Ar₂ ((py)BSiH) or the chlorosilane Li[Ar₂ (H)B-Si(Cl)Ar₂ ] (Li[HBSiCl]) in C₆ H₆ -pyridine or THF. In both cases, the first step is H^- abstraction at the B center. The resulting free borane subsequently binds a py or thf ligand. While the py adduct is stable at room temperature, the thf adduct undergoes a 1,2-H shift via the cyclic B(μ-H)Si intermediate BHSi, which is afterwards attacked at the Si atom by a Cl^- ion to give Li[HBSiCl]. DFT calculations were employed to support the proposed reaction mechanism and to characterize the electronic structure of BHSi. Treatment of Li[HBSiCl] with the N-heterocyclic carbene IMe introduces the neutral donor at the Si atom and leads to Ar₂ (H)B-Si(IMe)Ar₂ (HBSi(IMe)), a donor-acceptor-stabilized silylene.

Neutral Homoaromatic Diboradisilacyclobutene: Synthesis, Structure, and Reactivity

A formally neutral homoaromatic diboradisilacyclobutene was prepared and structurally characterized via the reduction of borylaminobromosilane with potassium graphite, which represents the first neutral boron and silicon mixed analogue of the homocyclopropenylium ion. Single-crystal X-ray analyses revealed a folded four-membered B₂Si₂ ring (26.2°) and a remarkably short transannular B-Si distance of 2.306(3) Å. DFT calculations showed that two π-electrons delocalize over the BSi₂ moiety. Both structural feature and DFT calculations show the significant 2π-homoaromatic nature of the diboradisilacyclobutene. Furthermore, diboradisilacyclobutene reacted readily with CuCl or HCl to afford the diboradisilacyclobutanes.

Isolation of Silacycles from the Reactions of a Monochlorosilylene LSi(:)Cl (L = PhC(NtBu)2) with Ethynyl Lithium Salts

The reactions of amidinate silylene chloride LSi(:)Cl (L = PhC(NtBu)₂) with TMS- and Ph-ethynyl lithium salts gave rise to silacycles 1 and 4, respectively. The formation of 1 and 4 may undergo cyclo-condensations of transient ethynylsilylene intermidiates and the activation of an amidinate backbone. The distinct structures of 1 and 4 may be derived from the different electronic or steric properties of ethynyl substituents, and their formation mechanisms were investigated by density functional theory (DFT) calculations. Moreover, a sequential reaction of LSi(:)Cl with BH₃·SMe₂ and TMSC≡CLi as well as a reaction of LSi(:)Cl with TMSC≡CLi under O₂ exclusively obtained ethynylsilanes 2 and 3, respectively, which indicated that either blocking a lone pair of a Si(II) atom or oxidizing Si(II) to Si(IV) prevents the further conversion of ethynylsilylenes to silacycle 1. All products were characterized by NMR spectroscopy and X-ray crystallography.

An NHC-Stabilized H2 GeBH2 Precursor for the Preparation of Cationic Group 13/14/15 Hydride Chains

The synthesis, characterization and reactivity studies of the NHC-stabilized complex IDipp ⋅ GeH2 BH2 OTf (1) (IDipp=1,3-bis(2,6-diisopropylphenyl)imidazolin-2-ylidene) are reported. Nucleophilic substitution of the triflate (OTf) group in 1 by phosphine or arsine donors provides access to the cationic group 13/14/15 chains [IDipp ⋅ GeH2 BH2 ERR1 R2 ]+ (2 E=P; R, R1 =H; R2 =t Bu; 3 E=P; R=H; R1 , R2 =Ph; 4 a E=P; R, R1 , R2 =Ph; 4 b E=As; R, R1 , R2 =Ph). These novel cationic chains were characterized by X-ray crystallography, NMR spectroscopy and mass spectrometry. Moreover, the formation of the parent complexes [IDipp ⋅ GeH2 BH2 PH3 ][OTf] (5) and [IDipp ⋅ GeH3 ][OTf] (6) were achieved by reaction of 1 with PH3 . Accompanying DFT computations give insight into the stability of the formed chains with respect to their decomposition.

High yield of a variety of silicon-boron radicals and their reactivity

Herein we report stable silicon-boron radicals of composition LSi(NMe2)-B(Br)Tip (1), LSi(NMe2)-B(I)Tip (2) LSi(tBu)-B(I)Tip (3) [L=PhC(NtBu)2]. They were prepared in high yield using a one-pot reaction of LSiR, X2BTip, and KC8...

Amidinatoamidosilylene-Dibromodiborene

The amidinatoamidosilylene [LSiNMe₂] [1; L = PhC(NtBu)₂] was reacted with B₂Br₄(SMe₂)₂ in toluene at room temperature to form the bis(silylene)tetrabromodiborane [L{Me₂N}Si]₂B₂Br₄ (2). It was then reacted with excess KC₈ in tetrahydrofuran at room temperature to afford the bis(silylene)dibromodiborene [L{Me₂N}Si]₂B₂Br₂ (3).

Molecular Main Group Metal Hydrides

This review serves to document advances in the synthesis, versatile bonding, and reactivity of molecular main group metal hydrides within Groups 1, 2, and 12-16. Particular attention will be given to the emerging use of said hydrides in the rapidly expanding field of Main Group element-mediated catalysis. While this review is comprehensive in nature, focus will be given to research appearing in the open literature since 2001.

A square planar silylene nickel four-membered ring

Herein the new nickel silylene [PhC(NtBu)₂SiNi(C₅Me₅)]₂, which features a square planar central ring motif consisting of two silicon and two nickel atoms is presented. The title compound was obtained by an insertion of the Ni(0) precursor [Ni(cod)₂] (cod = 1,5-cyclooctadiene) in the Si-C bond of the silylene [PhC(NtBu)₂Si(C₅Me₅)]. Analytic characterisation including mass spectrometry as well as IR and Raman spectroscopies was combined with quantum chemical calculations to get an insight on the bonding situation within the four-membered Si-Ni-ring.

A cyclopentadienyl functionalized silylene - a flexible ligand for Si- and C-coordination

The synthesis of a 1,2,3,4-tetramethylcyclopentadienyl (Cp⁴) substituted four-membered N-heterocyclic silylene [{PhC(NtBu)₂}Si(C₅Me₄H)] is reported first. Then, selected reactions with transition metal and a calcium precursor are shown. The proton of the Cp⁴-unit is labile. This results in two different reaction pathways: (1) deprotonation and (2) rearrangement reactions. Deprotonation was achieved by the reaction of [{PhC(NtBu)₂}Si(C₅Me₄H)] with suitable zinc precursors. Rearrangement to [{PhC(NtBu)₂}(C₅Me₄)SiH], featuring a formally tetravalent silicon R₂C[double bond, length as m-dash]Si(R')-H unit, was observed when the proton of the Cp⁴ ring was shifted from the Cp⁴-ring to the silylene in the presence of a Lewis acid. This allows for the coordination of the Cp⁴-ring to a calcium compound. Furthermore, upon reaction with transition metal dimers [MCl(cod)]₂ (M = Rh, Ir; cod = 1,5-cyclooctadiene) the proton stays at the Cp⁴-ring and the silylene reacts as a sigma donor, which breaks the dimeric structure of the precursors.

Organogermanium(II) Hydrides as a Source of Highly Soluble LiH

The reactions of monomeric C,N-chelated organogermanium(II) hydride L(H)Ge⋅BH₃ with organolithium salts RLi yielded lithium hydrogermanatoborates (Li(THF)₂ {BH₃ [L(H)GeR]})₂ . Compound (Li(THF)₂ {BH₃ [L(H)GePh]})₂ was used as a source of LiH for the reduction of organic C=O or C=N bonds in nonpolar solvents accompanied by the elimination of a neutral complex L(Ph)Ge⋅BH₃ . The interaction of (Li(THF)₂ {BH₃ [L(H)GePh]})₂ with the polar C=O bond was further investigated by computational studies revealing a plausible geometry of a pre-reactive intermediate. The experimental and theoretical studies suggest that, although the Li atom of (Li(THF)₂ {BH₃ [L(H)GePh]})₂ coordinates the C=O bond, the GeH fragment is the active species in the reduction reaction. Finally, benzaldehyde was reduced by a mixture of L(H)Ge⋅BH₃ with PhLi in nonpolar solvents.

NHC-Stabilized Silyl-Substituted Chlorosilylene

The first N-heterocyclic carbene (NHC) stabilized silyl-substituted chlorosilylene (1) was isolated via selective dehydrochlorination by NHC from silyl-based Si(IV) precursor tBu₃SiSiHCl₂. Compound 1 can form an iron chlorosilylene complex (2) with an iron carbonyl dimer and undergoes chloride/hydride metathesis to yield a stable NHC-silylene hydride borane adduct (3). Upon treatment with additional NHC, chlorosilylene 1 was converted into silyl-substituted silyliumylidene ions (4).

Reactivity of an NHC-stabilized pyramidal hydrosilylene with electrophilic boron sources

An NHC-stabilized three-coordinate hydrosilylene dehydrogenates ammonia borane and forms more stable complexes with BH₃, BPh₃, BBr₃ and BPhBr₂ but less stable ones with BF₃, and BCl₃ for which ligand scrambling occurs.

Low-valent group 14 element hydride chemistry: towards catalysis

The chemistry of group 14 element(ii) hydride complexes has rapidly expanded since the first stable example of such a compound was reported in 2000. Since that time it has become apparent that these systems display remarkable reactivity patterns, in some cases mimicking those of late transition-metal (TM) hydride compounds. This is especially so for the hydroelementation of unsaturated organic substrates. Recently, this aspect of their reactivity has been extended to the use of group 14 element(ii) hydrides as efficient, "TM-like" catalysts in organic synthesis. This review will detail how the chemistry of these hydride compounds has advanced since their early development. Throughout, there is a focus on the importance of ligand effects in these systems, and how ligand design can greatly modify a coordinated complex's electronic structure, reactivity, and catalytic efficiency.

Synthesis, Structure and Reactivity of a Borylene Cation [(NHSi)2B(CO)]+ Stabilized by Three Neutral Ligands

A borylene cation stabilized by bis(silylene) and carbon monoxide was prepared and structurally characterized via the reaction of bis(silylene)-stabilized bromoborylene with W(CO)₆. This is the first example of a borylene cation coordinated by three neutral ligands, which can be viewed as a cationic form of a long-sought Lewis base-stabilized zerovalent boron compound. This cation can cleave dihydrogen.

Bis(amidinato)- and bis(guanidinato)silylenes and silylenes with one sterically demanding amidinato or guanidinato ligand: synthesis and reactivity

Silylenes 1–4 have great synthetic potential for the synthesis of higher coordinate silicon(ii) and silicon(iv) complexes with unprecedented structural motifs.

Reactivity studies of silylene [PhC(NtBu)2](C5Me5)Si – reactions with [M(COD)Cl]2(M = Rh(i), Ir(i)), S, Se, Te, and BH3

The reactivity of N-heterocyclic silylene [PhC(NtBu)₂](C₅Me₅)Si towards main group elements and transition metals was evaluated.

The Structure of the Carbene Stabilized Si2H2 May Be Equally Well Described with Coordinate Bonds as with Classical Double Bonds

The cyclic alkyl(amino) carbene stabilized Si2H2 has been isolated in the molecular form of composition (Me-cAAC:)2Si2H2 (1) and (Cy-cAAC:)2Si2H2 (2) at room temperature. Compounds 1 and 2 were synthesized from the reduction of HSiCl3 using 3 equiv of KC8 in the presence of 1 equiv of Me-cAAC: and Cy-cAAC:, respectively. These are the first molecular examples of Si2H2 characterized by single crystal X-ray structural analysis. Moreover, electrospray ionization mass spectrometry and (1)H as well as (29)Si NMR data are reported. Furthermore, the structure of compound 1 has been investigated by theoretical methods. The theoretical analysis of 1 explains equally well its structure with coordinate bonds as with classical double bonds of a 2,3-disila-1,3-butadiene.

The Si2H radical supported by two N-heterocyclic carbenes

Cyclic voltammetric studies of the hydridodisilicon(0,II) borate [(Idipp)(H)SiII[double bond, length as m-dash]Si0(Idipp)][B(ArF)4] (1H[B(ArF)4], Idipp = C[N(C6H3-2,6-iPr2)CH]2, ArF = C6H3-3,5-(CF3)2) reveal a reversible one-electron reduction at a low redox potential (E 1/2 = -2.15 V vs. Fc+/Fc). Chemical reduction of 1H[B(ArF)4] with KC8 affords selectively the green, room-temperature stable mixed-valent disilicon(0,I) hydride Si2(H)(Idipp)2 (1H), in which the highly reactive Si2H molecule is trapped between two N-heterocyclic carbenes (NHCs). The molecular and electronic structure of 1H was investigated by a combination of experimental and theoretical methods and reveals the presence of a π-type radical featuring a terminal bonded H atom at a flattened trigonal pyramidal coordinated Si center, that is connected via a Si-Si bond to a bent two-coordinated Si center carrying a lone pair of electrons. The unpaired electron occupies the Si[double bond, length as m-dash]Si π* orbital leading to a formal Si-Si bond order of 1.5. Extensive delocalization of the spin density occurs via conjugation with the coplanar arranged NHC rings with the higher spin density lying on the site of the two-coordinated silicon atom.

Group 14 inorganic hydrocarbon analogues

This Review article deals with the synthesis and properties of inorganic hydrocarbon analogues: binary chemical species that contain heavier Group 14 elements (Si, Ge, Sn or Pb) and hydrogen as components. Rapid advances in our general knowledge of these species have enabled the development of industrially relevant processes such as the hydrosilylation of unsaturated substrates and the chemical vapor deposition of semi-conducting films.

Five-coordinate silicon(II) compounds with Si-M bonds (M = Cr, Mo, W, Fe): Bis[N,N'-diisopropylbenzamidinato(-)]silicon(II) as a ligand in transition-metal complexes

Reaction of the donor-stabilized silylene 1 with [Cr(CO)6], [Mo(CO)6], [W(CO)6], or [Fe(CO)5] leads to the formation of the transition-metal silylene complexes 2-5, which contain five-coordinate silicon(II) moieties with Si-M bonds (M = Cr, Mo, W, Fe). These compounds were characterized by NMR spectroscopic studies in the solid state and in solution and by crystal structure analyses. These experimental investigations were complemented by computational studies to gain insight into the bonding situation of 2-5. The nature of the Si-M bonds is best described as a single bond.