Application of apatite particles for remediation of contaminated soil and groundwater: A review and perspectives

With rapid industrial development and population growth, the pollution of soil and groundwater has become a critical concern all over the world. Yet, remediation of contaminated soil and water remains a major challenge. In recent years, apatite has gained a surging interest in environmental remediation because of its high treatment efficiency, low cost, and environmental benignity. This review summarizes recent advances in: (1) natural apatite of phosphate ores and biological source; (2) synthesis of engineered apatite particles (including stabilized or surface-modified apatite nanoparticles); (3) treatment effectiveness of apatite towards various environmental pollutants in soil and groundwater, including heavy metals (e.g., Pb, Zn, Cu, Cd, and Ni), inorganic anions (e.g., As oxyanions and F-), radionuclides (e.g., thorium (Th), strontium (Sr), and uranium (U)), and organic pollutants (e.g., antibiotics, dyes, and pesticides); and (4) the removal and/or interaction mechanisms of apatite towards the different contaminants. Lastly, the knowledge or technology gaps are identified and future research needs are proposed.

Design of 3D Scaffolds for Hard Tissue Engineering: From Apatites to Silicon Mesoporous Materials

Advanced bioceramics for bone regeneration constitutes one of the pivotal interests in the multidisciplinary and far-sighted scientific trajectory of Prof. Vallet Regí. The different pathologies that affect osseous tissue substitution are considered to be one of the most important challenges from the health, social and economic point of view. 3D scaffolds based on bioceramics that mimic the composition, environment, microstructure and pore architecture of hard tissues is a consolidated response to such concerns. This review describes not only the different types of materials utilized: from apatite-type to silicon mesoporous materials, but also the fabrication techniques employed to design and adequate microstructure, a hierarchical porosity (from nano to macro scale), a cell-friendly surface; the inclusion of different type of biomolecules, drugs or cells within these scaffolds and the influence on their successful performance is thoughtfully reviewed.

Template-assisted, Sol-gel Fabrication of Biocompatible, Hierarchically Porous Hydroxyapatite Scaffolds

Hierarchically porous hydroxyapatite (HHA) scaffolds were synthesized by template-assisted sol-gel chemistry. Polyurethane foam and a block copolymer were used as templates for inducing hierarchically porous structures. The HHA scaffolds exhibited open porous structures with large pores of 400-600 µm and nanoscale pores of ~75 nm. In comparison with conventional hydroxyapatite (CHA), HHA scaffolds exhibited significantly higher surface areas and increased protein adsorption for bovine serum albumin and vitronectin. Both the HHA and CHA scaffolds exhibited well in vitro biocompatibility. After 1 day, Saos-2 osteoblast-like cells bound equally well to both HHA and CHA scaffolds, but after 7 days in culture, cell proliferation was significantly greater on the HHA scaffolds (p < 0.01). High surface area and hierarchical porous structure contributed to the selective enhancement of osteoblast proliferation on the HHA scaffolds.

Calcium orthophosphates (CaPO4): Occurrence and properties

The present overview is intended to point the readers' attention to the important subject of calcium orthophosphates (CaPO₄). This type of materials is of the special significance for the human beings because they represent the inorganic part of major normal (bones, teeth and antlers) and pathological (those appearing due to various diseases) calcified tissues of mammals. For example, atherosclerosis results in blood vessel blockage caused by a solid composite of cholesterol with CaPO₄, while dental caries (tooth decay) and osteoporosis (a low bone mass with microarchitectural changes) mean a partial decalcification of teeth and bones, respectively, that results in replacement of a less soluble and harder biological apatite by more soluble and softer calcium hydrogenorthophosphates. Due to the compositional similarities to the calcified tissues of mammals, CaPO₄ are widely used as biomaterials for bone grafting purposes. In addition, CaPO₄ have many other applications. Thus, there is a great significance of CaPO₄ for the humankind and, in this paper, an overview on the current knowledge on this subject is provided.

3D scaffold with effective multidrug sequential release against bacteria biofilm

Bone infection is a feared complication following surgery or trauma that remains as an extremely difficult disease to deal with. So far, the outcome of therapy could be improved with the design of 3D implants, which combine the merits of osseous regeneration and local multidrug therapy so as to avoid bacterial growth, drug resistance and the feared side effects. Herein, hierarchical 3D multidrug scaffolds based on nanocomposite bioceramic and polyvinyl alcohol (PVA) prepared by rapid prototyping with an external coating of gelatin-glutaraldehyde (Gel-Glu) have been fabricated. These 3D scaffolds contain three antimicrobial agents (rifampin, levofloxacin and vancomycin), which have been localized in different compartments of the scaffold to obtain different release kinetics and more effective combined therapy. Levofloxacin was loaded into the mesopores of nanocomposite bioceramic part, vancomycin was localized into PVA biopolymer part and rifampin was loaded in the external coating of Gel-Glu. The obtained results show an early and fast release of rifampin followed by sustained and prolonged release of vancomycin and levofloxacin, respectively, which are mainly governed by the progressive in vitro degradability rate of these scaffolds. This combined therapy is able to destroy Gram-positive and Gram-negative bacteria biofilms as well as inhibit the bacteria growth. In addition, these multifunctional scaffolds exhibit excellent bioactivity as well as good biocompatibility with complete cell colonization of preosteoblast in the entire surface, ensuring good bone regeneration. These findings suggest that these hierarchical 3D multidrug scaffolds are promising candidates as platforms for local bone infection therapy.

STATEMENT OF SIGNIFICANCE

The present study is focused in finding an adequate therapeutic solution for the treatment of bone infection based on 3D multifunctional scaffolds, which combines the merits of osseous regeneration and local multidrug delivery. These 3D multidrug scaffolds, containing rifampin, levofloxacin and vancomycin, localized in different compartments to achieve different release kinetics. These 3D multidrug scaffolds displays an early and fast release of rifampin followed by sustained and prolonged release of vancomycin and levofloxacin, which are able to destroy Staphylococcus and Escherichia biofilms as well as inhibit bacteria growth in very short time periods. This new combined therapy approach involving the sequential delivery of antibiofilms with antibiotics constitutes an excellent and promising alternative for bone infection treatment.

Calcium orthophosphates (CaPO4): occurrence and properties

The present overview is intended to point the readers' attention to the important subject of calcium orthophosphates (CaPO4). This type of materials is of the special significance for the human beings because they represent the inorganic part of major normal (bones, teeth and antlers) and pathological (i.e., those appearing due to various diseases) calcified tissues of mammals. For example, atherosclerosis results in blood vessel blockage caused by a solid composite of cholesterol with CaPO4, while dental caries and osteoporosis mean a partial decalcification of teeth and bones, respectively, that results in replacement of a less soluble and harder biological apatite by more soluble and softer calcium hydrogenorthophosphates. Therefore, the processes of both normal and pathological calcifications are just an in vivo crystallization of CaPO4. Similarly, dental caries and osteoporosis might be considered as in vivo dissolution of CaPO4. In addition, natural CaPO4 are the major source of phosphorus, which is used to produce agricultural fertilizers, detergents and various phosphorus-containing chemicals. Thus, there is a great significance of CaPO4 for the humankind and, in this paper, an overview on the current knowledge on this subject is provided.

Toughening and functionalization of bioactive ceramic and glass bone scaffolds by biopolymer coatings and infiltration: a review of the last 5 years

Inorganic scaffolds with high interconnected porosity based on bioactive glasses and ceramics are prime candidates for applications in bone tissue engineering. These materials however exhibit relatively low fracture strength and high brittleness. A simple and effective approach to improve the toughness is to combine the basic scaffold structure with polymer coatings or through the formation of interpenetrating polymer-bioactive ceramic microstructures. The polymeric phase can additionally serve as a carrier for growth factors and therapeutic drugs, thus adding biological functionalities. The present paper reviews the state-of-the art in the field of polymer coated and infiltrated bioactive inorganic scaffolds. Based on the notable combination of bioactivity, improved mechanical properties and drug or growth factor delivery capability, this scaffold type is a candidate for bone and osteochondral regeneration strategies. Remaining challenges for the improvement of the materials are discussed and opportunities to broaden the application potential of this scaffold type are also highlighted.

Parathyroid hormone-related protein (107-111) improves the bone regeneration potential of gelatin-glutaraldehyde biopolymer-coated hydroxyapatite

Biopolymer-coated nanocrystalline hydroxyapatite (HA) made as macroporous foams which are degradable and flexible are promising candidates as orthopaedic implants. The C-terminal (107-111) epitope of parathyroid hormone-related protein (PTHrP) exhibits osteogenic properties. The main aim of this study was to evaluate whether PTHrP (107-111) loading into gelatin-glutaraldehyde biopolymer-coated HA (HAGlu) scaffolds would produce an optimal biomaterial for tissue engineering applications. HAGlu scaffolds with and without PTHrP (107-111) were implanted into a cavitary defect performed in both distal tibial metaphysis of adult rats. Animals were sacrificed after 4 weeks for histological, microcomputerized tomography and gene expression analysis of the callus. At this time, bone healing occurred only in the presence of PTHrP (107-111)-containing HAGlu implant, related to an increase in bone volume/tissue volume and trabecular thickness, cortical thickness and gene expression of osteocalcin and vascular cell adhesion molecule 1, but a decreased gene expression of Wnt inhibitors, SOST and dickkopf homolog 1. The autonomous osteogenic effect of the PTHrP (107-111)-loaded HAGlu scaffolds was confirmed in mouse and human osteoblastic cell cultures. Our findings demonstrate the advantage of loading PTHrP (107-111) into degradable HAGlu scaffolds for achieving an optimal biomaterial that is promising for low load bearing clinical applications.

In vivo osteointegration of three-dimensional crosslinked gelatin-coated hydroxyapatite foams

The main requirement of bone regenerative scaffolds is to enhance the chemical reactions leading to the formation of new bone while providing a proper surface for tissue in-growth as well as a suitable degradation rate. Calcium phosphate ceramics are conformed by different shaping methods. One requirement is to design implants and scaffolds with suitable shapes and sizes, but also with interconnected porosity to ensure bone oxygenation and angiogenesis. In this work we present the in vivo performance of hierarchically arranged glutaraldehyde crosslinked, gelatin-coated nanocrystalline hydroxyapatite (HABP) scaffolds (1-400 μm), with high potential as bone regenerators and excellent osteointegration performance, as well as an appropriate bioresorption rate. 6×10 mm bone defects were made in the lateral aspect of both distal femoral epiphysis of 15 mature (9 months old) male New Zealand rabbits. The bone defect in the left femur was then filled by using HABP foam cylinders, allowing the surgeon to carve the appropriate shape for a particular bone defect with high stability intra-operatively. The foam becomes swollen with body fluid and fills the cavity, ensuring good fixation without the need for a cement. Histological and radiographical studies after 4 months implantation showed healing of all treated bone defects, with bone integration of the HABP foam cylinders and bone conduction over the surface. This in vivo behaviour offers promising results as a scaffold for clinical applications, mainly in orthopaedics and dentistry.

Biological performance of hydroxyapatite-biopolymer foams: in vitro cell response

Uncoated and biopolymer-coated nanocrystalline hydroxyapatite (HA) macroporous foams are presented as promising candidates as scaffolds for bone tissue regeneration. To this end, foam degradability, the cytotoxic effects on osteoblast-like cells of foam degradation by-products and biocompatibility with osteoblast-like cells were assayed on the three-dimensional (3-D) foam surface. The results show that the 3-D interconnected architectural design of these HA foams allows excellent osteoblast internalization, proliferation and differentiation, exhibiting adequate colonization over the entire scaffold surface with an appropriate degradation rate without any cytotoxic effects.

Bioceramics: from bone regeneration to cancer nanomedicine

Research on biomaterials has been growing in the last few years due to the clinical needs in organs and tissues replacement and regeneration. In addition, cancer nanomedicine has recently appeared as an effective means to combine nanotechnology developments towards a clinical application. Ceramic materials are suitable candidates to be used in the manufacturing of bone-like scaffolds. Bioceramic materials may also be designed to deliver biologically active substances aimed at repairing, maintaining, restoring or improving the function of organs and tissues in the organism. Several materials such as calcium phosphates, glasses and glass ceramics able to load and subsequently release in a controlled fashion drugs, hormones, growth factors, peptides or nucleic acids have been developed. In particular, to prevent post surgical infections bioceramics may be surface modified and loaded with certain antibiotics, thus preventing the formation of bacterial biofilms. Remarkably, mesoporous bioactive glasses have shown excellent characteristics as drug carrying bone regeneration materials. These bioceramics are not only osteoconductive and osteoproductive, but also osteoinductive, and have therefore been proposed as ideal components for the fabrication of scaffolds for bone tissue engineering. A recent promising development of bioceramic materials is related to the design of magnetic mediators against tumors. Magnetic composites are suitable thermoseeds for cancer treatment by hyperthermia. Moreover, magnetic nanomaterials offer a wide range of possibilities for diagnosis and therapy. These nanoparticles may be conjugated with therapeutic agents and heat the surrounding tissue under the action of alternating magnetic fields, enabling hyperthermia of cancer as an effective adjunct to chemotherapy regimens.

Calcium orthophosphates: occurrence, properties, biomineralization, pathological calcification and biomimetic applications

The present overview is intended to point the readers' attention to the important subject of calcium orthophosphates. This type of materials is of special significance for human beings, because they represent the inorganic part of major normal (bones, teeth and antlers) and pathological (i.e., those appearing due to various diseases) calcified tissues of mammals. For example, atherosclerosis results in blood vessel blockage caused by a solid composite of cholesterol with calcium orthophosphates, while dental caries and osteoporosis mean a partial decalcification of teeth and bones, respectively, that results in replacement of a less soluble and harder biological apatite by more soluble and softer calcium hydrogenphosphates. Therefore, the processes of both normal and pathological calcifications are just an in vivo crystallization of calcium orthophosphates. Similarly, dental caries and osteoporosis might be considered an in vivo dissolution of calcium orthophosphates. Thus, calcium orthophosphates hold a great significance for humankind, and in this paper, an overview on the current knowledge on this subject is provided.

Novel biopolymer-coated hydroxyapatite foams for removing heavy-metals from polluted water

3D-macroporous biopolymer-coated hydroxyapatite (HA) foams have been developed as potential devices for the treatment of lead, cadmium and copper contamination of consumable waters. These foams have exhibited a fast and effective ion metal immobilization into the HA structure after an in vitro treatment mimicking a serious water contamination case. To improve HA foam stability at contaminated aqueous solutions pH, as well as its handling and shape integrity the 3D-macroporous foams have been coated with biopolymers polycaprolactone (PCL) and gelatine cross-linked with glutaraldehyde (G/Glu). Metal ion immobilization tests have shown higher and fast heavy metals captured as function of hydrophilicity rate of biopolymer used. After an in vitro treatment, foam morphology integrity is guaranteed and the uptake of heavy metal ions rises up to 405 μmol/g in the case of Pb(2+), 378 μmol/g of Cu(2+) and 316 μmol/g of Cd(2+). These novel materials promise a feasible advance in development of new, easy to handle and low cost water purifying methods.

Controlling phase distributions in macroporous composite materials through particle-stabilized foams

Aqueous foams stabilized by ceramic and thermoplastic polymeric particles provide a general method for producing novel porous materials because their extraordinary stability against disproportionation and drainage allows them to be dried and sintered into solid materials. Here, we report the different microstructures that can be obtained from liquid foams stabilized by binary mixtures of particles when the interfacial energies between the particles and the air-liquid interfaces are manipulated to promote either preferential or competitive self-assembly of the particles at the foam interface. Modification of the interfacial energies was accomplished through surface modification of the particles or by decreasing the surface tension of the aqueous phase. Materials derived from liquid foams stabilized by poly(vinylidene fluoride) (PVDF) and alumina (Al(2)O(3)) particles are investigated. However, as is shown, the method can be extended to other polymeric and ceramic particles and provides the possibility to manufacture a wide range of porous composite materials.