Iron(III) selective molecular and supramolecular fluorescent probes

Cellulose-based fluorescent chemosensor with controllable sensitivity for Fe3+ detection

Polymer-based sensors, particularly those derived from renewable polymers, are gaining attention for their superior properties compared to organic small molecules. However, their complex preparation and poor, uncontrollable sensitivity have hindered further development. Herein, cellulose-based polymer photoluminescence (PL) chemosensors were fabricated using a straightforward and adjustable strategy. Specifically, water-soluble cellulose acetoacetate (CAA) was used as the substance for the in-situ synthesis of 1,4-dihydropyridine (DHPs) fluorescent rings on cellulose chains via a catalyst-free, room-temperature Hantzsch reaction. Benefiting from the synergetic through-space conjugation of DHPs rings and semi-rigid cellulose chains with heteroatoms, the sensors exhibit bright and stable PL properties. Based on this performance, the cellulose-based sensor excels in the specific recognition of Fe3+ in aqueous systems, showing exceptional selectivity, stability, and anti-interference performance due to the synergy between the inner filter effect (IFE) and intramolecular charge transfer (ICT). Theoretical calculations confirm the role of the extended π-conjugated structure at the DHPs-4 position in modulating the sensor sensitivity, achieving a low limit of detection (LOD) of 0.48 μM. Furthermore, the versatility of the Hantzsch reaction shows the potential of this strategy for developing a new generation of biomass-based polymer portable sensors for real-time and on-site detection.

Fluorimetric methods for determination of aluminum in water resources utilizing newly synthesized N,N'-bis(2,5-dihydroxybenzylidene)-4,4'-diamino diphenyl ether

Industrial waste contaimnation of water sources is a serious environmental problem. As a result, it's critical to identify metallic contamination in water with precision, sensitivity, and accuracy. In acetonitrile, the fluorimetric parameters of N,N-'bis(2,5-dihydroxybenzylidene)-4,4'-diamino diphenyl ether (DHDPE) and aluminum complex were determined. In the acetonitrile medium, the best fluorescence intensity of the DHDPE-Al complex was observed at λex = 280 nm, λem = 391 nm (excitation and emission wavelengths). For optimum complex formation, the ideal pH, duration, and temperature were 4.5, 20 min, and 25 °C, respectively. Within the ranges of 0.027-0.27 and 0.27-2.70 ppm aluminum concentrations, [Al3+]-F.I. Calibration graphs were linear. The fluorimetric aluminum measurement method was applied to diverse water sources using the newly synthesized macro molecular Schiff base DHDPE as the ligand. The aluminum concentration in water inflow to KOSKI (Konya Water and Sewerage Administration) was doubled as a result of the examination when compared to other samples of water.

Dual-Mode Sensing of Fe(III) Based on Etching Induced Modulation of Localized Surface Plasmon Resonance and Surface Enhanced Raman Spectroscopy

Convenient, rapid, highly sensitive and on-site iron determination is important for environmental safety and human health. We developed a sensing system for the detection of Fe(III) in water based on 7-mercapto-4-methylcoumarine (MMC)-stabilized silver-coated gold nanostars (GNS@Ag@MMC), exploiting a redox reaction between the Fe(III) cation and the silver shell of the nanoparticles, which causes a severe transformation of the nanomaterial structure, reverting it to pristine GNSs. This system works by simultaneously monitoring changes in the Localized Surface Plasmon Resonance (LSPR) and Surface-Enhanced Raman Spectroscopy (SERS) spectra as a function of added Fe(III). The proposed sensing system is able to detect the Fe(III) cation in the 1.0 × 10-5-1.5 × 10-4 M range, and its selectivity of the GNS@Ag@MMC sensor toward iron has been verified monitoring the LSPR and the SERS response to other cations with a clear selectivity toward Fe(III).

Vitamin B6 Cofactor Pyridoxal 5'-phosphate Conjugated Papain-Stabilized Fluorescent Gold Nanoclusters for Switch-on Detection of Zinc(II)

In this study, fluorescent gold nanoclusters (AuNCs) conjugated with pyridoxal-5-phosphate (PLP) were synthesized, characterized, and used for Zn2+ fluorescence turn-on sensing. PLP was conjugated over the surface of papain-stabilized fluorescent gold nanoclusters (pap-AuNCs; λex = 380 nm, λem = 670 nm) by forming imine linkage. Due to this modification, the red color emitting pap-AuNCs changed to orange color emitting nanoclusters PLP_pap-AuNCs. The nano-assembly PLP_pap-AuNCs detect Zn2+ selectively by showing a notable fluorescence enhancement at 477 nm. Zn2+ detection with PLP_pap-AuNCs was quick and easy, with an estimated detection limit of 0.14 µM. Further, paper strips and cotton buds coated with PLP_pap-AuNCs were developed for affordable on-site visual detection of Zn2+. Finally, the detection of Zn2+ in actual environmental water samples served as validation of the usefulness of PLP_pap-AuNCs.

Selective Adsorption of Dyes and Fe3+ Sensing via Tb3+ Incorporation in an Anionic Cadmium-Organic Framework

A three-dimensional (3D) anionic cadmium-organic framework, namely [(CH3)2NH2][Cd1.5(DMTDC)2] ⋅ 2DMA ⋅ 0.5H2O (Cd-MOF; DMA=N,N-dimethylacetamide), was successfully synthesized under solvothermal conditions by using a linear thienothiophene-containing dicarboxylate ligand, 3,4-dimethylthieno [2,3-b]-thiophene-2,5-dicar-boxylic acid (H2DMTDC). Single-crystal X-ray diffraction analysis reveals that Cd-MOF exhibits a 3D anionic framework with pcu α-Po topology, featuring rectangle and rhombus-shaped channels along b- and c- axis direction. Cd-MOF demonstrates selective adsorption of cationic dyes over anionic and neutral dyes. Additionally, Tb3+-loaded Cd-MOF serves as a fast-response fluorescence sensor for the sensitive detection of Fe3+ ions with a low limit of detection (8.90×10-7 M) through fluorescence quenching.

Biogenic fabrication of a gold nanoparticle sensor for detection of Fe3+ ions using a smartphone and machine learning

In recent years, smartphones have been integrated into rapid colorimetric sensors for heavy metal ions, but challenges persist in accuracy and efficiency. Our study introduces a novel approach to utilize biogenic gold nanoparticle (AuNP) sensors in conjunction with designing a lightbox with a color reference and machine learning for detection of Fe3+ ions in water. AuNPs were synthesized using the aqueous extract of Eleutherine bulbosa leaf as reductants and stabilizing agents. Physicochemical analyses revealed diverse AuNP shapes and sizes with an average size of 19.8 nm, with a crystalline structure confirmed via SAED and XRD techniques. AuNPs exhibited high sensitivity and selectivity in detection of Fe3+ ions through UV-vis spectroscopy and smartphones, relying on nanoparticle aggregation. To enhance image quality, we developed a lightbox and implemented a reference color value for standardization, significantly improving performance of machine learning algorithms. Our method achieved approximately 6.7% higher evaluation metrics (R 2 = 0.8780) compared to non-normalized approaches (R 2 = 0.8207). This work presented a promising tool for quantitative Fe3+ ion analysis in water.

Luminescent Silicon Nanocrystals as Metal Ion Sensors

At relatively low concentrations in aqueous solution, Fe3+, Fe2+, Cu2+, and Ni2+ quench the photoluminescence (PL) of the undecenoic acid-capped silicon (Si) nanocrystals. The PL could be restored by adding a chelating agent, such as ethylenediaminetetraacetic acid (EDTA), to remove the ions. Fe3+ and Cu2+ also significantly increase the PL lifetime. Other metal ions, including Cd2+, Mn2+, Pb2+, Zn2+, In3+, K+, and Ca2+, had no effect on the Si nanocrystal PL. The limits of detection (LODs) for Fe3+ and Cu2+ of 370 and 150 nM, respectively, are low enough for metal ion sensing applications.

Phenanthrothiophene-Triazine Star-Shaped Discotic Liquid Crystals: Synthesis, Self-Assembly, and Stimuli-Responsive Fluorescence Properties

Lipophilic biphenylthiophene- and phenanthrothiophene-triazine compounds, BPTTn and CPTTn, respectively, were prepared by a tandem procedure involving successive Suzuki-Miyaura coupling and Scholl cyclodehydrogenation reactions. These compounds display photoluminescence in solution and in thin film state, solvatochromism with increasing solvent's polarity, as well as acidochromism and metal ion recognition stimuli-responsive fluorescence. Protonation of BPTT10 and CPTT10 by trifluoroacetic acid results in fluorescence quenching, which is reversibly restored once treated with triethylamine (ON-OFF switch). DFT computational studies show that intramolecular charge transfer (ICT) phenomena occurs for both molecules, and reveal that protonation enhances the electron-withdrawing ability of the triazine core and reduces the band gap. This acidochromic behavior was applied to a prototype fluorescent anti-counterfeiting device. They also specifically recognize Fe3+ through coordination, and the recognition mechanism is closely related to the photoinduced electron transfer between Fe3+ and BPTT10/CPTT10. CPTTn self-assemble into columnar rectangular (Colrec) mesophase, which can be modulated by oleic acid via the formation of a hydrogen-bonded supramolecular liquid crystal hexagonal Colhex mesophase. Finally, CPTTn also form organic gels in alkanes at low critical gel concentration (3.0 mg/mL). Therefore, these star-shaped triazine molecules possess many interesting features and thus hold great promises for information processing, liquid crystal semiconductors and organogelators.

A ratiometric fluorescence probe for bisulfite detection in live cells and meat samples

The development of reliable probe technology for the detection of bisulfite (HSO3-) in situ in food and biological samples is contributing significantly to food quality and safety assurance as well as community health. In this work, a responsive probe, EHDI, is developed for ratiometric fluorescence detection of HSO3- in aqueous solution, meat samples, and living cells. The probe is designed based on the HSO3- triggered 1,4-addition of electron deficit C = C bond of EHDI. As a result of this specific 1,4-addition, the π-conjugation system was destructed, resulting in blue shifts of the emission from 687 to 440 nm and absorption from 577 to 355 nm. The probe has good water solubility, high sensitivity and selectivity, allowing it to be used for imaging of HSO3- internalization and production endogenously. The capability of probe EHDI for HSO3- was then validated by traditional HPLC technology, enabling accurately detect HSO3- in beef samples. The successful development of this probe thus offers a new tool for investigating HSO3- in situ in food and biological conditions.

Recent Advances in Detection of Hydroxyl Radical by Responsive Fluorescence Nanoprobes

Hydroxyl radical (•OH), a highly reactive oxygen species (ROS), is assumed as one of the most aggressive free radicals. This radical has a detrimental impact on cells as it can react with different biological substrates leading to pathophysiological disorders, including inflammation, mitochondrion dysfunction, and cancer. Quantification of this free radical in-situ plays critical roles in early diagnosis and treatment monitoring of various disorders, like macrophage polarization and tumor cell development. Luminescence analysis using responsive probes has been an emerging and reliable technique for in-situ detection of various cellular ROS, and some recently developed •OH responsive nanoprobes have confirmed the association with cancer development. This paper aims to summarize the recent advances in the characterization of •OH in living organisms using responsive nanoprobes, covering the production, the sources of •OH, and biological function, especially in the development of related diseases followed by the discussion of luminescence nanoprobes for •OH detection.

A novel fluorescent "Off-On" probe based on phenanthro[9,10-d]imidazole conjugated polymers (PIPF) for Cr3+ detection with high selectivity and sensitivity

Trivalent chromium (Cr3+) causes serious environmental pollution, degradation of the quality of edible agricultural products and human diseases. A novel phenanthro[9,10-d]imidazole-derived conjugated polymers (PIPF) was obtained from 4-(5,10-dibromo-1H-phenanthro[9,10-d]imidazol-2-yl)phenol and diethyl 4,4'-(2,7-bis(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-9H-fluorene-9,9-diyl)dibutyrate by Suzuki polymerization reaction, which was reasonably demonstrated by 1H NMR spectroscopy, infrared spectroscopy and quantum chemical calculations. The PIPF exhibits a "turn-on" fluorescence response to Cr3+ in DMSO/H2O (98:2, v/v) with naked-eye detection. The limit of detection for Cr3+ was calculated to be 0.073 μM with a linear range of 3-9 μM. The possible mechanism of the PIPF-based Cr3+ fluorescence "turn-on" sensor is due to the inhibition of the PET process by the coordination of Cr3+ to the hexaalkyl ester carbon chain of PIPF (RCOO-). The high sensitivity, good selectivity, and utility of this sensor indicated that PIPF-based "turn-on" fluorescence sensor is a potential fluorescence application for measuring Cr3+ in environmental samples.

Double-cavity cucurbiturils: synthesis, structures, properties, and applications

Double-cavity Q[n]s are relatively new members of the Q[n] family and have garnered significant interest due to their distinctive structures and novel properties. While they incorporate n glycoluril units, akin to their single-cavity counterparts, their geometry can best be described as resembling a figure-of-eight or a handcuff, distinguishing them from single-cavity Q[n]s. Despite retaining the core molecular recognition traits of single-cavity Q[n]s, these double-cavity variants introduce fascinating new attributes rooted in their distinct configurations. This overview delves into the synthesis, structural attributes, properties, and intriguing applications of double-cavity Q[n]s. Some of the applications explored include their role in supramolecular polymers, molecular machinery, supra-amphiphiles, sensors, artificial light-harvesting systems, and adsorptive separation materials. Upon concluding this review, we discuss potential challenges and avenues for future development and offer valuable insights for other scholars working in this area with the aim of stimulating further exploration and interest.

The Monitoring and Cell Imaging of Fe3+ Using a Chromone-Based Fluorescence Probe

A new structurally simple fluorescent CP probe based on chromone was designed and synthesized, and its structure was fully characterized using various analytical techniques. The CP probe displays a high selectivity and sensitivity for sensing Fe3+ with a "turn-off" fluorescence response over other metal ions in a DMSO/H2O (4:1, v/v) solution. The experiment results show that the CP probe is stable over a wide pH range of 2.0-12.0. The detection limit for Fe3+ was calculated to be 0.044 μmol•L-1. The molar ratio method indicated that the binding mode between the CP probe and Fe3+ is a 1:1 complex formation. HR-MS and density functional theory (DFT) calculations were also performed to further confirm the recognition mechanism. Both fluorescence imaging experiments and the MTT assay demonstrated that the CP probe was suitable for detecting intracellular Fe3+ and no significant cytotoxicity in living cells.

Porous organic polymers-based fluorescent chemosensors for Fe(III) ions-a functional mimic of siderophores

Extended organic polymers such as amorphous Covalent Organic Polymers (COPs) and crystalline Covalent Organic Frameworks (COFs) are emerging functional polymeric materials that have recently been shown promises as luminescent materials for chemosensing applications. A wide variety of luminescence COPs and COFs have been synthesized and successfully used as fluorescence-sensing materials for hazardous environmental pollutants and toxic contaminants. This review exemplifies various COPs and COFs-based fluorescence sensors for selective sensing of Fe(III) ions. The fluorescence sensors are sorted according to their structural features and each section provides a detailed discussion on the synthesis and fluorescence sensing ability of different COPs and COFs towards Fe(III) ions. Also, this review highlights the limitations of the existing organic polymer-based chemosensors and future perspectives on translating COPs and COFs-based fluorescence sensors for the practical detection of Fe(III) ions.

Fluorescence-based ratiometric sensors as emerging tools for CN- detection: Chemical structures, sensing mechanisms and applications

Hazardous cyanide anions (CN-) are increasingly threatening the environment and human health due to their widespread use in industry and many other fields. Over the past three decades, a large number of probes have been reported to sensitively and selectively detect this toxic anion, while a rather limited number of ratiometric fluorescent probes have been developed. The ratiometric probes have significant potential in bio-imaging and biomedical applications because of the ability to detect CN- in a quick, convenient and affordable way. In this review, we introduce 42 ratiometric fluorescent probes reported in the past 6 years (2018-2023) for CN- detection. Our description includes the chemical structures, photo-physical properties, CN- sensing mechanisms, solution color changes, limits of detection (LODs) and/or various applications of these chemical probes. This review provides guidelines for design and development of a new ratiometric probe for effective CN- detection.

A novel [1, 2, 4]triazolo[5,1-b]quinazoline derivative as a fluorescent probe for highly selective detection of Fe3+ ions

A novel [1, 2, 4]triazolo[5,1-b]quinazoline fluorescent probe (VIi) for Fe3+ was developed, featuring with rapid response (< 5 s) and specific selectivity to Fe3+, low detection limit (1.3 × 10-5 M), as well as the ability to resist interference of chelating agent (e.g. EDTA). VIi-based fluorescent test paper can quickly recognize Fe3+ under irradiation at the wavelength of 365 nm. The fluorescence probe VIi has potential application prospects for the detection of Fe3+ in real circumstance.

Synthesis of Di(thiophen-2-yl) Substituted Pyrene-Pyridine Conjugated Scaffold and DFT Insights: A Selective and Sensitive Colorimetric, and Ratiometric Fluorescent Sensor for Fe(III) Ions

In this context, we used the multicomponent Chichibabin pyridine synthesis reaction to synthesize a novel di(thiophen-2-yl) substituted and pyrene-pyridine fluorescent molecular hybrid. The computational (DFT and TD-DFT) and experimental investigations were performed to understand the photophysical properties of the synthesized new structural scaffold. The synthesized ligand displays highly selective fluorescent sensing properties towards Fe3+ ions when compared to other competitive metal ions (Al3+, Ba2+, Ca2+, Cd2+, Co2+, Cr3+, Cu2+, Fe2+, Hg2+, Na+, Ni2+, Pb2+, Sr2+, Sn2+ and Zn2+). The photophysical properties studies reveal that the synthesized hybrid molecule has a binding constant of 2.30 × 103 M-1 with limit of detection (LOD) of 4.56 × 10-5 M (absorbance mode) and 5.84 × 10-5 M (emission mode) for Fe3+ ions. We believe that the synthesized pyrene-conjugated hybrid ligand can serve as a potential fluorescent chemosensor for the selective and specific detection of Fe3+ ions.

Rhodamine-based Fluorescent Probe With Quick Response and High Selectivity for Imaging Labile Ferrous Iron in Living Cells and Zebrafish

The transition between its various oxidation states of Iron plays a crucial part in various chemical transformation of cells. Misregulation of iron can give rise to the iron-catalyzed reactive oxygen species disorder which have been linked to a variety of diseases, so it is crucial to monitor the labile iron pool in vivo for clinical diagnosis. According to iron autoxidation and hydrogen abstraction reaction, we reported a novel "off-on" fluorescent probe to response to ferrous (Fe2+) both in solutions and biological systems. The probe responds to Fe2+ with good selectivity toward competing metal ions. What's more, the probe presents significant fluorescent enhancement to Fe2+ in less than 1 min, making real-time sensing in biological system possible. The applications of the probe in bioimaging revealed the changes in labile iron pool by iron autoxidation or diverse stimuli.

Cellulose/amylose derivatives bearing bulky substituents as reversible fluorescent sensors for detection of Fe3

Two novel cellulose and amylose derivatives bearing bulky tris(2-benzothienylformate) pendants (Cel-3 and Amy-3) were expeditiously prepared by one-step esterification. The fluorescent sensing performance of six polysaccharide derivatives, including Cel-3/Amy-3, and other four previously prepared benzothienyl- or benzofuranyl-phenylcarbamates of cellulose and amylose (Cel-1/Amy-1, Cel-2/Amy-2), were carefully evaluated using eight metal ions, including Co2+, K+, Na+, Li+, Hg2+, Ni2+, Ca2+ and Fe3+. All six derivatives exhibited excellent fluorescence quenching property to Fe3+ ions with high sensitivity and selectivity. Especially, the limit of detection of Amy-2 with benzofuranylphenylcarbamates for Fe3+ was 3.0 μM, much lower than the maximum contaminant level for Fe3+ in the drinking water. Additionally, the six bulky derivatives displayed the interesting fluorescence "turn-off" and "turn-on" observation, indicating a desirable reversibility for Fe3+ detection. The high anti-interference ability was also observed for detection of Fe3+ on the benzothienyl/benzofuranyl derivatives of cellulose and amylose in the combined system containing Co2+, K+, Na+, Li+, Hg2+, Ni2+ and Ca2+. It suggested that the obtained polysaccharide derivatives with bulky chromophores possessed good potentials for detection of Fe3+ as high-efficient fluorescent sensors in diverse applications. The sensing mechanism for detection of Fe3+ was further proposed based on the Stern-Volmer plots and fluorescence titration analysis.

A single probe for solvent dependent optical recognition of iron(II/III) and arsenite: discrimination between iron redox states with single crystal X-ray structure evidence

The detection and discrimination of Fe2+ and Fe3+ ions have been investigated using a simple probe (L), produced by the condensation of ethylenediamine and 3-ethoxysalicyaldehyde. Single crystal X-ray structures demonstrate that L interacts with Fe2+ and Fe3+. In aqueous-DMSO media, the L recognises AsO2- by fluorescence and colorimetry techniques. The AsO2- aided PET inhibition and H-bond assisted chelation enhanced fluorescence (CHEF) boost fluorescence by 91-fold. The L can detect 0.354 ppb Fe2+, 0.22 ppb Fe3+ and 0.235 ppt AsO2-.

Metal ion-induced assembly of dipeptide-attached perylenediimide for fluorometric "turn on" detection of biologically important small molecule

A dipeptide-appended perylenediimide (PDI-CFF) fluorescent molecule was designed, synthesized, and characterized. Though the molecule does not dissolve in any individual solvent, it dissolves well in an organic/water mixed solvent system such as tetrahydrofuran/water. This new fluorescent molecule was self-assembled in a tetrahydrofuran/water mixture to form both nanofibrous network structures and a nano ring structure. It has shown nanofibril morphology by the interactions with ferric ions (PDI-CFF/Fe3+ system) with diminishing fluorescent property. Interestingly, L-ascorbic acid (LAA) interacts with the PDI-CFF/Fe3+ system, showing turn-on fluorescence. Another interesting feature is that the minimum detection limits for Fe3+ ions and LAA are at the submicromolar levels of 6.2 × 10-8 and 3 × 10-8  M, respectively. Moreover, the fluorescent (10 μM) signals can be monitored by the naked eye under handheld UV lamp irradiation at 365 nm, and this is very convenient for the real application. In this study, the molecule offers the opportunity for processing these sequential fluorescence responses in order to fabricate a implication logic gate that includes NOT, AND, and OR simple logic gates using chemical stimuli (ferric ions and LAA) as inputs and fluorescence emission at 536 nm as output. The detailed mechanism of interactions of Fe3+ with PDI-CFF and LAA with the PDI-CFF/Fe3+ system is vividly studied by using Fourier transform infrared (FT-IR) analysis and fluorescence. Moreover, this new molecule was reusable for several times without significant loss of its activity. The construction of logic gates using biologically important molecules/ions holds future promise for the design and development of new bio-logic gates.

Selective Fluorescent Sensing for Iron in Aqueous Solution by A Novel Functionalized Pillar[5]arene

Iron ion is one of the most physiologically important elements in metabolic processes, indispensable for all living systems. Since its excess can lead to severe diseases, new approaches for its monitoring in water samples are urgently needed to meet requirements. Here, we firstly report a novel and universal route for the synthesis of a series of pillar[n]arene derivates containing one benzoquinone unit by photocatalysis. With this in hand, an anthracene - appended water - soluble pillar[5]arene (H) with excellent fluorescence sensing potency was prepared. H enabled the ultrasensitive detection of iron ions in aqueous solution with limits of detection of 10-8  M. Over a wide range of metal ions, H exhibited specific selectivity toward Fe3+ . More importantly, H could still properly operate in a simulated sewage sample, coexisting with multiple interference ions.

A Simple Schiff Base Probe for Quintuplicate-Metal Analytes with Four Emission-Wavelength Responses

A versatile mono-Schiff compound consisting of o-aminobenzene-hydroxyjulolidine (ABJ-MS) has been easily synthesized using a one-step reaction. ABJ-MS displays four diverse fluorescence responses to the addition of Zn2+/Al3+/Fe3+/Ag+, with the maximum fluorescence emission at 530 nm undergoing a hypsochromic shift to 502/490/440/430 nm, synchronously with the discriminating fluorescence enhancement being 10.6/22.8/2.6/7.1-fold, respectively. However, the addition of Cu2+ into ABJ-MS leads to an opposite behavior, namely, fluorescence quenching. Meanwhile, ABJ-MS also displays distinct absorption changes after adding these five metal ions due to different binding affinities between them and ABJ-MS, which gives ABJ-MS quite a versatile detecting nature for Cu2+/Zn2+/Al3+/Fe3+/Ag+. Moreover, ABJ-MS can mimic a series of versatile AND/OR/INH-consisting logic circuits on the basis of the Cu2+/Zn2+/Al3+/Fe3+/Ag+-mediated diverse optical responses. These will endow the smart ABJ-MS molecule and potential applications in the multi-analysis chemosensory and molecular logic material fields.

Acylhydrazone functionalized naphthalene-based self-assembled supramolecular gels for efficient fluorescence detection of Fe3

A new gel factor (named N) has been successfully designed and synthesized, which contains the conventional fluorophore naphthalene with the acylhydrazone bond as the self-assembly site. It can be self-assembled into stable organogels (named ON) in dimethyl sulfoxide (DMSO) and water mixed medium (V : V = 4 : 1) with a critical gel temperature and concentration (55 °C and 10 mg mL-1). Interestingly, under 365 nm UV light, the ON exhibits bright yellow Aggregation Induced Emission (AIE). The supramolecular organogel ON shows a fluorescent "OFF" response to the metal ions Fe3+, and the state of the gel ON remains constant before and after detection. Notably, the minimum detection limits (LODs) of the gel ON for Fe3+ are as low as 1.30 × 10-7 M. The binding mechanism of supramolecular organogels (ON) to ions has been investigated through a series of characterizations. Meanwhile, the organogel sensor ON can also be used as an ion-responsive membrane for the detection of Fe3+ in the aqueous phase.

Recent developments in the creation of a single molecular sensing tool for ternary iron (III), chromium (III), aluminium (III) ionic species: A review

Rational design of a molecular sensing tool is an important topic in molecular recognition, signalling, and optoelectronics that has piqued the interest of chemists, biologists, and environmental scientists. Approximately 150 years have passed since the beginning of the fluorescent chemosensor sector. Due to the paramagnetic properties of Cr3+ and Al3+ , it is tough to prepare a photoluminescence plug-in detector. Most dye-based Al3+ sensors must be utilized in organic or mixed solvents for robust hydration of Al3+ in water. The sophisticated molecular design of sensors, conversely, allows for the detection of these metal ions in aqueous medium. The design of chemosensors using various fluorophores and their mechanisms of action have been thoroughly discussed. A literature survey covering the design of chemosensors and their mechanisms of action have been thoroughly discussed covering the period 2010-2022 and that was carried out including innovative and exemplary activities from numerous groups throughout the world that have significantly contributed to this sector. The most important advantages of these probes are their aqueous solubility and quick response with outstanding selectivity and sensitivity for temporal distribution with high fidelity of metals in living cells.

One-step hydrothermal synthesis of near-infrared emission carbon quantum dots as fluorescence aptamer sensor for cortisol sensing and imaging

Fluorescence carbon quantum dots (CQDs) have been widely applied to sensing and bioimaging. In this paper, near-infrared carbon quantum dots (NIR-CQDs) were prepared through a simple one-step hydrothermal approach using reduced glutathione and formamide as raw materials. Based on NIR-CQDs, aptamer (Apt) and graphene oxide (GO) has been applied to fluorescence sensing cortisol. NIR-CQDs-Apt adsorbed to the surface of GO through π-π stacking and an inner filter effect (IFE) occurred between NIR-CQDs-Apt and GO leading to NIR-CQDs-Apt fluorescence "off". The IFE process is disrupted in the presence of cortisol, allowing NIR-CQDs-Apt fluorescence "on". This led us to construct a detection method with excellent selectivity over other cortisol sensors. The sensor can detect cortisol from 0.4 to 500 nM and has a detection limit as low as 0.13 nM. Importantly, this sensor can be used to detect intracellular cortisol with excellent biocompatibility and cellular imaging capabilities, which is promising for biosensing.

Alkyl Chain Appended Fe(III) Catecholate Complex as a Dual-Modal T1 MRI-NIR Fluorescence Imaging Agent via Second Sphere Water Interactions

The C₁₂-alkyl chain-conjugated Fe(III) catecholate complex [Fe(C₁₂CAT)₃]^3-, Fe(C₁₂CAT)₃ [C₁₂CAT = N-(3,4-dihydroxyphenethyl)dodecanamide], was synthesized and characterized, reported as a dual-modal T₁-MRI and an optical imaging probe. The DFT-optimized structure of Fe(C₁₂CAT)₃ reveals a distorted octahedral coordination geometry around the high spin Fe(III) center. The formation constant (-log K) of Fe(C₁₂CAT)₃ was calculated as 45.4. The complex exhibited r₁-relaxivity values of 2.31 ± 0.12 and 1.52 ± 0.06 mM^-1 s^-1 at 25 and 37 °C, respectively, on 1.41 T at pH 7.3 via second-sphere water interactions. The interaction of Fe(C₁₂CAT)₃ with human serum albumin showed concomitant enhancement of r₁-relaxivity to 6.44 ± 0.15 mM^-1 s^-1. The MR phantom images are significantly brighter and directly correlate to the concentration of Fe(C₁₂CAT)₃. Adding an external fluorescent marker IR780 dye to Fe(C₁₂CAT)₃ leads to the formation of self-assembly by C₁₂-alkyl chains. It resulted in the fluorescence quenching of the dye, and its critical aggregation concentration was calculated as 70 μM. The aggregated matrix of Fe(C₁₂CAT)₃ and IR780 dye is spherical, with an average hydrodynamic diameter of 189.5 nm. This self-assembled supramolecular system is found to be non-fluorescent and was "turn-on" under acidic pH via dissociation of aggregates. The r₁-relaxivity is found to be unchanged during the matrix aggregation and disaggregation. The probe showed MRI ON and fluorescent OFF under physiological conditions and MRI ON and fluorescent ON under acidic pH. The cell viability experiments showed that the cells are 80% viable at 1 mM probe concentration. Fluorescence experiments and MR phantom images showed that Fe(C₁₂CAT)₃ is a potential dual model imaging probe to visualize the acidic pH environment of the cells.

Comprehensive Insights into Medicinal Research on Imidazole-Based Supramolecular Complexes

The electron-rich five-membered aromatic aza-heterocyclic imidazole, which contains two nitrogen atoms, is an important functional fragment widely present in a large number of biomolecules and medicinal drugs; its unique structure is beneficial to easily bind with various inorganic or organic ions and molecules through noncovalent interactions to form a variety of supramolecular complexes with broad medicinal potential, which is being paid an increasing amount of attention regarding more and more contributions to imidazole-based supramolecular complexes for possible medicinal application. This work gives systematical and comprehensive insights into medicinal research on imidazole-based supramolecular complexes, including anticancer, antibacterial, antifungal, antiparasitic, antidiabetic, antihypertensive, and anti-inflammatory aspects as well as ion receptors, imaging agents, and pathologic probes. The new trend of the foreseeable research in the near future toward imidazole-based supramolecular medicinal chemistry is also prospected. It is hoped that this work provides beneficial help for the rational design of imidazole-based drug molecules and supramolecular medicinal agents and more effective diagnostic agents and pathological probes.

Iminobenzophenone-thiophen hydrazide schiff base: a selective turn on sensor for paramagnetic Fe3+ ion and application in real sample analysis

A highly selective turn-on sensor for paramagnetic Fe³⁺ ions based on (E)-N'-((2-aminophenyl)(phenyl)methylene)thiophene-2-carbohydrazide is successfully synthesized. The sensor BPTH is significantly selective and sensitive towards Fe³⁺ ions over other interfering metal ions especially Cu²⁺ and Co²⁺ ions with a lowest limit of recognition 1.48 × 10^-7 M. The turn-on sensing mechanism involves enhanced charge transfer. Fe³⁺ ion forms strong binding with the ligand with a K_a value about 8.23 × 10⁴ M^-1 and a 1:1 stoichiometric ratio is confirmed by Job's plot experiment. With Fe³⁺ ion, the yellow ligand BPTH change to a green fluorescent and reversible with 1 equivalent of EDTA. Practical application of sensor is demonstrated in real sample analysis.

Diethylenetriamine-β-CD-modified carbon quantum dots for selective fluorescence sensing of Hg2+ and Fe3+ and cellular imaging

Diethylenetriamine-β-cyclodextrin-modified carbon quantum dots (3 N-CQDs) were synthesized via a one-step hydrothermal method using citric acid as the carbon source and diethylenetriamine-β-cyclodextrin (3 N-β-CD) as the nitrogen source. The successful preparation of 3 N-CQDs were revealed by infrared absorption spectroscopy, ultraviolet (UV)-visible absorption spectroscopy, fluorescence spectroscopy, XRD, XPS, TEM, and TG. Further spectroscopic studies showed that the synthesized carbon quantum dots offered good anti-interference capability. The relative fluorescence quantum yield was 67.2 %. The limits of detection for Hg²⁺ and Fe³⁺ were 0.25 µM and 0.57 μM, respectively. Cytotoxicity and imaging studies showed that the prepared carbon quantum dots had low cytotoxicity, good biocompatibility, and good cellular imaging capability for HeLa cells. They offered fluorescent sensing of Hg²⁺ and Fe³⁺ in live cells. Therefore, 3 N-CQDs were ideal fluorescent probes for the detection of Hg²⁺ and Fe³⁺ in water.

Preparation of temperature-responsive nanomicelles with AIE property as fluorescence probe for detection of Fe3+ and Fe2

Temperature-responsive nanomicelles with aggregation induced emission (AIE) property were prepared by the host-guest complexation of ferrocene functionalized tetraphenyl (TPE-Fc) and β-cyclodextrin-poly (N-isopropylacrylamide) (β-CD-(PNIPAM)₇). The AIE chromophore TPE-Fc bound to the hydrophobic cavity of cyclodextrin serves as the core of micelles, and temperature sensitive PNIPAM serves as the shell to give the micelles good solubility. The size of the nanomicelles is about 100 nm. At the excitation wavelength of 340 nm, the strongest fluorescent emission peak was 421 nm. The introduction of cyclodextrin star polymer increased the fluorescence intensity of nanomicelles, thus improving the recognition of probe to Fe³⁺ and Fe²⁺. The fluorescent probe can quickly detect Fe³⁺ and Fe²⁺ in water within 5 min even in the presence of various interfering ions. The detection limits of Fe³⁺ and Fe²⁺ were 1.04 μM and 0.78 μM, respectively in the range of 10-90 μM. The formation of complex between the probe and Fe³⁺/Fe²⁺ was supported by Job's plot. The probe was successfully applied to the detection of Fe³⁺and Fe²⁺ in actual water sample with a good recovery. In addition, a possible sensing mechanism for the interaction of iron ions with amide bond groups of nanomicelles was proposed.

A colorimetric and fluorometric dual-mode carbon dots probe derived from phenanthroline precursor for the selective detection of Fe2+ and Fe3

Iron's metabolism is heavily involved in the regulation of redox balance for cell functions, however, the simultaneous monitoring of Fe^2+/3+ concentration is still a great challenge due to their transitional nature in biological systems. A novel type of carbon dots (CDs) was synthesized by solvothermal treatment with 5-amino-1,10-phenanthroline (Aphen) and salicylic acid as precursors, and the resulting targeted CDs (T-CDs) were used to simultaneously detect Fe²⁺ and Fe³⁺. Comprehensive experimental characterizations revealed that the strong binding affinity of Aphen moiety to Fe²⁺ leads to the formation of rigid T-CDs aggregates, which causes a substantial enhancement of fluorescence intensity, whereas Fe³⁺ could cause the fluorescence quenching of T-CDs due to the oxidation-reduction induced electron transfer. These different fluorescence responses allow T-CDs to sensitively differentiate Fe²⁺ from Fe³⁺, and give the limit of detection (LOD) of 1.78 and 2.78 μM for Fe²⁺ and Fe³⁺, respectively. Furthermore, the Aphen dominated structure endows the T-CDs with a colorimetric response to Fe²⁺ with a LOD of 0.13 μM, which is very different from Fe³⁺. Thus, the dynamic changes of Fe²⁺ and Fe³⁺ in solution can be accurately monitored by T-CDs within the total iron concentration of 50 μM, which is probably the most sensitive dual-mode probe reported so far. In addition, this probe is successfully applied to detect the Fe^2+/3+ concentration in cells, demonstrating a huge application potential in the sensing of the dynamic equilibrium of these important transition metals during the cell metabolism or stimulated process. The dynamic changes of Fe²⁺ and Fe³⁺ in solution can be accurately monitored by carbon dots based on the colorimetric and fluorometric dual-mode.

Fluorescent Probes for Biological Species and Microenvironments: from Rational Design to Bioimaging Applications

Some important biological species and microenvironments maintain a complex and delicate dynamic balance in life systems, participating in the regulation of various physiological processes and playing indispensable roles in maintaining the healthy development of living bodies. Disruption of their homeostasis in living organisms can cause various diseases and even death. Therefore, real time monitoring of these biological species and microenvironments during different physiological and pathological processes is of great significance. Fluorescent-probe-based techniques have been recognized as one of the most powerful tools for real time imaging in biological samples. In this Account, we introduce the representative works from our group in the field of fluorescent probes for biological imaging capable of detecting metal ions, small bioactive molecules, and the microenvironment. The design strategies of small molecule fluorescent probes and their applications in biological imaging will be discussed. By regulating the design strategy and mechanism (e.g., ICT, PeT, and FRET) of the electronic and spectral characteristics of the fluorescent platforms, these chemical probes show high selectivity and diverse functions, which can be used for imaging of various physiological and pathological processes. Through the exploration of the rational response mechanism and design strategy, combined with a variety of imaging techniques, such as super-resolution imaging, photoacoustic (PA) imaging, etc., we have realized multimode imaging of the important biological analytes from the subcellular level to the in vivo level, which provides powerful means to study the physiological and pathological functions of these species and microenvironments. This Account aims to offer insights and inspiration for the development of novel fluorescent probes for biological imaging, which could provide powerful tools for the study of chemical biology. Overall, we represent a series of turn-on/turn-off/ratiometric fluorescent/PA probes to visually and dynamically trace biological species and microenvironments in cells and even in vivo that seek higher resolution and depth molecular imaging to improve diagnostic methods and clarify new discoveries related to chemical biology. Our future efforts will be devoted to developing multiorganelle targeted fluorescent probes to study the mechanism of subcellular organelle interaction and employing various dual-mode probes of NIR II and PA imaging to investigate the development of related diseases and treat the related diseases at subcellular and in vivo levels.

Determination of trace amount of iron cations using electrochemical methods at N, S doped GQD modified electrode

In this work, nitrogen and sulfur co-doped graphene quantum dot-modified glassy carbon electrodes (N, S-GQD/GCE) were used for the recognition of iron cations in aqueous solutions. The dissolved cations are detected based on the faradaic reduction or oxidation current of Fe(III) and Fe(II) obtained at the N, S-GQD/GCE surface. Cyclic voltammetry (CV), square wave voltammetry (SWV), and hydrodynamic amperometry are used as suitable electrochemical techniques for studying electrochemical behavior and determination of Fe cations. Based on the obtained results, it is concluded that the presence of free electrons in the structure of N, S-GQD could facilitate electron transfer reaction between Fe(III) and electrode surface which with increased surface area results in increased sensitivity and lower limit of detection. By performing suitable experiments, the best condition for preparing the modified electrode and determining Fe(III) was selected. Under optimized conditions, the amperometric response is linear from 1 to 100 nM of Fe(III) with a detection limit of 0.23 nM. The validity of the method and applicability of the sensor is successfully tested by the determination of Fe(III) in drug and water real samples. This sensor opened a new platform based on doped nanoparticles for highly sensitive and selective detection of analytes.

An efficient ethylcellulose fluorescent probe for rapid detection of Fe3+ and its multi-functional applications

Fe³⁺ is the most abundant essential transition metal ion in the human body, plays a vital role in biological and environmental systems. Ethyl cellulose is one of the derivatives of cellulose. Herein, a novel ethylcellulose fluorescent probe EC-HPCB for detecting Fe³⁺ was prepared by grafting a flavonol derivative as both fluorophore and selective recognition group. The probe exhibited a highly specific "turn-off" fluorescence response to Fe³⁺, and the fluorescence color changed from yellow to colorless in the presence of Fe³⁺. The detection limit of EC-HPCB for Fe³⁺ was 2.65 × 10^-7 mol/L, and the response time was as quick as 2 min. The detection mechanism was confirmed by ¹H NMR and DFT calculations. Based on the good solubility and processability in organic solvent, EC-HPCB was made into coating and film with favorable fluorescent performances. Furthermore, EC-HPCB probe was successfully applied to monitor Fe³⁺ in real water samples, and the EC-HPCB-loaded filter paper provided a solid-state platform for detecting Fe³⁺ by naked eye and fluorescence method.

Benzilbis(2-hydroxyanil) – highly efficient ligand for ferric ion (Fe3+) sensing

Benzilbis(2-hydroxyanil) was found to be an efficient and selective turn-on fluorophore for ferric ion (Fe3+) sensing.

Insights of metal 8-hydroxylquinolinol complexes as the potential anticancer drugs

8-Hydroxyquinoline and its derivatives, which belong to a well-known class of quinoline based drugs with varied biological activities, have been extensively explored for the treatments of cancer, Alzheimer's disease, neurodegenerative diseases and other life-threatening diseases. In virtue of the existence of bicyclic heterocyclic scaffold, their bidentate chelators can further bind to metal ions via O- and N-donors from 8-hydroxylquinolinol skeletons to yield a variety of metal 8-hydroxylquinolinol complexes appealing as the anticancer drugs with low toxicity, due to their better biological effects and higher anticancer activities than free 8-hydroxylquinolinol ligands and cis-diammine-dichloro-platinum. The present review summarizes the recent developments in the syntheses, crystal structures, and anticancer activities of metal 8-hydroxylquinolinol complexes, attempting to discover a correlation between their structures and anticancer activities, and to provide an evidence for their potential application perspectives. It means to offer the helpful and meaningful guidance for the researchers in the future syntheses of new and highly efficient anticancer metal 8-hydroxylquinolinol complexes based drugs.

A Colorimetric Distinct Color Change Cu(II) 4-{[1-(2,5-dihydroxyphenyl)ethylidene]amino}-1,5-dimethyl-2-phenyl-1,2-dihydro-3H-pyrazol-3-one Chemosensor and its Application as a Paper Test Kit

In the current research work "4-{[1-(2,5-dihydroxyphenyl)ethylidene]amino}-1,5-dimethyl-2-phenyl-1,2-dihydro-3H-pyrazol-3-one" chemosensor (C1) synthesized by condensation reaction using "4-amino-1,2-dihydro-1,5-dimethyl-2-phenylpyrazol-3-one" and "2,5-dihydroxy actophenone" was used as the effective sensor of metal ion. The C1 shows absorption peak at 326 nm due to the C = C bond (π-π* transition), while the absorption peak at 364 nm is caused by the C = O bond (n-π* transition). In the presence of copper, C1 only demonstrated a redshift in absorption peak from 364 to 425 nm. Even in the presence of other competing metal ions, the hypsochromic shift of the absorption band and the quenching of the fluorescence emission intensity were different for detecting Cu²⁺, in CH₃OH-H₂O (v/v = 6:4). The capacity of the C1 to bind with Cu²⁺ was further proved using DFT simulations. The complex C1 + Cu²⁺ has a HOMO-LUMO energy gap of 2.8002 eV, which is lesser than C1 (2.9991 eV) showing improvement in the stability of the C1 + Cu²⁺ complex. Using the Benesi-Hildebrand and Scatchard plots, calculated Kb values were to be 47,340 and 48369 M^-1 respectively, showing the creation of stable complexation between Cu²⁺ and C1 with 1:1 stoichiometry. The limit of detection (LOD) for Cu²⁺ ion was 649 nM. Strip sheets were also built and tested to detect varying amounts of Cu²⁺ in aqueous solution, and their color change suggested that they might be used for on-site Cu²⁺ detection in polluted water.

Fast preparation of Eu(BTB) MOFs in dielectric barrier discharge liquid plasma for luminescent sensing of trace iron

Lanthanide metal-organic frameworks Eu(BTB) MOFs was synthesized in low-temperature plasma produced by dielectric barrier discharge (DBD). This DBD synthesis possesses the characteristics of rapid reaction (within 20 min), mild condition (low temperature and atmospheric pressure) and simple operation compared with many traditional synthesis methods. The prepared Eu(BTB) MOF material exhibits typical red light emitting of europium (Eu³⁺ ) at 617 nm, which can selectively and sensitively be quenched in the presence of trace iron(III) ion (Fe³⁺ ). A simple, fast and sensitive fluorescence sensing strategy of Fe³⁺ was thus constructed, with a limit of detection (LOD) of 0.5 μM. Compared with reported fluorescence probes, Eu(BTB) MOFs have also demonstrated the advantages of low cost, easy and fast preparation, great stability, and excellent optical properties, thus making them a promising fluorescence candidate for trace Fe³⁺ sensing for the potential application in biological systems in the future.

Novel schiff base as Fe3+ sensor as well as an antioxidant and its theoretical studies

A novel Schiff base derivative L (N1-(thiophene-2-ylmethylene)benzene-1,2-diamine) was synthesized via condensation reaction of 3-thiophene carboxaldehyde and 1,2-diamino benzene. The synthesized compound was authenticated using 1 H NMR, 13 C NMR, HRMS, and IR spectroscopy. The compound L was found to be a Fe3+ sensor with the complexation ratio of 1 : 3 as revealed by Job’s plot with maximum absorption at 318 nm. The photophysical properties were studied using absorption and emission spectra. DFT and TD-DFT studies were carried out in order to support the photophysical outcomes of compound L. An antioxidant behaviour of compound L was studied using TAC, FRAP, and DPPH assays and it was found to be showing better TAC activity than the used standard i.e. gallic acid.

Dipicolylamine-Based Fluorescent Probes and Their Potential for the Quantification of Fe3+ in Aqueous Solutions

We have synthesized two ligand systems, N(SO2)(R1)dpa (L1) and N(SO2)(R2)dpa (L2), where R1 = biphenyl and R2 = azobenzene, which are sulfonamide derivatives of the NNN-donor chelating dipicolylamine. Both L1 and L2 can be used as sensors for detecting Fe3+ and are highly sensitive and selective over a wide range of common cations. Time-dependent density functional theory (TDDFT) calculations confirmed that the key excitations of L2 and the [Fe(L2)(H2O)3]3+ model complex involve -R2-unit-based π and π* charge transfer. L2 demonstrates a relatively high photostability, a fluorescence turn-on mechanism, and a detection limit of 0.018 μM with 1.00 μM L2 concentration, whereas L1 has a detection limit of 0.67 μM. Thus, both ligands have the potential to be used as fluorosensors for the detection of Fe3+ in aqueous solutions.