Modified Sulfanilamide Release from Intelligent Poly(N-isopropylacrylamide) Hydrogels

The aim of this study was to examine homopolymeric poly(N-isopropylacrylamide), p(NIPAM), hydrogels cross-linked with ethylene glycol dimethacrylate as carriers for sulfanilamide. Using FTIR, XRD and SEM methods, structural characterization of synthesized hydrogels before and after sulfanilamide incorporation was performed. The residual reactants content was analyzed using the HPLC method. The swelling behavior of p(NIPAM) hydrogels of different crosslinking degrees was monitored in relation to the temperature and pH values of the surrounding medium. The effect of temperature, pH, and crosslinker content on the sulfanilamide release from hydrogels was also examined. The results of the FTIR, XRD, and SEM analysis showed that sulfanilamide is incorporated into the p(NIPAM) hydrogels. The swelling of p(NIPAM) hydrogels depended on the temperature and crosslinker content while pH had no significant effect. The sulfanilamide loading efficiency increased with increasing hydrogel crosslinking degree, ranging from 87.36% to 95.29%. The sulfanilamide release from hydrogels was consistent with the swelling results-the increase of crosslinker content reduced the amount of released sulfanilamide. After 24 h, 73.3-93.5% of incorporated sulfanilamide was released from the hydrogels. Considering the thermosensitivity of hydrogels, volume phase transition temperature close to the physiological temperature, and the satisfactory results achieved for sulfanilamide incorporation and release, it can be concluded that p(NIPAM) based hydrogels are promising carriers for sulfanilamide.

Antimicrobial Activity of Silver, Copper, and Zinc Ions/Poly(Acrylate/Itaconic Acid) Hydrogel Matrices

The design and use of new potent and specific antimicrobial systems are of crucial importance in the medical field. This will help relieve, fight, and eradicate infections and thus improve human health. The use of metals in various forms as antimicrobial therapeutics has been known since ancient times. In this sense, polymeric hydrogel matrices as multifunctional materials and in combination with various metal forms can be a great alternative to conventional treatments for infections. Hydrogels possess high hydrophilicity, specific three-dimensional networks, fine biocompatibility, and cell adhesion and are therefore suitable as materials for the loading of active antimicrobial agents and acting in antimicrobial areas. The biocompatible nature of hydrogels’ matrices makes them a convenient starting platform to develop biocompatible, selective, active controlled-release antimicrobial materials. Hydrogels based on acrylate and itaconic acid were synthesized and loaded with silver (Ag+), copper (Cu2+), and zinc (Zn2+) ions as a controlled release and antimicrobial system to test release properties and antimicrobial activity in contact with microbes. The metal ions/hydrogel systems exhibited favorable biocompatibility, release profiles, and antimicrobial activity against methicillin-sensitive Staphylococcus aureus (MSSA), methicillin-resistant Staphylococcus aureus (MRSA), Staphylococcus aureus, Escherichia coli, and Candida albicans microbes, and have shown that they have the capacity to “fight” with the life-threatening infections. Antimicrobial activity depends on types of metal ions, the composition of polymeric matrices, as well as the types of microbes. Designed metal ions/poly(acrylate/itaconic acid) antimicrobial systems have shown to have good potential as antimicrobial therapeutics and suitable biomaterials for medical applications.

Engineering and Application Perspectives on Designing an Antimicrobial Surface

Infections, contaminations, and biofouling resulting from micro- and/or macro-organisms remained a prominent threat to the public health, food industry, and aqua-/marine-related applications. Considering environmental and drug resistance concerns as well as insufficient efficacy on biofilms associated with conventional disinfecting reagents, developing an antimicrobial surface potentially improved antimicrobial performance by directly working on the microbes surrounding the surface area. Here we provide an engineering perspective on the logic of choosing materials and strategies for designing antimicrobial surfaces, as well as an application perspective on their potential impacts. In particular, we analyze and discuss requirements and expectations for specific applications and provide insights on potential misconnection between the antimicrobial solution and its targeted applications. Given the high translational barrier for antimicrobial surfaces, future research would benefit from a comprehensive understanding of working mechanisms for potential materials/strategies, and challenges/requirements for a targeted application.

Self-healing hydrogel with cross-linking induced thermo-response regulated light emission property

With increasing attention paid to smart materials, self-healing hydrogels with thermo-responses have been greatly developed in the past several years. At the same time, fluorescent or light emitting polymers have been studied for use as bioimaging tools and drug delivery vehicles. In this research, thermo-responsive self-healing hydrogels with aggregation-induced emission (AIE) property were prepared from tetraphenylethylene (TPE) containing TPE-poly(N,N-dimethylacrylamide-stat-Diacetone acrylamide) [TPE-P(DMA-stat-DAA)] cross-linked by diacylhydrazide. In addition to self-healing based on reversible acylhydrazone bond, the copolymer and hydrogels showed thermo-responses. The lower critical solution temperature (LCST) of the hydrogels was regulated to body temperature. Based on the AIE property of the TPE unit, the hydrogels showed an enhanced light emitting property above the LCST, which was regulated by temperature change. The in vitro cytotoxicity experiment showed that the hydrogels are not toxic, and the DOX release rate can be enhanced by low pH values, which endowed this kind of thermo-responsive light emitting hydrogel with great potential for applications in bio-diagnosis, drug delivery, artificial organs with light sensitive detection, etc.

Stimulus Sensitive Smart Nanoplatforms: An Emerging Paradigm for the Treatment of Skin Diseases

Background:

Over the past century, the prevalence of skin diseases has substantially increased. These diseases present a significant physical, emotional and socio-economic burden to the society. Such conditions are also associated with a multitude of psychological traumas to the suffering patients. The effective treatment strategy implicates targeting of drugs to the skin. The field of drug targeting has been revolutionized with the advent of nanotechnology. The emergence of stimulus-responsive nanoplatforms has provided remarkable control over fundamental polymer properties for external triggers. This enhanced control has empowered pioneering approaches in the treatment of chronic inflammatory skin diseases.

Objective:

Our aim was to investigate the studies on smart nanoplatforms that exploit the altered skin physiology under diseased conditions and provide site-specific controlled drug delivery.

Method:

All literature search regarding the advances in stimulus sensitive smart nanoplatforms for skin diseases was done using Google Scholar and Pubmed.

Conclusion:

Various stimuli explored lately for such nano platforms are pH, temperature, light and magnet. Although, the scientists have actively taken up this research topic but there are still certain lacunaes associated which have been discussed in this review. Further, an interdisciplinary collaboration between the healthcare providers and pharmacists is a pivotal requirement for such systems to be available for patients.

Antimicrobial hydrogels: promising materials for medical application

The rapid emergence of antibiotic resistance in pathogenic microbes is becoming an imminent global public health problem. Local application of antibiotics might be a solution. In local application, materials need to act as the drug delivery system. The drug delivery system should be biodegradable and prolonged antibacterial effect should be provided to satisfy clinical demand. Hydrogel is a promising material for local antibacterial application. Hydrogel refers to a kind of biomaterial synthesized by a water-soluble natural polymer or a synthesized polymer, which turns into gel according to the change in different signals such as temperature, ionic strength, pH, ultraviolet exposure etc. Because of its high hydrophilicity, unique three-dimensional network, fine biocompatibility and cell adhesion, hydrogel is one of the suitable biomaterials for drug delivery in antimicrobial areas. In this review, studies from the past 5 years were reviewed, and several types of antimicrobial hydrogels according to different ingredients, different preparations, different antimicrobial mechanisms, different antimicrobial agents they contained and different applications, were summarized. The hydrogels loaded with metal nanoparticles as a potential method to solve antibiotic resistance were highlighted. Finally, future prospects of development and application of antimicrobial hydrogels are suggested.

Antimicrobial activity of silver nanoparticles encapsulated in poly-N-isopropylacrylamide-based polymeric nanoparticles

In this study, we analyzed the antimicrobial activities of poly-N-isopropylacrylamide (pNIPAM)-based polymeric nanoparticles encapsulating silver nanoparticles (AgNPs). Three sizes of AgNP-encapsulating pNIPAM- and pNIPAM-NH2-based polymeric nanoparticles were fabricated. Highly stable and uniformly distributed AgNPs were encapsulated within polymeric nanoparticles via in situ reduction of AgNO3 using NaBH4 as the reducing agent. The formation and distribution of AgNPs was confirmed by UV-visible spectroscopy, transmission electron microscopy, and inductively coupled plasma optical emission spectrometry, respectively. Both polymeric nanoparticles showed significant bacteriostatic activities against Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacteria depending on the nanoparticle size and amount of AgNO3 used during fabrication.

Temperature-regulated aggregation-induced emissive self-healable hydrogels for controlled drug delivery

Thermoresponsive copolymers TPE-[P(DMA-stat-DAA)]₂ containing a tetraphenylethylene (TPE) moiety and a ketone group were synthesized.

On-Demand Gas-to-Liquid Process To Fabricate Thermoresponsive Antimicrobial Nanocomposites and Coatings

Antimicrobial material is emerging as a major component of the mitigation strategy against microbial growth on abiotic surfaces. In this work, a newly designed process is proposed to fabricate thermoresponsive antimicrobial nanocomposites (TANs) and coatings (TACs) as an on-demand system. Thermoresponsive polymer (TRP)-incorporated silver (Ag) nanocomposites with silica nanoparticles (SNPs) or carbon nanotubes (CNTs; Ag-SNP@TRP or Ag-CNT@TRP) were produced by a single-pass gas-to-liquid process. The SNPs or CNTs were first produced by spark ablation and successively injected for dispersal in a liquid cell containing polydimethylsiloxane, poly(N-isopropylacrylamide), and silver nitrate under ultrasound irradiation. Suspensions of Ag-SNP@TRP or Ag-CNT@TRP nanocomposites were then deposited on a touch screen panel (TSP) protection film via electrohydrodynamic spray to form transparent antibacterial coatings. Fundamental antibacterial activities of TANs were evaluated against Escherichia coli and Staphylococcus epidermidis. The TANs showed stronger antibacterial activities at the higher temperature for all testing conditions. Lower minimum inhibitory concentrations of Ag-SNP@TRP and Ag-CNT@TRP nanocomposites were required against the two bacteria at 37 °C compared to those at 27 °C. The TACs on display showed elevated antimicrobial activity when the panel was turned on (38.1 °C) compared with when the panel was turned off (23.8 °C). This work provides a utilizable concept to continuously fabricate TANs and TACs, and it specifically offers stimuli-sensitive control of antimicrobial activity on TSPs, including other frequently touched surfaces.

A self-defensive antibacterial coating acting through the bacteria-triggered release of a hydrophobic antibiotic from layer-by-layer films

Drug delivery systems play important roles in the construction of antibacterial coatings on the surfaces of biomaterials. However, excessive release of antibiotics in the environment can lead to the generation of resistant bacteria. A methoxy poly(ethylene glycol)-poly(ε-caprolactone)-chitosan (MPEG-PCL-CS) block polymer was prepared through covalent grafting of CS onto MPEG-PCL. MPEG-PCL-CS micelles were prepared and showed a high load capacity for the hydrophobic antibiotic triclosan (TCA) (∼5 wt%). Multilayer films were constructed through self-assembling TCA/MPEG-PCL-CS cationic micelles with poly(acrylic acid) (PAA). Transmission and scanning electron microscopy analyses confirmed the presence of micelles on the surface (20-40 nm). As barriers for the antibiotic, the (TCA/MPEG-PCL-CS)/PAA multilayer films contained a high load of TCA (255 μg cm-2). Importantly, the multilayer films showed both bacteria-triggered and pH-responsive release properties and can be used as self-defensive antibacterial coatings. Bacterial adhesion caused a local acidic environment and altered the permeability of the multilayer films, promoting drug release. Both in vitro and in vivo antibacterial tests indicated a high bactericidal activity of drug-loaded multilayer films against both E. coli and S. aureus.

Self-healable polymer gels with multi-responsiveness of gel–sol–gel transition and degradability

P(NIPAM-co-FPA) contains an aldehyde group and a phenolic ester moiety is synthesized. The aldehyde group can form reversible covalent bonds with hydrazide to endow the polymer gels with self-healing properties. The self-healable polymer gel can be degraded in Na₂CO₃ solution based on cleavage of phenolic ester bond.

Mechanical properties of PNIPAM based hydrogels: A review

Materials which adjust their properties in response to environmental factors such as temperature, pH and ionic strength are rapidly evolving and known as smart materials. Hydrogels formed by smart polymers have various applications. Among the smart polymers, thermoresponsive polymer poly(N-isopropylacrylamide)(PNIPAM) is very important because of its well defined structure and property specially its temperature response is closed to human body and can be finetuned as well. Mechanical properties are critical for the performance of stimuli responsive hydrogels in diverse applications. However, native PNIPAM hydrogels are very fragile and hardly useful for any practical purpose. Intense researches have been done in recent decade to enhance the mechanical features of PNIPAM hydrogel. In this review, several strategies including interpenetrating polymer network (IPN), double network (DN), nanocomposite (NC) and slide ring (SR) hydrogels are discussed in the context of PNIPAM hydrogel.

Self-Activated Healable Hydrogels with Reversible Temperature Responsiveness

The self-healable polymer hydrogel along with reversible temperature responsiveness was prepared through self-catalyzed dynamic acylhydrazone formation and exchange without any additional stimulus or catalyst. The hydrogel was prepared from a copolymer of N-isopropylacrylamide and acylhydrazine P(NIPAM-co-AH) cross-linked by PEO dialdehyde. Besides self-healed under catalysis of acid and aniline, the hydrogel can also self-heal activated by excess of acylhydrazine groups. Without interference of catalyst during the hydrogel formation and self-healing, this kind of hydrogel prepared from biocompatible polymers can be used in more areas including biotechnology and be more persistent. The hydrogel with a large part of the PNIPAM segment also showed temperature responsiveness around body temperature influenced by the variation in group ratio. This self-healable hydrogel has great potential application in areas related to bioscience and biotechnology.

Zinc-triggered hydrogelation of self-assembled small molecules to inhibit bacterial growth

There is a significant need to develop antibacterial materials that could be applied locally and directly to the places surrounded by large amount of bacteria, in order to address the problems of bacterial antibiotic-resistance or irreversible biofilm formation. Hydrogels are thought to be suitable candidates due to their versatile applications in biomedical field. Among them, small molecular hydrogels have been paid lots of attention because they are easy to design and fabricate and often sensitive to external stimuli. Meanwhile, the antibacterial activity of metal ions are attracting more and more attention because resistance to them are not yet found within bacteria. We therefore designed the zinc ion binding peptide of Nap-GFFYGGGHGRGD, who can self-assemble into hydrogels after binds Zn(2+) and inhibit the growth of bacteria due to the excellent antibacterial activity of Zn(2+). Upon the addition of zinc ions, solutions containing Nap-GFFYGGGHGRGD transformed into supramolecular hydrogels composed of network of long nano-fibers. Bacterial tests revealed an antibacterial effect of the zinc triggered hydrogels on E. coli. The studied small molecular hydrogel shows great potential in locally addressing bacterial infections.

Designing nanogel carriers for antibacterial applications

We have developed a novel and simple synthesis route to create nanosized (∼5nm) silver nanoparticles (Ag NPs) embedded in a biocompatible nanogel (NG) comprising degradable, natural polymers, namely dextran and lysozyme. In this study, we prepared hybrid nanogels with varying lysozyme content, evaluated their potential to reduce Ag NPs in situ (using ultraviolet-visible spectroscopy, cryo-transmission electronic microscopy, thermogravimetric analysis and Fourier transform infrared spectroscopy) and determined their antibacterial properties against Escherichia coli and Staphylococcus aureus. Lysozyme was found to enhance nucleation and stabilization of Ag NPs while limiting their growth. As lysozyme concentration increased, larger nanogels with greater loading of smaller Ag NPs were obtained. The antibacterial properties of hybrid NGs were found to depend upon nanogel type and bacterial conditions. Hybrid nanogels with the largest Ag NPs showed the lowest minimum inhibition concentration. However, the greatest bacterial killing efficiency (up to 100%) occurred within 1h if the bacteria were exposed to hybrid nanogels with smaller Ag NPs while agitating the medium. These results suggest that nanogel properties as well as antibacterial activity can be tuned by varying the lysozyme content. By targeting drug delivery (e.g. ligand grafted surface), these nanogels can be used to prevent biofilm formation and control infection without the complications (i.e. overexposure) associated with classical antibiotic delivery platforms.

Advanced dextran based nanogels for fightingStaphylococcus aureusinfections by sustained zinc release

Zinc loaded polysaccharide based nanogel shell hybrid structures with prolonged zinc retention and antibacterial activity are presented.

A facile route to synthesize nanogels doped with silver nanoparticles

In this work, we describe a simple method to prepare hybrid nanogels consisting of a biocompatible core-shell polymer host containing silver nanoparticles. First, the nanogels (NG, ~160 nm) containing a lysozyme rich core and a dextran rich shell, are prepared via Maillard and heat-gelation reactions. Second, silver nanoparticles (Ag NPs, ~5nm) are synthesized in situ in the NG solution without requiring additional reducing agents. This approach leads to stable Ag NPs located in the NG. Furthermore, we demonstrate that the amount of Ag NPs in the NG can be tuned by varying silver precursor concentration. Hybrid nanogels with silver nanoparticles have potential in antimicrobial, optical and therapeutic applications.