Environmental applications and risks of engineered nanomaterials in removing petroleum oil in soil

Oil-contaminated soil posed serious threats to the ecosystems and human health. The unique and tunable properties of engineered nanomaterials (ENMs) enable new technologies for removing and repairing oil-contaminated soil. However, few studies systematically examined the linkage between the change of physicochemical properties and the removal efficiency and environmental functions (e.g., potential risk) of ENMs, which is vital for understanding the ENMs environmental sustainability and utilization as a safety product. Thus, this review briefly summarized the environmental applications of ENMs to removing petroleum oil from complex soil systems: Theoretical and practical fundamentals (e.g., excellent physicochemical properties, environmental stability, controlled release, and recycling technologies), and various ENMs (e.g., iron-based, carbon-based, and metal oxides nanomaterials) remediation case studies. Afterward, this review highlights the removing mechanism (e.g., adsorption, photocatalysis, oxidation/reduction, biodegradation) and the impact factor (e.g., nanomaterials species, natural organic matter, and soil matrix) of ENMs during the remediation process in soil ecosystems. Both positive and negative effects of ENMs on terrestrial organisms have been identified, which are mainly derived from their diverse physicochemical properties. In linking nanotechnology applications for repairing oil-contaminated soil back to the physical and chemical properties of ENMs, this critical review aims to raise the research attention on using ENMs as a fundamental guide or even tool to advance soil treatment technologies.

Application of cellulose to chromatographic media: Cellulose dissolution, and media fabrication and derivatization

As the cornerstone of chromatographic technology, the development of high-performance chromatographic media is a crucial means to enhance the purification efficiency of biological macromolecules. Cellulose is a popular biological separation medium due to its abundant hydroxyl group on the surface, easy modification and, weak non-specific adsorption. In this paper, the development of cellulosic solvent systems, typical preparation methods of cellulosic chromatographic media, and the enhancement of chromatographic properties of cellulosic chromatographic media by polymeric ligand grafting strategies and their mechanism of action are reviewed. Ultimately, based on the current research status, a promising outlook for the preparation of high-performance cellulose-based chromatographic media was presented.

Facile synthesis of core\shell Fe3O4@mSiO2(Hb) and its application for organic wastewater treatment

Treatment of organic wastewater is a challenging task. Biological techniques using biocatalysts have shown their benefits in organic wastewater treatment. In this research, a novel biocatalyst was developed by encapsulation of Fe3O4 microspheres and haemoglobin (Hb) with mesoporous silica, named Fe3O4@mSiO2(Hb). Fe3O4@mSiO2(Hb) exhibited typical mesoporous characteristics (mesoporous silica), magnetic feature (Fe3O4) and peroxidase activity (Hb). The results showed that the immobilization of Hb into Fe3O4@mSiO2 did not affect its activity. In addition, Fe3O4@mSiO2(Hb) exhibited a higher efficiency in the peroxidation of aromatic compounds than free Hb. The peroxidase activity of the synthesized biocatalyst was estimated to be 120 Ug^-1, which was almost four times greater than that of previously reported immobilized Hb. Also, the Km of Fe₃O₄@mSiO₂(Hb) was similar to that of the free Hb and it was estimated to be 4.3 × 10^-4 μM, indicating that the activity of the Hb in the immobilized enzyme was not affected after immobilization. The immobilized enzyme was also found to be stable, recyclable and reusable. Taken together, these results indicate that the Fe₃O₄@mSiO₂(Hb) has good potential to be used for treating organic wastewater containing aromatic compounds. The magnetically separable novel biocatalyst developed in this study provided not only a more suitable microenvironment for retaining the activity of Hb, but also demonstrated enhanced stability and activity under unfavorable conditions.

Biofunctionalized nanomaterials for in situ clean-up of hydrocarbon contamination: A quantum jump in global bioremediation research

Interfacing organic or inorganic nanoparticles with biological entities or molecules or systems with the aim of developing functionalized nano-scale materials or composites for remediation of persistent organic hydrocarbon pollutants (such as monocyclic and polycyclic aromatic hydrocarbons, MAH/PAH) has generated great interest and continues to grow almost unabated. However, the usefulness and potency of these materials or conjugates hinges over several key barriers, including structural assembly with fine-tuned control over nanoparticle/biomolecule ratio, spatial orientation and activity of biomolecules, the nano/bio-interface strategy and hierarchical architecture, water-dispersibility and long term colloidal stability in environmental media, and non-specific toxicity. The present review thus critically analyses, discusses and interprets recently reported attempts and approaches to functionalize nanoparticles with biomolecules. Since there is no comprehensive and critical reviews on the applications of nanotechnology in bioremediation of MAHs/PAHs, this overview essentially captures the current global scenario and vision on the use and future prospects of biofunctionalized nanomaterials with respect to their strategic interactions involved at the nano/bio-interface essential to understand and decipher the structural and functional relationships and their impact on persistent hydrocarbon remediation.

Poly-cyclodextrin cryogels with aligned porous structure for removal of polycyclic aromatic hydrocarbons (PAHs) from water

Cyclodextrins (CDs) are sugar-based cyclic oligosaccharides, which form inclusion complexes with small guest molecules through their hydrophobic cavity. Here we successfully synthesized highly porous poly-cyclodextrin (poly-CD) cryogels, which were produced under cryogenic conditions by the cross-linking of amine-functional CDs with PEG-based diepoxide cross-linker. The poly-CD cryogels showed aligned porous network structures owing to the directional freezing of the matrix, of which the pore size and architecture exposed variations depending on the composition of the reactants. The cryogels were employed for the removal of genotoxic polycyclic aromatic hydrocarbons (PAHs) from aqueous solutions. They reached PAH sorption capacities as high as 1.25mg PAH per gram cryogel. This high sorption performance is due to interactions between PAHs and the complete swollen network, and thus, is not restricted by interfacial adsorption. Given that the hydrophilic nature of the components, the sorption performance could only be attributed to the inclusion complex formation of CDs with PAH molecules. The poly-CD cryogels could be recycled with an exposure to ethanol and reused without any significant loss in the sorption capacity of PAHs.

Facile synthesis of thiazole-functionalized magnetic microspheres for highly specific separation of heme proteins

Thiazole-functionalized magnetic microspheres which exhibited high selectivity to capture hemoglobin with a binding capacity of 2.02 g g⁻¹ were successfully synthesized.

Thiazolium-functionalized polymer-coated magnetic microspheres for the selective recognition and separation of hemoglobin

Thiazolium-functionalized magnetic microspheres, which exhibited an excellent selectivity and a high binding capacity for haemoglobin (5030 mg g⁻¹), were successfully synthesized.

Agarose and Its Derivatives as Supports for Enzyme Immobilization

Agarose is a polysaccharide obtained from some seaweeds, with a quite particular structure that allows spontaneous gelation. Agarose-based beads are highly porous, mechanically resistant, chemically and physically inert, and sharply hydrophilic. These features-that could be further improved by means of covalent cross-linking-render them particularly suitable for enzyme immobilization with a wide range of derivatization methods taking advantage of chemical modification of a fraction of the polymer hydroxyls. The main properties of the polymer are described here, followed by a review of cross-linking and derivatization methods. Some recent, innovative procedures to optimize the catalytic activity and operational stability of the obtained preparations are also described, together with multi-enzyme immobilized systems and the main guidelines to exploit their performances.

A self-directed and reconstructible immobilization strategy: DNA directed immobilization of alkaline phosphatase for enzyme inhibition assays

A DNA-directed immobilization technique is used to develop a common method for the reversible and self-directed immobilization of enzymes.

Inorganic materials as supports for covalent enzyme immobilization: methods and mechanisms

Several inorganic materials are potentially suitable for enzymatic covalent immobilization, by means of several different techniques. Such materials must meet stringent criteria to be suitable as solid matrices: complete insolubility in water, reasonable mechanical strength and chemical resistance under the operational conditions, the capability to form manageable particles with high surface area, reactivity towards derivatizing/functionalizing agents. Non-specific protein adsorption should be always considered when planning covalent immobilization on inorganic solids. A huge mass of experimental work has shown that silica, silicates, borosilicates and aluminosilicates, alumina, titania, and other oxides, are the materials of choice when attempting enzyme immobilizations on inorganic supports. More recently, some forms of elemental carbon, silicon, and certain metals have been also proposed for certain applications. With regard to the derivatization/functionalization techniques, the use of organosilanes through silanization is undoubtedly the most studied and the most applied, although inorganic bridge formation and acylation with selected acyl halides have been deeply studied. In the present article, the most common inorganic supports for covalent immobilization of the enzymes are reviewed, with particular focus on their advantages and disadvantages in terms of enzyme loadings, operational stability, undesired adsorption, and costs. Mechanisms and methods for covalent immobilization are also discussed, focusing on the most widespread activating approaches (such as glutaraldehyde, cyanogen bromide, divinylsulfone, carbodiimides, carbonyldiimidazole, sulfonyl chlorides, chlorocarbonates, N-hydroxysuccinimides).

Functionalized ceramics for biomedical, biotechnological and environmental applications

Surface functionalization has become of paramount importance and is considered a fundamental tool for the development and design of countless devices and engineered systems for key technological areas in biomedical, biotechnological and environmental applications. In this review, surface functionalization strategies for alumina, zirconia, titania, silica, iron oxide and calcium phosphate are presented and discussed. These materials have become particularly important concerning the aforementioned applications, being not only of great academic, but also of steadily increasing human and commercial, interest. In this review, special emphasis is given to their use as biomaterials, biosensors, biological targets, drug delivery systems, implants, chromatographic supports for biomolecule purification and analysis, and adsorbents for toxic substances and pollutants. The objective of this review is to provide a broad picture of the enormous possibilities offered by surface functionalization and to identify particular challenges regarding surface analysis and characterization.

Hemoglobin immobilized with modified "fish-in-net" approach for the catalytic removal of aniline

Blood is a waste product of the slaughter industry, while its main component hemoglobin (Hb) is a pseudo-peroxidase which is able to oxidize polycyclic aromatic hydrocarbons (PAHs) in the presence of H(2)O(2). In order to use Hb for wastewater treatment, we encapsulated it in silica-based matrix by modified "fish-in-net" approach. The as-synthesized catalysts were characterized by SEM, TEM, BET and solid-state UV-vis spectroscopy. It was found that Hb was partially homogeneously dispersed in microspheres and showed more stable peroxidase-like activity than free Hb. Moreover, it had substantially increased storage stability as well as pH stability. It was used as biocatalyst to remove aniline in aqueous solution and gave a reduction of 65% aniline removal, while 76% in the presence of additive PEG. No significant activity loss was observed after ten runs. These experimental results suggest that the resultant product was a promising biocatalyst for aromatic wastewater treatment.

Hemoglobin (Hb) immobilized on amino-modified magnetic nanoparticles for the catalytic removal of bisphenol A

Catalytic removal of bisphenol A from aqueous solution with hemoglobin immobilized on amino-modified magnetic nanoparticles as an enzyme catalyst was reported. The amino-modified magnetite nanoparticles were firstly prepared by the coprecipitation of Fe(2+) and Fe(3+) with NH(3)·H(2)O and then modified by 3-aminopropyltriethoxysilane. The immobilization process was optimized by examining enzyme concentration, glutaraldehyde concentration, cross-link time, and immobilization time. The optimum conditions for the removal of bisphenol A with immobilized hemoglobin were also investigated. Under the optimality conditions, the removal efficiency of bisphenol A was about 80.3%. The immobilization had a beneficial effect on the stability of hemoglobin and conversions of bisphenol A. According to the proposed breakdown pathway and the intermediates, the enzyme-catalytic removal of bisphenol A by the immobilized hemoglobin is considered to be an effective method.