An efficient pretreatment method based on AgNPs-doped SnO2 photocatalyst for the accurate detection of heavy metals in organic-rich water samples

Humic acid (HA), the primary composition of natural organic matter (NOM) widely distributed in water and soil, can complex with heavy metal ions (HMIs), i.e., Cd(II) and Pb(II) in this study, which deters the accurate detection of HMIs using square wave anodic stripping voltammetry (SWASV). Hence, in this study, an efficient pretreatment method was proposed to restore the electrochemical signal of Cd(II) and Pb(II) by breaking the complexation based on AgNPs-doped SnO2 photocatalyst combined with LP/UV irradiation. Optimization of the key parameters for electrochemical signal restoration including pH for photolysis, AgNPs doping rate, photocatalyst dosage and photolysis time were performed to further elevating the accuracy in the proposed pretreatment method over 96.9% for Cd(II) and Pb(II) in 15 min. The effect of different HA concentrations on SWASV signal of Cd(II) and Pb(II) was also investigated adopting the optimal parameters. Then, the UV-vis absorption spectra, crystal structure, and the morphology of AgNPs-doped SnO2 photocatalyst were investigated to excavate the reasons behind the most excellent AgNPs doping rate to SnO2 in signal restoration. Moreover, the behavior of HA degradation and transformation under LP/UV irradiation was studied to investigate the mechanism of electrochemical signal restoration. Finally, the feasibility of the proposed method was testified by comparing detection results with ICP-MS results using real water samples extracted from aquaculture water.

Tin Oxide Nanorod Array-Based Photonic Memristors with Multilevel Resistance States Driven by Optoelectronic Stimuli

One-dimensional (1D) metal oxide-based photonic memristors, combining information storage and optical response, have shown great potential for the design and development of high-density and high-efficient computing systems beyond the era of von-Neumann architecture and Moore's law. Here, the functional memristive devices based on SnO_x slanted nanorod arrays are demonstrated; wherein both the optical and electrical stimuli have been used to modulate the switching characteristics to achieve multilevel cell operations. The switching characteristics of Al/SnO_x/FTO devices include low operating voltages (0.7 V/-0.6 V), moderate ON/OFF ratio (>10), and longer endurance (>10² cycles) and retention (>10³ s) with a self-compliance effect in the dark. Under illumination, ranging from ultraviolet (254 and 365 nm) to visible light (405 and 533 nm), an unusual negative photo response with an enlarged ON/OFF ratio of >10⁷ and a faster response time of <8 ms is observed. Additionally, multiple low and high resistance states have been achieved by modulating the programming current and the optical stimulus, respectively. The optoelectronic resistive memory behavior is attributed to the electric field-induced formation and light-stimulated dissolution of oxygen vacancies. Comprehensively, the results suggest that the optical illumination reduces the oxygen ion migration barrier, leading to the dissolution of conductive filaments and thereby locally increasing the OFF state resistance. The fabricated photonic memristors demonstrate the potential applications of metal oxide-based 1D nanostructures for artificial visual memory and optoelectronic applications.

Fundamentals and comprehensive insights on pulsed laser synthesis of advanced materials for diverse photo- and electrocatalytic applications

The global energy crisis is increasing the demand for innovative materials with high purity and functionality for the development of clean energy production and storage. The development of novel photo- and electrocatalysts significantly depends on synthetic techniques that facilitate the production of tailored advanced nanomaterials. The emerging use of pulsed laser in liquid synthesis has attracted immense interest as an effective synthetic technology with several advantages over conventional chemical and physical synthetic routes, including the fine-tuning of size, composition, surface, and crystalline structures, and defect densities and is associated with the catalytic, electronic, thermal, optical, and mechanical properties of the produced nanomaterials. Herein, we present an overview of the fundamental understanding and importance of the pulsed laser process, namely various roles and mechanisms involved in the production of various types of nanomaterials, such as metal nanoparticles, oxides, non-oxides, and carbon-based materials. We mainly cover the advancement of photo- and electrocatalytic nanomaterials via pulsed laser-assisted technologies with detailed mechanistic insights and structural optimization along with effective catalytic performances in various energy and environmental remediation processes. Finally, the future directions and challenges of pulsed laser techniques are briefly underlined. This review can exert practical guidance for the future design and fabrication of innovative pulsed laser-induced nanomaterials with fascinating properties for advanced catalysis applications.

Tin oxide based nanostructured materials: synthesis and potential applications

In view of their inimitable characteristics and properties, SnO₂ nanomaterials and nanocomposites have been used not only in the field of diverse advanced catalytic technologies and sensors but also in the field of energy storage such as lithium-ion batteries and supercapacitors, and in the field of energy production such as solar cells and water splitting. This review discusses the various synthesis techniques such as traditional methods, including processes like thermal decomposition, chemical vapor deposition, electrospinning, sol-gel, hydrothermal, solvothermal, and template-mediated methods and green methods, which include synthesis through plant-mediated, microbe-mediated, and biomolecule-mediated processes. Moreover, the advantages and limitations of these synthesis procedures and how to overcome them that would lead to future research are also discussed. This literature also focuses on various applications such as environmental remediation, energy production, energy storage, and removal of biological contaminants. Therefore, the rise and journey of SnO₂-based nanocomposites will motivate the modern generation of chemists to modify and design robust nanoparticles and nanocomposites that can effectively tackle significant environmental challenges. This overview concludes by providing future perspectives on research into tin oxide in synthesis and its various applications.

Pulsed Laser in Liquids Made Nanomaterials for Catalysis

Catalysis is essential to modern life and has a huge economic impact. The development of new catalysts critically depends on synthetic methods that enable the preparation of tailored nanomaterials. Pulsed laser in liquids synthesis can produce uniform, multicomponent, nonequilibrium nanomaterials with independently and precisely controlled properties, such as size, composition, morphology, defect density, and atomistic structure within the nanoparticle and at its surface. We cover the fundamentals, unique advantages, challenges, and experimental solutions of this powerful technique and review the state-of-the-art of laser-made electrocatalysts for water oxidation, oxygen reduction, hydrogen evolution, nitrogen reduction, carbon dioxide reduction, and organic oxidations, followed by laser-made nanomaterials for light-driven catalytic processes and heterogeneous catalysis of thermochemical processes. We also highlight laser-synthesized nanomaterials for which proposed catalytic applications exist. This review provides a practical guide to how the catalysis community can capitalize on pulsed laser in liquids synthesis to advance catalyst development, by leveraging the synergies of two fields of intensive research.

Synthesis and characterization of SnO2 NPs for photodegradation of eriochrome black-T using response surface methodology

The domestic and industrial sewage contains an extensive range of various organic compounds. Due to the toxicity of these materials, their degradation is considered one of the great environmental challenges. To address this problem, SnO₂ nanoparticles (NPs) were synthesized via a green route, and they were used as an efficient catalyst for the degradation of an organic dye. In the stage of synthesis of nanoparticles, Thymus vulgaris L. extract acted as an efficient capping agent and renewable reducing agent, and SnO₂ NPs were synthesized without addition of any hazardous surfactants. The successful synthesis of SnO₂ NPs was confirmed by XRD, FT-IR, SEM, EDX, and TEM. The photocatalytic performance of SnO₂ NPs was examined for the degradation of eriochrome black-T (ECBT) as a toxic organic dye in aqueous medium under ultraviolet irradiation. Furthermore, the response surface methodology (RSM) with central composite design (CCD) model was carried out to study of the effects of three different operational parameters on degradation of ECBT. In this design, initial pH of solution (3-11), reaction time (0.5-4 h), and the catalyst loading (0.05-0.12 g) were selected as three factors, whereas the degradation efficiency was chosen as the response. The results of the experimental design indicated that initial pH and catalyst loading were highly significant factors, whereas the reaction time was less important than other factors. Also, recyclability of catalyst was investigated, and the obtained results showed that SnO₂ NPs could be easily recovered and reused for at least 4 cycles without any significant decrease in their activity.

Mechanisms involved in the impact of engineered nanomaterials on the joint toxicity with environmental pollutants

Emerging nanoscience and nanotechnology inevitably facilitate discharge of engineered nanomaterials (ENMs) into the environment. Owing to their versatile physicochemical properties, ENMs invariably come across and interact with various pollutants already existing in the environment, leading to considerable uncertainty regarding the risk assessment of pollutants. Nevertheless, the underlying mechanisms of the complicated joint toxicity are still largely unexplored. This review aims to aid in understanding the interaction of ENMs and pollutants from the perspective of ecological and environmental health risk assessment. Based on related research published from 2005 to 2018, this review focuses on summarizing the effect of ENMs on the toxicity of pollutants both in vivo and in vitro. Physicochemical interaction appears as a main factor affecting ENMs-pollutants joint toxicity, with the mechanisms and the resultants for ENM-pollutant adsorption been illustrated. Cellular and molecular mechanisms involved in the joint toxicity of ENMs and pollutants are discussed, including the effect of ENMs on the bioaccumulation, biodistribution, and metabolism of pollutants, as well as the defense responses of organisms against such pollutants. Future in-depth investigation are suggested to focus on further exploring biological mechanisms (especially for the antagonized effect of ENMs against pollutants), using more advanced mammalian models, and paying more attention to the realistic exposure scenarios.

Laser-Ablated ZnO Nanoparticles and Their Photocatalytic Activity toward Organic Pollutants

This work aimed to prepare nanostructures of ZnO with various lasers, testing them as photocatalysts, and comparing their morphology and activity in the degradation of organic pollutants in aqueous media. ZnO nanospheres (ns-ZnO) and ZnO nanorods (ms-ZnO) were prepared via the laser ablation of a Zn metal plate in water using nanosecond- and millisecond-pulsed lasers, respectively. The obtained materials were characterized using a set of optical, structural, and surface-science techniques, such as UV-vis spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). Under visible-light irradiation, both nanostructures were found to be catalytically active toward the oxidation of methylene blue, which was used as a model compound. The ZnO nanorods fabricated with the millisecond laser showed better photocatalytic performance than their spherically shaped counterparts obtained by means of the nanosecond laser, which could be assigned to a larger number of defects on the ms-ZnO surface.

Laser Synthesis and Processing of Colloids: Fundamentals and Applications

Driven by functionality and purity demand for applications of inorganic nanoparticle colloids in optics, biology, and energy, their surface chemistry has become a topic of intensive research interest. Consequently, ligand-free colloids are ideal reference materials for evaluating the effects of surface adsorbates from the initial state for application-oriented nanointegration purposes. After two decades of development, laser synthesis and processing of colloids (LSPC) has emerged as a convenient and scalable technique for the synthesis of ligand-free nanomaterials in sealed environments. In addition to the high-purity surface of LSPC-generated nanoparticles, other strengths of LSPC include its high throughput, convenience for preparing alloys or series of doped nanomaterials, and its continuous operation mode, suitable for downstream processing. Unscreened surface charge of LSPC-synthesized colloids is the key to achieving colloidal stability and high affinity to biomolecules as well as support materials, thereby enabling the fabrication of bioconjugates and heterogeneous catalysts. Accurate size control of LSPC-synthesized materials ranging from quantum dots to submicrometer spheres and recent upscaling advancement toward the multiple-gram scale are helpful for extending the applicability of LSPC-synthesized nanomaterials to various fields. By discussing key reports on both the fundamentals and the applications related to laser ablation, fragmentation, and melting in liquids, this Article presents a timely and critical review of this emerging topic.

Ni3+ doped cobalt–nickel layered double hydroxides as high-performance electrode materials for supercapacitors

Ni³⁺ doped Co_0.55Ni_0.45-LDHs present a high rate specific capacitance and good cycling stability as supercapacitor electrode materials.

Laser-induced growth of YVO4:Eu3+ nanoparticles from sequential flowing aqueous suspension

Ligand-free lanthanide ion-doped oxide nanoparticles have critical biological applications.

Nanostructures prepared via laser ablation of tin in water

Ablation of Sn in water with millisecond and nanosecond pulsed lasers produces different core@shell nanostructures.

Layered mesoporous Mg(OH)2/GO nanosheet composite for efficient removal of water contaminants

Mg(OH)₂ flakes composited on GO nanosheets as triggered by the colloidal electrostatic self-assembly in an liquid laser ablation process. The as-synthesized composite presented excellent adsorption performance for MB and heavy metal ions.

Highly Dispersed Ultrafine Pt Nanoparticles on Reduced Graphene Oxide Nanosheets: In Situ Sacrificial Template Synthesis and Superior Electrocatalytic Performance for Methanol Oxidation

We report a simple and environmentally friendly route to prepare platinum/reduced graphene oxide (Pt/rGO) nanocomposites (NCs) with highly reactive MnOx colloids as reducing agents and sacrificial templates. The colloids are obtained by laser ablation of a metallic Mn target in graphene oxide (GO)-containing solution. Structural and morphological investigations of the as-prepared NCs revealed that ultrafine Pt nanoparticles (NPs) with an average size of 1.8 (±0.6) nm are uniformly dispersed on the surfaces of rGO nanosheets. Compared with commercial Pt/C catalysts, Pt/rGO NCs with highly electrochemically active surface areas show remarkably improved catalytic activity and durability toward methanol oxidation. All of these superior characteristics can be attributed to the small particle size and uniform distribution of the Pt NPs, as well as the excellent electrical conductivity and stability of the rGO catalyst support. These findings suggest that Pt/rGO electrocatalysts are promising candidate materials for practical use in fuel cells.

Tin oxide nanoparticles from laser ablation encapsulated in a carbonaceous matrix – a negative electrode in lithium-ion battery applications

This report concerns carbonaceous electrodes doped with tin(ii) oxide nanoparticles.

Graphene-decorated porous ceramics for efficient removal of Cr(vi)

Porous ceramics (such as activated alumina (AA)) is a common adsorbent material in water purification.

Highly stable sub-5 nm Sn₆O₄(OH)₄ nanocrystals with ultrahigh activity as advanced photocatalytic materials for photodegradation of methyl orange

Among numerous active photocatalytic materials, Sn-based oxide nanomaterials are promising photocatalytic materials in environmental protection measures such as water remediation due to their excellent physicochemical property. Research on photocatalytic nanomaterials for photodegradation of methyl orange (MO) so far has focused on TiO₂-based nanostructures; e.g., TiO₂-P25 is recognized to be the best commercial photocatalyst to date, rather than Sn-based oxide nanomaterials, in spite of their impressive acid- and alkali-resistant properties and high stability. Here, we demonstrate very high photocatalytic activity of highly stable sub-5 nm hydromarchite (Sn₆O₄(OH)₄) nanocrystals synthesized by a simple and environmentally friendly laser-based technique. These Sn₆O₄(OH)₄ nanocrystals exhibit ultrahigh photocatalytic performance for photodegradation of MO and their degradation efficiency is far superior to that of TiO₂-P25. The detailed investigations demonstrated that the great photocatalytic activity results from the ultrafine size and unique surface activity induced by the laser-based technique. Mass production of reactive species of hydroxyl radicals was detected in the experiments due to the appropriate bandgap of Sn₆O₄(OH)₄ nanocrystals. These findings actually open a door to applications of Sn-based oxide nanomaterials as advanced photocatalytic materials.

Highly photoactive SnO2 nanostructures engineered by electrochemically active biofilm

This paper reports the defect-induced band gap narrowing of pure SnO₂ nanostructures (p-SnO₂) using an electrochemically active biofilm (EAB).

Low threshold amplified spontaneous emission from tin oxide quantum dots: a instantiation of dipole transition silence semiconductors

Direct bandgap semiconductors, such as In2O3, Cu2O, and SnO2, have enormous applications in photochemistry, photovoltaics, and optoelectronics. Due to the same parity of conduction and valence bands, the dipole transition is silent in these direct bandgap semiconductors. The low band-to-band transition efficiency prevents them from high intensity light emission or absorption. Here, we report the fabrication of SnO2 quantum dots (QDs) with sizes less than the exciton Bohr radius by a facile "top-down" strategy based on laser fragmentation of SnO in water. The SnO2 QDs shows exciton emission at ∼300 nm with a high quantum yield of ~17%. Amplified spontaneous exciton emission is also achieved from a thin layer of SnO2 QDs dispersed in PEG400 on a quartz substrate. Therefore, we have shown that SnO2 QDs can be a potential luminescent material suitable for the realization of ultraviolet B lasing devices.

Super-stable ultrafine beta-tungsten nanocrystals with metastable phase and related magnetism

Ultrafine tungsten nanocrystals (average size of 3 nm) with a metastable phase (beta-tungsten with A15 structure, β-W) have been prepared by laser ablation of tungsten in liquid nitrogen. The as-prepared metastable nanocrystals exhibited super-stablity, and can keep the same metastable structure over a period of 6 months at room temperature. This super-stability is attributed to the nanosized confinement effect of ultrafine nanocrystals. The magnetism measurements showed that the β-W nanocrystals have weak ferromagnetic properties at 2 K, which may arise from surface defects and unpaired electrons on the surface of the ultrafine nanocrystals. These findings provided useful information for the application of ultrafine β-W nanocrystals in microelectronics and spintronics.