Designing intelligent bioorthogonal nanozymes: Recent advances of stimuli-responsive catalytic systems for biomedical applications

Bioorthogonal nanozymes have emerged as a potent tool in biomedicine due to their unique ability to perform enzymatic reactions that do not interfere with native biochemical processes. The integration of stimuli-responsive mechanisms into these nanozymes has further expanded their potential, allowing for controlled activation and targeted delivery. As such, intelligent bioorthogonal nanozymes have received more and more attention in developing therapeutic approaches. This review provides a comprehensive overview of the recent advances in the development and application of stimuli-responsive bioorthogonal nanozymes. By summarizing the design outlines for anchoring bioorthogonal nanozymes with stimuli-responsive capability, this review seeks to offer valuable insights and guidance for the rational design of these remarkable materials. This review highlights the significant progress made in this exciting field with different types of stimuli and the various applications. Additionally, it also examines the current challenges and limitations in the design, synthesis, and application of these systems, and proposes potential solutions and research directions. This review aims to stimulate further research toward the development of more efficient and versatile stimuli-responsive bioorthogonal nanozymes for biomedical applications.

UCST-Type Thermoresponsive Sol-Gel Transition Triblock Copolymer Containing Zwitterionic Polymer Blocks

Thermoresponsive sol-gel transition polymers are of significant interest because of their fascinating biomedical applications, including as drug reservoirs for drug delivery systems and scaffolds for tissue engineering. Although extensive research has been conducted on lower critical solution temperature (LCST)-type sol-gel transition polymers, there have been few reports on upper critical solution temperature (UCST)-type sol-gel transition polymers. In this study, we designed an ABA-type triblock copolymer composed of a poly(ethylene glycol) (PEG) block and zwitterionic polymer blocks that exhibit UCST-type thermoresponsive phase transitions. A sulfobetaine (SB) monomer with both ammonium and sulfonate (-SO3) groups in its side chain or a sulfabetaine (SaB) monomer with both ammonium and sulfate (-OSO3) groups in its side chain was polymerized from both ends of the PEG block via reversible addition-fragmentation chain-transfer (RAFT) polymerization to obtain PSB-PEG-PSB and PSaB-PEG-PSaB triblock copolymers, respectively. Although an aqueous solution containing the PSB-PEG-PSB triblock copolymer showed an increase in viscosity upon cooling, it did not undergo a sol-to-gel transition. In contrast, a sol-to-gel transition was observed when a phosphate-buffered saline containing PSaB-PEG-PSaB was cooled from 80 °C to 25 °C. The PSaB blocks with -OSO3 groups exhibited a stronger dipole-dipole interaction than conventional SB with -SO3 groups, leading to intermolecular association and the formation of a gel network composed of PSaB assemblies bridged with PEG. The fascinating UCST-type thermoresponsive sol-gel transition properties of the PSaB-PEG-PSaB triblock copolymer suggest that it can provide a useful platform for designing smart biomaterials, such as drug delivery reservoirs and cell culture scaffolds.

Injectable extracellular matrix-mimetic hydrogel based on electrospun Janus fibers

To date, the reported injectable hydrogels have failed to mimic the fibrous architecture of the extracellular matrix (ECM), limiting their biological effects on cell growth and phenotype. Additionally, they lack the micro-sized pores present within the ECM, which is unfavorable for the facile transport of nutrients and waste. Herein, an injectable ECM-mimetic hydrogel (IEMH) was fabricated by shortening and dispersing Janus fibers capable of self-curling at body temperature into pH 7.4 phosphate buffer solution. The IEMH could be massively prepared through a side-by-side electrospinning process combined with ultraviolet irradiation. The IEMHs with only 5 wt% fibers could undergo sol-gel transition at body temperature to become solid gels with desirable stability, sturdiness, and elasticity and self-healing ability. In addition, they possessed notable pseudoplasticity, which is beneficial to injection at room temperature. The results obtained from characterization analysis via scanning electron microscopy, total internal reflection fluorescence microscopy, nuclear magnetic resonance spectroscopy, and Fourier-transform infrared spectroscopy indicate that their sol-gel transition under physiological conditions stems from the synergistic action of the tight entanglements between thermally-induced self-curling fibers and the hydrophobic interaction between the fibers. An MTT assay using C2C12 myoblast cells was performed to examine the in vitro cytotoxicity of IEMHs for biomedical applications, and the cell viability was found to be more than 95%.

Heat-Set Supramolecular Hydrogelation by Regulating the Hydrophilic-Lipophilic Balance for a Tunable Circularly Polarized Luminescent Switch

Heat-set supramolecular gels exhibited totally opposite phase behaviors of dissolution upon cooling and gelation on heating. They are commonly discovered by chance and their rational design remains a great challenge. Herein, a rational design strategy is proposed to realize heat-set supramolecular hydrogelation through regulation of the hydrophilic-lipophilic balance of the system. A newly synthesized amphiphile hydrogelator with pyrene embedded in its lipophilic terminal can self-assemble into a hydrogel through a heating and cooling cycle. However, the host-guest complex of the gelator and hydrophilic γ-cyclodextrin (γ-CyD) results in a sol at room temperature. Thus, heat-set hydrogelation is realized from the sol state in a controllable manner. Heat-set gelation mechanism is revealed by exploring critical heat-set supramolecular gelation and the related findings provide a general strategy for developing new functional molecular gels with tunable hydrophilic-lipophilic balance.

Bioinspired Interfacial Friction Control: From Chemistry to Structures to Mechanics

Organisms in nature have evolved a variety of surfaces with different tribological properties to adapt to the environment. By studying, understanding, and summarizing the friction and lubrication regulation phenomena of typical surfaces in nature, researchers have proposed various biomimetic friction regulation theories and methods to guide the development of new lubrication materials and lubrication systems. The design strategies for biomimetic friction/lubrication materials and systems mainly include the chemistry, surface structure, and mechanics. With the deepening understanding of the mechanism of biomimetic lubrication and the increasing application requirements, the design strategy of multi-strategy coupling has gradually become the center of attention for researchers. This paper focuses on the interfacial chemistry, surface structure, and surface mechanics of a single regulatory strategy and multi-strategy coupling approach. Based on the common biological friction regulation mechanism in nature, this paper reviews the research progress on biomimetic friction/lubrication materials in recent years, discusses and analyzes the single and coupled design strategies as well as their advantages and disadvantages, and describes the design concepts, working mechanisms, application prospects, and current problems of such materials. Finally, the development direction of biomimetic friction lubrication materials is prospected.

Intravesical chemotherapy synergize with an immune adjuvant by a thermo-sensitive hydrogel system for bladder cancer

Surgical resection remains the prefer option for bladder cancer treatment. However, the effectiveness of surgery is usually limited for the high recurrence rate and poor prognosis. Consequently, intravesical chemotherapy synergize with immunotherapy in situ is an attractive way to improve therapeutic effect. Herein, a combined strategy based on thermo-sensitive PLEL hydrogel drug delivery system was developed. GEM loaded PLEL hydrogel was intravesical instilled to kill tumor cells directly, then PLEL hydrogel incorporated with CpG was injected into both groins subcutaneously to promote immune responses synergize with GEM. The results demonstrated that drug loaded PLEL hydrogel had a sol-gel phase transition behavior in response to physiological temperature and presented sustained drug release, and the PLEL-assisted combination therapy could have better tumor suppression effect and stronger immunostimulating effect in vivo. Hence, this combined treatment with PLEL hydrogel system has great potential and suggests a clinically-relevant and valuable option for bladder cancer.

Enhanced Chemo-Immunotherapy Strategy Utilizing Injectable Thermosensitive Hydrogel for The Treatment of Diffuse Peritoneal Metastasis in Advanced Colorectal Cancer

Patients with colorectal cancer (CRC) and diffuse peritoneal metastasis (PM) are not eligible for surgical intervention. Thus, palliative treatment remains the standard of care in clinical practice. Systemic chemotherapy fails to cause drug accumulation at the lesion sites, while intraperitoneal chemotherapy (IPC) is limited by high clearance rates and associated complications. Given the poor prognosis, a customized OxP/R848@PLEL hydrogel delivery system has been devised to improve the clinical benefit of advanced CRC with diffuse PM. This system is distinguished by its simplicity, security, and efficiency. Specifically, the PLEL hydrogel exhibits excellent injectability and thermosensitivity, enabling the formation of drug depots within the abdominal cavity, rendering it an optimal carrier for IPC. Oxaliplatin (OxP), a first-line drug for advanced CRC, is cytotoxic and enhances the immunogenicity of tumors by inducing immunogenic cell death. Furthermore, OxP and resiquimod (R848) synergistically enhance the maturation of dendritic cells, promote the expansion of cytotoxic T lymphocytes, and induce the formation of central memory T cells. Moreover, R848 domesticates macrophages to an anti-tumor phenotype. OxP/R848@PLEL effectively eradicates peritoneal metastases, completely inhibits ascites production, and significantly prolongs mice lifespan. As such, it provides a promising approach to managing diffuse PM in patients with CRC without surgical indications.

Preparation of Tamsulosin Hydrochloride-Loaded Mucoadhesive In Situ Gelling Polymeric Formulation for Nasal Delivery in Geriatrics

This study aimed to prepare tamsulosin hydrochloride (HCl)-loaded in situ gelling formulation by using hydroxypropyl methylcellulose (HPMC), gellan gum, poloxamer 188, and benzalkonium chloride. Physicochemical evaluation of formulations included determination of pH, viscosity, gelation time, gel strength, drug content, and sterility. In silico study was performed to analyze interactions between polymers, drug, and mucin glycoprotein. In vitro degradation time, drug release, ex vivo mucoadhesion time, permeation, in vivo pharmacokinetics, and stability studies were performed to assess the formulation. Formulations were transparent and displayed acceptable physicochemical attributes. Tamsulosin HCl and polymers interacted via non-covalent interactions. HPMC formed hydrogen bonds, hydrophobic and van der Waals interactions with mucin protein while the drug formed hydrogen bonds only. Gel formulation degraded in simulated nasal fluid within 24 h. In situ gelling formulation showed 83.8 ± 1.7% drug release and remained adhered to the mucosa for 24.5 ± 1 h. A higher (~ 1.85 times) drug permeation was recorded through mucosa within 6 h by in situ gelling formulation when compared to control counterparts (aqueous solution of drug and in situ gelling formulation without poloxamer 188). Nasal administration of tamsulosin HCl by using in situ gelling formulation led to a ~ 3.3 and ~ 3.5 times, respectively, higher Cmax (maximum plasma concentration) and AUCtotal (total area under the curve) than the orally administered aqueous solution. Relative bioavailability of drug delivered by nasal in situ gelling formulation was 3.5 times the oral counterpart. These results indicated that the prepared in situ gelling formulation can act as a promising candidate for systemic administration of tamsulosin HCl.

Achieving Long-Acting Local Analgesia Using an Intelligent Hydrogel Encapsulated with Drug and pH Regulator

Local anesthetics are important for the treatment of postoperative pain. Since a single injection of the solution of a drug such as bupivacaine (BUP) works only for a few hours, it is much required to develop a long-term injectable formulation that maintains its efficacy for more than 1 day. Herein, an intelligent copolymer hydrogel loaded with BUP microcrystals was invented. The biodegradable block copolymer was synthesized by us and composed of a central hydrophilic poly(ethylene glycol) (PEG) block and two hydrophobic poly(lactide-co-glycolide) (PLGA) blocks. The aqueous system of the amphiphilic copolymer underwent a sol-gel transition between room temperature and body temperature and, thus, physically gelled after injection. Considering the decrease of solubility of BUP with the increase of pH and the internal acidic environment due to the hydrolysis of PLGA, calcium carbonate (CaCO3) powder was introduced as a pH regulator. Then, the internal pH was found to be nearly neutral and many BUP microcrystals were dispersed in the gel network. In this way, BUP had achieved a sustained release out of the thermogel. The maximum possible effect (MPE) in a rat sciatic nerve blockade model was used to describe the sensory blockade effect. In vivo analgesic effects evaluated with a hot plate experiment of rats demonstrated that the thermogel encapsulated with BUP microcrystal and CaCO3 powder significantly prolonged analgesia up to 44 h, the duration time with respect to 50% MPE. The intramuscularly injected implant exhibited biocompatibility in histological analyses. Besides, the untreated leg of the rats was not influenced by the treated leg, indicating no obvious systematic anesthesia of this hydrogel formulation. Such an intelligent and composite formulation represents a potential strategy for long-acting analgesia therapy.

Injectable hydrogels for cartilage and bone tissue regeneration: A review

Annually, millions of patients suffer from irreversible injury owing to the loss or failure of an organ or tissue caused by accident, aging, or disease. The combination of injectable hydrogels and the science of stem cells have emerged to address this persistent issue in society by generating minimally invasive treatments to augment tissue function. Hydrogels are composed of a cross-linked network of polymers that exhibit a high-water retention capacity, thereby mimicking the wet environment of native cells. Due to their inherent mechanical softness, hydrogels can be used as needle-injectable stem cell carrier materials to mend tissue defects. Hydrogels are made of different natural or synthetic polymers, displaying a broad portfolio of eligible properties, which include biocompatibility, low cytotoxicity, shear-thinning properties as well as tunable biological and physicochemical properties. Presently, novel ongoing developments and native-like hydrogels are increasingly being used broadly to improve the quality of life of those with disabling tissue-related diseases. The present review outlines various future and in-vitro applications of injectable hydrogel-based biomaterials, focusing on the newest ongoing developments of in-situ forming injectable hydrogels for bone and cartilage tissue engineering purposes.

Next-Generation Hydrogels as Biomaterials for Biomedical Applications: Exploring the Role of Curcumin

Since the first report on the pharmacological activity of curcumin in 1949, enormous amounts of research have reported diverse activities for this natural polyphenol found in the dietary spice turmeric. However, curcumin has not yet been used for human application as an approved drug. The clinical translation of curcumin has been hampered due to its low solubility and bioavailability. The improvement in bioavailability and solubility of curcumin can be achieved by its formulation using drug delivery systems. Hydrogels with their biocompatibility and low toxicity effects have shown a substantial impact on the successful formulation of hydrophobic drugs for human clinical trials. This review focuses on hydrogel-based delivery systems for curcumin and describes its applications as anti-cancer as well as wound healing agents.

Experimental Study on a Liquid-Solid Phase-Change Autogenous Proppant Fracturing Fluid System

In this paper, a liquid-solid phase-change autogenous proppant fracturing fluid system (LSPCAP) was proposed to solve the problems that was caused by "sand-carrying" in conventional fracturing technology in oil and gas fields. The characteristic of the new fluid system is that no solid particles will be injected in the whole process of fracturing construction except liquids. The fluid itself will transform into solid particles under the formation temperature to resist the closure stress in the fractures. There are two kinds of liquids that make up the new fracturing fluid system. One of the liquids is called phase-change liquid (PCL) which occurs in the liquid-solid phase change under the formation temperature to form solid particles. Another is called nonphase-change liquid (NPCL) which controls the dispersity and size of PCL in the two-phase fluid system. Based on the molecular interaction theory and organic chemistry, bisphenol-A epoxy resin was selected as the building unit of the PCL, and the NPCL consisted of deionized water + nonionic surfactant. The test results indicated that the new fracturing fluid shows the properties of non-Newtonian fluid and has no wall-building property. The new fluid system has good compatibility with the formation fluid, conventional fracturing fluid, and hydrochloric acid. Through the filtration test, the filtration coefficients of PCL, NPCL, and mixture are found to be 1.56 × 10^-4 m/s^1/2, 2.66 × 10^-4 m/s^1/2, and 1.7 × 10^-4 m/s^1/2, respectively, and the damage rate of mixture and NPCL is 18 and 17.7%. The friction test results show that the resistance reduction rate reaches 69% when the volume ratio of PCL and NPCL is 1:10. The shear rate and time only affect the size of the autogenous solid particles, and the sorting coefficient (S) of the particles is 1.04-1.73, indicating good sorting. Crushing resistance and conductivity test results show that the crush rate of autogenous solid particles is 3.56-8.42%. The conductivity of the autogenous solid particles is better than those of quartz sand and ceramsite under a pressure of 10-30 MPa.

Recent advances in long-acting drug delivery systems for anticancer drug

The use of systemic anticancer chemotherapy is intrinsically limited by its toxicity. Whether dealing with small molecules or biopharmaceuticals, after systemic administration, small doses fail to reach effective intratumoral concentrations, while high doses with significant tumor inhibition effects may also drive the death of healthy cells, endangering the patients. Therefore, strategies based on drug delivery systems (DDSs) for avoiding the systemic toxicity have been designed. Due to their ability to protect drugs from early elimination and control drug release, DDSs can foster tumor exposure to anticancer therapeutics by extending their circulation time or steadily releasing drugs into the tumor sites. However, approval of tailored DDSs systems for clinical use is minimal as the safety and the in vivo activity still need to be ameliorated by manipulating their physicochemical characteristics. During the last few years, several strategies have been described to improve their safety, stability, and fine-tune pharmaceuticals release kinetics. Herein, we reviewed the main DDSs, namely polymeric conjugates, nano or microparticles, hydrogels, and microneedles, explored for long-acting anticancer treatments, highlighting recently proposed modifications and their potential advantages for different anticancer therapies. Additionally, important limitations of long-acting anticancer therapies and future technology directions were also covered.

Vitreous Substitutes from Bench to the Operating Room in a Translational Approach: Review and Future Endeavors in Vitreoretinal Surgery

Vitreous substitutes are indispensable tools in vitreoretinal surgery. The two crucial functions of these substitutes are their ability to displace intravitreal fluid from the retinal surface and to allow the retina to adhere to the retinal pigment epithelium. Today, vitreoretinal surgeons can choose among a plethora of vitreous tamponades, and the tamponade of choice might be difficult to determine in the ever-expanding range of possibilities for a favorable outcome. The currently available vitreous substitutes have disadvantages that need to be addressed to improve the surgical outcome achievable today. Herein, the fundamental physical and chemical proprieties of all vitreous substitutes are reported, and their use and clinical applications are described alongside some surgical techniques of intra-operative manipulation. The major upcoming developments in vitreous substitutes are extensively discussed, keeping a translational perspective throughout. Conclusions on future perspectives are derived through an in-depth analysis of what is lacking today in terms of desired outcomes and biomaterials technology.

Design as strategy for evaluation of the mechanical properties of binary mixtures composed of poly(methyl vinyl ether-alt-maleic anhydride) and Pluronic F127 for biomedical applications

The synergism between thermoresponsive and bioadhesive polymers can lead to the optimization of materials with enhanced mechanical and bioadhesive properties. Quality by Design can assure the understanding and control of formulation variables. In this approach, Design of Experiment has been widely utilized as an important strategy. Poly(methyl vinyl ether-alt-maleic anhydride) (PVMMA) is a bioadhesive polymer and Pluronic F127 (PF127) shows thermoresponsiveness. The association of these two polymers has been poorly investigated. The aim of this work was to study the mechanical, bioadhesive and rheological properties of polymer mixtures composed of PVMMA and PF127, in order to select the best conditions and formulations for biomedical applications. Textural properties (hardness, compressibility, adhesiveness, cohesiveness and elasticity), softness index, bioadhesion and rheological characteristics (flow and viscoelasticity) showed that 17.5-20% (w/w) PF127-polymer mixtures displayed improved values of the parameters. However, the rheological interaction parameter showed low synergism, due to the polymers' characteristics and system organization. The formulations displayed gelation temperatures suitable for administration, with improved bioadhesive properties mainly at 34 °C and suggests the formulations can be used for biomedical applications. DoE constituted an important tool to investigate these systems showing the main effects that significantly influence the binary mixtures.

Starch-g-Acrylic Acid/Magnetic Nanochitin Self-Healing Ferrogels as Flexible Soft Strain Sensors

Mechanically robust ferrogels with high self-healing ability might change the design of soft materials used in strain sensing. Herein, a robust, stretchable, magneto-responsive, notch insensitive, ionic conductive nanochitin ferrogel was fabricated with both autonomous self-healing and needed resilience for strain sensing application without the need for additional irreversible static chemical crosslinks. For this purpose, ferric (III) chloride hexahydrate and ferrous (II) chloride as the iron source were initially co-precipitated to create magnetic nanochitin and the co-precipitation was confirmed by FTIR and microscopic images. After that, the ferrogels were fabricated by graft copolymerisation of acrylic acid-g-starch with a monomer/starch weight ratio of 1.5. Ammonium persulfate and magnetic nanochitin were employed as the initiator and crosslinking/nano-reinforcing agents, respectively. The ensuing magnetic nanochitin ferrogel provided not only the ability to measure strain in real-time under external magnetic actuation but also the ability to heal itself without any external stimulus. The ferrogel may also be used as a stylus for a touch-screen device. Based on our findings, our research has promising implications for the rational design of multifunctional hydrogels, which might be used in applications such as flexible and soft strain sensors, health monitoring, and soft robotics.

Loss of multipotency in adipose-derived stem cells after culture in temperature-responsive injectable polymer hydrogels

Adipose-derived stem cells (AdSCs), a type of mesenchymal stem cell, are expected to be applicable to regenerative medicine and cellular delivery systems. The maintenance of cell multipotency and control of the differentiation direction are important for these applications. However, the differentiation direction of these cells is widely believed to depend on the physical properties of their scaffold. In this study, we explored whether the multipotency of AdSCs, that is, their ability to differentiate into multiple cells, is maintained when they are removed from injectable polymer (IP) hydrogels with various degrees of cross-linking and induced to differentiate into osteoblasts and adipocytes. We confirmed that AdSCs cultured in IP hydrogels maintained an undifferentiated state. However, their differentiation into osteoblasts and adipocytes cannot be ensured; specifically, the multipotency of AdSCs may decrease when they are cultured in IP hydrogels. When cultured in an IP hydrogel with extreme softness and poor cell adhesion properties, the AdSCs remained in an undifferentiated state, but their multipotency was reduced. These results provide important insights into stem cell delivery systems using IP hydrogels.

Hydrogels as promising platforms for engineered living bacteria-mediated therapeutic systems

The idea of using engineered bacteria as prospective living therapeutic agents for the treatment of different diseases has been raised. Nevertheless, the development of safe and effective treatment strategies remains essential to the success of living bacteria-mediated therapy. Hydrogels have presented great promise for the delivery of living bacterial therapeutics due to their tunable physicochemical properties, good bioactivities, and excellent protection of labile payloads. In this review, we summarize the hydrogel design strategies for living bacteria-mediated therapy and review the recent advances in hydrogel-based living bacterial agent delivery for the treatment of typical diseases, including those for digestive health, skin fungal infections, wound healing, vaccines, and cancer, and discuss the current challenges and future perspectives of these strategies in the field. It is believed that the importance of hydrogel-based living bacteria-mediated therapy is expected to further increase with the development of both synthetic biology and biomaterials science in the future.

Microcarriers in application for cartilage tissue engineering: Recent progress and challenges

Successful regeneration of cartilage tissue at a clinical scale has been a tremendous challenge in the past decades. Microcarriers (MCs), usually used for cell and drug delivery, have been studied broadly across a wide range of medical fields, especially the cartilage tissue engineering (TE). Notably, microcarrier systems provide an attractive method for regulating cell phenotype and microtissue maturations, they also serve as powerful injectable carriers and are combined with new technologies for cartilage regeneration. In this review, we introduced the typical methods to fabricate various types of microcarriers and discussed the appropriate materials for microcarriers. Furthermore, we highlighted recent progress of applications and general design principle for microcarriers. Finally, we summarized the current challenges and promising prospects of microcarrier-based systems for medical applications. Overall, this review provides comprehensive and systematic guidelines for the rational design and applications of microcarriers in cartilage TE.

Entropy-Driven Thermo-gelling Vitrimer

Thermo-gelling polymers have been envisioned as promising smart biomaterials but limited by their weak mechanical and thermodynamic stabilities. Here, we propose a new thermo-gelling vitrimer, which remains at a liquid state because of the addition of protector molecules preventing the crosslinking, and with increasing temperature, an entropy-driven crosslinking occurs to induce the sol-gel transition. Moreover, we find that the activation barrier in the metathesis reaction of vitrimers plays an important role, and experimentally, one can use catalysts to tune the activation barrier to drive the vitrimer to form an equilibrium gel at high temperature, which is not subject to any thermodynamic instability. We formulate a mean-field theory to describe the entropy-driven crosslinking of the vitrimer, which agrees quantitatively with computer simulations and paves the way for the design and fabrication of novel vitrimers for biomedical applications.

Magnetically responsive nanofibrous ceramic scaffolds for on-demand motion and drug delivery

Smart biomaterials, featuring not only bioactivity, but also dynamic responsiveness to external stimuli, are desired for biomedical applications, such as regenerative medicine, and hold great potential to expand the boundaries of the modern clinical practice. Herein, a magnetically responsive three-dimensional scaffold with sandwich structure is developed by using hydroxyapatite (HA) nanowires and ferrosoferric oxide (Fe3O4) nanoparticles as building blocks. The magnetic HA/Fe3O4 scaffold is fully inorganic in nature, but shows polymeric hydrogel-like characteristics including a 3D fibrous network that is highly porous (>99.7% free volume), deformable (50% deformation) and elastic, and tunable stiffness. The magnetic HA/Fe3O4 scaffold has been shown to execute multimodal motion upon exposure to an external magnetic field including shape transformation, rolling and somersault. In addition, we have demonstrated that the magnetic scaffold can serve as a smart carrier for remotely controlled, on-demand delivery of compounds including an organic dye and a protein. Finally, the magnetic scaffold has exhibited good biocompatibility, supporting the attachment and proliferation of human mesenchymal stromal cells, thereby showing great potential as smart biomaterials for a variety of biomedical applications.

High efficiency of in-situ cross-linking and acid triggered drug delivery by introducing tobramycin into injectable and biodegradable hydrogels

High efficiency of in-situ cross-linking and acid triggered drug delivery is realized by introducing tobramycin into the hydrogels. Injectable and biodegradable hydrogels are prepared through two steps: First generation of reactive aldehyde groups in the sodium alginate (A-Alg) and then introduction of antibiotic tobramycin as cross-linker. Due to the formation of dynamic Schiff base bonds between the amino groups in tobramycin and aldehyde groups in A-Alg, the gelation of hydrogels can be realized immediately. Thus, tobramycin acts well as the first role cross-linker and the hydrogels containing tobramycin can be injected into the wound during the treatment. In addition, the acid from the decomposition of organic compounds by the bacteria can break the cross-linking points previously formed by tobramycin in the hydrogels. Therefore, tobramycin can be released and act as the second role model drug to kill the bacteria. Because the hydrogels network is broken, the release of tobramycin is more efficient than the traditional drug delivery from hydrogels by diffusion. Based on these unique properties, the present hydrogels containing tobramycin exhibit a good injectable and biodegradable capability. In addition, due to the existence of the reversible acid-labile linkages in the hydrogels, the hydrogels containing tobramycin are also self-healing, which additionally is favorable for the application of wound dressing. More importantly, the antibacterial hydrogels also demonstrate good biocompatibility in vitro and significantly therapeutic effects on an infected mice model in vivo. Based on the above special properties, the hydrogels cross-linked by tobramycin indicate a new approach to prepare hydrogel dressings with low-cost, non-toxicity and good anti-bacterial performance in the treatment of infectious wounds.

A Polyanionic Tartrate-containing Temperature-responsive Hydrogel

Thermogels, a class of hydrogels which show spontaneous sol-gel phase transition when warmed, are an important class of soft biomaterials. To date, however, most amphiphilic polymers that are able to form thermogels in aqueous solution are uncharged, and the influence of ionisable groups on thermogelation are largely unknown. Herein, we report the first example of a polyanionic amphiphilic multi-block copolymer, containing multiple pendant carboxylate groups, that can form transparent thermogels spontaneously when warmed up to physiological temperature. We demonstrate that introducing negative charges onto thermogelling polymers could significantly alter the properties of the micelles and thermogels formed. Furthermore, the polymer's polyanionic character provides new options for modulating the gel rheological properties, such as stiffness and gelation temperatures, through electrostatic interactions with different cations. We also demonstrated the polyanionic thermogel allowed slower sustained release of a cationic model drug compound compared to an anionic one over 2 weeks. The findings from our study demonstrate exciting new possibilities for advanced biomedical applications using charged polyelectrolyte thermogel materials.

Knee Osteoarthritis Therapy: Recent Advances in Intra-Articular Drug Delivery Systems

Drug delivery for osteoarthritis (OA) treatment is a continuous challenge because of their poor bioavailability and rapid clearance in joints. Intra-articular (IA) drug delivery is a common strategy and its therapeutic effects depend mainly on the efficacy of the drug-delivery system used for OA therapy. Different types of IA drug-delivery systems, such as microspheres, nanoparticles, and hydrogels, have been rapidly developed over the past decade to improve their therapeutic effects. With the continuous advancement in OA mechanism research, new drugs targeting specific cell/signaling pathways in OA are rapidly evolving and effective drug delivery is critical for treating OA. In this review, recent advances in various IA drug-delivery systems for OA treatment, OA targeted strategies, and related signaling pathways in OA treatment are summarized and analyzed based on current publications.

Thermosensitive core-rigid micelles of monomethoxy poly(ethylene glycol)-deoxy cholic acid

Background

Thermosensitive micelles with rigid cores that exhibit a reversible lower critical solution temperature at 30–35 °C can be applied for drug delivery.

Method

Hydrophilic monomethoxy poly(ethylene glycol) was conjugated to hydrophobic deoxycholic acid to prepare monomethoxy poly(ethylene glycol)-deoxycholic acid (mPEG-DC). Micelle formation and thermosensitive solution behavior were studied using various methods, including hydrophobic dye solubilization, transmission electron microscopy, dynamic light scattering, turbidity measurement, microcalorimetry, and ¹H-NMR spectroscopy. Drug release from the thermosensitive micelles was demonstrated using estradiol, a model drug.

Results

The mPEG-DC formed micelles with a critical micelle concentration of 0.05 wt.% and an average size of 15 nm. Aqueous mPEG-DC solutions exhibit a lower critical solution temperature (LCST) that is independent of concentration and reversible over heating and cooling cycles. The LCST transition is an entropically driven process involving dehydration of the PEG shell. The thermosensitive mPEG-DC micelles with rigid DC cores were applied as an estradiol delivery system in which estradiol was released, without initial burst, over the 16 days in a diffusion-controlled manner.

Conclusions

This study suggests that mPEG-DCs form thermosensitive micelles with rigid cores that can function as an excellent diffusion-controlled hydrophobic drug delivery system without initial burst release.

Graphical Abstract

Thermosensitive core-rigid micelles of monomethoxy poly(ethylene glycol)-deoxy cholic acid

Supplementary Information

The online version contains supplementary material available at 10.1186/s40824-022-00263-9.

In situ Co-Delivery of Doxorubicin and Cisplatin by Injectable Thermosensitive Hydrogels for Enhanced Osteosarcoma Treatment

Purpose

Osteosarcoma is considered as the most common primary malignant bone tumor in children and adolescents, and the treatments including chemotherapy and surgery were far from satisfactory. Localized tumor treatments by hydrogels incorporating combined chemotherapeutic drugs have recently emerged as superior approaches for enhanced anti-tumor effects and reduced systemic toxicity.

Methods

A novel injectable thermosensitive poly (lactide-co- glycolide)-poly (ethylene glycol)-poly(lactide-co-glycolide) triblock copolymer hydrogel containing doxorubicin and cisplatin for the localized chemotherapy of osteosarcoma were synthesized and characterized. The in vitro drug release properties of the drugs-loaded hydrogels were investigated. To study the anti-tumor efficacy of hydrogels depots in vitro, the cytotoxicity and apoptosis rate against Saos-2 and MG-63 cells were evaluated by MTT, Annexin V and PCR methods. The in vivo synergistic anti-tumor efficacy of the multi-drugs co-loaded hydrogels was investigated by human osteosarcoma xenografts. Additionally, the systemic toxic side effects were evaluated by ex vivo histological analysis of the major organs of the mice.

Results

The PLGA-PEG-PLGA copolymer solution underwent a sol-gel transition at appropriate temperature and degraded in the PBS, presenting a friendly biocompatibility in vitro. The in vitro cell viability tests demonstrated that DOX and CDDP co-loaded hydrogels exhibited synergistic anti-proliferation effect, due to the sustained release of drugs from the drugs-loaded hydrogel. The treatment with DOX and CDDP co-loaded hydrogel led to the highest efficiency in inhibiting the tumor growth, enhanced tumor necrosis rate and increased regulation of the apoptosis-related gene expressions, indicating a synergistic anti-tumor efficacy in vivo. Additionally, ex vivo histological analysis of the nude mice exhibited low systemic toxicity.

Conclusion

The combination treatment of osteosarcoma by localized, sustained co-delivery of DOX and CDDP by PLGA-PEG-PLGA hydrogel may serve as a promising strategy for efficient clinical treatment of osteosarcoma.

Branched PCL-Based Thermogelling Copolymers: Controlling Polymer Architecture to Tune Drug Release Profiles

Temperature-responsive hydrogels, or thermogels, are a unique class of biomaterials that show facile and spontaneous transition from solution to gel when warmed. Their high biocompatibility, and ease of formulation with both small molecule drugs and biologics have made these materials prime candidates as injectable gel depots for sustained local drug delivery. At present, controlling the kinetics and profile of drug release from thermogels is achieved mainly by varying the ratio of hydrophobic: hydrophilic composition and the polymer molecular weight. Herein, we introduce polymer branching as a hitherto-overlooked polymer design parameter that exhibits profound influences on the rate and profile of drug release. Through a family of amphiphilic thermogelling polymers with systematic variations in degree of branching, we demonstrate that more highly-branched polymers are able to pack less efficiently with each other during thermogel formation, with implications on their physical properties and stability towards gel erosion. This in turn resulted in faster rates of release for both encapsulated small molecule hydrophobic drug and protein. Our results demonstrate the possibility of exploiting polymer branching as a hitherto-overlooked design parameter for tailoring the kinetics and profile of drug release in injectable thermogel depots.

Thermosensitive Chitosan-Containing Hydrogels: Their Formation, Properties, Antibacterial Activity, and Veterinary Usage

Mixtures of aqueous solutions of chitosan hydrochloride (CS·HCl, 1–4 wt.%) and Pluronic F-127 (Pl F-127, 25 wt.%) were studied using vibrational and rotational viscometry; the optimal aminopolysaccharide concentration (3 wt.%) and the CS·HCl:Pl F-127 ratio (30:70) to obtain a thermosensitive hydrogel were found. It was shown that at 4 °C, such mixed compositions were viscous liquids, while at 37 °C for 1–2 min, they undergo a thermally reversible transition to a shape-stable hydrogel with a developed level of structure formation, satisfactory viscosity and high mucoadhesive parameters (maximum pull-off force F_max = 1.5 kN/m²; work of adhesion W = 66.6 × 10⁻³ J). Adding D-ascorbic acid to the hydrogel led to orientational ordering of the supramolecular structure of the mixed system and significantly improved mucoadhesion (F_max = 4.1 kN/m², W = 145.1 × 10⁻³ J). A microbiological study revealed the high antibacterial activity of the hydrogel against Gram-negative and Gram-positive bacterial strains. The treatment of mixed bacterial infection in cows demonstrated the possibility of the in situ formation of a viscoelastic gel and revealed its high therapeutic effect. It has been suggested that our thermosensitive mucoadhesive CS·HCl:Pl F-127 hydrogels could be considered as independent veterinary drugs and pharmaceuticals.

Molecular bases for temperature sensitivity in supramolecular assemblies and their applications as thermoresponsive soft materials

Thermoresponsive supramolecular assemblies have been extensively explored in diverse formats, from injectable hydrogels to nanoscale carriers, for a variety of applications including drug delivery, tissue engineering and thermo-controlled catalysis. Understanding the molecular bases behind thermal sensitivity of materials is fundamentally important for the rational design of assemblies with optimal combination of properties and predictable tunability for specific applications. In this review, we summarize the recent advances in this area with a specific focus on the parameters and factors that influence thermoresponsive properties of soft materials. We summarize and analyze the effects of structures and architectures of molecules, hydrophilic and lipophilic balance, concentration, components and external additives upon the thermoresponsiveness of the corresponding molecular assemblies.

Bionic Biphasic Composite Scaffold with Osteochondrogenic Factors for Regeneration of Full-Thickness Osteochondral Defect

Full-thickness osteochondral defects lack the capability to self-repair owing to their complicated hierarchical structure. At present, clinical treatments including microfracture etc. have shown some efficacy; however, the newborn tissue exhibits...

Machine Learning-Driven Biomaterials Evolution

Biomaterials is an exciting and dynamic field, which uses a collection of diverse materials to achieve desired biological responses. While there is constant evolution and innovation in materials with time, biomaterials research has been hampered by the relatively long development period required. In recent years, driven by the need to accelerate materials development, the applications of machine learning in materials science has progressed in leaps and bounds. The combination of machine learning with high-throughput theoretical predictions and high-throughput experiments (HTE) has shifted the traditional Edisonian (trial and error) paradigm to a data-driven paradigm. In this review, each type of biomaterial and their key properties and use cases are systematically discussed, followed by how machine learning can be applied in the development and design process. The discussions are classified according to various types of materials used including polymers, metals, ceramics, and nanomaterials, and implants using additive manufacturing. Last, the current gaps and potential of machine learning to further aid biomaterials discovery and application are also discussed.

Coordination Strategy to Achieve Instant Dissolution of a Biomedical Polymer in Water via Manual Shaking

Organic polymers with condensed long chains are kinetically slow to be dissolved in their solvents, particularly in water, which has significantly hindered their potential applications as soon as an instant...

Hypothermic Stem Cell Storage Using a Polypeptide Thermogel

We report a polypeptide-based thermogel as a new tool for hypothermic storage of stem cells at ambient temperature (25 °C). Stem cells were suspended in the sol state (10 °C) of an aqueous poly(ethylene glycol)-poly(l-alanine) (PEG-PA) solution (4.0 wt %) in phosphate-buffered saline (PBS), which turned into a stem cell-incorporated gel by a heat-induced sol-to-gel transition. The cell harvesting procedure from the thermogels was simply performed through a gel-to-sol transition by diluting and cooling the system. More than 99% of stem cells died in PBS and Pluronic F127 thermogel (control thermogel) when the cells were stored at 25 °C for 7 days. The cell recovery rate from the PEG-PA thermogel (64%) was significantly greater than that from the commercially available HypoThermosol FRS preservation solution (HTS) (26%). Additionally, the surviving stem cells from the PEG-PA thermogel were healthier than those from HTS in terms of (1) expression of stemness biomarkers (NANOG, OCT4, and SOX2), (2) proliferation rate, and (3) differentiation potentials into osteogenic, chondrogenic, and adipogenic lineages. Membrane stabilization was suggested as a cell protection mechanism in the cytocompatible PEG-PA thermogel. The PEG-PA thermogel provides a convenient cytocompatible way for the storage and recovery of cells and thus is a promising tool for the transportation and short-term banking of cells.

Advanced Hydrogels for Cartilage Tissue Engineering: Recent Progress and Future Directions

Cartilage is a tension- and load-bearing tissue and has a limited capacity for intrinsic self-healing. While microfracture and arthroplasty are the conventional methods for cartilage repair, these methods are unable to completely heal the damaged tissue. The need to overcome the restrictions of these therapies for cartilage regeneration has expanded the field of cartilage tissue engineering (CTE), in which novel engineering and biological approaches are introduced to accelerate the development of new biomimetic cartilage to replace the injured tissue. Until now, a wide range of hydrogels and cell sources have been employed for CTE to either recapitulate microenvironmental cues during a new tissue growth or to compel the recovery of cartilaginous structures via manipulating biochemical and biomechanical properties of the original tissue. Towards modifying current cartilage treatments, advanced hydrogels have been designed and synthesized in recent years to improve network crosslinking and self-recovery of implanted scaffolds after damage in vivo. This review focused on the recent advances in CTE, especially self-healing hydrogels. The article firstly presents the cartilage tissue, its defects, and treatments. Subsequently, introduces CTE and summarizes the polymeric hydrogels and their advances. Furthermore, characterizations, the advantages, and disadvantages of advanced hydrogels such as multi-materials, IPNs, nanomaterials, and supramolecular are discussed. Afterward, the self-healing hydrogels in CTE, mechanisms, and the physical and chemical methods for the synthesis of such hydrogels for improving the reformation of CTE are introduced. The article then briefly describes the fabrication methods in CTE. Finally, this review presents a conclusion of prevalent challenges and future outlooks for self-healing hydrogels in CTE applications.

Locally Injectable Hydrogels for Tumor Immunotherapy

Hydrogel-based local delivery systems provide a good delivery platform for cancer immunotherapy. Injectable hydrogels can directly deliver antitumor drugs to the tumor site to reduce systemic toxicity and achieve low-dose amplification immunotherapy. Therefore, it may overcome the problems of low drug utilization rate and the systemic side effects in cancer immunotherapy through systemic immune drugs, and it provides simple operation and little invasion at the same time. This study aimed to review the research progress of injectable hydrogels in tumor immunotherapy in recent years. Moreover, the local delivery of multiple drugs using injectable hydrogels in tumors is introduced to achieve single immunotherapy, combined chemo-immunotherapy, combined radio-immunotherapy, and photo-immunotherapy. Finally, the application of hydrogels in tumor immunotherapy is summarized, and the challenges and prospects for injectable hydrogels in tumor immunotherapy are proposed.