Diverse structural reactivity patterns of a POCOP ligand with coinage metals

We have utilised the 4,6-di-tert-butyl resorcinol bis(diphenylphosphinite) (POCOP) ligand for exploring its coordination ability towards group 11 metal centres. The treatment of the bidentate ligand 1 with various coinage metal precursors afforded a wide range of structurally diverse complexes 2-12, depending upon the metal precursors used. This furnishes several multinuclear Cu(I) complexes with dimeric (2) and tetrameric cores (3, 4, and 5). The tetrameric stairstep complex 4 shows thermochromic behaviour, whereas the dimeric complex 2 and tetrameric complex 3 show luminescence properties at cryogenic temperatures. Interestingly, the halide substitution reaction of the dimeric complex 2 with KPPh2 produces a unique mixed phosphine-based tetrameric Cu(I) complex, 5. Treatment of the POCOP ligand with [CuBF4(CH3CN)4] in the presence of 2,2'-bipyridine afforded heteroleptic complex 6, consisting of tri- and tetra-coordinated cationic Cu(I) centres. Furthermore, we could also isolate cubane (8) and stairstep (9) complexes of Ag(I). The cationic Au(I) complex (12) was obtained from the dinuclear Au(I) complex of POCOP, 11. Complex 12 revealed the presence of a strong intramolecular aurophilic interaction with an Au⋯Au bond distance of 3.1143(9) Å. Subsequently, the photophysical properties of these complexes have been studied. All the complexes were characterised by single-crystal X-ray diffraction studies, routine NMR techniques, and mass spectroscopy.

Synthesis, Characterization, and Catalytic Behaviors in Isoprene Polymerization of Pyridine-Oxazoline-Ligated Cobalt Complexes

A family of pyridine-oxazoline-ligated cobalt complexes L2CoCl23a-h were synthesized and characterized. Determined via single-crystal X-ray diffraction, complexes 3a and 3d, ligated by two ligands, displayed a distorted tetrahedral coordination of a cobalt center. The X-ray structure indicated the pyridine-oxazoline ligands acted as unusual mono-dentate ligands by coordinating only to Noxazoline. Upon activation with AlEt2Cl (diethylaluminum chloride), these cobalt complexes all exhibited high catalytic activity (up to 2.5 × 106 g·molCo-1·h-1), affording cis-1,4-co-3,4-polyisoprene with molecular weights of 4.4-176 kg mol-1 and a narrow Ð of 1.79-3.42, suggesting a single-site nature of the active sites. The structure of cobalt catalysts and reaction parameters, especially co-catalysts and the reaction temperature, all have significant influence on the polymerization activity but not on the microstructure of polyisoprene.

Half-Sandwich Iridium(III), Rhodium(III), and Ruthenium(II) Complexes Chelating Hybrid sp2-N/sp3-N Donor Ligands to Achieve Improved Anticancer Selectivity

The biological efficacy of half-sandwich platinum group organometallic complexes of the formula [(η5-Cpx)/(η6-arene)M(XY)Cl]0/+ (XY = bidentate ligands; Cpx = functionalized cyclopentadienyl; M = Ir, Rh, Ru, Os) has received considerable attention due to the significance of the metal center, chelating ligand, and Cpx/arene moieties in defining their anticancer potency and selectivity. With a facile access to the BIAN-derived imine-amine ligands using alkylaluminum as the reductant, we herein described the preparation and characterization of 16 half-sandwich Ir(III), Rh(III), and Ru(II) complexes chelating the hybrid sp2-N/sp3-N donor ligand. A nonplanar five-member metallacycle was confirmed by X-ray single-crystal structures of Ir1-Ir3, Ir7, Rh1, Ru1, and Ru4. The attempt to prepare imine-amido complexes using a base as the deprotonating agent led to the mixture of imine-amine complexes, within which the leaving group Cl- was displaced, and 16-electron imine-amido complexes without Cl-. The half-sandwich imine-amine complexes in this system underwent rapid hydrolysis in aqueous solution, exhibited weak photoluminescence, and showed the ability of binding to CT-DNA and BSA. The cytotoxicity of all imine-amine complexes against A549 lung cancer cell lines, HeLa cervical cancer cell lines, and 4T1 mouse breast cancer cells was determined by an MTT assay. The IC50 values of these complexes were in a range of 5.71-67.28 μM. Notably, most of these complexes displayed improved selectivity toward A549 cancer cells versus noncancerous BEAS-2B cells in comparison with the corresponding α-diimine complexes chelating the sp2-N/sp2-N donor ligand, which have been shown no selectivity in our previous report. The anticancer selectivity of these complexes appeared to be related to the redox-based mechanism including the catalytic oxidation of NADH to NAD+, reactive oxygen species (ROS) generation, and depolarization of the mitochondrial membrane. Further, inducing apoptosis of these complexes in A549 cancer cells and BEAS-2B normal cells also correlated with their anticancer selectivity, indicating the apoptosis mode of cell death in this system. In addition, these complexes could enter A549 cells via energy-dependent pathway and were able to impede the in vitro migration of A549 cells.

A Novel Near-IR Absorbing Ruthenium(II) Complex as Photosensitizer for Photodynamic Therapy and its Cetuximab Bioconjugates

A novel Ru(II) cyclometalated photosensitizer (PS), Ru-NH2 , for photodynamic therapy (PDT) of formula [Ru(appy)(bphen)2 ]PF6 (where appy=4-amino-2-phenylpyridine and bphen=bathophenanthroline) and its cetuximab (CTX) bioconjugates, Ru-Mal-CTX and Ru-BAA-CTX (where Mal=maleimide and BAA=benzoylacrylic acid) were synthesised and characterised. The photophysical properties of Ru-NH2 revealed absorption maxima around 580 nm with an absorption up to 725 nm. The generation of singlet oxygen (1 O2 ) upon light irradiation was confirmed with a 1 O2 quantum yield of 0.19 in acetonitrile. Preliminary in vitro experiments revealed the Ru-NH2 was nontoxic in the dark in CT-26 and SQ20B cell lines but showed outstanding phototoxicity when irradiated, reaching interesting phototoxicity indexes (PI) >370 at 670 nm, and >150 at 740 nm for CT-26 cells and >50 with NIR light in SQ20B cells. The antibody CTX was successfully attached to the complexes in view of the selective delivery of the PS to cancer cells. Up to four ruthenium fragments were anchored to the antibody (Ab), as confirmed by MALDI-TOF mass spectrometry. Nonetheless, the bioconjugates were not as photoactive as the Ru-NH2 complex.

Efficient Hydrogenation of N-Heterocycles Catalyzed by NNP-Manganese(I) Pincer Complexes at Ambient Temperature

Manganese-catalyzed hydrogenation reactions have aroused widespread interest in recent years. Among the catalytic systems described, especially PNP- and NNP-Mn pincer catalysts have been reported for the hydrogenation of aldehydes, ketones, nitriles, aldimines and esters. Furthermore, NNP-Mn pincer compounds are efficient catalysts for the hydrogenolysis of less reactive amides, ureas, carbonates, and carbamates. Herein, the synthesis and application of specific imidazolylaminophosphine ligands and the corresponding Mn pincer complexes are described. These new catalysts have been characterized and studied by a combination of experimental and theoretical investigations, and their catalytic activities have been tested in several hydrogenation reactions with good to excellent performance. Especially, the reduction of N-heterocycles can be performed under very mild conditions.

Isolation of an Elusive Phosphametallacyclobutadiene and Its Role in Reversible Carbon−Carbon Bond Cleavage

The reactivity of phosphaalkynes, the isolobal and isoelectronic congeners to alkynes, with metal alkylidyne complexes is explored in this work. Treating the tungsten alkylidyne [^t BuOCO]W≡C^t Bu(THF)₂ (1) with phosphaalkyne (10) results in the formation of [O₂ C(^t BuC=)W{η² -(P,C)-P≡C-Ad}(THF)] (13-^t Bu_THF ) and [O₂ C(AdC=)W{η² -(P,C)-P≡C-^t Bu}(THF)] (13-Ad_THF ); derived from the formal reductive migratory insertion of the alkylidyne moiety into a W-C_arene bond. Analogous to alkyne metathesis, a stable phosphametallacyclobutadiene complex [^t BuOCO]W[κ² -C(^t Bu)PC(Ad)] (14) forms upon loss of THF from the coordination sphere of either 13-^t Bu_THF or 13-Ad_THF . Remarkably, the C-C bonds reversibly form/cleave with the addition or removal of THF from the coordination sphere of the formal tungsten(VI) metal center, permitting unprecedented control over the transformation of a tetraanionic pincer to a trianionic pincer and back. Computational analysis offers thermodynamic and electronic reasoning for the reversible equilibrium between 13-^t Bu/Ad_THF and 14.

Terminal Alkyne Coupling Reactions Through a Ring: Effect of Ring Size on Rate and Regioselectivity

Terminal alkyne coupling reactions promoted by rhodium(I) complexes of macrocyclic NHC-based pincer ligands-which feature dodecamethylene, tetradecamethylene or hexadecamethylene wingtip linkers viz. [Rh(CNC-n)(C2 H4 )][BArF 4 ] (n=12, 14, 16; ArF =3,5-(CF3 )2 C6 H3 )-have been investigated, using the bulky alkynes HC≡CtBu and HC≡CAr' (Ar'=3,5-tBu2 C6 H3 ) as substrates. These stoichiometric reactions proceed with formation of rhodium(III) alkynyl alkenyl derivatives and produce rhodium(I) complexes of conjugated 1,3-enynes by C-C bond reductive elimination through the annulus of the ancillary ligand. The intermediates are formed with orthogonal regioselectivity, with E-alkenyl complexes derived from HC≡CtBu and gem-alkenyl complexes derived from HC≡CAr', and the reductive elimination step is appreciably affected by the ring size of the macrocycle. For the homocoupling of HC≡CtBu, E-tBuC≡CCH=CHtBu is produced via direct reductive elimination from the corresponding rhodium(III) alkynyl E-alkenyl derivatives with increasing efficacy as the ring is expanded. In contrast, direct reductive elimination of Ar'C≡CC(=CH2 )Ar' is encumbered relative to head-to-head coupling of HC≡CAr' and it is only with the largest macrocyclic ligand studied that the two processes are competitive. These results showcase how macrocyclic ligands can be used to interrogate the mechanism and tune the outcome of terminal alkyne coupling reactions, and are discussed with reference to catalytic reactions mediated by the acyclic homologue [Rh(CNC-Me)(C2 H4 )][BArF 4 ] and solvent effects.

Coordination Flexibility of the Rh(PXP) Complex to NH3, CO, and C2H4 (PXP = Diphosphine-Based Pincer Ligand; X = B, Al, and Ga): Theoretical Insight

The recently synthesized rhodium-aluminum bimetallic complex Rh(PAlP) 1 (PAlP = pincer-type diphosphino-aluminyl ligand Al{[N(C₆H₄)]₂NMe}[CH₂P(ⁱPr)₂]₂) containing a unique Rh-Al direct bond exhibits coordination flexibility because Rh and Al can play the role of coordination site for the substrate. DFT calculations of NH₃, CO, and C₂H₄ adducts with 1 show that the Rh atom is favorable for all these substrate but the Al atom is as favorable as the Rh atom for NH₃ and unfavorable for CO and C₂H₄. NH₃ and CO prefer the coordination at the Rh-axial (Ax) site to the Rh-equatorial (Eq) site, but C₂H₄ prefers coordination at the Rh-Eq site to the Rh-Ax site. Consequently, two CO and C₂H₄ molecules coordinate with 1 at the Rh-Ax and Rh-Eq sites to afford trigonal bipyramidal complexes Rh(PAlP)(CO)₂ and Rh(PAlP)(C₂H₄)₂, which is consistent with the experimental observation of Rh(PAlP)(CO)₂. Energy decomposition analysis reveals that an electrostatic term plays an important role for NH₃ coordination with the Al atom of 1, because Al has a significantly large positive charge and NH₃ has a much negatively charged N atom and exhibits a considerably negative electrostatic potential at the Al position. In B and Ga analogues Rh(PBP) 2 and Rh(PGaP) 3, B and Ga atoms are not good for CO and C₂H₄ like the Al atom in 1. NH₃ adducts with 2 and 3 at the B and Ga sites are less stable than those adducts at the Rh-Ax site unlike the NH₃ adduct with 1 at the Al site. This difference in the NH₃ adduct between Rh(PAlP) and others (Rh(PBP) and Rh(PGaP)) arises from much less positive charges of B and Ga and a smaller atomic size of B than that of Al. These results indicate that the significantly large electropositive nature and appropriate atomic size of Al are responsible for the characteristic coordination flexibility of Rh(PAlP).

Recent Advances in Homogeneous Catalysis via Metal–Ligand Cooperation Involving Aromatization and Dearomatization

Recently, an increasing number of metal complex catalysts have been developed to achieve the activation or transformation of substrates based on cooperation between the metal atom and its ligands. In such “cooperative catalysis,” the ligand not only is bound to the metal, where it exerts steric and electronic effects, but also functionally varies its structure during the elementary processes of the catalytic reaction. In this review article, we focus on metal–ligand cooperation involving aromatization and dearomatization of the ligand, thus introducing the newest developments and examples of homogeneous catalytic reactions.

Synthesis and group 9 complexes of macrocyclic PCP and POCOP pincer ligands

The synthesis of macrocyclic variants of commonly employed phosphine-based pincer (pro)ligands derived from meta-xylene (PCP-14) and resorcinol (POCOP-14) is described, where the P-donors are trans-substituted with a tetradecamethylene linker. The former was accomplished using a seven-step asymmetric procedure involving (-)-cis-1-amino-2-indanol as a chiral auxiliary and ring-closing olefin metathesis. A related, but non-diastereoselective route was employed for the latter, which consequently necessitated chromatographic separation from the cis-substituted by-product. The proligands are readily metalated and homologous series of M^I(CO) and M^IIICl₂(CO) derivatives (M = Rh, Ir) have been isolated and fully characterised in solution and the solid state. Metal hydride complexes are generated during the synthesis of the former and have been characterised in situ using NMR spectroscopy.

Rhodapentalenes: Pincer Complexes with Internal Aromaticity

Pincer complexes are a remarkably versatile family benefited from their stability, diversity, and tunability. Many of them contain aromatic organic rings at the periphery, and aromaticity plays an important role in their stability and properties, whereas their metallacyclic cores are not aromatic. Herein, we report rhodapentalenes, which can be viewed as pincer complexes in which the metallacyclic cores exhibit considerable aromatic character. Rhodapentalenes show good thermal stability, although the rhodium-carbon bonds in such compounds are fragile. Experimental and computational studies suggest that the stabilization of rigid CCC pincer architectures together with an intrinsic aromaticity is vital for these metallacyclic rhodium species. Dearomatization-aromatization reactions, corresponding to metal-ligand cooperation of classical aromatic pincer complexes, were observed in this system. These findings suggest a new concept for pincer chemistry, the internal aromaticity involving metal d-orbitals, which would be useful for exploiting the nature of construction motif and inspire further applications.

Metal-Free Aerobic Oxidative Selective C-C Bond Cleavage in Heteroaryl-Containing Primary and Secondary Alcohols

A transition-metal-free aerobic oxidative selective C-C bond-cleavage reaction in primary and secondary heteroaryl alcohols is reported. This reaction was highly efficient and tolerated various heteroaryl alcohols, generating a carboxylic acid derivative and a neutral heteroaromatic compound. Experimental studies combined with density functional theory calculations revealed the mechanism underlying the selective C-C bond cleavage. This strategy also provides an alternative simple approach to carboxylation reaction.

Nickel(ii) PE1CE2P pincer complexes (E = O, S) for electrocatalytic proton reduction

The catalytic activity of a series of nickel complexes with different phosphinite/thiophosphinite ligands for electrocatalytic proton reduction strongly depends on the nature of the pincer ligands.

Catalytic Activity of Polynuclear vs. Dinuclear Aroylhydrazone Cu(II) Complexes in Microwave-Assisted Oxidation of Neat Aliphatic and Aromatic Hydrocarbons

One-dimensional (1D) polynuclear Cu(II) complex (1) derived from (5-bromo-2-hydroxybenzylidene)-2-hydroxybenzohydrazide (H₂L) is synthesized and characterized by elemental analysis, IR spectroscopy, ESI-MS, and single crystal X-ray crystallography. Its catalytic performance towards the solvent-free microwave-assisted peroxidative oxidation of aliphatic and aromatic hydrocarbons under mild conditions is compared with that of dinuclear Cu(II) complexes (2 and 3) of the same ligand, previously reported as antiproliferative agents. Polymer 1 exhibits the highest activity, either for the oxidation of cyclohexane (leading to overall yields, based on the alkane, of up to 39% of cyclohexanol and cyclohexanone) or towards the oxidation of toluene (selectively affording benzaldehyde up to a 44% yield), after 2 or 2.5 h of irradiation at 80 or 50 °C, respectively.

Electrocatalytic proton reduction by an air-stable nickel(ii)-thiolato PNN pincer complex

We report an air-stable nickel(ii)-thiolato PNN pincer complex [(PNN)NiII(SC6H4Me)]+[MeC6H4SO3]- (PNN = 2-((di-tert-butylphosphinomethyl-6-diethylaminomethyl)pyridine)) which is capable of reducing protons at an overpotential of 0.54 V at low acid concentrations. The proton reduction can be catalysed using weak or strong acids such as acetic acid and trifluoroacetic acid respectively. In contrast, the chloro and nitrate derivatives of the nickel pincer complex behave as poorer catalysts. A mechanism accounting for the role of the ligand in proton reduction is also briefly outlined.

Metal-Ligand Cooperation as Key in Formation of Dearomatized NiII-H Pincer Complexes and in Their Reactivity toward CO and CO2

The unique synthesis and reactivity of [(^RPNP*)NiH] complexes (1a,b), based on metal–ligand cooperation (MLC), are presented (^RPNP* = deprotonated PNP ligand, R = ⁱPr, ^tBu). Unexpectedly, the dearomatized complexes 1a,b were obtained by reduction of the dicationic complexes [(^RPNP)Ni(MeCN)](BF₄)₂ with sodium amalgam or by reaction of the free ligand with Ni⁰(COD)₂. Complex 1b reacts with CO via MLC, to give a rare case of a distorted-octahedral PNP-based pincer complex, the Ni(0) complex 3b. Complexes 1a,b also react with CO₂ via MLC to form a rare example of η¹ binding of CO₂ to nickel, complexes 4a,b. An unusual CO₂ cleavage process by complex 4b, involving C–O and C–P cleavage and C–C bond formation, led to the Ni–CO complex 3b and to the new complex [(PⁱPr₂NC₂O₂)Ni(P(O)ⁱPr₂)] (5b). All complexes have been fully characterized by NMR and X-ray crystallography.

Bifunctional colorimetric chemosensing of fluoride and cyanide ions by nickel-POCOP pincer receptors

Three Ni(ii)-POCOP pincer complexes [NiCl{C₆H₂-4-OH-2,6-(OPPh₂)₂}], 1; [NiCl{C₆H₂-4-OH-2,6-(OPtBu₂)₂}], 2 and [NiCl{C₆H₂-4-OH-2,6-(OPiPr₂)₂}], 3 were studied as bifunctional molecular sensors for inorganic anions and acetate. In CH₃CN, fluoride generates a bathochromic shift with a colorimetric change for 1-3 with a simultaneous fluorescence turn on, this optical effect is based on deprotonation of the para-hydroxy group of the POCOP ligand. On the other hand, in a neutral aqueous solution of 80 vol% CH₃CN, additions of cyanide produce a distinct change of color by forming very stable complexes with the nickel-based receptors 1-3 with log K_a in the range of 4.38-5.03 M^-1 and pronounced selectivity over other common anions such as iodide, phosphate, and acetate. Additionally, bromide shows a modest spectral change and affinity, but lower than those observed for cyanide. On the basis of ¹H NMR experiments, UV-vis titrations, ESI-MS experiments, and the crystal structure of the neutral bromo complex of 1, it is proposed that the colorimetric change involves an exchange of chloride by CN^- on the Ni(ii) atom. The Ni(ii)-based sensor 1 allows the fluorescent selective detection of fluoride with a limit of 5.66 μmol L^-1 and colorimetric sensing of cyanide in aqueous medium in the micromolar concentration range.

Catalytic activations of unstrained C–C bond involving organometallic intermediates

In this review, the transition-metal-catalyzed C–C bond activation of relatively stable and unstrained molecules involving organometallic intermediates is discussed in detail.

Substrate-Selective C-H Functionalization for the Preparation of Organosulfur Compounds from Crude Oil-Derived Components

The direct utilization of a natural feedstock in organic synthesis is an utmost challenge because the selective production of one product from a mixture of starting materials requires unprecedented substrate selectivity. In the present study, a simple and convenient procedure is evaluated for the substrate-selective alkenylation of a single component in a mixture of organosulfur compounds. Pd-catalyzed alkenylation of two-, three-, four-, and five-component mixtures of crude oil-derived sulfur species led to the exclusive C-H functionalization of only one compound. The observed remarkable substrate selectivity opens new opportunities for sustainable organic synthesis.

Selective Hydrogenation of Nitriles to Primary Amines by using a Cobalt Phosphine Catalyst

A general procedure for the catalytic hydrogenation of nitriles to primary amines by using a non-noble metal-based system is presented. Co(acac)₃ in combination with tris[2-(dicyclohexylphosphino)ethyl]phosphine efficiently catalyzes the selective hydrogenation of a wide range of (hetero)aromatic and aliphatic nitriles to give the corresponding amines.

Palladacycles having normal and spiro chelate rings designed from bi- and tridentate ligands with an indole core: structure, synthesis and applications as catalysts

Palladacycles with normal and spiro rings catalyze Suzuki–Miyaura coupling of ArBr/ArCl/allylation of aldehydes at 0.001/1 mol% loading.

NHC-based pincer ligands: carbenes with a bite

In this frontier article we overview the emergence and scope of NHC-based CCC and CNC pincer systems, i.e. complexes containing mer-tridentate ligands bearing two NHC donor groups, comment on their effectiveness in applications, and highlight areas for future development and exploitation.

Postsynthetic modifications of [2,2,2-(H)(PPh3)2-closo-2,1-RhSB8H8] with Lewis bases: cluster modular tuning

It has been demonstrated that the reaction of [2,2,2-(H)(PPh3)2-closo-2,1-RhSB8H8] () with PPh3 affords the boron substituted rhodathiaborane-PPh3 adduct, [6,6-(PPh3)2-9-(PPh3)-arachno-6,5-RhSB8H9] (). Building upon this reaction, we report herein that the 10-vertex hydridorhodathiaborane reacts with the Lewis bases, PCy3, py, 2-Mepy, 2-Etpy, 3-Mepy and 4-Mepy to form the rhodathiaborane-ligand adducts, [6,6-(PPh3)2-9-(L)-arachno-6,5-RhSB8H9], where L = PCy3 (), 2-Mepy (), 2-Etpy (), py (), 3-Mepy () or 4-Mepy (), and [8,9-μ-(H)-9-(PPh3)2-8-(L)-arachno-9,6-RhSB8H8], where L = py (), 3-Mepy () or 4-Mepy (). The selectivity of the reactions depended on the nature of the entering Lewis bases, affording the 6,5-isomers, , , and as single products for PPh3, PCy3, 2-Mepy and 2-Etpy; and mixtures of the 6,5-/9,6-regioisomers, /, / and / for py, 3-Mepy and 4-Mepy, respectively. The molecular structures of both regioisomers were characterized by X-ray diffraction analysis for the 6,5-isomers, and , and for the 9,6-isomers, and . Variable temperature NMR studies of the reaction between and PPh3 or 2-Mepy demonstrated that at low temperatures there is formation of the 9,6-species that subsequently isomerizes to the 6,5-regioisomer, indicating that for the more sterically hindered Lewis bases, PPh3, 2-Mepy and PCy3, the latter isomer is more stable and accessible through an intramolecular {Rh(PPh3)2} vertex flip. The formation of both isomers with py, 3-Mepy and 4-Mepy indicates that the kinetic and thermodynamic energies of the 6,5 and 9,6 rhodathiaborane-ligand adducts are similar for these Lewis bases. Lewis base bonding to exo-polyhedral boron vertices results in a change of the metal coordination from pseudo-octahedral Rh(iii) in to pseudo-square planar Rh(i) in the adducts. The chemistry described here highlights the remarkable structural flexibility of these polyhedral boron-containing compounds, their modular architecture and their easy postsynthetic modification.