Recent Advances in Functional Materials through Cellulose Nanofiber Templating

Advanced templating techniques have enabled delicate control of both nano- and microscale structures and have helped thrust functional materials into the forefront of society. Cellulose nanomaterials are derived from natural polymers and show promise as a templating source for advanced materials. Use of cellulose nanomaterials in templating combines nanoscale property control with sustainability, an attribute often lacking in other templating techniques. Use of cellulose nanofibers for templating has shown great promise in recent years, but previous reviews on cellulose nanomaterial templating techniques have not provided extensive analysis of cellulose nanofiber templating. Cellulose nanofibers display several unique properties, including mechanical strength, porosity, high water retention, high surface functionality, and an entangled fibrous network, all of which can dictate distinctive aspects in the final templated materials. Many applications exploit the unique aspects of templating with cellulose nanofibers that help control the final properties of the material, including, but not limited to, applications in catalysis, batteries, supercapacitors, electrodes, building materials, biomaterials, and membranes. A detailed analysis on the use of cellulose nanofibers templating is provided, addressing specifically how careful selection of templating mechanisms and methodologies, combined toward goal applications, can be used to directly benefit chosen applications in advanced functional materials.

Soft-template-assisted synthesis: a promising approach for the fabrication of transition metal oxides

The past few decades have witnessed transition metal oxides (TMOs) as promising candidates for a plethora of applications in numerous fields. The exceptional properties retained by these materials have rendered them of paramount emphasis as functional materials. Thus, the controlled and scalable synthesis of transition metal oxides with desired properties has received enormous attention. Out of different top-down and bottom-up approaches, template-assisted synthesis predominates as an adept approach for the facile synthesis of transition metal oxides, owing to its phenomenal ability for morphological and physicochemical tuning. This review presents a comprehensive examination of the recent advances in the soft-template-assisted synthesis of TMOs, focusing on the morphological and physicochemical tuning aided by different soft-templates. The promising applications of TMOs are explained in detail, emphasizing those with excellent performances.

Bacterial cellulose in food industry: Current research and future prospects

Bacterial cellulose, a pure exocellular polysaccharide produced by microorganisms, has many excellent properties as compared with plant-derived cellulose, including high water holding capability, high surface area, rheological properties, biocompatibility. Due to its suspending, thickening, water holding, stabilizing, bulking and fluid properties, BC has been demonstrated as a promising low calorie bulking ingredient for the development of novel rich functional foods of different forms such as powder gelatinous or shred foams, which facilitate its application in food industry. In this review, the recent reports on the biosynthesis, structure and general application of bacterial cellulose in food industry have been summarized and discussed. The main application of bacterial cellulose in current food industry includes raw food materials, additive ingredients, packing materials, delivery system, enzyme and cell immobilizers. In addition, we also propose the potential challenges and explore the solution of expanding the application of BC in various fields.

Highly visible-light-responsive Cu2O/rGO decorated with Fe3O4@SiO2 nanoparticles as a magnetically recyclable photocatalyst

The rhombic dodecahedral cuprous oxide-reduced graphene oxide/core-shell Fe₃O₄@SiO₂ composites (denoted as rCu₂O-rGO/Fe₃O₄@SiO₂) are successfully synthesized facilely via a wet-chemical route. The resulting rCu₂O-rGO/Fe₃O₄@SiO₂ combines the unique structure of Cu₂O, electronic characteristics of reduced graphene oxide (rGO) and magnetic property of Fe₃O₄@SiO₂ to be an effective and recoverable photocatalyst for the degradation of methyl orange (MO). The obtained results show that rCu₂O-rGO/Fe₃O₄@SiO₂ is capable of completely degrading MO in the presence of a very low catalyst concentration (0.125 g l^-1) within a short time (60 min) under visible light compared to the reported catalysts. The observations may be due to the distinctive interfacial structures of rhombic dodecahedral Cu₂O nanoparticles connected to rGO sheets that can enhance the separation of photogenerated electron-hole pairs, stabilize the Cu₂O and increase MO adsorption, as evidenced by a variety of spectroscopic analyses (transmission electron microscopy, x-ray photoelectron spectroscopy and photoluminescence). More importantly, these efficient photocatalysts can easily be recovered under a magnetic field and remain highly photoactive towards the degradation of MO after cyclic tests, and may be promising photocatalysts for practical applications in the solar-energy purification of wastewater.

Fast photocatalytic degradation of dyes using low-power laser-fabricated Cu2O–Cu nanocomposites

Facile synthesis of Cu₂O–Cu nanocomposites by using a low-power CO₂laser was realized, and the fabricated nanomaterials showed excellent photocatalytic activity for the degradation of various dyes.

Preparation, structural characterization, and in vitro cell studies of three-dimensional SiO2-CaO binary glass scaffolds built ofultra-small nanofibers

Three-dimensional (3D) nanofibrous scaffolds hold great promises in tissue engineering and regenerative medicine. In this work, for the first time, 3D SiO₂-CaO binary glass nanofibrous scaffolds have been fabricated via a combined method of template-assisted sol-gel and calcination by using bacterial cellulose as the template. SEM with EDS, TEM, and AFM confirm that the molar ratio of Ca to Si and fiber diameter of the resultant SiO₂-CaO nanofibers can be controlled by immersion time in the solution of tetraethyl orthosilicate and ethanol. The optimal immersion time was 6h which produced the SiO₂-CaO binary glass containing 60at.% Si and 40at.% Ca (named 60S40C). The fiber diameter of 60S40C scaffold is as small as 29nm. In addition, the scaffold has highly porous 3D nanostructure with dominant mesopores at 10.6nm and macropores at 20μm as well as a large BET surface area (240.9m²g^-1), which endow the 60S40C scaffold excellent biocompatibility and high ALP activity as revealed by cell studies using osteoblast cells. These results suggest that the 60S40C scaffold has great potential in bone tissue regeneration.

Visible-light-driven photodegradation of sulfamethoxazole and methylene blue by Cu2O/rGO photocatalysts

The cuprous oxide-reduced graphene oxide (Cu2O/rGO-x) composites were prepared via a simple wet-chemical method by using CuSO4·5H2O and graphene oxide as precursors and ascorbic acid as a reducing agent, respectively. These Cu2O/rGO-x were employed as photocatalysts for degrading emerging contaminants and organic dye pollutants (i.e., sulfamethoxazole (SMX) and methylene blue (MB)) under visible light. A variety of different spectroscopic and analytical techniques, such as X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, Raman scattering spectroscopy and UV-Visible spectroscopy were used to characterize the physical properties of photocatalysts. In the photodegrading experiments, it can be found that the Cu2O/rGO-80 photocatalyst has the superior visible-light response of ca. 50% removal efficiency of SMX within 120 min and 100% removal efficiency of MB within 40 min. These observations may be attributed the well-dispersed and visible-light-responsive Cu2O nanoparticles are supported on the surface of rGO sheets that can enhance absorption of visible light during photocatalysis.

Oxygen-vacancy modified TiO2 nanoparticles as enhanced visible-light driven photocatalysts by wrapping and chemically bonding with graphite-like carbon

In this work, an effective composite photocatalyst (TC800) was prepared which exhibits higher photocatalytic activity under visible light than previously reported TiO₂/non-graphene carbon compounds.

Bacterial cellulose-templated synthesis of free-standing silica nanotubes with a three-dimensional network structure

Free-standing silica nanotubes with a three-dimensional network structure were prepared via a template-assisted sol–gel process by using bacterial cellulose as a template and catalyst and for calcination.

Evolution of morphology of bacterial cellulose scaffolds during early culture

Morphological characteristics of a fibrous tissue engineering (TE) scaffold are key parameters affecting cell behavior. However, no study regarding the evolution of morphology of bacterial cellulose (BC) scaffolds during the culture process has been reported to date. In this work, BC scaffolds cultured for different times starting from 0.5h were characterized. The results demonstrated that the formation of an integrated scaffold and its 3D network structure, porosity, fiber diameter, light transmittance, and the morphology of hydroxyapatite (HAp)-deposited BC scaffolds changed with culture time. However, the surface and crystal structure of BC fibers did not change with culture time and no difference was found in the crystal structure of HAp deposited on BC templates regardless of BC culture time. The findings presented herein suggest that proper selection of culture time can potentially enhance the biological function of BC TE scaffold by optimizing its morphological characteristics.

A new rapid chemical route to prepare reduced graphene oxide using copper metal nanoparticles

Copper metal nanoparticles were used as a reducing agent to reduce graphene oxide (GO). The reaction was complete in about 10 min and did not involve the use of any toxic reagents or acids that are typically used in the reduction of GO by Zn and Fe powders. The high reduction activity of the Cu nanoparticles, compared to Cu powder, may be the result of the formation of Cu₂O nanoparticles. The effect of the mass ratio of the metal to GO for this reduction was also investigated. The reduction of the GO was verified by ultraviolet-visible absorption spectroscopy, x-ray diffraction, thermogravimetric analysis, Raman spectroscopy, x-ray photoelectron spectroscopy and transmission electron microscopy. After reduction, Cu₂O supported on reduced GO was formed and showed superior catalytic ability for the degradation of a model dye pollutant, methylene blue.