Evaluating Atmospheric pressure Solids Analysis Probe (ASAP) mass spectrometry for the analysis of low molecular weight synthetic polymers

Degradation strategies for structural characterization of insoluble synthetic polymers by mass spectrometry

With the advent of soft ionization techniques such as electrospray (ESI) and matrix-assisted laser desorption/ionization (MALDI) to produce intact gas-phase ions from nonvolatile macromolecules, mass spectrometry has become an essential technique in the field of polymeric materials. However, (co)polymers of very high molecular weight or with reticulated architectures still escape ESI or MALDI, mainly due to solubility issues. Strategies developed to tackle such an analytical challenge all rely on sample degradation to produce low-mass species amenable to existing ionization methods. Yet, chain degradation needs to be partial and controlled to generate sufficiently large species that still contain topological or architectural information. The present article reviews the different analytical degradation strategies implemented to perform mass spectrometry of these challenging synthetic polymers, covering thermal degradation approaches in sources developed in the 2000s, off-line sample pre-treatments for controlled chemical degradation of polymeric substrates, and most recent achievements employing reactive ionization modes to perform chemolysis on-line with MS.

Direct Mass Spectrometric Analysis of Brominated Flame Retardants in Synthetic Polymers

Brominated flame retardants (BFRs) are persistent organic pollutants that pose a major threat to the environment. In this study, a direct insertion probe (DIP) coupled with atmospheric pressure chemical ionization (APCI) quadrupole time-of-flight mass spectrometry (QTOF-MS) was used to characterize additives, especially BFRs, from solid polymer samples with minimal sample preparation. A temperature-programmed DIP analysis, from 150 to 450 °C within 10 min, was utilized to achieve temporal separation of analytes based on their boiling or degradation temperatures, thereby facilitating their easier identification within a single run. Studied BFRs showed different behaviors during the analysis: decabromodiphenyl ether and tetrabromobisphenol A were found to be stable within the studied temperature range, while hexabromocyclododecane already started to debrominate. Our study showed that the DIP-APCI-MS method suited well for the direct qualitative identification of BFRs from polymer matrices. Furthermore, by optimizing the sampling procedure with cryogenic grinding, even quantitative analysis could be performed. The DIP measurements also provided important information about the composition of polymer matrices, including the identification of the comonomers present. Overall, DIP-APCI QTOF-MS was found to be an excellent tool for the compositional analysis of plastic samples. Developing rapid and reliable analysis methods can pave the way for more efficient plastic recycling and the safer use of plastic recyclates.

Mass spectrometry of polymers: A tutorial review

Ever since the inception of synthetic polymeric materials in the late 19th century, the number of studies on polymers as well as the complexity of their structures have only increased. The development and commercialization of new polymers with properties fine-tuned for specific technological, environmental, consumer, or biomedical applications requires powerful analytical techniques that permit the in-depth characterization of these materials. One such method with the ability to provide chemical composition and structure information with high sensitivity, selectivity, specificity, and speed is mass spectrometry (MS). This tutorial review presents and exemplifies the various MS techniques available for the elucidation of specific structural features in a synthetic polymer, including compositional complexity, primary structure, architecture, topology, and surface properties. Key to every MS analysis is sample conversion to gas-phase ions. This review describes the fundamentals of the most suitable ionization methods for synthetic materials and provides relevant sample preparation protocols. Most importantly, structural characterizations via one-step as well as hyphenated or multidimensional approaches are introduced and demonstrated with specific applications, including surface sensitive and imaging techniques. The aim of this tutorial review is to illustrate the capabilities of MS for the characterization of large, complex polymers and emphasize its potential as a powerful compositional and structural elucidation tool in polymer chemistry.

Differentiation of Four Polyvinylidene Fluoride Polymers Based on Their End Groups by DART-FT-ICR MS and Kendrick Plots

Nowadays, synthetic polymers are produced and used in many materials for different applications. Matrix-assisted laser desorption/ionization or electrospray mass spectrometry are classically used to investigate them, but these techniques require sample preparation steps, which are not always suitable for the study of insoluble or formulated polymers. Alternatively, direct real-time (DART) ionization analysis may be conducted without sample preparation. Four polyvinylidene fluoride (PVDF) polymers involving the C2H2F2 repeating unit coming from different suppliers have been analyzed by DART Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) in negative-ion mode. The obtained mass spectra systematically displayed an oligomeric distribution between m/z 400 and 1300 of [M - H]-, [M + O2]•-, and [M + NO2]- ions. Kendrick plots were used to ease the identification of PVDF end-groups and establish a difference between the samples. Both commercial PVDF polymers shared the same α+ω end groups formula, which confirmed a similar polymerization process for their synthesis. The two other PVDFs were clearly different from the commercial ones by the occurrence of specific end-groups. MS/MS and MS3 experiments were conducted to obtain structural information on these end-groups.

Rapid Chemical Screening of Microplastics and Nanoplastics by Thermal Desorption and Pyrolysis Mass Spectrometry with Unsupervised Fuzzy Clustering

The transport and chemical identification of microplastics and nanoplastics (MNPs) are critical to the concerns over plastic accumulation in the environment. Chemically and physically transient MNP species present unique challenges for isolation and analysis due to many factors such as their size, color, surface properties, morphology, and potential for chemical change. These factors contribute to the eventual environmental and toxicological impact of MNPs. As analytical methods and instrumentation continue to be developed for this application, analytical test materials will play an important role. Here, a direct mass spectrometry screening method was developed to rapidly characterize manufactured and weathered MNPs, complementing lengthy pyrolysis-gas chromatography-mass spectrometry analysis. The chromatography-free measurements took advantage of Kendrick mass defect analysis, in-source collision-induced dissociation, and advancements in machine learning approaches for the data analysis of complex mass spectra. In this study, we applied Gaussian mixture models and fuzzy c-means clustering for the unsupervised analysis of MNP sample spectra, incorporating clustering stability and information criterion measurements to determine latent dimensionality. These models provided insight into the composition of mixed and weathered MNP samples. The multiparametric data acquisition and machine learning approach presented improved confidence in polymer identification and differentiation.

A Mass Spectrometry-Machine Learning Approach for Detecting Volatile Organic Compound Emissions for Early Fire Detection

Mass spectrometry in parallel with real-time machine learning techniques were paired in a novel application to detect and identify chemically specific, early indicators of fires and near-fire events involving a set of selected materials: Mylar, Teflon, and poly(methyl methacrylate) (PMMA). The volatile organic compounds emitted during the thermal decomposition of each of the three materials were characterized using a quadrupole mass spectrometer which scanned the 1-200 m/z range. CO2, CH3CHO, and C6H6 were the main volatiles detected during Mylar thermal decomposition, while Teflon's thermal decomposition yielded CO2 and a set of fluorocarbon compounds including CF4, C2F4, C2F6, C3F6, CF2O, and CF3O. PMMA produced CO2 and methyl methacrylate (MMA, C5H8O2). The mass spectral peak patterns observed during the thermal decomposition of each material were unique to that material and were therefore useful as chemical signatures. It was also observed that the chemical signatures remained consistent and detectable when multiple materials were heated together. Mass spectra data sets containing the chemical signatures for each material and mixtures were collected and analyzed using a random forest panel machine learning classification. The classification was tested and demonstrated 100% accuracy for single material spectra and an average of 92.3% accuracy for mixed material spectra. This investigation presents a novel technique for the real-time, chemically specific detection of fire related VOCs through mass spectrometry which shows promise as a more rapid and accurate method for detecting fires or near-fire events.

Rapid Single Particle Atmospheric Solids Analysis Probe-Mass Spectrometry for Multimodal Analysis of Microplastics

Despite mass spectrometry (MS) being proven powerful for the characterization of synthetic polymers, its potential for the analysis of single particle microplastics (MPs) is yet to be fully disclosed. To date, MPs are regarded as ubiquitous contaminants, but the limited availability of techniques that enable full characterizations of MPs results in a lack of systematic data regarding their occurrence. In this study, an atmospheric solid analysis probe (ASAP) coupled to a compact quadrupole MS is proposed for the chemical analysis of single particle microplastics, while maintaining full compatibility with complementary staining and image analysis approaches. A two-stage ASAP probe temperature program was optimized for the removal of additives and surface contaminants followed by the actual polymer characterization. The method showed specific mass spectra for a wide range of single particle MPs, including polyolefins, polyaromatics, polyacrylates, (bio)polyesters, polyamides, polycarbonates, and polyacrylonitriles. The single particle size detection limits for polystyrene MPs were found to be 30 and 5 μm in full scan and selected ion recording mode, respectively. Moreover, results are presented of a multimodal microplastic analysis approach in which filtered particles are first characterized by staining and fluorescence microscopy, followed by simple probe picking of individual particles for subsequent analysis by ASAP-MS. The method provides a full characterization of MP contamination, including particle number, particle size, particle shape, and chemical identity. The applicability of the developed multimodal method was successfully demonstrated by the analysis of MPs in bioplastic bottled water.

Versatile, Cheap, Readily Modifiable Sample Delivery Method for Analysis of Air-/Moisture-Sensitive Samples Using Atmospheric Pressure Solids Analysis Probe Mass Spectrometry

A cheap, versatile, readily modified, and reusable glass probe system enabling delivery of solid air-/moisture-sensitive samples for mass spectrometric (MS) analysis using an Atmospheric pressure Solids Analysis Probe (ASAP) is described. The simplicity of the design allows quick and easy ASAP MS analyses of sensitive solid and liquid samples without the need for any modifications to commercially available vertically loaded ASAP mass spectrometers. A comparison of ASAP mass spectra obtained for metal complexes under air and an inert atmosphere is given.

Comparison of LC-ESI, DART, and ASAP for the analysis of oligomers migration from biopolymer food packaging materials in food (simulants)

Biopolymers based on polylactic acid (PLA) and starch have numerous advantages, such as coming from renewable sources or being compostable, though they can have deficiencies in mechanical properties, and for this reason, polyester resins are occasionally added to them in order to improve their properties. In this work, migration from a PLA sample and from another starch-based biopolymer to three different food simulants was studied. Attention was focused on the determination of oligomers. The analysis was first performed by ultraperformance liquid chromatography quadrupole-time-of-flight mass spectrometry (UPLC-Q-TOF–MS), which allowed the identification of the oligomers present in migration. Then, the samples were analyzed by two ambient desorption/ionization techniques directly coupled to mass spectrometry (ADI), direct analysis in real-time coupled to standardized voltage and pressure (DART-MS) and atmospheric pressure solids analysis probe (ASAP-MS). These methodologies were able to detect simultaneously the main oligomers migrants and their adducts in a very rapid and effective way. Nineteen different polyester oligomers, fourteen linear and five cyclic, composed of different combinations of adipic acid [AA], propylene glycol [PG], dipropylene glycol [DPG], 2,2-dibutyl-1,3-propanediol [DBPG], or isobutanol [i-BuOH] were detected in migration samples from PLA. In migration samples from starch-based biopolymer, fourteen oligomers from poly(butylene adipate co-terephthalate) polyester (PBAT) were identified, twelve cyclic and two linear. The results from ADI techniques showed that they are a very promising alternative tool to assess the safety and legal compliance of food packaging materials.

Rapid geographical indication of peppercorn seeds using corona discharge mass spectrometry

With increasing demands for more rapid and practical analyses, various techniques of ambient ionization mass spectrometry have gained significant interest due to the speed of analysis and abundance of information provided. Herein, an ambient ionization technique that utilizes corona discharge was applied, for the first time, to analyze and categorize whole seeds of black and white peppers from different origins. This setup requires no solvent application nor gas flow, thus resulting in a very simple and rapid analysis that can be applied directly to the sample without any prior workup or preparation. Combined with robust data pre-processing and subsequent chemometric analyses, this analytical method was capable of indicating the geographical origin of each pepper source with up to 98% accuracies in all sub-studies. The simplicity and speed of this approach open up the exciting opportunity for onsite analysis without the need for a highly trained operator. Furthermore, this methodology can be applied to a variety of spices and herbs, whose geographical indication or similar intellectual properties are economically important, hence it is capable of creating tremendous impact in the food and agricultural industries.

Regio- and Stereo-Specific Chemical Depolymerization of High Molecular Weight Polybutadiene and Polyisoprene for Their Analysis by High-Resolution Fourier Transform Ion Cyclotron Resonance Mass Spectrometry: Comparison with Pyrolysis-Comprehensive Two-Dimensional Gas Chromatography/Mass Spectrometry, Atmospheric Solid Analysis Probe, Direct Inlet Probe-Atmospheric Pressure Chemical Ionization Mass Spectrometry, and Ion Mobility Spectrometry-Mass Spectrometry

Polybutadiene (PB) and polyisoprene (PI), the two most common polydienes (PD), are involved in a large number of materials and used in a wide variety of applications. The characterization of these polymers by mass spectrometry (MS) continues to be very challenging due to their high insolubility and the difficulty to ionize them. In this work, a cross-metathesis reaction was used to generate end-functionalized acetoxy ionizable oligomers for the structural deciphering of different commercial PB and PI samples. A cross-metathesis reaction was carried out between polymers and the Z-1,4-diacetoxy-2-butene as a chain transfer agent in dichloromethane using a Hoveyda-Grubbs second-generation catalyst. Well-defined acetoxy telechelic structures were obtained and analyzed by Fourier transform ion cyclotron resonance (FTICR) high-resolution MS. However, after depolymerization, low molar mass polyolefins contained some units with different configurations, suggesting an olefin isomerization reaction due to the decomposition of the catalyst. The addition of an electron-deficient reagent such as 2,6-dichloro-1,4-benzoquinone suppressed this isomerization in the case of both Z- and E-PB and PI. Ion mobility spectrometry-mass spectrometry (IMS-MS) and energy-resolved tandem mass spectrometry (ERMS) analyses confirmed a successful isomerization suppression. For comparing the results obtained by depolymerization with classical methods for polymer analysis, pyrolysis-comprehensive two-dimensional gas chromatography/mass spectrometry (Py-GC × GC-MS), atmospheric solid analysis probe (ASAP), and direct inlet probe-atmospheric pressure chemical ionization (DIP-APCI) analyses were performed on the same polymers. This strategy can be applied on a variety of synthetic and natural not yet characterized polymers.

High-performance thin-layer chromatography with atmospheric solids analysis probe mass spectrometry for analysis of gasoline polymeric additives

RATIONALE

The offline coupling of high-performance thin-layer chromatography (HPTLC) with atmospheric solids analysis probe mass spectrometry (ASAP-MS) was evaluated for the characterization of polymeric additives in gasoline.

METHODS

A protocol was developed to optimize the ion signal. A glass capillary was moistened with deionized water, and then dipped into silica gel scratched from an HPTLC plate. The capillary tube was fixed to the ASAP holder and introduced into the ionization source for analysis by MS. Silica gel, reversed-phase C18 and cellulose stationary phases were evaluated.

RESULTS

The effect of the stationary phase and the nature of analyte were evaluated using polypropylene glycol and polyisobutylene succinimide polyamine as analyte molecules. The optimal ionization conditions are significantly different between ASAP and HPTLC/ASAP-MS analyses. In particular, a higher desorption gas temperature was required to produce ions from the silica gel HPTLC plate. The presence of the stationary phase reduces the internal energy of the ions and limits the fragmentation.

CONCLUSIONS

HPTLC/ASAP-MS is a very fast and efficient technique for the analysis of polymers in formulated fuels. Good ionization efficiency was obtained with all investigated stationary phases.

Paraffin-Inert Atmospheric Solid Analysis Probe: A Fast and Easy Approach To Characterize Extremely Air-Sensitive Organometallic Complexes by Mass Spectrometry

Rational characterization of most organometallic compounds is hampered by their high reactivity, in particular, toward oxygen and water. Mass spectrometry experiments require physical introduction of the sample in the ionization source. So, the main challenge is to transfer air-sensitive organometallic compounds from inert atmosphere to the ionization source. In this aim, we have developed an easy technique that allows the analysis of air-sensitive compounds using the atmospheric solid analysis probe (ASAP). This method consists of a glass capillary filled with the sample (solid or liquid) and sealed by a paraffin plug to maintain the inert sample until the ionization process. It is illustrated through the structural characterization of a new highly air-sensitive dinuclear zirconium complex supported by an original switchable stilbene platform.

Atmospheric Solid Analysis Probe and Modified Desorption Electrospray Ionization Mass Spectrometry for Rapid Screening and Semi-Quantification of Zilpaterol in Urine and Tissues of Sheep

Ambient ionization mass spectrometric methods including desorption electrospray ionization (DESI) and atmospheric solid analysis probe (ASAP) have great potential for applications requiring real-time screening of target molecules in complex matrixes. Such techniques can also rapidly produce repeatable semiquantitative data, with minimal sample preparation, relative to liquid chromatography-mass spectrometry (LC-MS). In this study, a commercial ASAP probe was used to conduct both ASAP-MS and modified DESI (MDESI) MS analyses. We conducted real-time qualitative and semiquantitative analysis of the leanness-enhancing agent zilpaterol in incurred sheep urine, kidney, muscle, liver, and lung samples using ASAP-MS and MDESI MS. Using ASAP, limits of detection (LOD) and quantitation (LOQ) in urine were 1.1 and 3.7 ng/mL, respectively, while for MDESI MS they were 1.3 and 4.4 ng/mL, respectively. The LODs for tissues were 0.1-0.4 ng/g using ASAP, and 0.2-0.6 ng/g with MDESI MS. The LOQs of the tissues in ASAP were 0.4-1.2 ng/g and 0.5-2.1 ng/g in MDESI MS. Trace levels of zilpaterol were accurately analyzed in urine and tissues of sheep treated with dietary zilpaterol HCl. The correlation coefficient ( R²) between semiquantitative ASAP-MS and MDESI MS results of urine samples was 0.872. The data from ASAP and MDESI MS were validated using LC-MS/MS; urinary zilpaterol concentrations ≥5.0 ng/mL or tissue zilpaterol concentrations ≥1.5 ng/g were detected by ASAP and MDESI MS, respectively, 100% of the time. Forty samples could be analyzed in triplicate, directly from biological matrixes in under an hour.

Atmospheric Solid Analysis Probe Coupled to Ion Mobility Spectrometry-Mass Spectrometry, a Fast and Simple Method for Polyalphaolefin Characterization

Polyalphaolefins (PAOs) are polymers produced from linear alpha olefins through catalytic oligomerization processes. The PAOs are known as synthetic high-performance base stock fluids used to improve the efficiency of many other synthetic products. In this study, we report the direct characterization of PAOs using atmospheric solid analysis probe (ASAP) coupled with ion mobility spectrometry-mass spectrometry (IMS-MS). We studied different PAOs grades exhibiting low- and high-viscosity index. Specific adjustments of the ASAP source parameters permitted the monitoring of ionization processes as three mechanisms could occur for these compounds: hydride abstraction, nitrogen addition, and/or the formation of [M-2H]^+• ions. Several series of fragment ions were obtained, which allowed the identification of the alpha olefin used to synthesize the PAO. The use of the ion mobility separation dimension provides information on isomeric species. In addition, the drift time versus m/z plots permitted rapid comparison between PAO samples and to evidence their complexity. These 2D plots appear as fingerprints of PAO samples. To conclude, the resort to ASAP-IMS-MS provides a rapid characterization of the PAO samples in a direct analysis approach, without any sample preparation. Graphical Abstract ᅟ.

Analysis of air-, moisture- and solvent-sensitive chemical compounds by mass spectrometry using an inert atmospheric pressure solids analysis probe

A novel method has been developed that enables chemical compounds to be transferred from an inert atmosphere glove box and into the atmospheric pressure ion source of a mass spectrometer whilst retaining a controlled chemical environment. This innovative method is simple and cheap to implement on some commercially available mass spectrometers. We have termed this approach inert atmospheric pressure solids analysis probe ( iASAP) and demonstrate the benefit of this methodology for two air-/moisture-sensitive chemical compounds whose characterisation by mass spectrometry is now possible and easily achieved. The simplicity of the design means that moving between iASAP and standard ASAP is straightforward and quick, providing a highly flexible platform with rapid sample turnaround.

Carbon fiber brush electrode as a novel substrate for atmospheric solids analysis probe (ASAP) mass spectrometry: Electrochemical oxidation of brominated phenols

A carbon fiber brush electrode (CFBE) was newly designed and used as a substrate for both controlled potential electrolysis and atmospheric solids analysis probe (ASAP) mass spectrometry. Electropolymerized and strongly adsorbed products of electrolysis were directly desorbed and ionized from the electrode surface. Electrochemical properties of the electrode investigated by cyclic voltammetry revealed large electroactive surface area (23 ± 3 cm²) at 1.3 cm long array of carbon fibers with diameter 6-9 μm. Some products of electrochemical oxidation of pentabromophenol and 2,4,6-tribromophenol formed a compact layer on the carbon fibers and were analyzed using ASAP. Eleven new oligomeric products were identified including quinones and biphenoquinones. These compounds were not observed previously in electrolyzed solutions by liquid or gas chromatography/mass spectrometry. The thickness around 58 nm and 45 nm of the oxidation products layers deposited on carbon fibers during electrolysis of pentabromophenol and 2,4,6-tribromophenol, respectively, was estimated from atomic force microscopy analysis and confirmed by scanning electron microscopy with energy-dispersive X-ray spectroscopy measurements.

Rapid analysis of forensic-related samples using two ambient ionization techniques coupled to high-resolution mass spectrometers

RATIONALE

This paper highlights the versatility of interfacing two ambient ionization techniques, Laser Diode Thermal Desorption (LDTD) and Atmospheric Solids Analysis Probe (ASAP), to high-resolution mass spectrometers and demonstrate the method's capability to rapidly generate high-quality data from multiple sample types with minimal, if any, sample preparation.

METHODS

For ASAP-MS analysis of solid and liquid samples, the material was transferred to a capillary surface before being introduced into the mass spectrometer. For LDTD-MS analysis, samples were solvent extracted, spotted in a 96-well plate, and the solvent was evaporated before being introduced into the mass spectrometer. All analyses were performed using Atmospheric Pressure Chemical Ionization in positive mode.

RESULTS

Seven consumer "Spice" packets were combined and analyzed by both ASAP and LDTD, which identified 11 synthetic cannabinoids/cathinones by full MS and MS/MS experiments. To further show the usefulness of these techniques, black tar heroin was analyzed, which resulted in the identification of heroin and its impurities (monoacetylmorphine, papaverine, and noscapine). These experiments were performed on the LTQ-Orbitrap to demonstrate the ability to perform both parallel and serial MS and MSⁿ experiments.

CONCLUSIONS

Interfacing LDTD and ASAP to high-resolution mass spectrometers allows for expeditious analysis of a wide range of samples, with minimal or no sample preparation. Both allow for rapid full scan, MS/MS, and/or MSⁿ experiments from a single sample introduction. Published in 2017. This article is a U.S. Government work and is in the public domain in the USA.

Atmospheric solids analysis probe mass spectrometry for the rapid identification of pollens and semi-quantification of flavonoid fingerprints

RATIONALE

From allergies to plant reproduction, pollens have important impacts on the health of human and plant populations, yet identification of pollen grains remains difficult and time-consuming. Low-volatility flavonoids generated from pollens cannot be easily characterized and quantified with current analytical techniques.

METHODS

Here we present the novel use of atmospheric solids analysis probe mass spectrometry (ASAP-MS) for the characterization of flavonoids in pollens. Flavonoid patterns were generated for pollens collected from different plant types (trees and bushes) in addition to bee pollens from distinct geographic regions. Standard flavonoids (kaempferol and rhamnazin) and those produced from pollens were compared and assessed with ASAP-MS using low-energy collision MS/MS. Results for a semi-quantitative method for assessing the amount of a flavonoid in pollens are also presented.

RESULTS

Flavonoid patterns for pollen samples were distinct with variability in the number and relative abundance of flavonoids in each sample. Pollens contained 2-5 flavonoids, and all but Kochia scoparia contained kaempferol or kaempferol isomers. We establish this method as a reliable and applicable technique for analyzing low-volatility compounds with minimal sample preparation. Standard curves were generated using 0.2-5 μg of kaempferol; from these experiments, it was estimated that there is approximately 2 mg of kaempferol present in 1 g of P. nigra italica pollen.

CONCLUSIONS

Pollens can be characterized with a simple flavonoid pattern rather than analyzing the whole product pattern or the products-temperature profiles. ASAP-MS is a rapid analytical technique that can be used to distinguish between plant pollens and between bee pollens originating from different regions. Copyright © 2016 John Wiley & Sons, Ltd.

Direct screening of tobacco indicators in urine and saliva by Atmospheric Pressure Solid Analysis Probe coupled to quadrupole-time of flight mass spectrometry (ASAP-MS-Q-TOF-)

A new screening method has been explored for direct analysis of tobacco smoke biomarkers in biological matrices (i.e., saliva and urine). Single run analysis using Atmospheric pressure Solid Analysis Probe (ASAP) and high resolution mass spectrometry with quadrupole and time of flight detector has been applied directly to some biological samples (i.e., urine and saliva), providing a fast, efficient and sensitive method of identification. The method has been applied to saliva and urine samples from heavy tobacco smokers for exposure studies. Nicotine itself, nicotine metabolites (i.e., cotinine, trans-3'-hydroxycotinine, nicotine-N-glucuronide) and other related tobacco smoke toxic compounds (i.e., NNK 4-[methyl(nitroso)amino]-1-(3-pyridinyl)-1-butanone, anatabine) were found in the analyzed samples. The identification of compounds was confirmed by ultrahigh performance liquid chromatography with MS-triple quadrupole detector after sample treatment. Different temporal trends and biomarkers behavior have been found in time series related samples. Both methods are compared for screening of these biological matrices.

Thermal degradation of β-carotene studied by ion mobility atmospheric solid analysis probe mass spectrometry: full product pattern and selective ionization enhancement

Atmospheric solid analysis probe mass spectrometry has the capability of capturing full product patterns simultaneously including both volatile and semi-volatile compounds produced at elevated temperatures. Real-time low-energy collision-induced fragmentation combined with ion mobility separations enables rapid identification of the chemical structures of products. We present here for the first time the recognition of full product patterns resulting from the thermal degradation of β-carotene at temperatures up to 600 °C. Solvent vapor-induced ionization enhancement is observed, which reveals parallel thermal dissociation processes that lead to even- and odd-numbered mass products. The drift-time distributions of high mass products, along with β-carotene, were monitored with temperature, showing multiple conformations that are associated with the presence of two β-rings. Products of masses 346/347, however, show a single conformation distribution, which indicates the separation of two β-rings resulting from the direct bond scission at the polyene hydrocarbon chain. The thermal degradation pathways are evaluated and discussed.

Plasma-based ambient mass spectrometry techniques: The current status and future prospective

Plasma-based ambient mass spectrometry is emerging as a frontier technology for direct analysis of sample that employs low-energy plasma as the ionization reagent. The versatile sources of ambient mass spectrometry (MS) can be classified according to the plasma formation approaches; namely, corona discharge, glow discharge, dielectric barrier discharge, and microwave-induced discharge. These techniques allow pretreatment-free detection of samples, ranging from biological materials (e.g., flies, bacteria, plants, tissues, peptides, metabolites, and lipids) to pharmaceuticals, food-stuffs, polymers, chemical warfare reagents, and daily-use chemicals. In most cases, plasma-based ambient MS performs well as a qualitative tool and as an analyzer for semi-quantitation. Herein, we provide an overview of the key concepts, mechanisms, and applications of plasma-based ambient MS techniques, and discuss the challenges and outlook.

A new oligo(hexafluoropropylene oxide)-b-oligo(ethylene oxide) diblock surfactant obtained by radical reactions

The synthesis and characterization of a new oligo(hexafluoropropylene oxide)-b-oligo(ethylene oxide), oligo(HFPO)-b-oligo(PEG), diblock co-oligomer are presented.

Rapid identification of polymer additives by atmospheric solid analysis probe with quadrupole time-of-flight mass spectrometry

RATIONALE

A method using an atmospheric solid analysis probe (ASAP) combined with quadrupole time-of-flight mass spectrometry (QTOFMS) assisted by a pre-built MS library was found to be efficient in fast and direct analysis of additives for polymers. By this method, sample pretreatment could be eliminated from the additives identification process.

METHODS

Some crucial parameters, such as desolvation gas temperature, corona current, sample cone voltage and collision energy, should be optimized. A MS library of 100 polymer additives, including phenols (Irganox 1010, Irganox 1076), hydroxyl phenyl benzotriazole derivatives (Tinuvin 326, Tinuvin 327, Tinuvin 328), hindered amines (Tinuvin 944, Tinuvin 770) and plasticizers, was built based on the optimized conditions. To verify the application of the MS library, the ASAP-QTOFMS method was applied to identify complex additives, a simulated polypropylene (PP) sample and a real polymethylmethacrylate (PMMA) sample purchased from a local market.

RESULTS

By searching the exact mass, and comparing the MS and MS/MS spectra of samples with standards in the MS library, complex additives such as Irganox GX 2921, as well as additives in PP and PMMA samples, could be identified quickly and easily. The determination of mass accuracy increased the confidence of peak identification as well. Moreover, the results also provided information of the characterization for PP and PMMA polymers.

CONCLUSIONS

A rapid identification method has been developed for polymer additives by ASAP-QTOFMS. A MS library of 100 polymer additives was built by this method. Using ASAP-QTOFMS assisted by the pre-built MS library, polymer additives can be quickly identified. This method was found to be a promising tool in the rapid analysis of additives in polymers and polymer matrices.

Modification of a gas chromatography/atmospheric pressure chemical ionisation time-of-flight mass spectrometer as an alternative to automated atmospheric pressure solids analysis probe

RATIONALE

The atmospheric pressure solids analysis probe (ASAP) has been successfully introduced into laboratories as a routine analytical tool but the technique is labour-intensive and is not easily automated. This paper describes the modifications made to an existing atmospheric pressure gas chromatography (APGC) system to enable the automated analysis of samples that would have otherwise been analysed by ASAP.

METHODS

Liquid samples were injected into a 1 m piece of fused silica guard column using a standard split/splitless gas chromatography (GC) inlet, oven and autosampler. A novel timing delay circuit was developed and integrated into the system to control acquisition start times and a bespoke heating block/calibrant delivery system was used to transport either the calibration or reference compound into the ionisation source.

RESULTS

The modified system has allowed the successful analysis of those samples requiring ASAP to be carried out in a fully automated manner using APGc. The analysis is rapid and can be carried out in less than 2 min. The results obtained are directly comparable with those obtained by ASAP. A typical mass accuracy of better than 5 mm/z units was achieved, allowing the molecules to be identified based on their elemental formulae.

CONCLUSIONS

An existing APGC system has been successfully modified and is suitable for the automatic analysis of samples normally analysed by ASAP. The APGC instrument incorporates the use of a novel reference compound and delivery system which allows accurate mass measurements to be performed. This and the other modifications described have allowed the technique to be incorporated into an existing suite of mass spectrometry-based experiments for use in the characterisation of organic molecules.

Characterizing synthetic polymers and additives using new ionization methods for mass spectrometry

RATIONALE

New inlet and vacuum ionization methods provide advantages of specificity, simplicity and speed for the analysis of synthetic polymers and polymer additives directly from surfaces such as fibers using mass spectrometry (MS) on different commercial mass spectrometers (Waters SYNAPT G2, Thermo LTQ Velos).

METHODS

We compare inlet ionization methods with the recently discovered vacuum ionization method. This method, termed matrix assisted ionization vacuum (MAIV), utilizes the matrix 3-nitrobenzonitrile (3-NBN) for the analysis of synthetic polymers and additives without additional energy input by simply exposing the matrix:analyte:salt to the vacuum of the mass spectrometer. Matrix:analyte:salt samples can be introduced while dry (surfaces, e.g. glass slides, pipet tips) or slightly wet (e.g. filter paper, pipet tips).

RESULTS

Compounds ionized by these methods can be analyzed in both positive and negative detection modes through cationization or deprotonation, respectively. The dynamic range of the experiment can be enhanced, as well as structural analysis performed, by coupling the vacuum ionization method with ion mobility spectrometry mass spectrometry (IMS-MS) and tandem mass spectrometric (MS/MS) fragmentation.

CONCLUSIONS

The specificity of 3-NBN matrix to ionize small and large nonvolatile analyte molecules by MAIV makes this matrix a good choice for observing low-abundance additives in the presence of large amounts of synthetic polymer using MS.

Rapid analysis of polyester and polyethylene blends by ion mobility-mass spectrometry

In this work ion mobility-mass spectrometry (IM-MS) coupled to an atmospheric solid analysis probe (ASAP) was used for the characterization of polymer blends involving biodegradable polymers (poly(lactic acid) (PLA), poly(butylene succinate) (PBS)) and poly(ethylene) (PE).