Reactive capture and electrochemical conversion of CO2 with ionic liquids and deep eutectic solvents

Ionic liquids (ILs) and deep eutectic solvents (DESs) have tremendous potential for reactive capture and conversion (RCC) of CO2 due to their wide electrochemical stability window, low volatility, and high CO2 solubility. There is environmental and economic interest in the direct utilization of the captured CO2 using electrified and modular processes that forgo the thermal- or pressure-swing regeneration steps to concentrate CO2, eliminating the need to compress, transport, or store the gas. The conventional electrochemical conversion of CO2 with aqueous electrolytes presents limited CO2 solubility and high energy requirement to achieve industrially relevant products. Additionally, aqueous systems have competitive hydrogen evolution. In the past decade, there has been significant progress toward the design of ILs and DESs, and their composites to separate CO2 from dilute streams. In parallel, but not necessarily in synergy, there have been studies focused on a few select ILs and DESs for electrochemical reduction of CO2, often diluting them with aqueous or non-aqueous solvents. The resulting electrode-electrolyte interfaces present a complex speciation for RCC. In this review, we describe how the ILs and DESs are tuned for RCC and specifically address the CO2 chemisorption and electroreduction mechanisms. Critical bulk and interfacial properties of ILs and DESs are discussed in the context of RCC, and the potential of these electrolytes are presented through a techno-economic evaluation.

Recent progress on nickel phthalocyanine-based electrocatalysts for CO2 reduction

The electrocatalytic reduction of CO2 to high-value fuels by renewable electricity is a sustainable strategy, which can substitute for fossil fuels and circumvent climate changes induced by elevated CO2 emission levels, making the rational design of versatile electrocatalysts highly desirable. Among all the electrocatalytic materials used in the CO2 reduction reaction, nickel phthalocyanine (NiPc)-based electrocatalysts have attracted considerable attention recently because of their high CO selectivity and catalytic activity. Herein, we review the latest advances in CO2 electroreduction to CO catalyzed by immobilized NiPc and its derivatives on diverse surfaces. Specific strategies, the structure-performance relationship and the CO2-to-CO reaction mechanism of these NiPc-based electrocatalysts are analyzed. Future opportunities and challenges for this series of powerful heterogeneous electrocatalysts are also highlighted.

Strategies for Enhancing the Photocatalytic and Electrocatalytic Efficiency of Covalent Triazine Frameworks for CO2 Reduction

Converting carbon dioxide (CO2) into fuel and high-value-added chemicals is considered a green and effective way to solve global energy and environmental problems. Covalent triazine frameworks (CTFs) are extensively utilized as an emerging catalyst for photo/electrocatalytic CO2 reduction reaction (CO2RR) recently recognized for their distinctive qualities, including excellent thermal and chemical stability, π-conjugated structure, rich nitrogen content, and a strong affinity for CO2, etc. Nevertheless, single-component CTFs have the problems of accelerated recombination of photoexcited electron-hole pairs and restricted conductivity, which limit their application for photo/electrocatalytic CO2RR. Therefore, emphasis will then summarize the strategies for enhancing the photocatalytic and electrocatalytic efficiency of CTFs for CO2RR in this paper, including atom doping, constructing a heterojunction structure, etc. This review first illustrates the synthesis strategies of CTFs and the advantages of CTFs in the field of photo/electrocatalytic CO2RR. Subsequently, the mechanism of CTF-based materials in photo/electrocatalytic CO2RR is described. Lastly, the challenges and future prospects of CTFs in photo/electrocatalytic CO2RR are addressed, which offers a fresh perspective for the future development of CTFs in photo/electrocatalytic CO2RR.

Conjugated Microporous Polymers for Catalytic CO2 Conversion

Rising carbon dioxide (CO2) levels in the atmosphere are recognized as a threat to atmospheric stability and life. Although this greenhouse gas is being produced on a large scale, there are solutions to reduction and indeed utilization of the gas. Many of these solutions involve costly or unstable technologies, such as air-sensitive metal-organic frameworks (MOFs) for CO2 capture or "non-green" systems such as amine scrubbing. Conjugated microporous polymers (CMPs) represent a simpler, cheaper, and greener solution to CO2 capture and utilization. They are often easy to synthesize at scale (a one pot reaction in many cases), chemically and thermally stable (especially in comparison with their MOF and covalent organic framework (COF) counterparts, owing to their amorphous nature), and, as a result, cheap to manufacture. Furthermore, their large surface areas, tunable porous frameworks and chemical structures mean they are reported as highly efficient CO2 capture motifs. In addition, they provide a dual pathway to utilize captured CO2 via chemical conversion or electrochemical reduction into industrially valuable products. Recent studies show that all these attractive properties can be realized in metal-free CMPs, presenting a truly green option. The promising results in these two fields of CMP applications are reviewed and explored here.

Alumina-Magnesia-Supported Ni for Hydrogen Production via the Dry Reforming of Methane: A Cost-Effective Catalyst System

5Ni/MgO and 5Ni/γAl2O3 are pronounced in the line of cheap catalyst systems for the dry reforming of methane. However, the lower reducibility of 5Ni/MgO and the significant coke deposition over 5Ni/γAl2O3 limit their applicability as potential DRM catalysts. The mixing capacity of MgO and Al2O3 may overcome these limitations without increasing the catalyst cost. Herein, a 5Ni/xMg(100 - x)Al (x = 0, 20, 30, 60, 70, and 100 wt. %) catalyst system is prepared, investigated, and characterized with X-ray diffraction, surface area and porosity measurements, H2-temperature programmed reduction, UV-Vis-IR spectroscopy, Raman spectroscopy, thermogravimetry, and transmission electron microscopy. Upon the addition of 20 wt. % MgO into the Al2O3 support, 5Ni/20Mg80Al is expanded and carries both stable Ni sites (derived through the reduction of NiAl2O4) and a variety of CO2-interacting species. CH4 decomposition at Ni sites and the potential oxidation of carbon deposits by CO2-interacting species over 5Ni/20Mg80Al results in a higher 61% H2-yield (against ~55% H2-yield over 5Ni/γAl2O3) with an excellent carbon-resistant property. In the major magnesia support system, the 5Ni/60Mg40Al catalyst carries stable Ni sites derived from MgNiO2 and "strongly interacted NiO-species". The H2-yield over the 5Ni/60Mg40Al catalyst moves to 71%, even against a high coke deposition, indicating fine tuning between the carbon formation and diffusion rates. Ni dispersed over magnesia-alumina with weight ratios of 7/3 and 3/7 exhibit good resistance to coke. Weight ratios of 2/8 and 7/3 contain an adequate amount of reducible and CO2-interactive species responsible for producing over 60% of H2-yield. Weight ratio 6/4 has a proper coke diffusion mechanism in addition to achieving a maximum of 71% H2-yield.

Theoretical Prediction of Electrocatalytic Reduction of CO2 Using a 2D Catalyst Composed of 3 d Transition Metal and Hexaamine Dipyrazino Quinoxaline

Transition metals and organic ligands combine to form metal-organic frameworks (MOFs), which possess distinct active sites, large specific surface areas and stable porous structures, giving them considerable promise for CO2 reduction electrocatalysis. In the present study, using spin polarisation density-functional theory, a series of 2D MOFs constructed from 3d transition metal and hexamethylene dipyrazoline quinoxaline(HADQ) were investigated. The calculated binding energies between HADQ and metal atoms for the ten TM-HADQ monolayers were strong sufficient to stably disperse the metal atoms in the HADQ monolayers. Of the ten catalysts tested, seven (Sc, Ni, Cu, Zn, Ti, V and Cr) exhibited high CO2 reduction selectivity, while Mn, Fe and Co required pH values above 2.350, 6.461 and 6.363, respectively, to exhibit CO2 reduction selectivity. HCOOH was the most important producer for Sc, Zn, Ni and Mn, while CH4 was the main producer for Ti, Cr, Fe and V. Cu and Co were less selective, producing HCHO, CH3 OH, and CH4 simultaneously at the same rate-determining step and limiting potential. The Cu-HADQ catalyst had a high overpotential for the HCHO product (1.022 V), while the other catalysts had lower overpotentials between 0.016 V and 0.792 V. Thus, these results predict TM-HADQ to show excellent activity in CO2 electrocatalytic reduction and to become a promising electrocatalyst for CO2 reduction.

Fundamental Limitation in Electrochemical Methane Oxidation to Alcohol: A Review and Theoretical Perspective on Overcoming It

The direct conversion of gaseous methane to energy-dense liquid derivatives such as methanol and ethanol is of profound importance for the more efficient utilization of natural gas. However, the thermo-catalytic partial oxidation of this simple alkane has been a significant challenge due to the high C-H bond energy. Exploiting electrocatalysis for methane activation via active oxygen species generated on the catalyst surface through electrochemical water oxidation is generally considered as economically viable and environmentally benign compared to energy-intensive thermo-catalysis. Despite recent progress in electrochemical methane oxidation to alcohol, the competing oxygen evolution reaction (OER) still impedes achieving high faradaic efficiency and product selectivity. In this review, an overview of current progress in electrochemical methane oxidation, focusing on mechanistic insights on methane activation, catalyst design principles based on descriptors, and the effect of reaction conditions on catalytic performance are provided. Mechanistic requirements for high methanol selectivity, and limitations of using water as the oxidant are discussed, and present the perspective on how to overcome these limitations by employing carbonate ions as the oxidant.

A Quantitative Analysis of Electrochemical CO2 Reduction on Copper in Organic Amide and Nitrile-Based Electrolytes

Aqueous electrolytes used in CO₂ electroreduction typically have a CO₂ solubility of around 34 mM under ambient conditions, contributing to mass transfer limitations in the system. Non-aqueous electrolytes exhibit higher CO₂ solubility (by 5-8-fold) and also provide possibilities to suppress the undesired hydrogen evolution reaction (HER). On the other hand, a proton donor is needed to produce many of the products commonly obtained with aqueous electrolytes. This work investigates the electrochemical CO₂ reduction performance of copper in non-aqueous electrolytes based on dimethylformamide (DMF), n-methyl-2-pyrrolidone (NMP), and acetonitrile (ACN). The main objective is to analyze whether non-aqueous electrolytes are a viable alternative to aqueous electrolytes for hydrocarbon production. Additionally, the effects of aqueous/non-aqueous anolytes, membrane, and the selection of a potential window on the electrochemical CO₂ reduction performance are addressed in this study. Experiments with pure DMF and NMP mainly produced oxalate with a faradaic efficiency (FE) reaching >80%; however, pure ACN mainly produced hydrogen and formate due to the presence of more residual water in the system. Addition of 5% (v/v) water to the non-aqueous electrolytes resulted in increased HER and formate production with negligible hydrocarbon production. Hence, we conclude that aqueous electrolytes remain a better choice for the production of hydrocarbons and alcohols on a copper electrode, while organic electrolytes based on DMF and NMP can be used to obtain a high selectivity toward oxalate and formate.

MOF-derived transition metal-based catalysts for the electrochemical reduction of CO2 to CO: a mini review

The excessive emission of CO₂ derived from the consumption of fossil fuels has caused severe energy and environmental crises. The electrochemical reduction of CO₂ into value-added products such as CO not only reduces the CO₂ concentration in the atmosphere but also promotes sustainable development in chemical engineering. Thus, tremendous work has been devoted to developing highly efficient catalysts for the selective CO₂ reduction reaction (CO₂RR). Recently, MOF-derived transition metal-based catalysts have shown great potential for the CO₂RR due to their various compositions, adjustable structures, competitive ability, and acceptable cost. Herein, based on our work, a mini-review is proposed for an MOF-derived transition metal-based catalyst for the electrochemical reduction of CO₂ to CO. The catalytic mechanism of the CO₂RR was first introduced, and then we summarized and analyzed the MOF-derived transition metal-based catalysts in terms of MOF-derived single atomic metal-based catalysts and MOF-derived metal nanoparticle-based catalysts. Finally, we present the challenges and perspectives for the subject topic. Hopefully, this review could be helpful and instructive for the design and application of MOF-derived transition metal-based catalysts for the selective CO₂RR to CO.

Copper-based catalysts for the electrochemical reduction of carbon dioxide: progress and future prospects

There is an urgent need for the development of high performance electrocatalysts for the CO₂ reduction reaction (CO₂RR) to address environmental issues such as global warming and achieve carbon neutral energy systems. In recent years, Cu-based electrocatalysts have attracted significant attention in this regard. The present review introduces fundamental aspects of the electrocatalytic CO₂RR process together with a systematic examination of recent developments in Cu-based electrocatalysts for the electroreduction of CO₂ to various high-value multicarbon products. Current challenges and future trends in the development of advanced Cu-based CO₂RR electrocatalysts providing high activity and selectivity are also discussed.

Nanostructure Engineering of Sn-Based Catalysts for Efficient Electrochemical CO2 Reduction

Excessive anthropogenic CO₂ emission has caused a series of ecological and environmental issues, which threatens mankind's sustainable development. Mimicking the natural photosynthesis process (i.e., artificial photosynthesis) by electrochemically converting CO₂ into value-added products is a promising way to alleviate CO₂ emission and relieve the dependence on fossil fuels. Recently, Sn-based catalysts have attracted increasing research attentions due to the merits of low price, abundance, non-toxicity, and environmental benignancy. In this review, the paradigm of nanostructure engineering for efficient electrochemical CO₂ reduction (ECO₂ R) on Sn-based catalysts is systematically summarized. First, the nanostructure engineering of size, composition, atomic structure, morphology, defect, surficial modification, catalyst/substrate interface, and single-atom structure, are systematically discussed. The influence of nanostructure engineering on the electronic structure and adsorption property of intermediates, as well as the performance of Sn-based catalysts for ECO₂ R are highlighted. Second, the potential chemical state changes and the role of surface hydroxides on Sn-based catalysts during ECO₂ R are introduced. Third, the challenges and opportunities of Sn-based catalysts for ECO₂ R are proposed. It is expected that this review inspires the further development of highly efficient Sn-based catalysts, meanwhile offer protocols for the investigation of Sn-based catalysts.

Electrochemical Reduction of Gaseous CO2 at Low-Intermediate Temperatures Using a Solid Acid Membrane Cell

In this study, the electrochemical reduction of gaseous carbon dioxide (CO2) at low-intermediate temperatures (~250 °C) using a solid acid membrane cell was demonstrated, for the first time. Compared to solid oxide fuel cells, which operate at higher temperatures (>600 °C), this system can utilize the advantage of gaseous CO2 reduction, while being considerably more simply implemented. A Cu-based electrocatalyst was developed as a cathode side catalyst for electrochemical reduction of gaseous CO2 and specifically demonstrated its efficacy to produce hydrocarbons and liquid fuels. The result is significant in terms of resolving the challenges associated with producing hydrocarbons and liquid fuels from CO2 reduction. The present study introduced the novel system with the solid acid membrane cell and the Cu-based catalyst for electrochemically reducing gaseous CO2. This system showed a new possibility for electrochemical reduction of gaseous CO2, as it operates at lower temperatures, produces hydrocarbons and liquid fuels and has plenty of room for improvement.

Current state of copper-based bimetallic materials for electrochemical CO2 reduction: a review

The increasing CO2 concentration in the atmosphere has caused profound environmental issues such as global warming. The use of CO2 as a feedstock to replace traditional fossil sources holds great promise to reduce CO2 emissions. The electrochemical conversion of CO2 has attracted much attention because it can be powered by renewable sources such as solar energy. In this review article, we provide insight into the important parameters when studying CO2RR and give a comprehensive review on the description of synthesis methods with electrocatalytic CO2 reduction over bimetallic copper-based materials. Due to the important bibliographic data on Cu bimetallic materials, we have limited this review to Sn, In, Pd, Zn and Ag. At the end of this review, challenges and perspectives for further upgrading have been included to briefly highlight the important future considerations of this rapidly growing technology.

High Throughput Preparation of Ag-Zn Alloy Thin Films for the Electrocatalytic Reduction of CO2 to CO

Ag-Zn alloys are identified as highly active and selective electrocatalysts for CO₂ reduction reaction (CO₂RR), while how the phase composition of the alloy affects the catalytic performances has not been systematically studied yet. In this study, we fabricated a series of Ag-Zn alloy catalysts by magnetron co-sputtering and further explored their activity and selectivity towards CO₂ electroreduction in an aqueous KHCO₃ electrolyte. The different Ag-Zn alloys involve one or more phases of Ag, AgZn, Ag₅Zn₈, AgZn_3, and Zn. For all the catalysts, CO is the main product, likely due to the weak CO binding energy on the catalyst surface. The Ag₅Zn₈ and AgZn₃ catalysts show a higher CO selectivity than that of pure Zn due to the synergistic effect of Ag and Zn, while the pure Ag catalyst exhibits the highest CO selectivity. Zn alloying improves the catalytic activity and reaction kinetics of CO₂RR, and the AgZn₃ catalyst shows the highest apparent electrocatalytic activity. This work found that the activity and selectivity of CO₂RR are highly dependent on the element concentrations and phase compositions, which is inspiring to explore Ag-Zn alloy catalysts with promising CO₂RR properties.

Design of Amine-Modified Zr-Mg Mixed Oxide Aerogel Nanoarchitectonics with Dual Lewis Acidic and Basic Sites for CO2/Propylene Oxide Cycloaddition Reactions

The utilization of CO₂ attracts much research attention because of global warming. The CO₂/epoxide cycloaddition reaction is one technique of CO₂ utilization. However, homogeneous catalysts with both Lewis acidic and basic and toxic solvents, such as DMF, are needed in the CO₂/epoxide cycloaddition reaction. As a result, this study focuses on the development of heterogeneous catalysts with both Lewis acidic and basic sites for the CO₂ utilization of the CO₂/epoxide cycloaddition reactions without the addition of a DMF toxic solvent. For the first time, the Zr-Mg mixed oxide aerogels with Lewis acidic and basic sites are synthesized for the CO₂/propylene oxide (PO) cycloaddition reactions. To further increase the basic sites, 3-Aminopropyl trimethoxysilane (APTMS) with -NH₂ functional group is successfully grafted on the Zr-Mg mixed oxide aerogels. The results indicate that the highest yield of propylene carbonate (PC) is 93.1% using the as-developed APTMS-modified Zr-Mg mixed oxide aerogels. The as-prepared APTMS-modified Zr-Mg mixed oxide aerogels are great potential in industrial plants for CO₂ reduction in the future.

Solubilities and Transport Properties of CO2, Oxalic Acid, and Formic Acid in Mixed Solvents Composed of Deep Eutectic Solvents, Methanol, and Propylene Carbonate

Recently, deep eutectic solvents (DES) have been considered as possible electrolytes for the electrochemical reduction of CO₂ to value-added products such as formic and oxalic acids. The applicability of pure DES as electrolytes is hindered by high viscosities. Mixtures of DES with organic solvents can be a promising way of designing superior electrolytes by exploiting the advantages of each solvent type. In this study, densities, viscosities, diffusivities, and ionic conductivities of mixed solvents comprising DES (i.e., reline and ethaline), methanol, and propylene carbonate were computed using molecular simulations. To provide a quantitative assessment of the affinity and mass transport of CO₂ and oxalic and formic acids in the mixed solvents, the solubilities and self-diffusivities of these solutes were also computed. Our results show that the addition of DES to the organic solvents enhances the solubilities of oxalic and formic acids, while the solubility of CO₂ in the ethaline-containing mixtures are in the same order of magnitude with the respective pure organic components. A monotonic increase in the densities and viscosities of the mixed solvents is observed as the mole fraction of DES in the mixture increases, with the exception of the density of ethaline-propylene carbonate which shows the opposite behavior due to the high viscosity of the pure organic component. The self-diffusivities of all species in the mixtures significantly decrease as the mole fraction of DES approaches unity. Similarly, the self-diffusivities of the dissolved CO₂ and the oxalic and formic acids also decrease by at least 1 order of magnitude as the composition of the mixture shifts from the pure organic component to pure DES. The computed ionic conductivities of all mixed solvents show a maximum value for mole fractions of DES in the range from 0.2 to 0.6 and decrease as more DES is added to the mixtures. Since for most mixtures studied here no prior experimental measurements exist, our findings can serve as a first data set based on which further investigation of DES-containing electrolyte solutions can be performed for the electrochemical reduction of CO₂ to useful chemicals.

CO2 to Methanol: A Highly Efficient Enzyme Cascade

Carbon dioxide (CO₂) has been increasingly regarded not only as a greenhouse gas but also as a valuable feedstock for carbon-based chemicals. In particular, biological approaches have drawn attention as models for the production of value-added products, as CO₂ conversion serves many natural processes. Enzymatic CO₂ reduction in vitro is a very promising route to produce fossil free and bio-based fuel alternatives, such as methanol. In this chapter, the advances in constructing competitive multi-enzymatic systems for the reduction of CO₂ to methanol are discussed. Different integrated methods are presented, aiming to address technological challenges, such as the cost effectiveness, need for material regeneration and reuse and improving product yields of the process.

Recent Development of Electrocatalytic CO2 Reduction Application to Energy Conversion

Carbon dioxide (CO₂ ) emission has caused greenhouse gas pollution worldwide. Hence, strengthening CO₂ recycling is necessary. CO₂ electroreduction reaction (CRR) is recognized as a promising approach to utilize waste CO₂ . Electrocatalysts in the CRR process play a critical role in determining the selectivity and activity of CRR. Different types of electrocatalysts are introduced in this review: noble metals and their derived compounds, transition metals and their derived compounds, organic polymer, and carbon-based materials, as well as their major products, Faradaic efficiency, current density, and onset potential. Furthermore, this paper overviews the recent progress of the following two major applications of CRR according to the different energy conversion methods: electricity generation and formation of valuable carbonaceous products. Considering electricity generation devices, the electrochemical properties of metal-CO₂ batteries, including Li-CO₂ , Na-CO₂ , Al-CO₂ , and Zn-CO₂ batteries, are mainly summarized. Finally, different pathways of CO₂ electroreduction to carbon-based fuels is presented, and their reaction mechanisms are illustrated. This review provides a clear and innovative insight into the entire reaction process of CRR, guiding the new electrocatalysts design, state-of-the-art analysis technique application, and reaction system innovation.

Recent advances in low-temperature electrochemical conversion of carbon dioxide

Since the onset of the industrial revolution, fossil fuels have been the primary source of energy generation, and the continued exploitation of fossil fuels has led to an increase in the amount of atmospheric carbon dioxide. A lot of research currently focuses much on decreasing dependence on fossil fuels by replacing them with green energy. However, this technique poses a number of challenges, such as the need for improved infrastructure and technology and the high market penetration of renewable energy technologies. Capturing and converting carbon dioxide using electrochemical approaches can help to stabilize atmospheric greenhouse gas levels and create a positive future for the transformation of carbon dioxide into a number of value-added products. The conversion of carbon dioxide via electrochemical approach is a major challenge, and consideration must be given to the development and production of low-cost, stable, and highly efficient electrocatalysts. Hence, this review presents an overview of the current developments in the electrochemical conversion of carbon dioxide. In addition, this study discusses the current progress of electrocatalysts, in particular, the homogeneous and heterogeneous catalyst, which has a high level of activity and selectivity of low overpotential preferred products. The overview of the mechanisms and kinetics of the carbon dioxide reduction using the computational method are also addressed.

Strategies for Improved Electrochemical CO2 Reduction to Value-added Products by Highly Anticipated Copper-based Nanoarchitectures

Uncontrolled CO₂ emission from various industrial and domestic sources is a considerable threat to environmental sustainability. Scientists are trying to develop multiple approaches to not only reduce CO₂ emissions but also utilize this potent pollutant to get economically feasible products. The electrochemical reduction of CO₂ (ERC) is one way to effectively convert CO₂ to more useful products (ranging from C1 to C5). Nevertheless, this process is kinetically hindered and less selective towards a specific product and, consequently, requires an efficient electrocatalyst with characteristics like selectivity, stability, reusability, low cost, and environmentally benign. Owing to specified commercial features, copper (Cu)-based materials are highly anticipated and widely investigated for the last two decades. However, their non-modified polycrystalline Cu forms usually lack selectivity and lower overpotential of CO₂ reduction. Therefore, extensive research is in progress to induce various alterations ranging from morphological and surface chemistry tuning to structural and optoelectrical characteristics modifications. This review provides an overview of those strategies to improve the CO₂ conversion efficiency through Cu-based ERC into valuable C1, C2_, and higher molecular weight hydrocarbons. The thermodynamics and kinetics of CO₂ reduction via Cu-based electrocatalysts are discussed in detail with the support of the first principle DFT-based models. In the last portion of the review, the reported mechanisms for various products are summarized, with a short overview of the outlook. This review is expected to provide important basics as well as advanced information for experienced as well as new researchers to develop various strategies for Cu and related materials to achieve improved ERC.

Inhibition of hydrogen evolution without debilitating electrochemical CO2 reduction via the local suppression of proton concentration and blocking of step-edges by pyridine functionalization on Cu electrocatalysts

HER suppression without debilitating CO₂RR by blocking step-edges and decreasing local H⁺ concentration on copper via pyridine functionalization.

Selective electroreduction of CO2 to ethanol over a highly stable catalyst derived from polyaniline/CuBi2O4

We highlights the importance of surface evolution by electrochemical pre-treatment while stabilizing the main body of the catalyst. The PANi/CuBi2O4via electro-chemical activation process shows high faraday efficiency to ethanol.

Covalent organic frameworks (COFs) for electrochemical applications

Covalent organic frameworks are a class of extended crystalline organic materials that possess unique architectures with high surface areas and tuneable pore sizes. Since the first discovery of the topological frameworks in 2005, COFs have been applied as promising materials in diverse areas such as separation and purification, sensing or catalysis. Considering the need for renewable and clean energy production, many research efforts have recently focused on the application of porous materials for electrochemical energy storage and conversion. In this respect, considerable efforts have been devoted to the design and synthesis of COF-based materials for electrochemical applications, including electrodes and membranes for fuel cells, supercapacitors and batteries. This review article highlights the design principles and strategies for the synthesis of COFs with a special focus on their potential for electrochemical applications. Recently suggested hybrid COF materials or COFs with hierarchical porosity will be discussed, which can alleviate the most challenging drawback of COFs for these applications. Finally, the major challenges and future trends of COF materials in electrochemical applications are outlined.

The Role of CO2 as a Mild Oxidant in Oxidation and Dehydrogenation over Catalysts: A Review

Carbon dioxide (CO2) is widely used as an enhancer for industrial applications, enabling the economical and energy-efficient synthesis of a wide variety of chemicals and reducing the CO2 levels in the environment. CO2 has been used as an enhancer in a catalytic system which has revived the exploitation of energy-extensive reactions and carry chemical products. CO2 oxidative dehydrogenation is a greener alternative to the classical dehydrogenation method. The availability, cost, safety, and soft oxidizing properties of CO2, with the assistance of appropriate catalysts at an industrial scale, can lead to breakthroughs in the pharmaceutical, polymer, and fuel industries. Thus, in this review, we focus on several applications of CO2 in oxidation and oxidative dehydrogenation systems. These processes and catalytic technologies can reduce the cost of utilizing CO2 in chemical and fuel production, which may lead to commercial applications in the imminent future.

Electroactivation-induced IrNi nanoparticles under different pH conditions for neutral water oxidation

Electrochemical oxidation processes can affect the electronic structure and activate the catalytic performance of precious-metal and transition-metal based catalysts for the oxygen evolution reaction (OER). Also there are emerging requirements to develop OER electrocatalysts under various pH conditions in order to couple with different reduction reactions. Herein, we studied the effect of pH on the electroactivation of IrNi alloy nanoparticles supported on carbon (IrNi/C) and evaluated the electrocatalytic activities of the activated IrNiO_x/C for water oxidation under neutral conditions. In addition, their electronic structures and atomic arrangement were analyzed by in situ/operando X-ray absorption spectroscopy (XAS) and identical location transmission electron microscopy techniques, showing the reconstruction of the metal elements during electroactivation due to their different stabilities depending on the electrolyte pH. IrNiO_x/C activated under neutral pH conditions showed a mildly oxidized thin IrO_x shell. Meanwhile, IrNiO_x/C activated in acidic and alkaline electrolytes showed Ni-leached IrO_x and Ni-rich IrNiO_x surfaces, respectively. Particularly, the surface of IrNiO_x/C activated under alkaline conditions shows IrO_x with a high d-band hole and NiO_x with a high oxidation state leading to excellent OER catalytic activity in neutral media (η = 384 mV at 10 mA cm^-2) whereas much lower OER activity was reported under alkaline or acid conditions. Our results, which showed that electrochemically activated catalysts under different pH conditions exhibit a unique electronic structure by modifying the initial alloy catalyst, can be applied for the design of catalysts suitable for various electrochemical reactions.

Development of an efficient catalyst with controlled sulfur vacancies and high pyridine nitrogen content for the photoelectrochemical reduction of CO2 into methanol

To efficiently and selectively produce liquid hydrocarbon fuels, e.g., methanol, by CO₂ photoelectrochemical reduction, CdS nanoparticles (NPs) anchored on the nitrogen-doped carbon particles (NCP) with core-shell dodecahedral porous structure were used as cathode catalysts. Electron paramagnetic resonance (EPR) spectra indicated that CdS/NCP treated at 500 °C had the maximum S-vacancies. The heterojunction generated between CdS with abundant S-vacancies and NCP with a high content of pyridinic N acted as synergistic catalyst for CO₂ reduction. CdS/NCP-500 catalyst exhibited a selectivity of 77.3% towards methanol with a total carbon atom conversion rate of 3052 nmol·h^-1·cm^-2. Density functional theory (DFT) calculations revealed that the S-vacancies decreased the energy barrier for CO₂ conversion into methanol product. NCP, exhibiting a high adsorption capacity for CO₂, allowed the conversion of COOH* into CO* (ΔE = -3.6 eV), which was then transferred to the CdS surface displaying abundant S-vacancies for the reduction into the methanol product.

Copper-Indium Binary Catalyst on a Gas Diffusion Electrode for High-Performance CO2 Electrochemical Reduction with Record CO Production Efficiency

Cu-In metallic hybrid is a promising non-noble catalyst for selective electrochemical CO₂ reduction (eCO₂R) to CO, but the lack of direct assembly with a gas diffusion electrode (GDE) limits the further development of eCO₂R to CO with both high Faradaic efficiency (FE) and high current density. In this study, an in situ electrochemical spontaneous precipitation (ESP) method was applied for the first time to prepare GDE-combined Cu-In electrocatalysts. The optimum Cu-In catalyst consists of a nanoscale "core-shell" structure of polycrystalline Cu_xO covered by the amorphous In(OH)₃ interface. Higher than 90% FE of CO production has been achieved. With the synergy of a GDE flow cell and 1 M KOH catholyte, a current density of ∼200 mA cm^-2 was reached at -1.17 V (reversible hydrogen electrode), which enabled a CO yield efficiency record of 3.05 mg min^-1(CO₂/15 mL min^-1 with a 2 cm² electrode). The ratios between CO and H₂ produced can be effectively modulated via fine-tuning ESP conditions demonstrating possibility of generating CO or syngas with tuneable ratios. The present study provides a simple approach for constructing novel catalytic interfaces with dual active centers for eCO₂R and other emerging electrochemical catalysis research.

Aluminum complexes with new non-symmetric ferrocenyl amidine ligands and their application in CO2 transformation into cyclic carbonates

A set of alkyl aluminum complexes supported by non-symmetric ferrocenyl amidine ligands were used as catalysts for the preparation of cyclic carbonates from epoxides and carbon dioxide using Bu₄NI as a co-catalyst.