A bisalicylhydrazone based fluorescent probe for detecting Al3+ with high sensitivity and selectivity and imaging in living cells

A bisalicylhydrazone based fluorescence probe, bisalicyladehyde benzoylhydrazone (BS-BH), has been designed to detect Al3+. It exhibited high sensitivity and selectivity towards Al3+ in methanol-water media in physiological condition. Large stokes shifts (∼122 nm) and over ∼1000-fold enhanced fluorescence intensity were observed, which was ascribed to the formation of the two relatively independent rigid extended π conjugated systems bridged by biphenyl group when binding with Al3+. A 1:2 binding ratio between BS-BH and Al3+ was shown by Job's plot. Based on the fluorescence titration data, the detection limit was down to 3.50 nM and the association constant was evaluated to be 1.12 × 109 M-2. The plausible fluorescence sensing mechanism of suppressed ESIPT, inhibited PET, activated CHEF and restricted C = N isomerization was confirmed by a variety of spectral experiments and DFT / TD-DFT calculations. The reversibility of recognition of Al3+ for probe BS-BH was validated by adding Na2-EDTA. In addition, the MTT assay showed the good biocompatibility of BS-BH and BS-BH could be used for imaging Al3+ in living cells.

Turn-On Solid-State Fluorescent Determination of Zinc Ion by Quinoline-Based Covalent Organic Framework

A new quinoline-based COF (covalent organic framework), obtained by Povarov reaction, containing 2,6-diisopropylphenyl moieties as substituents over the heterocyclic ring is described for detecting Zn2+ in aqueous solution. The introduction of the mentioned bulky phenyl rings into the network favors an increase of the distance between the reticular sheets and their arrangement, obtaining a new material with an alternating AB type stacking. The new material exhibits good selectivity to detect Zn2+ by fluorescence emission in aqueous solutions up to a concentration of 1.2 × 10-4 m of the metal ion. In order to have a deeper insight into the interaction between the COF and the zinc cation, a thorough spectroscopical, microscopical, and theoretical study is also presented and discussed in this communication.

Synthesis of Cu (II) and Zn (II) Complexes of a Quinoline Based Flexible Amide Receptor as Fluorescent Probe for Dihydrogen Phosphate and Hydrogen Sulphate and Their Antibacterial Activity

A novel 8-hydroxy quinoline-derived amide receptor, in conjunction with its Cu (II) and Zn (II) complexes, has been strategically developed to function as remarkably efficient fluorescent receptors with a distinct capability for anion sensing. The comprehensive characterization of the synthesized compounds were achieved through UV-Vis, IR, NMR, and HRMS spectroscopic techniques. Among the Cu (II) and Zn (II) complexes, the latter exhibits superior selectivity for anions, specifically dihydrogen phosphate and hydrogen sulfate, as their tetrabutylammonium salts in a 9:1 acetonitrile-water (v/v) mixture. The Cu (II) complex demonstrates enhanced anion binding compared to the amide ligand, albeit with reduced selectivity. Furthermore, the affinity was evaluated using the Benesi-Hildebrand plot. The binding constants and Limit of Detection (LOD) for both complexes were precisely quantified. The Job plot illustrates a clear 1:1 binding interaction between the metal complexes and the guest anions. Significantly, both metal-complex receptors display a broad spectrum of antibacterial activity, against both gram-positive and gram-negative bacteria. It is worth highlighting that the Zn (II) complexed receptor outperforms the Cu (II) complexed receptor, as evidenced by its considerably lower Minimum Inhibitory Concentration (MIC) value against both bacterial strains.

Chromene Carbohydrazide- Schiff Base as a Highly Selective Turn-Off Fluorescence Chemosensor for In3+ Ion and its Application

A new 7-(diethylamino)-2-oxo-2 H-chromene-3-carbohydrazide design to synthesize a simple Schiff-base condition. The synthesized molecules' (probe L) photophysical properties were investigated in various solvent systems and solvent-poor-solvent assays. Probe L exhibits the absorbance band at 440 nm and the emission band at 488 nm in DMSO: H2O (7:3, v/v). Further, probe L shows selective turn-off emission recognition of In3+ ions in DMSO: H2O (7:3, pH = 7.4). By Job's plot and ESI mass analysis, probe L forms a 1:2 stoichiometry complex with an estimated association constant of 4.04 × 104 M- 2 with In3+ ions. Metal induces CHEQ (chelation-caused fluorescence quenching) to reduce the intensity of probe L's emission, and the estimated quenching constant was 4.52 × 104 M- 1. The limit of detection was found to be 5.93 nM; the time response of the sensor is instantaneous, and its reversible nature was confirmed using EDTA additions. Solid substrates (test strips) were designed and tested for fast, reliable, user-friendly, and real-time sensing of In3+ ions for on-site applications. The binding mechanism of probe L with In3+ ions was investigated using 1H NMR titration and DFT/TD-DFT studies.

Synthesis of Fluorescent Pyrazoline Sensors as Versatile Tool for Zinc ion Detection: A Mini-Review

Zinc ions are one of the 2nd most abundant mineral after iron and it is important for immune system, enzymatic catalysis, DNA synthesis, and maintaining structural integrity in humans. But, monitoring the Zn levels in human body poses more challenges. This review paper investigates (paper from 2010 to 2023) the synthesis of pyrazoline derivatives by different methods, including conventional methods and green chemistry protocol. These Pyrazoline derivatives highlighted for their potential application as chemo-sensor for Zn2+ ions recognition. Pyrazoline compounds exhibit excellent sensitivity & selectivity and emitting blue-light with high quantum yields and electroluminescence, along with a superior limit of detection. These derivatives are stable bioactive molecule, with well-known diverse biological activities. This review not only gives valuable insights into the essential role of Zinc in human physiology but also provides a practical method for accurate Zinc detection in various samples. Which holds the potential for advancements in health diagnostics and environmental monitoring. Because of their significant biological application and selectivity as sensors, researchers have much more attention to prepare green environmentally-friendly pyrazoline derivatives.

Proximity hybridization regulated dual-mode ratiometric biosensor for estriol detection in pregnancy serum

Sensitive and accurate determination of estriol level is vastly significant for the fetal growth and development. Herein, we constructed a dual-mode ratiometric biosensor for estriol assay combining the competitive immunoreaction, proximity hybridization with a two-step resonance energy transfer (RET) strategy. Estriol antibody and goat anti-rabbit antibody labeled DNA probes (Ab1-DNA1-Pt NPs and Ab2-DNA2) both hybridized with silver nanoclusters labeled DNA strands (H1-Ag NCs). Thus, the formed proximity hybridization enabled the occurrence of fluorescence RET (FL-RET, as the primary RET) between Ag NCs (donor) and Pt NPs (acceptor), quenching FL intensity of Ag NCs (FL off). When target estriol existed, the competitive reaction of Ab1-DNA1-Pt NPs with estriol and Ab2-DNA2 avoided the proximity hybridization. Then, the estriol-dependent H1-Ag NCs quenched electrochemiluminescence (ECL) emission of CdS quantum dots (CdS QDs, ECL off), generating ECL-RET (as the second RET). Consequently, according to the reverse changes of FL and ECL responses, this sensor realized the quantification of estriol from 1 to 100 ng/mL. Moreover, satisfactory results were achieved while testing estriol in pregnancy serum specimens, suggesting that the system is promising for potential application in samples analysis.

A new turn on coumarin-based fluorescence probe for Cr3+ detection in aqueous solution

Isatin-3-(7'-Methoxychromone-3'-methylidene) hydrazone (L) was synthesized based on chromone schiff base, and used to construct a novel sensor to detect Cr3+. Fluorescence detection experiments were carried out for a range of different concentrations of Cr3+ in aqueous solutions. A concentration calculation model was built on the basis of eliminating interference of excitation spectrum in the fluorescence spectra with mathematical method. Results showed that probe L displayed a 70-fold fluorescence enhancement upon the addition of Cr3+ due to the photo-induced electron transfer (PET) effect. On the other hand, metal ions except Cr3+ did not cause significant change in either the absorption or the fluorescence spectrum of L. In addition, L showed a good selectivity to Cr3+ over other metal cations, especially Al3+ and Cu2+. The probe L can detect Cr3+ highly and selectively by the direct chelation enhanced fluorescence with a detection limit of 3.14 × 10-6 M. Furthermore, benefiting from their good water solubility and biocompatibility, cell imaging and real-time monitoring of Cr3+ in living HepG2 cells were successfully achieved.

Aza-phenol Based Macrocyclic Probes Design for "CHEF-on" Multi Analytes Sensor: Crystal Structure Elucidation and Application in Biological Cell Imaging

Metal bound macrocyclic compounds found in biological systems inspired us to design and synthesize two Robson-type macrocyclic Schiff-base chemosensors, H ₂ L1 (H ₂ L1=1,11-dimethyl-6,16-dithia-3,9,13,19-tetraaza-1,11(1,3)-dibenzenacycloicosaphane-2,9,12,19-tetraene-1,11-diol) and H ₂ L2 (H ₂ L2=1,11-dimethyl-6,16-dioxa-3,9,13,19-tetraaza-1,11(1,3)-dibenzenacycloicosaphane-2,9,12,19-tetraene-1,11-diol). Both the chemosensors have been characterized with different spectroscopic techniques. They act as multianalyte sensor and exhibit "turn-on" fluorescence toward different metal ions in 1X PBS (Phosphate Buffered Saline) solution. In presence of Zn²⁺, Al³⁺, Cr³⁺ and Fe³⁺ ions, H ₂ L1 exhibits ∼6-fold enhancement of emission intensity, while H ₂ L2 shows ∼6-fold enhancement of emission intensity in the presence of Zn²⁺, Al³⁺ and Cr³⁺ ions. The interaction between the different metal ion and chemosensor have been examined by absorption, emission, and ¹H NMR spectroscopy as well as by ESI-MS⁺ analysis. We have successfully isolated and solved the crystal structure of the complex [Zn(H ₂ L1)(NO₃)]NO₃ (1) by X-ray crystallography. The crystal structure of 1 shows 1:1 metal:ligand stoichiometry and helps to understand the observed PET-Off-CHEF-On sensing mechanism. LOD values of H ₂ L1 and H ₂ L2 toward metal ions are found to be ∼10^-8 and ∼10^-7 M, respectively. Large Stokes shifts of the probes against analytes (∼100 nm) make them a suitable candidate for biological cell imaging studies. Robson type phenol based macrocyclic fluorescence sensors are very scarce in the literature. Therefore, the tuning of structural parameters as the number and nature of donor atoms, their relative locations and presence of rigid aromatic groups can lead to the design of new chemosensors, which can accommodate different charged/neutral guest(s) inside its cavity. The study of the spectroscopic properties of this type of macrocyclic ligands and their complexes might open a new avenue of chemosensors.

Solvent-regulated fluorescence off-on signaling of Ni(II) and Zn(II) with the formation of two mononuclear complexes with an ATP detection ability by Zn(II) assembly

The current study shows that Schiff base HL, (Z)-2,4-dibromo-6-(((piperidin-2-ylmethyl)imino)methyl)phenol, can be used successfully as a selective chemosensor for Zn(II) and Ni(II) among several competing cations in purely aqueous and semi-aqueous media. Under UV light in methanol-water (9 : 1) HEPES buffer, the receptor gives its response by changing its color to cyan color in the presence of Zn(II) and to bluish cyan color in the presence of Ni(II). Surprisingly, the chemosensor can only reliably identify Zn(II) in a hundred percent aqueous medium by changing its color to light yellow. UV and fluorescence studies in both aqueous and semi-aqueous media are used to further investigate this Zn(II) and Ni(II) recognition phenomenon. The high values of the host-guest binding constants, obtained by electronic and fluorescence titration, ensure that a strong bond exists between HL and Ni(II)/Zn(II). As anticipated, two highly luminescent mononuclear, crystalline compounds, complexes 1 and 2, have been developed by a separate reaction of HL and Zn(II)/Ni(II), and the high luminous properties are due to the occurrence of Chelation Enhanced Fluorescence (CHEF). According to the single crystal structure, the asymmetric units of both complexes consist of two deprotonated chemosensor units and one Zn(II)/Ni(II), leading to the formation of an octahedral complex. For Ni(II) and Zn(II) sensing, the predicted LOD is in the nanomolar range. Both complexes 1 and 2 are fluorescence active and studies to check their ATP detection ability, but intriguingly, only complex 2 is capable of detecting ATP in a fully aqueous solution. Finally, the live cell imaging study validates the two sensors' biosensing functionality.

A Simple Schiff Base as Fluorescent Probe for Detection of Al3+ in Aqueous Media and its Application in Cells Imaging

A novel fluorescence probe for the detection of Al³⁺ was developed based on methionine protected gold nanoclusters (Met-AuNCs). A fluorescent Schiff base (an aldimine) is formed between the aldehyde group of salicylaldehyde (SA) and the amino groups of Met on the AuNCs, and developed for selective detection of Al³⁺ in aqueous solution. Al³⁺ can strongly bind with the Schiff base ligands, accompanied by the blue-shift and an obvious fluorescence emission enhancement at 455 nm. The limits of detection (LODs) of the probe are 2 pmol L^-1 for Al³⁺. Moreover, the probe can successfully be used in fluorescence imaging of Al³⁺ in living cells (SHSY5Y cells), suggesting that the simple fluorescent probe has great potential use in biological imaging.

Multipronged diagnostic and therapeutic strategies for Alzheimer's disease

Alzheimer's disease (AD) is a progressive neurodegenerative disorder and a major contributor to dementia cases worldwide. AD is clinically characterized by learning, memory, and cognitive deficits. The accumulation of extracellular amyloid β (Aβ) plaques and neurofibrillary tangles (NFTs) of tau are the pathological hallmarks of AD and are explored as targets for clinical diagnosis and therapy. AD pathology is poorly understood and there are no fully approved diagnosis and treatments. Notwithstanding the gap, decades of research in understanding disease mechanisms have revealed the multifactorial nature of AD. As a result, multipronged and holistic approaches are pertinent to targeting multiple biomarkers and targets for developing effective diagnosis and therapeutics. In this perspective, recent developments in Aβ and tau targeted diagnostic and therapeutic tools are discussed. Novel indirect, combination, and circulating biomarkers as potential diagnostic targets are highlighted. We underline the importance of multiplexing and multimodal detection of multiple biomarkers to generate biomarker fingerprints as a reliable diagnostic strategy. The classical therapeutics targeting Aβ and tau aggregation pathways are described with bottlenecks in the strategy. Drug discovery efforts targeting multifaceted toxicity involving protein aggregation, metal toxicity, oxidative stress, mitochondrial damage, and neuroinflammation are highlighted. Recent efforts focused on multipronged strategies to rationally design multifunctional modulators targeting multiple pathological factors are presented as future drug development strategies to discover potential therapeutics for AD.

A quinazolin-based Schiff-base chemosensor for colorimetric detection of Ni2+ and Zn2+ ions and 'turn-on' fluorometric detection of Zn2+ ion

Herein, we have reported a novel quinazolin-based Schiff base chemosensor (E)-2-benzamido-N'-(1-(pyridin-2-yl)ethylidene)benzohydrazide (L). L has been designed, synthesised and characterised by ¹H-NMR, IR spectroscopy, ESI-MS spectrometry and theoretical studies. The receptor showed appreciable colorimetric λ _max shift for both Ni²⁺ and Zn²⁺ ions and fluorometric "turn on" response in presence of only Zn²⁺ ion. The Jobs plot analysis revealed that receptor forms 2 : 1 complex with both the ions Ni²⁺ and Zn²⁺, further confirmed by ESI-MS analysis. The single crystal structure of L-Ni²⁺ complex (1) has also been determined. The colorimetric detection limits were calculated to 7.9 nM and 7.5 nM respectively for Ni²⁺ and Zn²⁺ in methanol-Tris-HCl buffer medium (10 mM, pH 7.2, 1 : 1 v/v). The chemosensor L can be applied for the recovery of contaminated water samples.

Exploring the Photophysics of a Zn2+ Fluorescence Sensor and Its Sensing Mechanism

Sensor X is a turn-on sensor, which is applied in the fluorescence detection of Zn²⁺ ions. Its photophysical process is comprehensively investigated to clarify its weak fluorescence. With the aid of density functional theory (DFT) and time-dependent density functional theory (TDDFT), the potential energy surfaces (PES) of X on both ground and first excited states are studied. Excited-state intramolecular proton transfer (EPT) processes as well as molecule twisting motion are observed, which induces several minima on the excited-state PES. Transition states as well as rate constants for these dynamic processes are obtained to evaluate their occurrences. The twisting motion of the sensor is an ultrafast process, which is initiated by a specific EPT process and leads to a nonemissive twisted intramolecular charge transfer (TICT) state. The fluorescence of the sensor is barely observable because of the easily attainable TICT state on the excited PES. This mechanism is trustworthy and intrinsically different from the previously proposed mechanism. After clarifying the photophysical process of the sensor, the Zn²⁺ sensing mechanism is uncovered. Also, the selectivity against Cd²⁺ and Hg²⁺ is fully discussed.

A novel Near-Infrared fluorescent probe for Zn2+ and CN- double detection based on dicyanoisfluorone derivatives with highly sensitive and selective, and its application in Bioimaging

We have successfully synthesized NIRF as a near-infrared fluorescence probe for relay recognition of zinc and cyanide ions. The probe possesses well selectivity and anti-interference ability over common ions towards Zn²⁺ and CN^-. The results showed that Zn²⁺ and the probe formed [NIRF-Zn²⁺] complex after added Zn²⁺ into the probe NIRF solution, which emited red fluorescence. The probe can be used for quantitative detection of Zn²⁺ with a detection limit of 4.61 × 10^-8 M. It was determined that the binding stoichiometry between the NIRF and Zn²⁺ was 1:1 according to the job^,s curve. Subsequently, CN^- was added to the NIRF-Zn²⁺ solution, CN^- combined with Zn²⁺ to generate [Zn(CN^-)_x]^1-x due to the stronger binding ability between zinc ion and cyanogen, which lead to the red fluorescence disappeared. The quantitative detection of CN^- was realized with a detection limit of 7.9 × 10^*7 M. In addition, the probe has excellent specificity and selectivity for Zn²⁺ and CN^-. And the probe can be stable in a wide range of pH. Through biological experiments, we found that it can complete cell imaging in macrophages and imaging of living mice, which has application prospects in Bioimaging. In addition, the probe NIRF has good applicability for Zn²⁺ and CN^- detection in actual samples.

A Practical Hydrazine-Carbothioamide-Based Fluorescent Probe for the Detection of Zn2+: Applications to Paper Strip, Zebrafish and Water Samples

A practical hydrazine-carbothioamide-based fluorescent chemosensor TCC (N-(4-chlorophenyl)-2-(thiophene-2-carbonyl)hydrazine-1-carbothioamide) was applied for Zn2+ detection. TCC exhibited selective fluorescence emission for Zn2+ and did not show any interference with other metal ions. In particular, TCC was utilized for the detection of Zn2+ in paper strips, zebrafish and real water samples. TCC could detect Zn2+ down to 0.39 μM in the solution phase and 51.13 μM in zebrafish. The association ratio between TCC and Zn2+ was determined to be 2:1 by ESI-mass and Job plot. The sensing mechanism of TCC for Zn2+ was illustrated to be a chelation-enhanced fluorescence process through spectroscopic experiments and theoretical calculations.

Dual-channel recognition of Al3+ and Cu2+ ions using a chiral pyrene-based fluorescent sensor

Specific recognition between Al3+ and Cu2+ has been achieved based on the new mechanism of Cu2+ detection by pyrene dimerization.

A chalcone-based fluorescent chemosensor for detecting Mg2+ and Cd2

SBOD (sodium (E)-2-(3-[5-bromothiophen-2-yl]-3-oxoprop-1-en-1-yl)-4,6-dichlorophenolate) was designed and synthesized as a chalcone-based fluorescent turn-on chemosensor for Mg²⁺ and Cd²⁺ . SBOD selectively detected Mg²⁺ and Cd²⁺ through the increase in effective fluorescence. Detection limits of SBOD for Mg²⁺ and Cd²⁺ were calculated to be 3.8 μM and 2.9 μM, respectively. The binding modes of SBOD for Mg²⁺ and Cd²⁺ were determined to be 1:1 by ESI-MS and Job plot. Association mechanisms for SBOD to Mg²⁺ and Cd²⁺ were illustrated by ESI-MS, UV-vis, fluorescence spectroscopy, and calculations.

Amidine- and Amidoxime-Substituted Heterocycles: Synthesis, Antiproliferative Evaluations and DNA Binding

The novel 1,2,3-triazolyl-appended N- and O-heterocycles containing amidine 4–11 and amidoxime 12–22 moiety were prepared and evaluated for their antiproliferative activities in vitro. Among the series of amidine-substituted heterocycles, aromatic diamidine 5 and coumarine amidine 11 had the most potent growth-inhibitory effect on cervical carcinoma (HeLa), hepatocellular carcinoma (HepG2) and colorectal adenocarcinoma (SW620), with IC₅₀ values in the nM range. Although compound 5 was toxic to non-tumor HFF cells, compound 11 showed certain selectivity. From the amidoxime series, quinoline amidoximes 18 and 20 showed antiproliferative effects on lung adenocarcinoma (A549), HeLa and SW620 cells emphasizing compound 20 that exhibited no cytostatic effect on normal HFF fibroblasts. Results of CD titrations and thermal melting experiments indicated that compounds 5 and 10 most likely bind inside the minor groove of AT-DNA and intercalate into AU-RNA. Compounds 6, 9 and 11 bind to AT-DNA with mixed binding mode, most probably minor groove binding accompanied with aggregate binding along the DNA backbone.

An Acylhydrazone-Based Fluorescent Sensor for Sequential Recognition of Al3+ and H2PO4. MATERIALS (BASEL, SWITZERLAND) 2021;14:6392. [PMID: 34771920 PMCID: PMC8585233 DOI: 10.3390/ma14216392]

A novel acylhydrazone-based fluorescent sensor NATB was designed and synthesized for consecutive sensing of Al3+ and H2PO4-. NATB displayed fluorometric sensing to Al3+ and could sequentially detect H2PO4- by fluorescence quenching. The limits of detection for Al3+ and H2PO4- were determined to be 0.83 and 1.7 μM, respectively. The binding ratios of NATB to Al3+ and NATB-Al3+ to H2PO4- were found to be 1:1. The sequential recognition of Al3+ and H2PO4- by NATB could be repeated consecutively. In addition, the practicality of NATB was confirmed with the application of test strips. The sensing mechanisms of Al3+ and H2PO4- by NATB were investigated through fluorescence and UV-Visible spectroscopy, Job plot, ESI-MS, 1H NMR titration, and DFT calculations.

A bio-compatible pyridine-pyrazole hydrazide based compartmental receptor for Al3+ sensing and its application in cell imaging

For practical applications, the development of bio-compatible organic molecules as p-block ion chemosensors is critical. Herein, we report the single crystal (SC) of new pyridine-pyrazole derived Al³⁺ sensor H2PPC [(Z)-N'-(2,3-dihydroxybenzylidene)-5-methyl-1-(pyridin-2-yl)-1H-pyrazole-3-carbohydrazide] as well as its Cu-complex SC. The probe exhibits an "off-on" fluorescence response towards Al³⁺ ions, and this has been modulated with different solvents. For selective detection of Al³⁺ ions, a special coordination pocket in the structural backbone is advantageous. The chemosensor exhibits a submicromolar detection level (LOD = 4.78 μM) for Al³⁺. The density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations of H2PPC and [Al(HPP)2]+ (1) reveal that a change of the structural conformation of probe H2PPC upon complexation causes the pyrazole and pyridine units to create a specific cavity to tether Al³⁺, and consequently H2PPC proves to be a promising molecule for Al³⁺ detection. Furthermore, the probe has been successfully used to evaluate Al³⁺ as a low-cost kit using filter paper strips, and the in situ Al³⁺ ion imaging in Vero cells as well as A549 cell lines shows the sensor's nuclear envelope penetrability, indicating that it has great potential for biological and environmental applications.

An Indole-Based Fluorescent Chemosensor for Detecting Zn2+ in Aqueous Media and Zebrafish

An indole-based fluorescent chemosensor IH-Sal was synthesized to detect Zn²⁺. IH-Sal displayed a marked fluorescence increment with Zn²⁺. The detection limit (0.41 μM) of IH-Sal for Zn²⁺ was greatly below that suggested by the World Health Organization. IH-Sal can quantify Zn²⁺ in real water samples. More significantly, IH-Sal could determine and depict the presence of Zn²⁺ in zebrafish. The detecting mechanism of IH-Sal toward Zn²⁺ was illustrated by fluorescence and UV–visible spectroscopy, DFT calculations, ¹H NMR titration and ESI mass.

Discriminatory behavior of a rhodamine 6G decorated mesoporous silica based multiple cation sensor towards Cu2+ and Hg2+vis-à-vis Al3+, Cr3+ and Fe3+: selective removal of Cu2+ and Hg2+ from aqueous media

Selective identification of metal ions as well as their removal is possible when a sensing unit is anchored to a solid support. In this paper, functionalized mesoporous silica with a pendant rhodamine 6G moiety (R6FMS) has been obtained by successive grafting of an aldehyde derivative of bisphenol A followed by rhodamine 6G over a 3-aminopropyl anchored mesoporous silica framework. The materials have been characterized by powder X-ray diffraction, nitrogen sorption and electron microscopy studies, FT-IR and solid state MAS NMR spectral studies, and thermal analysis. In ethanol, the colorless silica material gives pink coloration in the presence of Al3+, Cr3+, Fe3+ and Cu2+ which is also clearly evident from the generation of an absorption peak at 525 nm. Upon excitation at 500 nm, the fluorescence intensity of the probe increases by 36-, 17-, 40- and 89-fold in the presence of Al3+, Cr3+, Fe3+ and Cu2+ ions, respectively. This suggests that R6FMS is a colorimetric and fluorescent chemosensor for these cations in ethanol. However, when the solvent is changed from ethanol to water, it becomes a selective chemosensor only for Cu2+ and Hg2+, by the generation of a pink color and strong fluorescence at ca. 550 nm, thereby discriminating the trivalent cations. Cations induce the opening of the spirolactam ring resulting in pink coloration and strong fluorescence. The quantum yield and lifetime of the probe have been increased considerably in the presence of these cations in ethanol as well as in aqueous media. The detection limit values for these cations range from 10-6 to 10-8 M. R6FMS has been used to remove Hg2+ and Cu2+ from their aqueous solution with a maximum adsorption capacity of 35 mg g-1 and 148 mg g-1 for Cu2+ and Hg2+, respectively.

Porous Anionic Co(II) Metal-Organic Framework, with a High Density of Amino Groups, as a Superior Luminescent Sensor for Turn-on Al(III) Detection

Accumulation of high concentrations of Al(III) in body has a direct impact on health and therefore, the trace detection of Al(III) has been a matter for substantial concern. An anionic metal organic framework ({[Me₂ NH₂ ]_0.5 [Co(DATRz)_0.5 (NH₂ BDC)] ⋅ xG}_n ; 1; HDATRz=3,5-diamino-1,2,4-triazole, H₂ NH₂ -BDC=2-amino-1,4-benzenedicarboxylic acid, G=guest molecule) composed of two types of secondary building units (SBU) and channels of varying sizes was synthesized by employing a rational design mixed ligand synthesis approach. Free -NH₂ groups on both the ligands are immobilized onto the pore surface of the MOF which acts as a superior luminescent sensor for turn-on Al(III) detection. Furthermore, the large channels could allow the counter-ions to pass through and get exchanged to selectively detect Al(III) in presence of other seventeen metal ions with magnificent luminescence enhancement. The observed limit of detection is as low as 17.5 ppb, which is the lowest among the MOF-based sensors achieved so far. To make this detection approach simple, portable and economic, we demonstrate MOF filter paper test for real time naked eye observation.

A naphthyl thiourea-based effective chemosensor for fluorescence detection of Ag+ and Zn2

A naphthyl thiourea-based effective chemosensor HNC, (E)-2-(2-hydroxy-3-methoxybenzylidene)-N-(naphthalen-1-yl)hydrazine-1-carbothioamide, was synthesized. HNC showed quick responses toward Ag⁺ and Zn²⁺ through marked fluorescence turn-on in different solvent conditions, respectively. Binding proportions of HNC to Ag⁺ and Zn²⁺ were found to be 2:1 and 1:1, respectively. Detection limits of HNC for Ag⁺ and Zn²⁺ were calculated as 3.82 and 0.21 μM. Binding processes of HNC for Ag⁺ and Zn²⁺ were represented using Job's plot, DFT, ¹ H NMR titration, and ESI-MS.

A Diverse Micromorphology of Photonic Crystal Chips for Multianalyte Sensing

The diversity by nano/microstructural material or device constructing can provide the exciting opportunity for sensitivity and selectivity to achieve facile and efficient multianalyte recognition for clinical diagnosis, environment monitoring, etc., in complex system analysis. Colloidal poly(styrene-methyl methacrylate-acrylic acid) (poly(St-MMA-AA)) nanoparticle-assembled photonic crystals (PCs) can achieve manipulative 3D structural colors and approach PC sensor chip for high-efficient multianalysis utilizing simple dye. Focusing on the morphology effects of structural color, a PC microchip is designed and constructed with various geometrical micromorphologies. Based on the angle dependence of colloidal-crystal structural color, the stopband distribution is explored on various morphological PC pixels. Selective fluorescent enhancement is realized for stopband-matched PCs, which approach the successful discrimination of metal ions and complex multianalysis of groundwater. Meanwhile, printed droplet-shaping manipulation can achieve a large-scale structural-color sensor array of chips with designable nano/microstructures via colloidal assembly. It will be the critical puzzle piece between macromorphology and microstructure for the structural-color researches.

Designed Synthesis of Fluorescence 'Turn-on' Dual Sensor for Selective Detection of Al3+ and Zn2+ in Water

1-(Pyridin-2-yl-hydrazonomethyl)-naphthalen-2-ol (PNOH) is a naphthalene-based fluorescence dual chemo-sensor for Al³⁺ and Zn²⁺. The probe (PNOH) is spectroscopically characterised and the chemo-sensing mechanism has been demonstrated through ¹H NMR, absorption and both steady state and time resolved fluorescence study. The 'turn-on' luminescence property of PNOH is used for the selective detection of trace amount of Al³⁺and Zn²⁺via chelation enhanced fluorescence (CHEF) through complex formation. The 1:1 stoichiometry of each sensor-metal complex is observed from Job's plot based on UV-Vis titration. Most promising advantage of the probe (PNOH) is its application in the one-pot detection of Al³⁺ (λem- 460 nm) and Zn²⁺ (λ_em- 510 nm) exciting at same wavelength (λ_ex- 420 nm) while high intense emission appears at two different wavelengths. Limit of detection (LOD) of PNOH towards Al³⁺ & Zn²⁺ are found to be 60 nM & 365 nM respectively. Real water sample analysis has also been demonstrated by using the probe PNOH.

Active Bromoaniline-Aldehyde Conjugate Systems and Their Complexes as Versatile Sensors of Multiple Cations with Logic Formulation and Efficient DNA/HSA-Binding Efficacy: Combined Experimental and Theoretical Approach

Two fluorescence active bromoaniline-based Schiff base chemosensors, namely, (E)-4-bromo-2-(((4-bromophenyl)imino)methyl)phenol (HL1 ) and (E)-2-(((4-bromophenyl)imino)methyl)phenol (HL2 ), have been employed for the selective and notable detection of Cu2+ and Zn2+ ions, respectively, with the simultaneous formation of two new metal complexes [Cu(L1)2] (1) and [Zn(L2)2] (2). X-ray single crystal analyses indicate that complexes 1 and 2 are tetra-coordinated systems with substantial CH...π/π...π stacking interactions in the solid-state crystal structures. These two complexes are exploited for the next step detection of Al3+ and Hg2+ where complex 2 exhibits impressive results via turn-off fluorescence quenching in (DMSO/H2O) HEPES buffer medium. The sensing phenomena are optimized by UV-vis spectral analyses as well as theoretical calculations (density functional theory and time-dependent density functional theory). The combined detection phenomena of the ligand (HL2 ) and complex 2 are exclusively utilized for the first time to construct a molecular memory device, intensifying their multisensoric properties. Furthermore, the DNA- and human serum albumin (HSA)-binding efficacies of these two complexes are examined by adopting electronic and fluorometric titration methods. Complex 2 shows a higher DNA-binding ability in comparison with complex 1, whereas in the case of HSA, the reverse situation is observed. Finally, the binding modes of both the complexes with DNA and HSA have been investigated through molecular docking studies, suggesting good agreement with the experimental results.

A Cd(ii) and Zn(ii) selective naphthyl based [2]rotaxane acts as an exclusive Zn(ii) sensor upon further functionalization with pyrene

A new multi-functional [2]rotaxane, ROTX, has been synthesized via a Cu(i) catalysed azide-alkyne cycloaddition reaction between Ni(ii) templated azide terminated pseudorotaxane composed of a naphthalene based heteroditopic wheel, NaphMC, and an alkyne terminated stopper. Subsequently, ROTX has been functionalized with pyrene moieties to develop a bifluorophoric [2]rotaxane, PYROTX, having naphthalene and pyrene moieties. Detailed characterization of these two rotaxanes is performed by utilizing several techniques such as ESI-MS, (1D and 2D) NMR, UV/Vis and PL studies. Comparative metal ion sensing studies of NaphMC (a fluorophoric cyclic receptor), ROTX ([2]rotaxane with a naphthyl fluorophore) and PYROTX ([2]rotaxane having naphthyl and pyrene fluorophores) have been performed to determine the effect of dimensionality/functionalization on the metal ion selectivity. Although NaphMC fails to discriminate between metal ions, ROTX serves as a selective sensor for Zn(ii) and Cd(ii). Importantly, PYROTX shows exclusive selectivity towards Zn(ii) over various transition, alkali and alkaline earth metal ions including Cd(ii).

An antipyrine based fluorescent probe for distinct detection of Al3+ and Zn2+ and its AIEE behaviour

A simple antipyrine based fluorescent probe, 4-[(2-hydroxy-3-methoxy-benzylidene)-amino]-1,5-dimethyl-2-phenyl-1,2-dihydro-pyrazol-3-one (OVAP), has been successfully synthesized using a one-step condensation method. It exhibits dual sensing properties toward Al3+ and Zn2+ in the presence of other relevant metal ions and also displays novel aggregation induced emission enhancement (AIEE) characteristics in its aggregated/solid state. Aggregated OVAP microstructures with interesting morphologies have been synthesized using SDS as a morphology directing agent. Morphologies of the particles are characterized using optical microscopy. Photophysical properties of the as-synthesized OVAP hydrosol are studied using UV-Vis absorption, steady state and time resolved fluorescence spectroscopy. The 'turn on' luminescence property of OVAP is used for the selective detection of trace amounts of Al3+ and Zn2+ and a significant turn on fluorescence enhancement over ∼100-fold is triggered via chelation-enhanced fluorescence (CHEF) through complex formation. The 1 : 1 stoichiometry of each sensor metal ion complex is observed from Job's plot based on UV-Vis absorption titration. The LODs for Al3+ and Zn2+ are found to be 1.05 nM and 2.35 nM, respectively. Notably, the sensor, OVAP, is further demonstrated using a molecular INHIBIT logic gate.