Photoinduced crystal melting with luminescence evolution based on conformational isomerisation

The phenomenon of crystal melting by light irradiation, known as photo-induced crystal-to-liquid transition (PCLT), can dramatically change material properties with high spatiotemporal resolution. However, the diversity of compounds exhibiting PCLT is severely limited, which hampers further functionalisation of PCLT-active materials and the fundamental understandings of PCLT. Here, we report on heteroaromatic 1,2-diketones as the new class of PCLT-active compounds, whose PCLT is based on conformational isomerisation. In particular, one of the diketones demonstrates luminescence evolution prior to crystal melting. Thus, the diketone crystal exhibits dynamic multistep changes in the luminescence colour and intensity during continuous ultraviolet irradiation. This luminescence evolution can be ascribed to the sequential PCLT processes of crystal loosening and conformational isomerisation before macroscopic melting. Single-crystal X-ray structural analysis, thermal analysis, and theoretical calculations of two PCLT-active and one inactive diketones revealed weaker intermolecular interactions for the PCLT-active crystals. In particular, we observed a characteristic packing motif for the PCLT-active crystals, consisting of an ordered layer of diketone core and a disordered layer of triisopropylsilyl moieties. Our results demonstrate the integration of photofunction with PCLT, provide fundamental insights into the melting process of molecular crystals, and will diversify the molecular design of PCLT-active materials beyond classical photochromic scaffolds such as azobenzenes.

Gentle Patterning Approaches toward Compatibility with Bio-Organic Materials and Their Environmental Aspects

Advances in material science, bioelectronic, and implantable medicine combined with recent requests for eco-friendly materials and technologies inevitably formulate new challenges for nano- and micropatterning techniques. Overall, the importance of creating micro- and nanostructures is motivated by a large manifold of fundamental and applied properties accessible only at the nanoscale. Lithography is a crucial family of fabrication methods to create prototypes and produce devices on an industrial scale. The pure trend in the miniaturization of critical electronic semiconducting components has been recently enhanced by implementing bio-organic systems in electronics. So far, significant efforts have been made to find novel lithographic approaches and develop old ones to reach compatibility with delicate bio-organic systems and minimize the impact on the environment. Herein, such delicate materials and sophisticated patterning techniques are briefly reviewed.

Photoresponsive nanostructures of azobenzene-containing block copolymers at solid surfaces

An azobenzene-containing block copolymer self-assembled into island-like nanostructures. The island-like nanostructures fused into chain-like nanostructures under UV irradiation based on photoinduced solid-to-liquid transitions at the nanoscale.

Photohardenable Pressure-Sensitive Adhesives using Poly(methyl methacrylate) containing Liquid Crystal Plasticizers

Hardenable pressure-sensitive adhesives, which show pressure-sensitive adhesion state with weak adhesion strength in their initial semisolid state and general adhesion state with strong adhesion strength in their hardened state, are desirable in various industrial fields to improve efficiency of manufacturing and recycling products. Here we developed novel photohardenable pressure-sensitive adhesives triggered by photoplasticization of poly(methyl methacrylate) containing photoresponsive liquid crystal (nematic and smectic E) plasticizers at various ratios. It was found that photoplasticization, which is the photoinduced reduction of glass transition temperature and hardness of polymers, could be repeatedly induced by alternate irradiation with ultraviolet (UV) and visible (Vis) light in all mixtures, regardless of the phase structures of the photoresponsive plasticizers. Upon photoplasticization under UV-light irradiation, all mixtures exhibited glassy-to-rubbery transition to a pressure-sensitive adhesion state under appropriate conditions. Upon irradiation of the photoplasticized samples with Vis light, the samples recovered their initial hardened state, recovering the glassy nature with elastic moduli. The adhesion strength of the samples in the hardened state was significantly influenced by the phase structures of the plasticizers. When a photoresponsive plasticizer exhibited the smectic E phase, which is a highly ordered liquid-crystalline phase, the adhesion strength was remarkably larger than those of the case using the plasticizers showing nematic and crystalline phases. This result was reasonably explained in terms of the suppressed bleed-out of the photoresponsive plasticizers from the polymer and the good mechanical properties of the mixture stemming from the characteristics of the smectic E phase. Furthermore, through the reversibility of a photoplasticization process, we achieved a photoinduced reduction of the adhesion strength by UV irradiation of the samples in the hardened state. Photohardenable pressure-sensitive adhesives with reversibility has been developed using a commodity plastic just by adding the photoresponsive plasticizer showing the smectic E phase.

Photoinduced Reversible Solid-to-Liquid Transitions for Photoswitchable Materials

Heating and cooling can induce reversible solid-to-liquid transitions of matter. In contrast, athermal photochemical processes can induce reversible solid-to-liquid transitions of some newly developed azobenzene compounds. Azobenzene is photoswitchable. UV light induces trans-to-cis isomerization; visible light or heat induces cis-to-trans isomerization. Trans and cis isomers usually have different melting points (T_m ) or glass transition temperatures (T_g ). If T_m or T_g of an azobenzene compound in trans and cis forms are above and below room temperature, respectively, light may induce reversible solid-to-liquid transitions. In this Review, we introduce azobenzene compounds that exhibit photoinduced reversible solid-to-liquid transitions, discuss the mechanisms and design principles, and show their potential applications in healable coatings, adhesives, transfer printing, lithography, actuators, fuels, and gas separation. Finally, we discuss remaining challenges in this field.

Photocontrolled self-assembly of azobenzene nanocontainers in water: light-triggered uptake and release of lipophilic molecules

A simple azobenzene based photo-surfactant thanks to unique photo-triggerable spontaneous emulsification characteristics, allows a clean, reversible and fatigue resistant uptake and release of small molecules in aqueous solution.

Photo-responsive dimension-controlled ion-pairing assemblies based on anion complexes of π-electronic systems

Negatively charged π-electronic systems, prepared by the complexation of dipyrrolyldiketone BF₂ complexes with an azobenzene bearing an alkanoate and an aliphatic chain, provided dimension-controlled assemblies, showing the photo-responsive behaviour.

Photo-Responsive Soft Ionic Crystals: Ion-Pairing Assemblies of Azobenzene Carboxylates

This report delineates the design and synthesis of negatively charged azobenzene derivatives that form photo-responsive ion-pairing assemblies. The azobenzene carboxylates possessing aliphatic chains were prepared as photo-responsive anions that promote the formation of ion-pairing dimension-controlled assemblies, including mesophases, when used in conjunction with a tetrabutylammonium (TBA) cation. The photo-responsive properties of the ion pairs and the precursory carboxylic acids in the bulk state were examined by polarized optical microscopy (POM) and X-ray diffraction (XRD), demonstrating that liquid crystal (LC)-liquid and crystal-liquid phase transitions occurred, depending on the number and lengths of the aliphatic chains of each assembly. An ion pair exhibited photo-induced crystal-crystal phase transitions upon switching between two irradiation wavelengths (365/436 nm).

Light-induced dynamic shaping and self-division of multipodal polyelectrolyte-surfactant microarchitectures via azobenzene photomechanics

Light-induced shape transformations represent a fundamental step towards the emergence of adaptive materials exhibiting photomechanical behaviours. Although a range of covalent azobenzene-based photoactive materials has been demonstrated, the use of dynamic photoisomerization in mesostructured soft solids involving non-covalent co-assembly has received little attention. Here we prepare discrete micrometre-sized hydrated particles of a hexagonally ordered polyelectrolyte-surfactant mesophase based on the electrostatically induced co-assembly of poly(sodium acrylate) (PAA) and trans-azobenzene trimethylammonium bromide (trans-azoTAB), and demonstrate unusual non-equilibrium substrate-mediated shape transformations to complex multipodal microarchitectures under continuous blue light. The microparticles spontaneously sequester molecular dyes, functional enzymes and oligonucleotides, and undergo self-division when transformed to the cis state under UV irradiation. Our results illustrate that weak bonding interactions in polyelectrolyte-azobenzene surfactant mesophases can be exploited for photo-induced long-range molecular motion, and highlight how dynamic shape transformations and autonomous division can be activated by spatially confining azobenzene photomechanics in condensed microparticulate materials.

Frontiers of solvent-free functional molecular liquids

The breakthrough of functional molecular liquids (FMLs) in cutting-edge research and their fundamental liquid features on the basis of molecular architectures are highlighted in this Feature Article.

Photon Upconversion and Molecular Solar Energy Storage by Maximizing the Potential of Molecular Self-Assembly

The self-assembly of functional molecules into ordered molecular assemblies and the fulfillment of potentials unique to their nanotomesoscopic structures have been one of the central challenges in chemistry. This Feature Article provides an overview of recent progress in the field of molecular self-assembly with the focus on the triplet-triplet annihilation-based photon upconversion (TTA-UC) and supramolecular storage of photon energy. On the basis of the integration of molecular self-assembly and photon energy harvesting, triplet energy migration-based TTA-UC has been achieved in varied molecular systems. Interestingly, some molecular self-assemblies dispersed in solution or organogels revealed oxygen barrier properties, which allowed TTA-UC even under aerated conditions. The elements of molecular self-assembly were also introduced to the field of molecular solar thermal fuel, where reversible photoliquefaction of ionic crystals to ionic liquids was found to double the molecular storage capacity with the simultaneous pursuit of switching ionic conductivity. A future prospect in terms of innovating molecular self-assembly toward molecular systems chemistry is also discussed.

Photoswitching of glass transition temperatures of azobenzene-containing polymers induces reversible solid-to-liquid transitions

The development of polymers with switchable glass transition temperatures (T_g) can address scientific challenges such as the healing of cracks in high-T_g polymers and the processing of hard polymers at room temperature without using plasticizing solvents. Here, we demonstrate that light can switch the T_g of azobenzene-containing polymers (azopolymers) and induce reversible solid-to-liquid transitions of the polymers. The azobenzene groups in the polymers exhibit reversible cis-trans photoisomerization abilities. Trans azopolymers are solids with T_g above room temperature, whereas cis azopolymers are liquids with T_g below room temperature. Because of the photoinduced solid-to-liquid transitions of these polymers, light can reduce the surface roughness of azopolymer films by almost 600%, repeatedly heal cracks in azopolymers, and control the adhesion of azopolymers for transfer printing. The photoswitching of T_g provides a new strategy for designing healable polymers with high T_g and allows for control over the mechanical properties of polymers with high spatiotemporal resolution.

Reversible transformation between ionic liquids and coordination polymers by application of light and heat

Reversible transformation between ionic liquids and coordination polymers by application of light and heat has been achieved.

A ferrocene–azobenzene derivative showing unprecedented phase transition and better solubility upon UV irradiation

A ferrocene–azobenzene derivative showing unprecedented crystal–liquid phase transition at an elevated temperature and better solubility in organic solvents after UV irradiation has been successfully reported.

Light-induced crawling of crystals on a glass surface

Motion is an essential process for many living organisms and for artificial robots and machines. To date, creating self-propelled motion in nano-to-macroscopic-sized objects has been a challenging issue for scientists. Herein, we report the directional and continuous motion of crystals on a glass surface when irradiated simultaneously with two different wavelengths, using simple azobenzenes as a photoresponsive organic compound. The direction of the motion can be controlled by the position of the light sources, and the crystals can even climb vertical surfaces. The motion is driven by crystallization and melting at the front and rear edges of the crystal, respectively, via photochemical conversion between the crystal and liquid phases induced by the trans–cis isomerization of azobenzenes. This finding could lead to remote-controlled micrometre-sized vehicles and valves on solid substrates.

Creating the motion of nanosized or microsized objects is essential for building robots at small scales. Here, Uchida et al. move photoresponsive organic crystals on a glass substrate using two lamps, which crystallize and melt the crystal front and the rear, respectively, to generate the moving force.

Crystal structure analysis of molecular dynamics using synchrotron X-rays

X-ray crystallography using synchrotron X-rays enables observation of molecular dynamics in a crystal.

Crystal melting by light: X-ray crystal structure analysis of an azo crystal showing photoinduced crystal-melt transition

Trans-cis photoisomerization in an azo compound containing azobenzene chromophores and long alkyl chains leads to a photoinduced crystal-melt transition (PCMT). X-ray structure analysis of this crystal clarifies the characteristic coexistence of the structurally ordered chromophores through their π···π interactions and disordered alkyl chains around room temperature. These structural features reveal that the PCMT starts near the surface of the crystal and propagates into the depth, sacrificing the π···π interactions. A temporal change of the powder X-ray diffraction pattern under light irradiation and a two-component phase diagram allow qualitative analysis of the PCMT and the following reconstructive crystallization of the cis isomer as a function of product accumulation. This is the first structural characterization of a compound showing the PCMT, overcoming the low periodicity that makes X-ray crystal structure analysis difficult.

Photochemically reversible liquefaction and solidification of multiazobenzene sugar-alcohol derivatives and application to reworkable adhesives

Multiazobenzene compounds, hexakis-O-[4-(phenylazo)phenoxyalkylcarboxyl]-D-mannitols and hexakis-O-[4-(4-hexylphenylazo)phenoxyalkylcarboxyl]-D-mannitols, exhibit photochemically reversible liquefaction and solidification at room temperature. Their photochemical and thermal phase transitions were investigated in detail through thermal analysis, absorption spectroscopy, and dynamic viscoelasticity measurements, and were compared with those of other sugar-alcohol derivatives. Tensile shear strength tests were performed to determine the adhesions of the compounds sandwiched between two glass slides to determine whether the compounds were suitable for application as adhesives. The adhesions were varied by alternately irradiating the compounds with ultraviolet and visible light to photoinduce phase transitions. The azobenzene hexyl tails, lengths of the methylene spacers, and differences in the sugar-alcohol structures affected the photoresponsive properties of the compounds.