A nanoscale graphene oxide-peptide biosensor for real-time specific biomarker detection on the cell surface

Photodynamic therapy of cancer using graphene nanomaterials

INTRODUCTION

High incidence and fatality rates of cancer remain a global challenge. The success of conventional treatment modalities is being questioned on account of adverse effects. Photodynamic therapy (PDT) is a potential alternative. It utilizes a combination of photosensitizer (PS), light and oxygen to target the tissues locally, thereby minimizing the damage to neighboring healthy tissues. Conventional PSs suffer from poor selectivity, high hydrophobicity and sub-optimal yield of active radicals. Graphene nanomaterials (GNs) exhibit interesting particulate and photophysical properties in the context of their use in PDT.

AREA COVERED

We focus on describing the mechanistic aspects of PDT-mediated elimination of cancer cells and the subsequent development of adaptive immunity. After covering up-to-date literature on the significant enhancement of PDT capability with GNs, we have discussed the probability of combining PDT with chemo-, immuno-, and photothermal therapy to make the treatment more effective.

EXPERT OPINION

GNs can be synthesized in various size ranges, and their biocompatibility can be improved through surface functionalization and doping. These can be used as PS to generate ROS or conjugated with other PS molecules for treating deep-seated tumors. With increasing evidence on biosafety, such materials offer hope as antitumor therapeutics.

In vivo tracking of toxic diesel particulate matter in mice using radiolabeling and nuclear imaging

Exposure to diesel particulate matter (DPM) is associated with several adverse health effects, including severe respiratory diseases. Quantitative analysis of DPM in vivo can provide important information on the behavior of harmful chemicals, as well as their toxicological impacts in living subjects. This study presents whole-body images and tissue distributions of DPM in animal models, using molecular imaging and radiolabeling techniques. The self-assembly of the ⁸⁹Zr-labeled pyrene analog with a suspension of DPM efficiently produced ⁸⁹Zr-incorporated DPM (⁸⁹Zr-DPM). Positron emission tomography images were obtained for mice exposed to ⁸⁹Zr-DPM via three administration routes: intratracheal, oral, and intravenous injection. DPM was largely distributed in the lungs and only slowly cleared after 7 days in mice exposed via the intratracheal route. In addition, a portion of ⁸⁹Zr-DPM was translocated to other organs, such as the heart, spleen, and liver. Uptake values in these organs were also noticeable following exposure via the intravenous route. In contrast, most of the orally administered DPM was excreted quickly within a day. These results suggest that continuous inhalation exposure to DPM causes serious lung damage and may cause toxic effects in the extrapulmonary organs.

Graphene-Based Biosensors for Molecular Chronic Inflammatory Disease Biomarker Detection

Chronic inflammatory diseases, such as cancer, diabetes mellitus, stroke, ischemic heart diseases, neurodegenerative conditions, and COVID-19 have had a high number of deaths worldwide in recent years. The accurate detection of the biomarkers for chronic inflammatory diseases can significantly improve diagnosis, as well as therapy and clinical care in patients. Graphene derivative materials (GDMs), such as pristine graphene (G), graphene oxide (GO), and reduced graphene oxide (rGO), have shown tremendous benefits for biosensing and in the development of novel biosensor devices. GDMs exhibit excellent chemical, electrical and mechanical properties, good biocompatibility, and the facility of surface modification for biomolecular recognition, opening new opportunities for simple, accurate, and sensitive detection of biomarkers. This review shows the recent advances, properties, and potentialities of GDMs for developing robust biosensors. We show the main electrochemical and optical-sensing methods based on GDMs, as well as their design and manufacture in order to integrate them into robust, wearable, remote, and smart biosensors devices. We also describe the current application of such methods and technologies for the biosensing of chronic disease biomarkers. We also describe the current application of such methods and technologies for the biosensing of chronic disease biomarkers with improved sensitivity, reaching limits of detection from the nano to atto range concentration.

Graphene Based Nanohybrid Aptasensors in Environmental Monitoring: Concepts, Design and Future Outlook

In view of ever-increasing environmental pollution, there is an immediate requirement to promote cheap, multiplexed, sensitive and fast biosensing systems to monitor these pollutants or contaminants. Aptamers have shown numerous advantages in being used as molecular recognition elements in various biosensing devices. Graphene and graphene-based materials/nanohybrids combined with several detection methods exhibit great potential owing to their exceptional optical, electronic and physicochemical properties which can be employed extensively to monitor environmental contaminants. For environmental monitoring applications, aptamers have been successfully combined with graphene-based nanohybrids to produce a wide range of innovative methodologies. Aptamers are immobilized at the surface of graphene based nanohybrids via covalent and non-covalent strategies. This review highlights the design, working principle, recent developmental advances and applications of graphene based nanohybrid aptasensors (GNH-Apts) (since January 2014 to September 2021) with a special emphasis on two major signal-transduction methods, i.e., optical and electrochemical for the monitoring of pesticides, heavy metals, bacteria, antibiotics, and organic compounds from different environmental samples (e.g., water, soil and related). Lastly, the challenges confronted by scientists and the possible future outlook have also been addressed. It is expected that high-performance graphene-based nanohybrid aptasensors would find broad applications in the field of environmental monitoring.

Graphene Oxide of Extra High Oxidation: A Wafer for Loading Guest Molecules

We present a new modification of graphene oxide with very high content (85 wt %) of oxygen-containing functional groups (hydroxy, epoxy, lactol, carboxyl, and carbonyl groups) that forms stable aqueous dispersion in up to 9 g·L^-1 concentration solutions. A novel faster method of the synthesis is described that produces up to 1 kg of the material and allows controlling the particle size in solution. The synthesized compound was characterized by various physicochemical methods and molecular dynamics modeling, revealing a unique structure in the form of a multilayered wafer of several sheets thick, where each sheet is highly corrugated. The ragged structure of the sheets forms pockets with hindered mobility of water that leads to the possibility of trapping guest molecules.

Peptide Conjugate on Multilayer Graphene Oxide Film for the Osteogenic Differentiation of Human Wharton's Jelly-Derived Mesenchymal Stem Cells

Graphene oxide (GO) is extensively studied as a template material for mesenchymal stem cell application due to its two-dimensional nature and unique functionalization chemistries. Herein, a new type of peptide-conjugated multilayer graphene oxide (peptide/m-GO film) was fabricated and used as biomaterial for culturing human Wharton's jelly-derived mesenchymal stem cells (WJ-MSCs). The characterization of the peptide/m-GO films was performed, and the biocompatibility of the WJ-MSCs on the peptide/m-GO films was investigated. The results demonstrated that the peptide conjugate on the m-GO film did not hamper the normal growth of WJ-MSCs but supported the growth of WJ-MSCs after the 6-day culture period. In addition, the osteogenic differentiation of WJ-MSCs on the peptide/m-GO films was enhanced as compared with the parent m-GO film. Therefore, such peptide-conjugated m-GO films could provide a highly biocompatible and multifunctional 2D material to tailor the potential application of WJ-MSCs in bone tissue regeneration.

Functionalization of Metal and Carbon Nanoparticles with Potential in Cancer Theranostics

Cancer theranostics is a new concept of medical approach that attempts to combine in a unique nanoplatform diagnosis, monitoring and therapy so as to provide eradication of a solid tumor in a non-invasive fashion. There are many available solutions to tackle cancer using theranostic agents such as photothermal therapy (PTT) and photodynamic therapy (PDT) under the guidance of imaging techniques (e.g., magnetic resonance-MRI, photoacoustic-PA or computed tomography-CT imaging). Additionally, there are several potential theranostic nanoplatforms able to combine diagnosis and therapy at once, such as gold nanoparticles (GNPs), graphene oxide (GO), superparamagnetic iron oxide nanoparticles (SPIONs) and carbon nanodots (CDs). Currently, surface functionalization of these nanoplatforms is an extremely useful protocol for effectively tuning their structures, interface features and physicochemical properties. This approach is much more reliable and amenable to fine adjustment, reaching both physicochemical and regulatory requirements as a function of the specific field of application. Here, we summarize and compare the most promising metal- and carbon-based theranostic tools reported as potential candidates in precision cancer theranostics. We focused our review on the latest developments in surface functionalization strategies for these nanosystems, or hybrid nanocomposites consisting of their combination, and discuss their main characteristics and potential applications in precision cancer medicine.

Immobilization of horseradish peroxidase on cationic microporous starch: Physico-bio-chemical characterization and removal of phenolic compounds

In the present study, two different modified starches; microporous starch (MPS) and cationic microporous starch (CMPS) were synthesized. The granules of MPS that distributed regularly were destroyed after the etherification reaction. The data depicted that the immobilization of horseradish peroxidase (HRP) on CMPS revealed highest immobilization efficiency (86%) at 100 mg of CMPS at pH = 6.0 and 100 units of enzyme. After 10 reuses of the CMPS-HRP, it retained 66% of initial activity. The soluble HRP showed broad pH optimum of 6.0-7.0, which changed to sharp pH = 6.0 for CMPS-HRP. Soluble-HRP and CMPS-HRP showed temperature optima at 30 °C and 40 °C, respectively. The CMPS-HRP showed high thermal stability up to 50 °C compared to the soluble HRP (40 °C). The Km values of soluble HRP and CMPS-HRP were 6.6 and 10.8 mM for H₂O₂ and 34 and 41.6 mM for guaiacol, respectively. CMPS-HRP showed higher affinity toward various substrates than the soluble-HRP. CMPS-HRP showed more resistance against heavy metals, urea, isopropanol, Triton X-100 and trypsin than soluble enzyme. The CMPS-HRP showed higher ability to remove phenol and p-chlorophenol compared to soluble-HRP.

Carbon-based nanomaterials for targeted cancer nanotherapy: recent trends and future prospects

Carbon-based nanomaterials are becoming attractive materials due to their unique structural dimensions and promising mechanical, electrical, thermal, optical and chemical characteristics. Carbon nanotubes, graphene, graphene oxide, carbon and graphene quantum dots have numerous applications in diverse areas, including biosensing, drug/gene delivery, tissue engineering, imaging, regenerative medicine, diagnosis, and cancer therapy. Cancer remains one of the major health problems all over the world, and several therapeutic approaches are focussed on designing targeted anticancer drug delivery nanosystems by applying benign and less hazardous resources with high biocompatibility, ease of functionalization, remarkable targeted therapy issues, and low adverse effects. This review highlights the recent development on these carbon based-nanomaterials in the field of targeted cancer therapy and discusses their possible and promising diagnostic and therapeutic applications for the treatment of cancers.

Graphene Oxide-Based Nanomaterials: An Insight into Retinal Prosthesis

Retinal prosthesis has recently emerged as a treatment strategy for retinopathies, providing excellent assistance in the treatment of age-related macular degeneration (AMD) and retinitis pigmentosa. The potential application of graphene oxide (GO), a highly biocompatible nanomaterial with superior physicochemical properties, in the fabrication of electrodes for retinal prosthesis, is reviewed in this article. This review integrates insights from biological medicine and nanotechnology, with electronic and electrical engineering technological breakthroughs, and aims to highlight innovative objectives in developing biomedical applications of retinal prosthesis.

Applications of Two-Dimensional Nanomaterials in Breast Cancer Theranostics

Breast cancer is the leading cause of cancer-related mortality among women. Early stage diagnosis and treatment of this cancer are crucial to patients' survival. In addition, it is important to avoid severe side effects during the process of conventional treatments (surgery, chemotherapy, hormonal therapy, and targeted therapy) and increase the patients' quality of life. Over the past decade, nanomaterials of all kinds have shown excellent prospects in different aspects of oncology. Among them, two-dimensional (2D) nanomaterials are unique due to their physical and chemical properties. The functional variability of 2D nanomaterials stems from their large specific surface area as well as the diversity of composition, electronic configurations, interlayer forces, surface functionalities, and charges. In this review, the current status of 2D nanomaterials in breast cancer diagnosis and therapy is reviewed. In this respect, sensing of the tumor biomarkers, imaging, therapy, and theranostics are discussed. The ever-growing 2D nanomaterials are building blocks for the development of a myriad of nanotheranostics. Accordingly, there is the possibility to explore yet novel properties, biological effects, and oncological applications.

Supramolecular fluorogenic peptide sensor array based on graphene oxide for the differential sensing of ebola virus

Principal component analysis of a fluorescent supramolecular sensor array based on graphene oxide can be used to differentiate ebola virus from marburg virus and receptor-extensive vesicular stomatitis virus.

Amidrazone modified acrylic fabric activated with cyanuric chloride: A novel and efficient support for horseradish peroxidase immobilization and phenol removal

In this study, hydrazine treated acrylic fabrics (polyacrylonitrile, PAN) activated with cyanuric chloride was developed as supporting material for horseradish peroxidase (HRP) immobilization. The immobilization of HRP onto the modified supporting material was achieved after being end-over-end incubated for 12 h. Field emission scanning electron microscopy and Fourier-transform infrared spectroscopy techniques were used to confirm the successful immobilization. Reusability experiment was performed to estimate the ability of the immobilized HRP to recover the reaction medium, in which it was observed to retain 78% of its original activity after 10 cycles. Relative to the soluble HRP, the optimum pH and temperature for the immobilized HRP were shifted to 7-7.5 and 50 °C, respectively. The kinetic parameters of guaiacol and H₂O₂ for the immobilized HRP were determined to be Km/Vmax = 57.61, 11.35 and Kcat/Km = 1.87, 1.86, respectively, while the values for the free form were Km/Vmax = 41.49, 6.23 and Kcat/Km = 1.87, 1.86, respectively. Compared to the soluble form, the immobilized HRP exhibited higher resistance toward metal ions and some organic solvents. For an application perspective. The immobilization of HRP using this procedure has the potential to be used for industrial application and wastewater treatment.

Electric Field-Induced Chemical Surface-Enhanced Raman Spectroscopy Enhancement from Aligned Peptide Nanotube-Graphene Oxide Templates for Universal Trace Detection of Biomolecules

Semiconductor-graphene oxide-based surface-enhanced Raman spectroscopy substrates represent a new frontier in the field of surface-enhanced Raman spectroscopy (SERS). However, the application of graphene oxide has had limited success because of the poor Raman enhancement factors that are achievable in comparison to noble metals. In this work, we report chemical SERS enhancement enabled by the application of an electric field (10-25 V/mm) to aligned semiconducting peptide nanotube-graphene oxide composite structures during Raman measurements. The technique enables nanomolar detection sensitivity of glucose and nucleobases with up to 10-fold signal enhancement compared to metal-based substrates, which, to our knowledge, is higher than that previously reported for semiconductor-based SERS substrates. The increased Raman scattering is assigned to enhanced charge-transfer resonance enabled by work function lowering of the peptide nanotubes. These results provide insight into how semiconductor organic peptide nanotubes interact with graphene oxide, which may facilitate chemical biosensing, electronic devices, and energy-harvesting applications.

Graphene Nanomaterials-Based Radio-Frequency/Microwave Biosensors for Biomaterials Detection

In this paper, the advances in radio-frequency (RF)/microwave biosensors based on graphene nanomaterials including graphene, graphene oxide (GO), and reduced graphene oxide (rGO) are reviewed. From a few frontier studies, recently developed graphene nanomaterials-based RF/microwave biosensors are examined in-depth and discussed. Finally, the prospects and challenges of the next-generation RF/microwave biosensors for wireless biomedical applications are proposed.

Biomedical Applications of Graphene-Based Structures

Graphene and graphene oxide (GO) structures and their reduced forms, e.g., GO paper and partially or fully reduced three-dimensional (3D) aerogels, are at the forefront of materials design for extensive biomedical applications that allow for the proliferation and differentiation/maturation of cells, drug delivery, and anticancer therapies. Various viability tests that have been conducted in vitro on human cells and in vivo on mice reveal very promising results, which make graphene-based materials suitable for real-life applications. In this review, we will give an overview of the latest studies that utilize graphene-based structures and their composites in biological applications and show how the biomimetic behavior of these materials can be a step forward in bridging the gap between nature and synthetically designed graphene-based nanomaterials.

Carbon Nanomaterials in Optical Detection

Owing to their unique optical, electronic, mechanical, and chemical properties, flexible chemical modification, large surface coverage and ready cellular uptake, various carbon nanomaterials such as carbon nanotubes (CNTs), graphene and its derivatives, carbon dots (CDs), graphene quantum dots, fullerenes, carbon nanohorns (CNHs) and carbon nano-onions (CNOs), have been widely explored for use in optical detection. Most of them are based on fluorescence changes. In this chapter, we will focus on carbon nanomaterials-based optical detection applications, mainly including fluorescence sensing and bio-imaging. Moreover, perspectives on future exploration of carbon nanomaterials for optical detection are also given.

Developing Graphene-Based Nanohybrids for Electrochemical Sensing

Graphene-based nanohybrid is considered to be the most promising nanomaterial for electrochemical sensing applications due to the defects created on the graphene oxide layers. These defects provide graphene oxide unique properties, such as excellent conductivity, large specific surface area, and electrocatalytic activity. These unique properties encourage scientists to develop novel graphene-based nanohybrids and improve the sensing efficiency. This review, therefore, addresses this topic by comprehensively discussing the strategies to fabricate novel graphene based nanohybrids with high sensitivity. The combinations of graphene with various nanomaterials, such as metal nanoclusters, metal compound nanoparticles, carbon materials, polymers and peptides, in the direction of electrochemical sensing, were systematically analyzed. Meanwhile, the challenges in the functional design and application of graphene-based nanohybrids were described and the reasonable solutions were proposed.

Graphene and its derivatives as biomedical materials: future prospects and challenges

Graphene and its derivatives possess some intriguing properties, which generates tremendous interests in various fields, including biomedicine. The biomedical applications of graphene-based nanomaterials have attracted great interests over the last decade, and several groups have started working on this field around the globe. Because of the excellent biocompatibility, solubility and selectivity, graphene and its derivatives have shown great potential as biosensing and bio-imaging materials. Also, due to some unique physico-chemical properties of graphene and its derivatives, such as large surface area, high purity, good bio-functionalizability, easy solubility, high drug loading capacity, capability of easy cell membrane penetration, etc., graphene-based nanomaterials become promising candidates for bio-delivery carriers. Besides, graphene and its derivatives have also shown interesting applications in the fields of cell-culture, cell-growth and tissue engineering. In this article, a comprehensive review on the applications of graphene and its derivatives as biomedical materials has been presented. The unique properties of graphene and its derivatives (such as graphene oxide, reduced graphene oxide, graphane, graphone, graphyne, graphdiyne, fluorographene and their doped versions) have been discussed, followed by discussions on the recent efforts on the applications of graphene and its derivatives in biosensing, bio-imaging, drug delivery and therapy, cell culture, tissue engineering and cell growth. Also, the challenges involved in the use of graphene and its derivatives as biomedical materials are discussed briefly, followed by the future perspectives of the use of graphene-based nanomaterials in bio-applications. The review will provide an outlook to the applications of graphene and its derivatives, and may open up new horizons to inspire broader interests across various disciplines.

Stable nanoconjugates of transferrin with alloyed quaternary nanocrystals Ag-In-Zn-S as a biological entity for tumor recognition

One way to limit the negative effects of anti-tumor drugs on healthy cells is targeted therapy employing functionalized drug carriers. Here we present a biocompatible and stable nanoconjugate of transferrin anchored to Ag-In-Zn-S quantum dots modified with 11-mercaptoundecanoic acid (Tf-QD) as a drug carrier versus typical anticancer drug, doxorubicin. Detailed investigations of Tf-QD nanoconjugates without and with doxorubicin by fluorescence studies and cytotoxic measurements showed that the biological activity of both the transferrin and doxorubicin was fully retained in the nanoconjugate. In particular, the intercalation capabilities of free doxorubicin versus ctDNA remained essentially intact upon its binding to the nanoconjugate. In order to evaluate these capabilities, we studied the binding constant of doxorubicin attached to Tf-QDs with ctDNA as well as the binding site size on the ctDNA molecule. The binding constant slightly decreased compared to that of free doxorubicin while the binding site size, describing the number of consecutive DNA lattice residues involved in the binding, increased. It was also demonstrated that the QDs alone and in the form of a nanoconjugate with Tf were not cytotoxic towards human non-small cell lung carcinoma (H460 cell line) and the tumor cell sensitivity of the DOX-Tf-QD nanoconjugate was comparable to that of doxorubicin alone.

A turn-on fluorescent sensor for Hg2+ detection based on graphene oxide and DNA aptamers

Hg²⁺-Induced conformational change of DNA aptamers can cause the release of AO from GO surface, which leads to fluorescence recovery.

Homogenous graphene oxide-peptide nanofiber hybrid hydrogel as biomimetic polysaccharide hydrolase

Cellulose, an impressive potential sustainable fuel, is difficult to hydrolyze because of the protection of β-1,4-glycosidic bonds through the tight hydrogen bonding network. In this study, homogenous graphene oxide (GO)-peptide nanofiber hybrid hydrogels (GO-PNFs) were designed as a β-glycosyl hydrolase mimetic to achieve efficient degradation of cellobiose and cellopentaose. For comparison, free peptides, graphene oxide mixed with free peptides (GO-peptdies) and self-assembled peptide nanofibers (PNFs) were also studied for their activity as a hydrolase mimetics for degradation of cellobiose. Among these materials, GO-PNFs showed the highest hydrolysis activity. Transmission electron microscopy, atomic force microscopy, fluorescence analysis, circular dichroism spectroscopies, X-ray diffraction, Raman spectra and computational modeling were used to interpret the difference in activity mechanism in these artificially designed enzymes. These investigations suggested that high catalytic performance of GO-PNFs toward cellobiose and cellopentaose hydrolysis could be attributed to the formation of nanofiber structures of peptides, optimal molecular conformation and less steric hindrance to access the substrate. More importantly, GO not only served as a platform for attaching PNFs, but also created a hydrophobic microenvironment and facilitated proton transfer, an essential step in catalytic hydrolysis, thus enhancing catalytic activity. All these provided insights into the potential use of peptides and GO hybrid composite nanoenzymes in efficient cellulose hydrolysis.

Designed graphene-peptide nanocomposites for biosensor applications: A review

The modification of graphene with biomacromolecules like DNA, protein, peptide, and others extends the potential applications of graphene materials in various fields. The bound biomacromolecules could improve the biocompatibility and bio-recognition ability of graphene-based nanocomposites, therefore could greatly enhance their biosensing performances on both selectivity and sensitivity. In this review, we presented a comprehensive introduction and discussion on recent advance in the synthesis and biosensor applications of graphene-peptide nanocomposites. The biofunctionalization of graphene with specifically designed peptides, and the synthesis strategies of graphene-peptide (monomer, nanofibrils, and nanotubes) nanocomposites were demonstrated. On the other hand, the fabrication of graphene-peptide nanocomposite based biosensor architectures for electrochemical, fluorescent, electronic, and spectroscopic biosensing were further presented. This review includes nearly all the studies on the fabrication and applications of graphene-peptide based biosensors recently, which will promote the future developments of graphene-based biosensors in biomedical detection and environmental analysis.

GPCR Activation and Endocytosis Induced by a 2D Material Agonist

Agonist-induced activation and endocytosis of G protein-coupled receptors (GPCRs) are crucial for a number of physiological and pathological processes. However, tools that are available for probing GPCR endocytosis have been insufficient. Here, we developed a two-dimensional (2D) material agonist by supramolecular self-assembly between an endogenous agonist of κ-opioid receptor (KOR) and 2D molybdenum disulfide. The 2D material agonist has proven to be amenable for eliciting GPCR activation and endocytosis in cells stably expressing KOR rather than in those without KOR expression. Using super-resolution microscopy, we also show that the 2D material agonist colocalizes well with GFP-fused KOR intracellularly. Further, the endocytosed 2D material agonist can selectively produce reactive oxygen species in cells that overly express KOR, as controlled by light irradiation.

Thermal and aqueous stability improvement of graphene oxide enhanced diphenylalanine nanocomposites

Nanocomposites of diphenylalanine (FF) and carbon based materials provide an opportunity to overcome drawbacks associated with using FF micro- and nanostructures in nanobiotechnology applications, in particular their poor structural stability in liquid solutions. In this study, FF/graphene oxide (GO) composites were found to self-assemble into layered micro- and nanostructures, which exhibited improved thermal and aqueous stability. Dependent on the FF/GO ratio, the solubility of these structures was reduced to 35.65% after 30 min as compared to 92.4% for pure FF samples. Such functional nanocomposites may extend the use of FF structures to e.g. biosensing, electrochemical, electromechanical or electronic applications.

An end-point method based on graphene oxide for RNase H analysis and inhibitors screening

As a highly conserved damage repair protein, RNase H can hydrolysis DNA-RNA heteroduplex endonucleolytically and cleave RNA-DNA junctions as well. In this study, we have developed an accurate and sensitive RNase H assay based on fluorophore-labeled chimeric substrate hydrolysis and the differential affinity of graphene oxide on RNA strand with different length. This end-point measurement method can detect RNase H in a range of 0.01 to 1 units /mL with a detection limit of 5.0×10^-3 units/ mL under optimal conditions. We demonstrate the utility of the assay by screening antibiotics, resulting in the identification of gentamycin, streptomycin and kanamycin as inhibitors with IC₅₀ of 60±5µM, 70±8µM and 300±20µM, respectively. Furthermore, the assay was reliably used to detect RNase H in complicated biosamples and found that RNase H activity in tumor cells was inhibited by gentamycin and streptomycin sulfate in a concentration-dependent manner. The average level of RNase H in serums of HBV infection group was similar to that of control group. In summary, the assay provides an alternative tool for biochemical analysis for this enzyme and indicates the feasibility of high throughput screening inhibitors of RNase H in vitro and in vivo.

Graphene-based nanomaterials for bioimaging

Graphene-based nanomaterials, due to their unique physicochemical properties, versatile surface functionalization, ultra-high surface area, and good biocompatibility, have attracted considerable interest in biomedical applications such as biosensors, drug delivery, bioimaging, theranostics, and so on. In this review, we will summarize the current advances in bioimaging of graphene-based nanomaterials, including graphene, graphene oxide (GO), reduced graphene oxide (rGO), graphene quantum dots (GQDs), and their derivatives. There are two methods to synthesize graphene-based nanomaterials: in situ synthesis and binding method. We will highlight the molecular imaging modalities including optical imaging (fluorescence (FL), two-photon FL, and Raman imaging), PET/SPECT (positron emission tomography/single photon emission computed tomography), MRI (magnetic resonance imaging), PAI (photoacoustic imaging), CT (computed tomography), and multimodal imaging. In the end, we will elaborate on the prospects and challenges of their future bioimaging applications.

Red blood cell membrane-mediated fusion of hydrophobic quantum dots with living cell membranes for cell imaging

Nanoparticle fusion with cell membranes is an interesting phenomenon that may have crucial implications for their biomedical applications. Here, we proposed a biomimetic and controlled route to fusion of hydrophobic quantum dots (QDs) with the cell membranes of living cells, while preserving their sensing and optical properties and thus their capability of membrane imaging and single-nanoparticle tracking. Red blood cell (RBC) membrane lipids were extracted to phase transfer hydrophobic QDs and the resulting RBC-encapsulated QDs (RBC-QDs) can be well fused within cell membranes as membrane markers. The fusion was validated through single-nanoparticle imaging and different movement behaviours were reliably discriminated. RBC-QDs possessed some novel features, such as controllable selective membrane staining, no invasion, and high photobleaching resistance, which allowed for long-term imaging, and single-nanoparticle tracking. This approach provides a versatile platform for controlled hydrophobic QD-based fluorescence investigation of living cell membranes.

A review on electronic bio-sensing approaches based on non-antibody recognition elements

In this review, recent advances in the development of electronic detection methodologies based on non-antibody recognition elements such as functional liposomes, aptamers and synthetic peptides are discussed. Particularly, we highlight the progress of field effect transistor (FET) sensing platforms where possible as the number of publications on FET-based platforms has increased rapidly. Biosensors involving antibody-antigen interactions have been widely applied in diagnostics and healthcare in virtue of their superior selectivity and sensitivity, which can be attributed to their high binding affinity and extraordinary specificity, respectively. However, antibodies typically suffer from fragile and complicated functional structures, large molecular size and sophisticated preparation approaches (resource-intensive and time-consuming), resulting in limitations such as short shelf-life, insufficient stability and poor reproducibility. Recently, bio-sensing approaches based on synthetic elements have been intensively explored. In contrast to existing reports, this review provides a comprehensive overview of recent advances in the development of biosensors utilizing synthetic recognition elements and a detailed comparison of their assay performances. Therefore, this review would serve as a good summary of the efforts for the development of electronic bio-sensing approaches involving synthetic recognition elements.

Graphene: The Missing Piece for Cancer Diagnosis?

This paper reviews recent advances in graphene-based biosensors development in order to obtain smaller and more portable devices with better performance for earlier cancer detection. In fact, the potential of Graphene for sensitive detection and chemical/biological free-label applications results from its exceptional physicochemical properties such as high electrical and thermal conductivity, aspect-ratio, optical transparency and remarkable mechanical and chemical stability. Herein we start by providing a general overview of the types of graphene and its derivatives, briefly describing the synthesis procedure and main properties. It follows the reference to different routes to engineer the graphene surface for sensing applications with organic biomolecules and nanoparticles for the development of advanced biosensing platforms able to detect/quantify the characteristic cancer biomolecules in biological fluids or overexpressed on cancerous cells surface with elevated sensitivity, selectivity and stability. We then describe the application of graphene in optical imaging methods such as photoluminescence and Raman imaging, electrochemical sensors for enzymatic biosensing, DNA sensing, and immunosensing. The bioquantification of cancer biomarkers and cells is finally discussed, particularly electrochemical methods such as voltammetry and amperometry which are generally adopted transducing techniques for the development of graphene based sensors for biosensing due to their simplicity, high sensitivity and low-cost. To close, we discuss the major challenges that graphene based biosensors must overcome in order to reach the necessary standards for the early detection of cancer biomarkers by providing reliable information about the patient disease stage.

Applications of graphene and its derivatives in intracellular biosensing and bioimaging

Graphene has a unique planar structure, as well as excellent electronic properties, and has attracted a great deal of interest from scientists.

DNA directed immobilization enzyme on polyamidoamine tethered magnetic composites with high reusability and stability

A novel enzyme immobilization procedure was developed. The immobilized enzyme composites exhibited significantly improved digestion performance, excellent reusability, stability and dynamic reversible reproducibility.

Luminescence turn-on/off sensing of biological iron by carbon dots in transferrin

Iron is a key nutrient as well as a potential toxin for almost all living organisms. In mammalian cells, serum transferrin (Tf) is responsible for iron transport and its iron overload/deficiency causes various diseases. Therefore, closely regulated iron homeostasis is extremely essential for cellular metabolism. In the present article we report the pH-dependent luminescence turn-on/off sensing of bound Fe(3+) ions of serum Tf by carbon dots (CDs) with the help of photoluminescence (PL) spectroscopy, FTIR spectroscopy, dynamic light scattering (DLS), circular dichroism (CD) and PL imaging techniques. At physiological pH (7.4), the intrinsic luminescence of CDs gets quenched in the presence of Tf as a consequence of ground-state association, which is driven by favorable electrostatic interactions between negatively charged CDs (-25.45 ± 1.23 mV) and positively charged Fe(3+) ions of Tf. The estimated detection limit of Tf by CDs at physiological pH is found to be 1.82 μM (signal-to-noise ratio of 3), which is much lower than the in vivo plasma concentration of Tf (∼ 25-35 μM). Various thermodynamic parameters have been evaluated by using the van't Hoff equation. Importantly, the secondary structure of Tf remains unaltered upon association with CDs. However, at pH 3.5, no such luminescence quenching of CDs has been observed in the presence of Tf due to the lack of ground-state interactions between positively charged (+17.63 ± 0.84 mV) CDs and Tf. Furthermore, the results from UV-Vis and far-UV CD measurements revealed a significant conformational change of Tf at pH 3.5 relative to pH 7.4, which triggers the subsequent release of bound iron from Tf. PL microscopy of individual CD revealed significant luminescence quenching at the single particle level, which further supports the non-emissive ground-state complexation at pH 7.4. Our present results show that these chemically synthesized water-dispersed CDs have the ability to selectively sense the bound iron from released iron of Tf without any conformational perturbation and hence they can be used as potential biological iron sensors as well as luminescent markers for the detection of iron deficiency/overload in biological macromolecules.

Grafted carbazole-assisted electrodeposition of graphene oxide

The electrodeposition of graphene oxide (GO) by covalently linked electroactive monomer, carbazole (Cbz) is first demonstrated herein. This is based on the electropolymerization and electrodeposition of covalently linked Cbz units when a potential is applied. During the electrochemical process, the Cbz groups electropolymerize and carry the GO nanosheets as it electrodeposits on the substrate. Moreover, the GO-Cbz sheets selectively deposit onto the conducting regions of the substrate, which demonstrates its promise for the fabrication of electropatterned graphene-based devices. In addition, GO-Cbz is a promising material for the fabrication of nanocomposite coatings for anticorrosion application. In as little as 1 wt % GO-Cbz loading, a protection efficiency as high as 95.4% was achieved.

Graphene oxide immobilized enzymes show high thermal and solvent stability

The thermal and solvent tolerance of enzymes is highly important for their industrial use. We show here that the enzyme lipase from Rhizopus oryzae exhibits exceptionally high thermal stability and high solvent tolerance and even increased activity in acetone when immobilized onto a graphene oxide (GO) nanosupport prepared by Staudenmaier and Brodie methods. We studied various forms of immobilization of the enzyme: by physical adsorption, covalent attachment, and additional crosslinking. The activity recovery was shown to be dependent on the support type, enzyme loading and immobilization procedure. Covalently immobilized lipase showed significantly better resistance to heat inactivation (the activity recovery was 65% at 70 °C) in comparison with the soluble counterpart (the activity recovery was 65% at 40 °C). Physically adsorbed lipase achieved over 100% of the initial activity in a series of organic solvents. These findings, showing enhanced thermal stability and solvent tolerance of graphene oxide immobilized enzyme, will have a profound impact on practical industrial scale uses of enzymes for the conversion of lipids into fuels.

Surface Functionalization of Chemically Reduced Graphene Oxide for Targeted Photodynamic Therapy

In this study, using chemically reduced graphene oxide (GO) as a model nanocarbon, we successfully developed a facile surface-functionalization strategy of nanocarbons to allow both biocompatibility and receptor targeted drug delivery. Polyvinylpyrrolidone (PVP) coating improves aqueous dispersibility and biocompatibility of GO, and provides anchoring sites for ACDCRGDCFCG peptide (RGD4C). Aromatic photosensitizer chlorin e6 (Ce6) can be effectively loaded into the rGO-PVP-RGD system via hydrophobic interactions and π-π stacking. The nanodelivery system can significantly increase the accumulation of Ce6 in tumor cells and lead to an improved photodynamic therapy (PDT) efficacy as compared to Ce6 alone. The facile surface functionalization strategy can be applied to other nanomaterials such as carbon nanotubes, and inorganic nanomaterials.

Functionalization of nano-graphenes by chimeric peptide engineering

7F4D motif can be applied for non-covalent tethering of various functional peptides onto rGO nanosheets for protein delivery or biosensors.

Valorization of cellulose and waste paper to graphene oxide quantum dots

Valorization of cellulose and waste paper to value-added 2D graphene oxide quantum dots through 3D carbon nanosphere intermediates from microwave assisted hydrothermal degradation.